LIQUIfit - docs.pneumatiek.nl · The Parker-Legris production process includes indi-vidual testing...
31
™ LIQUIfit aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Range of Fittings, Tubings and Accessories for Water and Beverages COUV 15.indd 3 4/05/10 11:37:46
Transcript of LIQUIfit - docs.pneumatiek.nl · The Parker-Legris production process includes indi-vidual testing...
™LIQUIfit
aerospaceclimate controlelectromechanicalfiltrationfluid & gas handlinghydraulicspneumaticsprocess controlsealing & shielding
Range of Fittings, Tubings and Accessories for Water and Beverages
COUV 15.indd 3 4/05/10 11:37:46
™LIQUIfit
2
Compressed air pipe
systems,vacuum pipe
systems for automation
Water and beverage
dispensing
Pneumatic range:
Air and liquid pipe systems
in food process applications
Autoline:
Couplers for fuel
systems
Transair:
Air and water networks
for manufacturing
Transportation
Parker-Legris Industrial Applications
COUV 15.indd 4 4/05/10 11:37:54
4 - 7
8
9
10 - 15
16 - 22
24 - 25
23
26 - 27
28 - 29
30
™LIQUIfit
3
KTW and
W270
NSF 61In compliance with NSF/ANSI-61,
the fittings and tubing shown in this
catalogue are tested, certified and
approved for contact with drinking water
- C HOT
NSF 51In compliance with NSF/ANSI-51, the
fittings and tubing shown in this catalo-
gue are tested, certified and approved
for contact with food up to 95°C
FDAAll materials in contact with
food and drinking water are in com-
pliance with the American Food and
Drug Administration
In compliance with 1935/2004/EC, all
the materials in contact with fluids are
approved for contact with food and
drinking water
All the products shown in this catalogue
are RoHS certified
NSF 42 - NSF 58In compliance with NSF/ANSI- 42/58, the
tubing shown in this catalogue is tested,
certified and approved for contact with
drinking water up to 95°C
ACSIn compliance with the directive 2002/72/EC, the
fittings and tubing shown in this catalogue are
tested, certified and approved by ACS for contact
with drinking water
USDA NSF H1The grease used in the fittings of this
catalogue conforms to USDA NSF H1
recommendations
Advantages of the LIQUIfit™ Range
Technical Features
Fields of Application
Metric Fittings Range
Carstick Cartridges
Accessories
Non-Return Valves and Ball Valves
Complementary Products
Fractional Inch Fittings Range
Tubing
®
Regulations
Table of Contents
The tubing shown in this catalogue is tested, certified
and approved for contact with drinking water
For inch tubing
COUV 15.indd 5 4/05/10 11:38:03
™LIQUIfit
4
SpecificationsSuitable fluids: water, beverages, food, CO
2...
For use with chemicals or other potentially aggressive liquids,
contact the local Parker-Legris technical department (www.liquifit.net).
Working pressure 4,6,8 mm - 16 bar from -10° to 40°C
and temperature 5/32", 1/4", 5/16" : 10 bar at 65°C
4 bar at 95°C
10 mm - 3/8" : 13 bar from -10° to 40°C
7 bar at 65°C
4 bar at 95°C
12 mm - 1/2" : 11 bar from -10° to 40°C
7 bar at 65°C
4 bar at 95°C
Maximum circuit pressure also depends on the type of tube used.
Maximum torque values 1/8 and 1/4 : 1.5 Nm / 1.0 Ibf-ft
for plastic threads
BSPT / NPTF 3/8 and 1/2 : 3.0 Nm / 2.2 Ibf-ft
Introducing LIQUIfit™
From the Trusted Inventor of the Instant Fitting
With over 40 years of experience, Legris now presents
a range of leak-free, instant fittings in a bio-based compact body.
LIQUIfit™ offers:
Optimum performance suitable for contact with water, beverages and food
The most compact profile on the market
100% bio-based body and thread
EPDM patented sealing technology
Full flow
No pumping effect
No need for locking clip or tube insert
Minimized internal retention
Immediate sealing on threads
COUV 15.indd 6 4/05/10 11:38:07
™LIQUIfit
5
White Grey Available
upon request
2 colours for fittings
Comprehensive range of products
9 colours (clear, red, blue, black, green,
yellow, purple, orange, natural)
Inch sizes 5/32", 1/4", 5/16", 3/8", 1/2"
Metric sizes 4, 6, 8, 10, 12 mm
Ball valves - non-return valves (NRV)
Parker Legris "Advanced PE" tubing
Advantages of the LIQUIfit™ Range
Wide range of shapes
For tubes 4, 6, 8, 10, 12 mm
1/4", 5/32", 5/16", 3/8" and 1/2"
BSPT / NPT threads 1/8" to 1/2"
Innovative cartridge system
COUV 15.indd 7 4/05/10 11:38:15
™LIQUIfit
6
High performance materials
Suitable for: water, beverages, CO2...
High chemical resistance
(chlorine, cleaning agents, UV)...
Approved quality for contact with food
(FDA, NSF 61, 51, ACS)
Mechanical resistance over time
Optimal sealing
Quality control and date coding
Automatic sealing: the D seal within the
fitting provides a positive seal on the O.D.
of the tube, in both static and dynamic
positions, due to an optimized design of
the fitting cavity.
Renewable bio-based material
The LIQUIfit™ body is manufactured from a
unique bio-based high performance polymer
produced from renewable plants, to expand
the use of non-fossil-based resources.
CO2 emissions are divided by 5 compared
to classic polymer fittings.
All LIQUIfit™ threaded fittings have pre-applied PTFE
thread sealant to save time during assembly, but
may be ordered without thread pre-coating.
Part numbers : 63XX = with pre-coating
65XX = without pre-coating
PTFE immediate seal of threads
EPDM D seal
bio-basedmaterial
PTFE threadsealant
stainlesssteelgrippingring
retaining sleeve
releasebutton
Advantages of the LIQUIfit™ Range
The Parker-Legris production process includes indi-
vidual testing and unit quality control and dating for all
LIQUIfit™ instant fittings, in order to guarantee their
quality and traceability.
LIQUIfit™ white and grey fittings comply
with the following standards:
- C HOT - NSF 51 at 95°C
advanced patented sealing technology
COUV 15.indd 8 4/05/10 11:38:19
™LIQUIfit
7
Advanced design (patented)
The most compact profile on the market
Ergonomic and aesthetic design
Ergonomic release button
Easy-to-clean external shapes
Simply push the tubing
until it can go no further.
Gripping and sealing
are accomplished
instantaneously.
First depress the manual
release button, then pull the
tubing out of the fitting.
Innovative technology (patented)
Convenient compact full flow profile: as gripping
and sealing within the fitting is achieved using the
outside of the tube, there is no flow restriction.
The smallest orifice inside the fitting is equal to or
larger than the internal diameter of the tube.
Instant connection/disconnection
The much reduced movement of the LIQUIfit™
gripping system prevents any pumping effect
No tube insert or locking clip required at any
working temperature (with Parker-Legris
Advanced PE Tubing)
Advanced gripping design allows a tight bend
radius without leaks
Can be used with prepared metallic tubing
(please consult Parker-Legris’ technical
department for the groove dimensions)
LIQUIfit™ 1/4 fitting Standard 1/4 fitting
Advantages of the LIQUIfit™ Range
Internal hex to allow easy mounting in a restricted
amount of space
COUV 15.indd 9 4/05/10 11:38:23
™LIQUIfit
8
Achieve a square cut edge
with a tube cutter
Simply push the tubing until it can
go no further. Holding and sealing
is accomplished instantaneously
Pull on the tubing to verify
gripping action
Make sure there is no flow
Depress the manual push
button, then pull the tube out
Tighten by hand.
Make final
adjustment with
wrench at the hex
Achieve a square cut and clean
edge
Use Legris tube cutter.
(p/n 3000 71 00)
Allow adequate
bend radius
of tube
Avoid using wrench
on push-to-
connect end
Avoid drastic angle cutting which
can lead to an improper seal
Avoid using a knife or a blunt tool
to cut the tubing. Avoid burrs,
dirt, and anything that can
hinder full flow
Avoid kinking the tubing and side
load against the collet
or gripping ring which
can cause leaks
Avoid contaminating
substances in fittings
and cartridges
Technical Features
Maximum torque BSPT/NPTF Threads
Maximum
Torque
1/8 and 1/4 3/8 and 1/2
1.0ft lbf-ft 2.2ft lbf-ft
1.5 Nm 3.0 Nm
Recommendations
Instant FittingsQuick Assembly
Instant FittingsQuick List
Installation of Parker-Legris fittings
Connection Disconnection Do’s Don’ts
Pressure and temperature of the different diameters of the LIQUIfit™ range
Pressure (bar) Pressure (bar)
Pressure (bar) Pressure (bar)
Pressure (bar) Pressure (bar)
4
6
8
10
12
4
6
8
10
12
4
6
8
10
12
16
16
16
13
11
10
10
10
7
7
4
4
4
4
4
16
16
16
15
11
10
10
10
7
7
4
4
4
4
4
-
10
-
10
-
-
4
-
4
-
-
-
-
-
-
-
10
-
10
10
-
7
-
7
7
-
-
-
-
-
5/32
1/4
5/16
3/8
1/2
5/32
1/4
5/16
3/8
1/2
5/32
1/4
5/16
3/8
1/2
Fittings Fittings
Fittings
Fittings
Fittings
FittingsInch Ø Inch Ø
Inch Ø
Inch Ø
Inch Ø
Inch Ø
Metric Ø Metric Ø
Metric Ø
Metric Ø
Metric Ø
Metric Ø Tube Tube
Tube
Tube
Tube
Tube
NRV NRV
NRV
NRV
NRV
NRV
Ball
Valves
Ball
Valves
Ball
Valves
Ball
Valves
Ball
Valves
Ball
Valves
-10º C
1º C
20º C
4
6
8
10
12
16
16
16
13
11
16
16
16
15
11
-
-
-
-
-
-
-
-
-
-
5/32
1/4
5/16
3/8
1/2
4
6
8
10
12
16
16
16
13
11
16
16
16
15
11
-
10
-
10
-
-
10
-
10
10
5/32
1/4
5/16
3/8
1/2
4
6
8
10
12
16
16
16
13
11
16
16
16
15
11
-
10
-
10
-
-
10
-
10
10
5/32
1/4
5/16
3/8
1/2
40º C
65º C
95º C
COUV 15.indd 10 4/05/10 11:38:25
™LIQUIfit
9
Suitable for a wide variety of uses in POU* water purification systems
The LIQUIfit™ range provides compact connections in all applications
Other typical areas of application for LIQUIfit™
Industrial water
treatment systems
POE**: Water
softeners
Drink dispense networks
* Point of Use ** Point of Entry
Water coolers
and heaters
COUV 15.indd 11 4/05/10 11:38:31
™LIQUIfit
4
4
6
6
8
8
8
10
10
10
12
12
R1/8
R1/4
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R3/8
R1/2
F1 F2 HP3Option
BSPT
BSPT
6305
6305 04 10WP26305 04 13WP26305 06 10WP26305 06 13WP26305 08 10WP26305 08 13WP26305 08 17WP26305 10 13WP26305 10 17WP26305 10 21WP26305 12 17WP26305 12 21WP2
ØD
F1
F2
H
C
mm mmmm
10
10
10
10
10
10
10
10
10
10
5
5
100
100
100
100
100
100
100
100
100
100
50
50
11
14
11
14
17
17
17
17
19
22
19
22
3
3
4
4
6
6
6
7
7
7
9
9
0,003
0,004
0,003
0,004
0,004
0,004
0,005
0,005
0,007
0,01
0,008
0,012
18
18
18
18
20
20
20
21,5
21,5
21,5
24,5
24,5
P2ØD C
C
6379
ØD
ØG
H
LF
C
P2
10
10
10
10
10
10
11
11
11
14
14
14
19
19
19
8
12
12
0,002
0,003
0,004
P3Option
6379 06 10WP26379 06 13WP26379 06 17WP2
100
100
100
mm mm mm mm mm
6
6
6
R1/8
R1/4
R3/8
ØDF G H L L1
10
Met
ric
Fitt
ing
s R
ang
e
Male connector - BSPT thread
Fixed elbow - BSPT thread
QtyQty
QtyQty
COUV 15.indd 12 4/05/10 11:38:33
™LIQUIfit
P3Option
P3Option
P3Option
100
100
100
100
100
6
6
8
8
10
R1/8
R1/4
R1/4
R3/8
G1/2
E
E
F
F
H
H
6315
6353
6315 06 10WP26315 06 13WP26315 08 13WP26315 08 17WP2
6353 10 21WP2
P2
P2
F
H
E
ØD
C
F
H
E
ØD
C
mm
mm
mm
mm
mm
mm
10
10
10
10
10
11
14
14
14
13
16
16
20
32
33
33,5
36
0,003
0,004
0,005
0,006
12 27 36 0,007
ØD
ØD
6309
6309 06 10WP26309 06 13WP26309 06 17WP26309 08 10WP26309 08 13WP26309 08 17WP26309 10 13WP26309 10 17WP26309 10 21WP26309 12 17WP26309 12 21WP2
L
H
C
ØG
F
ØD6
6
6
8
8
8
10
10
10
12
12
R1/8
R1/4
R3/8
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R3/8
R1/2
ØD F G H L
10
10
10
10
10
10
10
10
10
4
4
100
100
100
100
100
100
100
100
100
40
40
13
14
17
19
19
19
19
19
22
22
22
10,5
10,5
10,5
13,5
13,5
13,5
16
16
16
19
19
28
28
28
34
34
34
38
38
38
44
44
24
24
24
29,5
29,5
29,5
34,5
34,5
34,5
40
40
0,006
0,007
0,008
0,01
0,011
0,011
0,019
0,02
0,023
0,022
0,024
P2mm mm mm mm
10
10
10
10
10
10
10
10
10
4
4
100
100
100
100
100
100
100
100
100
40
40
13
14
17
19
19
19
19
19
22
22
22
10,5
10,5
10,5
13,5
13,5
13,5
16
16
16
19
19
28
28
28
34
34
34
38
38
38
44
44
18
18
18
23
23
23
26,5
26,5
26,5
31
31
0,008
0,009
0,01
0,012
0,013
0,013
0,018
0,019
0,022
0,024
0,026
L/2 L/2
C
H
ØD
ØG
F
H
6308
6308 06 10WP26308 06 13WP26308 06 17WP26308 08 10WP26308 08 13WP26308 08 17WP26308 10 13WP26308 10 17WP26308 10 21WP26308 12 17WP26308 12 21WP2
ØD F G H L/2P2
P3Option
6
6
6
8
8
8
10
10
10
12
12
R1/8
R1/4
R3/8
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R3/8
R1/2
mm mm mm mm
11
BSPT
BSPT
BSPT
BSPP
C
C
C
C
Metric Fittings Range
Female connector - BSPT thread
Tap connector - BSPP thread flat type
Swivel elbow - BSPT thread
Swivel branch tee - BSPT thread
Qty
Qty
Qty
Qty
Qty
Qty
Qty
Qty
COUV 15.indd 13 4/05/10 11:38:35
™LIQUIfit
6302 04 00WP26302 06 00WP26302 08 00WP26302 10 00WP26302 12 00WP2
6302 04 06WP26302 06 08WP26302 08 10WP26302 10 12WP2
6302
ØG
ØD2
ØDØD1
L
6302
G
4
6
8
10
12
4
6
8
10
6
8
10
12
LP2
10
10
10
10
5
10
10
10
5
8,5
10,5
13,5
16
19
10,5
13,5
16
19
19,5
24
29,5
34,5
40,5
24
29,5
34,5
40,5
0,002
0,004
0,007
0,015
0,017
0,004
0,007
0,015
0,017
100
100
100
100
50
100
100
100
50
mm mmØD
ØD1 ØD2
10
10
10
10
10
10
10
10
10
4
4
10
10
10
10
10
10
10
10
10
5
5
100
100
100
100
100
100
100
100
100
40
40
100
100
100
100
100
100
100
100
100
50
50
13
14
17
19
19
19
19
19
22
22
22
19
19
19
23
23
23
25
25
25
28
28
0,002
0,003
0,004
0,003
0,004
0,004
0,004
0,005
0,008
0,005
0,007
13
14
17
19
19
19
19
19
22
22
22
10,5
10,5
10,5
13,5
13,5
13,5
16
16
16
19
19
40
40
40
50
50
50
56,5
56,5
56,5
65,5
65,5
22
22
22
27
27
27
30
30
30
34,5
34,5
18,5
18,5
18,5
23
23
23
26,5
26,5
26,5
31
31
0,008
0,009
0,01
0,012
0,013
0,013
0,018
0,019
0,022
0,024
0,026
C
H1
H
L
F
ØD
ØGH
6303
6303 06 10WP26303 06 13WP26303 06 17WP26303 08 10WP26303 08 13WP26303 08 17WP26303 10 13WP26303 10 17WP26303 10 21WP26303 12 17WP26303 12 21WP2
ØD G H H1 LFP2
6
6
6
8
8
8
10
10
10
12
12
R1/8
R1/4
R3/8
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R3/8
R1/2
mm mm mm mm mm
C
H
ØD
F
6321
6321 06 10WP26321 06 13WP26322 06 17WP26321 08 10WP26321 08 13WP26321 08 17WP26321 10 13WP26321 10 17WP26321 10 21WP26321 12 17WP26321 12 21WP2
F HP2mm mm
ØD
R1/8
R1/4
R3/8
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R3/8
R1/2
6
6
6
8
8
8
10
10
10
12
12
P3Option
P3Option
P3Option
12
BSPT
BSPT
C
C
Metric Fittings Range
How to build part numbers : example 6305 08 17WP2
product range63XX = with pre-coating
65XX = without pre-coating
product typeXX05 = Male connector
XX79 = Fixed elbow
tube o.d. 4 6 8 10 12
thread code10 : 1/8 BSPT13 : 1/4 BSPT17 : 3/8 BSPT21 : 1/2 BSPT
coloursW = WhiteG = Grey
packagingP2 = standard packaging P3 = bulk packaging
Union elbow
Swivel male run tee - BSPT thread
Stem adapter - BSPT thread
6305 08 17 W P2
Qty
Qty
Qty
Qty
Qty
Qty
COUV 15.indd 14 4/05/10 11:38:36
™LIQUIfit
10
10
10
10
5
10
10
10
10
10
10
5
100
100
100
100
50
100
100
100
100
100
100
50
8,5
10,5
13,5
16
19
8,5
13,5
13,5
16
16
19
19
8,5
10,5
13,5
16
19
10,5
13,5
13,5
16
16
19
19
26,5
30
37
42
50,5
29
37
37
42
42
50
50
0,002
0,004
0,007
0,009
0,015
0,004
0,01
0,012
0,018
0,02
0,031
0,022
6306 04 00WP26306 06 60WP26306 08 00WP26306 10 00WP26306 12 00WP2
6306 04 06WP26306 04 08WP26306 06 08WP26306 06 10WP26306 08 10WP26306 08 12WP26306 10 12WP2
6306
L
ØG ØG ØD2ØDØD1Ø
6306
4
6
8
10
12
4
4
6
6
8
8
10
6
8
8
10
10
12
12
P2 G1 G2 Lmmmmmm
ØD
ØD1 ØD2
4
6
8
10
12
6304
6304 04 00WP26304 06 00WP26304 08 00WP26304 10 00WP26304 12 00WP2ØG
ØD ØDØD1
ØD2
H
L/2 L/2
630
ØDH
63046304
P2
10
10
10
10
5
100
100
100
100
50
8,5
10,5
13,5
16
19
20
23
29
34,5
40
15,5
18
22,5
26,5
31
0,004
0,006
0,009
0,014
0,019
G H L/2mm mm mm
ØD
P3Option
P3Option
13
P3Option
ØD ØT
F
K
L1L2
ØD1ØD
6316 04 00WP26316 06 00WP26316 08 00WP26316 10 00WP26316 12 00WP2
P2 Kmax L1F L2 Tminmmmmmmmm mm
ØD ØD1
4
6
8
10
12
16
18
21,5
26
31
10
10
10
10
5
100
100
100
100
50
13
15
18
22
26
5,5
8,5
14,5
14,5
18,5
10,5
10
10,5
13
15,5
15,5
20
27
30
35
10,5
12,5
15,5
18,5
22,5
0,018
0,029
0,037
0,084
0,102
6316
Metric Fittings Range
All plastic nuts are fitted with an integrated O-ring to optimize sealing to a bulkhead wall.
Union connector
Union tee
Bulkhead union
Qty
Qty
Qty
Qty
QtyQty
COUV 15.indd 15 4/05/10 11:38:38
™LIQUIfit
14
P3Option
P3
P3
P3
P3
Option
Option
Option
Option
4
6
8
10
4
6
8
10
4
6
8
10
4
6
8
10
ØD1
ØD1
ØD2
ØD2
tube
tube
H 2
ØD1
ØD2
ØG
L/2 L/2
H1H
H2
ØD1
L
H1H
ØD2H2
ØG
ØD16388 04 00WP26388 06 00WP26388 08 00WP26388 10 00WP2
6383 04 00WP26383 06 00WP26383 08 00WP26383 10 00WP2
6388
10
10
10
10
10
10
10
10
100
100
100
100
100
100
100
100
8,5
10,5
13,5
16
8,5
10,5
13,5
16
25
28,5
33,5
41
33
38,5
49
57
6
7
8
9,5
6
7
8
10,5
15,5
17
21,5
24,5
15,5
17
21,5
25,5
15
16
23
26,5
15
18
23
26,5
0,005
0,006
0,008
0,012
0,005
0,006
0,008
0,012
P2
P2
H1
H1
H2
H2
L/2
L
H
H
G
G
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
ØD
4
6
8
10
12
ØD ØD
L
HN
K
6340 04 00WP26340 06 00WP26340 08 00WP26340 10 00WP26340 12 00WP2
6340 6340
P2
10
10
10
10
5
100
100
100
100
50
17,5
21,5
28
33
39
8,5
10,5
13,5
16
19
30
36,5
44,5
53
60,5
9
11
14,5
17
20
0,004
0,007
0,013
0,02
0,025
H K L Nmm mm mm mm
H
ØD
ØG
63516351
P2
10
10
10
10
10
100
100
100
100
100
8,5
10,5
13,5
16
19
15
17
21,5
22
27,5
0,001
0,002
0,003
0,003
0,006
G Hmm mm
ØD
4
6
8
10
12
6351 04 00WP26351 06 00WP26351 08 00WP26351 10 00WP26351 12 00WP2
6307 06 00WP26307 08 00WP2
6307 6307
10
10
11
13,5
36
45
20
22,5
4,2
4,2
0,01
0,02
100
100
P2 L T H Gmm mm mm mm
6
8
ØD
H L
ØGØT
ØDØD
ØD
ØD
6383
6388 Plug-in branch tee with plastic tailpiece
Metric Fittings Range
Two-way divider
Tube cap
Cross
Plug-in equal and unequal run tee with plastic tailpiece
stem
Qty
Qty
Qty
QtyQty
Qty
Qty
Qty
QtyQty
available upon request
available upon request
COUV 15.indd 16 4/05/10 11:38:40
™LIQUIfit
6322 06 04WP26322 08 06WP26322 10 07WP2
6322 6322
10
10
10
P2
100
100
100
39
43
50
25
25
29,5
17
17
22
0,004
0,005
0,006
L1 L2 Lmm mm mm
6
8
10
4
6
7
7
8,5
8
ØD1 ØD2 ØD3
6326 04 00WP26326 06 00WP26326 08 00WP26326 10 00WP26326 12 00WP2
6326 6326
10
10
10
10
5
100
100
100
100
50
6
8
10
12
14
30
33
35
42
45
15,5
16,5
17,5
21
22
0,001
0,001
0,002
0,003
0,004
P2 L1 L Gmm mm mm
ØD
4
6
8
10
12
4
4
6
6
8
8
10
10
12
6
8
8
10
10
12
12
14
14
L
L1
ØD2 ØD1ØG
6366 04 06WP26366 04 08WP26366 06 08WP26366 06 10WP26366 08 10WP26366 08 12WP26366 10 12WP26366 10 14WP26366 12 14WP2
63666366
10
10
10
10
10
10
10
10
5
100
100
100
100
100
100
100
100
50
8,5
8,5
10,5
10,5
13,5
13,5
16
16
19
38
38
38
39
48,5
48,5
52
53
55,5
23,5
19
20
17,5
28,5
24,5
33,5
33,5
33,5
0,004
0,004
0,004
0,006
0,009
0,01
0,019
0,02
0,023
P2 G L L1mm mm mm
H2
H1H
ØD2
ØD1
ØGL
6382
6382 04 00WP26382 06 00WP26382 08 00WP26382 10 00WP26382 12 00WP2
6382 04 06WP26382 06 04WP26382 06 08WP26382 08 10WP26382 10 12WP2
6382
10
10
10
10
5
10
10
10
10
10
100
100
100
100
50
100
100
100
100
100
8,5
10,5
13,5
16
19
10,5
10,5
13,5
16
19
23
26,5
33,5
39
44,5
26,5
25
33,5
39
44,5
6
7
8
9,5
10
7
7
8
9,5
10
15,5
17
21,5
24,5
27
17
15,5
21,5
24,5
27
15
17
22,5
26,5
31
16,5
17
22,5
26
30
0,003
0,003
0,004
0,009
0,012
0,003
0,004
0,004
0,009
0,012
P2 G H L H1 H2mm mm mm mm mm
4
6
8
10
12
4
6
6
8
10
4
6
8
10
12
6
4
8
10
12
L
L1
L2
ØD1 ØD3 ØD2
ØG
ØD L1
L
63
P3
P3
P3
P3
Option
Option
Option
Option
15
P3Option
ØD1 ØD2tube
10
10
10
10
5
100
100
100
100
50
8,5
11
13,5
16
19
33,5
39
44
53
58
19
21
21,5
27
27
21
25
25,5
32,5
34
13
14,5
19,5
23
26
0,005
0,005
0,006
0,009
0,012
4
6
8
10
12
4
6
8
10
12
6380 04 00WP26380 06 00WP26380 08 00WP26380 10 00WP26380 12 00WP2
P2 H1 H2 L H Gmm mm mm mm mm
H1
ØGH2
H
ØD1
ØD2
L
6380
Metric Fittings Range
ØD1 ØD2stemtube
ØD1 ØD2stemtube
Plug-in 45° elbow with plastic tailpiece
Tube-to-hose stem with plastic tailpiece
Plug with plastic tailpiece
Reducer with plastic tailpiece
Plug-in elbow with plastic tailpiece
stem
Qty
Qty
Qty
Qty Qty
Qty
Qty
Qty
QtyQty
available upon request
COUV 15.indd 17 4/05/10 11:38:42
™LIQUIfit
16
ØD
F1
F2
H
C
P3Option
6305 04 10WP26305 04 13WP26305 56 10WP26305 56 13WP26305 08 10WP26305 08 13WP26305 08 17WP26305 60 13WP26305 60 17WP26305 60 21WP26305 62 17WP26305 62 21WP2
mm
ØD C
C
F1 F2 HP2
5/32
5/32
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
1/2
1/2
R1/8
R1/4
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R1/4
R3/8
R3/8
R1/2
7/16
9/16
7/16
9/16
11/16
11/16
11/16
3/4
3/4
3/4
15/16
15/16
10
10
10
10
10
10
10
10
10
10
5
5
100
100
100
100
100
100
100
100
100
100
50
50
3/32
3/32
5/32
5/32
7/32
7/32
7/32
5/32
5/32
1/4
1/4
3/8
18
18
17
17
20
20
20
22,1
22,1
27,9
27,9
27,9
0,002
0,003
0,002
0,003
0,004
0,004
0,005
0,006
0,006
0,012
0,014
0,017
6305
ØD
ØG
H
LF
C
P3Option
63796379
ØD F G H LP2
10
10
10
10
10
100
100
100
100
100
6379 56 10WP26379 56 13WP26379 56 17WP26379 60 13WP26379 60 17WP2
11
11
11
16
16
22
26
26
31,5
32
18
18
18
26
26
0,003
0,003
0,003
0,006
0,006
1/4
1/4
1/4
3/8
3/8
R1/8
R1/4
R3/8
R1/4
R3/8
3/8
3/8
3/8
1/2
1/2
mm mm mm
BSPT
BSPT
Fixed elbow - BSPT thread
Male connector - BSPT thread
Frac
tiona
l Inc
h Fi
ttin
gs R
ange
Qty InchQty Inch
Qty InchQty
COUV 15.indd 18 4/05/10 11:38:45
ØD P3 E F H
3/8 G3/8
3/8 G1/2
ØD P3 E F H
1/4 1/4
3/8 3/8
ØD F1 F2 H
1/4 1/8
1/4 1/4
1/4 3/8
3/8 1/8
3/8 1/4
3/8 3/8
3/8 1/2
1/2 3/8
1/2 1/2
ØD P3 E F H
™LIQUIfit
17
ØD
ØG
H
LF
C
F
H
E
ØD
C
F
H
E
ØD
C
F
H
E
ØD
C
P3
P3
Option
Option
Option
Option
Option
Option
6305
6305 56 11WP26305 56 14WP26305 56 18WP26305 60 11WP26305 60 14WP26305 60 18WP26305 60 22WP26305 62 18WP26305 62 22WP2
ØD
F1
F2
H
C
mm
10
10
10
10
10
10
10
5
5
100
100
100
100
100
100
100
50
50
1/2
9/16
3/4
3/4
3/4
3/4
15/16
15/16
15/16
5/32
5/32
1/4
5/32
1/4
1/4
1/4
3/8
3/8
17
17
21,5
22,1
22,1
22,1
27
28
28
0,002
0,003
0,004
0,005
0,006
0,006
0,012
0,012
0,014
P2
6315
6352
6353
6315 56 14WP26315 60 18WP2
6352 60 17WP26352 60 21WP2
6353 60 21WP2
P2
P2
P2
mm
mm
mm
mm
mm
mm
10
10
10
10
100
100
10G1/23/8
100
100
100
12
12
12
12
12
11/16
13/16
22
27
27
30
36
36
36
36
0,004
0,009
0,009
0,01
0,01
6379
6379 56 11WP26379 56 14WP26379 56 18WP26379 60 14WP26379 60 18WP2
P2ØD P3 F G H L
1/4 1/8 3/8
1/4 1/4 3/8
1/4 3/8 3/8
3/8 1/4 1/2
3/8 3/8 1/2
10
10
10
10
10
100
100
100
100
100
11
11
11
16
16
22
26
26,5
32
32,0
18
18
18
26
26
0,003
0,003
0,003
0,006
0,006
mm mm mm
6325
FH
E
ØD
C
6325 56 133WP26325 60 133WP2
mm mmP2ØD
1/4
3/8
7/16-24
7/16-24
E
7
7
F
9/16
9/16
H
31
3210
10
100
100
0,002
0,004
NPTF
NPTF
BSPP
BSPP
NPTF
UNS
C
C
C
C
C
C
Fractional Inch Fittings Range Male connector - NPTF thread
Female connector - NPTF thread
Female connector - BSPP thread flat type
Tap connector - BSPP thread cone type
Fixed elbow - NPTF thread
Faucet connector - UNS
Qty
Qty
InchInchQty
Inch
Inch
Inch
Qty
Qty
Qty
Qty
Qty
Qty
QtyQty Inch
Qty inch
COUV 15.indd 19 4/05/10 11:38:47
™LIQUIfit
18
6309
6308
6303
6321
6309 56 10WP26309 56 13WP26309 56 17WP26309 08 10WP26309 08 13WP26309 08 17WP26309 60 13WP26309 60 17WP26309 62 17WP26309 62 21WP2
6308 56 10WP26308 56 13WP26308 56 17WP26308 08 10WP26308 08 13WP26308 08 17WP26308 60 13WP26308 60 17WP26308 62 17WP26308 62 21WP2
6303 56 10WP26303 56 13WP26303 56 17WP26303 08 10WP26303 08 13WP26303 08 17WP26303 60 13WP26303 60 17WP26303 62 17WP26303 62 21WP2
6321 56 10WP26321 56 13WP26321 56 17WP26321 08 10WP26321 08 13WP26321 08 17WP26321 60 13WP26321 60 17WP26321 62 17WP26321 62 21WP2
L
H
C
ØG
F
ØD
L/2 L/2
C
H
ØD
ØG
F
H
C
H1
H
L
F
ØD
ØGH
C
H
ØD
F
P3
P3
P3
P3
Option
Option
Option
Option
F
1/2
9/16
11/16
3/4
3/4
11/16
3/4
3/4
15/16
15/16
1/2
9/16
11/16
3/4
3/4
3/4
3/4
3/4
15/16
15/16
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
1/2
1/2
R1/8
R1/4
R3/8
R1/8
R1/4
R3/8
R1/4
R3/8
R3/8
R1/2
ØD F G H L
10
10
10
10
10
10
10
10
4
4
100
100
100
100
100
100
100
100
40
40
P2
11
11
11
13,5
13,5
13,5
16
16
22
22
28
28
28
34
34
34
38
38
50,5
50,5
23,6
23,6
23,6
29,5
29,5
29,5
34
34
46,5
46,5
0,003
0,004
0,006
0,244
0,270
0,285
0,010
0,011
0,024
0,027
ØD F G H L/2P2
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
1/2
1/2
R1/8
R1/4
R3/8
R1/8
R1/4
R3/8
R1/4
R3/8
R3/8
R1/2
1/2
9/16
11/16
3/4
3/4
3/4
3/4
3/4
15/16
15/16
ØD G H H1 LF
10
10
10
10
10
10
10
10
4
4
100
100
100
100
100
100
100
100
40
40
0,004
0,005
0,007
0,012
0,013
0,013
0,013
0,013
0,032
0,035
11
11
11
13,5
13,5
13,5
16
16
22
22
41,5
41,5
41,5
50
50
50
56
56
75
75
22,5
22,5
23
27
27
27
30
30
39,5
39,5
18
18
18
23
23
23
26
26
35,5
35,5
P2
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
1/2
1/2
R1/8
R1/4
R3/8
R1/8
R1/4
R3/8
R1/4
R3/8
R3/8
R1/2
10
10
10
10
10
10
10
10
4
4
100
100
100
100
100
100
100
100
40
40
11
11
11
13,5
13,5
13,5
16
16
22
22
28
28
29
34
34
34
38
38
50
50
18
18
18
23
23
23
26,0
26,0
35,5
35,5
0,004
0,005
0,007
0,012
0,013
0,013
0,013
0,013
0,032
0,035
1/2
9/16
11/16
3/4
3/4
3/4
3/4
3/4
15/16
15/16
ØD
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
1/2
1/2
R1/8
R1/4
R3/8
R1/8
R1/4
R3/8
R1/4
R3/8
R3/8
R1/2
H
19
19
19
23
23
19
25
25
31,5
31,5
10
10
10
10
10
10
10
10
5
5
100
100
100
100
100
100
100
100
50
50
0,001
0,002
0,004
0,003
0,004
0,004
0,004
0,004
0,006
0,009
P2mm
mm mm mm
mm mm mm
mm mm mm mm
BSPT
BSPT
BSPT
BSPT
C
C
C
C
Swivel elbow - BSPT thread
Swivel branch tee - BSPT thread
Swivel male run tee - BSPT thread
Stem adapter - BSPT thread
Fractional Inch Fittings Range
Qty
Qty
Qty
Qty
Qty
Qty
Qty
Qty Inch
Inch
Inch
Inch
COUV 15.indd 20 4/05/10 11:38:47
™LIQUIfit
19
6309
6309 56 11WP26309 56 14WP26309 56 18WP26309 60 14WP26309 60 18WP26309 62 18WP26309 62 22WP2
L
H
C
ØG
F
ØD
L/2 L/2
C
H
ØD
ØG
F
H
C
H1
H
L
F
ØD
ØGH
C
H
ØD
F
P3
P3
P3
P3
Option
Option
Option
Option
1/2
9/16
3/4
3/4
3/4
15/16
15/16
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/8
1/4
3/8
1/4
3/8
3/8
1/2
ØD F G H L
10
10
10
10
10
4
4
100
100
100
100
100
40
40
P2
11
11
11
16
16
22
22
28
28,0
28,5
38
38
50,5
51,5
23,6
23,6
23,6
34
34
46,5
46,5
0,003
0,004
0,006
0,010
0,011
0,024
0,027
mm mm mm
6308
6308 56 11WP26308 56 14WP26308 56 18WP26308 60 14WP26308 60 18WP26308 62 18WP26308 62 22WP2
ØD F G H LP2
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/8
1/4
3/8
1/4
3/8
3/8
1/2
1/2
9/16
3/4
3/4
3/4
15/16
15/16
10
10
10
10
10
4
4
100
100
100
100
100
40
40
11
11
11
16
16
22
22
28
28
29
38
38
50
51
18
18
18
26
26
35,5
35,5
0,004
0,005
0,007
0,013
0,013
0,032
0,035
mm mm mm
6303
6303 56 11WP26303 56 14WP26303 56 18WP26303 60 14WP26303 60 18WP26303 62 18WP26303 62 22WP2
ØD G H H1 LF
10
10
10
10
10
4
4
100
100
100
100
100
40
40
0,004
0,005
0,007
0,013
0,013
0,032
0,035
11
11
11
16
16
22
22
40,5
40,5
41,5
56
56
75
76
22,5
22,5
23
30
30
39,5
40,5
18,0
18,0
18,0
26
26
35,5
35,5
P2
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/8
1/4
3/8
1/4
3/8
3/8
1/2
1/2
9/16
3/4
3/4
3/4
15/16
15/16
mm mm mm mm
6321
6321 56 11WP26321 56 14WP26321 56 18WP26321 60 14WP26321 60 18WP26321 62 18WP26321 62 22WP2
F
1/2
1/2
3/4
3/4
3/4
15/16
15/16
ØD
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/8
1/4
3/8
1/4
3/8
3/8
1/2
H
19
19
19,5
25
25
31
32,5
10
10
10
10
10
5
5
100
100
100
100
100
50
50
0,001
0,002
0,004
0,004
0,004
0,006
0,009
P2mm
NPTF
NPTF
NPTF
NPTF
C
C
C
C
Swivel elbow - NPTF thread
Swivel branch tee - NPTF thread
Swivel male run tee - NPTF thread
Stem adapter - NPTF thread
Fractional Inch Fittings Range
Qty
Qty
Qty
Qty
Qty Inch
Qty Inch
Qty Inch
Qty Inch
COUV 15.indd 21 4/05/10 11:38:48
™LIQUIfit
20
6302 04 00WP26302 56 00WP26302 08 00WP26302 60 00WP26302 62 00WP2
6302 56 08WP26302 56 60WP26302 08 60WP26302 60 62WP2
63026302
ØG
ØD2
ØDØD1
L
ØG
ØD ØDØD1
ØD2
H
L/2 L/2
ØDH
P3
P3
P3
Option
Option
Option
G
8,5
11
13,5
16
22
13,5
16
16
22
ØD
5/32
1/4
5/16
3/8
1/2
1/4
1/4
5/16
3/8
5/16
3/8
3/8
1/2
L
19
24
29,5
34
46,5
29,5
33
34
46,5
0,002
0,007
0,007
0,006
0,018
0,007
0,006
0,007
0,018
P2
10
10
10
10
5
10
10
10
10
100
100
100
100
50
100
100
100
100
1/4
3/8
mm mm
6306 04 00WP26306 56 00WP26306 08 00WP26306 60 00WP26306 62 00WP2
6306 56 08WP26306 56 60WP26306 08 60WP26306 08 62WP26306 60 62WP2
6306 6306
L
ØG ØG ØD2ØDØD1Ø
10
10
10
10
5
10
10
10
10
5
100
100
100
100
50
100
100
100
100
50
8,5
11
13,5
16
22
13,5
16
16
22
22
26,5
30
37
42
57
37
41
42
55
56
0,002
0,001
0,007
0,005
0,016
0,007
0,007
0,007
0,016
0,020
ØD
5/32
1/4
5/16
3/8
1/2
1/4
1/4
5/16
5/16
3/8
P2 G L
5/16
3/8
3/8
1/2
1/2
mmmm
6304
6304 04 00WP26304 56 00WP26304 08 00WP26304 60 00WP26304 62 00WP2
6304 60 56WP26304 62 60WP2
63046304
P2
10
10
10
10
5
10
5
100
100
100
100
50
100
50
ØD
5/32
1/4
5/16
3/8
1/2
3/8
1/2
G H L/2
8,5
11
13,5
16
22
16
22
20
24
29
34
47
34
47
15,5
18
22,5
26
36
26
36
0,004
0,002
0,009
0,009
0,009
0,026
0,009
mm mm mm
6305 56 10 W P2
ØD2
ØD2
ØD2
ØD1
ØD1
ØD1
Fractional Inch Fittings Range
How to build part numbers : example 6305 56 10WP2
product range63XX = with pre-coating
65XX = without pre-coating
product typeXX05 = Male connector
XX79 = Fixed elbow
tube o.d.56 : 1/404 : 5/3208 : 5/1660 : 3/862 : 1/2
thread code10 : 1/8 BSPT13 : 1/4 BSPT17 : 3/8 BSPT21 : 1/2 BSPT
coloursW = WhiteG = Grey
packagingP2 = standard packaging P3 = bulk packaging
Union elbow
Union connector
Union Tee
Qty
Qty
Qty
Qty
Qty
Qty
COUV 15.indd 22 4/05/10 11:38:49
™LIQUIfit
21
P3
P3
P3
P3
Option
Option
Option
Option
6316 04 00WP26316 56 00WP26316 08 00WP26316 60 00WP26316 62 00WP2
63166316
ØD
5/32
1/4
5/16
3/8
1/2
P2
P2
P2
P2
10
10
10
10
5
10
10
10
10
5
10
10
10
10
5
10
10
10
10
100
100
100
100
50
100
100
100
100
50
150
150
150
150
50
100
100
100
100
Kmax L1F L2 Tmin
15,5
20
27
29,5
40,5
10,5
10
10,5
12,5
17
10,5
12,5
15,5
18,5
25,4
0,018
0,004
0,037
0,013
0,033
5,5
8,5
14,5
14,5
20,5
13
15
18
22
29
mmmmmmmm mm
6340 04 00WP26340 56 00WP26340 08 00WP26340 60 00WP26340 62 00WP2
6340 6340
ØD
5/32
1/4
5/16
3/8
1/2
H K L N
8,5
11
13,5
16
22
30
36
44,5
53
67
9
11,5
14,5
17
23
0,004
0,003
0,013
0,010
0,028
17,5
22
28
33
45
mm mm mm mm
6351
6351 04 00WP26351 56 00WP26351 08 00WP26351 60 00WP2
6351
ØD
5/32
1/4
5/16
3/8
G H
8,5
11
13,5
16
15
16
21,5
22,5
0,001
0,001
0,003
0,003
mm mm
ØD ØD
L
HN
K
H
ØD
ØG
ØD ØT
F
K
L1L2
6326
6326 04 00WP26326 56 00WP26326 08 00WP26326 60 00WP26326 62 00WP2
ØD
5/32
1/4
5/16
3/8
1/2
G L L1
0,001
0,001
0,002
0,002
0,004
6
8
10
11,6
14,7
30
36,5
35
42,5
48,5
15,5
22
17,5
22
21,5
mm mm mm
ØG
ØD L1
L6326
Fractional Inch Fittings Range
All plastic nuts are fitted with an integrated O-ring to optimize sealing to a bulkhead wall.
Bulkhead union
Two-way divider
Tube cap
Plug with plastic tailpiece
Qty
Qty
Qty
Qty
Qty
Qty
Qty
Qty
COUV 15.indd 23 4/05/10 11:38:50
™LIQUIfit
22
6322
6322 56 56WP26322 60 56WP26322 60 08WP26322 60 60WP26322 62 60WP2
P2
10
10
10
10
10
150
150
150
150
150
39,6
44,9
50
49,8
58,1
22,3
24,3
29,4
29,2
37,5
17
17
22
22
30
0,001
0,001
0,001
0,002
0,004
0,28
0,28
0,33
0,40
0,40
0,32
0,32
0,38
0,45
0,45
ØD1
1/4
3/8
3/8
3/8
1/2
L L1 L2ØD2 ØD3mm mm mm
P3
P3
P3
P3
P3
Option
Option
Option
Option
Option
63666366
10
10
10
10
5
100
100
100
100
50
1/4
1/4
5/16
5/16
3/8
P2 G
G
L
L
L1
L1
5/16
3/8
3/8
1/2
1/2
11
11
13,5
16
16
22,5
20,5
29
22
30
25,5
41
41
48,5
48,5
51
44
0,001
0,002
0,004
0,004
0,004
mm
mm
mm
mm
mm
mm
6382
6368
6382 04 00WP26382 56 00WP26382 08 00WP26382 60 00WP26382 62 00WP2
6382 56 60WP2
6368 60 08WP2
6382
6368
10
10
10
10
5
10
10
100
100
100
100
50
100
100
5/32
1/4
5/16
3/8
1/2
1/4
3/8
P2
P2
G H L
5/32
1/4
5/16
3/8
1/2
3/8
5/16
8,5
11
13,5
16
22
16
16
23
30,5
33,5
39
49
39
6
10,9
8
9
13
9
15,5
18
21,5
24,5
28,5
24,5
15
18
22,5
26,5
36
25,5
0,003
0,002
0,004
0,004
0,011
0,004
0,004
H1 H2mm mm mm mm mm
6388 56 00WP26388 08 00WP26388 60 00WP26388 62 00WP2
6388 6388
10
10
10
5
100
100
100
50
1/4
5/16
3/8
1/2
P2
1/4
5/16
3/8
1/2
H1
11
8
12
12,9
H2
20
21,5
25
29
L/2
18
23
25
32
H
30,5
33,5
42
51
G
11
13,5
16
22
0,002
0,008
0,008
0,020
mm mm mm mm mm
ØD1 ØD2tube
ØD1 ØD2tube
ØD1 ØD2tube
ØD1 ØD2tube
L
L1
ØD2 ØD1ØG
6366
H2
H1H
ØD2
ØD1
ØGL
H2
L
L1
L2
ØD1 ØD3 ØD2
H 2
ØD1
ØD2
ØG
L/2 L/2
H1H
H2
ØD1
6366 56 08WP26366 56 60WP26366 08 60WP26366 08 62WP26366 60 62WP2
L1
ØD1
L
ØD2 ØG
Fractional Inch Fittings Range
Tube-to-hose stem with plastic tailpiece
Reducer with plastic tailpiece
Plug-in elbow with plastic tailpiece
Increaser with plastic tailpiece
Plug-in branch tee with plastic tailpiece
stem
stem
stem
stem
inchinch Qty
Qty
Qty
Qty
Qty
Qty
Qty
Qty
Qty
Qty
COUV 15.indd 24 4/05/10 11:38:51
™LIQUIfit
>
H
K
ØD
3130 56 02
3130 08 02
3130 60 02
3130 62 02
3130 56 03
3130 08 03
3130 60 03
3130 62 03
3130 56 04
3130 08 04
3130 60 04
3130 62 04
3130 56 05
3130 08 05
3130 60 05
3130 62 05
3130 56 10
3130 08 10
3130 60 10
3130 62 10
3130 56 01
3130 08 01
3130 60 01
3130 62 01
ØD
1/4
5/16
3/8
1/2
8,05
9,50
10,80
14,05
3,25
4,35
4,25
5,75
1,166
0,260
0,343
0,912
31303130
3130 06 02
3130 08 02
3130 10 02
3130 12 02
3130 06 03
3130 08 03
3130 10 03
3130 12 03
3130 06 04
3130 08 04
3130 10 04
3130 12 04
3130 06 05
3130 08 05
3130 10 05
3130 12 05
3130 06 10
3130 08 10
3130 10 10
3130 12 10
3130 06 01
3130 08 01
3130 10 01
3130 12 01
ØD
6
8
10
12
7,85
9,50
10,80
12,50
3,15
4,35
4,25
5,10
0,142
0,260
0,343
0,486
31303130
ØD
3110
3110 04 003110 06 003110 08 003110 10 00 3110 12 00
3110 04 023110 06 023110 08 023110 10 02 3110 12 02
3110 04 033110 06 033110 08 033110 10 03 3110 12 03
3110 04 043110 06 043110 08 043110 10 04 3110 12 04
3110 04 053110 06 053110 08 053110 10 05 3110 12 05
0,001
0,001
0,001
0,001
0,001
100
100
100
100
100
100
100
100
100
100
100
100
100
4
6
8
10
12
3110
3110 04 003110 56 003110 08 003110 60 003110 62 00
3110 04 023110 56 023110 08 023110 60 023110 62 02
3110 04 033110 56 033110 08 033110 60 033110 62 03
3110 04 043110 56 043110 08 043110 60 043110 62 04
3110 04 053110 56 053110 08 053110 60 053110 62 05
0,001
0,001
0,001
0,001
0,001
100
100
100
100
100
ØD
5/32
1/4
5/16
3/8
1/2
23
H
H
K
K
mm
mm
mm
mm
Accessories
not compatible with non-return valves and ball valves
not compatible with non-return valves and ball valves
Assembly of the Tamper-Evident Safety Clip
Assemble the clipConnect the tube
Cut the clip with pliersRemove the clipRelease the tube
Evidence of tampering
Tamper-Evident Safety Clip for Inch Tubes
Tamper-Evident Safety Clip for Metric Tubes
Caps for colour-coding circuits for Metric tubes
Caps for colour-coding circuits for Inch tubes
Secure your connections
Qty
Qty
Qty
Qty
COUV 15.indd 25 4/05/10 11:39:21
™LIQUIfit
(F)
- C HOT - NSF 51
24
Working specifications
release button
retaining sleeve
(nickel-plated brass)
gripping ring
(stainless steel)
protection sleeve
(highly resistant polymer)
seal (EPDM)
USDA NSF H1 grease
suitable fluids
working
pressureworking
temperature
water, beverages,
food, CO2...
from 1bar to
16 bar maximum
-10°C to +95°C
Specifications
Cartridge is designed for use with
Advanced PE tubing.
Force required for insertion
Consult Parker-Legris technical department for other materials
Maximum Insertion Force
Cavity Material:
Nylon - PP - PE -Aluminum - Brass
Automatic assembly process
Carstick Cartridges
5/32 1/4 5/16 3/8 1/2
300 daN 300 daN 400 daN
All the materials in contact with the fluid comply with the following certifications:
4 6 8 10 12
®
Ø mm
Ø inch
F
Advantages
Saves time on assembly in completely safe conditions- one piece cartridge, no risk of losing the seal
- self-centering of the cartridge to half of its height
within the cavity
- protection against contaminants throughout
manufacture and assembly
Tried-and-tested technology- high technical performance
- automatic seal, full flow, vacuum capability
Suitable for automated processing(up to 3000 pcs/hour, according to the assembly rate)
- automatic self-alignment during insertion
- capable of combining dispensing and assembly
Tighter mounting tolerances and shallow cavities
COUV 15.indd 26 4/05/10 11:39:27
™LIQUIfit
ØD1
M
L
6300
6300
G
G
L
L
ØD1 M L
1/46
5/32 8,25 101,54
5/16 12,15 15,528
3/810
1/212
2
2
14,8 19
10.6 12
17,5 2,5 22
mmmm mm
ØD
L
H
6300 06 00
6300 56 00
6300 08 00
6300 08 00
6300 04 00
6300 04 00
6300 10 00
6300 60 00
6300 12 00
6300 62 00
ØD
ØD
ØLmm
ØLmm
Hmm
Hmm
1/4
6
5/32
4 8
8
9,9
9,9
0,002
0,002
0,002
0,002
0,005
0,005
5/16
8 13
13
14,7
14,7
0,003
0,003
0,01
0,01
3/8
10
1/2
12
9,9
10,4
15,5
15,5
19
21,6
11,5
12,2
16,8
16,5
19,4
22,8
L
øD
øG
25
6300
6300
10,314,515,2519,521,3
10,314,515,251921,3
554 629 794 9301038
554 600 794 9301038
50 50 50 50 50
50 50 50 50 50
4 6 8 10 12
5/32 1/45/16 3/8 1/2
ØD
ØD
Carstick® : Assembly
Self-centring up to half of the height of the cartridge
Cartridge in place Tube connected
Depression of seal protection leavesseal locked into cavity
Assembly tool
Please contact us for detailed drawings
of cavity dimensions and tolerances.
Carstick®
Carstick®
Cavity dimensions
Cartridge
Metric
Inch
inchmm
Metric
Inch
Qty
Qty
COUV 15.indd 27 4/05/10 11:39:29
ØD
G2
G1ØD
79927992
™LIQUIfit
- D HOT -
26
ØD P3 G1 G2 L
1/4
3/8
5
5
50
50
16,7
19,8
15,2
17,8
40,6
52,8
0,009
0,007
P2 mm mm mm
7992 56 00WP27992 60 00WP2
Suitable fluids
Working pressure
Working
Temperature
water, beverages
N.R.V. valves
ball valves
Single non-return valve
Acetal Non-Return Valves and Ball Valves
Can be used with a variety of chemicals and gases
Body Color: White (Acetal)
Seals: Food-grade Nitrile
Features of non-return valves and ball valves
Working pressure and temperature
Refer to chemical compatibility chart on page 28
Option
10 bar
1°C
10 bar
10 bar
10 bar
4 bar
7 bar
65ºC20°C
QtyQty
COUV 15.indd 28 4/05/10 11:39:36
4020
4021
4022
4023
H
ØDLH1
M
ØD
H
L
M
ØDC
F
H
H1
M
ØD
L
F
C
H
LH1M
ØD
L1F
C
ØD
Ø
4020
4021
4022
4023
™LIQUIfit
27
ØD P3 H H1 L M
mm
mm mm
Option
P2
48,5
59,1
0,014
0,027
0,016
0,028
0,015
0,022
0.032
47,7
58,1
10,4
10,4
38,6
46,7
ØD P3 L M
1/4 1/4
3/8 3/8
5 50
50 5
50
50 5
5
38,6
46,7
8,6
10,457,1
62,4
57,9
63,2
F H H1
17,0
19,0
Option
P2
1/4
3/8
ØD H H1 L L1 M
1/4 1/4
3/8 3/8
5
5
50
50
50,8
59,1
20,8
22,8
23,8
29,2
48,5
59,0
F
19,0
22,8
35,8
41,9
Option
Option
P2 P3
ØD
3/8
F
26,9
H
24,8
L
62,5
P3
5 50
1/2
M
58,4
P2
mm mm mm mm
mm mm
mm mm mm mm mm mm
mm mm mm mm
4023 60 22WP2
4020 56 00WP24020 60 00WP2
4021 56 14WP24021 60 18WP2
4022 56 14WP24022 60 18WP2
NPTF
NPTF
NPTF
C
C
C
In-line ball valve - tube-to-tube
In-line ball valve - tube-to-male NPTF
Tank ball valve - tube-to-female NPTF
In-line ball valve - tube-to-female NPTF
Ball Valves
QtyQty
QtyQty
QtyQty
Qty Qty
COUV 15.indd 29 4/05/10 11:39:46
™LIQUIfit
28
NSF 51NSF 61
- C HOT -
DI 2002/72/CE DI 2002/95/CE NSF 42/58
4
6
8
10
12
0.75
1.00
1,125
1.50
1.50
±0.10
±0.10
±0.10
±0.10
±0.10
±0.2
±0.2
±0.25
±0.25
±0.3
16
20
30
30
55
16
16
13
13
11
12
12
12
12
9
10
10
7
7
7
4
4
4
4
4
3
3
3
3
3
±0.10
±0.10
±0.10
±0.10
±0.10
1/4
3/8
1/2
0,040
0,062
0,062
±0,008
±0,009
±0,01
1"
1,25"
2,5"
16
13
11
12
12
9
10
7
7
4
4
4
3
3
3
± 0.004
± 0.004
± 0.004
± 0.004
± 0.004
± 0.004
Advantages
Metric Specifications
Inch Specifications
Made from high-grade polyethylene,
"Advanced PE" tubing ensures the best balance
between flexibility and pressure/temperature
resistance
Resistant to a wide range of aggressive chemical agents
Complies with international regulations and certifications
for food and drinking water
Available in nine colours and three diameters
Tested according to the W270 regulation regarding
micro-organism growth on materials used
in the drinking water industry
All colours are UV-stabilized, making it resistant
to direct ultraviolet sunlight and ideal for
outdoor applications
Silicone-free
Advanced Polyethylene Tubing
* NSF 42/58: 1/4" AND 3/8" approved for 10 bar and 1/2" approved for 8 bar at ambient temperature.
The Advanced PE Tubing is in compliance with :
This tubing is Tested and
Certified by NSF International against NSF/ANSI Standard
42/58 for materials and structural integrity requirements*
OD (inch) Wall Thickness (inch) Max. Working Pressure (bar)Max.
Ovality
(inch)
Min. Bend
Radius@
+ 20°C (inch)
Safety
FactorToleranceeToleranceD -15°C to +20°C +40°C +65°C +95°C
OD (mm) Max. Working Pressure (bar)Max.
Ovality
(mm)
Min. Bend
Radius@
+ 20°C (mm)
Safety
FactorToleranceeToleranceD -15°C to +20°C +40°C +65°C +95°C
Wall Thickness (mm)
for inch tubing
Use Parker-Legris "Advanced PE" tubing with
LIQUIfit™instant fittings to ensure perfect sealing.
KTW and
W270
COUV 15.indd 30 4/05/10 11:39:54
3000 71 003000 71 003000 71 00
H
L
H
N
KØD
Ø 8-10-12mm
K
Ø 4-6mm
H
N
KØD
Ø 3/8 - 1/2
K
Ø 1/4
™LIQUIfit
1099Y56F00
1098Y56F00
1098Y60F00
1096Y62F00
1015Y04F00
1030Y04F00
1015Y06F00
1030Y06F00
1015Y08F00
1015Y10F00
1075Y12F00
1099Y56F01
1098Y56F01
1098Y60F01
1096Y62F01
1015Y04F01
1030Y04F01
1015Y06F01
1030Y06F01
1015Y08F01
1015Y10F01
1075Y12F01
1099Y56F02
1098Y56F02
1098Y60F02
1096Y62F02
1015Y04F02
1030Y04F02
1015Y06F02
1030Y06F02
1015Y08F02
1015Y10F02
1075Y12F02
1099Y56F03
1098Y56F03
1098Y60F03
1096Y62F03
1015Y04F03
1030Y04F03
1015Y06F03
1030Y06F03
1015Y08F03
1015Y10F03
1075Y12F03
1099Y56F04
1098Y56F04
1098Y60F04
1096Y62F04
1015Y04F04
1030Y04F04
1015Y06F04
1030Y06F04
1015Y08F04
1015Y10F04
1075Y12F04
1099Y56F05
1098Y56F05
1098Y60F05
1096Y62F05
1015Y04F05
1030Y04F05
1015Y06F05
1030Y06F05
1015Y08F05
1015Y10F05
1075Y12F05
1099Y56F07
1098Y56F07
1098Y60F07
1096Y62F07
1015Y04F07
1030Y04F07
1015Y06F07
1030Y06F07
1015Y08F07
1015Y10F07
1075Y12F07
1099Y56F09
1098Y56F09
1098Y60F09
1096Y62F09
1015Y04F09
1030Y04F09
1015Y06F09
1030Y06F09
1015Y08F09
1015Y10F09
1075Y12F09
1099Y56F10
1098Y56F10
1098Y60F10
1096Y62F10
1015Y04F10
1030Y04F10
1015Y06F10
1030Y06F10
1015Y08F10
1015Y10F10
1075Y12F10
1000 ft
500 ft
500 ft
250 ft
150 m
300 m
150 m
300 m
150 m
150 m
75 m
1/4"
1/4"
3/8"
1/2"
4 mm
4 mm
6 mm
6 mm
8 mm
10 mm
12 mm
0,170"
0,170"
0,250"
0,375"
2,5 mm
2,5 mm
4 mm
4 mm
5,7 mm
7 mm
9 mm
5,500
3,300
6,300
5,900
1,76
2,86
2,58
4,80
4,05
6,20
5,55
,,
29
O.D.I.D.
Advanced Polyethylene Tubing: Colours/Diameters/Lengths
ØD
ØD
6
4
H
inch
H
mm
K
inch
K
mm
N
inch
N
mm
Nb of clips
per strip
Nb of clips
per strip
10,5
9
10
8
12
14
12,5
16,5
12
10,5
13
13,5
14
10,5
10,5
15
12
16,5
8
8
6
7
5
0,009
0,008
0,009
0,010
0,010
Accessories
Clip strips for tubing and fittings Inch
Clip strips for tubing and fittings Metric
Tube cutter
mm mm
25 79 0,029
This tool will cut all resilient plastic tubes from 1/8" to 1/2" diameter. It is designed to give a
clean cut at right angles to the tube axis. A spring maintains the cutter in the closed position.
Length
Material Food
Colour
Tube Codes
Part numbers have been chosen using a mnemonic method. Each tube is identified by:
Length
Product material
O.D.
Food regulation approval
Color
Code = length
96 = 250 feet = 76,2 m
98 = 500 feet = 152,4 m
99 = 1000 feet = 304,8 m
15 = 150 m
30 = 300 m
75 = 75 m
Material :
Y = polyethylene
Code = O.D.
56 = 1/4"
60 = 3/8"
62 = 1/2"
04 = 4 mm
06 = 6 mm
08 = 8 mm
10 = 10 mm
12 = 12 mm
H L
* Black tubing is UV-resistant ** Only available on drum
O.D.
tube
Length I.D.
tubeclear white
Tubing Metric
Tubing Inch
O.D. = outer diameter
I.D. = inner diameter
e = wall thickness
Clip
CLIP 06 00
CLIP 04 00
CLIP 10 00
CLIP 08 00
CLIP 12 00
CLIP 06 00
CLIP 10 00
CLIP 12 00
1/4 0,41
3/8
1/2
0,55
0,65
0,47
0,51
0,55
0,41
0,59
0,65
8
6
5
0,009
0,009
0,010
3000 71 00
1099 Y 56 F 03
O.D.
** *
COUV 15.indd 31 4/05/10 11:39:57
™LIQUIfit
30
excellent resistance to abrasion and corrosion due to high phosphorus chemical
nickel-plating of individual brass components
working temperature from -20° to +150°C
full flow fluid passage
automatic sealing of BSPT / BSPP versions via an integrated FKM seal in the sub-base
materials for body, ring, gripping collet and sub-base : high phosphorus FDA chemical
nickel-plated brass; seals : FKM fluoroelastomer authorized by FDA standards
pressure: 90% vacuum to 30 bar
resistance to aggressive environments and fluids thanks to 100% stainless steel: 316L stainless
steel body, 316L stainless steel washer, 303L stainless steel collet (LF 3800) / 316L stainless
steel collet (LF 3900) and FKM ‘O’ ring seal
full bore with no pressure drop
working temperature from -20° to +120°C depending on the type and size of the tubing
working pressure : maximum 30 bar depending on tubing used
working temperature : -20° to +150°C
pressure up to maxi 140 bar
fixing holes for mounting assembly
variety of mounting options
wide range of handle options
low to medium pressure
working pressure : 60 bar maximum
working temperature : -20° to +180°C
a large range of plugs
designed to enable rapid connections of threaded ports to tubing or hose in
corrosive environments
When a small bend radius is required for your application, polyurethane crystal tubing is the answer. This tubing resists abrasion and is made of
polyether (resistant to humidity and suitable for food contact).
FDA-approved FEP fluoropolymer tube provides excellent resistance to
aggressive washdown environments and high temperatures, up to 150°C
Food-quality braided PVC hose is translucent to enable visual confirmation
of fluid flow
Complementary Products
LF 3600, nickel-plated brass, for liquids and gases
LF 3900 / LF 3800, stainless steel for aggressive fluids
Stainless steel accessories
Stainless steel ball valves
Polyurethane, fluoropolymer tubing and braided PVC hose (FDA-approved)
Polyamide tubing
Polyamide Tubing provides good chemical resistance and is recommended
for applications which may require higher pressure
COUV 15.indd 32 4/05/10 11:39:59
™LIQUIfit
31
whether developed from standard products
or developed hand-in-hand with our customers
competitive pricing
technical excellence
compact size, etc.
Opening indicator
Hole to hang the bag up
Zipper to close tightly
Labels with product data
Product vizualisation
On the back: technical information and instructions for use
Standard Premium Packaging
Special Product Capability
The FSCE packaging proposal for the tubing is "three-in-one"
Compact
Protection against dust thanks to the plastic film and the end cap
Easy to stock and easily identifiable.
Legris has substantial experience in the design and manufacturing
of special fittings and assemblies for fluid control :
Our aim is to design, develop and put into series production products or
assemblies that are profitable for our customers thanks to :
COUV 15.indd 33 4/05/10 11:40:01
Subject to Change
