liqui cel product overview
-
Upload
bzmiller -
Category
Technology
-
view
1.422 -
download
5
description
Transcript of liqui cel product overview
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Membrane Contactor Technology& Auxiliary Equipment for Gas Transfer& Auxiliary Equipment for Gas Transfer A
LL R
IGH
TS
R
ES
ER
VE
D
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Company OverviewCompany Overview A Look Inside of our Membrane Contactors How do the Contactors Work Product Summary System Design & Performance Applications
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Company Information
ENERGY STORAGEIon Exchange Membranes
TRANSPORTATION& INDUSTRIAL
Lead acid batteryseparators
Polypore separator
ELECTRONICS
Rechargeable andDisposable lithium battery separators
SEPARATIONS MEDIAHigh Performance Filtration
HEALTHCARE
- Hemodialysis- Plasmapheresis- Blood oxygenation
MEMBRANAFILTRATION
- Degasification- Gasification- Debubbling- Liquid filtration
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Global Network
Membrana Manufacturing in North Carolina USA and Wuppertal Germany
Additional Sales and Technical Service Offices covering the globe
Manufacturing facility Sales office Operating headquarters
Charlotte, NC
Wuppertal, Germany
Tokyo, JapanShanghai, China
Italy
SingaporeMalaysia
Korea
Taiwan
France
Philippines
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Company Overview
A Look Inside of our Membrane ContactorsA Look Inside of our Membrane Contactors How do the Contactors Work Product Summary System Design & Performance Applications
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
SEM of Celgard® Microporous Polypropylene Hollow Fiber Membrane
0.03 µm Average Pore
200-220 µm
300 µm
Fiber Types:
All variants are nonselective but each has attributes that make it more suited for certain applications
- X40: O2 Removal
- X50: CO2 Removal
- Polyolefin: Low Surface Tension Fluids
Outer wall Membrane Wall Inside of Fiber
Polyolefin, Magnification 2000X
X40, X50
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
300 µm
Celgard® Microporous Hollow Fiber Array
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
0.75 x 1 MicroModule® Membrane Contactor
Liquid InletLiquid Outlet
Vacuum Capacity: 15-100 ml/min
This device available with polypropylene membrane
Housing available in clear polycarbonate
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
0.5 x 1 MicroModule® Membrane Contactor
Vacuum
Liquid Inlet
Liquid Outlet
Vacuum/Strip Gas
Capacity: 5 to 30 ml/min
This device available with polypropylene and polyolefin membrane
Housing available in clear polycarbonate and black HDPE (high density polyethylene)
The module can also be rotated so that the liquid flows in through the bottom and out through the top
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
MiniModule® Membrane Contactor
Capacity: Three size variants to process up to 3000 ml/min
This device available with polypropylene membrane, polycarbonate housing
The Liquid flows on the inside (lumenside) of the hollow fibers in this design
Vacuum Vacuum
LiquidStream
LiquidStream
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Liquid In
Liquid Out
Vacuum
The 1 x 3 SuperPhobic® Membrane Contactor
Capacity: 15-60 ml/min
All Polyolefin device that is resistant to many ink chemistries
Black polyethylene housing and polyethylene potting are favorable for UV inks
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Liquid Out
Vacuum
Liquid In
The 2 x 6 Radial Flow SuperPhobic® Membrane Contactor
Capacity: 100-1000 ml/min
The end of the contactor serves as a baffle and forces liquid flow outward over the hollow fibers to maximize surface area in a small device
Black polyethylene housing and polyethylene potting are favorable for UV inks
FDA Compliant
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Extra-Flow Membrane Contactor
Various product sizes process capacities of 0.5-400 gpm (0.1-90.8 m3/hr)
Patented Design with central baffle
Polypropylene, Polyethylene, PVDF and SS housing options (vary by product size)
FDA Compliant With Appropriate O-Rings
Some variants are also NSF Certified
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Company Overview A Look Inside of our Membrane Contactors
How do the Contactors WorkHow do the Contactors Work Product Summary System Design & Performance Applications
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Principles of Gas Transfer
Gasses in the atmosphere dissolve into water until equilibrium is reached
Equilibrium between the liquid and gas phase is offset when a vacuum and/or source of strip gas is applied
This creates a driving force to move gasses from the liquid phase into the gas phase
Liquid/Gas contact area at the pore
Liquid/Gas contact area at the pore
LIQ
UID
LIQ
UID
Vacuum and/or Sweep
Gas
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Gas in contact with water will tend to dissolve into water
The total amount of gas that will dissolve into water is proportional to the gas pressure
Henry’s law (P=Hx)
P = partial pressure of the gas in contact with the water
H = Henry’s proportionality constant of the gas
x = concentration of dissolved gas in water
Dissolved Gasses/Henry’s Law
Dissolved oxygen in water = 8.5 ppmDissolved nitrogen in water = 14.1 ppm
Air at 760 mm Hg
Dissolved oxygen in water = 8.5 ppmDissolved nitrogen in water = 14.1 ppm
Air at 760 mm Hg
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Operating Modes
By changing the partial pressure of the gas we can either remove gas from or dissolve gas into water.
Lower the partial pressure, the gas will be removed from the water Increase the partial pressure, the gas will dissolve into the water
To Vacuum
WaterOutlet
WaterInlet
Strip Gas
WaterOutlet
WaterInlet
Strip Gas
WaterOutlet
WaterInlet
ToVacuumPump
Sweep Gas Mode Vacuum Mode Combo Mode
Vent
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Company Overview A Look Inside of our Membrane Contactors How do the Contactors Work
Product SummaryProduct Summary System Design & Performance Applications
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Available Membrane Contactor Products Summary
Applications: Gas Transfer (O2,CO2,N2,VOC removal, & O2,CO2,N2, H2 absorption)
5 – 30 ml/min 15 – 100 ml/min
MicroModule® 0.5 x 1, MicroModule® 0.75 x 1
Up to 2000 ml/min Up to 3000 ml/min
MiniModule® 1.7 x 5.5MiniModule® 1.7 x 8.75
Up to 500 ml/minMiniModule® 1 x 5.5
Flow Range (one device)Product
Applications: Debubbling
* X50 in our high-purity 10-inch contactor is currently rated to 210 gpm in one device
5 – 30 gpm (1.1 – 6.8 m3/hr)Liqui-Cel® Extra-Flow 4 x 28
44 – 250 gpm* (10 – 57 m3/hr)44 – 210 gpm (10 – 48 m3/hr)
70 – 400 gpm (16-90.8 m3/hr)
Liqui-Cel® Extra-Flow 10 x 28Also in INDUSTRIAL version
Liqui-Cel® Extra-Flow 14 x 28
5 – 50 gpm (1.1 – 11.4 m3/hr)Liqui-Cel® Extra-flow 6 x 28
3 – 15 gpm (0.7 – 3.4 m3/hr)Liqui-Cel® Extra-Flow 4 x 13
0.5 – 3 gpm (0.1 – 0.7 m3/hr)Liqui-Cel® Extra-Flow 2.5 x 8
Flow Range (one device)Product
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
SuperPhobic® Products
5 – 30 ml/min
15 – 60 ml/min
MicroModule® 0.5 x 1*
SuperPhobic® 1 x 3 Radial Flow
5 – 30 gpm (1.1 – 6.8 m3/hr)SuperPhobic® Extra-Flow 4 x 28*
3 – 15 gpm (0.7 – 3.4 m3/hr)SuperPhobic® Extra-Flow 4 x 13*
0.03 – 0.26 gpm (100 ml/min– 1 liter/min)
0.25 – 3 gpm (0.06 – 0.7 m3/hr)
SuperPhobic® Radial Flow 2 x 6*
SuperPhobic® Extra-Flow 2.5 x 8*
Flow Range (one device)Product
* FDA compliant products
2 x 6 Radial Flow 2.5 x 8 Extra-Flow 4 x 13 and 4 x 28 Extra-Flow
0.5 x 1 MicroModule®
1 x 3 Radial Flow
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Auxiliary Products Available
Liquid Ring Vacuum Pumps – From 4 to 110 ACFM @ 50 torr*
Oxygen Analyzers – Models available with measurement ranges
from 0.1 ppb to 20 ppm
– Ideally suited for oxygen measurement in many high purity and industrial applications
*larger sizes available
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Small size — 10x the surface area of conventional degasifiers
Modular like other water treatment components
Total gas control
Cleanliness
High inlet pressures
Performance can be accurately modeled
Does not require chemicals to operate
– Compact skids can fit inside of existing buildings
– Lower installation costs
– Can be easily expanded
– Allows for redundancy with multiple contactors
– O2, CO2, and N2 control with one device
– Quick to rinse
– Can eliminate or reduce the number of
transfer pumps required
– Quick sizing estimates
– Guaranteed outlet of <1 ppb for O2,
<1 ppm for CO2
– Environmentally friendly and safe for employees
FEATURES BENEFITS
Why Membrana Membrane Contactors?
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Company Overview A Look Inside of our Membrane Contactors How do the Contactors Work Product Summary
System Design & PerformanceSystem Design & Performance Applications
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
LiquidOutlet
Liquid Inlet
System Design Considerations
Liquid Inlet
Parallel Configuration for Flow
Liquid Outlet
Series Configuration for Efficiency
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Typical Combo Mode P&ID for Extra-Flow Contactors
PI
FI
VENT/DRAIN
VENT
DRAIN
SAMPLE
PI
FI
CHECKVALVE
PI
Liq
ui-
Liq
ui-
Ce
lC
el®®
FEED WATER
PRODUCT WATERN2 FEED
VAC EXHAUST
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
O2 Removal Performance of Two Membrane Contactors in Series with X40 Fiber
Oxy
gen
Rem
ova
l (%
)
Performance changes with flow rate
See the back of our product data sheets for performance information on other contactor sizes
10 x 284 x 28
Water Flow Rate (m3/hr)
Water Flow Rate (gal/min)
40%
50%
60%
70%
80%
90%
100%
50 100 150 200 25040%
50%
60%
70%
80%
90%
100%
5 10 15 20 25 30
50 100 150 200 250
11.4 22.7 34.1 45.4 56.8
5 10 15 20 25 30
1.1 2.3 3.4 4.5 5.7 6.840
50
60
70
80
90
100
40
50
60
70
80
90
100Two Contactors
One Contactor
Two Contactors
One Contactor
Conditions: operating in combo at 20º C . Scfm N2 per module: 4-inch 0.05, 10-inch 0.20. Vacuum 50 torr for both.
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
CO2 Removal Performance of Two Membrane Contactors in Series with X-50 Fiber
Temperature = 25º C, pH = 4, CO2 = 50 ppm Inlet 6-inch was measured in combo mode with 0.6 G/L per Contactor air and 150 torr vacuum 10-inch was measured in sweep only mode with 25 scfm (40.25 m3/hr) air per contactor
Water Flow Rate (gal/min)
Water Flow Rate (m3/hr)
CO
2 R
emo
val
%
70
75
80
85
90
95
1000 10 20 30 40 50
0 2.3 4.5 6.8 9.1 11.4
Two Contactors
0
20
40
60
80
10044 88 132 176 220
One Contactor
Two Contactors
10 20 30 40 50
6 x 28 Extra-Flow 10 x 28
One Contactor
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Operating Pressure and Temperature of Celgard® PP Hollow Fiber
105 psi inlet pressure when using vacuum. If in sweep mode, add 15 psi.Different temperatures and pressures might apply to contactors using these fibers.
Max. O
peratin
g P
ressure
(Kg
/cm2
)
9.8
8.4
7.0
5.6
4.2
2.8
1.4
0
Operating Temperature (oC)20 30 40 50 60 70Max
. O
per
atin
g P
ress
ure
(p
sig
)
X40/X50 Fiber
140
120
100
80
60
40
20
0
Higher Limit for X40 10-inch Only
XIND Fiber
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Extractable Information High Purity Products
4 28 Extra-Flow, PP Membrane, PP Housing, Kalrez O-Rings, 5.0 gpm Flow Rate
TOC, ppb 1.34 35 Minutes
Resistivity, Megohm-cm 18.2 11.5 Hours
Particle, #/mL 0.1 0.79 1.35 Hours
There was no indication of Metallic or Ion Extraction in Samples Analyzed by IC, ICP-MS, and GFASS.
Note: this device is normally operated at higher flow rates than the 5 gpm used in this test. In reality, the rinse time is much faster to get to background.
Parameter Median Time to Reach Background Back ground
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
10 x 28 Extractable Information
14 hoursParticle, <1/mL 0.1
Time to Reach BackgroundParameter
2 hoursParticle, <10/mL 0.1
50 HoursResistivity, time to reach 0.2
mΩ-cm below background
50 HoursTOC, (within 2ppb of background)
Note: The water flow rate for extractables testing was 5 gpm due to limitations in the testing facility. The rinse up values would be much better at higher, or more typical, flow rates for this contactor. The test was ended at 100 hours.
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Company Overview A Look Inside of our Membrane Contactors How do the Contactors Work Product Summary System Design & Performance
ApplicationsApplications
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Applications
Removal of Dissolved Oxygen in the Microelectronics Industry
Removal of Carbon Dioxide to Extend the Life of Ion Exchange Beds and Improve Performance of EDI (Electrodeionization) Technology
Removal of Bulk Oxygen and Nitrogen in the Make-Up System
Removal of Oxygen in the Polishing Loop to <1ppb
Total Gas Control to Enhance Megasonic Cleaning Technologies
Removal of Dissolved Nitrogen from Blanketed Storage Tanks
Accurate Total Control of Dissolved Gasses at Point of Use
Removal of VOC’s from Liquids
Humidification of Gasses
Degassing Inks, Developers, Photo Resists and Other Emulsions in Imaging and Photographic Markets
Debubbling coating solutions used in paper manufacturing
Carbonation, Decarbonation and Nitrogenation in the Beverage Industry
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Possible Degasification Points in a Pure Water System
O2 removal and N2 control for Megasonic Cleaning Efficiency
Total Gas Control and Final Polishing of O2.
O2 Removal. Hybrid or Stand Alone system
Pretreatment RO RO Tank
EDI
DI Tank
Polishing Beds
UV
Final Filter
UV
Vacuum Tower
POU
Reclaim
CO2 Removal to improve EDI performance
O2 and CO2 Removal to Recycle Back into Loop
Liq
ui-
Ce
lL
iqu
i-C
el®®
Liq
ui-
Ce
lL
iqu
i-C
el®®
Liq
ui-
Ce
lL
iqu
i-C
el®®
Liq
ui-
Liq
ui-
Ce
lC
el®®
Liq
ui-
Ce
lL
iqu
i-C
el®®
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Possible Degasification Locations in a Boiler System
Liqui-Cel® Membrane Contactors
Lowering the Dissolved Oxygen
•Saves Chemical Costs
•Reduces Blow Down Costs
•Reduces Energy Costs
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Partial System Installation ListSYSTEM
(gpm) (M3/hr) SIZE
Beverage Asia 110 25 1 x 3 Deox Saturated <10 ppb
Beverage Europe 180 41 1 Carbonation
Beverage N. America 150 34 1 x 2 Deox Saturated 1 ppb
Boiler Asia 132 30 1 Deox Saturated N/A
Brewery Europe 165 38 1 x 2 Decarb/N2
Chemical Europe 88 20 1 Ammonia Removal 20 ppmIndustrial Asia 2500 568 3Industrial N. America 40 9 3 x 3 Deox SaturatedIndustrial S. America 135 30 Decarb 32 ppm CO2
Manufacturing N. America 200 45 3 x 3 Decarb 10 ppm <1.0 ppmMicroelectronics Asia 946 215 8 x 4 O2 removal Saturated <2.5 ppbMicroelectronics Asia 1012 230 7 x 3 Deox Saturated <10 ppbMicroelectronics Asia 880 200 6 x 5 Deox Saturated <1.0 ppbMicroelectronics Asia 550 125 5 x 5 Deox Saturated <1.0 ppb
Microelectronics N. America 1800 409 12 x 2 Decarb/Deox Saturated <100 ppbPharmaceutical Asia 29 7 5 Decarb 37 ppm 2 ppmPharmaceutical Asia 40 9 1 Decarb 20 ppm <1.0 ppmPharmaceutical Asia 13 3 2 Decarb 12.5 ppm <2 ppmPower Asia 44 10 1 x 1 Deox <1.0 ppbPower N. America 300 68 Deox/Decarb Saturated 10 ppbTFT LCD Asia 1050 239 7 x 3 DeoxTFT LCD Asia 836 190 4 x 3 Deox 10 ppbTFT LCD Asia 3690 900 15 x 12 Deox
INLET OUTLETFLOW RATE
MARKET REGION APPLICATION
Saturated <30 ppbTFT LCD Asia 7462 1696 4 sys.x8x1 Deox Saturated <500 ppb
Boiler N. America 150 1 x 2 Decarb 90% removal
Boiler Asia 308 70 1 x 4 Deox 30 ppb 10 ppb
34
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Degasification System on a Primary Storage Tank at a Power Plant
Membrane Contactor System Replaced Vacuum Tower Flow Rate 100 gpm (22.7m3/hr)Height:
– Liqui-Cel System: 6 ft.– Vacuum Tower: 30 ft.
Notice how compact the Liqui-Cel replacement system is. This allows a Liqui-Cel system to be placed virtually anywhere in a plant
Liqui-Cel Membrane Contactor System Vacuum Tower
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Design Basis: Design Basis: System Design:System Design: Outlet Achieved:Outlet Achieved:
3960 gpm (900 m3/hr) Fifteen Trains with <30 ppb Dissolved O2
77 oF (25o C) two 14 x 28 Contactors
Inlet O2 saturated in series
14-inch TFT System in Taiwan
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
14-inch TFT System in Taiwan
Design Basis: Design Basis: System Design:System Design: Outlet Achieved:Outlet Achieved:
484 gpm (110 m3/hr) Three Trains with <30 ppb Dissolved O2
72 oF (22o C) two 14 x 28 Contactors
Inlet O2 8.7 ppm in series
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Design Basis: Design Basis: System Design: System Design: Outlet Achieved: Outlet Achieved:
7,462 gpm (1,696 m3/hr) Four Systems each with <500 ppb Dissolved O2
72 oF (22o C) Eight Trains having one
Inlet O2 8.7 ppm 14 x 28 Contactor in series
14-inch TFT System in Taiwan
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Central UPW Deoxygenation System
Design Basis: Design Basis: System Design: System Design: Outlet Achieved:Outlet Achieved:
1,600 gpm (360 m3/hr) Eight Trains of three <1 ppb Dissolved O2
75 oF (24o C) 10 x28 Contactors
Inlet O2 saturated 8.9 ppb in series
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Central UPW Deoxygenation System
Design Basis: Design Basis: System Design: System Design: Outlet Achieved: Outlet Achieved:
600 gpm (136 m3/hr) Three Trains of Three <2 ppb Dissolved O2
70 oF (21o C) 10x28 Contactors
Inlet O2 2.0 ppm in series
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Oxygen Removal to < 5 ppb at IMEC- Microelectronics Research in Belgium
Design Basis: Design Basis: System Design: System Design: Outlet Achieved: Outlet Achieved:
79 gpm (18 m3/hr) One Train of Three 3 ppb Dissolved O2
67 oF (19.5o C) 10 x 28 Contactors
Inlet O2 5.14 ppm in series in make-up
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
6-inch Boiler Feedwater System in China
Design Basis: Design Basis: System Design: System Design: Outlet Achieved: Outlet Achieved:
79 gpm (18 m3/hr) Three Trains of Two 0.5 ppm Dissolved O2
60 oF (15.5o C) 6 x 28 Contactors
Inlet O2 9 ppm in series
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Boiler Degassing System in Beverage Plant
Design Basis:Design Basis: Outlet Achieved: System Design: Outlet Achieved: System Design:
308 gpm (70 m3/hr) <10 ppb Dissolved O2 Four 10 x 28 Contactors in Series
Inlet O2 30 ppb
Steam PressureSteam Pressure Boiler: Boiler: 16.6 Kg/cm2 (236 psi)
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Design Basis: Design Basis: System Design: System Design: Outlet Achieved: Outlet Achieved:
141 gpm (32 m3/hr) Three 10 X 28 <10 ppb Dissolved O2
77 oF (25o C) Contactors in series
Inlet O2 9 ppm Combo Mode (N2 plus
vacuum)
Oxygen Removal System for Display Plant in Asia
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Paulaner Brewery Deoxygenation System
Design Basis: Design Basis: System Design: System Design: Outlet Achieved: Outlet Achieved:
400 hl/h (18 m3/hr) Four 10 x 28 <20 ppb Dissolved O2
57.2 oF (14o C) Contactors in series
CO2 Sweep with Vacuum
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Boiler Degasification System
Design Basis:Design Basis:25 – 50 gpm (6 – 11 m3/hr)
77oF (25oC)
Inlet O2 Saturated (8.5 ppm)
System Design:System Design:
One or Two Parallel Trains of Two 4 x 28 Contactors in Series
28 in. Hg Vacuum (50 mm Hg Vacuum)
Outlet Achieved:Outlet Achieved:
< 500 ppb Dissolved O2
© 201
0 M
EM
BR
AN
A-C
HA
RLO
TT
E -
C
ON
FID
EN
TIA
L -
Benefits Summary
Small, Compact
Modular like other Water System Components
Reliable and Predictable
Responsive to Changes in Flow Rates
Total Gas Control in One Step
Proven in the Field with >15 Years of Installations
Warranty to < 1 ppb for O2 and < 1 ppm for CO2
Reduces Chemical requirements in water system making operation safer for employees and our environment
This product is to be used only by persons familiar with its use. It must be maintained within the stated limitations. All sales are subject to Seller’s terms and conditions. Purchaser assumes all responsibility for the suitability and fitness for use as well as for the protection of the environment and for health and safety involving this product. Seller reserves the right to modify this document without prior notice. Check with your representative to verify the latest update. To the best of our knowledge the information contained herein is accurate. However, neither Seller nor any of its affiliates assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of the suitability of any material and whether there is any infringement of patents, trademarks, or copyrights is the sole responsibility of the user. Users of any substance should satisfy themselves by independent investigation that the material can be used safely. We may have described certain hazards, but we cannot guarantee that these are the only hazards that exist.
Liqui-Cel, Celgard, SuperPhobic, MiniModule and MicroModule are registered trademarks of Membrana-Charlotte, A division of Celgard, LLC and nothing herein shall be construed as a recommendation or license to use any information that conflicts with any patent, trademark or copyright of Seller or others.
2010 Membrana – Charlotte. A Division of Celgard, LLC. ALL RIGHTS RESERVED (P58_rev 4 9/10)
Membrana GmbH 28 Oehder Strasse 28D-42289, WuppertalGermany Phone: +49 202 6099 - 658Phone: +49 6126 2260 - 41Fax: +49 202 6099 - 750
Membrana - CharlotteA Division of Celgard, LLC.13800 South Lakes DriveCharlotte, North Carolina 28273USA
Phone: 704 587-8888Fax: 704 587 8585
Japan OfficeShinjuku Mitsui Building, 27F1-1, Nishishinjuku 2-chomeShinjuku-ku, Tokyo 163-0427Japan
Phone: 81 3 5324 3361Fax: 81 3 5324 3369
www.liqui-cel.com