Lip Balm Production Line Week 9 update Ohimai Aisiku Stephanie Bloechl Kenneth Costello Jessica Dill...
-
Upload
teagan-norrington -
Category
Documents
-
view
215 -
download
0
Transcript of Lip Balm Production Line Week 9 update Ohimai Aisiku Stephanie Bloechl Kenneth Costello Jessica Dill...
Lip Balm Production Line
Week 9 updateOhimai Aisiku
Stephanie Bloechl
Kenneth Costello
Jessica Dill
Jeff Lariviere
Straining System Desired strainer type exist on
market
Need to determine what mesh sizes and what diameter are desired before contacting suppliers
Heating Structure
Securing Containers
Lip balm tray Hand salve tray
Capping Mechanism
• Two Pieces
• Spring-loaded cap with lock
• Body with release flaps
• Need to figure out how many caps are feasible to fit in capper – will determine size
Tube Flow AnalysisProblem Setup:
Equations:
Given an amount of time to fill a lip balm container, find required elevation H. Model as assumed laminar flow through standard ¼” (.125” ID) tubing of length L+H.
Time to fill (s) Q (m^3/s) V (m/s) Re f major HL (m) minor HL (m) H (m)1.00 4.44E-06 0.552 195.043 0.328 1.454 0.009 1.4941.25 3.55E-06 0.441 156.034 0.410 1.163 0.006 1.1891.50 2.96E-06 0.368 130.029 0.492 0.969 0.004 0.9871.75 2.53E-06 0.315 111.453 0.574 0.831 0.003 0.8442.00 2.22E-06 0.276 97.521 0.656 0.727 0.002 0.7372.25 1.97E-06 0.245 86.686 0.738 0.646 0.002 0.6542.50 1.77E-06 0.221 78.017 0.820 0.582 0.001 0.5882.75 1.61E-06 0.201 70.925 0.902 0.529 0.001 0.5343.00 1.48E-06 0.184 65.014 0.984 0.485 0.001 0.4893.25 1.36E-06 0.170 60.013 1.066 0.447 0.001 0.4513.50 1.27E-06 0.158 55.727 1.148 0.415 0.001 0.4193.75 1.18E-06 0.147 52.011 1.230 0.388 0.001 0.3914.00 1.11E-06 0.138 48.761 1.313 0.363 0.001 0.3664.25 1.04E-06 0.130 45.892 1.395 0.342 0.001 0.3444.50 9.86E-07 0.123 43.343 1.477 0.323 0.000 0.3254.75 9.34E-07 0.116 41.062 1.559 0.306 0.000 0.3085.00 8.87E-07 0.110 39.009 1.641 0.291 0.000 0.292
Results:
Material Selection Tested: Steel, Pyrex, Stoneware, and Porcelain
Compared room temperature wax removal to cooled ice removal
Preferred method of cleaning pot
Let residual mixture cool
Use ice to loosen residual (edge of ice quickly loosens material)
Wipe clean with paper towels
Hand wash with cold water
Tubing
Run through with cold water
Use bottle brush to clean out