liniLED PU H-Profile Spec Sheets 7-11-2014

orGaniC LiGHtinG SyStEMS 511 N. Virginia Ave., Azusa, CA 91702 t 626-969-6140 f 626-609-4288 e [email protected]

fLExiBLE LinEar LED MoDULE

liniLED® PU H-Profile is designed to create diffuse light lines whichcan be integrated into concrete or paving. The liniLED strip is en-capsulate in a cast polyurethane resin within Epoxy coated Stain-less steel bodies with IP67 connectors, creaing diffused light lineswhich are suitable for pedestrian or drive over.Manufactured in the EU/USA, RoHS. UL, ETLcs, CE

Available in all single colors and RGB. Standard lengths are 1’6”,3’3” and 6’6”, which can be inter- connected with the IP67 daisychain connectors. Special lengths may be available upon request.Coninuous runs from a single point can be up to 66t for singlecolors, 33t for Power and RGB and 19t for PSP. Curved Profilescan be manufactured.

Cold Warm Warm Natural Blue Red Amber GreenWhite White White White

liniLED Mono CoLor - SPECifiCationSLED SMD OSRAM TopLED LED Color Amber / Red / Green / Blue / White, 2700k /3000k / 4000k

6500k; CRI 90Beam / flux 120º; Dimensions 3.93”H x 1.18”WLength (m) Deco 66’, RGB & Power 33’, PSP 19’Bend radius Custom

outdoor (iP68) Wet location; drive-over ratedWatts and Voltage 24VDC; Deco 1 w/ft, Power 1.28 w/ft, RGB 1.8 w/ft,

PSP 2.89 w/ft; ETL / CEMaterial Stainless Steel 316, PolyurethaneDimmable Pulse Width Modulation, or 0-10V; or 120V Electronic with

special Power supply.Life 50,000 illuminating hours or 5 years limited warranty;

(mfc.data at 25ºC) LM-7924VDC Select appropriate wattage power supplies,

according to run length and number of runsaccessories Dimming controllers; connector sets; extension cords

RoHS. UL, ETLcs, CE

PU H-Profile

1.18”

3.93”

3.15”

15.75” / 39.37” / 78.74”

PU H-Profile:Custom made to order withcolor temperature and lumen output desired.

PU Mounting Profile:Stainless Steel

PU SplitterMono Colorsand RGB

PU End Plate L 3.23” x W 1.3” x H 3.94”

PU Mounting BracketL 5.12” x W .94” x H .40”

PU ConnectorMono Colors andRGB


tECHniCaL Data

For a full list of components and accessories see Accessories page.

S P E C i f i C a t i o nfLExiBLE LinEar LED MoDULE

Descripion Max runLength no. of LEDs(per t) V/DC Current (a) Color Cri Lumens W/t Bin

DECo

RGB 33 t 11 24 350mA RGB 37 1.8Amber 66 t 11 24 350mA 587 nm 4.45 0.5

Red 66 t 11 24 350mA 617 nm 11.11 1Green 66 t 11 24 350mA 525 nm 33.9 0.8Blue 66 t 11 24 350mA 469 nm 3.99 0.6

Cool White 66 t 11 24 350mA 6500 K 90 38.83 0.7 FineNatural White 66 t 11 24 350mA 4000 K 90 33.25 1 FineWarm White 66 t 11 24 350mA 3000 K 90 33.25 1 Fine

PowerCool White 33t 11 24 350mA 6500 K 90 122 1.28 Fine

Natural White 33 t 11 24 350mA 4000 K 90 122 1.28 FineWarm White 33 t 11 24 350mA 3000 K 90 122 1.28 FineWarm White 33 t 11 24 350mA 3000 K 90 122 1.28 Fine

PSPCool White 19.5 t 32 24 350mA 6500 K 90 258 2.89 Fine

Natural White 19.5 t 32 24 350mA 4000 K 90 258 2.89 FineWarm White 19.5 t 32 24 350mA 3000 K 90 258 2.89 FineWarm White 19.5 t 32 24 350mA 2700 K 90 258 2.89 Fine

7/11

liniLED® tHE DiffErEnCE Specification Grade. Made entirely in the EU / USa.

The LEDs are the latest Osram Topled they have the highest light output for the lowest energy, offering energy savings of upto80% for cove lighting applications.. Protected with IP68 PVC encapsulation, with a hollow chamber protecting phosphors againstcolor shift. By partnering with Osram we know the source of the LEDs and the packaging (assembly) process. - The only way toensure repeatability over time with LEDs is to know the source of every component, from the copper foil to the last resistor.

Osram’s binning for mid-range LEDs is arguably the best in the world, which means that the color matching both initially and forthe life of the LEDs is consistent. Liniled binning is better than 3 MacAdam ellipses.. The liniLED circuit is a patented custom de-sign, with top level electronic components and an IC every 8" to further control the input to the LEDs, protecting them againstcolor shift and reduced LED life. LiniLED is a superior product to Osrams normal standards.

A simple but convincing test is to run liniLED and hold the strip in your hand. There will be no perceptible heat in comparison withother products. With LEDs heat is the killer!

One of the most common misunderstandings is that you can place LEDs in inaccessible places because they are solid state, areshockproof and have a long life. LEDs are all of that, but they are operated by computerized electronic circuits on PC boards withmany more components, which is why we seal and protect liniLED against all the elements, but ensure that maintenance and fu-ture replacement are feasible.

liniLED is the best and most energy efficient product of it’s kind! Our design and automated production makes it affordable andthe least expensive product to install.

PU H-Profile

J U S t 5 E a S y S t E P S t o S P E C i f y

1. SELECt ProDUCt anD CoLor

liniLED PU H-ProfileDeco RGB 1’6” 023021Deco RGB 3’3” 023001Deco RGB 6’6” 023011Deco Red 1’6” 023026Deco Red 3’3” 023006Deco Red 6’6” 023016Deco Amber 1’6” 023027Deco Amber 3’3” 023007Deco Amber 6’6” 023017Deco Green 1’6” 023025Deco Green 3’3” 023005Deco Green 6’6” 023015Deco Blue 1’6” 023024Deco Blue 3’3” 023004Deco Blue 6’6” 023014Deco Warm White 3000K 1’6” 023022Deco Warm White 3000K 3’3” 023002Deco Warm White 3000K 6’6” 023012Deco Natural White 4000K 1’6” 023028Deco Natural White 4000K 3’3” 023008Deco Natural White 4000K 6’6” 023018Deco Cool White 6500K 1’6” 023023Deco Cool White 6500K 3’3” 023003Deco Cool White 6500K 6’6” 023013

Power Warm White 2700K 1’6” 023030Power Warm White 2700K 3’3” 023040Power Warm White 2700K 6’6” 023050Power Warm White 3000K 1’6” 023031Power Warm White 3000K 3’3” 023041Power Warm White 3000K 6’6” 023051Power Natural White 4000K 1’6” 023032Power Natural White 4000K 3’3” 023042Power Natural White 4000K 6’6” 023052Power Cool White 6500K 1’6” 023033Power Cool White 6500K 3’3” 023043 Power Cool White 6500K 6’6” 023052

PSP Warm White 2700K 1’6” 023034PSP Warm White 2700K 3’3” 023044PSP Warm White 2700K 6’6” 023054PSP Warm White 3000K 1’6” 023035PSP Warm White 3000K 3’3” 023045PSP Warm White 3000K 6’6” 023055PSP Natural White 4000K 1’6” 023036PSP Natural White 4000K 3’3” 023046PSP Natural White 4000K 6’6” 023056PSP Cool White 6500K 1’6” 023037PSP Cool White 6500K 3’3” 023047PSP Cool White 6500K 6’6” 023057

3. MoUntinG

PU Mouning Profile

PU Mouning Profile 1’6” 023100PU Mouning Profile 3’3” 023101PU Mouning Profile 6’6” 023102

PU Mouning Bracket 023103

PU End Plate 023104

2. ConnECtinG

PU Power Connector setsIP67

Mono PU Connector 16’ 014530Mono PU Connector 32’ 014507RGB PU Connector 16’ 014531RGB PU Connector 32’ 014517

PU Extension CordsIP67

Mono PU Extension Cord 16’ 014508Mono PU Extension Cord 32’ 014509RGB PU Extension Cord 16’ 014518RGB PU Extension Cord 32’ 014519

PU SpliterIP67

PU Spliter 014510

fLExiBLE LinEar LED MoDULE

orGaniC LiGHtinG SyStEMS 511 N. Virginia Ave., Azusa, CA 91702 t 626-969-6140 f 626-609-4288 e [email protected]/11

PU H-Profile

J U S t 5 E a S y S t E P S t o S P E C i f y

4. PoWErinG anD rUn LEnGtH

Power Supply indoor/outdoorNon Dimmable Power Supply20w 01131030W 011307100W 011321150W 011327240W 011331Dimmable Power Supply30W 011308 100W 011321150W 011328240W 011332

Plug in Power Supply indoor

120W 011323

Power Supply indoor

320W 011335500W 011339

Magneic Power SupplyiP67 outdoor rated ; only for Mono Colors

20W M20L24DC-AR60W M60L24DC-AR100W M100L24DC-AR 150W M150L24DC-AR200W M200L24DC300W M300L24DC


5. ControLLinG

Dimmer with on/off Push Switch; 011455Dims standard power supplies; Max. 280W @ 24VDC.

rGB Stand-alone Controller 011100For demo or wall box mouning; Max 120W @ 24VDC4.3/4” x 1.7/16” x 7/8”H

rGB / DiM Wall Control set 011101Wall mouning with IR Remote; Max 2 Amp

Lin100a1 100W DMx rGB/Dim 011341Controller / Power supply unit Max.100W @24VDC;Onboard and remote addressing & programmingDMX/Dali/0-10V

LLin100D2 100W DMx rGB/Dim 011343Controller. Max.100W @24VDC; Onboard and remote addressing

& programming. DMX/Dali/0-10V

Lin180D2 180W DMx rGB/Dim 011344Controller. Max.180W @24VDC; Onboard and remote addressing & programming. DMX/Dali/0-10V

Lin720D2 720W DMx rGB/Dim 011345Controller. Max.720W @24VDC; Onboard and remote addressing & programming. DMX/Dali/0-10V

DiMWHEEL/CoLor Wall 011342Programmable On/Off RGB color wheel forLIN100/180/720, 10A. 24VDC

7/11

fLExiBLE LinEar LED MoDULEPU H-Profile

installing:liniLED PU H-Profile is easy to specify and simple to install. 1Power Supplies / Controls – 24V.DC Constant Voltage: - 4 Check the Power Supplies Guide and select dimmable or nondimming Power Supplies corresponding to the total wattage to beconnected.. Select the Organic Lighting Dimming controls.if re-quired. 3Power Cords with Connector: 2Select the power Connector cord sets, either 16’ or 32’ long to matchthe number of runs.Mounting: 1 Stainless Steel housing unit

120 -277V


inStaLLationM o n o C o L o r i n S t a L L i n G & D i M M i n G

ConnECtion DiaGraM Mono CoLorCable guages from remote power supply.18 AWG up to 10’16 AWG up to 20’14 AWG up to 40’ 12 AWG up to 60’ 10 AWG up to 100’

liniLED® DiMMinG ControLELECtroniC 0-10V; PWM; or oUrMaGnEtiC aC DiMMaBLE PoWErSUPPLiESliniLED is dimmable using 1-10v or Pulse Width Modulaion (PWM) controls.

– Dim with simple 1-10V dimmers or DMX/RDMdimmer controls.

– Dim only on the DC side.2 Wire aC dimming -Electro-magneicPower supplies can be supplied. (requireLutron or other approved Electronic lowvoltage dimmer controls).

– Dimming on the AC side require special Mag-neic power supplies , which must be specifiedwhen ordering.

7/11

fLExiBLE LinEar LED MoDULEPU H-Profile

By adjusing the underside of the liniLED® PU Lines it is now possible to create an angle of 90° degrees.

liniLED PU H-Profile Spec Sheets 7-11-2014

Documents

Transcript of liniLED PU H-Profile Spec Sheets 7-11-2014