Liner Stairs 2012 -...

2
Medallion Pools Liner Corner Stairs Was your pool built without stairs? Are you getting older and the climb up and down the pool ladder isn’t like it used to be? Have you been told that installing a set of swimming pool stairs into your existing pool would require that your concrete deck be broken up and that the cost would be several thousand dollars? Are you having a new pool built and your yard size will not allow you to install pool stairs that extend beyond the edge of the pool? If you answered yes to any of these questions then you need a set of Medallion Corner Stairs! Just look at these features: Manufactured to our highest quality standards to assure easy and accurate assembly. All 14 guage galvanized steel structure means these stairs are strong and built to last. Can easily be assembled and installed in less than one hour. Standard models are available for both 42” and 48” pool walls. Standard models available to fit a true 6” radius corner, a square (90 degree) corner, or a 6” radius diagonal corner (4-1/2” diagonal). If one of those models doesn’t fit your pool don’t worry. Custom stairs are available, just contact your Medallion representative for assistance. Excellent option for pools with retractable covers.

Transcript of Liner Stairs 2012 -...

Page 1: Liner Stairs 2012 - 041aae1.netsolhost.com041aae1.netsolhost.com/.../sites/2764/2018/07/Liner-Stairs-2012.pdf · Custom Liner Stairs Need custom made stairs for your inground pool?

Medallion PoolsLiner Corner Stairs

Was your pool built without stairs? Are you getting older and the climb up and down the pool ladder isn’t like it used to be? Have you been told that installing a set of swimming pool stairs into your existing pool would require that your concrete deck be broken up and that the cost would be several thousand dollars? Are you having a new pool built and your yard size will not allow you to install pool stairs that extend beyond the edge of the pool?

If you answered yes to any of these questions then you need a set of Medallion Corner Stairs!

Just look at these features:

Manufactured to our highest quality standards to assure easy and accurate assembly.All 14 guage galvanized steel structure means these stairs are strong and built to last.Can easily be assembled and installed in less than one hour.Standard models are available for both 42” and 48” pool walls.Standard models available to fit a true 6” radius corner, a square (90 degree) corner, or a 6” radius diagonal corner (4-1/2” diagonal).If one of those models doesn’t fit your pool don’t worry. Custom stairs are available, just contact your Medallion representative for assistance.Excellent option for pools with retractable covers.

•••••

Page 2: Liner Stairs 2012 - 041aae1.netsolhost.com041aae1.netsolhost.com/.../sites/2764/2018/07/Liner-Stairs-2012.pdf · Custom Liner Stairs Need custom made stairs for your inground pool?

Medallion Swim Pool Company, Inc.840A West Roslyn RoadColonial Heights, VA 23834Phone: (804) 526-POOL (7665)Fax: (804) 526-1200E-Mail: [email protected]: www.medallionpools.comProudly made in America.

Note: Medallion Swim Pool Company, Inc. tries to associate with the best independent contractors and dealers. Independent contractors and dealers installing Medallion Products are independent business people and Medallion Swim Pool Company, Inc. does not assume any responsibility for the installation and service performed by these independent contractors or dealers. It is the responsibility of the installer to ensure that the appropriate stairs for a particular job are ordered and installed. It is the installer’s responsibility to ensure that all building codes are followed as well as APSP and ANSI safety standards. Decking, siding, brickwork, and other forms of finished work and material in and/or around the pool shown are for illustrative purposes only and are not included with stairs.

Design Changes: All measurements, drawings, and sizes are approximate. All dimensions, whether in this brochure or in other printed media are approximate. The manufacturer reserves the right to change or modify any product without incurring any liability or obligation to supply or install those changes on items sold in the past, present, or future.

Your Local Medallion Independent Contractor/Dealer Is:

Medallion PoolsCustom Liner Stairs

Need custom made stairs for your inground pool? Look no further than Medallion. Wall to wall and recessed liner stairs are some of our top sellers. All of our stairs are manufactured from top quality 14 guage galvanized steel for strength and durability. Our unique design allows us to offer you a

product that is not only of the highest quality, but also incredibly affordable.

Easy to install.Available for virtually any shape or wall height, including freeform pools.Extended tread widths available for suntanner and lounging areas.Excellent option for pools with retractable covers.

Call your Medallion representative today to find out more!

••••