Linear & Rotary Actuators E-15 - Oriental Motor U.S.A. … Linear & Rotary Actuators E-15 Electric...

E-15

Linear & Rotary Actuators E-15

Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

EAS Series

AR Equipped

Linear & Rotary Actuators

Electric Linear Slides

Page

EAS Series AR Equipped ·························· E-16

E-16

E-16

ORIENTAL MOTOR GENERAL CATALOG 2015/2016

Page Features E-16 / System Configuration E-24 / Product Line E-26 / Specifications E-30

Dimensions E-36 / Operating Data E-45 / Actuator and Driver Combinations E-51

■Features

Highly Accurate Positioning Operation

The ball screw is rotated by a AR Series motor to drive a table fixed to a ball screw nut. The guide rail can guide accurate linear motion and support the weight of the load, making highly accurate positioning of a large load possible.

Guide Rail

Table

Motor

Coupling

Guide Block

Ball Screw

Ball Screw Nut Bearings

Straight Type Reversed Motor Type

✽Photo shows the Right side Type

View Expanded Product Information, Specifications, CAD, Accessories & more online.Visit www.orientalmotor.com/catalog or use the QR code and select "EAS Series".

Electric linear slides that offer high performance, from low speed to high speed or with light loads or heavy loads, regardless of demanding operating conditions.

• Highly Accurate and Responsive Positioning Operation

• Compact, Powerful and Suitable for a Wide Variety of Applications

• Incorporates a Ball Screw Design

• Supports Large Transportable Mass

• Easy Belt Replacement (Reversed Motor Type)

What is FLEX?FLEX is the collective name for products that support I/O control, Modbus (RTU) control, and FA network control via network converters.These products enable simple connection and simple control, shortening the total lead time for system construction.

Electric Linear Slides

EAS Series AR Series Equipped

<Additional Information>•Technical reference ➜ Page H-1•Regulations & Standards ➜ Page I-2

E-17


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals

www.orientalmotor.com Technical Support

TEL: (800) 468-3982E-mail: [email protected]

Capable of a Variety of Movements, Regardless of the Operating Conditions!

Offering the ability from low speed to high speed or with light loads or heavy loads, these electric linear slides are easier to use and offer high performance regardless of demanding operating conditions.

●Quick and ResponsiveThe high response of the closed loop motor and drive system provides superior short-distance positioning.

Since the AR Series operates synchronously with pulse commands and generates high torque with a compact body, it offers excellent acceleration performance and response.

Motor Movement Waveform

Positioning Completion Signal

Operation Command

Example Product:

Product Name: EAS4Lead Screw Pitch: 12 mmPower Supply Input: 230 VAC

Example Operation:

Horizontal Load Mass: No loadInching Drive: 60 mm (forward path 3 times),

180 mm (return path once)Operating Speed: 800 mm/sAcceleration: 20 m/s2 (2 G)

60 mm

180 mm

60 mm60 mm

Forward Path

Return Path

60mm

60mm

60mm

Time (Scale: 200 ms)

Spee

d (S

cale

: 100

0 m

m/s

)

Operation Commands

Actual Movement

Start Signal

Positioning Completion Signal

When driven 60 mm, the positioning time (theoretical value): 114 ms, actual movement follows without delay.

Actual movement of the electric linear slide in relation to operation commands180mm

This contributes to an increase in machine throughput.

E-18

E-18Electric Linear Slides EAS Series




●High-Speed

The positioning time, operating speed and

acceleration can all be easily determined.

The product can be selected while estimating

the movement from the same graph, even under

changing operating conditions such as no load

or inching.

Let our technical team help find the right

actuator based on your profile demands.

Only at Oriental Motor!

15 kg500mm

Example Product:Product Name: EAS6Lead Screw Pitch: 6 mmPower Supply Input: 230 VAC

Example Operation:Load Mass: 15 kgPositioning Distance: 500 mmDrive Direction: Vertical

High-Speed with a Heavy Load

Load Mass: 15 kgPositioning Distance: 500 mmPositioning Time: 1.77 sOperating Speed: 320 mm/sAcceleration: 1.5 m/s2 (0.15 G)

High-speed is possible when transporting

a heavy load in a vertical direction.

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg15 kg30 kg

Positioning Distance [mm]

Posi

tioni

ng T

ime

[s]

Load Mass

0 100 200 300 400 500

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg15 kg30 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass

100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg15 kg30 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass

1.5 m/s2

(0.15 G)

320 mm/s

1.77 s

Positioning Time

Operating Speed

Acceleration

High-Speed during Inching Operation

Load Mass: 15 kgPositioning Distance: 20mmPositioning Time: 0.14 sOperating Speed: 200 mm/sAcceleration: 4.7 m/s2 (0.5 G)

Operation is possible at high speed during

inching operation over short distances.

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg15 kg30 kg


Posi

tioni

ng T

ime

[s]

Load Mass

0 100 200 300 400 500

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg15 kg30 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass

100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg15 kg30 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass

During inching operation (20 mm)4.7 m/s2 (0.5 G)

During inching operation (20 mm)200 mm/s

Positioning Time

Operating Speed

Acceleration

During inching operation (20 mm)0.14 s

High-Speed with a Light Load

Load Mass: 0 kgPositioning Distance: 500 mmPositioning Time: 1.4 sOperating Speed: 400 mm/sAcceleration: 2 m/s2 (0.2 G)

Operation is possible at an even higher speed when

the load is absent, for example on the return.

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg15 kg30 kg


Posi

tioni

ng T

ime

[s]

Load Mass

0 100 200 300 400 500

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg15 kg30 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass

100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg15 kg30 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass

Positioning Time

Operating Speed

Acceleration

2 m/s2 (0.2 G) with no load

1.4 s with no load

400 mm/s with no load

E-19


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



●Stability at Low SpeedsThanks to the closed loop motor drive system smooth drive function✽, resolution can be improved without a mechanical element. As a result, speed fluctuation is minimal even at low speeds, leading to improved stability.

✽About the smooth drive function:The smooth drive function automatically microsteps based on the same traveling amount and traveling speed used in the full step mode, without changing the pulse input settings.

Example Product:Product Name: EAS4Lead Screw Pitch: 12 mmPower Supply Input: 230 VAC

Example Operation:Horizontal Load Mass: 0.5 kgRunning Current: 100%Resolution: 0.01 mm/stepOperating Speed: 1.25 mm/s

0.5 kg

Low-speed Operation: 1.25 mm/s

0 0.1 0.2 0.3 0.4 0.5

1

109

8

7

6

5

4

3

2

Time [s]

Spee

d [m

m/s

]

Actual Slide Table Speed in Relation to Operation Commands (1.25 mm/s)

Speed fluctuation is minimal even at a low speed of 1.25 mm/s.

Speed fluctuations are minimal even at low speed.

Compact and Powerful!

●Compact, High Accuracy, High Rigidity Slides

✽ “LM Guide” is a registered trademark of THK Co., Ltd.

TableBall ScrewBall Screw Nut

Guide BlockGuide Rail

Side Cover

This electric linear slide incorporates a ball screw and a THK-manufactured LM Guide✽ as the guide. Since the high-accuracy LM Guide is directly installed in the enclosure base, these slides are suitable for applications which require traveling parallelism. (Traveling parallelism 0.03 mm)

Being compact and stiff, this series is effective in supporting large transportable mass.

For EAS6

◇EAS6 Type Transportable Mass ●Max. Horizontal Transportable Mass: 60 kg ●Max. Vertical Transportable Mass: 30 kg

◇Horizontal InstallationEven if the overhung length is 1 m, a pushing force of up to 110 N is possible.

◇Vertical InstallationIf the overhung length is 0.24 m, a load of up to 10 kg may be transported.

Load 10 kg

Static Permissible Moment

The moment load permitted by the linear guide while stopped

Dynamic Permissible Moment

The moment load permitted by the linear guide during operation

Overhung Distance 1 m

Pushing Force110 N

MR

Acceleration3 m/s2

MP

Overhung Distance 0.24 m

The pushing force of the load are values calculated from the EAS6 static permissible moment of 110.0 N·m and dynamic permissible moment of 31.8 N·m. (The weight of the board has not been taken into account.)Dynamic Permissible Moment [N·m] MP: 31.8 MY: 10.3 MR: 40.6Static Permissible Moment [N·m] MP: 86.0 MY: 34.0 MR: 110.0

●Direction of Motor InstallationReversed Motor types are provided for all electric linear slides. This contributes to a shorter overall length and space savings.

EAS4 with Electromagnetic Brake Type Stroke 200 mm

MotorMotor

MotorMotorMotor

457 mm

343 mmReversed Motor Type

Straight Type

Shorter by more than 100 mm✽!

✽When electromagnetic brake is installed

E-20





●Cable Outlet DirectionRotatable in 4 directions (3 directions for Reversed Motor types)

Motor cable can be changed to any direction by simply rotating the motor. There is no need to leave space behind the motor since the cable outlet is on one side of the motor, allowing for easy connection and saving space.

90°

Easy Belt Replacement (Reversed Motor Type)

Thanks to Oriental Motor's unique belt tension adjustment mechanism, belt replacement is easy.

Tension Adjustment SpringTension Adjustment Screw

Tension Adjustment SpringTension Adjustment Screw

If the screw is loosened, the belt tension is adjusted to an appropriate value by the force of the spring.

Sensor Installation (For electric linear slides)

Sensor rails are equipped on both sides of the electric linear slide. The position of the sensor that is included in the sensor set (sold separately) can be secured. The sensor cable can be stored within the rail. In addition, the shield plate (included in the sensor set) can be installed on the drive table for the X-table type.

●Photo is an installation example of the X-table type. For the Y-table type, a shield plate needs to be installed on the load side.

About Push Motion Return-to-Home

Push motion return-to-home has been difficult to implement at high speed because, in this type of return-to-home operation, the table is pressed against the actuator body. In addition, the table is pressed against a urethane damper, etc. to absorb shocks, which may cause positional errors over time. By developing a structure that utilizes a special rubber stopper and pushes on the end surface of the metal components, highly reliable high-speed return-to-home is possible.

Rubber Stopper

① Operate at high speed

Table Actuator Body

Absorb the shock of collision.

② Operate at low speed after contacting the rubber stopper

Push in completely

③ Reversed once the metal surfaces make contact.

④ Operate only for fixed amount and stop

E-21


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



■ AR Series Equipped

EAS Series is equipped with the AR Series motor and driver package which means a common drive platform for many actuator type applications.For increased flexibility, utilize the Built-in Controller (Stored Data) type driver with the information necessary for the actuator operations built into the drive. The burden on the host PLC (Master Controller) is reduced.

●A Variety of Products with a Unified Control MethodAll products in the AR Series group have unified controllability.

Electric Linear SlidesEAS Series

Closed Loop Motor Package

AR Series

Electric CylindersEAC Series

Hollow Rotary Actuators

DG Series

●Data Setting Software and Control ModuleThe data setting software and the control module can both be used together with the AR Series.

Data Setting Software MEXE02The data setting software can be downloaded from the website.

Control Module OPX-2A (Sold separately)

■2 Driver Types Available Depending on the System Configuration

2 types of EAS Series drivers are available to match the requirements of the host PLC (Master Controller).

Built-in Controller Type ● When controlled via I/O ● When controlled via

computer or touch screen (HMI)

● When controlled via serial communication

● When controlled via a Factory Automation (FA) network

By using a network converter (sold separately), CC-link communication, MECHATROLINK or EtherCAT communication are possible. Operating data, parameter settings or operation commands can be input via the various communication types.

● The burden on the programmable master controller is reduced and costs are lowered when multiple axes are used. ● Unifies slaves for compatibility with various networks. ● Can also handle group sending function between slaves.

■ CC-Link compatibility: Max. 12 axes.

■ MECHATROLINK and EtherCAT compatibility: Max.16 axes.

①I/O ②Modbus (RTU)

I/O

Positioning module not

requiredCPU

Power Supply

②Modbus (RTU)

Serial Communication Module

CPU

Power Supply

②RS-485

③FA Network

Network Converter

CPUPower Supply FA Network Module

Built-in Controller (Stored Data) Type where the operating data is set in the driver,

and the operating data is selected and executed from the host system.

Host system connection and control is performed with① I/O, ② Modbus (RTU)/RS-485 or ③ Factory Automation (FA) network.

● is a registered trademark of the CC-Link Association and is a registered trademark of the MECHATROLINK Association.

● is a registered trademark licensed by Beckhoff Co., Ltd. of Germany

Pulse Input Type

Pulse Input

CPUPower Supply I/O Positioning

Module

Operations are executed by inputting pulses into the driver. Motor control is carried out from the positioning module (pulse oscillator) as provided by the customer.

E-22





■Product Line

Table Straight Type Reversed Motor Type (Right side / Left side)

X-Table✽1

Photo shows the right side type

Y-Table✽2

Photo shows the right side type

● A built-in controller type and pulse input type are available, in both AC input and DC input types. ✽1 Infiltration of falling foreign particles can be reduced when installed horizontally.

Table

✽2 Infiltration of falling foreign particles can be reduced when wall-mounted.

Table

✽Support guide and installation brackets supplied by the customer.

The image below shows a three axes system using the electric linear slide EAS Series on the X-Y axis and the electric cylinder EAC Series on the Z axis.

Electric Cylinders EAC SeriesZ-AxisReversed Motor Type with Shaft Guide Cover

Space-saving due to the reversed motor.Electric Linear Slides EAS SeriesY-AxisReversed Motor Type

Space saving due to the reversed motor.

Electric Linear Slides EAS Series X-AxisStraight Type

Support Guide✽

Installation Bracket✽

Z

X

Y

E-23


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



How to Read Specifications Table

■Electric Linear Slide Specifications

Drive Method Ball Screw Resolution [P/R] 100∼10000 Dynamic Permissible Moment [N·m] MP:16.3 MY:4.8 MR:15.0Static Permissible Moment [N·m] MP:58.3 MY:16.0 MR:53.3Repetitive Positioning Accuracy [mm] ±0.02 Traveling Parallelism [mm] 0.03

Product NameLead Screw Pitch

[mm]Transportable Mass [kg] Thrust

[N]Push Force

[N]Holding Force

[N]Maximum Speed

[mm/s]Horizontal VerticalEAS4□-D□□□-ARAK ■■- 3

12 ∼15−

∼70 100 70 600EAS4□-D□□□-ARMK ■■- 3 ∼7EAS4□-E□□□-ARAK ■■- 3

6 ∼30−

∼140 200 140 300EAS4□-E□□□-ARMK ■■- 3 ∼14

① Drive MethodMechanism used to convert motor rotation to linear motion.

② Repetitive Positioning AccuracyA value indicating the amount of error that is generated when positioning is performed repeatedly to the same position in the same direction.Note

●The repetitive positioning accuracy is measured at a constant temperature under a constant load.

③ ResolutionThis is the number of pulses for 1 rotation of the motor.A desired setting can be made between 100∼10000 [P/R] for the motor resolution.For the resolution setting, refer to the AR Series User Manual.

④ Traveling ParallelismRunout widths in the vertical and lateral directions between the installing surface of the electric linear slide and the top surface of the table.

⑤ Dynamic Permissible MomentThe load moment acts on the linear guide if the load position is offset from the center of the table.The direction of action applies to three directions (pitching (MP), yawing (MY), and rolling (MR)) depending on the position of the offset.The dynamic permissible moment is the moment allowed during operation.

⑥ Static Permissible MomentThe load moment acts on the linear guide if the load position is offset from the center of the table.The direction of action applies to three directions (pitching (MP), yawing (MY), and rolling (MR)) depending on the position of the offset.The static permissible moment is the moment allowed during static conditions.

⑦ Lead Screw PitchDistance the table moves linearly in one motor rotation.

⑧ Transportable Mass ●Horizontal Direction

Mass that can be moved under operating performance in the horizontal direction of the electric linear slide.

●Vertical DirectionMass that can be moved under operating performance in the vertical direction of the electric linear slide.Note

●Note that if a EAS4 product with 12 mm lead screw pitch presses upward a transportable mass of 4 kg or more and returns to home position, the home position may vary.

⑨ ThrustForce from the table that pushes the load when speed is constant.

⑩ Push ForceThe pressure applied to the load during the pushing operation.Note

●Use it with the pushing operation speed at 25 mm/s or less, and within the dynamic permissible moment.The pulse string input type has a pushing operation function, but no return-to-home pushing function.

⑪ Holding ForceHolding force when the motor is stopped or when the electromagnetic brake is operating, while power is supplied.

⑫ Maximum SpeedMaximum speed allowed when transporting the maximum transportable mass. Note

● If DC power is supplied, the maximum speed may decrease depending on the ambient temperature and motor cable length.

⑩ ⑪ ⑫⑦

① ② ③ ⑤

⑥④

⑧ ⑨

E-24





Control Module

➜ Page E-150 Data Setting Software

Communication Cable

➜ Page E-150

Accessories (Sold separately)✽2

Computer✽1

To USB Port

or

RS-485

Communication Cables

➜ Page E-145, 149 Battery Set

➜ Page E-151 Sensor Sets

➜ Page E-152

Example of System Configuration●

EAS Series

Sold Separately

Sensor Set

EAS4X-E050-ARMCD-3 PAES-S-4X$1,673.00 $160.00

● The system configuration shown above is an example. Other combinations are available.

■System Configuration

●When Equipped with AR Series, Built-in Controller Type with Electromagnetic BrakeAn example of a configuration using I/O control or RS-485 communication is shown below. ✽1 Not supplied

✽2 Required for push-motion operation via function extension.

Electric Linear Slide AR Series

Driver

For Electromagnetic Brake

For Motor

The product comes with a 3 m (9.8 ft.) cable (for motor and electromagnetic brake).

EAS Series

Accessories (Sold separately)

Sensor✽1

Programmable

Controller✽1

Main Power Supply

Cables used for EMC directive evaluation

Using an accessory connection cable.(Not using the cable included with the products.)

Using an accessory extension cable with the included 3 m (9.8 ft.) cable.

(For motor) (For electromagnetic brake) (For motor) (For electromagnetic brake)

Connection Cable Sets

Flexible Connection Cable Sets

AC Input ➜ Page E-141DC Input ➜ Page E-146

Extension Cable Sets

Flexible Extension Cable Sets



or

Network Converters

➜ Page F-8

Peripheral Products (Sold separately)

24 VDC Power Supply

for Control✽1

Data Setting Software

MEXE02

(For RS-485 communication)

E-25


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



Connector - Terminal Block

Conversion Units

➜ Page E-143, 148 Sensor Sets

➜ Page E-152 General-Purpose Cables

➜ Page E-143, 148

Example of System Configuration●

EAS Series

Sold Separately

Controller Sensor SetConnector-Terminal Block

Conversion Unit 1 m (3.3 ft.)

EAS4X-E050-ARMC-3 SCX11 PAES-S-4X CC36T10E$1,673.00 $349.00 $160.00 $284.00

● The system configuration shown above is an example. Other combinations are available.

Control Module

➜ Page E-150 Data Setting Software

Communication Cable

➜ Page E-150

Accessories (Sold separately)✽2

Electric Linear Slide AR Series

Driver


For Motor

The product comes with a 3 m (9.8 ft.) cable (for motor and electromagnetic brake).

EAS Series


Controller

➜ Page F-12

Controller (Sold separately)

To USB Port

24 VDC Power

Supply✽1

Programmable

Controller✽1

or

or

Main Power Supply

Sensor✽1


24 VDC Power Supply✽1Computer✽1

Data Setting Software

MEXE02

Cables used for EMC directive evaluation

Using an accessory connection cable.(Not using the cable included with the products.)

Using an accessory extension cable with the included 3 m (9.8 ft.) cable.

(For motor) (For electromagnetic brake) (For motor) (For electromagnetic brake)

Connection Cable Sets

Flexible Connection Cable Sets


Extension Cable Sets

Flexible Extension Cable Sets



or

●When Equipped with AR Series, Pulse Input Type with Electromagnetic BrakeAn example of a single-axis system configuration with the SCX11 controller is shown below. ✽1 Not supplied

✽2 Required for push-motion operation via function extension.

E-26





■Product Number

EAS 4 R X - D 025 - AR M K D - 3 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪

① Series Name EAS: EAS Series

② Linear Slide Size 4: 58.4 mm (W) × 60 mm (H)6: 75.4 mm (W) × 83 mm (H)

③Motor Orientation L: Reversed Motor Type (Left Side)

R: Reversed Motor Type (Right Side)BLANK: Straight Type

④ Table Orientation X: X-TableY: Y-Table

⑤ Lead Screw Pitch D: 12 mmE: 6 mm

⑥ Stroke 005∼050: 50 mm ∼ 500 mm (50 mm increments)⑦ Motor AR: AR Series

⑧ Motor Type A: Single ShaftM: With Electromagnetic Brake

⑨

Power Supply Input Built-in Controller TypeA: Single-Phase 100-120 VACC: Single-Phase 200-240 VACK: 24 VDC

Pulse Input TypeA: Single-Phase 100-115 VACC: Single-Phase 200-230 VACS: Three-Phase 200-230 VACK: 24 VDC

⑩ Driver Type D: Built-in Controller TypeBLANK: Pulse Input Type

⑪ Connection Cable✽ 3: 3 m (9.8 ft.) cable Included

✽Connection cables with a length of 5 m (16.4 ft.) or more are available as accessories (sold separately).AC Input ➜ Page E-140DC Input ➜ Page E-146

■Product Line

●AC Input ◇EAS4 Straight Type

Stroke✽

(mm)

Built-in Controller Type Pulse Input TypeSingle Shaft With Electromagnetic Brake Single Shaft With Electromagnetic Brake

Product Name List Price Product Name List Price Product Name List Price Product Name List Price50 EAS4□-□005-ARA ■■D-3 $1,313.00 EAS4□-□005-ARM ■■D-3 $1,542.00 EAS4□-□005-ARA ■■-3 $1,313.00 EAS4□-□005-ARM ■■-3 $1,542.00

100 EAS4□-□010-ARA ■■D-3 $1,313.00 EAS4□-□010-ARM ■■D-3 $1,542.00 EAS4□-□010-ARA ■■-3 $1,313.00 EAS4□-□010-ARM ■■-3 $1,542.00 150 EAS4□-□015-ARA ■■D-3 $1,346.00 EAS4□-□015-ARM ■■D-3 $1,575.00 EAS4□-□015-ARA ■■-3 $1,346.00 EAS4□-□015-ARM ■■-3 $1,575.00 200 EAS4□-□020-ARA ■■D-3 $1,346.00 EAS4□-□020-ARM ■■D-3 $1,575.00 EAS4□-□020-ARA ■■-3 $1,346.00 EAS4□-□020-ARM ■■-3 $1,575.00 250 EAS4□-□025-ARA ■■D-3 $1,379.00 EAS4□-□025-ARM ■■D-3 $1,608.00 EAS4□-□025-ARA ■■-3 $1,379.00 EAS4□-□025-ARM ■■-3 $1,608.00 300 EAS4□-□030-ARA ■■D-3 $1,379.00 EAS4□-□030-ARM ■■D-3 $1,608.00 EAS4□-□030-ARA ■■-3 $1,379.00 EAS4□-□030-ARM ■■-3 $1,608.00 350 EAS4□-□035-ARA ■■D-3 $1,412.00 EAS4□-□035-ARM ■■D-3 $1,640.00 EAS4□-□035-ARA ■■-3 $1,412.00 EAS4□-□035-ARM ■■-3 $1,640.00 400 EAS4□-□040-ARA ■■D-3 $1,412.00 EAS4□-□040-ARM ■■D-3 $1,640.00 EAS4□-□040-ARA ■■-3 $1,412.00 EAS4□-□040-ARM ■■-3 $1,640.00 450 EAS4□-□045-ARA ■■D-3 $1,444.00 EAS4□-□045-ARM ■■D-3 $1,673.00 EAS4□-□045-ARA ■■-3 $1,444.00 EAS4□-□045-ARM ■■-3 $1,673.00 500 EAS4□-□050-ARA ■■D-3 $1,444.00 EAS4□-□050-ARM ■■D-3 $1,673.00 EAS4□-□050-ARA ■■-3 $1,444.00 EAS4□-□050-ARM ■■-3 $1,673.00

✽ If longer strokes are required, up to 700 mm, contact technical support for assistance.

●A symbol indicating the table orientation and lead screw pitch is specified in the box □ in the product name.Either A (single-phase 100-115 (120) VAC), C (single-phase 200-230 (240) VAC) or S (three-phase 200-230 VAC: pulse input packages only) indicating power supply input is entered where the box ■■ is located within the product name.

E-27


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



◇EAS4 Reversed Motor Type

Stroke✽

(mm)


Product Name List Price Product Name List Price Product Name List Price Product Name List Price50 EAS4R(L)□-□005-ARA ■■D-3 $1,313.00 EAS4R(L)□-□005-ARM ■■D-3 $1,542.00 EAS4R(L)□-□005-ARA ■■-3 $1,313.00 EAS4R(L)□-□005-ARM ■■-3 $1,542.00

100 EAS4R(L)□-□010-ARA ■■D-3 $1,313.00 EAS4R(L)□-□010-ARM ■■D-3 $1,542.00 EAS4R(L)□-□010-ARA ■■-3 $1,313.00 EAS4R(L)□-□010-ARM ■■-3 $1,542.00 150 EAS4R(L)□-□015-ARA ■■D-3 $1,346.00 EAS4R(L)□-□015-ARM ■■D-3 $1,575.00 EAS4R(L)□-□015-ARA ■■-3 $1,346.00 EAS4R(L)□-□015-ARM ■■-3 $1,575.00 200 EAS4R(L)□-□020-ARA ■■D-3 $1,346.00 EAS4R(L)□-□020-ARM ■■D-3 $1,575.00 EAS4R(L)□-□020-ARA ■■-3 $1,346.00 EAS4R(L)□-□020-ARM ■■-3 $1,575.00 250 EAS4R(L)□-□025-ARA ■■D-3 $1,379.00 EAS4R(L)□-□025-ARM ■■D-3 $1,608.00 EAS4R(L)□-□025-ARA ■■-3 $1,379.00 EAS4R(L)□-□025-ARM ■■-3 $1,608.00 300 EAS4R(L)□-□030-ARA ■■D-3 $1,379.00 EAS4R(L)□-□030-ARM ■■D-3 $1,608.00 EAS4R(L)□-□030-ARA ■■-3 $1,379.00 EAS4R(L)□-□030-ARM ■■-3 $1,608.00 350 EAS4R(L)□-□035-ARA ■■D-3 $1,412.00 EAS4R(L)□-□035-ARM ■■D-3 $1,640.00 EAS4R(L)□-□035-ARA ■■-3 $1,412.00 EAS4R(L)□-□035-ARM ■■-3 $1,640.00 400 EAS4R(L)□-□040-ARA ■■D-3 $1,412.00 EAS4R(L)□-□040-ARM ■■D-3 $1,640.00 EAS4R(L)□-□040-ARA ■■-3 $1,412.00 EAS4R(L)□-□040-ARM ■■-3 $1,640.00 450 EAS4R(L)□-□045-ARA ■■D-3 $1,444.00 EAS4R(L)□-□045-ARM ■■D-3 $1,673.00 EAS4R(L)□-□045-ARA ■■-3 $1,444.00 EAS4R(L)□-□045-ARM ■■-3 $1,673.00 500 EAS4R(L)□-□050-ARA ■■D-3 $1,444.00 EAS4R(L)□-□050-ARM ■■D-3 $1,673.00 EAS4R(L)□-□050-ARA ■■-3 $1,444.00 EAS4R(L)□-□050-ARM ■■-3 $1,673.00


◇EAS6 Straight Type

Stroke✽

(mm)


Product Name List Price Product Name List Price Product Name List Price Product Name List Price50 EAS6□-□005-ARA ■■D-3 $1,596.00 EAS6□-□005-ARM ■■D-3 $1,891.00 EAS6□-□005-ARA ■■-3 $1,596.00 EAS6□-□005-ARM ■■-3 $1,891.00

100 EAS6□-□010-ARA ■■D-3 $1,596.00 EAS6□-□010-ARM ■■D-3 $1,891.00 EAS6□-□010-ARA ■■-3 $1,596.00 EAS6□-□010-ARM ■■-3 $1,891.00 150 EAS6□-□015-ARA ■■D-3 $1,629.00 EAS6□-□015-ARM ■■D-3 $1,923.00 EAS6□-□015-ARA ■■-3 $1,629.00 EAS6□-□015-ARM ■■-3 $1,923.00 200 EAS6□-□020-ARA ■■D-3 $1,629.00 EAS6□-□020-ARM ■■D-3 $1,923.00 EAS6□-□020-ARA ■■-3 $1,629.00 EAS6□-□020-ARM ■■-3 $1,923.00 250 EAS6□-□025-ARA ■■D-3 $1,662.00 EAS6□-□025-ARM ■■D-3 $1,956.00 EAS6□-□025-ARA ■■-3 $1,662.00 EAS6□-□025-ARM ■■-3 $1,956.00 300 EAS6□-□030-ARA ■■D-3 $1,662.00 EAS6□-□030-ARM ■■D-3 $1,956.00 EAS6□-□030-ARA ■■-3 $1,662.00 EAS6□-□030-ARM ■■-3 $1,956.00 350 EAS6□-□035-ARA ■■D-3 $1,694.00 EAS6□-□035-ARM ■■D-3 $1,989.00 EAS6□-□035-ARA ■■-3 $1,694.00 EAS6□-□035-ARM ■■-3 $1,989.00 400 EAS6□-□040-ARA ■■D-3 $1,694.00 EAS6□-□040-ARM ■■D-3 $1,989.00 EAS6□-□040-ARA ■■-3 $1,694.00 EAS6□-□040-ARM ■■-3 $1,989.00 450 EAS6□-□045-ARA ■■D-3 $1,727.00 EAS6□-□045-ARM ■■D-3 $2,021.00 EAS6□-□045-ARA ■■-3 $1,727.00 EAS6□-□045-ARM ■■-3 $2,021.00 500 EAS6□-□050-ARA ■■D-3 $1,727.00 EAS6□-□050-ARM ■■D-3 $2,021.00 EAS6□-□050-ARA ■■-3 $1,727.00 EAS6□-□050-ARM ■■-3 $2,021.00



Stroke✽

(mm)


Product Name List Price Product Name List Price Product Name List Price Product Name List Price50 EAS6R(L)□-□005-ARA ■■D-3 $1,596.00 EAS6R(L)□-□005-ARM ■■D-3 $1,891.00 EAS6R(L)□-□005-ARA ■■-3 $1,596.00 EAS6R(L)□-□005-ARM ■■-3 $1,891.00 100 EAS6R(L)□-□010-ARA ■■D-3 $1,596.00 EAS6R(L)□-□010-ARM ■■D-3 $1,891.00 EAS6R(L)□-□010-ARA ■■-3 $1,596.00 EAS6R(L)□-□010-ARM ■■-3 $1,891.00 150 EAS6R(L)□-□015-ARA ■■D-3 $1,629.00 EAS6R(L)□-□015-ARM ■■D-3 $1,923.00 EAS6R(L)□-□015-ARA ■■-3 $1,629.00 EAS6R(L)□-□015-ARM ■■-3 $1,923.00 200 EAS6R(L)□-□020-ARA ■■D-3 $1,629.00 EAS6R(L)□-□020-ARM ■■D-3 $1,923.00 EAS6R(L)□-□020-ARA ■■-3 $1,629.00 EAS6R(L)□-□020-ARM ■■-3 $1,923.00 250 EAS6R(L)□-□025-ARA ■■D-3 $1,662.00 EAS6R(L)□-□025-ARM ■■D-3 $1,956.00 EAS6R(L)□-□025-ARA ■■-3 $1,662.00 EAS6R(L)□-□025-ARM ■■-3 $1,956.00 300 EAS6R(L)□-□030-ARA ■■D-3 $1,662.00 EAS6R(L)□-□030-ARM ■■D-3 $1,956.00 EAS6R(L)□-□030-ARA ■■-3 $1,662.00 EAS6R(L)□-□030-ARM ■■-3 $1,956.00 350 EAS6R(L)□-□035-ARA ■■D-3 $1,694.00 EAS6R(L)□-□035-ARM ■■D-3 $1,989.00 EAS6R(L)□-□035-ARA ■■-3 $1,694.00 EAS6R(L)□-□035-ARM ■■-3 $1,989.00 400 EAS6R(L)□-□040-ARA ■■D-3 $1,694.00 EAS6R(L)□-□040-ARM ■■D-3 $1,989.00 EAS6R(L)□-□040-ARA ■■-3 $1,694.00 EAS6R(L)□-□040-ARM ■■-3 $1,989.00 450 EAS6R(L)□-□045-ARA ■■D-3 $1,727.00 EAS6R(L)□-□045-ARM ■■D-3 $2,021.00 EAS6R(L)□-□045-ARA ■■-3 $1,727.00 EAS6R(L)□-□045-ARM ■■-3 $2,021.00 500 EAS6R(L)□-□050-ARA ■■D-3 $1,727.00 EAS6R(L)□-□050-ARM ■■D-3 $2,021.00 EAS6R(L)□-□050-ARA ■■-3 $1,727.00 EAS6R(L)□-□050-ARM ■■-3 $2,021.00


●A symbol indicating the table orientation and lead screw pitch is specified in the box □ in the product name.Either A (single-phase 100-115 (120) VAC), C (single-phase 200-230 (240) VAC) or S (three-phase 200-230 VAC: pulse input packages only) indicating power supply input is entered where the box ■■ is located within the product name.

E-28





●DC Input ◇EAS4 Straight Type

Stroke✽

(mm)


Product Name List Price Product Name List Price Product Name List Price Product Name List Price50 EAS4□-□005-ARAKD-3 $1,089.00 EAS4□-□005-ARMKD-3 $1,318.00 EAS4□-□005-ARAK-3 $1,039.00 EAS4□-□005-ARMK-3 $1,268.00

100 EAS4□-□010-ARAKD-3 $1,089.00 EAS4□-□010-ARMKD-3 $1,318.00 EAS4□-□010-ARAK-3 $1,039.00 EAS4□-□010-ARMK-3 $1,268.00 150 EAS4□-□015-ARAKD-3 $1,121.00 EAS4□-□015-ARMKD-3 $1,350.00 EAS4□-□015-ARAK-3 $1,071.00 EAS4□-□015-ARMK-3 $1,300.00 200 EAS4□-□020-ARAKD-3 $1,121.00 EAS4□-□020-ARMKD-3 $1,350.00 EAS4□-□020-ARAK-3 $1,071.00 EAS4□-□020-ARMK-3 $1,300.00 250 EAS4□-□025-ARAKD-3 $1,154.00 EAS4□-□025-ARMKD-3 $1,383.00 EAS4□-□025-ARAK-3 $1,104.00 EAS4□-□025-ARMK-3 $1,333.00 300 EAS4□-□030-ARAKD-3 $1,154.00 EAS4□-□030-ARMKD-3 $1,383.00 EAS4□-□030-ARAK-3 $1,104.00 EAS4□-□030-ARMK-3 $1,333.00 350 EAS4□-□035-ARAKD-3 $1,187.00 EAS4□-□035-ARMKD-3 $1,416.00 EAS4□-□035-ARAK-3 $1,137.00 EAS4□-□035-ARMK-3 $1,366.00 400 EAS4□-□040-ARAKD-3 $1,187.00 EAS4□-□040-ARMKD-3 $1,416.00 EAS4□-□040-ARAK-3 $1,137.00 EAS4□-□040-ARMK-3 $1,366.00 450 EAS4□-□045-ARAKD-3 $1,220.00 EAS4□-□045-ARMKD-3 $1,448.00 EAS4□-□045-ARAK-3 $1,170.00 EAS4□-□045-ARMK-3 $1,398.00 500 EAS4□-□050-ARAKD-3 $1,220.00 EAS4□-□050-ARMKD-3 $1,448.00 EAS4□-□050-ARAK-3 $1,170.00 EAS4□-□050-ARMK-3 $1,398.00



Stroke✽

(mm)


Product Name List Price Product Name List Price Product Name List Price Product Name List Price50 EAS4R(L)□-□005-ARAKD-3 $1,089.00 EAS4R(L)□-□005-ARMKD-3 $1,318.00 EAS4R(L)□-□005-ARAK-3 $1,039.00 EAS4R(L)□-□005-ARMK-3 $1,268.00 100 EAS4R(L)□-□010-ARAKD-3 $1,089.00 EAS4R(L)□-□010-ARMKD-3 $1,318.00 EAS4R(L)□-□010-ARAK-3 $1,039.00 EAS4R(L)□-□010-ARMK-3 $1,268.00 150 EAS4R(L)□-□015-ARAKD-3 $1,121.00 EAS4R(L)□-□015-ARMKD-3 $1,350.00 EAS4R(L)□-□015-ARAK-3 $1,071.00 EAS4R(L)□-□015-ARMK-3 $1,300.00 200 EAS4R(L)□-□020-ARAKD-3 $1,121.00 EAS4R(L)□-□020-ARMKD-3 $1,350.00 EAS4R(L)□-□020-ARAK-3 $1,071.00 EAS4R(L)□-□020-ARMK-3 $1,300.00 250 EAS4R(L)□-□025-ARAKD-3 $1,154.00 EAS4R(L)□-□025-ARMKD-3 $1,383.00 EAS4R(L)□-□025-ARAK-3 $1,104.00 EAS4R(L)□-□025-ARMK-3 $1,333.00 300 EAS4R(L)□-□030-ARAKD-3 $1,154.00 EAS4R(L)□-□030-ARMKD-3 $1,383.00 EAS4R(L)□-□030-ARAK-3 $1,104.00 EAS4R(L)□-□030-ARMK-3 $1,333.00 350 EAS4R(L)□-□035-ARAKD-3 $1,187.00 EAS4R(L)□-□035-ARMKD-3 $1,416.00 EAS4R(L)□-□035-ARAK-3 $1,137.00 EAS4R(L)□-□035-ARMK-3 $1,366.00 400 EAS4R(L)□-□040-ARAKD-3 $1,187.00 EAS4R(L)□-□040-ARMKD-3 $1,416.00 EAS4R(L)□-□040-ARAK-3 $1,137.00 EAS4R(L)□-□040-ARMK-3 $1,366.00 450 EAS4R(L)□-□045-ARAKD-3 $1,220.00 EAS4R(L)□-□045-ARMKD-3 $1,448.00 EAS4R(L)□-□045-ARAK-3 $1,170.00 EAS4R(L)□-□045-ARMK-3 $1,398.00 500 EAS4R(L)□-□050-ARAKD-3 $1,220.00 EAS4R(L)□-□050-ARMKD-3 $1,448.00 EAS4R(L)□-□050-ARAK-3 $1,170.00 EAS4R(L)□-□050-ARMK-3 $1,398.00


◇EAS6 Straight Type

Stroke✽

(mm)


Product Name List Price Product Name List Price Product Name List Price Product Name List Price50 EAS6□-□005-ARAKD-3 $1,372.00 EAS6□-□005-ARMKD-3 $1,666.00 EAS6□-□005-ARAK-3 $1,322.00 EAS6□-□005-ARMK-3 $1,616.00

100 EAS6□-□010-ARAKD-3 $1,372.00 EAS6□-□010-ARMKD-3 $1,666.00 EAS6□-□010-ARAK-3 $1,322.00 EAS6□-□010-ARMK-3 $1,616.00 150 EAS6□-□015-ARAKD-3 $1,404.00 EAS6□-□015-ARMKD-3 $1,699.00 EAS6□-□015-ARAK-3 $1,354.00 EAS6□-□015-ARMK-3 $1,649.00 200 EAS6□-□020-ARAKD-3 $1,404.00 EAS6□-□020-ARMKD-3 $1,699.00 EAS6□-□020-ARAK-3 $1,354.00 EAS6□-□020-ARMK-3 $1,649.00 250 EAS6□-□025-ARAKD-3 $1,437.00 EAS6□-□025-ARMKD-3 $1,731.00 EAS6□-□025-ARAK-3 $1,387.00 EAS6□-□025-ARMK-3 $1,681.00 300 EAS6□-□030-ARAKD-3 $1,437.00 EAS6□-□030-ARMKD-3 $1,731.00 EAS6□-□030-ARAK-3 $1,387.00 EAS6□-□030-ARMK-3 $1,681.00 350 EAS6□-□035-ARAKD-3 $1,470.00 EAS6□-□035-ARMKD-3 $1,764.00 EAS6□-□035-ARAK-3 $1,420.00 EAS6□-□035-ARMK-3 $1,714.00 400 EAS6□-□040-ARAKD-3 $1,470.00 EAS6□-□040-ARMKD-3 $1,764.00 EAS6□-□040-ARAK-3 $1,420.00 EAS6□-□040-ARMK-3 $1,714.00 450 EAS6□-□045-ARAKD-3 $1,502.00 EAS6□-□045-ARMKD-3 $1,797.00 EAS6□-□045-ARAK-3 $1,452.00 EAS6□-□045-ARMK-3 $1,747.00 500 EAS6□-□050-ARAKD-3 $1,502.00 EAS6□-□050-ARMKD-3 $1,797.00 EAS6□-□050-ARAK-3 $1,452.00 EAS6□-□050-ARMK-3 $1,747.00



Stroke✽

(mm)


Product Name List Price Product Name List Price Product Name List Price Product Name List Price50 EAS6R(L)□-□005-ARAKD-3 $1,372.00 EAS6R(L)□-□005-ARMKD-3 $1,666.00 EAS6R(L)□-□005-ARAK-3 $1,322.00 EAS6R(L)□-□005-ARMK-3 $1,616.00

100 EAS6R(L)□-□010-ARAKD-3 $1,372.00 EAS6R(L)□-□010-ARMKD-3 $1,666.00 EAS6R(L)□-□010-ARAK-3 $1,322.00 EAS6R(L)□-□010-ARMK-3 $1,616.00 150 EAS6R(L)□-□015-ARAKD-3 $1,404.00 EAS6R(L)□-□015-ARMKD-3 $1,699.00 EAS6R(L)□-□015-ARAK-3 $1,354.00 EAS6R(L)□-□015-ARMK-3 $1,649.00 200 EAS6R(L)□-□020-ARAKD-3 $1,404.00 EAS6R(L)□-□020-ARMKD-3 $1,699.00 EAS6R(L)□-□020-ARAK-3 $1,354.00 EAS6R(L)□-□020-ARMK-3 $1,649.00 250 EAS6R(L)□-□025-ARAKD-3 $1,437.00 EAS6R(L)□-□025-ARMKD-3 $1,731.00 EAS6R(L)□-□025-ARAK-3 $1,387.00 EAS6R(L)□-□025-ARMK-3 $1,681.00 300 EAS6R(L)□-□030-ARAKD-3 $1,437.00 EAS6R(L)□-□030-ARMKD-3 $1,731.00 EAS6R(L)□-□030-ARAK-3 $1,387.00 EAS6R(L)□-□030-ARMK-3 $1,681.00 350 EAS6R(L)□-□035-ARAKD-3 $1,470.00 EAS6R(L)□-□035-ARMKD-3 $1,764.00 EAS6R(L)□-□035-ARAK-3 $1,420.00 EAS6R(L)□-□035-ARMK-3 $1,714.00 400 EAS6R(L)□-□040-ARAKD-3 $1,470.00 EAS6R(L)□-□040-ARMKD-3 $1,764.00 EAS6R(L)□-□040-ARAK-3 $1,420.00 EAS6R(L)□-□040-ARMK-3 $1,714.00 450 EAS6R(L)□-□045-ARAKD-3 $1,502.00 EAS6R(L)□-□045-ARMKD-3 $1,797.00 EAS6R(L)□-□045-ARAK-3 $1,452.00 EAS6R(L)□-□045-ARMK-3 $1,747.00 500 EAS6R(L)□-□050-ARAKD-3 $1,502.00 EAS6R(L)□-□050-ARMKD-3 $1,797.00 EAS6R(L)□-□050-ARAK-3 $1,452.00 EAS6R(L)□-□050-ARMK-3 $1,747.00


●A symbol indicating the table orientation and lead screw pitch is specified in the box □ in the product name.

E-29


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



■General Specifications

●Motor (AR Series) Specifications AC Input : DC Input : AC Input DC Input

Thermal Class 130 (B)✽1

Insulation ResistanceThe measured value is 100 MΩ or more when a 500 VDC megger is applied between the following locations:

· Between the case and motor/sensor windings · Between the case and electromagnetic brake windings

Dielectric StrengthNo abnormality is found with the following application for 1 minute:

· Between the case and motor sensor windings 1.5 kVAC, 50 Hz or 60 Hz · Case - Electromagnetic Brake Windings 1.5 kVAC, 50 Hz or 60 Hz

No abnormality is found with the following application for 1 minute: · Between the case and motor sensor windings 1.0 kVAC, 50 Hz or 60 Hz · Case - Electromagnetic Brake Windings 1.0 kVAC, 50 Hz or 60 Hz

Operating Environment (In operation)

Ambient Temperature 0∼+50˚C (+32∼+122˚F) (non-freezing)✽2

Ambient Humidity 85% or less (non-condensing)Atmosphere Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids.

Degree of Protection✽3 IP65 (Excluding motor connector) IP20

✽1 The DC input is certified as compliant with UL Standards 105 (A).

✽2 0∼+40˚C (+32∼+104˚F) for the electric linear slide.

✽3 Motor only.Note

●Do not perform the insulation resistance test and the insulation pressure resistance test if the electric Linear slide (motor) and driver are connected.

●Electromagnetic Brake SpecificationItem EAS4 EAS6

Electromagnetic Brake✽1 Power Supply Input 24 VDC ±5%✽2, 0.08 A or more 24 VDC ±5%✽2, 0.25 A or more

✽1 For the pulse input type, a separate power supply for the electromagnetic brake is also required.

✽2 If the wiring distance between the motor and driver is extended to 20 m (65.6 ft.) or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.

●Driver Specifications AR Series AC Input ➜ Page A-44 DC Input ➜ Page A-165

E-30





EAS4: Width 58.4 mm × Height 60 mm Straight Type AC Input

Maximum Transportable Mass: Horizontal 30 kg/Vertical 14 kgMaximum Transportable Mass: Horizontal 30 kg/Vertical 14 kg

Stroke: 50 to 500 mm (50 mm increments)Stroke: 50 to 500 mm (50 mm increments)





[N]Push Force

[N]Holding Force

[N]Maximum Speed

[mm/s]Horizontal VerticalEAS4□-D□□□-ARA ■■ ■■-3

12 ∼15−

∼70 100 70 800EAS4□-D□□□-ARM ■■ ■■-3 ∼7EAS4□-E□□□-ARA ■■ ■■-3

6 ∼30−

∼140 200 140 400EAS4□-E□□□-ARM ■■ ■■-3 ∼14

●A symbol or number will be entered in place of the □ ■■ in the product name. For details, please refer to "■Product Number" on page E-26. ●For reading the specifications table and notes, refer to "How to Read Specifications Table" on page E-23.

■Positioning Distance – Positioning Time

The positioning time (reference) can be checked from the positioning distance. A reference value for the positioning time can be calculated by multiplying the positioning time calculated from the graph with the positioning time coefficient for the applicable stroke.Refer to page E-45 for operating speed and acceleration.

●12 mm Lead Screw Pitch ◇Horizontal Direction Installation

0 kg7.5 kg15 kg

1.2

1.0

0.8

0.6

0.4

0.2

00 100 200 300 400 500

Posi

tioni

ng T

ime

[s]


Load Mass

◇Vertical Direction Installation

0 kg3.5 kg

7 kg

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

Posi

tioni

ng T

ime

[s]


Load Mass


100 200 300 400 500

2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.20

0 kg15 kg30 kg

0

Posi

tioni

ng T

ime

[s]


Load Mass

◇Vertical Direction Installation3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg7 kg

14 kg

Posi

tioni

ng T

ime

[s]


Load Mass

Note ●The positioning time in the graph does not include the settling time. Use a settling time of 0.15 s or less as a reference. (Settling time is adjustable by the velocity filter function.) ●The starting speed should be 6 mm/s or less.

■Operating Speed – Transportable Mass

●During Horizontal Installation (Acceleration of 3 m/s2)

0

10

15

20

25

30

5

35

0 700 900800600500400300200100Operating Speed [mm/s]

Load

Mas

s [k

g]

Lead Screw Pitch: 12 mmLead Screw Pitch: 6 mm

●During Vertical Installation (Acceleration of 2 m/s2)

0

4

6

8

10

14

12

2

16


Load

Mas

s [k

g]


■Dimensions

●Electric Linear Slides➜ Pages E-36, E-38

●Driver ➜ Page A-61

■Connection and Operation

●Built-in Controller Type ➜ Page A-62

●Pulse Input Type ➜ Page A-67

E-31


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



EAS4: Width 58.4 mm × Height 60 mm Reversed Motor Type AC Input

Maximum Transportable Mass: Horizontal 30 kg/Vertical 12.5 kgMaximum Transportable Mass: Horizontal 30 kg/Vertical 12.5 kg






[N]Push Force

[N]Holding Force

[N]Maximum Speed

[mm/s]Horizontal VerticalEAS4□□-D□□□-ARA ■■ ■■-3

12 ∼15−

∼70 100 70 800EAS4□□-D□□□-ARM ■■ ■■-3 ∼7EAS4□□-E□□□-ARA ■■ ■■-3

6 ∼30−

∼125 200 125 400EAS4□□-E□□□-ARM ■■ ■■-3 ∼12.5

●A symbol or number will be entered in place of the □ ■■ in the product name. For details, please refer to "■Product Number" on page E-26. ●For reading the specifications table and notes, refer to "How to Read Specifications Table" on page E-23.


The positioning time (reference) can be checked from the positioning distance. A reference value for the positioning time can be calculated by multiplying the positioning time calculated from the graph with the positioning time coefficient for the applicable stroke.Refer to pages E-45 and E-46 for operating speed and acceleration.


0 kg7.5 kg15 kg

1.2

1.0

0.8

0.6

0.4

0.2

00 100 200 300 400 500

Posi

tioni

ng T

ime

[s]


Load Mass


0 kg3.5 kg

7 kg

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

Posi

tioni

ng T

ime

[s]


Load Mass


100 200 300 400 500

2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.20

0 kg15 kg30 kg

0

Posi

tioni

ng T

ime

[s]


Load Mass


0 100 200 300 400 500

3.0

2.5

2.0

1.5

1.0

0.5

0

0 kg6.3 kg

12.5 kg


Posi

tioni

ng T

ime

[s]

Load Mass




0

10

15

20

25

30

5

35


Load

Mas

s [k

g]



0

4

6

8

10

14

12

2

16


Load

Mas

s [k

g]


■Dimensions






E-32





EAS4: Width 58.4 mm × Height 60 mm Straight Type 24 VDC Input







[N]Push Force

[N]Holding Force

[N]Maximum Speed

[mm/s]Horizontal VerticalEAS4□-D□□□-ARAK ■■-3

12 ∼15−

∼70 100 70 600EAS4□-D□□□-ARMK ■■-3 ∼7EAS4□-E□□□-ARAK ■■-3

6 ∼30−

∼140 200 140 300EAS4□-E□□□-ARMK ■■-3 ∼14

●A symbol or number will be entered in place of the □■■ in the product name. For details, please refer to "■Product Number" on page E-26. ●For reading the specifications table and notes, refer to "How to Read Specifications Table" on page E-23.




2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.20

0 100 200 300 400 500

0 kg7.5 kg15 kg


Posi

tioni

ng T

ime

[s]

Load Mass


0 kg3.5 kg

7 kg

5.0

4.0

3.0

2.0

1.0

00 100 200 300 400 500Positioning Distance [mm]

Posi

tioni

ng T

ime

[s]

Load Mass


3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg15 kg30 kg


Load Mass

Posi

tioni

ng T

ime

[s]


8.0

6.0

4.0

2.0

00 100 200 300 400 500

0 kg6.3 kg

12.5 kg

Posi

tioni

ng T

ime

[s]


Load Mass




0

10

15

20

25

30

5

35

0 700600500400300200100Operating Speed [mm/s]

Load

Mas

s [k

g]



0

4

6

8

10

14

12

2

16


Load

Mas

s [k

g]


■Dimensions






E-33


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



EAS4: Width 58.4 mm × Height 60 mm Reversed Motor Type 24 VDC Input

Maximum Transportable Mass: Horizontal 30 kg/Vertical 12.5 kgMaximum Transportable Mass: Horizontal 30 kg/Vertical 12.5 kg






[N]Push Force

[N]Holding Force

[N]Maximum Speed

[mm/s]Horizontal VerticalEAS4□□-D□□□-ARAK ■■-3

12 ∼15−

∼70 100 70 600EAS4□□-D□□□-ARMK ■■-3 ∼7EAS4□□-E□□□-ARAK ■■-3

6 ∼30−

∼125 200 125 300EAS4□□-E□□□-ARMK ■■-3 ∼12.5

●A symbol or number will be entered in place of the □■■ in the product name. For details, please refer to "■Product Number" on page E-26. ●For reading the specifications table and notes, refer to "How to Read Specifications Table" on page E-23.




2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.20

0 100 200 300 400 500

0 kg7.5 kg15 kg


Posi

tioni

ng T

ime

[s]

Load Mass


0 kg3.5 kg

7 kg

5.0

4.0

3.0

2.0

1.0


Posi

tioni

ng T

ime

[s]

Load Mass


3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg15 kg30 kg


Load Mass

Posi

tioni

ng T

ime

[s]


8.0

6.0

4.0

2.0

00 100 200 300 400 500

0 kg6.3 kg

12.5 kg

Posi

tioni

ng T

ime

[s]


Load Mass




0

10

15

20

25

30

5

35


Load

Mas

s [k

g]



0

4

6

8

10

14

12

2

16


Load

Mas

s [k

g]


■Dimensions






E-34





Straight TypeEAS6: Width 75.4 mm × Height 83 mm Reversed Motor Type

AC Input







[N]Push Force

[N]Holding Force

[N]Maximum Speed

[mm/s]Horizontal VerticalEAS6□□-D□□□-ARA ■■ ■■-3

12 ∼30−

∼200 400 200 800EAS6□□-D□□□-ARM ■■ ■■-3 ∼15EAS6□□-E□□□-ARA ■■ ■■-3

6 ∼60− ∼400

(∼360)500

400(360)

400EAS6□□-E□□□-ARM ■■ ■■-3 ∼30

●A symbol or number will be entered in place of the □■■ in the product name. For details, please refer to "■Product Number" on page E-26. ●The parentheses ( ) indicate specifications for the Reversed Motor Type. ●For reading the specifications table and notes, refer to "How to Read Specifications Table" on page E-23.




0 100 200 300 400 500

0 kg15 kg30 kg

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

0


Posi

tioni

ng T

ime

[s]

Load Mass


3.5

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg7.5 kg15 kg


Posi

tioni

ng T

ime

[s]

Load Mass


0 100 200 300 400 5000

2.5

2.0

1.5

1.0

0.5

0 kg30 kg60 kg

Load Mass


Posi

tioni

ng T

ime

[s]


3.5

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg15 kg30 kg


Posi

tioni

ng T

ime

[s]

Load Mass




0

20

30

40

50

60

10

70


Load

Mas

s [k

g]



0

10

15

20

25

30

5

35


Load

Mas

s [k

g]


■Dimensions

●Electric Linear Slides➜ Pages E-40∼E-43





E-35


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



Straight TypeEAS6: Width 75.4 mm × Height 83 mm Reversed Motor Type 24 VDC Input







[N]Push Force

[N]Holding Force

[N]Maximum Speed

[mm/s]Horizontal VerticalEAS6□□-D□□□-ARAK ■■-3

12 ∼30−

∼200 400 200 600EAS6□□-D□□□-ARMK ■■-3 ∼15EAS6□□-E□□□-ARAK ■■-3

6 ∼60− ∼400

(∼360)500

400(360)

300EAS6□□-E□□□-ARMK ■■-3 ∼30

●A symbol or number will be entered in place of the □■■ in the product name. For details, please refer to "■Product Number" on page E-26. ●The parentheses ( ) indicate specifications for the Reversed Motor Type. ●For reading the specifications table and notes, refer to "How to Read Specifications Table" on page E-23.

■Positioning Distance – Positioning time


●12 mm Lead Screw Pitch ◇Horizontal Direction Installation2.5

2.0

1.5

1.0

0.5

0 100 200 300 400 500

0 kg15 kg30 kg

0

Posi

tioni

ng T

ime

[s]


Load Mass


8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

00 100 200 300 400 500

0 kg7.5 kg15 kg


Posi

tioni

ng T

ime

[s]

Load Mass

●6 mm Lead Screw Pitch ◇Horizontal Direction Installation4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg30 kg60 kg


Posi

tioni

ng T

ime

[s]

Load Mass


9.0

10.0

8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0 100 200 300 400 5000

0 kg15 kg30 kg


Load Mass

Posi

tioni

ng T

ime

[s]


■Operating Speed – Load Mass


0

20

30

40

50

60

10

70


Load

Mas

s [k

g]



0

10

15

20

25

30

5

35


Load

Mas

s [k

g]


■Dimensions

●Electric Linear Slides➜ Pages E-40∼E-43





E-36





■Dimensions Unit = mm

●Electric Linear Slides ◇EAS4 Straight Type X-Table

+0.06

+0.012

+0.012

✽1

17.6

34.5

400

28.512

1342

400

5557-02R-210 (Molex)

18.5

16 5557-10R-210 (Molex)

50

88 6456

3

5

617

32140.397.6 ✽3

68 ✽3

13.5

42

(100)n×1005012.2

4.5 1.233.2

2.54.5

1

5.7

3.2

456.

76.

7

65

A

720

.531

0.5

15

6057

11.5 100±0.02

43025-0200 (Molex)43025-1000 (Molex)

✽AC Input

4×M4×8 Deep✽DC Input

ϕ4 0 ×4 Deep

Electromagnetic Brake Cable ϕ6

Connector Cover

Connector CoverMotor Cable ϕ8

Protective Earth Terminal M4


Mechanical Limit Position✽2

Stroke+257.8±3✽3

Stroke+228.2±3✽3Mechanical Limit Position✽2

Stroke+3 (Positioning Allowable Range)Home✽4

2×ϕ6+0.04×5 Deep

4×M2.5×5 Deep (Same on opposite side)

Detail of "A"

Stroke+135.4

4 0 ×4 Deep

(n+3)×M5×6 Deep

✽1 The motor cable outlet direction can be changed in 90˚ intervals in four directions.

✽2 During the pushing return-to-home operation, the table moves to mechanical limit position.

✽3 For DC input, total length shortens by 0.5 mm for single shaft, and 0.6 mm for the electromagnetic brake type.

✽4 When using an accessory sensor, the home position differs.

Electric Linear Slides Product Name: EASM4XD□□□ARAK, EASM4XD□□□ARAC, EASM4XE□□□ARAK, EASM4XE□□□ARAC (Single shaft) EASM4XD□□□ARMK, EASM4XD□□□ARMC, EASM4XE□□□ARMK, EASM4XE□□□ARMC (With electromagnetic brake)

Number Specifiable in the Box □ within the Electric Linear Slide Product Name005 010 015 020 025 030 035 040 045 050

Stroke✽ 50 100 150 200 250 300 350 400 450 500

Mass [kg]Single Shaft 1.9 2.0 2.2 2.3 2.5 2.6 2.8 3.0 3.1 3.3With Electromagnetic Brake 2.0 2.1 2.3 2.4 2.6 2.7 2.9 3.1 3.2 3.4


Hole Coefficient (n)

Stroke[mm]

n

50∼100 1150∼200 2250∼300 3350∼400 4450∼500 5

●For CAD data, please download from the Oriental Motor website.http://www.orientalmotor.com

E-37


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



◇EAS4 Reversed Motor Type (Left side) X-Table

+0.06

43025-0200 (Molex)

43025-1000 (Molex)

456.

76.

7

5557-02R-210 (Molex)5557-10R-210 (Molex)

18.5

16

400

28.5 12

4213

400

17.6

34.5

508

8

6456

2.54.5

1

5.7

3.2

✽1

A

720

.531

0.5

15

33

652123.1

5

617

6057

114.813.5

42

11.5 100±0.02

(100)4.5n×1005012.2

1.233.2

97.6 ✽368 ✽3


2×ϕ6+0.04×5 Deep

Stroke+135.4

4×M2.5×5 Deep (Same on opposite side)

Stroke+3 (Positioning Allowable Range)

Stroke+143 ±3


Home✽4Mechanical Limit Position✽2

4×M4×8 Deep+0.012

ϕ4 0 ×4 Deep


✽AC Input


Connector Cover


✽DC Input

Detail of "A"(n+3)×M5×6 Deep

+0.0124 0 ×4 Deep

✽1 The motor cable outlet direction can be changed in 90˚ intervals in three directions.



✽4 When using an accessory sensor, the home position differs. ●The above figure is an outline drawing of the motor installation direction for the type left side mounted. For the type right side mounted, the motor is located on the opposite side if the linear slide is centered.

Electric Linear Slides Product Name: EASM4LXD□□□ARAK, EASM4LXD□□□ARAC, EASM4LXE□□□ARAK, EASM4LXE□□□ARAC (Single shaft) EASM4LXD□□□ARMK, EASM4LXD□□□ARMC, EASM4LXE□□□ARMK, EASM4LXE□□□ARMC (With electromagnetic brake)


Stroke✽ 50 100 150 200 250 300 350 400 450 500




Stroke[mm]

n

50∼100 1150∼200 2250∼300 3350∼400 4450∼500 5


E-38





◇EAS4 Straight Type Y-Table

+0.012

+0.06

6

50

6 3630

2.54.5

1

5.7

3.2

A

720

.531

0.5

15

33

2140.397.6✽3

68✽3

13.5

42

65

6057(100)

n×1005012.24.5 1.233.2

11.5 100±0.02

43025-0200 (Molex)43025-1000 (Molex)

18.5

456.

76.

7

5557-10R-210 (Molex)

17.6

34.5

400 9179

28.512

1342

400

5557-02R-210 (Molex)

16

✽1

✽AC Input ✽DC Input

+0.012ϕ4 0 ×4 Deep

Stroke+135.4

Detail of "A"




Stroke+257.8±3✽3

Stroke+228.2±3✽3

Home✽4




Connector Cover


4×M4×8 Deep

(n+3)×M5×6 Deep

2×ϕ6+0.04×5 Deep

4 0 ×4 Deep





Electric Linear Slides Product Name: EASM4YD□□□ARAK, EASM4YD□□□ARAC, EASM4YE□□□ARAK, EASM4YE□□□ARAC (Single shaft) EASM4YD□□□ARMK, EASM4YD□□□ARMC, EASM4YE□□□ARMK, EASM4YE□□□ARMC (With electromagnetic brake)


Stroke✽ 50 100 150 200 250 300 350 400 450 500




Stroke[mm]

n

50∼100 1150∼200 2250∼300 3350∼400 4450∼500 5


E-39


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



◇EAS4 Reversed Motor Type (Left side) Y-Table

+0.012

+0.06

43025-0200 (Molex)

43025-1000 (Molex)

✽1

18.5

16

400

28.5 12

4213

400

17.6

34.5

5557-10R-210 (Molex)5557-02R-210 (Molex)

66

36309179

50

456.

76.

7

A

720

.531

0.5

15

33

652123.1

6057

114.813.5

42

2.54.5

1

5.7

3.2

11.5 100±0.02

(100)4.5n×1005012.2

1.233.2

97.6✽368✽3


Stroke+135.4

2×ϕ6+0.04×5 Deep

Detail of "A"



Stroke+143 ±3

Home✽4


ϕ4 0 ×4 Deep 4×M4×8 Deep

✽AC Input



Connector Cover

Connector CoverMotor Cableϕ8

✽DC Input

(n+3)×M5×6 Deep

+0.0124 0 ×4 Deep





Electric Linear Slides Product Name: EASM4LYD□□□ARAK, EASM4LYD□□□ARAC, EASM4LYE□□□ARAK, EASM4LYE□□□ARAC (Single shaft) EASM4LYD□□□ARMK, EASM4LYD□□□ARMC, EASM4LYE□□□ARMK, EASM4LYE□□□ARMC (With electromagnetic brake)


Stroke✽ 50 100 150 200 250 300 350 400 450 500




Stroke[mm]

n

50∼100 1150∼200 2250∼300 3350∼400 4450∼500 5


E-40





◇EAS6 Straight Type X-Table

+0.012

+0.06 2.54.5

1

5.7

3.2

4622

627.547.199.5✽3

64.5✽380

43025-0200 (Molex)43025-1000 (Molex)

12

6013

400

5557-02R-210 (Molex)

18.5

16

17.6

34.5

5557-10R-210 (Molex)

400

28.5

60

1111 8776

626.

76.

78380

18.5

60

(100)n×1005012.3

11.5 1.233.7

6

A

320.5

18.5

31

23

21 100±0.02

✽1

Stroke+300±3✽3

Stroke+265±3✽3


Stroke+3 (Positioning Allowable Range)Home✽4



+0.012ϕ4 0 ×4 Deep

✽AC Input ✽DC Input


Stroke+176

4×M2.5×5 Deep (Same for opposite side)



Connector Cover

4×M5×10 Deep

Detail of "A"

2×ϕ6+0.04×5 Deep

(n+3)×M6×9 Deep

4 0 ×4 Deep



✽3 For DC input, the total length decreases by 0.5 mm.


Electric Linear Slides Product Name: EASM6XD□□□ARAK, EASM6XD□□□ARAC, EASM6XE□□□ARAK, EASM6XE□□□ARAC (Single shaft) EASM6XD□□□ARMK, EASM6XD□□□ARMC, EASM6XE□□□ARMK, EASM6XE□□□ARMC (With electromagnetic brake)


Stroke✽ 50 100 150 200 250 300 350 400 450 500

Mass [kg]Single Shaft 3.9 4.2 4.5 4.8 5.1 5.3 5.6 5.9 6.2 6.5 With Electromagnetic Brake 4.2 4.5 4.8 5.1 5.4 5.6 5.9 6.2 6.5 6.8



Stroke[mm]

n

50∼100 1150∼200 2250∼300 3350∼400 4450∼500 5


E-41


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



◇EAS6 Reversed Motor Type (Left side) X-Table

+0.06

60

60

4

622

626.

76.

7

5557-02R-210 (Molex)17.6

34.5

12

13

400

400

28.5

18.5

16

5557-10R-210 (Molex)43025-0200 (Molex)

43025-1000 (Molex)

1111 8776

5.7

3.2

1 2.54.5

32 0.5

18.5

31

A

23

✽1

154

18.5

60

8380

68027.528.76

1.233.721 100±0.02

(100)11.55012.3 n×100

99.5✽364.5✽3


Stroke+176

4×M2.5×5 Deep (Same for opposite side)

Stroke+182.1±3

Mechanical Limit Position✽2 Home✽4

+0.012ϕ4 0 ×4 Deep 4×M5×10 Deep

✽DC Input✽AC Input

Motor Cable ϕ8Connector Cover


Detail of "A"


Connector Cover



(n+3)×M6×9 Deep

2×ϕ6+0.04×5 Deep

+0.0124 0 ×4 Deep





Electric Linear Slides Product Name: EASM6LXD□□□ARAK, EASM6LXD□□□ARAC, EASM6LXE□□□ARAK, EASM6LXE□□□ARAC (Single shaft) EASM6LXD□□□ARMK, EASM6LXD□□□ARMC, EASM6LXE□□□ARMK, EASM6LXE□□□ARMC (With electromagnetic brake)


Stroke✽ 50 100 150 200 250 300 350 400 450 500




Stroke[mm]

n

50∼100 1150∼200 2250∼300 3350∼400 4450∼500 5

●For CAD data, please download from the Oriental Motor website. http://www.orientalmotor.com

E-42





◇EAS6 Straight Type Y-Table

+0.012

+0.012

+0.06 2.54.5

1

5.7

3.2

627.547.199.5✽3

64.5✽380 6

43025-0200 (Molex)43025-1000 (Molex)

22 1313

99 4940

60

400

18.5

16

17.6

34.5

12

6013

400

28.5

5557-10R-210 (Molex)5557-02R-210 (Molex)

626.

76.

7

A

320.5

18.5

31

23

✽1

8380

18.5

60

(100)n×1005012.3

11.5 1.233.7

100±0.0221

Stroke+176





Detail of "A"

✽AC Input



Connector Cover

Stroke+300±3✽3

Stroke+265±3✽3


4×M5×10 Deep

ϕ4 0 ×4 Deep

✽DC Input

2×ϕ6+0.04×5 Deep

(n+3)×M6×9 Deep

4 0 ×4 Deep





Electric Linear Slides Product Name: EASM6YD□□□ARAK, EASM6YD□□□ARAC, EASM6YE□□□ARAK, EASM6YE□□□ARAC (Single shaft) EASM6YD□□□ARMK, EASM6YD□□□ARMC, EASM6YE□□□ARMK, EASM6YE□□□ARMC (With electromagnetic brake)


Stroke✽ 50 100 150 200 250 300 350 400 450 500




Stroke[mm]

n

50∼100 1150∼200 2250∼300 3350∼400 4450∼500 5


E-43


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



◇EAS6 Reversed Motor Type (Left side) Y-Table

+0.06

+0.012

43025-0200 (Molex)

43025-1000 (Molex)

154

18.5

60

68027.528.76

1.233.721 100±0.02

(100)11.55012.3 n×100

6022 1313

99 4940

60

626.

76.

7

5557-02R-210 (Molex)17.6

34.5

12

13

400

400

28.5

18.5

16

5557-10R-210 (Molex)

5.7

3.2

1 2.54.5

32 0.5

18.5

31

A

23

✽1

8380

99.5✽364.5✽3

Detail of "A"

4×M5×10 Deep


✽DC Input✽AC Input

ϕ4 0 ×4 Deep


Stroke+176

Stroke+182.1±3


Stroke+3 (Positioning Allowable Range)Mechanical Limit Position✽2

Connector Cover

Motor Cable ϕ8Connector Cover


+0.0124 0 ×4 Deep

(n+3)×M6×9 Deep

2×ϕ6+0.04×5 Deep





Electric Linear Slides Product Name: EASM6LYD□□□ARAK, EASM6LYD□□□ARAC, EASM6LYE□□□ARAK, EASM6LYE□□□ARAC (Single shaft) EASM6LYD□□□ARMK, EASM6LYD□□□ARMC, EASM6LYE□□□ARMK, EASM6LYE□□□ARMC (With electromagnetic brake)


Stroke✽ 50 100 150 200 250 300 350 400 450 500




Stroke[mm]

n

50∼100 1150∼200 2250∼300 3350∼400 4450∼500 5


E-44





●Cables for Motor (Included), Cables for Electromagnetic Brake (Included) Unit = mm (in.)

◇AC Input, Common to All Types ●Cables for Motor

Cable Type Length L m (ft.)Cable for Motor 3 (9.8)

●Cables for Electromagnetic Brake (Electromagnetic brake type only)Cable Type Length L m (ft.)

Cable for Electromagnetic Brake 3 (9.8)

◇DC Input, Common to All Types ●Cables for Motor

Cable Type Length L m (ft.)Cable for Motor 3 (9.8)

●Cables for Electromagnetic Brake (Electromagnetic brake type only)Cable Type Length L m (ft.)

Cable for Electromagnetic Brake 3 (9.8)

5557-10R-210(Molex)

12 (0.47)

22.2

( 0.87)

14.5 (0.57)

37.5

( 1.48)

11.6 (0.46)19.6(0.77)

20.6 (0.81)

Motor Side Driver Side

30 ( 1

.18)

24.3

( 0.96)

23.9 (0.94)ϕ8 (ϕ0.31)

L

75 (2.95)

5559-10P-210(Molex) Connector Cover

13.5 (0.53)

19(0.75)

11.8

( 0.46) 80±10

(3.15±0.39)24(0.94) L

ϕ4.1 (ϕ0.16)

Driver SideMotor Side

Stick Terminal : AI0.5-8WH(PHOENIX CONTACT)

Connector Cover

76 (2.99)

21.5

( 0.85)

5559-02P-210(Molex)

ϕ8 (ϕ0.31)

43020-1000 (Molex) 43025-1000 (Molex)

15.9

(0.63)

10.9 (0.43)8.3 (0.33)7.9 (0.31)

22.3

(0.88)

16.5

(0.65)

L14 (0.55)16.9 (0.67)

Motor Side Driver Side

10.3 (0.41)

8.8

(0.35)

80±10

(3.15±0.39)16.9 (0.67)

L

Driver SideMotor Side ϕ4.1 (ϕ0.16)43020-0200

(Molex)

E-45


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



■Operating Data under Typical Conditions

●EAS4: Straight Type/Reversed Motor Type, AC Input, Lead Screw Pitch: 12 mm ◇Horizontal Direction Installation ◇Vertical Direction Installation

●Positioning Distance – Positioning time ●Positioning Distance – Positioning Time

0 kg7.5 kg15 kg

1.2

1.0

0.8

0.6

0.4

0.2

00 100 200 300 400 500

Posi

tioni

ng T

ime

[s]


Load Mass0 kg

3.5 kg7 kg

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

Posi

tioni

ng T

ime

[s]


Load Mass

●Positioning Distance – Operating Speed ●Positioning Distance – Operating Speed ◇Max. Speed: 800 [mm/s]900

700

800

600

500

400

200

100

300

0

90

70

80

60

50

40

30

10

20

0

0 kg7.5 kg15 kg

100 200 300 400 5000Positioning Distance [mm]

Oper

atin

g Sp

eed

[mm

/s]

Oper

atin

g Sp

eed

[kHz

]

Load Mass

900

700

800

600

500

400

200

100

300

0

90

70

80

60

50

40

30

10

20

0

0 kg3.5 kg

7 kg

100 200 300 400 5000

Oper

atin

g Sp

eed

[mm

/s]

Oper

atin

g Sp

eed

[kHz

]


Load Mass

●Positioning Distance – Acceleration ●Positioning Distance – Acceleration

2022

181614

2

1210

864

0

0.45

0.710.630.56

0.5

0.831.0

1.251.67

5.02.5

0

0 kg7.5 kg15 kg

100 200 300 400 5000Positioning Distance [mm]

Load Mass

Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

2022

181614

2

1210864

0

0.45

0.710.630.560.5

0.831.0

1.251.67

5.02.5

0100 200 300 400 5000

0 kg3.5 kg

7 kg

Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]


Load Mass

●EAS4: Straight Type, AC Input, Lead Screw Pitch: 6 mm ◇Horizontal Direction Installation ◇Vertical Direction Installation

●Positioning Distance – Positioning Time ●Positioning Distance – Positioning Time

100 200 300 400 500

2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.20

0 kg15 kg30 kg

0

Posi

tioni

ng T

ime

[s]


Load Mass3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg7 kg

14 kg

Posi

tioni

ng T

ime

[s]


Load Mass

●Positioning Distance – Operating Speed ●Positioning Distance – Operating Speed ◇Max. Speed: 400 [mm/s]

100 200 300 400 5000

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg15 kg30 kg


Oper

atin

g Sp

eed

[mm

/s]

Oper

atin

g Sp

eed

[kHz

]

Load Mass

100 200 300 400 5000

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg7 kg

14 kg


Oper

atin

g Sp

eed

[mm

/s]

Oper

atin

g Sp

eed

[kHz

]

Load Mass

●Positioning Distance – Acceleration ●Positioning Distance – Acceleration20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0100 200 300 400 5000

0 kg15 kg30 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz] Load Mass

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0100 200 300 400 5000

0 kg7 kg

14 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz] Load Mass

● In the graphs above, the values for the operating speeds [kHz] and acceleration/deceleration rates [ms/kHz] are taken when the minimum traveling amount of the electric linear slide is set to 0.01 mm.

E-46





●EAS4: Reversed Motor Type, AC Input, Lead Screw Pitch: 6 mm ◇Horizontal Direction Installation ◇Vertical Direction Installation


100 200 300 400 500

2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.20

0 kg15 kg30 kg

0

Posi

tioni

ng T

ime

[s]


Load Mass

0 100 200 300 400 500

3.0

2.5

2.0

1.5

1.0

0.5

0

0 kg6.3 kg

12.5 kg


Posi

tioni

ng T

ime

[s]

Load Mass


100 200 300 400 5000

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg15 kg30 kg


Oper

atin

g Sp

eed

[mm

/s]

Oper

atin

g Sp

eed

[kHz

]

Load Mass

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg6.3 kg

12.5 kg

100 200 300 400 5000

Load MassOp

erat

ing

Spee

d [m

m/s

]

Oper

atin

g Sp

eed

[kHz

]


●Positioning Distance – Acceleration ●Positioning Distance – Acceleration20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0100 200 300 400 5000

0 kg15 kg30 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz] Load Mass

100 200 300 400 5000

0 kg6.3 kg

12.5 kg

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0


Load Mass

Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

●EAS4: Straight Type/Reversed Motor Type, 24 VDC input, Lead Screw Pitch: 12 mm ◇Horizontal Direction Installation ◇Vertical Direction Installation

●Positioning Distance – Positioning Time ●Positioning Distance – Positioning Time2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.20

0 100 200 300 400 500

0 kg7.5 kg15 kg


Posi

tioni

ng T

ime

[s]

Load Mass0 kg

3.5 kg7 kg

5.0

4.0

3.0

2.0

1.0


Posi

tioni

ng T

ime

[s]

Load Mass


0 100 200 300 400 500

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg7.5 kg15 kg


Oper

atin

g Sp

eed

[mm

/s]

Oper

atin

g Sp

eed

[kHz

]

Load Mass

100 200 300 400 5000

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg3.5 kg

7 kg


Oper

atin

g Sp

eed

[mm

/s]

Oper

atin

g Sp

eed

[kHz

] Load Mass


100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg7.5 kg15 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass

100 200 300 400 5000

0 kg3.5 kg

7 kg

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0


Load Mass

Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]


E-47


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



●EAS4: Straight Type, 24 VDC Input, Lead Screw Pitch: 6 mm ◇Horizontal Direction Installation ◇Vertical Direction Installation


2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg15 kg30 kg


Load Mass

Posi

tioni

ng T

ime

[s]

10.0

8.0

6.0

4.0

2.0

00 100 200 300 400 500

0 kg7 kg

14 kg

Posi

tioni

ng T

ime

[s]

Load Mass



0 kg15 kg30 kg

100 200 300 400 5000

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0


Load Mass

Oper

atin

g Sp

eed

[mm

/s]

Oper

atin

g Sp

eed

[kHz

]

100 200 300 400 5000

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg7 kg

14 kg


Oper

atin

g Sp

eed

[mm

/s]

Oper

atin

g Sp

eed

[kHz

]

Load Mass


100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg15 kg30 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass

100 200 300 400 5000

0 kg7 kg

14 kg

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0


Load Mass

Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

●EAS4: Reversed Motor Type, 24 VDC Input, Lead Screw Pitch: 6 mm ◇Horizontal Direction Installation ◇Vertical Direction Installation


2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg15 kg30 kg


Load Mass

Posi

tioni

ng T

ime

[s]

10.0

8.0

6.0

4.0

2.0

00 100 200 300 400 500

0 kg6.3 kg

12.5 kg

Posi

tioni

ng T

ime

[s]


Load Mass


0 kg15 kg30 kg

100 200 300 400 5000

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0


Load Mass

Oper

atin

g Sp

eed

[mm

/s]

Oper

atin

g Sp

eed

[kHz

]

100 200 300 400 5000

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg6.3 kg

12.5 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass


100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg15 kg30 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass

100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg6.3 kg

12.5 kg


Load Mass

Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]


E-48







0 100 200 300 400 500

0 kg15 kg30 kg

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

0


Posi

tioni

ng T

ime

[s]

Load Mass4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg7.5 kg15 kg


Posi

tioni

ng T

ime

[s]

Load Mass


0 100 200 300 400 500

900

800

700

600

500

400

200

100

300

0

90

70

80

60

50

40

30

10

20

0

0 kg15 kg30 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass

0 100 200 300 400 500

900

800

700

600

500

400

200

100

300

0

90

70

80

60

50

40

30

10

20

0

0 kg7.5 kg15 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass


0 kg15 kg30 kg

100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

Load Mass


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

0 kg7.5 kg15 kg

100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

Load Mass


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]



0 100 200 300 400 5000

2.5

2.0

1.5

1.0

0.5

0 kg30 kg60 kg

Load Mass


Posi

tioni

ng T

ime

[s]

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg15 kg30 kg


Posi

tioni

ng T

ime

[s]

Load Mass


0 100 200 300 400 500

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg30 kg60 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass

0 100 200 300 400 500

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg15 kg30 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass


100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg30 kg60 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass

100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg15 kg30 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass


E-49


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



●EAS6: Straight Type/Reversed Motor Type, 24 VDC Input, Lead Screw Pitch: 12 mm ◇Horizontal Direction Installation ◇Vertical Direction Installation


2.0

1.5

1.0

0.5

0 100 200 300 400 500

0 kg15 kg30 kg

0

Posi

tioni

ng T

ime

[s]


Load Mass9.0

8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

00 100 200 300 400 500

0 kg7.5 kg15 kg


Posi

tioni

ng T

ime

[s]

Load Mass


0 100 200 300 400 500

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg15 kg30 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass

0 100 200 300 400 500

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg7.5 kg15 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass


100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg15 kg30 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass

100 200 300 400 5000

20

18

16

14

2

12

10

8

6

4

0

0.5

0.71

0.63

0.56

0.83

1.0

1.25

1.67

5.0

2.5

0

0 kg7.5 kg15 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass

●EAS6: Straight Type/Reversed Motor Type, 24 VDC Input, Lead Screw Pitch: 6 mm ◇Horizontal Direction Installation ◇Vertical Direction Installation


3.5

3.0

2.5

2.0

1.5

1.0

0.5

00 100 200 300 400 500

0 kg30 kg60 kg


Posi

tioni

ng T

ime

[s]

Load Mass 9.0

10.0

8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0 100 200 300 400 5000

0 kg15 kg30 kg


Load Mass

Posi

tioni

ng T

ime

[s]

●Positioning Distance – Operating Speed ●Positioning Distance – Operating Speed ◇Max. Speed: 300 [mm/s] ● If used at an operating speed of 150 mm or more, acceleration is 2.17 m/s2 or less.

0 kg30 kg60 kg

0 100 200 300 400 500

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

Load Mass


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

0 100 200 300 400 500

700

600

500

400

200

100

300

0

70

60

50

40

30

10

20

0

0 kg15 kg30 kg


Oper

atin

g Sp

eed

[kHz

]

Oper

atin

g Sp

eed

[mm

/s]

Load Mass


100 200 300 400 5000

10

2

8

6

4

0

1.0

1.25

1.67

5.0

2.5

0

0 kg30 kg60 kg

Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]


Load Mass

100 200 300 400 5000

10

2

8

6

4

0

1.0

1.25

1.67

5.0

2.5

0

0 kg15 kg30 kg


Acce

lera

tion

[m/s

2 ]

Acce

lera

tion/

dece

lera

tion

rate

[ms/

kHz]

Load Mass


E-50





■About Use of the EAS6 (AC Input Type) for Vertical Driving

When operating EAS6✽ type electric linear slides in the vertical direction, depending on the driving conditions, an overvoltage protection alarm may be detected.In such case, refer to the operating speed-transportable mass characteristics diagram, and connect the RGB100 regeneration unit accessory (sold separately).

✽AC input X/Y type, D (12 mm lead screw pitch) / E (6 mm lead screw pitch), both straight and reversed motor types

Example of Vertical Use

Region in which the EAS6 type regeneration unit is necessary

35

25

20

15

10

5

00 100 200 300 400 500 600 900

30

700 800

Load

Mas

s [k

g]

Operating Speed [mm/s]

12 mm lead screw pitch6 mm lead screw pitchUse regeneration unit

●Regeneration UnitWhen a regeneration unit is attached to the special terminal on the driver, the regenerative power that is fed back from the motor is released as heat energy.

◇Product LineProduct Name Applicable Products List Price

RGB100 EAS Series AR Equipped (AC Input) $59.00

◇SpecificationsItem Specifications

Continuous Regenerative Power 50 WResistance Value 150 Ω

Thermostat Operating Temperature

Open: 150±7˚C (302±13˚F)Close: 145±12˚C (293±22˚F)(Normally closed)

Thermostat Electrical Rating120 VAC 4 A30 VDC 4 A(Minimum current 5 mA)

● Install the regeneration unit in the place which has the same heat radiation capability as heat radiation plate [Material: Aluminum 350 mm×350 mm (13.8 in.×13.8 in.), 3 mm (0.12 in.) thick].

E-51


Electric

Linear

Slides

Overview,

Product

Series

AREAS

AREAC

ARDG

DRL

Electric

Cylinders

Hollow

Rotary

Actuators

Accessories

CAD DataManuals



■Electric Linear Slide and Driver Combinations

The product names for electric linear slide and driver combinations are shown below.

●Built-in Controller Type ◇Straight Type

ElectromagneticBrake

Product NameElectric Linear Slide

Product Name

Driver Product Name

Not equipped

EAS4X-E□□□-ARA ■■D-3 EASM4XE□□□ARA ■■

ARD-■■D

EAS4X-D□□□-ARA ■ ■D-3 EASM4XD□□□ARA ■■EAS4Y-E□□□-ARA ■ ■D-3 EASM4YE□□□ARA ■■EAS4Y-D□□□-ARA ■ ■D-3 EASM4YD□□□ARA ■■EAS6X-E□□□-ARA ■ ■D-3 EASM6XE□□□ARA ■■EAS6X-D□□□-ARA ■ ■D-3 EASM6XD□□□ARA ■■EAS6Y-E□□□-ARA ■ ■D-3 EASM6YE□□□ARA ■■EAS6Y-D□□□-ARA ■ ■D-3 EASM6YD□□□ARA ■■

Equipped

EAS4X-E□□□-ARM ■ ■D-3 EASM4XE□□□ARM ■■EAS4X-D□□□-ARM ■ ■D-3 EASM4XD□□□ARM ■■EAS4Y-E□□□-ARM ■ ■D-3 EASM4YE□□□ARM ■■EAS4Y-D□□□-ARM ■ ■D-3 EASM4YD□□□ARM ■■EAS6X-E□□□-ARM ■ ■D-3 EASM6XE□□□ARM ■■EAS6X-D□□□-ARM ■ ■D-3 EASM6XD□□□ARM ■■EAS6Y-E□□□-ARM ■ ■D-3 EASM6YE□□□ARM ■■EAS6Y-D□□□-ARM ■ ■D-3 EASM6YD□□□ARM ■■

◇Reversed Motor Type



Product Name

Driver Product Name

Not equipped

EAS4RX-E□□□-ARA ■ ■D-3 EASM4RXE□□□ARA ■■

ARD-■■D

EAS4RX-D□□□-ARA ■ ■D-3 EASM4RXD□□□ARA ■■EAS4RY-E□□□-ARA ■ ■D-3 EASM4RYE□□□ARA ■■EAS4RY-D□□□-ARA ■ ■D-3 EASM4RYD□□□ARA ■■EAS4LX-E□□□-ARA ■ ■D-3 EASM4LXE□□□ARA ■■EAS4LX-D□□□-ARA ■ ■D-3 EASM4LXD□□□ARA ■■EAS4LY-E□□□-ARA ■ ■D-3 EASM4LYE□□□ARA ■■EAS4LY-D□□□-ARA ■ ■D-3 EASM4LYD□□□ARA ■■EAS6RX-E□□□-ARA ■ ■D-3 EASM6RXE□□□ARA ■■EAS6RX-D□□□-ARA ■ ■D-3 EASM6RXD□□□ARA ■■EAS6RY-E□□□-ARA ■ ■D-3 EASM6RYE□□□ARA ■■EAS6RY-D□□□-ARA ■ ■D-3 EASM6RYD□□□ARA ■■EAS6LX-E□□□-ARA ■ ■D-3 EASM6LXE□□□ARA ■■EAS6LX-D□□□-ARA ■ ■D-3 EASM6LXD□□□ARA ■■EAS6LY-E□□□-ARA ■ ■D-3 EASM6LYE□□□ARA ■■EAS6LY-D□□□-ARA ■ ■D-3 EASM6LYD□□□ARA ■■

Equipped

EAS4RX-E□□□-ARM ■ ■D-3 EASM4RXE□□□ARM ■■EAS4RX-D□□□-ARM ■ ■D-3 EASM4RXD□□□ARM ■■EAS4RY-E□□□-ARM ■ ■D-3 EASM4RYE□□□ARM ■■EAS4RY-D□□□-ARM ■ ■D-3 EASM4RYD□□□ARM ■■EAS4LX-E□□□-ARM ■ ■D-3 EASM4LXE□□□ARM ■■EAS4LX-D□□□-ARM ■ ■D-3 EASM4LXD□□□ARM ■■EAS4LY-E□□□-ARM ■ ■D-3 EASM4LYE□□□ARM ■■EAS4LY-D□□□-ARM ■ ■D-3 EASM4LYD□□□ARM ■■EAS6RX-E□□□-ARM ■ ■D-3 EASM6RXE□□□ARM ■■EAS6RX-D□□□-ARM ■ ■D-3 EASM6RXD□□□ARM ■■EAS6RY-E□□□-ARM ■ ■D-3 EASM6RYE□□□ARM ■■EAS6RY-D□□□-ARM ■ ■D-3 EASM6RYD□□□ARM ■■EAS6LX-E□□□-ARM ■ ■D-3 EASM6LXE□□□ARM ■■EAS6LX-D□□□-ARM ■ ■D-3 EASM6LXD□□□ARM ■■EAS6LY-E□□□-ARM ■ ■D-3 EASM6LYE□□□ARM ■■EAS6LY-D□□□-ARM ■ ■D-3 EASM6LYD□□□ARM ■■

●Pulse Input Type ◇Straight Type



Product Name

Driver Product Name

Not equipped

EAS4X-E□□□-ARA ■ ■-3 EASM4XE□□□ARA ■■

ARD-■■

EAS4X-D□□□-ARA ■ ■-3 EASM4XD□□□ARA ■■EAS4Y-E□□□-ARA ■ ■-3 EASM4YE□□□ARA ■■EAS4Y-D□□□-ARA ■ ■-3 EASM4YD□□□ARA ■■EAS6X-E□□□-ARA ■ ■-3 EASM6XE□□□ARA ■■EAS6X-D□□□-ARA ■■-3 EASM6XD□□□ARA ■■EAS6Y-E□□□-ARA ■ ■-3 EASM6YE□□□ARA ■■EAS6Y-D□□□-ARA ■ ■-3 EASM6YD□□□ARA ■■

Equipped

EAS4X-E□□□-ARM ■ ■-3 EASM4XE□□□ARM ■■EAS4X-D□□□-ARM ■ ■-3 EASM4XD□□□ARM ■■EAS4Y-E□□□-ARM ■ ■-3 EASM4YE□□□ARM ■■EAS4Y-D□□□-ARM ■ ■-3 EASM4YD□□□ARM ■■EAS6X-E□□□-ARM ■ ■-3 EASM6XE□□□ARM ■■EAS6X-D□□□-ARM ■ ■-3 EASM6XD□□□ARM ■■EAS6Y-E□□□-ARM ■ ■-3 EASM6YE□□□ARM ■■EAS6Y-D□□□-ARM ■ ■-3 EASM6YD□□□ARM ■■

◇Reversed Motor Type



Product Name

Driver Product Name

Not equipped

EAS4RX-E□□□-ARA ■ ■-3 EASM4RXE□□□ARA ■■

ARD-■■

EAS4RX-D□□□-ARA ■ ■-3 EASM4RXD□□□ARA ■■EAS4RY-E□□□-ARA ■ ■-3 EASM4RYE□□□ARA ■■EAS4RY-D□□□-ARA ■ ■-3 EASM4RYD□□□ARA ■■EAS4LX-E□□□-ARA ■ ■-3 EASM4LXE□□□ARA ■■EAS4LX-D□□□-ARA ■ ■-3 EASM4LXD□□□ARA ■■EAS4LY-E□□□-ARA ■ ■-3 EASM4LYE□□□ARA ■■EAS4LY-D□□□-ARA ■ ■-3 EASM4LYD□□□ARA ■■EAS6RX-E□□□-ARA ■ ■-3 EASM6RXE□□□ARA ■■EAS6RX-D□□□-ARA ■ ■-3 EASM6RXD□□□ARA ■■EAS6RY-E□□□-ARA ■ ■-3 EASM6RYE□□□ARA ■■EAS6RY-D□□□-ARA ■ ■-3 EASM6RYD□□□ARA ■■EAS6LX-E□□□-ARA ■ ■-3 EASM6LXE□□□ARA ■■EAS6LX-D□□□-ARA ■ ■-3 EASM6LXD□□□ARA ■■EAS6LY-E□□□-ARA ■ ■-3 EASM6LYE□□□ARA ■■EAS6LY-D□□□-ARA ■ ■-3 EASM6LYD□□□ARA ■■

Equipped

EAS4RX-E□□□-ARM ■ ■-3 EASM4RXE□□□ARM ■■EAS4RX-D□□□-ARM ■ ■-3 EASM4RXD□□□ARM ■■EAS4RY-E□□□-ARM ■ ■-3 EASM4RYE□□□ARM ■■EAS4RY-D□□□-ARM ■ ■-3 EASM4RYD□□□ARM ■■EAS4LX-E□□□-ARM ■ ■-3 EASM4LXE□□□ARM ■■EAS4LX-D□□□-ARM ■ ■-3 EASM4LXD□□□ARM ■■EAS4LY-E□□□-ARM ■ ■-3 EASM4LYE□□□ARM ■■EAS4LY-D□□□-ARM ■ ■-3 EASM4LYD□□□ARM ■■EAS6RX-E□□□-ARM ■ ■-3 EASM6RXE□□□ARM ■■EAS6RX-D□□□-ARM ■ ■-3 EASM6RXD□□□ARM ■■EAS6RY-E□□□-ARM ■ ■-3 EASM6RYE□□□ARM ■■EAS6RY-D□□□-ARM ■ ■-3 EASM6RYD□□□ARM ■■EAS6LX-E□□□-ARM ■ ■-3 EASM6LXE□□□ARM ■■EAS6LX-D□□□-ARM ■ ■-3 EASM6LXD□□□ARM ■■EAS6LY-E□□□-ARM ■ ■-3 EASM6LYE□□□ARM ■■EAS6LY-D□□□-ARM ■ ■-3 EASM6LYD□□□ARM ■■

●A number indicating the stroke length is entered where the box □ is located within the product name, and in the electric linear slide product name . ●Either A (single-phase 100-115 (120) VAC), C (single-phase 200-230 (240) VAC), S (three-phase 200-230 VAC: pulse input only), or K (24 VDC) indicating power supply input is entered where the box ■■ is located within the product name and in the driver product name. ●Either C (AC input) or K (DC input) indicating the power supply input is entered where the box ■■ is located within the electric linear slide product name.

E-52



Linear & Rotary Actuators E-15 - Oriental Motor U.S.A. … Linear & Rotary Actuators E-15 Electric...

Documents

Transcript of Linear & Rotary Actuators E-15 - Oriental Motor U.S.A. … Linear & Rotary Actuators E-15 Electric...