Linde 7919040041 & 7919040042 Forklift Truck Joystick
4
RT-500 Electric Forklift Joystick Automatic spring return Single axis, dual axis and 360° control Modular design Full sealed design Adapt to any complex environment RT-500 industrial joystick is mainly used in hydraulic proportional control construction machinery and variable frequency motor control, such as Linde electric forklift truck (Part no. 7919040041 & 7919040042). Environment Parameter Operating Temperature - 25°C ~ +80°C Protection Grade IP65 Vibration Amplitude±3g, Frequency 10Hz-200Hz Impact 20g, 6ms, Semi-sinusoidal EMC Anti-interference Rank 100v/m,30MHz to 1GHz, 80% sine-wave modulation, meet EN50082-2 (1995) standard EMC Emission Rank Rank B, 150KHz to 30MHz, meet EN50081-2 (1993) standard ESD Anti-interference Rank Rank 4, 8KV contact discharge,15KV air discharge, meet the IEC61000-4-2 standard Mechanical Parameter Mechanical Angle ±32°（Potentiometer）±20°（Hall Sensor） Operating Torque 15N (50Nmax) Mechanical Life 5 million Mechanical Error ±0.5° Electrical Parameter Hall Power Supply Voltage 5±0.5V DC Power Supply Current Consumption 6.5mA/hall sensor Key Features Application Technical Information 22 - 58 [email protected] | www.runntech.com
description
RT-500 industrial joystick is mainly used in hydraulic proportional control construction machinery and variable frequency motor control, such as Linde Electric Forklift Truck (cross and 360° control).
Transcript of Linde 7919040041 & 7919040042 Forklift Truck Joystick
-
RT-500 Electric Forklift Joystick
Automatic spring return
Single axis, dual axis and 360 control
Modular design
Full sealed design
Adapt to any complex environment
RT-500 industrial joystick is mainly used in hydraulic proportional control construction machinery and variable frequency motor
control, such as Linde electric forklift truck (Part no. 7919040041 & 7919040042).
Environment Parameter
Operating Temperature - 25C ~ +80C Protection Grade IP65 Vibration Amplitude3g, Frequency 10Hz-200Hz Impact 20g, 6ms, Semi-sinusoidal
EMC Anti-interference Rank 100v/m,30MHz to 1GHz, 80% sine-wave modulation, meet EN50082-2 (1995) standard
EMC Emission Rank Rank B, 150KHz to 30MHz, meet EN50081-2 (1993) standard
ESD Anti-interference Rank Rank 4, 8KV contact discharge,15KV air discharge, meet the IEC61000-4-2 standard
Mechanical Parameter
Mechanical Angle 32Potentiometer20Hall Sensor Operating Torque 15N (50Nmax) Mechanical Life 5 million Mechanical Error 0.5
Electrical Parameter
Hall Power Supply Voltage 50.5V DC Power Supply Current Consumption 6.5mA/hall sensor
Key Features
Application
Technical Information
22 - 58 [email protected] | www.runntech.com
-
Resolution Ratio infinite Maximum Voltage 15VDC Reversed Polarity Maximum Voltage 14.5VDC Load Resistance 5K Median Voltage (no-load) 48 - 52%Vs
Potentiometer
Power Supply Voltage DC24V Supply Current
-
Common Closed Position
Remarks: remark from customers
Wiring Instruction
Potentiometer Output
1 6
2
3
4
5
Hall Voltage Output
1sw
a
1sw
b
2sw
a
2sw
b
5V 0 Xout
Yout
3sw
a
3sw
b
4sw
a
4sw
b
1 2 3 4 5 6 7 8 9 10
5sw
a
5sw
b
6sw
a
6sw
b
11 12 13 14 15 16 17 18 19 20
24 - 58 [email protected] | www.runntech.com
-
Product Installation
25 - 58 [email protected] | www.runntech.com
About RunnTechRT-100 Industrial JoystickRT-200 Industrial JoystickRT-300 Crane Master ControllerRT-500 Electric Forklift JoystickRT-600 Industrial Hall JoystickRT-800 Industrial JoystickRT-900 Industrial JoystickRT-01 Industrial JoystickRT-02 Industrial JoystickRT-W100 Finger Dial WheelRT-P9000 Proportional AmplifierRT-F100 Foot PedalRT-F200 Foot PedalElectric Pallet Truck Multifunction Control Handle
