Zone 2 Hazardous Area Lighting (ATEX) - Fluorescent Luminaire - 36 Watt Single Zone 2 ATEX Luminaire
Lighting The Way - Fluorescent Lighting For Zone 2 And 22 · Pepperl+Fuchs offers a wide range of...
Transcript of Lighting The Way - Fluorescent Lighting For Zone 2 And 22 · Pepperl+Fuchs offers a wide range of...
FLUORESCENT LIGHTINGFOR ZONE 2 AND 22
LIGHTING THE WAY
PROCESS AUTOMATIONPROCESS AUTOMATION
2
ABOUT PEPPERL+FUCHS
OUR VALUES, OUR GOALS, OUR FOCUS – YOUR BENEFITS
Pepperl+Fuchs the world’s leading manufacturer of intrinsically safe explosion protection and electronic
sensors acquired UK based Walsall Ltd to expand the Process Automation Division with significant
expertise in the development and manufacture of installation equipment for use in hazardous areas and
harsh environments.
Walsall Ltd has over one hundred years of UK heritage dating back to the early days of Walsall Conduits PLC, which
once dominated the world of mechanical explosion protection equipment. In addition to the hazardous area approved
lighting suitable for Zone 2 and 22 installation shown in this brochure, Pepperl+Fuchs has a wide range of complementary
products also available. These include:
Lighting for Zone 1 Applications
A range of general purpose and emergency lighting products suitable for installation in Zone 1 hazardous area locations.
Enclosures and Terminal Boxes
High quality terminal junction box enclosures in the increased safety, intrinsic safety and flameproof protection classes
available in a wide range of sizes and materials such as GRP and Stainless Steel.
Local Control
A comprehensive range of standard and customised multi function local control stations and control panels are available
in GRP, Stainless steel, and Cast Iron Enclosures.
Hazardous Area Enclosure Solutions
UK based design and build service offering a fully customised explosion proof panel assembly and wiring service using a
variety of explosion proof (Exd) and increased safety (Exe) enclosures to house non certified electrical components.
3
HAZARDOUS AREA FLUORESCENT LIGHTING
FLUORESCENT LIGHTING FOR ZONE 2 AND 22 APPLICATIONS
Pepperl+Fuchs offers a wide range of fluorescent lighting suitable for installation in Zone 2 and 22
hazardous area locations. The Elenor product range covers applications for general purpose and emergency
lighting with a wide range of single and twin fittings using a design which is simple to install and maintain.
The products are ideally suited to a range of applications and industries including:
■ Oil & Gas
■ Petrochemical
■ Pharmaceutical
■ Distilleries
■ Water Pumping and Sewerage Treatment
■ Agricultural
■ Food and Beverage
P. 04
P. 16
P. 28
P. 30
STANDARD FLUORESCENT
ESCAPE ROUTE
EMERGENCY FLUORESCENT
BULKHEAD
3
Elenor Range
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9113
_eng
_175
7376
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 4
VIPET-N-118HFEx nA Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.09 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 1Length 600 mm ( 2 ft )Power 18 W
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 2 x M20 1 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 1.7 kgDimensions
A 685 mmB 119 mmC 110 mmD 176 mm
Features
• Power 18 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard
A
FE
C
DB
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9113
_eng
_175
7376
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 5
VIPET-N-118HFEx nA Fluorescent Light Fitting
F 340 mmMounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature -20 ... 40 °C (-4 ... 104 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 02 ATEX 0313X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T82°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
1 x nylon Ex e sealing plug
Relea
se da
te 20
12-09
-04 2
2:55
Date
of iss
ue 2
012-
09-0
723
9114
_eng
_175
7377
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 6
VIPET-N-218HFEx nA Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.18 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 2Length 600 mm ( 2 ft )Power 2 x 18 W
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 4 x M20 2 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 2.2 kgDimensions
A 685 mmB 173 mmC 110 mmD 230 mm
Features
• Power 2 x 18 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard
C
DB
A
FE
Relea
se da
te 20
12-09
-04 2
2:55
Date
of iss
ue 2
012-
09-0
723
9114
_eng
_175
7377
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 7
VIPET-N-218HFEx nA Fluorescent Light Fitting
F 340 mmMounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature -20 ... 40 °C (-4 ... 104 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 02 ATEX 0313X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T82°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
1 x nylon Ex e sealing plug
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9115
_eng
_175
7378
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 8
VIPET-N-136HFEx nA Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.16 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 1Length 1200 mm ( 4 ft )Power 36 W
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 2 x M20 1 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 3 kgDimensions
A 1290 mmB 119 mmC 110 mmD 176 mm
Features
• Power 36 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard
A
FE
C
DB
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9115
_eng
_175
7378
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 9
VIPET-N-136HFEx nA Fluorescent Light Fitting
F 700 mmMounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature -20 ... 40 °C (-4 ... 104 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 02 ATEX 0313X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T86°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
1 x nylon Ex e sealing plug
Relea
se da
te 20
12-09
-04 2
2:55
Date
of iss
ue 2
012-
09-0
723
9117
_eng
_175
7379
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 10
VIPET-N-236HFEx nA Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.32 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 2Length 1200 mm ( 4 ft )Power 2 x 36 W
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 4 x M20 2 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 3.6 kgDimensions
A 1290 mmB 173 mmC 110 mmD 230 mm
Features
• Power 2 x 36 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard
C
DB
A
FE
Relea
se da
te 20
12-09
-04 2
2:55
Date
of iss
ue 2
012-
09-0
723
9117
_eng
_175
7379
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 11
VIPET-N-236HFEx nA Fluorescent Light Fitting
F 700 mmMounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature -20 ... 40 °C (-4 ... 104 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 02 ATEX 0313X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T86°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
3 x nylon Ex e sealing plugs
Relea
se da
te 20
12-09
-04 2
2:55
Date
of iss
ue 2
012-
09-0
723
9118
_eng
_175
7380
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 12
VIPET-N-158HFEx nA Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.27 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 1Length 1500 mm ( 5 ft )Power 58 W
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 2 x M20 1 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 3.3 kgDimensions
A 1590 mmB 119 mmC 110 mmD 176 mm
Features
• Power 58 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard
A
FE
C
DB
Relea
se da
te 20
12-09
-04 2
2:55
Date
of iss
ue 2
012-
09-0
723
9118
_eng
_175
7380
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 13
VIPET-N-158HFEx nA Fluorescent Light Fitting
F 1000 mmMounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature -20 ... 40 °C (-4 ... 104 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 02 ATEX 0313X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T92°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
1 x nylon Ex e sealing plug
Relea
se da
te 20
12-09
-04 2
2:55
Date
of iss
ue 2
012-
09-0
723
9119
_eng
_175
7381
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 14
VIPET-N-258HFEx nA Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.51 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 2Length 1500 mm ( 5 ft )Power 2 x 58 W
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 4 x M20 2 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 4.8 kgDimensions
A 1590 mmB 173 mmC 110 mmD 230 mm
Features
• Power 2 x 58 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard
C
DB
A
FE
Relea
se da
te 20
12-09
-04 2
2:55
Date
of iss
ue 2
012-
09-0
723
9119
_eng
_175
7381
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 15
VIPET-N-258HFEx nA Fluorescent Light Fitting
F 1000 mmMounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature -20 ... 40 °C (-4 ... 104 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 02 ATEX 0313X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T93°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
3 x nylon Ex e sealing plugs
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9120
_eng
_175
7382
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 16
VIPET-N-EM-118HF-3HEx nA Emergency Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.09 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 1Length 600 mm ( 2 ft )Power 18 W
Emergency operation non-maintainedOperation time 3 h
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 2 x M20 1 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 2.3 kgDimensions
A 685 mmB 119 mm
Features
• Power 18 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard• Minimum of 3 hour duration in
emergency mode
A
FE
C
DB
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9120
_eng
_175
7382
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 17
VIPET-N-EM-118HF-3HEx nA Emergency Fluorescent Light Fitting
C 110 mmD 176 mmF 340 mm
Mounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature 0 ... 30 °C (32 ... 86 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 05 ATEX 0200X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T42°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
1 x nylon Ex e sealing plug
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9121
_eng
_175
7383
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 18
MULTIVIPET-N-EM-218HF-3HEx nA Emergency Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.18 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 2Length 600 mm ( 2 ft )Power 2 x 18 W
Emergency operation maintainedOperation time 3 h
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 4 x M20 2 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 2.9 kgDimensions
A 685 mmB 173 mm
Features
• Power 2 x 18 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard• Minimum of 3 hour duration in
emergency mode
C
DB
A
FE
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9121
_eng
_175
7383
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 19
MULTIVIPET-N-EM-218HF-3HEx nA Emergency Fluorescent Light Fitting
C 110 mmD 230 mmF 340 mm
Mounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature 0 ... 30 °C (32 ... 86 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 05 ATEX 0200X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T75°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
3 x nylon Ex e sealing plugs
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9122
_eng
_175
7385
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 20
MULTIVIPET-N-EM-136HF-3HEx nA Emergency Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.16 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 1Length 1200 mm ( 4 ft )Power 36 W
Emergency operation maintainedOperation time 3 h
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 4 x M20 2 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 3.4 kgDimensions
A 1290 mmB 119 mm
Features
• Power 36 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard• Minimum of 3 hour duration in
emergency mode
A
FE
C
DB
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9122
_eng
_175
7385
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 21
MULTIVIPET-N-EM-136HF-3HEx nA Emergency Fluorescent Light Fitting
C 110 mmD 176 mmF 700 mm
Mounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature 0 ... 30 °C (32 ... 86 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 05 ATEX 0200X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T75°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
1 x nylon Ex e sealing plug
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9123
_eng
_175
7386
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 22
MULTIVIPET-N-EM-236HF-3HEx nA Emergency Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.32 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 2Length 1200 mm ( 4 ft )Power 2 x 36 W
Emergency operation maintainedOperation time 3 h
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 2 x M20 1 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 4.4 kgDimensions
A 1290 mmB 173 mm
Features
• Power 2 x 36 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard• Minimum of 3 hour duration in
emergency mode
C
DB
A
FE
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9123
_eng
_175
7386
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 23
MULTIVIPET-N-EM-236HF-3HEx nA Emergency Fluorescent Light Fitting
C 110 mmD 230 mmF 700 mm
Mounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature 0 ... 30 °C (32 ... 86 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 05 ATEX 0200X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T75°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
3 x nylon Ex e sealing plugs
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9124
_eng
_175
7387
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 24
MULTIVIPET-N-EM-158HF-3HEx nA Emergency Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.27 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 1Length 1500 mm ( 5 ft )Power 58 W
Emergency operation maintainedOperation time 3 h
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 4 x M20 2 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 3.7 kgDimensions
A 1590 mmB 119 mm
Features
• Power 58 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard• Minimum of 3 hour duration in
emergency mode
A
FE
C
DB
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9124
_eng
_175
7387
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 25
MULTIVIPET-N-EM-158HF-3HEx nA Emergency Fluorescent Light Fitting
C 110 mmD 176 mmF 1000 mm
Mounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature 0 ... 30 °C (32 ... 86 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 05 ATEX 0200X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T75°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
1 x nylon Ex e sealing plug
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9125
_eng
_175
7388
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 26
MULTIVIPET-N-EM-258HF-3HEx nA Emergency Fluorescent Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.51 ATerminal capacity 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Ceiling light fittingLamps T26 bi-pin fluorescent tube
Number of lamps 2Length 1500 mm ( 5 ft )Power 2 x 58 W
Emergency operation maintainedOperation time 3 h
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 4 x M20 2 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 5.3 kgDimensions
A 1590 mmB 173 mm
Features
• Power 2 x 58 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Suitable for 220-240V AC 50/60Hz
operation• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard• Minimum of 3 hour duration in
emergency mode
C
DB
A
FE
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9125
_eng
_175
7388
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 27
MULTIVIPET-N-EM-258HF-3HEx nA Emergency Fluorescent Light Fitting
C 110 mmD 230 mmF 1000 mm
Mounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature 0 ... 30 °C (32 ... 86 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 05 ATEX 0200X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T5 T75°C
International approvalsGOST-R approval GOST-R B02432ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
3 x nylon Ex e sealing plugs
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9126
_eng
_175
7389
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 28
POINTER-N-I-PC-WR-EP-211Ex nA Compact Fluorescent Bulkhead Light Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 220 ... 240 V 50Hz / 60HzOperating current 0.08 ATerminal capacity 3 x 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Bulkhead light fittingLamps compact fluorescent lamp
Number of lamps 2Power 2 x 11 W
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 4 x M20 2 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 1.2 kgDimensions
A 385 mmB 173 mmC 105 mmD 230 mmF 100 mm
Features
• Power 2 x 11 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard
C
DB
A
FE
Relea
se da
te 20
12-09
-04 2
2:54
Date
of iss
ue 2
012-
09-0
723
9126
_eng
_175
7389
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 29
POINTER-N-I-PC-WR-EP-211Ex nA Compact Fluorescent Bulkhead Light Fitting
Mounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature -20 ... 40 °C (-4 ... 104 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 02 ATEX 0144X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nA tD A II T4 T87°C
ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
3 x nylon Ex e sealing plugs
Relea
se da
te 20
12-09
-04 2
2:53
Date
of iss
ue 2
012-
09-0
723
9127
_eng
_175
7390
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 30
BASET-N-I-PC-WR-111-3HEx nR Compact Fluorescent Emergency Exit Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 230 V 50HzOperating current 0.08 ATerminal capacity 3 x 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Bulkhead light fittingLamps compact fluorescent lamp
Number of lamps 1Power 11 W
Emergency operation non-maintainedOperation time 3 h
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 4 x M20 2 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 1.8 kgDimensions
A 385 mmB 173 mmC 105 mm
Features
• Power 11 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard• Minimum of 3 hour duration in
emergency mode• LED status indication
C
DB
A
FE
Relea
se da
te 20
12-09
-04 2
2:53
Date
of iss
ue 2
012-
09-0
723
9127
_eng
_175
7390
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 31
BASET-N-I-PC-WR-111-3HEx nR Compact Fluorescent Emergency Exit Fitting
D 230 mmF 100 mm
Mounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature 0 ... 30 °C (32 ... 86 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 04 ATEX 0219X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nR tD A II T6 T45°C
ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
3 x nylon Ex e sealing plugs
Relea
se da
te 20
12-08
-15 1
8:41
Date
of iss
ue 2
012-
09-0
7t15
4633
_eng
_175
7391
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 32
BASET-N-I-PC-WR-109-3HEx nR Compact Fluorescent Emergency Exit Fitting
Dimensions (mm)
Technical dataElectrical specificationsOperating voltage 230 V 50HzOperating current 0.08 ATerminal capacity 3 x 2.5 mm2 Connection block suitable for through wiringControl gear high frequency electronic ballastFitting type Bulkhead light fittingLamps compact fluorescent lamp
Number of lamps 1Power 9 W
Emergency operation non-maintainedOperation time 3 h
Mechanical specificationsCover fixing stainless steel snap shut fastenersProtection degree IP66Cable entry
Number of cable entries 4 x M20 2 at each endMaterial
Housing PolycarbonateLamp cover PolycarbonateReflector 0.6 mm Mild steelFinish Body: as moulded
reflector: epoxy powder coated, whiteSeal polyurethane foam
Mass approx. 1.8 kgDimensions
A 385 mmB 173 mmC 105 mm
Features
• Power 9 W• Installation in Zone 2 and Zone 22• Electronic HF control gear• Multiple locking points on diffuser that
can be hinged from both sides• Fast opening and closing of fitting via
snap shut fasteners• Anti-glare diffuser cover• Stainless steel surface mounting
brackets supplied as standard• Minimum of 3 hour duration in
emergency mode• LED status indication
C
DB
A
FE
Relea
se da
te 20
12-08
-15 1
8:41
Date
of iss
ue 2
012-
09-0
7t15
4633
_eng
_175
7391
.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com 33
BASET-N-I-PC-WR-109-3HEx nR Compact Fluorescent Emergency Exit Fitting
D 230 mmF 100 mm
Mounting 2 x stainless steel removable mounting bracketsGrounding Internal connectionAmbient conditionsAmbient temperature 0 ... 30 °C (32 ... 86 °F)Data for application in connection with Ex-areasEC-Type Examination Certificate FTZU 04 ATEX 0219X
Group, category, type of protection, temperature class
¬ II 3 GD Ex nR tD A II T6 T45°C
ConformityProtection degree EN 60529General informationSupplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of
Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
AccessoriesDesignation 1 x nylon non-armoured Ex e cable gland
3 x nylon Ex e sealing plugs
Subject to modificationsCopyright Pepperl+Fuchs
www.pepperl-fuchs.com
Northern Europe HeadquartersPepperl+Fuchs GB Ltd. Oldham · EnglandTel. +44 161 6336431E-Mail: [email protected]
For the Pepperl+Fuchs representative closest to you check www.pepperl-fuchs.com/pfcontact
PROCESS AUTOMATION – PROTECTING YOUR PROCESS
For over a half century, Pepperl+Fuchs has been continually providing new concepts for the world of process automation. Our company sets standards in quality and innovative technology. We develop, produce and distribute electronic interfacemodules, Human-Machine Interfaces and hazardous location protection equipment on a global scale, meeting the most deman-ding needs of industry. Resulting from our world-wide presence and our high flexibility in production and customer service, we are able to individually offer complete solutions – wherever and whenever you need us. We are the recognized experts in our technologies – Pepperl+Fuchs has earned a strong reputation by supplying the world’s largest process industry companies with the broadest line of proven components for a diverse range of applications.