Lighting for Outdoor Workplaces
Transcript of Lighting for Outdoor Workplaces
-
8/7/2019 Lighting for Outdoor Workplaces
1/36
licht.wissenOutdoor workplaces 13
-
8/7/2019 Lighting for Outdoor Workplaces
2/36
U2
2 Introduction
4 Lighting technology
10 Industrial plants and power facilities
14 Transport, roads and routes
18 Storage and logistics
20 Construction sites
22 Lighting tables
26 Lamps
28 Luminaires
30 Literature
31 Acknowledgements for photographs
31 Order forms
32 Imprint
33 Information on lighting applications: the series of bookletspublished by Frdergemeinschaft Gutes Licht
Contents
1
2
3
-
8/7/2019 Lighting for Outdoor Workplaces
3/36
1
Foreword
orrect lighting has longbeen identified as acrucial factor for health
and safety at work. The mes-
sage that every lighting crite-rion needs to be duly consi-dered in the design of a plantor facility is communicated ina variety of ways. But atten-tion generally focuses on inte-riors. It is often forgotten thata considerable amount ofwork is performed outdoors at workplaces with no orinsufficient natural lighting.
Outdoor workplace lightingneeds to meet specific requi-rements requirements that
differ from those of both clas-sical interior lighting and roadlighting. The issue of goodlighting for outdoor workpla-ces merits special attention atpresent because new stipula-tions have been developedto take account of technolo-gical advances, occupationalmedicine, hygiene and theresults of other occupationalresearch. These requirementsare set out in BGR 131, therule for "Natural and artificialworkplace lighting" developed
by the institutions responsiblefor statutory accident insuranceand prevention in Germany.Aimed at employers, designersand constructors, it providespointers on the lighting re-quired for workplaces outsidebuildings.
BGR 131 focuses on thehealth and safety of employeesat work and sets out require-ments for those two areas.It does not look at what isneeded to meet visual
physiological and production-related requirements. Theseissues are addressed in thedraft European standard DINEN 12464-2, which definesthe standards that need to beobserved in practice to meetthe visual comfort and visualperformance requirements ofmost outdoor workplaces.There is thus a clear dividingline between the Europeanstandard and the BG rule.
C
Dipl.-Ing. Gerold Soestmeyer
Chairman of the "Lighting, light
and colour" working group of the
expert committee looking at
"Impacts and work-related healthhazards" for the BG Central
Office for Safety and Health.
Ensuring that lighting meetsall health and safety require-ments is an attainable goalfor any company.
Compliance with rules andstandards aside, energy effi-ciency is an important invest-ment criterion. Technicallysophisticated lamps and
luminaires offer a grat deal ofscope for optimizing lightinginstallations from an ergono-mic, economic and environ-mental viewpoint.
Some of that scope is createdby lighting management sys-tems, which are now availablenot only for indoor lighting butalso for outdoor installations.
I hope this licht.de booklet willbe widely read and receivedwith interest by all those
responsible for good lighting.
4
5
76
8
-
8/7/2019 Lighting for Outdoor Workplaces
4/36
Illuminance,measured in lux (lx), is theluminous flux from a lightsource falling on a givensurface. Where an area of1 square metre is uniformlyilluminated by 1 lumen of
luminous flux, illuminanceis 1 lux.
Luminanceis the brightness of aluminous or illuminatedsurface as perceived by thehuman eye. Measured incd/m2 or cd/cm2, itexpresses the intensity of the
light emitted or reflected by asurface per unit area.
Luminous intensityis the amount of luminousflux radiating in a particulardirection. It is measured incandela (cd). The spatialdistribution of luminousintensity normally depicted
by an intensity distributioncurve (IDC) defines theshape of the light beamemitted by a luminaire,reflector lamp or LED.
Luminous fluxis the rate at which light isemitted by a lamp.Measured in lumen (lm), itdefines the visible light radi-ating from a light source inall directions.
2
Introduction
Good lighting foroutdoor workplacesBasically speaking, outdoorworkplace lighting addressesthe same task as interiorlighting, ensuring visual taskperformance and health andsafety at work.However, the designrequirements are different.During the day, our eyes pro-
vide around 80% of thesensory impressions we regis-ter. But at night, the visualacuity of the eye drops to just3 - 30% of its day-timelevel depending on lighting.What is more, the risk of glareis significantly higher than inbright conditions.
Spatial orientation and fieldof vision are considerablyreduced in darkness andphysical performance dropsto less than 10% as a resultof fatigue due to disruption ofnatural sleep patterns. This iswhy most accidents causedby human error occur atnight. Human biorhythms aresubject to marked fluctuation.
Performance decreasessharply at night; hence theloss of concentration and theincrease in the risk ofaccidents. Accidents at nightare both more frequent andmore serious than they areduring the day.
The four basic lighting quantities
Physical relationships areexpressed in lighting byspecific variables and units.
The four most widely usedterms are explained below:
Outdoor work often entails hazards
9 10
14131211
-
8/7/2019 Lighting for Outdoor Workplaces
5/36
3
Note
Lighting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26Luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Max.
Min.Melatonin (sleep hormone)
Cheerfulness
06 08 10 12 14 16 18 20 22 24 02 0604h
6 12 18 24 6 12 18 24 6
Cortisol Attention
Melatonin Body temperature
h
Correlation of melatonin levels and "cheerfulness"
Wave patterns of different circadian rhythms
Many areas of an airport are outdoor workplaces
In contrast to indoor work, thevisual effort required atoutdoor workplaces issignificantly increased by thefact that there are generallyno walls to reflect light, so on-ly direct lighting is possible.This can often produce deepshadows.Generally speaking, the visualsituation is then further aggra-
vated by a dark background,resulting in higher luminancecontrasts. The draft standardDIN EN 12464-2 definesrequirements for ensuringgood visual performance andgood visual comfort.
Due to visual physiologicalneeds and the demands ofproduction processes, these
requirements may be higherthan those formulated foroccupational health andsafety.
After a general look at thephysiology of vision and thebasic variables and qualityfeatures of lighting, thisbooklet examines some of themain lighting requirements
that need to be met atoutdoor workplaces.
It then profiles a range ofmajor applications, citing spe-cific assessment criteria, andpresents a useful table of therequirements set out for thedifferent applications in thedraft European standardDIN EN 12464-2.
15
16
17
18
-
8/7/2019 Lighting for Outdoor Workplaces
6/36
4
Lighting technology
Seeing and being seen:good lighting avoidsaccidentsDaylight illuminance rangesfrom 5,000 to 100,000 lux (lx).On a moonlit night, however,it reaches only 1 lx at most.
The fact that we can "see"over a vast bandwidth like thisis due to the eye's ability to
adapt. At low illuminancelevels, however, visual perform-ance is impaired. Good light-ing at outdoor workplaceshelps significantly to guardagainst accidents, enabling usto see well and be seen at all
times. In twilight and at night,perception and recognitionare no longer sufficiently guar-
anteed, so artificial lighting isvital for accident prevention. Itis absolutely essential, forexample, at high-risk work-places at woodworkingmachines or on scaffolding orramps (where safety depends
on ability to see) or at hazard-ous workplaces near trucks,conveyors or tracks (where
being seen is a key safetyfactor).
The need for good lightingat outdoor workplaces isexplained by the followingphysiological facts.
Even signal-coloured objects that are clearly visible during the day are hard to make out in twilight.
Where cranes are in operation, care must be taken to ensure good visual conditions for both crane operators and ground personnel.
19 20
21 22
-
8/7/2019 Lighting for Outdoor Workplaces
7/36
5
Note
Lighting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26Luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Good bay entrance lighting avoids adaptation hazards.
Visual performance and colour identification are dependent
on lighting.
Colour vision,light/dark visionDay vision is provided bycone receptors in the eyewhich are sensitive to colour.This is when visual perform-ance is at its best: colours
can be distinguished andobjects can be clearly madeout in 3D. At night, colour-insensitive rod receptors takeover, providing a degree oflight/dark vision that only real-ly enables us to get our bear-ings.
Where not enough daylight isavailable as at outdoorworkplaces adequate visualperformance and colour dis-crimination can only be achie-ved by using artificial lighting
to activate the cone receptorsthat make better visualperformance possible.
Contrast sensitivityContrast sensitivity is the termused to describe the ability toperceive differences in lumi-nance in the field of vision.The higher the brightnesslevel (adaptation luminance),the finer the differences inluminance perceived. Con-trast sensitivity is reduced byglare.
Visual acuityThe eye's ability to make outthe contours and details ofshapes as well as shades ofcolour is determined by visualacuity. Visual acuity improvesas adaptation luminance
increases, creating betterconditions for making outobstructions, etc..
ContrastsContrasts are differences inbrightness and colour in thefield of vision. To be perceivedby the human eye, they needto be sufficiently pronounced.The minimum contrast percei-ved depends on the ambientbrightness (adaptation lumi-nance): the brighter the sur-roundings, the lower the con-
trast perceived.
In darker surroundings, anobject needs either to con-trast more sharply or to belarger in order to be percei-ved. So where fine visualdetails need to be made out in an aircraft maintenancezone at an airport, for exam-ple higher illuminance levelsare required.
Adaptation timeIt takes time for the eye toadapt to different levels ofbrightness. The adaptationprocess and thus the adap-tation time depend on theluminance at the beginning
and end of any change inbrightness: adapting fromdark to light takes onlyseconds, adapting from lightto dark can take severalminutes. Visual performanceat any one time depends onthe state of adaptation: themore light available, the better
the visual performance achie-ved. Visual impairment occurswhen our eyes have too littletime to adapt to differences inbrightness. This explains, forexample, the increased risk ofaccident where fork-lift truck
operators leave a brightly litbay and enter a dark storagearea outdoors and collide withpersons or objects they fail tosee. Correct illuminance levelsfor factory or warehouse bayentrances need to be gearedto the illuminance inside thebay.
23 24
25
-
8/7/2019 Lighting for Outdoor Workplaces
8/36
6
Lighting technology
Quality criteriaActivities at outdoor work-places entail a variety of visualtasks for which specific light-
ing quality requirements canbe identified.
The main criteria for out-door workplace lighting are:luminance distribution, illumi-nance, glare, direction of light,light colour and colour render-ing, light flicker.
All lighting quality criteria pri-marily apply to the task area.This is the area of the work-place where the visual task isperformed. Where the size
and location of the task areaare not known, any areawhere the task could be per-formed must be assumed toform part of the task area forthe purposes of lighting plan-ning. As in interior lighting,precise analyses need to beperformed to establish reason-able task area coordinates foreach sworkplace.
Adequate levelof brightnessTo enable people to see well
at outdoor workplaces, anadequate level of brightness/lighting is essential. This isdetermined by the luminanceand the way it is distributed.Luminance (in cd/m2) is thelight reflected by a surface
into the eyes of the observer.Balanced luminance distribu-tion determines visual acuity,contrast sensitivity and the
efficiency of ocular functionssuch as accommodation,convergence, pupillary chan-ge, eye movement, etc.).
Luminance distribution in thefield of vision also affects visu-al comfort. Wherever possi-ble, marked changes in lumi-nance should therefore beavoided within the field ofvision. At outdoor workplaces e.g. construction sites thescope for doing so is limitedbecause vertical surfaces in
the wider surroundings aremostly in darkness. One fac-tor influencing luminance isthe reflectance of the illumina-ted surface, which, in contrastto indoor lighting scenarios,tends to be very low at anoutdoor workplace. The basicrule is: the lower the reflectan-ce and the more difficult thevisual task, the higher the illu-minance needs to be.
IlluminanceLuminance depends crucially
on illuminance (in lx), which isdefined as the amount of lightfalling on a surface.
Illuminance and illuminancedistribution are major factorsinfluencing the speed and reli-
luminous surfaceperceived surface
luminous intensity
Luminance describes the physiological impact of light.
ability with which a visual task
can be registered and addres-sed. For outdoor workplaces,the draft standard DIN EN12464-2 contains tables set-ting out the illuminance requi-red, depending on the type ofarea, visual task or activitypresent. This illuminance needsto be realised in the task area.The reference surface may behorizontal, vertical or inclined.At workplaces that are per-manently manned, illuminancemust be no lower than 50 lx.
Where visual tasks differ fromthose assumed as standard,illuminance can be raised orlowered by at least one gradeon the illuminance scale,which ranges from 5 lx to2,000 lx and is divided into
grades with a factor of around
1.5. Higher illuminances thanthose shown in the tables arerecommended especiallywhere the visual work is
particularly demanding, the visual task or persons
are moving, precision or productivity
is particularly important, the eyesight of the
persons working is belowaverage,
visual details are particu-larly fine or low-contrast,
the visual task needs tobe performed for anunusually long time.
Illuminance in the surroundingarea may be lower than theilluminance in the task areabut should make for a balan-
26
27
-
8/7/2019 Lighting for Outdoor Workplaces
9/36
7
Note
Lighting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26Luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Goodlighting
Colour
rendering
Lightinglevel
Gla
re
l
imitation
Harmon
ious
distribu
tion
Lightcolour Dire
ction o
f light
Visual ambience
Visua
lcomfo
rt
Visua
lperfo
rmance
m
mm
The planes on which primary visual tasks are performed may be horizontal, vertical or inclined standard illuminance
requirements m apply analogously.
ced distribution of luminance
in the field of vision. The "sur-rounding area" includes sur-faces in the field of visionwhich immediately surroundthe work area. The standardcites no dimensions definingthis area more closely. It should
be noted, however, that the
ambient lighting needs tobe geared to the task areailluminance so that adequateadaptation luminance is en-sured. Given this requirement,the task area defined shouldnot be too small.
Uniformity of illuminanceThe task area must be illumi-nated as uniformly as possi-ble. Uniformity of illuminanceU = Emin/Em in the task area is
stipulated for different tasksin the draft standard DIN EN12464-2. Uniformity in thesurrounding area must notbe lower than U = 0.10.
Value on installationAll the illuminance valuesstipulated in standards aremaintained values, i.e. valuesbelow which illuminance mustnot fall at any time. As thelength of time a lighting installa-tion is in operation increases,the values installed at the out-
set decrease as a result oflamps and luminaires ageingand becoming soiled. So, toenable an outdoor installa-tion's operating life to be
extended without additionalmaintenance work, values oninstallation should be corres-pondingly higher. How muchhigher is determined by main-tenance factors. Values oninstallation are calculated asfollows: value on installation =maintained value /maintenancefactor. Maintenance factors as well as all the assumptionsmade to determine them must be stated by the lightingdesigner.
Good lighting takes account of many quality criteria.
The maintained value is the local average illuminance at which the
system requires maintenance. Example: maintenance interval 3 years.
28
29
30
Illuminance of the Illuminance oftask area surrounding areas
lx lx 500 100
300 75200 50
150 30
50 to 100 20
< 50 no stipulation
Illuminance levels in surrounding areas, depending on levels in the task area
-
8/7/2019 Lighting for Outdoor Workplaces
10/36
8
Lighting technology
GlareGlare is produced by brightsurfaces in the field of visionand can be perceived as either
discomforting (psychological)glare or disabling (physiologi-cal) glare. The glare causedby light bouncing off reflectivesurfaces is generally knownas veiling reflection or reflec-ted glare.
GR=27+24log10Lvl
0,9Lve[ ]
Directional lightingDirectional lighting is a toolused to emphasize objects,surface structures or persons.
The term used to express thebalance between diffuse anddirectional light is "modelling",which is thus a lighting quality
Reflections can affect the clarity with which a visual task is perceived.
Only under directional light (left) do three-dimensional structures
become visible.
To avoid errors, fat igue andaccidents, it is important tolimit glare especially at view-
ing angles above the hori-zontal. The degree of directglare caused by luminaires inan outdoor lighting installationis described by the glarerating GR.
Where:
Lvl is the total veilingluminance in cd/m2
caused by the lightinginstallation
Lve is the equivalent veilingluminance of the surroun-dings in cd/m2.
Assessment of glare GRunbearable 80 90
disturbing 60 70
just admissible 40 50
noticeable 20 30
unnoticeable 10
Connection between glare ratings and assessments of glare
Veiling reflection andreflected glare
Highly luminous reflections ona visual task can affect howwell the task is perceived.Veiling reflections and reflectedglare can be prevented orreduced by
appropriate arrangementof luminaires andworkplaces,
finishes (matt surfaces), limitation of luminaire
luminance, enlargement of the
luminous surface of theluminaires.
criterion. Modelling is achie-ved when light comes predom-inantly from one direction although care should be
taken to avoid creating harshshadows.
Light colour andcolour renderingThe light colour of lamps isexpressed by correlatedcolour temperatures. Selec-ting a light colour is a matter
of psychology, aesthetics andwhat is considered natural.Because these broadly sub-jective criteria differ from onearea of Europe to another,planning value tables containno recommendations for lightcolours.
That matter aside, light colouralso determines lamp lumi-nous efficacy, which in turnimpacts on lighting systemcosts. In Central Europe,warm-white high pressure
sodium vapour lamps are thelight source most widely usedfor reasons of economy andmetal halide lamps for neutral-white light are the light sourceof choice where better colourrendering is required.
33
31 32
-
8/7/2019 Lighting for Outdoor Workplaces
11/36
9
Note
Lighting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26Luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Despite identical light colour, the different colour rendering properties of lamps lead to variations in colour perception. Where the spectrum of a lamp contains
little red light, for instance, red surface colours are only incompletely rendered.
Light colour Correlated colour temperature TCPWarm white below 3300 K
Neutral white from 3 300 K to 5300 K
Daylight white over 5300 K
For visual performance, com-
fort and sense of wellbeing, itis important that the coloursof surroundings, objects andhuman skin are renderedaccurately and naturally. Thismakes people look good andhealthy.
To provide an objective yard-stick for the colour rendering
properties of light sources,
the general colour renderingindex Ra was introduced. Thehighest Ra value possible is100. As colour rendering qual-ity decreases, this declines.Safety colours must alwaysbe identifiable as such. Toensure this, the colour render-ing index needs to be 20.
Flicker andstroboscopic effectsFlickering light can be distrac-ting and give rise to physiolo-gical complaints such as head-aches. Stroboscopic effects
can cause dangerous situa-tions by interfering with per-ception of machine parts rota-ting or moving back and forthat high speed. On construc-tion sites, for instance, thiscan result in a heightened riskof accidents at sawing machi-nes.
Lighting systems should bedesigned so that light flickerand stroboscopic effects areavoided. This can be achie-ved, for example, by using
discharge lamps operatedby electronic ballasts at highfrequencies.
Disruptive effectsLighting systems for outdoorworkplaces can contribute toa brighter night sky and sur-roundings. Apart from this,light emissions can lead tophysiological problems such
as troubled sleep, and nega-tive impacts on fauna and floracannot be ruled out. Hencethe limits imposed by stan-dards to curb light emissions,especially emissions directedupwards. Limits are set toavoid disturbance for localresidents and road users.
35 36
34
-
8/7/2019 Lighting for Outdoor Workplaces
12/36
construction sites, in the engi-neering, plant constructionand shipbuilding industries aswell as in the energy sectorand agriculture. Alongsideproduction-oriented opera-tions, a major role is playedhere by storage, logistical and
transport activities, which willbe dealt with separately in alater section. Values need tobe defined for the relevantlighting design variables,depending on the importanceof the work, the degree of riskor the difficulty of the visual
task. In many cases provi-ded that jobs are comparableor similar the lighting guide-lines for indoor workplaces(cf. EN 12464-1) can providepointers on the illuminancelevels required outdoors.Values between 30 and 60 lx
are typical for general activi-ties outdoors. For placeswhere special activities areperformed, appropriatesupplementary lighting isrequired.
10
Industrial plants and power facilities
The kind of workplaces mostfrequently found outdoorsrequire adequate lighting andagreeable surroundings toenable night-shift workers toperform their duties reliablyand without interruption. Thedraft standard DIN EN 12464-
2 provides recommendationsand guideline values for spe-cific lighting design variablesfor a wide variety of concreteapplications (see tables onpages 22 ff). On the followingpages, we also look at a num-ber of example applications
although the list makes noclaim to be exhaustive.
Work at machinesand with toolsActivities in an industrial set-ting are often characterisedby people working with tools,
at machines or in plants. Out-door workplaces are typicallyfound in the chemical andpetrochemical industry, inother industries with outdoorprocessing facilities, in theraw materials, waste manage-ment and mining sectors, at
37 38
39
-
8/7/2019 Lighting for Outdoor Workplaces
13/36
UniformityDefining task areas wherequality criteria apply is fre-quently a difficult exercise,especially at industrial work-places. Small illuminatedspaces give rise to markedluminance differences in the
field of vision, which meansthe eye constantly needs toadapt. This leads to an in-creasing loss of concentrationand premature fatigue, result-ing, in turn, in work errors anda heightened risk of accidents.
This is avoided where workareas as a whole are brightlylit. It also facilitates communi-cation with the work teamand the working environmentand thus helps promote asense of wellbeing, heightenmotivation and boost produc-
tivity.
So there should be no disturb-ing dark zones in the taskarea itself. The admissibleratio between the lowest andaverage illuminance dependson the visual task performed
and ranges from 0.25 forbrief, straightforward opera-tions (e.g. handling large con-struction elements) through to0.5 (e.g. for inspections orinstallation work).
In addition, lighting in the sur-
rounding area needs to meetthe standard requirements setout for the illuminance stipula-ted for the relevant task area(see lighting tables). A specialconsideration here is the needto avoid psychologically nega-tive effects (sense of insecuri-ty, anxiety, etc.), which canresult, for example, where thework zone is bordered by awall of darkness.
Lighting as a cost factorAs a production overhead,
the cost of a lighting installa-tion is also a matter of majorsignificance. So aspects suchas energy efficiency, mainte-nance costs and service lifeneed to be assessed. Evensimple lamp replacementoperations can entail highcosts if, for example, the pro-duction process needs to beinterrupted or complex appa-ratus needs to be used. So
when selecting luminaires andlamps, it is worth payingattention to quality standards,maintenance requirementsand service life ratings. At theplanning stage, care shouldbe taken to ensure not onlyoptimal lighting but also con-
venient positioning (access)in the outdoor space.
High requirementsDepending on application,lighting installations need tostand up to extreme environ-mental conditions. Work-places are typically very dirty,dusty, damp and/or wet loca-tions exposed to aggressiveor explosive atmospheres,extremely high or low tempe-ratures and during the day a high incidence of ultraviolet
light due to sunlight. Theseconditions determine thespecial requirements thatluminaires need to meet interms of degree of protection,design or materials used intheir construction. Industrialplant lighting is comprehen-sively covered by standards.But beyond the fulfilment ofstandard requirements, thereare recommendations and
11
Note
Lighting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26Luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
40 41
42
-
8/7/2019 Lighting for Outdoor Workplaces
14/36
12
Industrial plants and power facilities
concepts for harnessing ade-quate lighting to impact posi-tively and significantly on thesense of wellbeing and pro-ductivity of the persons pre-sent.
High lighting levels and suffi-cient cylindrical illuminance inthe task area are also keyrequirements outdoors. Work-place lighting here needs tosatisfy two quality criteria.First, for security reasons, thelevel of lighting needs to be
adequately high, especially inareas where encounters mayoccur, for example, betweenvehicles and pedestrians.Secondly, to guarantee easyrecognition of information,
outdoor area lighting needs tobe particularly effective at limit-ing glare. As a result, asym-metrical reflector luminairesfor high-pressure lamps arethe preferred solution here.These come with high-gradefacetted optics and a flatglass enclosure which ensure
that the light is mostly direc-ted onto the defined workingplane without giving rise toglare. Where lighting is requiredto illuminate large outdoorareas, such as loading bays,
wide-angle flood systems canbe profitably used.
For lighting tasks inside buil-dings, e.g. inside a processplant, linear luminaires withtubular fluorescent lamps anda high degree of protectionare frequently used. In com-
parison to luminaires withhigh-pressure dischargelamps, fluorescent-lampmodels have the advantage ofsignificantly lower luminancealong direct lines of sight.
At chemical and petrochemi-cal plants (refineries, etc.) andonshore or offshore oil andgas production facilities aswell as in mining and otherareas where explosive atmos-pheres may be present, oneimportant aspect of work-
44
45
Self-propelled machines are generally fitted with floodlights
for manoeuvring and for illuminating the work area.
Luminaires mounted on industrial facilities outdoors need to meet
higher requirements in terms of protection against the ingress of dust
and moisture. In some cases, explosion protection is also required.
43
-
8/7/2019 Lighting for Outdoor Workplaces
15/36
place lighting is that the lumi-naires selected as electricalfixtures need to meet therequirements of the relevantexplosion protection classes.
Outdoor switching stationsAt night, the proper operation
of outdoor switching stationscan only be guaranteedwhere artificial lighting permitsall equipment to be quickly,reliably and safely monitored.
The parts of the high-voltagesystem mounted on support-ing structures e.g. busbars,
line links, insulator sets andswitchgear should presentsurfaces to the eye with lumi-nances that allow the opera-ting condition of each elementto be clearly identified. Forinspecting the bushings, oilconservators or protective
equipment in the upper trans-former sections, angled inci-dent light from below is therecommended solution. Com-munication route lightingshould ensure that controlscan be conducted safely. It isessential here to avoid deepand large patches of shadow.
13
Note
Lighting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26Luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Depending on the prevailingambient brightness, systemarrangement clarity andreflectance factors, horizontalilluminance of 15...30 lx isrecommended in order tomeet these requirements. Ver-tical illuminance on the sys-
tem components mentionedshould be in the region of30...60 lx.
Luminaires should be arran-ged so that there is no dangerof contact with high-voltageelements when maintenanceand lamp replacement opera-
tions are carried out. Moun-ting heights should thereforebe kept as low as possible sothat ladders are not needed.
47
The draft standard DIN EN 12464-2 also sets out requirements for general traffic areas at outdoor workplaces.
46
-
8/7/2019 Lighting for Outdoor Workplaces
16/36
14
Transport, roads and routes
Vehicle transport and trafficVehicle transport is part ofdaily life worldwide. The highlydeveloped countries arecovered by a dense networkof roads and motorways.
Public transport routes aside,there are also transport infra-structures in and around largeindustrial complexes whichare used exclusively for plant
operations and thus need tobe regarded as outdoor work-places.
For the safety of those usingsuch infrastructures, road androute lighting must conform tospecific standards based onthe relevant regulations gover-ning lighting for public roadsand routes (e.g. EN 13201).In contrast to many public
transport routes, however,the speed limit on plant roadsmay be 20 km/h or walkingpace, depending on hazardpotential.
Special attention needs to bepaid to traffic interchanges(e.g. intersections, rounda-bouts, bridges...) as well asunderpasses and tunnels,where lighting installations
need to meet very high requi-rements in terms of lightingcharacteristics, reliability andmaintenance. Depending ongeographical location, lumi-naires may need to withstandextreme weather and climaticconditions outdoors a factwhich must be borne in mindwhen products are selected.Vehicle parking facilities arealso outdoor workplaces, so
are railway lines and shippingroutes, which present similarrequirements in terms of light-ing characteristics to e.g. theapron areas of an airport.While the focus in road light-ing is traditionally on criteriasuch as cost-efficiency, relia-bility and maintenance-friend-ly design, a new aspect isbecoming increasingly impor-tant: light immission. This is
the portion of light that radia-tes upwards from a luminaireand could cause an environ-mental nuisance. As a sourceof "light pollution", it shouldbe kept as small as possible.
Main roadsDanger lurks at many pointson main roads, especially attwilight and after dark. Goodroad lighting makes for better
visual conditions for all roadusers and thus heightensroad safety.
Statistics show that standard-compliant road lighting sub-stantially lowers the risk ofaccidents and sharply redu-ces the severity of the acci-dents that occur. Luminaireswith modern specular reflec-tor technology, e.g. radial
facetted optics, in combina-tion with tubular lamps permitwide spacing betweencolumns and thus fewer lumi-naires per kilometre. At thesame time, they avoid pat-ches of darkness and makefor greater road safety.
48
5049
-
8/7/2019 Lighting for Outdoor Workplaces
17/36
15
Note
Lighting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26Luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Traffic interchangesRoundabouts present a trafficsituation that needs a speciallighting concept one thatcalls for vertical illuminance tomake motorists, cyclists andpedestrians clearly visibleand, secondly, couples ade-quately high and uniform illu-minance on the horizontalroad surfaces with good glarelimitation. This is achieved, for
example, by a combination ofprojector-reflector lighting sys-tems positioned at the centreof the roundabout and a rowof other luminaires on theperiphery.
These luminaires come withefficient specular reflectortechnology and flat glassenclosures to minimise glare.They also achieve very good
colour rendering through theuse of metal halide lamps whose light colour, moreover,contrasts with the lighting onthe converging roads andmakes for greater alertness.
Fuel stationsFuel stations are both salesoutlets and work premises.Lighting should draw attentionto the location, the brand of
the product on sale and thenature of the service offeredfrom an adequate distance.
It needs to provide appropri-ate work lighting for the pumpand service areas and shouldclearly identify access routesand exits. As with any lightingdesigned to advertise, atten-tion should be drawn here bycreating a contrast with the
surroundings. Where surroun-dings are generally dark,however, an excessively highlighting level can easilyoverstep the mark betweenconspicuousness and obtru-siveness.
In bright surroundings, thereis less risk of conflict betweenadvertising and the needs ofnearby traffic. Excessively
high luminance of the signsidentifying the fuel station canlead to information beingobscured and details beingmissed.
Luminaire luminance shouldgenerally be low, especiallywhere luminaires are posi-tioned close to the edge ofunlit roads.
Road luminaires for accessand exit lighting should beselected from the range of"shielded" luminaires. A tran-quil picture overall is achievedwith luminaires at low mount-ing heights, e.g. bollard lumi-naires. Very low luminance isproduced by indirect lighting,for example illuminating theunderside of a cantilevercanopy.
Emphasizing facades in thefuel station area lends visualappeal, makes for an inte-grated impact and indicatesa facility ready for service.
51
52
-
8/7/2019 Lighting for Outdoor Workplaces
18/36
Generally speaking, the hori-zontal luminance required is20...50 lx and the uniformityUo 0.25. Preferred light
sources are sodium vapourlamps low-pressure modelswhere colour recognition isnot required, 400 W or1.000 W high-pressuresodium vapour lamps as arule for high-mast systems.In areas where high require-ments need to be met forcolour recognition, metal hali-de lamps are used. For ope-rator control lighting, attentionneeds to be paid to high verti-cal illuminance. Supplementa-ry lighting is required for char-
ging and discharging facilitiesas well as for loading points.
So, for all mobile port facilitiessuch as mobile bridges, tra-velling and slewing cranes inthe loading area, dynamiclighting is an appropriatechoice. Static lighting tendsto direct attention to buildingsand highlight them. Becauseof the low general lightinglevel, direct glare needs tobe limited in the direction ofthe control and monitoring
stations. Projectors andfloods should always bedirected away from operatingpersonnel.
16
Transport, roads and routes
Canals, locks andport installationsPort areas need to be illumi-nated at night to permit
round-the-clock operationsand minimize the time vesselsspend in port. What is requi-red here is outdoor facilitylighting designed for extraglare limitation on the waterside to ensure no interferencewith shipping traffic.
Cargo-handling facilitiescan be divided into twocategories:
Small areas for generalcargo, which can be
illuminated by a conven-tional peripheral arrange-ment of luminaires, i.e.using road luminaires orwide angle projectors orfloods at mounting heightsup to 12 m;
Large-scale containerterminals, served byhigh-mast systems withprojectors or floods andmounting heights between25 and 35 m. These permitconsiderable leeway inpositioning, allowing lumi-
naires to be spaced bet-ween 100 and 175 mapart. Uniform illuminationof large areas coupledwith good glare limitationcalls for projectors withhorizontal diffuser panelsand 60 beam angling tothe vertical.
53
54
55
-
8/7/2019 Lighting for Outdoor Workplaces
19/36
Port cargo-handling areasOne lighting option for portcargo-handling areas is toerect a mast at each end ofthe crane rails so that the lightfrom the floods mounted onthem can reach between therows of wagons. When selec-ting crane lights, account
needs to be taken of thevibrations to which lampswill be exposed. Furthermore,ports shape the face of citiesand emphasize their structures.When night descends, a light-ing control program can makethe importance and role of theport visible and thus forge avisual and emotional link withthe city. Port operationsestablish a presence duringthe day, illumination takesover the task at night. Thelighting requirements for the
outdoor area are the same asfor outdoor workplaces.
AirportsLighting for airport aprons,i.e. the areas at gates whereaircraft park, needs to meetparticularly high requirements,a key one being that pilotsmust never be dazzled. Whenthey touch down after a nightflight, their eyes are adaptedto the dark and extremelysensitive to high luminance.At the same time, large areas
need to be illuminated as uni-formly as possible. Large pro-jector-reflector lighting sys-tems are the solution here.Thanks to their special light-
distributing mirrors, thesehigh-performance floods notonly spread light over a widearea; they also avoid glare.An alternative solution is touse asymmetrical floods,which should be installedand angled so that there isno possibility of their lamps
being directly visible fromthe cockpit.
The purpose of airport apronlighting is to provide guidance for
the pilots of taxiing aircraft, to help ensure efficient
and reliable passenger,baggage and freighthandling operations,
to facilitate service andmaintenance work
to support surveillanceand security.
Basically speaking, the taskfor the lighting planner is toprovide sufficient illuminance i.e. 5...50 lx horizontally andvertically 2 m above theground for a large outdoorarea.To guarantee adequaterecognition and colour visionat aircraft stands, the averagevertical illuminance thereshould be 20 lx and the mini-mum vertical illuminance nolower than 5 lx. Other special
factors to consider are:
Air controllers in the controltower must not be dazzled.
The pilot, who in a modern
jumbo aircraft may be asmuch as 10 m above theground, must not bedazzled.
The lighting masts mustnot interfere with flightoperations or traffic on theground, i.e. positioning isrestricted and heights may
not exceed 25 m withoutspecial approval.
Systems normally featurewell-shielded floods fittedeither with particularly cost-efficient high-pressure sodiumvapour lamps or metal halidelamps.
17
Note
Lighting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26Luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Railway installationsIn yards and along track, ope-rational safety and reliability oflighting installations is a majorconsideration. The luminairesdeployed here need to beglare-suppressed to a parti-cularly high standard. Thisguarantees a high degree of
security for operating person-nel.In railway yards, a great dealof the information for opera-tions is conveyed by light sig-nals. If the lighting is wrong,that information may be mis-sed or misinterpreted.At level crossings, asymmetri-cal luminaires with instant hotre-igniters are used. This per-mits optimal video surveillancefrom the control centre.In stations or on station plat-forms, good lighting helps
people get their bearings andbrightness makes for greatersafety.
56 57
-
8/7/2019 Lighting for Outdoor Workplaces
20/36
18
Storage and logistics
monitoring system. Only partof an outdoor work lightingsystem, for example, can beused for security purposes.Supplementary floods permit-ting efficient operations
through the night can also beprovided. Here, high verticalilluminance from the perspec-tive of the security guard isuseful. Another solution isperiphery lighting, whereguards remain in the darkwhile intruders are exposedto dazzling floodlight. Insidethe customary fence, floodswith a wide horizontal beamare mounted on low mastsat regular intervals. Both the
Areas where no actual workis performed require only lowlevels of lighting for safemovement of people andvehicles, for security surveil-lance of the site or for fire
detection monitoring. Here,it is particularly importantthat camouflaging shadowsshould be avoided by carefulplanning of light incidenceangles. Experience hasshown that the use of brightdurable coatings or specialreflective surfaces to highlighthazard zones is a good idea.Lighting that is intended solelyfor securing property can bedesigned as a dedicated
58
59 60
61 62
-
8/7/2019 Lighting for Outdoor Workplaces
21/36
19
periphery and the approachzone are thus fully illuminatedto a reasonable depth.
In practice, the vertical illumi-nance required around 1 mabove the ground in the apronarea is between 5 and 30 lx,depending on the lighting forthe protected site. If risk levelsare high, it is advisable todouble-lamp luminaires andconnect them to two separatesupply circuits. Where a peri-pheral lighting system of thiskind is installed, however,care must be taken to ensurethat there is no risk of lightdisturbing or causing pro-
blems for occupants of neigh-bouring properties and thatroad safety is not compromi-sed. It is advisable to seek theapproval of the relevant publicagencies and authorities.
Transfer areasFor security reasons, specialimportance needs to be atta-ched to warehouse entranceand exit lighting. Lightingsolutions here must ensurea smooth transition betweenthe levels of brightness inside
and outside the building. Inmany cases, it is also neces-sary to take account of areaswhere traffic is static, e.g.nearby car parks, and accessroutes. Glare suppression andreduction is an issue here,and projector-reflector(secondary reflector) systemscan play an important part inachieving it. Light immissionshould also be kept to aminimum.
Goods-handling
operations at nightIn yards where goods-hand-ling operations are conductedat night, work areas are nor-mally in the immediate vicinity
of the loading and transportfacilities. However, it would bewrong to confine lighting tothese areas. The correct solu-
tion is to provide work zoneswith an appropriate level ofsupplementary task lighting inaddition to the general lightingfor the site. Portal and bridgecrane work areas are anexample often cited here.As a rule, the crane supportsprovide useful mounting sitesfor floodlights, so light inci-dence is perpendicular to thedirection of travel. The illumi-nance required within theoperating range of the craneis achieved using luminaires
mounted on the bridge of thecrane. Where light incidenceis from the side, crane bayswith siding track may requirefurther supplementary lightingto dispel shadows cast byrolling stock superstructures.
Supplementary lightingfor loading pointsFor operator control lighting,attention needs to be paid tohigh vertical illuminance. Sup-plementary lighting is requiredfor charging and discharging
facilities as well as for loadingpoints. So, for all mobile portfacilities such as mobilebridges and travelling andslewing cranes in the loadingarea, dynamic lighting is anappropriate choice. Staticlighting tends to direct atten-tion to buildings and highlightthem.
Limiting direct glareBecause of the low generallighting level, direct glareneeds to be limited in the
direction of control and moni-toring stations. Projectors andfloods should always bedirected away from operatingpersonnel.
Note
Lighting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26Luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
64
63
-
8/7/2019 Lighting for Outdoor Workplaces
22/36
20
Construction sites
Construction sitesIlluminance should be selec-ted according to table 5.3.Key considerations for con-
struction site lighting are thetemporary nature of the needfor lighting, the need to adaptthe lighting to changing activi-ties, and the variety of visualtasks. Flexibility is achievedby facilities such as transport-able, extendable lightingmasts, which often comemounted on a trailer with agenerator. Constructioncranes can be another tool ofsite lighting design. From thevantage of the crane operator,the entire working area (hori-
zontal and vertical) should beilluminated so that loads areclearly visible at the full wor-king height. It is commonpractice for floods to bemounted on the crane tower,nowadays also on the jib.Correct positioning in relationto the cabin can ensure thatglare is avoided for the opera-tor. Attention should also bepaid to creating form sha-dows on objects in order tomake for sharper contrasts.
On large construction sites,work often extends beyondthe hours of daylight. In civilengineering projects, it ishighly undesirable for parts oflighting systems such as sup-porting structures, masts,overhead/underground cablesand distribution cabinets tobe scattered around the site.They obstruct site traffic andhinder construction work. Thepreferred solution here isfloodlighting from points out-side the site, although supple-
mentary local lighting mayalso be needed for buildingpits, dam structures or otherareas which cannot be pro-perly illuminated by the flood-lights. Warning lights are alsoessential to identify hazardousareas.
65
66
67
-
8/7/2019 Lighting for Outdoor Workplaces
23/36
Arrangement of luminaires:Wherever possible, no lumi-
naires should be positioned inthe actual area where manpo-wer and machines work. Aswork areas often change,mobile lighting directedinwards from the perimeter is useful. Generally speaking,in addition to the measuresmentioned above, the mobilityrequired can be achievedeither with small mobile lumi-naires or with adjustablefloods on high masts.
21
Note
Lighting tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26Luminaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Securing site trafficTo make traffic safe and pro-
tect site workers, constructionsites are secured from anappropriate distance by spe-cial identification and orienta-tion lighting. Road users arewarned of approachinghazard zones by dynamiclight signals, normally coupledwith a reduced speed limit.
Luminaires usedFor comparatively small con-
struction sites, floods fortungsten halogen lamps orhigh-pressure dischargelamps are an option. For lar-ger sites, these are supple-mented inside buildings byluminaires with tubular fluo-rescent lamps (luminaires fordamp interiors).
The degree of protection ofthe luminaires should be at
least IP 54. When choosingluminaires, always make suretheir enclosure is made of animpact-resistant material. It isalso recommended that lumi-naires should be mechanicallyprotected by a wire meshshield.
68
-
8/7/2019 Lighting for Outdoor Workplaces
24/36
22
Lighting tables
Table 5.5 Farms
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.5.1 Farm yards 20 0,10 55 20
5.5.2 Equipment shed (open) 50 0,20 55 20
5.5.3 Animal sorting pen 50 0,20 50 40
Table 5.2 Airports
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks1. Direct light in the direction of
the control tower and landing
aircraft should be avoided
2. Direct light emitted above the
horizontal by floodlights should
be kept to a minimum
5.2.1 Hangar apron 20 0,10 55 205.2.2 Terminal apron 30 0,20 50 40
5.2.3 Loading areas 30 0,20 50 40 For reading labels:
m=50 lx
5.2.4 Fuel depot 50 0,20 50 40
5.2.5 Aircraft maintenance stands 200 0,50 45 60
Table 5.1 General circulation areas at outdoor workplaces
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.1.1 Walkways exclusively for pedestrians 5 0,25 50 20
5.1.2 Traffic areas for slowly moving vehicles (max. 10 km/h),
e.g. bicycles, trucks and excavators 10 0,40 50 205.1.3 Regular vehicle traffic (max. 40 km/h) At shipyards and in docks,
20 0,40 45 20 GRL may be 50
5.1.4 Pedestrian passages, vehicle turning, For reading labels:
loading and unloading points 30 0,40 50 20 m =50 lx
Note: For routes, as there are no international standards, consult the appropriate road lighting recommendations.
Table 5.3 Building sites
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.3.1 Clearance, excavation and loading 20 0,25 55 20
5.3.2 Construction areas, drain pipes mounting,
transport, auxiliary and storage tasks 50 0,40 50 20
5.3.3 Framework element mounting, light reinforcement
work, wooden mould and framework mounting,
electric piping and cabling 100 0,40 45 405.3.4 Element jointing, demanding
electrical, machine and pipe
mountings 200 0,50 45 40
Table 5.4 Canals, locks and harbours
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.4.1 Waiting quays at canals and locks 10 0,25 50 20
5.4.2 Gangways and passages exclusively for pedestrians 10 0,25 50 20
5.4.3 Lock control and ballasting areas 20 0,25 55 20
5.4.4 Cargo handling, loading and unloading 30 0,25 55 20 For reading labels:
m=50 lx
5.4.5 Passenger areas in passenger harbours 50 0,40 50 20
5.4.6 Coupling of hoses, pipes and ropes 50 0,40 50 20
5.4.7 Dangerous parts of walkways and driveways 50 0,40 45 20
-
8/7/2019 Lighting for Outdoor Workplaces
25/36
23
Table 5.7 Industrial sites and storage areas
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.7.1 Short-term handling of large units and raw materials, 20 0,25 55 20
loading and unloading of solid bulk goods
5.7.2 Continuous handling of large units and raw materials, 50 0,40 50 20
loading and unloading of freight, lifting and descending
location for cranes, open loading platforms
5.7.3 Reading of addresses, covered loading platforms, 100 0,50 45 20
use of tools, ordinary reinforcement and casting
tasks in concrete plants5.7.4 Demanding electrical, machine and Use local
piping installations, inspection 200 0,50 45 60 lighting
Table 5.8 Offshore gas and oil structures
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.8.1 Sea surface below the rig 30 0,25 50 20
5.8.2 Ladders, stairs, walkways 100 0,25 45 20 On treads
5.8.3 Boat landing areas / transport areas 100 0,25 50 20
5.8.4 Helideck 100 0,40 45 20 1. Direct light in the direction of
the control tower and landing
aircraft should be avoided
2. Direct light emitted above the
horizontal by floodlights should
be kept to a minimum5.8.5 Derrick 100 0,50 45 40
5.8.6 Treatment areas 100 0,50 45 40
5.8.7 Pipe rack area/ deck 150 0,50 45 40
5.8.8 Test station, shale shaker, wellhead 200 0,50 45 40
5.8.9 Pumping areas 200 0,50 45 20
5.8.10 Life boat areas 200 0,40 50 20
5.8.11 Drill floor and monkey board 300 0,50 40 40 Special attention to string
entry is needed.
5.8.12 Mud room, sampling 300 0,50 40 40
5.8.13 Crude oil pumps 300 0,50 45 40
5.8.14 Plant areas 300 0,50 40 40
5.8.15 Rotary table 500 0,50 40 40
Table 5.6 Fuel filling stations
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.6.1 Vehicle parking and storage areas 5 0,25 50 20
5.6.2 Entry and exit driveways: dark environment
(i.e. rural areas and suburbs) 20 0,40 45 205.6.3 Entry and exit driveways: light environment (i.e. cities) 50 0,40 45 20
5.6.4 Air pressure and water checking points and other service areas 150 0,40 45 20
5.6.5 Meter reading areas 150 0,40 45 20
Table 5.9 Parking areasRef. no. Art des Bereiches, der Aufgabe oder Ttigkeit m lx Uo GRL Ra Remarks5.9.1 Light traffic, e.g. parking areas of shops, terraced and
apartment houses, cycle parks 5 0,25 55 20
5.9.2 Medium traffic, e.g. parking areas of department stores,
office buildings, plants, sports and multipurpose
building complexes 10 0,25 50 20
5.9.3 Heavy traffic, e.g. parking areas of schools, churches,
major shopping centres, major sports and multipurpose
building complexes 20 0,25 50 20
-
8/7/2019 Lighting for Outdoor Workplaces
26/36
24
Lighting tables
Table 5.11 Power, electricity, gas and heat plants
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.11.1 Pedestrian movements within electrically safe areas 5 0,25 50 20
5.11.2 Handling of service tools, coal 20 0,25 55 205.11.3 Overall inspection 50 0,40 50 20
5.11.4 General servicing work and reading of instruments 100 0,40 45 40
5.11.5 Wind tunnels; servicing and maintenance 100 0,40 45 40
5.11.6 Repair of electrical devices 200 0,50 45 60 Use local
lighting
Table 5.12 Railways and tramways
Ref. no. Type of area, task or activity m lx Uo GRL Ra RemarksRailway areas including light railways, tramways, Avoid glare for
monorails, miniature rails, metro, etc. vehicle drivers
5.12.1 Tracks in passenger station areas, including stabling 10 0,25 50 20 Ud 1/8
5.12.2 Railway yards: flat marshalling, retarder and classification yards 10 0,40 50 20 Ud 1/5
5.12.3 Hump areas 10 0,40 45 20 Ud 1/5
5.12.4 Freight track, short duration operations 10 0,25 50 20 Ud 1/85.12.5 Open platforms, rural and local trains, 1. Special attention to
small number of passengers 15 0,25 50 20 the edge of the platform.
2. Ud 1/8
5.12.6 Walkways 20 0,40 50 20
5.12.7 Level crossings 20 0,40 45 20
5.12.8 Open platforms, suburban and regional trains with large 1. Special attention to
number of passengers or inter-city services with small the edge of the platform.
number of passengers 20 0,40 45 20 2. Ud 1/5
5.12.9 Freight track, continuous operation 20 0,40 50 20 Ud 1/5
5.12.10 Open platforms in freight areas 20 0,40 50 20 Ud 1/5
5.12.11 Servicing trains and locomotives 20 0,40 50 40 Ud 1/5
5.12.12 Railway yard handling areas 30 0,40 50 20 Ud 1/5
5.12.13 Coupling area 30 0,40 45 20 Ud 1/5
5.12.14 Stairs, small and medium-size stations 50 0,40 45 40
5.12.15 Open platforms, inter-city services 50 0,40 45 20 1. Special attention tothe edge of the platform
2. Ud 1/5
5.12.16 Covered platforms, suburban and regional trains or 1. Special attention to
inter-city services with small number of passengers 50 0,40 45 40 the edge of the platform.
2. Ud 1/5
5.12.17 Covered platforms in freight areas, short duration operations 50 0,40 45 20 Ud 1/5
5.12.18 Covered platforms, inter-city services 100 0,50 45 40 1. Special attention to
the edge of the platform.
2. Ud 1/3
5.12.19 Stairs, large stations 100 0,50 45 40
5.12.20 Covered platforms in freight areas, continuous operation 100 0,50 45 40 Ud 1/5
5.12.21 Inspection pit 100 0,50 40 40 Use low-glare local lighting
Table 5.10 Petrochemical and other hazardous industries
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.10.1 Handling of service tools, utilisation of manually
regulated valves, starting and stopping motors,
lighting of burners 20 0,25 55 205.10.2 Filling and emptying of container trucks and wagons
with risk-free substances, inspection of leakage,
piping and packing 50 0,40 50 20
5.10.3 Filling and emptying of container trucks and wagons
with dangerous substances, replacement of pump packing,
general service work, reading of instruments 100 0,40 45 40
5.10.4 Fuel loading and unloading sites 100 0,40 45 20
5.10.5 Repair of machines and electric devices 200 0,50 45 60 Use local
lighting
-
8/7/2019 Lighting for Outdoor Workplaces
27/36
25
Table 5.13 Saw mils
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.13.1 Timber handling on land and in water,
sawdust and chip conveyors 20 0,25 55 20
5.13.2 Sorting of timber on land or in water, timber unloadingpoints and sawn timber loading points, mechanical
lifting to timber conveyor, stacking 50 0,40 50 20
5.13.3 Reading of addresses and markings of sawn timber 100 0,40 45 40
5.13.4 Grading and packaging 200 0,50 45 40
5.13.5 Feeding and stripping and chopping machines 300 0,50 45 40
Table 5.15 Water and sewage plants
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.15.1 Handling of service tools, utilisation of manually
operated valves, starting and stopping of motors,
piping packing and raking plants 50 0,40 45 20
5.15.2 Handling of chemicals, inspection of leakage,
changing of pumps, general servicing work,
reading of instruments 100 0,40 45 40
5.15.3 Repair of motors and electric devices 200 0,50 45 60
Table 5.14 Shipyards and docks
Ref. no. Type of area, task or activity m lx Uo GRL Ra Remarks5.14.1 General lighting of shipyard area, storage areas
for prefabricated goods 20 0,25 55 40
5.14.2 Short term handling of large units 20 0,25 55 20
5.14.3 Cleaning of ship hull 50 0,25 50 20
5.14.4 Painting and welding of ship hull 100 0,40 45 60
5.14.5 Mounting of electrical and mechanical components 200 0,50 45 60
-
8/7/2019 Lighting for Outdoor Workplaces
28/36
26
Lamps
The principal selection criteriafor road lighting lamps are energybalance (luminous efficacy) andservice life. Closely connected
with these is the decision onwattage (W). Light colour andcolour rendering properties areless important here than forinteriors (see page 8).
Luminous efficacyLuminous efficacy is the measureof a lamp's efficiency, expressedin lumens (lm) per watt: the higherthe ratio of lumens to watts, themore light a lamp produces fromthe energy it consumes. Anordinary tungsten filament lampgenerates only 12 lm/W, where-
as the luminous efficacy ofdischarge lamps is several timeshigher (see table). Dischargelamps operated by electronicballasts achieve even greaterefficiency.
Service lifeService life is the length of timea lamp is operated before it be-comes unserviceable. Averageservice life is defined as theaverage electrical service life(survival rate) of a number oflamps operated under standard
conditions. Manufacturerspublish service life ratings,indicating the switching rhythmand the failure rate on whichthey are based.
Lamp type 1 2 3 4 5 6 7
Features Type of lamp High-pressure sodium Metal halide
Power rating classes from 50 35 50 70 250 1000 35
(Watt) to 1 000 1000 400 400 2000 2000 1000
Luminous flux from 4 400 2200 4000 6800 20000 90 000 2850
(Lumen) to 130 000 130 000 55 000 48 000 240 000 230 000 100 000
Luminous efficacy from 70 63 66 80 80 86 74
(Lumen/Watt) to 150 139 138 120 120 115 100
Light colour ww ww ww ww nw, dw nw, dw ww, nw, dw
Colour rendering index
-
8/7/2019 Lighting for Outdoor Workplaces
29/36
27
8 9 10 11 12 13 14 15 16 17 18 19 20 21
Mercury LP sodium Tubular three-band Compact fluorescent Induction
vapour fluorescent
70 35 60 70 50 18 18 18 18 5 60 18 554) 70
250 250 140 400 1000 180 58 58 58 70 120 803) 1654) 150
5 600 3 100 6 850 5100 1600 1800 1 350 1350 1350 250 4 000 1 200 3650 6500
22500 25000 16500 37 000 58 000 32000 5 150 5150 5200 5200 9 000 6 000 12 000 12 000
80 85 114 73 32 100 75 75 75/811) 50 67 67 644) 754)
90 100 118 100 60 178 89 89 93/1001) 82 75 87 734) 794)
ww ww, nw ww ww, nw ww, nw ww, nw, dw ww, nw, dw ww, nw, dw ww, nw ww, nw ww, nw ww, nw ww, nw
8085 8095 6070 7596 36, 4560 8085 8085 80 85 8085 8085 8085 80 85
E27 G12, G22 PGZ12 Fc2 E27 BY22d G13 G13 G13 G23 2G8-1 2G11 special special
E40 E40 RX7s E40 G24, 2G7
GX24
daylight white (colour temperature over 5,300 K)
2 W and from 58 W to 50 W. 2) 1855 W also as special design for outdoor lighting 3) 40 W and 55 W only with EB 4) System (lamp + EB)
13
18
18
20
19 21
11
1012
9
ellipsoid
tubular
longlife
26mm
elongate
d2
)
3-or4-tubelamp
bulb-sha
ped
ring-shaped
TorE(ceramic)
T(ceram
ic)
T(ceram
ic)
withbaseatbothends
(quartzo
rceramic)
longlife
38mm,
forlowtemperatures
fluoresce
ntlamp
26mm
1,2-and
illustrated
3-tubela
mp
When individual lamps fail,road safety is compromised.So spent lamps should be
replaced immediately. Groupreplacement intervals aredetermined by the failure ratetolerated. This is normally 5%.
The longer a lamp operatesbefore it needs to be replaced,the lower the cost of relampingand maintenance. Detailedcomparative data on the servicelife of discharge lamps is avail-able from the electric lampdivision (Fachverband Elektri-sche Lampen) of the Germanelectrical and electronic manu-
facturers' association ZVEI.
-
8/7/2019 Lighting for Outdoor Workplaces
30/36
28
Luminaires
Luminaire selection is determined by the lighting requirementsof the lighting task as well as by mechanical and electricalrequirements and the design intent.
It makes good economic sense to choose quality luminaires.Key features of their design and manufacture are:
cost-efficient operation (high utilisation factors) lighting quality and functionality (VDE, ENEC), mechanical and electrical reliability, long life (materials, finish, compact design), in-process quality control, simple assembly and maintenance-friendly design
Professional advice and planning aids are also significantfeatures.
Pendant luminaires for suspension on catenary (overhead) wires for
A1, A2, A3 or B1 roads
Figs. 69 + 70
Post-top luminaires for A1, A2, A3 or B1 roads
Side-entry luminaires, a preferred option for A1, A2, A3 or B1 roads
Post-top luminaire (left) with fluorescent lamps for A1, A2, A3 or B1
roads and as wall luminaire (right) e.g. for paths
Figs. 71 + 72
Figs. 75 + 76
Figs. 79 + 80
Large-area luminaire, used e.g. for outdoor car park lighting
Luminaire with light distribution curve specially designed forpedestrian crossings
Figs. 73 + 74
Figs. 77 + 78
Figs. 81 + 82
Tunnel luminaires with special light distribution curve and higher
degree of protection.
-
8/7/2019 Lighting for Outdoor Workplaces
31/36
29Frdergemeinschaft Gutes Licht
Path luminaires, a preferred option for D and E lighting situation
roads as well as for parks and gardens
Figs. 85 + 86
Decorative column luminaires, a preferred option for D and E
lighting situation roads as well as for parks and gardens
Figs. 83 + 84
Secondary luminaires (also: indirect luminaires), a preferred option
for D and E lighting situation roads as well as for parks and gardens
Small floods and spots for object illumination; the spot on the rightintegrates well in facades
Figs. 87 + 88
Figs. 91 + 92
Recessed ground luminaires (left) for object illumination and
accentuating lighting as well as orientation luminaires (right)
as recessed wall lights
Projector luminaires for spot- (left) and floodlighting (right).
Figs. 89 + 90
Figs. 93 + 94
-
8/7/2019 Lighting for Outdoor Workplaces
32/36
30
Standards and literature
DIN EN 12464-2 Light and lighting Lighting of work places Part 2: Outdoor work places
DIN 13201 Road lighting - Part 1: Selection of lighting classes
DIN EN 13201 Road lightingPart 2: Performance requirementsPart 3: Calculation of performancePart 4: Methods of measuring lighting performance
DIN 5340 Terms for physiological optics
DIN 67523 Lighting of pedestrian crossings (sign 293StVO)with additional lightingPart 1: General characteristics and guide valuesPart 2: Calculation and measurement
R-FG 2001 Richtlinien fr die Anlage und Ausstattungvon Fugngerberwegen, published in Verkehrsblatt
(VkBl) 2001, page 474 (www.verkehrsblatt.de)
Guide for lighting of road tunnels and underpasses,CIE publication 88 (2nd edition), Vienna 204(www.cie.co.at/cie)
Conflict zones: (in German). Allgemeines Rundschreiben frden Straenbau 23/98 of the Federal Transport Ministry (BMV)
Life behaviour of discharge lamps for general lighting,Fachverband Elektrische Lampen im ZVEI ZentralverbandElektrotechnik- und Elektronikindustrie (ZVEI) e.V.,Frankfurt am Main 2005 (www.zvei.org)
Straenbeleuchtung und Sicherheit, publication no.
17:1998, Deutsche Lichttechnische Gesellschaft (LiTG) e.V.,Berlin 1998 (www.litg.de)
Messung und Beurteilung von Lichtimmissionenknstlicher Lichtquellen, publication no. 12.2:1996, DeutscheLichttechnische Gesellchaft (LiTG) e.V., Berlin 1996(www.litg.de)
Hinweise zur Messung und Beurteilung vonLichtimmissionen, Beschluss des Lnderausschusses frImmissionsschutz (LAI) resolution of 10 May 2000(www.lai-immissionsschutz.de)
Zur Einwirkung von Auenbeleuchtungsanlagen aufnachtaktive Insekten, publication no. 15:1997, Deutsche
Lichttechnische Gesellschaft (LiTG) e.V., Berlin 1997(www.litg.de)
96
95
-
8/7/2019 Lighting for Outdoor Workplaces
33/36
97 98
99 100 101
102 103 104
Acknowledgements for photographs
Made available by members of FrdergemeinschaftGutes Licht: 1, 11-14, 19, 20, 23, 24, 27, 30-33, 37, 42, 46-50,52, 54-56, 58, 62, 69-94, 95, 96, 98-100, 102, 103Aral Aktiengesellschaft: 2, 51
BGZ Berufsgenossenschaftliche Zentrale fr Sicherheitund Gesundheit: 8duisport, Kppen: 4E.ON Ruhrgas AG: Titel, 38Gnter Wicker (Photur),/Berliner Flughfen: 3Hafen Hamburg Marketing/Hettchen: 62Stadt Paderborn: 15TRUST Communication GmbH: 16, 17, 26, 28, 29www.fotolia.de: 5, 22 (Gilles Cohen); 6, 67 (Pryzmat);9 (Leah Thompson); 18 (Georg Tschannett); 21 (Holger Zander);25/26 (Tom Perkins); 35 (Maiai); 39 (Zsolt Nyulaszi);40 (dwphotos); 41, 97 (Dominique Morel); 45 (Jim Parkin);53 (Michael Wilkens); 59 (Sascha Burkard); 60 (pmphoto);61 (Erik Rosenbladt); 63 (bedo); 64, 104 (Christian Kowalczyk)www.morguefile.com: 7 (dantada)
www.photocase.de: 10, 43 (nonuniform);34 (triple seVen-designs); 36 (Tasker); 44 (MFO); 57 (photoraver);65, 101 (froodmat); 68 (Baergt)
Numbering of photoson back page:
Postage
stamp
Postcard
Frdergem
einschaft
GutesLicht
Postfach701261
60591FrankfurtamMain
Germany
From
Name,Company,Office
Department
c/o
AddressorP.O.Box
City,PostalCode
12/07/15/13I
ThelistedbookletsareavailableinEnglish
onlyaspdffiles,
downloadfreeofchargeatwww.all-about-lighting.org:
1
LightingwithArtificialLight
(7/04)
2Good
LightingforSchoolsandEducationalEstablishments
(7/03)
3
Road
s,PathsandSquares
(5/07)
4
Good
LightingforOfficesandOfficeBuildings
(1/03)
6
Good
LightingforSalesandPresentation
(2/02)
7Good
LightingforHealthCarePremises
(4/04)
8Good
LightingforSportsandLeisureFacilities
(9/01)
11Good
LightingforHotelsandRestaurants
(2/05)
12
LightingQualitywithElectronics
(5/03)
13
Outdoorworkplaces
(12/07)
16
Urbanimagelighting
(4/02)
17
LEDLightfromtheLightEmittingDiode
(5/06)
18Good
LightingforMuseums,GalleriesandExhibitions
(3/07)
-
8/7/2019 Lighting for Outdoor Workplaces
34/36
Publisher:
Technicalconsultant:
Overall design:
Image editing:
DTP:
Printed by:
Acknow-ledgements:
DIN-EN standards:
DIN-VDE standards:
ISBN:
Reprints:
Imprint
his booklet is No. 13 in the seriesInformation on LightingApplications published by
Frdergemeinschaft Gutes Licht to
provide practical information on goodartificial lighting. The titles of all thepublications in the series are listedopposite in numerical order.
FrdergemeinschaftGutes LichtStresemannallee 1960596 Frankfurt am MainGermanyphone: +49 69 6302-0fax: +49 69 6302-317e-mail: [email protected]: www.licht.de
Frdergemeinschaft Gutes Licht
TRUST Communication GmbH,
Paderborn
TRUST Communication GmbH,Paderborn
TRUST Communication GmbH,Paderborn
Westermann Druck GmbH,Braunschweig
The booklets in this series containreferences to current DIN standardsand VDE stipulations.
Beuth Verlag GmbH10787 Berlin, Germany
VDE-Verlag10625 Berlin, Germany
978-3-926193-36-0
With the permissionof the publishers.12/07/00/13E
Printed on chlorine-freebleached paper.
13T
ThelistedbookletsareavailableinEnglishonlyaspdffiles,
downloadfreeofchargeatw
ww.all-about-lighting.org:
1LightingwithArtificialLight
(7/04)
2GoodLightingforSchoolsandEducationalEstablishments
(7/03)
3Roads,PathsandSquares
(5/07)
4GoodLightingforOfficesandOfficeBuildings
(1/03)
6GoodLightingforSalesandPresentation
(2/02)
7GoodLightingforHealthCarePremises
(4/04)
8GoodLightingforSportsandLeisureFacilities
(9/01)
11GoodLightingforHotelsandRestaurants
(2/05)
12LightingQualitywithElectronics
(5/03)
13Outdoorworkplaces
(12/07)
16Urbanimagelighting
(4/02)
17LEDLightfromtheLightEmittingDiode
(5/06)
18GoodLightingforMuseums,GalleriesandE
xhibitions
(3/07)
Bestellung
BitteliefernSieohneweitereNebenkostendie
bezeichnetenHefte(E
=availableinEnglish,download
freeofchargeatwww.all-about-light.org):
Heft-Nr./Titel
Stck
1DieBeleuchtungmitknstlichemLicht(2004)
E
9,
2GutesLichtfrSchulenundBildungsst
tten(2003)
E
9,
3Straen,WegeundPltze(2007)
E
9,
4GutesLichtfrBrosundVerwaltungsgebude(2003)
E
9,
5GutesLichtfrHandwerkundIndustrie(1999)
9,
6GutesLichtfrVerkaufundPrsentation
(2002)
E
9,
7GutesLichtimGesundheitswesen(2004
)
E
9,
8GutesLichtfrSportundFreizeit(2001)
E
9,
9ReprsentativeLichtgestaltung(1997)
9,
10Notbeleuchtung,Sicherheitsbeleuchtung
(2000)
9,
11GutesLichtfrHotellerieundGastronom
ie(2005)
E
9,
12BeleuchtungsqualittmitElektronik(2003)
E
9,
13ArbeitspltzeimFreien(2007)
E
9,
14IdeenfrGutesLichtzumWohnen(2000)
9,
16StadtmarketingmitLicht(2002)
E
9,
17LEDLichtausderLeuchtdiode(2005)
E
9,
18GutesLichtfrMuseen,Galerien,Ausstellungen(2006)
E
9,
Lichtforum
kostenlos
Heft15istvergriffen.
Ort
Datum
Ste
mpel/Unterschrift
-
8/7/2019 Lighting for Outdoor Workplaces
35/36
Frdergemeinschaft Gutes Licht publications
Frdergemeinschaft Gutes Licht (FGL)provides information on the advantages ofgood lighting and offers extensive materialon every aspect of artificial lighting and its
correct usage. The information is impartialand based on current DIN standards andVDE stipulations.
Information on lighting applicationsThe booklets 1 to 18 in this series ofpublications are designed to help anyonewho becomes involved with lighting planners, decision-makers, investors toacquire a basic knowledge of the subject.This facilitates cooperation with lightingand electrical specialists. The lightinginformation contained in all thesebooklets is of a general nature.
LichtforumLichtforum is a specialist periodicalfocusing on topical lighting issues andtrends. It is published at irregularintervals. Lichtforum is available only inGerman.
www.all-about-light.orgOn the Internet, FGL offers tips on correctlighting for a variety of domestic andcommercial "Lighting Applications". In aPrivate Portal and a Pro Portal atwww.all-about-light.org, numerous exam-ples of applications are presented.
Explanations of technical terms are alsoavailable at the click of a mouse on thebuttons "About Light" and "Lighting Tech-nology". Databases containing a wealthof product data, a product/supplier matrixand the addresses of FGL membersprovide a direct route to manufacturers."Publications" in an online shop and"Links" for further information round offthe broad spectrum of the FGL lightportal.
Die Beleuchtungmit knstlichem Licht1
Gutes Licht frSport und Freizeit 8
Gutes Licht fr Verkaufund Prsentation 6
Gutes Licht frHandwerk und Industrie 5
Beleuchtungsqualittmit Elektronik12Gutes Licht fr Hotellerieund Gastronomie11NotbeleuchtungSicherheitsbeleuchtung10ReprsentativeLichtgestaltung9
Gutes Lichtam Haus und im Garten 15 Stadtmarketing mit Licht16Ideen fr Gutes Lichtzum Wohnen14
Booklet 15 is out of print.
Gutes Licht fr Schulenund Bildungssttten2
Gutes Licht im Gesundheits-wesen 7
Gutes Licht fr Brosund Verwaltungsgebude 4
LED Lichtaus der Leuchtdiode17 Gutes Licht fr Museen,Galerien, Ausstellungen18
Gutes Licht fr die Arbeit im Freien
licht.wissen 13
-
8/7/2019 Lighting for Outdoor Workplaces
36/36
licht.wissen 13Outdoor Workplaces
licht.deFrdergemeinschaft Gutes Licht
Stresemannallee 19
60596 Frankfurt am Main
Germany
phone: +49(0)696302-353
fax +49(0)696302-400
www.licht.de