LIGHTING APPLICATIONS - Lighting SuspensionWeight Load Guidelines Page 34. COVER ART. Solimar®...
Transcript of LIGHTING APPLICATIONS - Lighting SuspensionWeight Load Guidelines Page 34. COVER ART. Solimar®...
®
LIGHTING APPLICATIONS
VOLUMEXIX
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
1 GRIPLOCK®SYSTEMS: THE ART OF SUSPENSION®
Powered Suspension Systems
About Griplock Systems Page 3-4
Griplock Architectural Kits - Power Feed Page 5
Griplock Architectural Kits - Non-Power Feed Page 6
Griplock Industrial Kits Page 7-8
Type 10 Grippers for 1/32” - 1mm Cable Page 9
Type 12 Grippers for 1/32” - 3/64” Cable Page 9
Type 15 Grippers for 3/64” - 1/16” Cable Page 10-13
Type 18 Grippers for 1/16” - 5/64” Cable Page 14
Type 25 Grippers for 1/16” - 2.5mm Cable Page 15-16
Type 30 Grippers for 3/32” - 1/8” Cable Page 17
Track Lighting Systems Page 18
Sputnik Grippers Page 19
Strut Grippers Page 20
Ring Grippers Page 20
Hook Grippers Page 21
Fork Grippers Page 22
Power Feed Grippers Page 23
Cable Stays Page 23
Seismic Bracing System Page 24
Cable Couplers - Adjustable & Fixed Page 25-26
Griplock Cables & Terminals Page 27-28
Tethers Page 29
Power Cords Page 30
Ceiling Canopies & Accessories Page 31
Ceiling Attachments & Hardware Page 32
Installation Guidelines Page 33
Weight Load Guidelines Page 34
COVER ARTSolimar® Powered Suspension System
from Griplock Systems.
Front cover art & layout by Steven DallyInside pages art by Ryan Kwast & Steven Dally
Layout by Beau Pillet
Page 2
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
POWERED SUSPENSION SYSTEMS 2
Rincon®Powered Suspension System
Solimar®Powered Suspension System
Single Conductor Powered Suspension System
Ideal for linear fixtures, light boxes, or multi-pendant LED fixtures requiring multiple suspensions.
CordFree™ Technology• For use with Class 2 LED Fixtures
• 100 watts / 60 volts DC in U.S.• 100 watts / 30 volts DC in Canada
Elegant Design• No bulky power cords needed• Fixtures have a clean, modern lookStrong Suspension for Heavy Fixtures• 1/16” cable - 40 lbs SWL per suspension*• 3/32” cable - 100 lbs SWL per suspension*Easy Field Installation• Labor-saving tool-free installation• Quickly adjust & re-adjust to any height
Dual Conductor Coaxial Cable and SpecializedConnection Hardware for Ceiling and Fixture
Ideal for single pendant fixtures, or linearfixtures to provide power and/or control.
CordFree™ Technology• For use with Class 2 LED Fixtures
• 100 watts / 60 volts DC in U.S.• 100 watts / 30 volts DC in Canada
Elegant Design• No bulky power cords needed• Fixtures have a clean, modern lookStrong Suspension for Heavy Fixtures• 40 lbs SWL per suspension*• Stronger than any other coaxial cableEasy Field Installation• Easily adjust to desired height
Bento LED Pendant © Hubbardton Forge
impact! fly.r™ LED
Patent Pending
U.S. Patent Nos. 8,807,780; 8,403,519;Taiwan Patent No. I474344; China Patent No. 102741942;European Patent No. 2504845; other patents pending
Available 2017
Rincon® & Solimar® are engineered systems that must be designed and integrated into lighting fixtures by the Lighting OEM.
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
3 ABOUT GRIPLOCK®SYSTEMS
Cable
Plunger
Ball bearings
Spring
Pressure plate
Gripper housing
Cable
Ball bearing
GRIPLOCK® SYSTEMS
Griplock designs, engineers, manufactures and distributes adjustable and fixed cable suspension systems for use in the lighting, retail display, art display, suspended ceiling, trade show, rigging and defense industries. Since 1992 Griplock has provided manufacturers and contractors with the broadest selection of the highest quality, most reliable cable suspension products in the world.
Griplock’s products include grippers, cable couplers, aircraft cable, ceiling canopies, power cords, accessories and an exclusive line of powered suspension systems.
GRIPLOCK® GRIPPERS
The cable gripper is a fully adjustable cable suspension device for use with 7x7 and 7x19 aircraft cable only. It automatically locks anywhere on the cable and can be moved up or down at the touch of a button. As shown in the drawings,the three ball bearings sit in three of the six grooves on the circumference of the cable so the pressure on the cable is evenly distributed. As a result, the gripper holds about 60% of the published break strength of the cable. Griplock recommends a 5:1 safe working load (SWL) based upon that 60%. This makes the gripper the fastest, strongest and simplest way to suspend lighting and other fixtures. During the last 20 or so years, the aircraft cable / gripper combination has become the preferred pendant lighting suspension system by manufacturers and installers worldwide.
The Griplock Gripper is precision built to our own specifications. We closely monitor quality, and batch-test every shipment received. We continually refine the gripping mechanism to produce better results.
GRIPLOCK® PREMIUM and ZF STANDARD GRIPPERS
Arguably the finest grippers available, Premium grippers combine an immense range ofapplications with a beautiful finish and extraordinary holding power.Lower cost ZF Standard grippers are competitively priced for use in industrial and architecturallighting applications. ZF Standard grippers are built to our specifications and receivefull quality assurance testing at our facility. Part numbers are in green, eg. ZF-15ZZ. Griplock® Systems recommends a lower safe working load (SWL) for ZF Standardgrippers than its Premium products. See page 34.
WHERE IT STOPS, IT LOCKS®
Griplock Grippers. Sophisticated in design, simple to use:
• Insert the cable through the plunger into the gripper mechanism. Slide the gripper to the desired position.
• To re-adjust, depress the plunger with your fingertip and move the gripper to a new position. Release the plunger to lock.
• The 3- or 6-ball gripping mechanism is spring-loaded and allows the gripper to move freely UP the cable. The gripper cannot move DOWN the cable unless the plunger is depressed.
• An optional safety nut or safety cap can be added to completely lock the mechanism in both directions. See examples on page 10.
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
GRIPLOCK® CABLE Griplock cable assemblies are available in 7x7 or 7x19 galvanized or stainless, medium-to-high tensile strength aircraft cable. These assemblies are factory fitted with a variety of die-cast zinc, swaged aluminum, swaged copper or swaged steel terminals. Unless specified, Griplock terminals are guaranteed to the full published break-strength of the cable, however, when used in conjunction with grippers, cables will have a break strength that is less than the break strength of the cable alone. Please refer to the Installation and Weight Load Guidelines on pages 33 and 34. In all cases Griplock recommends a STATIC safe working load (SWL) of no more than 1/5 of the minimum break strength of the gripper / cable combination.
GRIPLOCK® ARCHITECTURAL (GA) SUSPENSION KITS Griplock provides a full line of cable suspension kits for the architectural lighting market. See pages 5 and 6. GA kits are not supplied with grippers. Please see the following pagesfor the appropriate gripper for your application.
GRIPLOCK® INDUSTRIAL (GI) SUSPENSION KITS
GI kits are supplied with Griplock’s ZF Standard grippers. These competitively priced industrial kits are shown on pages 7 and 8. Call, email or go online for our Griplock Industrials catalog.
CUSTOM DESIGNS, ENGINEERING & SERVICE
Any combination of Griplock products can be assembled, packaged and labeled according to your specifications. You may supply your own parts and instruction material for inclusion in your kits. Pricing is usually lower than the cost of individual components purchased “a la carte”. SolidWorks drawings of customer kits are available at no charge. Griplock engineering and sales staff are ready to help you in your selection of cables, couplers and grippers. If you still can’t find the part you need, we can design and build it for you.
QUALITY & SAFETY
Suspending pendant fixtures safely is Griplock’s highest priority. Improper installation and/or the wrong choice of components can have devastating consequences. Griplock’s reputation is built on safety, quality, customer service and over 20 years of experience. Our customers know that we stand squarely behind our products.
Griplock’s quality control system is modeled after ISO 9001. Prior to assembly, all individual Griplock Gripper components are tested randomly to meet Griplock’s high QC standards.
ABOUT GRIPLOCK®SYSTEMS 4
GA
GI
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
SCALE:
FILE:
DATE:
410 Palm Ave. Loft A18, Carpinteria, CA 93013Phone (805) 566-0064 Fax (805) 566-0065
www.griplocksystems.com
GRIPLOCK SYSTEMSG-AG16-SL-PF183-xxx
1:1This drawing and these specifications are the exclusive property ofGRIPLOCK SYSTEMS LLC and shallnot be divulged, reproduced,copied, or used as the basis for the manufacture or sale of apparatuswithout the express written authorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
POWER FEED KITS P/N examples3/64” galvanized cable GA-AG12-PF182-xxx1/16” galvanized cable GA-AG16-PF184-xxx5/64” galvanized cable GA-AG20-PF185-xxx3/32” galvanized cable GA-AG24-PF183CB-xxx 1/16” stainless steel cable GA-AS16-PF183-xxxCord & canopy in black GA-AG16-PF183B-xxx
POWER FEED KITS FOR VAULTED CEILINGS P/N examples 3/64” galvanized cable GA-AG12-SL-PF183-xxx 1/16” galvanized cable GA-AG16-SL-PF123-xxx 5/64” galvanized cable GA-AG20-SL-PF143-xxx3/32” galvanized cable GA-AG24-SL-PF144-xxx 1/16” stainless steel cable GA-AS16-SL-PF183-xxx Cord & canopy in black GA-AG16-SL-PF183B-xxx
1 x cable tie per ft.
2 x bushings to match cord & PF holes
Power cord to match cable length + 6”
1/4-20 sloped ceiling coupler
5” canopy 0.25” center hole
Power cord to match cable length + 6”
1/4-20 slipring coupler
1 x cable tie per ft.
2 x bushings to match cord & PF holes
Bracket bar with1/4-20 x 1” stud
5” canopy 0.41” center hole
3/16”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
Bracket bar with1/4-20 x 1” stud
3/64”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
5 GRIPLOCK® ARCHITECTURAL KITS - POWER FEED GA
Typical power cords: 18/2 SVT white (PF182) 18/2 SVT black (PF182B) 18/3 SVT white (PF183) 18/3 SVT black (PF183B) The lettering in red shows how a power cord could appear in the part number of the GA kit you want to order. There’s a list of available power cords on page 30, but there isn’t room on this page to list each one. However, Griplock’s customer service can create a GA kit containing any available cord in the standard lengths shown at the top of this page.
18/3 SJT clear braided (PF183CB) 18/4 AWM white (PF184)18/4 AWM black (PF184B) 18/4 SJT clear braided (PF184CB)
Grippers are NOT supplied with these kits. Please see following pages for the appropriate gripper for your application. Cables are available in galvanized (AG) or stainless steel (AS).
xxx = Cable length in inches Stock lengths: 24”, 48”, 96”, 120”, 150”, 180” & 240”
16/3 SJT white (PF163)14/3 SJT white (PF143) 14/3 SJT black (PF143B)14/4 SJT white (PF144)
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
NON-FEED KITS P/N examples3/64” galvanized cable GA-AG12-Q5-xxx1/16” galvanized cable GA-AG16-Q5-xxx 5/64” galvanized cable GA-AG20-Q5-xxx 3/32” galvanized cable GA-AG24-Q5-xxx 1/16” stainless steel cable GA-AS16-Q5-xxx Canopy in black GA-AG16-Q5B-xxx
NON-FEED KITS FOR VAULTED CEILINGS P/N examples3/64” galvanized cable GA-AG12-SL-Q5-xxx1/16” galvanized cable GA-AG16-SL-Q5-xxx 5/64” galvanized cable GA-AG20-SL-Q5-xxx 3/32” galvanized cable GA-AG24-SL-Q5-xxx 1/16” stainless steel cable GA-AS16-SL-Q5-xxx Canopy in black GA-AG16-SL-Q5B-xxx
P/N examples3/64” galvanized cable GA-AG12-Q2-xxx1/16” galvanized cable GA-AG16-Q2-xxx 5/64” galvanized cable GA-AG20-Q2-xxx 3/32” galvanized cable GA-AG24-Q2-xxx 1/16” stainless steel cable GA-AS16-Q2-xxx Canopy in black GA-AG16-Q2B-xxx
2” canopy 0.25” center hole
1/4-20 coupler
Bracket bar with1/4-20 x 1” stud
5” canopy 0.25” center hole
1/4-20 sloped ceiling coupler
1/4-20 sloped ceiling coupler
5” canopy 0.25” center hole
P/N examples3/64” galvanized cable GA-AG12-SL-Q2-xxx1/16” galvanized cable GA-AG16-SL-Q2-xxx 5/64” galvanized cable GA-AG20-SL-Q2-xxx 3/32” galvanized cable GA-AG24-SL-Q2-xxx 1/16” stainless steel cable GA-AS16-SL-Q2-xxx Canopy in black GA-AG16-SL-Q2B-xxx
2” canopy 0.25” center hole
Bracket bar with1/4-20 x 1” stud
3/16”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
3/16”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
3/16”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
3/16”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
1/4-20 coupler
GRIPLOCK® ARCHITECTURAL KITS - NON-POWER FEED 6GAGrippers are NOT supplied with these kits. Please see following pages for the appropriate gripper for your application.
Cables are available in galvanized (AG) or stainless steel (AS). xxx = Cable length in inches Stock lengths: 24”, 48”, 96”, 120”, 150”, 180” & 240”
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
7 GRIPLOCK® INDUSTRIAL KITS Gi
ZZPushmepullyu gripper
CEILING ATTACHMENTS
FIXTURE ATTACHMENTS
15ZGripper w/ 1/4-20 int. thread
FIXTURE ATTACHMENTS
TGToggles
GHKSnap-hooks
CC1/4-20 cable coupler
44Loop
TGToggles w/ X-cable gripper
TGToggle
GHKSnap-hook
Y-CABLES
ZZ Adjustableloop-maker
aka Pushmepullyu
TGToggles fit 1/4” - 5/16”
dia. openings
15ZThreads to
1/4-20 ceiling studs, etc.
GHK Snap-hookfor 1/4” eye
GI-16Yxx-ZZ-TG-xxx2 assys. per kit.
GI-16XCxx-44-TG-xxx2 assys. per kit.
ZZ
xx
xxx
44
xx/2
xxx
X-CABLESX-cable (XC)
gripper has a thumb screw to lock off the X-cable
X-cable overall length xx = 2 x actual leg length
Y-CABLE KITS
GI-16Yxx-ZZ-TG-xxxGI-16Yxx-15Z-TG-xxxGI-16Yxx-ZZ-GHK-xxxGI-16Yxx-15Z-GHK-xxx
xx = leg length: 12” & 24”xxx = overall length: 60”, 120”, 180” & 240”
X-CABLE KITS
GI-16XCxx-44-TG-xxxGI-16XCxx-CC-TG-xxxGI-16XCxx-TG-TG-xxxGI-16XCxx-GHK-TG-xxx
xxx = overall length: 60”, 120”, 180” & 240”xx = total X-cable length: 12”, 24”, 36” & 48”Actual leg length = 1/2 of X-cable length
CEILING ATTACHMENTSX-CABLES
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
GRIPLOCK® INDUSTRIAL KITS 8Gi
CEILING ATTACHMENTS
FIXTURE ATTACHMENTS
CC1/4-20 cable coupler
44Loop
GHKSnap-hook
TGToggle
15ZGripper w/ 1/4-20 int. thread
CEILING AND FIXTURE ATTACHMENTSSINGLE CABLES
V-CLIP CABLES
CC1/4-20 cable coupler
44Loop
GHKSnap-hook
TGToggle
HX-VCLIP-SMSide mount v-clip
HX-VCLIP-TMTop mount v-clip
GI-AG16-15Z-TG-xxx2 assys. per kit.
GI-AG16-V-44-xxx2 assys. per kit.
xxx
44
DIM A
ZF-15Z-1420iCeiling Gripperw/ 1/4-20 Internal Thread
1/16" Galvanized7x7 Cable
Toggle Plate for0.25" Opening
Cable Terminal
Can be usedinversely
GI-AG16-15Z-TG-xxxSingle Cable w/ Ceiling Gripper & Toggle
2 ASSYS. PER KIT
BULK PACKAGING AVAILABLE
DIM AGRIPLOCK P/N60"GI-AG16-15Z-TG-60
120"GI-AG16-15Z-TG-120180"GI-AG16-15Z-TG-180240"GI-AG16-15Z-TG-240
SCALE:
FILE:
DATE:
1132 Mark Avenue, Carpinteria, CA 93013Phone (805) 566-0064 Fax (805) 566-0065
www.griplocksystems.com
GRIPLOCK SYSTEMSGI-AG16-15Z-TG-xxx
1:2This drawing and these specifications are the exclusive property ofGRIPLOCK SYSTEMS LLC and shallnot be divulged, reproduced,copied, or used as the basis for the manufacture or sale of apparatuswithout the express written authorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
xxx
15Z
TG
SINGLE CABLE KITSSingle cable systems can be used inversely:
GI-AG16-15Z-44-xxxGI-AG16-15Z-CC-xxxGI-AG16-15Z-TG-xxxGI-AG16-15Z-GHK-xxx
GI-AG16-ZZ-44-xxxGI-AG16-ZZ-CC-xxxGI-AG16-ZZ-TG-xxxGI-AG16-ZZ-GHK-xxxxxx = overall length: 60”, 120”, 180” & 240”
SINGLE CABLE KITS
GI-AG16-V-44-xxxGI-AG16-V-CC-xxxGI-AG16-V-TG-xxxGI-AG16-V-GHK-xxx
xxx = overall length: 60”, 120”, 180” & 240”
V-CLIPSNot supplied with kits but available from Griplock.
DIM A
ZF-15Z-1420iCeiling Gripperw/ 1/4-20 Internal Thread
1/16" Galvanized7x7 Cable
Toggle Plate for0.25" Opening
Cable Terminal
Can be usedinversely
GI-AG16-15Z-TG-xxxSingle Cable w/ Ceiling Gripper & Toggle
2 ASSYS. PER KIT
BULK PACKAGING AVAILABLE
DIM A GRIPLOCK P/N60" GI-AG16-15Z-TG-60
120" GI-AG16-15Z-TG-120180" GI-AG16-15Z-TG-180240" GI-AG16-15Z-TG-240
SCALE:
FILE:
DATE:
1132 Mark Avenue, Carpinteria, CA 93013Phone (805) 566-0064 Fax (805) 566-0065
www.griplocksystems.com
GRIPLOCK SYSTEMSGI-AG16-15Z-TG-xxx
1:2This drawing and these specifications are the exclusive property ofGRIPLOCK SYSTEMS LLC and shallnot be divulged, reproduced,copied, or used as the basis for the manufacture or sale of apparatuswithout the express written authorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
ZZPushmepullyu gripper
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
9 TYPE 10 GRIPPERS FOR 1/32” & 1MM CABLE
10Z-832iSide exit gripper.8-32 int. thread
12-M8-KFTTop flange gripper.
M8 x 1 thread.12-M8-KFT-Sw/ safety nut
10Z-M4-SL1.1Slotted cross-cable gripper.
M4 set screw included
10-M6-ATAll-thread gripper.
M6 x 1 thread
10-M6-KFTTop flange gripper.
M6 x 1 thread
12-M8-ATAll-thread gripper.M8 x 1.25 thread.
12-M8-AT-Sw/ safety nut
12Z-M4iSide exit gripper.
M4 x 0.7 int. thread
12-K12Spherical gripper.12mm diameter
TYPE 12 GRIPPERS FOR 1/32” - 3/64” CABLE
Locknuts and other fastening hardware available See page 34 for Safe Working Loads
1/32” / 1mm aircraft cable
10-M6-KFT Gripper
Fluxwerx LED Lighting Fixture
Griplock’s smaller Type 10 and Type 12 grippers, used in conjunction with 1/32”, 1mm, and 3/64” aircraft cable, areperfect for the new lightweight LED fixtures now coming to market.
Lightweight Cable Suspension System
Our thinnest cable system yet!
10ZG-832e-315Jointed side exit gripper.
8-32 x 0.315” thread
10ZG-832iJointed side exit gripper.
8-32 int. thread
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
12Z-M4OR-SL1.6Slotted cross-cable gripper.M4 thumb screw included
12-M8-KFB-RRReverse release gripper.
M8 x 1 thread.Cable releases at base
TYPE 12 GRIPPERS FOR 1/32” - 3/64” CABLE 10
15-18IP-KFTTop flange gripper.
1/8 IPS thread.15-18IP-KFT-S-T2
w/ safety nut
15-18IP-AT All-thread gripper.
1/8 IPS thread
15-1420-T2Standard gripper.
1/4-20 steel thread.15-1420-SC-T2w/ safety cap
15-1032-T2Standard gripper.10-32 steel thread
15-18IP-AT-1 All-thread gripper.1/8 IPS x 1” thread
15-18IP-LITO-SC Flat flange gripper.
1/8 IPS thread.w/ safety cap
ZF-12-M8-KFTTop flange gripper.
M8 x 1 thread
ZF-12-NT-RRReverse release gripper.
No thread.Cable releases at base
Lower cost ZF Standard grippers in this catalog are competitively priced for use inindustrial and architectural lighting applications.Griplock® Systems recommends a lower safe working load (SWL) for ZF Standardgrippers than its Premium gripping products. See page 34.
See page 34 for Safe Working Loads
TYPE 15 GRIPPERS FOR 3/64” - 1/16” CABLE
Locknuts and other fastening hardware available
15-14IP-AT-T2 All-thread gripper.
1/4 IPS thread
15-14IP-KFT-T2Top flange gripper.
1/4 IPS thread.15-14IP-KFT-S-T2
w/ safety nut
ZF-12X2Looping gripper.Reverse release1/32” / 1mm
aircraft cable
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
11 TYPE 15 GRIPPERS FOR 3/64” - 1/16” CABLE
15Z-832i-T28-32 int. thread.
See page 19
15Z-832i-SC-T2Side exit gripper.
8-32 int. thread w/ safety cap
15Z-1420e-276-T2Side exit gripper.
1/4-20 x 0.276” thread
15Z-1420e-394-T2Side exit gripper.
1/4-20 x 0.394” thread
15Z-1032E-R-42Side exit gripper.
10-32 x 0.33” thread
15Z-1420i-T2Side exit gripper.1/4-20 int. thread
15Z-M6R-Q2.3Through-hole cross-cable gripper.
M6 thumb screw included.15Z-M6R-Q2.3-SC
w/ safety cap
15Z-M6R-SL2.3 Slotted cross-cable gripper.M6 thumb screw included
Locknuts and other fastening hardware available See page 34 for Safe Working Loads
15Z-1420i-KF-SSide exit gripper w/ key flats.
1/4-20 int. thread.w/ safety nut
15-38IP-KFT-STop flange gripper.
3/8 IPS thread.w/ safety nut
15-14IP-KFC-T2Center flange gripper.
1/4 IPS thread
15-14IP-KFBBase flange gripper.
1/4 IPS thread
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
TYPE 15 GRIPPERS FOR 3/64” TO 1/16” CABLE 12
DG-15Z-TC-300-SATSide exit clevis gripper 0.30” slot.
Satin chrome finish.10-32 set screw included
15Z-Q1032Side exit gripper.
10-32 horizontal thread.Fastener NOT included
15Z-QM3-T2Side exit gripper.
w/ 0.10” slot.M3 set screw included
15Z-GA-T2Side exit clevis gripper 0.15” slot.
10-32 set screw included
15ZG-1420e-315Jointed side exit gripper. 1/4-20 x 0.315” thread
15ZG-1420iJointed side exit gripper.
1/4-20 int. thread
Locknuts and other fastening hardware available
15-K18Spherical gripper.18mm diameter
15-M6-RRReverse release gripper.
M6 x 1 thread at top.E-ring included.
Cable releases at base
15-K18-RRReverse release spherical gripper.
Cable releases at base.18mm diameter
15-NT-KFBBase flange gripper.
No thread.E-ring included
See page 34 for Safe Working Loads
15Z-1420e-SCCSlimline gripper.1/4-20 thread.See page 3
15-B20Base flange gripper.
No thread
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
0.36"
1.81"
3/64" & 1/16" Cable
75lbs max. 40lbs max.
GRIPLOCK SYSTEMSPROPRIETARY AND CONFIDENTIAL
410 Palm Ave. Loft A18, Carpinteria, CA93013Phone (805) 566-0064 Fax (805) 566-0065
Dual Gripper for 3/64"ZF-15ZZ
& 1/16" 7x7 or 7x19 Cable06/29/05
GRIPLOCK SYSTEMSThis drawing and these specifications are the exclusive property of GRIPLOCK SYSTEMS LLC.and shall not be divulged, reproduced, copied,or used as the basis for the manufacture or saleof apparatus without the express writtenauthorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
410 Palm Ave. Loft A18, Carpinteria, CA93013Phone (805) 566-0064 Fax (805) 566-0065
SCALE:
MATERIAL:
PART NUMBER:
REF:
FILE:
NICKEL PLATED BRASS1:1 ZF-15ZZ rB c
DESCRIPTION:DATE:
13 TYPE 15 GRIPPERS FOR 3/64” - 1/16” CABLE
Locknuts and other fastening hardware available
ZF-15Z-VCV-clip gripper.See page 8
ZF-15-1420-SCStandard gripper.
1/4-20 steel thread.w/ safety cap.ZF-15-1420
w/ out safety cap
ZF-15-1032Standard gripper.10-32 steel thread
ZF-15-18IP-KFT-STop flange gripper.
w/ safety nut
ZF-15Z-1420iSide exit gripper.1/4-20 int. thread.See pages 7 & 8
ZF-15ZZPushmepullyu gripper.
See pages 7 & 8
75 lbs max. 50 lbs max.
When Pushmepullyu is used to join 1/16” cables IN SERIES, safe working load is reduced to 50 lbs.
See weight charts on page 34
ZF-15Z-XCCross-cable gripper.
M6 thumb screw included. See pages 7 & 8
ZF-15Z-M6-Q5.5-T2Balance bar gripper.
M6 set screw included
ZF-15ZG-832iJointed side exit gripper.
8-32 int.thread
Lower cost ZF Standard grippers in this catalog are competitively priced for use in industrial and architectural lighting applications. Griplock® Systems recommends a lower safe working load (SWL) for ZF Standard grippers than its Premium gripping products. See page 34.
See page 34 for Safe Working Loads
ZF-15Z-JU-1420iUniversal jointed side exit
gripper.1/4-20 int. thread
ZF-15Z-JU-1420e-315Universal jointed side exit
gripper.1/4-20 x 0.315” thread
ZF-15-14IP-KFTTop flange gripper.
1/4 IPS thread
ZF-15-38IP-KFT-R-STop flange gripper.
3/8 IPS thread.w/ safety nut
ZF-15-18IP-KFT-RRTop flange gripper. Reverse release.
1/8 IPS thread
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
TYPE 18 GRIPPERS FOR 1/16” - 5/64” CABLE 14
18Z-1420iSide exit gripper.1/4-20 int. thread
18ZG-1420e-315Jointed side exit gripper.1/4-20 x 0.315” thread
18Z-1420e-440Side exit gripper.
1/4-20 x 0.44” thread
18Z-M10eSide exit gripper.M10 x 1 thread
18ZG-1420iJointed side exit gripper.
1/4-20 int. thread
ZF-18Z-XCCross cable gripper.
w/ knurled thumb screw
ZF-18Z-1420eS-394Side exit gripper.
1/4-20 x 0.394” thread.ZF-18Z-1420eS-440
Side exit gripper.1/4-20 x 0.44” thread
ZF-18Z-1420iSide exit gripper.
1/4-20 thread
Locknuts and other fastening hardware available
Lower cost ZF Standard grippers in this catalog are competitively priced for use in industrial and architectural lighting applications. Griplock® Systems recommends a lower safe working load (SWL) for ZF Standard grippers than its Premium gripping products. See page 34.
See page 34 for Safe Working Loads
ZF-18Z-JU-1420iUniversal jointed side exit
gripper.1/4-20 int. thread
ZF-18Z-JU-1420e-315Universal jointed side exit
gripper.1/4-20 x 0.315” thread
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
15 TYPE 25 GRIPPERS FOR 1/16” - 2.5MM CABLE
25Z-1420i-T2Side exit gripper.1/4-20 int. thread
25Z-M10eSide exit gripper.
M10 thread
25Z-1420i-SSide exit gripper.1/4-20 int. thread.
w/ safety nut
25-14IP-KFT-STop flange gripper.
1/4 IPS thread.w/ safety nut
25-14IP-ATAll thread gripper.
1/4 IPS thread
25-14IP-KFC-SCenter flange gripper.
1/4 IPS thread.w/ safety nut
25-38IP-ATAll thread gripper.
3/8 IPS thread.25-38IP-AT-Sw/ safety nut
25-38IP-KFTTop flange gripper.
3/8 IPS thread.25-38IP-KFT-Sw/ safety nut
25-38IP-KFC-SCenter flange gripper.
3/8 IPS thread.w/ safety nut
25GSwivel gripper.
w/ mounting plate
25Z-M6-SL3.0-SSlotted cross-cable gripper.
M6 set screw included.w/ safety nut
25-B5Side-mount gripper.
#8 wood screw included
Locknuts and other fastening hardware available See page 34 for Safe Working Loads
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
TYPE 25 GRIPPERS FOR 1/16” - 2.5MM CABLE 16
DG-25-BUL-KFB-SATBase flange gripper.
Detachable base plate. Satin chrome finish.
w/ safety cap
25Z-1420R-Q3.0-SCThrough hole cross-cable gripper.
1/4-20 thumb screw included. w/ safety cap
ZF-25-14IP-KFB-SCBottom flange gripper.
1/4 IPS thread.w/ safety cap.
5/64” - 2.5mm only
ZF-25-14IP-KFT-STop flange gripper.
1/4 IPS thread.w/ safety nut.
5/64” - 2.5mm only
ZF-25-12IP-KFT-R-SKnurled top flange gripper.
1/2 IPS thread.w/ safety nut.
5/64” - 2.5mm only
ZF-25-38IP-KFT-R-SKnurled top flange gripper.
3/8 IPS thread.w/ safety nut.
5/64” - 2.5mm only
ZF-25-38IP-KFT-STop flange gripper.
3/8 IPS thread.w/ safety nut.
5/64” - 2.5mm only
Locknuts and other fastening hardware available
Lower cost ZF Standard grippers in this catalog are competitively priced for use in industrial and architectural lighting applications.Griplock® Systems recommends a lower safe working load (SWL) for ZF Standard grippers than its Premium gripping products. See page 34.
See page 34 for Safe Working Loads
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
17 TYPE 30 GRIPPERS FOR 3/32” - 1/8” CABLE
30-M16-ATAll-thread gripper.M16 x 1.0 thread.3-ball mechanism
30Z-JU-3816i-V6-SUniversal Jointed side exit gripper.
3/8-16 int. thread.6-ball mechanism. Safety nut.
30-3816e-V6-SStandard gripper.
3/8-16 thread.6-ball mechanism w/ safety nut.
30-3816e-V6B-SBlack zinc plated
30Z-1420i-V6-SSide exit gripper.1/4-20 int. thread.
6-ball mechanism. Safety nut.30Z-1420i-V6B-SBlack zinc plated
30Z-M6-V6-Q3.5-SThrough-hole cross-cable gripper.
6-ball mechanism.M6 set screw included.
w/ safety nut
30-K23Spherical gripper.3-ball mechanism.
23mm diameter
ZF-30X2Looping gripper.Reverse release
Locknuts and other fastening hardware available
Lower cost ZF Standard grippers in this catalog are competitively priced for use in industrial and architectural lighting applications.Griplock® Systems recommends a lower safe working load (SWL) for ZF Standard grippers than its Premium gripping products. See page 34.
See page 34 for Safe Working Loads
30Z-3816i-V6-SCSide cable exit gripper,
6-ball mechanism.3/8-16 internal thread.
Safety nut
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
TRACK LIGHTING SYSTEMS 18
Griplock offers the Stabilizing Rod (SR) for track lighting, an 8” nickel-plated stem that screws down onto the threaded plunger of our track-suspension gripper. This locks down the cable-gripping mechanism and helps leverage anoff-balance track back to its correct position.
KITS & GRIPPERS FOR CABLE-SUSPENDED TRACK LIGHTING.
Any combination of the parts shown below can be offered as a kit. Kits shown below are examples only.
xxx = cable lengths: 60”, 120”, 180” & 240”
15Z-832-SR-8Gripper with 8” stabilizing
rod & 8-32 int. thread.8-32 bolt included
Typical lighting track
Cable coupler (CC)
15Z-832i-T2Gripper only.8-32 bolt available
8” x M4 threadedstabilizing rod (SR)
Gripper w/ M4 threaded plunger
8-32 bolt
GI-16TRK-SR-GHK-xxxSnap-hook, 1/16” galv. cable, 8” rod, gripper & 8-32 bolt. 2 assys. per kit
GI-16TRK-CC-xxxCable coupler, 1/16” galv. cable, gripper & 8-32 bolt. 2 assys. per kit.
GI-16TRK-44-xxxLooped 1/16” galv. cable,gripper & 8-32 bolt. 2 assys. per kit
Looped cable (44)
Snap-hook (GHK)
8-32 bolt
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
19 SPUTNIKS
SPUTNIKS
Sputniks are available in three sizes and come in 3 and 4 cable versions. They accept a range of primary and secondary cable sizes. See chart below.
15-SPT3Sputnik gripper.
See chart above.Cables NOT included
15-SPT4Sputnik gripper.
See chart above. Cables NOT included
25-SPT3Sputnik gripper.
See chart above.Cables NOT included
25-SPT4Sputnik gripper.
See chart above.Cables NOT included
Primary cable
Secondary cables
15ZG-1420iJointed gripper.
For 3/64” - 1/16” cable.(four places)
P/N PRIMARY CABLE SECONDARY CABLES 15-SPT3 3/64” - 1/16” 3/64” - 1/16” (3) 15-SPT4 3/64” - 1/16” 3/64” - 1/16” (4)
25-SPT3 1/16” - 3/32” 3/64” - 1/16” (3) 25-SPT4 1/16” - 3/32” 3/64” - 1/16” (4) 30-SPT3 5/64” - 1/8” 1/16” - 5/64” (3) 30-SPT4 5/64” - 1/8” 1/16” - 5/64” (4)
30-SPT330-SPT4
Sputnik gripper.See chart below.
Cables NOT included
See page 34 for Safe Working Loads
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
STRUT GRIPPER 20
ZF-30-STRUT-RR Reverse release allows height
adjustment from above and below.
STRUT GRIPPER FOR 3/32” - 1/8” CABLE
Cable is inserted though the top and is released from above or below.
Strut
Lock nut
Pull down to release
ZF-15-RIRing gripper.
For 3/64” - 1/16” cable
18-RIRing gripper.
For 3/64” - 1/16” cable.18-RI-S
w/ safety nut
15-RIRing gripper.
For 3/64” - 1/16” cable.15-RI-S
w/ safety nut
30-RI-V6B-SRing gripper.
For 3/32” - 1/8” cable.6-ball mechanism.
Black zinc plated w/ safety nut.30-RI-V6-S
Nickel plated
RINGS
Locknuts and other fastening hardware available See page 34 for Safe Working Loads
Lower cost ZF Standard grippers in this catalog are competitively priced for use in industrial and architectural lighting applications.Griplock® Systems recommends a lower safe working load (SWL) for ZF Standard grippers than its Premium gripping products. See page 34.
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
21 HOOKS
ZF-15Z-1420-GHASnap-hook gripper.
For 3/64” - 1/16” cable
18-HASnap-hook gripper.
For 3/64” - 5/64” cable.18-HA-S
w/ safety nut
18Z-1420-GHASnap-hook gripper.
For 3/64” - 5/64” cable
15Z-1420-GHASnap-hook gripper.
For 3/64” - 1/16” cable
15-HASnap-hook gripper.
For 3/64” - 1/16” cable. 15-HA-S
w/ safety nut
RT-15-HASnap-hook gripper.
For 3/64” - 1/16” cable.Safe Working Load:
30 LBS
25Z-1420-GHASnap-hook gripper.
For 1/16” - 3/32” cable.25Z-1420-GHA-S
w/ safety nut.See page 24
30Z-1420-V6-GHASnap-hook gripper.
For 3/32” - 1/8” cable.6-ball mechanism.
w/ safety nut.
10-HAMicro hook gripper.
For 1/32” - 1mm cable
15-GHA-BSnap-hook gripper.
For 3/64” - 1/16” cable.Black chrome plated.
15-GHASnap-hook gripper.
Nickel plated
Locknuts and other fastening hardware available
Lower cost ZF Standard grippers in this catalog are competitively priced for use in industrial and architectural lighting applications. Griplock® Systemsrecommends a lower safe working load (SWL) for ZF Standard grippers than its Premium gripping products. See page 34.
See page 34 for Safe Working Loads
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
FORKS 22
FORK GRIPPERS
The fork dimensions are called out in the part number, eg. 15-FORK-8X16. See below:
25-FORK-6x12-SCFork gripper.
For 1/16” - 3/32” cable.w/ safety cap
30-FORK-10x20-V6-SFork gripper.
For 3/32” - 1/8” cable.6-ball mechanism.
w/ safety nut.30-FORK-10x20-V6B-S
Black zinc plated
10-FORK-4.3x8Fork gripper.
For 1/32” - 1mm cable
12-FORK-5x10Fork gripper.
For 1/32” - 3/64” cable
15-FORK-6x12Fork gripper.
For 3/64” - 1/16” cable
15-FORK-8x16Fork gripper.
For 3/64” - 1/16” cable
15-FORK-6x24Fork gripper.
For 3/64” - 1/16” cable
15-FORK-8x16Example
See page 34 for Safe Working Loads
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
15-38IP-PFAccepts cord up to 0.42” in dia.
3/8 IPS locknut included.For 3/64” - 1/16” cable.
15-38IP-PF-Sw/ safety nut.25-38IP-PF
For 1/16” - 3/32” cable.25-38IP-PF-Sw/ safety nut
15-14IP-PFAccepts cord up to 0.325” in diameter.
1/4 IPS locknut included.For 3/64” - 1/16” cable.
15-14IP-PF-Sw/ safety nut
15-18IP-PFAccepts cord up to 0.25” in diameter.
1/8 IPS locknut included.For 3/64” - 1/16” cable.
15-18IP-PF-Sw/ safety nut
15-M13-PFAccepts cord up to 0.325” in diameter.
2 x M13 locknuts included.For 3/64” - 1/16” cable
ZF-25-12IP-PF-SAccepts cord up to 0.42” in dia.2 x 1/2 IPS locknuts included.
For 5/64” - 2.5mm cable.w/ safety nut
23 POWER FEED GRIPPERS & CABLE STAYS
HF-STAY-xFor 1/32” - 1mm cable.
Power cord ≤ 0.25”
HF-STAY-M4-xM4 set-screw included.
For ≤ 5/64” cable.Power cord ≤ 0.30”
Locknuts and other fastening hardware available
Power feed housing lets the power cord enter the fixture through the
same KO as the gripper.
CABLE STAYS
x = w white b black g gray c clear
Lower cost ZF Standard grippers in this catalog are competitively priced for use in industrial and architec-tural lighting applications. Griplock® Systems recommends a lower safe working load (SWL) for ZF Standard grippers than its Premium gripping products. See page 34.
See page 34 for Safe Working Loads
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
System 2: Longitudinal and lateral 3/32” cables run from wall to wall, intersecting each other and vertical cables asclose to the fixture as possible. Use the CC-UNICROSS at these intersections. Use an adjustable gripper at either end of the 3/32” bulk cable.
Use 25Z-M13-1420-SL gripper and coupler combo for cables that run perpendicular to wall surfaces. Use 25Z-1420-GHA gripper and snap-hook combo for all wall surfaces and all angles.
3/32” lateral cable
CC-UNICROSS Locks any two cables at any angle.3/32” longitudinal cable
Typical linear fixture
Vertical suspension cables
25Z-1420-GHA
25Z-M13-1420-SL combo at each endof 3/32” cable for 90° wall / cable interface
25Z-1420-GHASnap-hooks to eye-bolt at any angle.
Eye-bolt (by others)attaches to structure.
During a seismic event, forces can quickly build up that may cause a lighting fixture to tear loose from its ceiling mountings. The Griplock Seismic Bracing System is designed to limit such movement, not prevent it altogether. The Griplock Seismic Bracing System conforms to California Building Code regulations.
System 1: A single 3/32” cable locks to existing vertical cables via the CC-UNICROSS, running up at a 45° angle to attach to eye-bolts at the ceiling structure via the 25Z-1420-GHA.
GRIPLOCK SYSTEMSThis drawing and these specifications are the exclusive property of GRIPLOCK SYSTEMS INC.and shall not be divulged, reproduced, copied,or used as the basis for the manufacture or saleof apparatus without the express writtenauthorization of GRIPLOCK SYSTEMS INC.
PROPRIETARY AND CONFIDENTIAL
410 Palm Ave. Loft A18, Carpinteria, CA93013Phone (805) 566-0064 Fax (805) 566-0065
SCALE:
MATERIAL:
PART NUMBER:
REF:
FILE:
N/A1:10 Seismic Assy 45 Fixture Rows
Seismic Bracing to CeilingDESCRIPTION:DATE: 06/29/07
CC-UNICROSS Locks any two cables at any angle.
25Z-1420-GHASnap-hooks to eye-bolt at any angle. Eye-bolt by others
GRIPLOCK SYSTEMSThis drawing and these specifications are the exclusive property of GRIPLOCK SYSTEMS INC.and shall not be divulged, reproduced, copied,or used as the basis for the manufacture or saleof apparatus without the express writtenauthorization of GRIPLOCK SYSTEMS INC.
PROPRIETARY AND CONFIDENTIAL
410 Palm Ave. Loft A18, Carpinteria, CA93013Phone (805) 566-0064 Fax (805) 566-0065
SCALE:
MATERIAL:
PART NUMBER:
REF:
FILE:
N/A1:10 Seismic Assy 45 Fixture Rows
Seismic Bracing to CeilingDESCRIPTION:DATE: 06/29/07
SEISMIC / SWAY BRACING SYSTEM 24
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
CC-1420-SL2.1Sloped ceiling coupler.For 1/16” - 5/64” cable.
1/4-20 int. thread.
12-BS-1420Sloped ceiling gripper
For 3/64” cable.1/4-20 int. thread
CC-1420-SL4.4Sloped ceiling coupler.
For ≤ 1/8” cable.1/4-20 int. thread.
w/ ball insert
15-BS-1420Sloped ceiling gripper.For 3/64” - 1/16” cable.
1/4-20 int. thread
CC-SL2.1-SRSloped ceiling
slipring coupler.For ≤ 5/64” cable. 1/4-20 int. thread
CC-1420-T2Cable coupler.
For cable ≤ 3/32”.1/4-20 int. thread
CC-18IPCable coupler.
For cable ≤ 3/32”.1/8 IPS int. thread
CC-2 2-part cable coupler.
For cable ≤ 3/32”
CC-1420Cable coupler.
For cable ≤ 3/32”.1/4-20 int. thread
CC-18IP-SRSlipring coupler.
For cable ≤ 3/32”.1/4-20 int. thread
US Patent 6,761,342 B1
CC-3816Cable coupler.
For cable ≤ 3/32”.3/8-16 int. thread
CC-M8-Q2.4Through hole cross-cable
connector.For ≤ 5/64” cable
CC-M8-SL2.4Slotted cross-cable
connector.For ≤ 5/64” cable
CC-1420-SL3.0-T2For 5/64” - 3/32” cable.
w/ half ball insert
CC-1420-SL4.4
25 CABLE COUPLERS - ADJUSTABLE & FIXED
Locknuts and other fastening hardware available See page 34 for Safe Working Loads
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
15Z-M10-1420-SL2-part gripper.
For 3/64” - 1/16” cable. 1/4-20 int. thread
12Z-M8-SL 2-part gripper.
For 1/32” - 3/64” cable.Use w/ #6 screw
25Z-M13-1420-SL2-part gripper.
For 1/16” - 3/32” cable. 1/4-20 int. thread.
See page 24
15Z-1420-ELP-T22-part gripper.
For 3/64” - 1/16” cable. 1/4-20 int. thread
CC-M82-part cable coupler.
For ≤ 1/16” cable.Use w/ #6 screw
CC-M10-14202-part cable coupler.
For ≤ 5/64” cable. 1/4-20 int. thread
CC-M13-1420-Q2.42-part cable coupler.
For ≤ 5/64” cable. 1/4-20 int. thread.
CC-M13-1420-Q3.5For 3/32” - 1/8” cable
CC-1420-ELP2-part cable coupler.
For ≤ 3/32” cable. 1/4-20 int. thread
CABLE COUPLERS - ADJUSTABLE & FIXED 26
Locknuts and other fastening hardware available See page 34 for Safe Working Loads
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
STOCK CABLE SIZES: 3/64”, 1/16”, 5/64”, and 3/32” unless noted.STOCK CABLE LENGTHS: 24”, 48”, 96”, 120”, 150”, 180”, and 240” unless noted.STOCK CABLE TYPE: 7x7 galvanized and 304 stainless unless noted. 1/8” and up: 7x19.
NON-STOCK CABLE: If cables in non-stock lengths and/or with non-stock terminals are available then we will ship them immediately at no extra charge. If they need to be manufactured there may be a lead time of several weeks, depending on the type and quantity. For cables that need to be cut down to a specific non-stock length there will be a charge for the next available stock length up, in addition to a $1.00 cutting charge. A custom cable set-up charge may also be imposed.
Please consult us for more information on swaged and zinc die cast terminals. Many more are available than can be shown here. Custom designs are also available. Cables are made exclusively of medium-to-high tensile strength aircraft cable.
27 GRIPLOCK® CABLES & TERMINALS
80Ball terminal.
For 1/32” & 3/64” stainless cable.
0.19” diameter.STOCK
87 Barrel terminal.
For 3/64” - 5/64” cable.0.19” diameter.
STOCK
01Swaged barrel terminal.
For 3/32” cable.0.19” diameter.
71Die cast barrel terminal.
STOCK
TGToggle plate.
For 3/64” - 5/64” cable.STOCK
02T-terminal.
For 3/64” - 1/16” cable.0.24” diameter
93 Ball terminal.
For 1/32” - 1/8” cable.Various diameters
73 Barrel terminal.For 3/64” cable.0.12” diameter
91Single shank ball
terminal.For 3/64” - 1/8” cable.
Various diameters
10Barrel terminal.For 1/8” cable.0.34” diameter
AG-12BX3/64” black oxide
AG-16BX1/16” black oxide
AG-24BX3/32” black oxide
Cable assemblies are available in a black oxide finish
but are not stock items.
See page 34 for Safe Working Loads
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
GRIPLOCK®CABLES & TERMINALS 28
1420CC1/4-20 stud.
For ≤ 3/32” cable.STOCK
44Loop
For 1/16” galv. cable.STOCK.
Other cable types & sizes are available
45Loop / thimble.
Available for all cable sizes
99GStake-eye.
All cable sizes.99S
Stainless stake-eye99EC
Stamped copper eye
1032 10-32 swaged stud.
For 1/16” cable
1420 1/4-20 swaged stud.
For 1/16” cable
GHCCSnap-clip.
For ≤ 3/32” cable.STOCK
GHSwaged snap-clip.
For 1/8” cable
GHK Small snap-clip.
60”, 120”, 180” & 240” For 1/16” galvanized cable.
STOCK
GHKZZinc die cast snap-clip.
For 3/64” cable.Safe Working Load: 25 lb
Locknuts and other fastening hardware available See page 34 for Safe Working Loads
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
29 SAFETY TETHERS
TETHERS This page shows examples of some of the many tethers we produce. A small selection of tethers are available in stock. Most tethers are customized per project. Smaller orders can be processed in 1-2 weeks. Larger orders of 1,000 pieces or more may require a 8-10 week lead time. They can be expedited for a small add-on fee, cutting the time for receiving down to 6 weeks. Larger orders requiring a shorter lead time can be expedited with a 1-3 week lead time at a higher cost. Small orders of 100 or less may incur a set up charge and additional fees.
The weight loads for tethers can range from 10 lbs to several hundred. Just give us a call or send us a drawing so we can help you determine your requirements.
WEIGHT LOADS
Swaged stainless or zinc
platedsteel eye
Stamped copper eye
1mmstainless steel
cable
3/64”stainless steel
cable
Die cast term. w/ toggle
1/4-20 threaded stud
Stamped copper eye
Swaged steel eye
Swaged loop w/ heat-shrink Snap-clip
Swagedsteel eye
Swaged loop Stamped copper eye
Swaged loop
Swaged loop w/heat-shrink
Swagedsteel eye
Tethers can be of any material but the cable itself is always 7x7 galvanized or stainless steel, and can also be offered with plastic-coating or black oxide finish. Please refer to pages 27-28 for all available cable terminals. Please call Griplock’s customer service for quotes.
EXAMPLES
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
POWER CORDS 30
POWER CORDS, CANOPIES & BUSHINGSCords are available in bulk, blunt-cut to length, or stripped one or both ends. Call us if you don’t see what you’re looking for.• Unless Gray & Violet specified, 5th and/or 6th conductor colors may vary.• We carry a number of cords with gray and violet control wires. Look for GV in our part number• We carry a number of 600v cords. Look for HV in our part number. Griplock supplies HEYCO
strain relief bushings CORD JACKET CONDS. GRIPLOCK P/N
CORD PF HOLE BUSHING P/NSDIA. DIA. WHITE BLACKTYPE
12/3 SJT BLK. WHT, BLK, GRN. ES-123-SJT-B 12/3 SJT WHT. WHT, BLK, GRN. ES-123-SJT-W 12/3 STO WHT. WHT, BLK, GRN. (600v) ES-123-STO-W-HV 12/4 SJT BLK. WHT, BLK, GRN, RED. ES-124-SJT-B 12/4 SJT WHT. WHT, BLK, GRN, RED. ES-124-SJT-W 12/5 SJT WHT. WHT, BLK, GRN, RED, BL. ES-125-SJT-W 14/3 SJT BLK. WHT, BLK, GRN. ES-143-SJT-B 14/3 SJT WHT. WHT, BLK, GRN. ES-143-SJT-W14/3 ST WHT. WHT, BLK, GRN. (600v) ES-143-ST-W-HV 14/4 SJT BLK. WHT, BLK, GRN, RED. ES-144-SJT-B 14/4 SJT WHT. WHT, BLK, GRN, RED. ES-144-SJT-W 14/4 ST WHT. WHT, BLK, GRN, RED. (600v) ES-144-ST-W-HV16/3 SJT WHT. WHT, BLK, GRN. ES-163-SJT-W 18/2 SVT BLK. WHT, BLK. ES-182-SVT-B 18/2 SVT WHT. WHT, BLK. ES-182-SVT-W 18/2 SVT BLK. GRY, VLT. ES-182-SVT-GV-B 18/2 SVT CLR. BRD. GRY, VLT. ES-182-SVT-GV-CB 18/2 SVT WHT. GRY, VLT. ES-182-SVT-GV-W 18/3 SJT BLK. WHT, BLK, GRN. ES-183-SJT-B 18/3 SJT CLR. BRD. WHT, BLK, GRN. ES-183-SJT-CB 18/3 SJT WHT. WHT, BLK, GRN. ES-183-SJT-W18/3 ST BLK. WHT, BLK, GRN. (600v) ES-183-ST-B-HV 18/3 ST WHT. WHT, BLK, GRN. (600v) ES-183-ST-W-HV 18/3 SVT BLK. WHT, BLK, GRN. ES-183-SVT-B 18/3 SVT WHT. WHT, BLK, GRN. ES-183-SVT-W 18/4 AWM BLK. WHT, BLK, GRN, RED. ES-184-AWM-B 18/4 AWM WHT. WHT, BLK, GRN, RED. ES-184-AWM-W 18/4 SJT BLK. WHT, BLK, GRN, RED. ES-184-SJT-B 18/4 SJT CLR. BRD. WHT, BLK, GRN, RED. ES-184-SJT-CB 18/4 SJT WHT. WHT, BLK, GRN, RED. ES-184-SJT-W 18/5 AWM BLK. WHT, BLK, GRN, GRY, VLT. (600v) ES-185-AWM-GV-B-HV18/5 AWM WHT. WHT, BLK, GRN, GRY, VLT. (600v) ES-185-AWM-GV-W-HV18/5 AWM GRY. WHT, BLK, GRN, GRY, VLT. (600v) ES-185-AWM-GV-G-HV18/5 SJT BLK. WHT, BLK, GRN, RED, OR. ES-185-SJT-B 18/5 SJT BLK. WHT, BLK, GRN, GRY, VLT. ES-185-SJT-GV-B18/5 SJT CLR. BRD. WHT, BLK, GRN, RED, OR. ES-185-SJT-CB 18/5 SJT CLR. BRD. WHT, BLK, GRN, GRY, VLT. ES-185-SJT-GV-CB 18/5 SJT WHT. WHT, BLK, GRN, GRY, VLT. ES-185-SJT-GV-W 18/5 SJT WHT. WHT, BLK, GRN, RED, OR. ES-185-SJT-W 18/6 SJT WHT. WHT, BLK, GRN, RED, GRY, VLT. ES-186-SJT-GV-W 18/6 SJT WHT. WHT, BLK, GRN, RED, OR, BL. ES-186-SJT-W*18/3-22/2 AWM2661 WHT. WHT, BLK, GRN, GRY, VLT. ES-183/222-GV-W *18/3-22/2 AWM2661 BLK. WHT, BLK, GRN, GRY, VLT. ES-183/222-GV-B *18/3-22/2 AWM2661 CLR. BRD. WHT, BLK, GRN, GRY, VLT. ES-183/222-GV-CB * 3 Power Conductors (WHT, BLK, GRN) are 18 Gauge / 2 Control Wires (GRY, VLT) are 22 Gauge
0.45” 0.875” SR-1498-W SR-1497-B0.45” 0.875” SR-1498-W SR-1497-B0.57” 1.125” SR-1288-W SR-1287-B0.50” 0.875” SR-1255-W SR-1254-B0.50” 0.875” SR-1255-W SR-1254-B0.57” 1.125” SR-1288-W SR-1287-B0.38” 0.875” SR-1248W SR-1247-B0.38” 0.875” SR-1248-W SR-1247-B0.38” 0.875” SR-1248-W SR-1247-B0.45” 0.875” SR-1498-W SR-1497-B0.45” 0.875” SR-1498-W SR-1497-B0.53” 0.875” SR-1288-W SR-1287-B0.34” 0.630” SR-1241-W SR-1240-B0.24” 0.500” SR-1151-W SR-1150-B0.24” 0.500” SR-1151-W SR-1150-B0.24” 0.500” SR-1151-W SR-1150-B0.27” 0.625” SR-1201-W SR-1200-B0.24” 0.500” SR-1151-W SR-1150-B0.31” 0.625” SR-1201-W SR-1200-B0.33” 0.625” SR-1201-W SR-1200-B0.31” 0.625” SR-1201-W SR-1200-B0.37” 0.875” SR-1248-W SR-1247-B0.37” 0.875” SR-1248-W SR-1247-B0.26” 0.500” SR-1151-W SR-1150-B0.26” 0.500” SR-1151-W SR-1150-B0.29” 0.625” SR-1201-W SR-1200-B0.29” 0.625” SR-1201-W SR-1200-B0.34” 0.625” SR-1201-W SR-1200-B0.38” 0.875” SR-1248-W SR-1247-B0.34” 0.625” SR-1201-W SR-1200-B0.37” 0.875” SR-1248-W SR-1247-B0.37” 0.875” SR-1248-W SR-1247-B0.37” 0.875” SR-1248-W SR-1247-B0.40” 0.875” SR-1248-W SR-1247-B0.40” 0.875” SR-1248-W SR-1247-B0.40” 0.875” SR-1248-W SR-1247-B0.40” 0.875” SR-1248-W SR-1247-B0.40” 0.875” SR-1248-W SR-1247-B0.40” 0.875” SR-1248-W SR-1247-B0.43” 0.875” SR-1498-W SR-1497-B0.43” 0.875” SR-1498-W SR-1497-B0.26” 0.625” SR-1201-W SR-1200-B0.26” 0.625” SR-1201-W SR-1200-B0.26” 0.625” SR-1201-W SR-1200-B
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
31 CEILING CANOPIES & ACCESSORIES
STOCK CEILING CANOPIES - WHITE IS UV RESISTANT POWDER COAT
CC-632-Q2.9Clamps to cable <3/32” holds 0.25” ctr. hole canopy to tile ceiling
GRIPLOCK P/N COLOR OD CTR. HOLE PF DIA. Q2-14-B BLK. 2” 0.25” Q2-14-W WHT. 2” 0.25” Q2-410-W WHT. 2” 0.41” Q4.5-14-W WHT. 4.5” 0.25” Q4.5-410-W-625 WHT. 4.5” 0.41” Q4.5-410-W-875 WHT. 4.5” 0.41” Q5-W WHT. 5” None Q5-14-B BLK. 5” 0.25” Q5-14-B-875X2 (PFx2) BLK. 5” 0.25” Q5-14-W WHT. 5” 0.25” Q5-14-W-500 WHT. 5” 0.25” Q5-14-W-625 WHT. 5” 0.25” Q5-14-W-625X2 (PFx2) WHT. 5” 0.25” Q5-14-W-875 WHT. 5” 0.25” Q5-14-W-875X2 (PFx2) WHT. 5” 0.25” Q5-410-B-625 BLK. 5” 0.41” Q5-410-B-875 BLK. 5” 0.41” Q5-410-B-875X2 (PFx2) BLK. 5” 0.41” Q5-410-W WHT. 5” 0.41” Q5-410-W-1125 WHT. 5” 0.41” Q5-410-W-500 WHT. 5” 0.41” Q5-410-W-500X2 (PFx2) WHT. 5” 0.41” Q5-410-W-625 WHT. 5” 0.41” Q5-410-W-625X2 (PFx2) WHT. 5” 0.41” Q5-410-W-875 WHT. 5” 0.41” Q5-410-W-875X2 (PFx2) WHT. 5” 0.41” Q5-500-W WHT. 5” 0.50” Q5-625-W-625 WHT. 5” 0.63”
NoneNoneNoneNone0.63”0.88”NoneNone0.88”None0.50”0.63”0.63”0.88”0.88”0.63”0.88”0.88”None1.13”0.50”0.50”0.63”0.63”0.88”0.88”None0.63”
CABLE GROMMET Cable grommets let the cable pass cleanly through ceiling tile and other materials up to 5/8”. Finished in nickel.
Tile
CC-1420-CGLocknut & washer
included
REVISIONS
REV. DESCRIPTION DATE
GRIPLOCK SYSTEMSThis drawing and these specifications are the exclusive property of GRIPLOCK SYSTEMS LLC.and shall not be divulged, reproduced, copied,or used as the basis for the manufacture or saleof apparatus without the express writtenauthorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
1132 Mark Ave., Carpinteria, CA 93013Phone (805) 566-0064 Fax (805) 566-0065
SCALE:
MATERIAL:
PART NUMBER:
REF:
FILE:1:1 ceiling tile cover asm
DESCRIPTION:DATE:DRAWN BY REV
CHECKED BYINT
Unless otherwise specified1. Dimensions are in millimeters2. Tolerances are: All Dimensions .125 Angles 13. Break all edges .125 min4. Finish 1.6 micro millimeters5. Dimensions apply after finish6. Concentricity = .6 TIR
1.00
Q2-14-W
Q4.5-410-W-625
Q4.5-14-W
Q5-410-W-625
Q5-14-W
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
CEILING ATTACHMENTS & HARDWARE 32
HX-T-CLIP-BA1Wrap-around T-bar clip.
1/4-20 x 5/8” stud
HX-T-CLIP-BA-4-16-W “Twist-on” T-bar clip.
1/4-20 x 5/8” stud
HX-T-CLIP-BAX-4-16Scissor T-bar clip.1/4-20 x 5/8” stud
HX-T-CLIP-Q6-WT-bar clip for hook attachment.See page 28 for GHKZ hook
HX-T-CLIP-KEY-WT-bar clip for ball terminal. See page 27 for 80 or 93
terminal
BB-1420-1Bracket bar for 4” J-box.
1/4-20 stud included
TL-CUTTERFelco-type cable cutter.
Cuts ≤ 1/8” cable
CEILING ATTACHMENTS
BB-14IP-1Bracket bar for 4” J-box.
1/4 IPS hollow stud included
BB-UNIVERS-685IDBracket bar for 4” J-box
BB-18IP-1Bracket bar for 4” J- box.
1/8 IPS hollow stud included
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
If this is the first time you’ve worked with Griplock Grippers, PLEASE READ THE FOLLOWING INFORMATION CAREFULLY.
INSTRUCTIONS FOR USEThe information in the charts on pages 33 and 34 is not applicable to any other cable gripping product. Use of Griplock supplied cables is assumed. Weight load guidelines and other specifications are for illustration purposes only. They should not be construed as a warranty that the product or system will conform. Each purchaser is solely responsible for determining (1) that the product and/or system is suitable for the intended application and (2) that the product and/or system complies with all federal, state and local safety and trade laws and regulations. End-users are cautioned that the integrity of the structures to which these components are attached and the fasteners used to attach them are critical to the integrity of the overall system and should therefore be evaluated by a qualified engineer or installer.
• Use only 7x7 or 7x19 uncoated galvanized or stainless steel aircraft cable.
• When feeding cable through a gripper always allow cable to pass 1” beyond the gripper mechanism. When cutting excess cable always leave 1/2” of cable showing. Cable should be cut using purpose-built cutters as shown on page 32.
• Cable will not fray when cut unless passed repeatedly through the gripper mechanism or otherwise overworked. In this case trim the cable and apply a drop of super-glue.
• DO NOT ATTEMPT TO RUN AN ELECTRICAL CURRENT THROUGH THESE CABLES. Use a separate power cord. For information on the Rincon® Powered Suspension System see page 2.
• DO NOT FEED EXCESS CABLE INTO A FIXTURE HOUSING OR J-BOX CONTAINING ELECTRICAL WIRING.
• Adhere strictly to the Weight Load Guidelines on pages 33and 34. Use only gripper / cable combinations for which a safe working load (SWL) has been specified, e.g. 1/16” cable with a Type 15 gripper.
• The Griplock system is generally not recommended for permanent outdoor installations. It should not be exposed to wind or water or allowed to oscillate continuously. Avoid placing fixtures in chemical-laden environments such as indoor swimming pools (for more information on these applications please call our office). Do not place unbraced fixtures close to HVAC vents where they may be exposed to continual air currents. If in any doubt consult a Griplock engineer or sales representative.
ANGLED APPLICATIONS
• Cables should not enter or exit grippers at more than a 5° angle (see illustration at right).
• A pendant load exerts greater force on angled / non-vertical cables than it would on vertical cables.
• To determine the safe working load on an angled cable supporting a load, take the safe working load for the gripper / cable combination from the weight load chart on page 34 and multiply it by the factor from the chart below. For example, for a 1/16” galvanized cable with type 25 Premium gripper at a 45° angle, take the 60 lbs from the weight load chart on page 34 and multiply it by 0.70 from below: 60 lbs x 0.70 = 42 lbs. So 42 lbs will be the safe working load for each suspension at a 45° angle instead of 60lbs for a vertical suspension. Angles beyond 60° are not recommended. For more information about this please call our office.
33 INSTALLATION GUIDELINES
ANGLE FROM VERT. 0° 15° 30° 45° 60° FACTOR 1 0.96 0.86 0.70 0.50
THREAD AND KNOCK OUT (KO) SIZESTHREAD SIZE THREAD DIA. KO SIZE THREAD SIZE THREAD DIA. KO SIZE 1/8IPS = 1/8-27 3/8” 7/16” 1/4IPS = 1/4-18 1/2” 9/16” 3/8IPS = 3/8-18 5/8” 11/16” 1/2IPS = 1/2-14 13/16” 7/8” 10-32 0.19” 3/16” 1/4-20 0.24” 1/4”3/8-16 0.38” 7/16”
M4 5/32” 3/16” M8 5/16” 3/8”M10 3/8” 7/16”M13 1/2” 9/16”M16 5/8” 11/16”
5° max.deviationfrom center line
ph: 805.566.0064 / fx: 805.566.0065 / [email protected] / www.griplocksystems.com
®
WEIGHT LOAD GUIDELINES 34
CABLE DIAMETER PREMIUM GRIPPER TYPEInches mm Type 10 Type 12 Type 15 Type 18 Type 25 Type 30 Type 30
3-Ball 3-Ball 3-Ball 3-Ball 3-Ball 3-Ball 6-BallSafe Working Load in Pounds - 7x7 or 7x19 Galvanized & Stainless Steel Cable
75 / 75110 / 100165 /140300 / 250400 / 350630 / 550670 / N/A
1075 / 1000 1250 / 1125
15 / 15 15 / 15 1.0mm 22 / 20 22 / 20 1.2mm 33 / 28 33 / 28 33 / 28 1/16” 1.6mm 60 / 50 60 / 50 60 / 50 5/64” 2.0mm 80 / 70 80 / 70 2.4mm 126 / 110 126 / 110 126 / 110 2.5mm 134 / N/A 134 / N/A 134 / N/A 1/8” 3.2mm 215 / 200 1/8” 3.2mm 250 / 225
STATIC SAFE WORKING LOADS (SWL) FOR GRIPLOCK® PREMIUM GRIPPERS Safe working loads are 20% of the minimum break strength of the gripper / cable combination Values in BLUE are for stainless steel cables. Values in BLACK are for galvanized cables.
1/32” 3/64”
3/32”
MINIMUM BREAKSTRENGTH FOR
GRIPPER / CABLECOMBINATION
*Figures in these two columns denote Pushmepullyu Grippers and the ZF-30X2 looping gripper when used in a looped configuration. For all other configurations see regular ZF Standard weightload figures.
CABLE DIAMETER ZF STANDARD GRIPPER TYPEInches mm Pushmepullyu* Type 12 Type 15 Type 18 Type 25 Type 30 X2 Loop-it*
ZF-15ZZ 3-Ball 3-Ball 3-Ball 3-Ball 3-Ball ZF-30X2 Safe Working Load in Pounds - 7x7 or 7x19 Galvanized & Stainless Steel Cable
STATIC SAFE WORKING LOADS (SWL) FOR GRIPLOCK® ZF STANDARD GRIPPERS Safe working loads are 20% of the minimum break strength of the gripper / cable combinationValues in BLUE are for stainless steel cables. Values in BLACK are for galvanized cables.
• USE CORRECT WEIGHTLOAD CHART. Griplock’s ZF Standard Grippers (see 2nd chart) can be indentified by the CF marking on the gripper. They have a lower SWL than Griplock Premium Grippers (see 1st chart).
• The 5:1 SWL reflects the US Lighting Industry standard. Where no SWL is shown, grippers and cables are not compatible.• Charts indicate the SWL for gripper / cable combinations when used with 7x7 or 7x19 steel core, uncoated galvanized or stainless
steel aircraft cable. Do not use plastic coated cable.• Charts apply to Griplock Premium or ZF Standard Grippers only. They are not applicable to any other cable gripping product.
MINIMUM BREAKSTRENGTH FOR
GRIPPER / CABLECOMBINATION
PROPRIETARY AND CONFIDENTIAL: The drawings and specifications contained in this publication are the exclusive property of Griplock® Systems, LLC and shall not be divulged, reproduced, copied or used as the basis for the manufacture or sale of apparatus without the express written authorization of Griplock® Systems, LLC.
3/64”1/16”1/16”5/64”3/32”3/32”
1/8”1/8”
1.0mm 19 / 17 95 / 85 1.2mm 25 / 22 25 / 22 125 / 1101.6mm 50 / 45 50 / 45 250 / 2251.6mm 75* / 65* 375* / 325*2.0mm 75 / 65 75 / 65 375 / 3252.4mm 95 / 87 95 / 87 475 / 4352.4mm 160* / 150* 800* / 750*2.5mm 100 / 90 100 / 90 500 / 4502.5mm 170* / N/A 850* / N/A3.2mm 200 / 190 1000 / 9503.2mm 250* / 225* 1250* / 1125*
THREAD SIZE THREAD DIA. KO SIZE THREAD SIZE THREAD DIA. KO SIZE
®
1132 Mark Avenue, Carpinteria, CA 93013
ph: 805.566.0064 / fx: 805.566.0065 / www.griplocksystems.com
Retail Display Systems
®Griplock® Systems
Shelving & Signage Systems
GRIPLOCK® SYSTEMS®
®
Cable Suspension Systems for Signage
INDUSTRIAL APPLICATIONSHAND ADJUSTABLE. NO TOOLS. NO MINIMUM WEIGHT. NO JAMS. NO SWEAT!
GRIPLOCK INDUSTRIALSGI
DIM A
DIM B
CC-1420-T2Cable Coupler w/1/4-20 Internal Thread
1/16" Galvanized7x7 Cable
1/16" Galvanized7x7 Cable
Toggle Plate for1/4" and 5/16" Opening
ZF-15Z-XCCross CableGripper
Cable Terminal
GI-16XCxx-CC-TG-xxx
Cross Cable w/ Cable Coupler & Toggles
2 ASSYS. PER KITBULK PACKAGING AVAILABLE
DIM A DIM BGRIPLOCK P/N
60"6" GI-16XC12-CC-TG-60
120"6" GI-16XC12-CC-TG-120
180"6" GI-16XC12-CC-TG-180
240"6" GI-16XC12-CC-TG-240
60"12" GI-16XC24-CC-TG-60
120" 12" GI-16XC24-CC-TG-120
180" 12" GI-16XC24-CC-TG-180
240" 12" GI-16XC24-CC-TG-240
60"24" GI-16XC48-CC-TG-60
120" 24" GI-16XC48-CC-TG-120
180" 24" GI-16XC48-CC-TG-180
240" 24" GI-16XC48-CC-TG-240
SCALE:FILE:
DATE:
1132 Mark Avenue, Carpinteria, CA 93013
Phone (805) 566-0064 Fax (805) 566-0065
www.griplocksystems.com
GRIPLOCK SYSTEMS
GI-16XCxx-CC-TG-xxx
1:3
This drawing and these specifications are the exclusive property of
GRIPLOCK SYSTEMS LLC and shallnot be divulged, reproduced,
copied, or used as the basis for the manufacture or sale of apparatus
without the express written authorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
DIM A
ZF-15ZZLoop Gripper
1/16" Galvanized
7x7 Cable
Snap-Hook
GI-AG16-ZZ-GHK-xxx
Single Cable w/ Loop Gripper & Snap-Hook
Can be usedinversely
2 ASSYS. PER KITBULK PACKAGING AVAILABLE
DIM AGRIPLOCK P/N
60"GI-AG16-ZZ-GHK-60
120"GI-AG16-ZZ-GHK-120
180"GI-AG16-ZZ-GHK-180
240"GI-AG16-ZZ-GHK-240
SCALE:FILE:
DATE:
1132 Mark Avenue, Carpinteria, CA 93013
Phone (805) 566-0064 Fax (805) 566-0065
www.griplocksystems.com
GRIPLOCK SYSTEMS
GI-AG16-ZZ-GHK-xxx Flyer
1:2
This drawing and these specifications are the exclusive property of
GRIPLOCK SYSTEMS LLC and shallnot be divulged, reproduced,
copied, or used as the basis for the manufacture or sale of apparatus
without the express written authorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
® 2015
DIM B
DIM A
1/16" Galvanized
7x7 Cable
ZF-15ZZ
Pushmepullyu Gripper
Toggle Plate for
1/4" and 5/16" Opening
GI-16Yxx-ZZ-TG-xxx
Y-Cable w/ Pushmepullyu Gripper & Toggles
2 ASSYS. PER KIT
BULK PACKAGING AVAILABLE
DIM ADIM B
GRIPLOCK P/N
60"12"
GI-16Y12-ZZ-TG-60
120"12"
GI-16Y12-ZZ-TG-120
180"12"
GI-16Y12-ZZ-TG-180
240"12"
GI-16Y12-ZZ-TG-240
60"24"
GI-16Y24-ZZ-TG-60
120"24"
GI-16Y24-ZZ-TG-120
180"24"
GI-16Y24-ZZ-TG-180
240"24"
GI-16Y24-ZZ-TG-240
360"24"
GI-16Y24-ZZ-TG-360
SCALE:
FILE:
DATE:
1132 Mark Avenue, Carpinteria, CA 93013
Phone (805) 566-0064 Fax (805) 566-0065
www.griplocksystems.com
GRIPLOCK SYSTEMS
GI-16Yxx-ZZ-TG-xxx Flyer
1:3
This drawing and these specifications are the exclusive property of
GRIPLOCK SYSTEMS LLC and shallnot be divulged, reproduced,
copied, or used as the basis for the manufacture or sale of apparatus
without the express writte
n authorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
DIM B
DIM A
1/16" Galvanized
7x7 Cable
ZF-15ZZ
Pushmepullyu Gripper
Toggle Plate for
1/4" and 5/16" Opening
GI-16Yxx-ZZ-TG-xxx
Y-Cable w/ Pushmepullyu Gripper & Toggles
2 ASSYS. PER KIT
BULK PACKAGING AVAILABLE
DIM ADIM B
GRIPLOCK P/N
60"12"
GI-16Y12-ZZ-TG-60
120"12"
GI-16Y12-ZZ-TG-120
180"12"
GI-16Y12-ZZ-TG-180
240"12"
GI-16Y12-ZZ-TG-240
60"24"
GI-16Y24-ZZ-TG-60
120"24"
GI-16Y24-ZZ-TG-120
180"24"
GI-16Y24-ZZ-TG-180
240"24"
GI-16Y24-ZZ-TG-240
360"24"
GI-16Y24-ZZ-TG-360
SCALE:
FILE:
DATE:
1132 Mark Avenue, Carpinteria, CA 93013
Phone (805) 566-0064 Fax (805) 566-0065
www.griplocksystems.comGRIPLOCK SYSTEMS
GI-16Yxx-ZZ-TG-xxx Flyer1:3
This drawing and these specifications are the exclusive property of
GRIPLOCK SYSTEMS LLC and shallnot be divulged, reproduced,
copied, or used as the basis for the manufacture or sale of apparatus
without the express written authorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
793 Duncan Reidville Rd. Duncan, SC 29334 ph: 805.566.0064 / www.griplocksystems.com