Light is OSRAM · OSRAM, one of the leading light manufacturers in the world, offers intelligent...
Transcript of Light is OSRAM · OSRAM, one of the leading light manufacturers in the world, offers intelligent...
Light is the solution ENCELIUM® Energy Management System Application and Design Guide
Light is OSRAM
www.encelium.com
2
Table of contentsThis brochure is designed as an introductory guide to the ENCELIUM® Energy Management System
and how to incorporate system components into your facility. The typical layout drawings included
herein are meant to provide general examples of how our system can be implemented to achieve
the greatest amount of lighting control in a particular space for optimized energy savings.
Components ENCELIUM Energy Management System 4
ENCELIUM Hardware 6
ENCELIUM System Architecture 10
Table of contents
3
Office
Quality office lighting control may increase a company’s bottom line while improving employee morale. The ENCELIUM® Energy Management System easily adapts to the lighting requirements of any space to maximize lighting energy savings while still allowing employees control of the lighting in their personal workspace.
Private Office 12
Open Office 13
Conference Room 14
Lobby/Reception Area 15
Break Room 16
Storage/Warehouse 17
Education Educational facilities typically consist of a large array of buildings and spaces, each with differing uses and lighting requirements. The ENCELIUM Energy Management System easily adapts to the lighting requirements of any space to maximize lighting energy savings while providing the right amount of light when and where required.
Classroom 23
Laboratory 24
Auditorium 25
Dining Hall 26
Library 27
Gymnasium 28
Healthcare Bringing quality lighting into healthcare facilities positively impacts human health and the performance of patients, visitors and staff. The ENCELIUM Energy Management System easily adapts to the lighting requirements of any space to maximize lighting energy savings while ensuring the comfort and safety of patients and staff.
Patient Room 18
Nurses Station 19
Waiting Room 20
Laboratory 21
Surgical Suite 22
Common Areas The ENCELIUM Energy Management System reduces lighting energy consumption in rooms that are used intermittently.
Rest Room 29
Corridor 30
Storage Room 31
Spaces
ENCELIUM Energy Management System
4
OSRAM, one of the leading light manufacturers in the world, offers intelligent lighting controls in the form of the
ENCELIUM Energy Management System (EMS). The ENCELIUM EMS was designed from the ground up as a
software-based, integrated lighting control and energy management system that dynamically responds to the
changing characteristics of a building by providing the right amount of light when and where required. This
first-of-its kind system allows for building owners and facility managers to provide comfortable lighting to
all occupants despite varying needs, while conserving lighting energy consumption and optimizing lighting
energy savings.
ENCELIUM® Energy Management System
ENCELIUM Polaris 3D® is the central control software application used to commission, configure, and manage the ENCELIUM EMS. It enables configuration of every system parameter in a building for each individual user or space and establishes the baseline settings. The ENCELIUM Polaris 3D software offers enhanced ability to analyze and update lighting layouts from an intuitive and easy-to-use computer inter-face. This brings lighting control to a whole new level, by giving facility managers the ability to easily control individual luminaires, groups of luminaires, entire floors, or even entire buildings right from their desktop or laptop.
The ENCELIUM Polaris 3D software has the ability to display and com-municate energy savings in a variety of formats for any specified period of time. Reports generated can focus on an entire building all the way down to an individual luminaire, show overall savings or be broken down by energy management strategy. This type of granular control can help identify lighting-related inefficiencies or operational anomalies anywhere in a facility.
Features & Benefits
— Intuitive, user-friendly software that shows an interactive, 360° 3D building view
— Generates real-time energy savings data in formats ranging from kWh to dollars
— Provides users with the ability to easily adjust lighting layouts without physical rewiring of your multi-facility campus
— Change set points and time schedules for multiple zones as desired right from your web browser
— Easy detection of lighting status, consumption and energy trends from colorized lighting system data representation
Smart control strategies
The ENCELIUM Energy Management System (EMS) is the only lighting control system that seamlessly employs these energy management strategies simultaneously.
— Smart time scheduling — Daylight harvesting — Task Tuning — Occupancy Control — Variable Load Shedding — Personal Control — Plug Load Control
The ENCELIUM EMS provides maximum energy savings when combining the above smart control strategies as well as other energy savings tech-niques. It can be integrated with other building management systems including HVAC, shade control and fire alarm systems for further controlla-bility. Further savings can be generated through controlling emergency lighting. This system is continually upgraded to integrate new features and strategies to maximize controllability now and into the future.
ENCELIUM Energy Management System
5
ENCELIUM GreenBus IIENCELIUM GreenBus II is a two-wire communica-tion platform for supplying data and power to the ENCELIUM Energy Management System. This next generation bus system dramatically raises the capability to deliver power to sensors and wall-stations while increasing the number of devices supported by a single ENCELIUM Energy Control Unit (ECU). ENCELIUM GreenBus II includes enhanced troubleshooting features such as the ability for the system to detect and locate field bus communication faults via the ENCELIUM Polaris 3D® software.
Features & Benefits
— Individual dimming control of thousands of luminaires — Integrates analog 0-10V dimming ballasts/drivers, standard non-dimming ballasts/drivers and DALI-based systems
— BACnet® compatible for easy integration with other building automation systems, such as HVAC, fire and security
— Integrates sensors and relay-based controls into a one flexible control system
— Installs quickly and easily
Innovative Communication NetworksENCELIUM® Energy Management Systems use the following networks: ENCELIUM GreenBus II®, Wireless
Mesh based on ZigBee® standards, or DALI (Digital Addressable Lighting Interface). These are cross plat-
form systems that are compatible with each other so that you are no longer locked into a single, proprietary
system. This not only offers flexibility but can scale to meet any need. These diverse options allow wired
and wireless networks to integrate into hybrid ecosystems.
ENCELIUM Wireless Network OSRAM is a member of the ZigBee Alliance. ENCELIUM's Wireless Energy Management System is based on open and interoperable ZigBee standards. This allows you to locate sensors and wallstations in hard-to-reach locations because no wiring is required. Each Wireless Manager can control up to 100 nodes allowing you the flexibility to provide cost effective controls to a variety of locations. The new wireless system includes enhancements to the ENCELIUM Polaris 3D® software that includes auto-backup to a Micro SD card, IP address recovering mechanism, and battery status view for wireless devices.
The ENCELIUM Energy Management System (EMS) communicates via a mesh
network based on ZigBee standards on the second floor and via an ENCELIUM
GreenBus II communication network on the first floor. The drawing shows a hybrid
system incorporating both wired and wireless components. Sensors, wallstations,
touchscreens and relays may all be incorporated into the ENCELIUM system.
FLO
OR
1FL
OO
R 2
Max ambient temperature +50ºCInput: Class 2 Only24V AC, 50/60Hz, min 40VA Relay Panel ModuleEN-RPM-24C-GB2
Install per installation instruction sheet and electrical & building codes. Connect to ENCELIUM GreenBusII System only.CAUTION - To Reduce the Risk of Fire or Electric Shock Do Not Interconnect The Outputs Of Different Class 2 Circuits85-116-DA
Item No 45268
Q1Q2Q3Q4Made in Canada2012201320142015Emergency Lightingand Power EquipmentEnergy Management Equipment Subassembly6NA8
Ethernet Switch
Line Power
Relay Panel
Line Power & Dimming
Emergency All On
Backup
1 2 3 4 5 6 7 8 to USB Restore from USB Installation Mode Cycle 100% 25% 0%
Con�rm
F5
F6
F7
Switch Leg
LCD Touch Screen
Ethe
rnet
Net
wor
k
WWW
PoE Injector
Router
Wireless Manager
Cont
rol W
ire
AC Phase CutDimming Fixtures
Ethernet Connections Luminaire with LCMLegend
Wallstation
WWW
Remote access for commissioningand technical support
Occupancy Sensor with SIM
Photo Sensor with SIM
PoE Connections
Wireless Wallstation
Wireless SensorLuminaire with WCM
ECU G4SSU
Polaris 3D®/PCS™/CarbonWatch™
Polaris 3D®/PCS™/CarbonWatch™
PCDM (AC Phase CutDimming Luminaires)
Luminaire with ALC(Switch Leg/Group Control)
Line PowerENCELIUM® GreenBus II
DALI (Digital Addressable Lighting Interface) Network DALI is an international standard, firmly estab-lished all over the world. Created specifically for digital lighting control, it provides a single interface for all electronically controlled light sources in an easy-to-install and versatile system. It has almost unlimited scalability, is easy to manage and is very cost-effective through energy savings. DALI Is a daisy chain communication standard that supplies data and power to the system components.
FLO
OR
1FL
OO
R 2
Max ambient temperature +50ºCInput: Class 2 Only24V AC, 50/60Hz, min 40VA Relay Panel ModuleEN-RPM-24C-GB2
Install per installation instruction sheet and electrical & building codes. Connect to ENCELIUM GreenBusII System only.CAUTION - To Reduce the Risk of Fire or Electric Shock Do Not Interconnect The Outputs Of Different Class 2 Circuits85-116-DA
Item No 45268
Q1Q2Q3Q4Made in Canada2012201320142015Emergency Lightingand Power EquipmentEnergy Management Equipment Subassembly6NA8
Ethernet Switch
Line Power
Relay Panel
Line Power & Dimming
Emergency All On
Backup
1 2 3 4 5 6 7 8 to USB Restore from USB Installation Mode Cycle 100% 25% 0%
Con�rm
F5
F6
F7
Switch Leg
LCD Touch Screen
Ethe
rnet
Net
wor
k
WWW
PoE Injector
Router
Wireless Manager
Cont
rol W
ire
AC Phase CutDimming Fixtures
Ethernet Connections Luminaire with LCMLegend
Wallstation
WWW
Remote access for commissioningand technical support
Occupancy Sensor with SIM
Photo Sensor with SIM
PoE Connections
Wireless Wallstation
Wireless SensorLuminaire with WCM
ECU G4SSU
Polaris 3D®/PCS™/CarbonWatch™
Polaris 3D®/PCS™/CarbonWatch™
PCDM (AC Phase CutDimming Luminaires)
Luminaire with ALC(Switch Leg/Group Control)
Line PowerENCELIUM® GreenBus II
ENCELIUM Hardware
6
Function
ENCELIUM® Hardware
Description
ENCELIUM GreenBus II® Communication Network
Sensors
Provides low voltage power to all
devices on the network eliminating
the need for external power supplies.
Collects information from lighted
space on occupancy or daylight.
— Enables cost effective, individual dimming
control of thousands of luminaires in a building.
— Integrates peripheral devices such as occu-
pancy sensors, photo sensors, wallstations
and lighting controllers…etc.
— Originates at an Energy Control Unit and
typically propagates in a daisy-chain fashion
from device to device.
— Integrates wired devices into a wireless
system to create a hybrid system.
— Collects occupancy and daylight information
using Passive Infra-Red (PIR) wireless sensors
with integral photosensor.
— Collects occupancy information using PIR or
dual tech (PIR/Ultrasonic) wired sensors with
wall or ceiling mount options.
— Allows sensor settings to be adjusted through
Polaris 3D® Software for maximum savings.
Wireless Manager (WM) Collects information from sensors
and wallstations.
— Adjusts appropriate brightness levels and
ON/OFF status for each luminaire and zone.
— Determines what action to take based on
status signals from sensors.
Energy Control Unit (ECU) Collects information from photo
sensors, occupancy sensors, and
wall mounted lighting controllers.
— Adjusts appropriate brightness levels and
ON/OFF status for each luminaire and zone.
— Determines what action to take based on
status signals from sensors.
System Support Unit (SSU) Acts as the database server
for all data related to an
ENCELIUM system.
— Stores all system settings and parameters
and logs historical data regarding operational
and energy savings results.
— Provides the ability to remotely access the
ENCELIUM system in order to change system
settings or configurations, analyze system
performance and energy data, and trouble-
shoot any problems.
ENCELIUM Hardware
7
Wireless/Wired Area Lighting Controller (WALC/ALC)
Sensor Interface Module (SIM)
Wireless/Area Lighting Controller (WALC/ALC)
Dual Relay Luminaire Control Module
Function
Provides an interface between
occupancy or photo sensors and
the ENCELIUM GreenBus II
communication network.
Provides a high power switching and
dimming interface between a group
of luminaires and the ENCELIUM
network.
Provides the switching capability
of two LCM modules in a single
package as an interface between
luminaires and the ENCELIUM EMS.
Description
— Enables each sensor to be independently
controlled and configured to best meet the
needs of the facility.
— Automatically detects and adjusts itself
to the type of sensor to which it is wired.
— Establishes a two-way communication between
the Energy Control Unit (ECU) and itself.
— Switches a single wired zone of multiple
luminaires ON or OFF while setting the zone’s
overall light level with a 0-10V dimming output
wired to the dimming ballasts or LED drivers
of the luminaires.
— Can switch an entire circuit of electrical
loads and is suitable for general purpose
plug load control.
— Replaces the need for standard power relays
or switch packs.
— Enables inboard/outboard switching, step
dimming or two luminaire switching by
controlling two AC loads independently.
— Can be connected to power relays or switch
packs in order to switch larger electrical loads.
Luminaire Control Module (LCM) Provides an interface between
ballasts, LED drivers and the
ENCELIUM GreenBus II
communication network.
— Enables each ballast or LED driver to be
independently controlled and configured
to best meet the needs of the facility.
— Switches or dims luminaire based on two-way
communication with ECU.
— Can switch or dim any conventional 0-10V
dimming ballast, non-dimming ballast,
LED driver, or 0-10V LED driver.
Wireless Control Module (WCM) Provides an interface between
luminaires, sensors and the wireless
network.
— Enables each ballast or LED driver to be
independently controlled and configured
to best meet the needs of the facility.
— Switches or dims luminaire based on two-way
communication with WM.
— Can switch or dim any conventional 0-10V
dimming ballast, non-dimming ballast,
LED driver, or 0-10V LED driver.
— Enables each sensor to be independently
controlled and configured to best meet the
needs of the facility.
— Enables ENCELIUM® GreenBus II® devices
to become part of wireless network.
ENCELIUM Hardware
8
Function Description
Three-Zone Wallstation
Two Button Wallstation
Industrial Push Button
Touch Screen Panel
Provides ON/OFF switching for up
to three lighting zones configured
through the ENCELIUM Polaris 3D
software.
Provides local ON/OFF and dimming
control for a single zone configured
through the ENCELIUM Polaris 3D
software.
Provides local ON/OFF control over
a single lighting zone configured
through the ENCELIUM Polaris 3D
software.
Allows the ENCELIUM EMS to be
controlled with an interactive 7"
flush-mount LCD touch screen display.
— “Activates” or “de-activates” a lighting zone
indicated by an LED display with white
indicating ON and blue indicating OFF.
— Where lighting zones are controlled by a time
schedule, this wallstation can override the
time schedule by simply “re-activating” the
zone about to be shut down.
— Available in ENCELIUM GreenBus II or
wireless models.
— A short press of the upper/lower buttons
turns lighting ON/OFF while a “press and
hold” dims lighting up or down.
— Where lighting zones are controlled by a time
schedule, this wallstation can override the
time schedule by the press of the upper
button which “re-activates” the zone about
to be shut down.
— Available in ENCELIUM GreenBus II or
wireless models.
— “Activates” or “de-activates” a lighting zone
indicated by an LED display with white
indicating ON and blue indicating OFF.
— Where lighting zones are controlled by a time
schedule, this wallstation can override the
time schedule by simply “reactivating” the
zone about to be shut down. During shut
down mode, the wallstation will alternately
flash blue and white LEDs to indicate to
occupants that an override is necessary.
— Provides the ability to recall multiple scenes
for a given zone.
— Ideal for large multi-purpose spaces where
lighting requirements vary throughout the day.
Three-Scene Wallstation Provides customized light level
control for a single lighting zone.
— Allows the user to select three pre-pro-
grammed light levels or “scenes” for a single
zone by the push of a button.
— Scene configuration is programmed and
changed through the ENCELIUM® Polaris 3D®
software.
— Available in ENCELIUM GreenBus II®
or wireless models.
ENCELIUM Hardware and Software
9
Function Description
Personal Control Software (PCS)
ENCELIUM® Polaris 3D®
CarbonWatch Software
BACnet Interface Module
Web-based application, featuring an
interactive three-dimensional view
of a building or complex in real-time.
Application which enables individuals
in a building to control lighting levels
in their workspace from their own
desktop PC.
Displays the energy and carbon
reduction performance of a building
controlled by the ENCELIUM EMS.
Enables the integration of the
ENCELIUM EMS with any BACnet
compatible building automation
system.
— Facility managers are now able to see an
entire facility or complex in a convenient
3D snapshot allowing for faster and easier
navigation to desired control zones.
— Provides an enhanced user experience
and allowing access to the system from
a web browser.
— User can control and preset the light levels
of each luminaire or group of luminaires in
their workspace.
— PCS is installed on a user’s local computer
and can be accessed by clicking on a light
bulb icon appearing in the system tray found
on the lower right hand side of the PC screen.
— CarbonWatch is a slide show that can be
customized to show sustainability data,
highlight corporate initiatives and foster
awareness for lighting conservation.
— The CarbonWatch software runs off a
network connection to the ENCELIUM EMS.
— The ENCELIUM EMS operates autonomously
while lighting status, light levels and energy
usage are all shared and can be controlled
via BACnet.
— Connects to HVAC, fire, and security
systems.
AV Interface Resides on SSU, allowing the
integration of audio-visual systems
to the ENCELIUM EMS.
— Allows various scenarios for a given space
by changing lighting, audio and visual to
achieve a desired atmosphere.
— In many cases, these scenarios can be
recalled through an interactive touch screen.
ENCELIUM System Architecture
10
To Internet or LAN
Energy Control Unit
System Support Unit
ENCELIUM Polaris 3D® Software
— Each luminaire, sensor and wallstation is connected back to the Energy Control Unit (ECU) or Wireless Manager (WM).
— All components are individually addressable and networked back to an Energy Control Unit (ECU) or Wireless Manager (WM).
— The System Support Unit (SSU) stores system settings and logs historical data, enabling the ENCELIUM EMS to analyze system performance and energy information.
— Internet or LAN connection allows floor plan based control software to be operated anywhere on the network.
— Changes to lighting layouts are made through the ENCELIUM Polaris 3D® software.
— Through the Advanced Energy Reporting Module, the ENCELIUM Polaris 3D software generates energy savings in a variety of graphical formats for any specified period of time or building area.
System ArchitectureThe software-based ENCELIUM® EMS networks stand-alone lighting components through intelligent
hardware creating an integrated lighting control and energy management system for optimal savings.
and/or
ENCELIUM System Architecture
11
Occupancy Sensors
— Occupancy sensor settings are configurable through the ENCELIUM Polaris 3D® software.
— Set time delay to the minimum on occupancy sensors connected to the ENCELIUM EMS. Time delays are set through the ENCELIUM Polaris 3D software. With the ENCELIUM EMS, occupancy sensors employ aggressive time-outs by using a two-stage occupancy sensing fea-ture. Luminaires in a zone are in “dim” status in response to lengths of time where no occupancy is detected and turn bright in response to occupancy detection.
— The ENCELIUM EMS also provides Personal Control Software which acts as a virtual occupancy sensing feature at individual work stations.
— Occupancy sensors should be placed out of the line-of-sight of doorways, office furniture and decoration.
Comfort Zones
— The ENCELIUM system allows for the creation of “comfort” or “support” zones in areas adjacent to occupied rooms to ensure that occupants are not isolated for both comfort and safety.
— Examples of “comfort zones” would be the areas immedi-ately outside of a private office, corridors leading to exits, and elevators.
— With the ENCELIUM Energy Management System, all of these comfort zones can be grouped with the same master zone. When lights in a master zone are ON, lights in a comfort zone remain ON at a reduced level. Comfort zones are created through the ENCELIUM Polaris 3D software.
Photo Sensors
— Utilizing networked photo sensors, the Energy Control Unit reduces artificial light levels when natural daylight is available and maintains a steady light level when subjected to fluctuating daylight conditions where 0-10V dimming ballasts and/or drivers exist. Areas with fixed output ballasts and/or drivers energize when natural daylight falls below the foot-candle levels specified.
— The ENCELIUM system utilizes light level inputs from common and/or remote sensor locations to minimize the number of photo sensors required. If the office is part of a multi-floor building, then the weighted value of photo sensor readings (the floors just above and just below the office location) is considered to control lighting in order to economize the sensor usage.
— Light level sensor parameters are configurable through the ENCELIUM Polaris 3D software. Photo sensors should be placed in areas where their line-of-sight is not blocked by furniture or decoration.
With the ENCELIUM EMS, a comfort zone supports one or more
master zones. Luminaires are grouped into zones as appropriate
and customized to optimize energy savings.
Sensor Integration & Comfort ZonesThe ENCELIUM® EMS uses occupancy/vacancy sensors, photo sensors, and comfort zones
to integrate entire floors and achieve a massive reduction in lighting energy consumption.
Master Zone
Master ZoneComfort Zone
Office | Private Office
12
Private OfficeThe ENCELIUM® Energy Management System helps
reduce lighting energy consumption while providing the
flexibility to adjust light levels for a wide range of tasks
and personal preferences.
Features — Occupants can recall customizable preset lighting scenes in their workspace from their personal computers using the ENCELIUM Personal Control Software
— Networked photo sensors enable the ENCELIUM EMS to adjust artificial light based on the availability of natural daylight
— Private offices have “comfort zones” assigned to them that remain ON when offices are occupied after regular business hours
Office
Wireless network
The Wireless Control Module (WCM) enables each
luminaire to be independently controlled and configured
through the ENCELIUM Polaris 3D software
ENCELIUM Hardware Components Shown:
ENCELIUM GreenBus II® Cable
Sensor Interface Module (SIM)
Occupancy Sensor
Wireless Control Wireless Sensor
Two Button Wallstation
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D® CarbonWatch
Office | Open Office
13
Wireless network
The Wireless Control Module (WCM) enables each
luminaire to be independently controlled and configured
through the ENCELIUM Polaris 3D software
Recommended ENCELIUM Software:
Open OfficeThe ENCELIUM® Energy Management System reduces lighting energy consumption
in areas where multiple employees work, each with differing lighting preferences.
Features — Group luminaires into zones through the ENCELIUM Polaris 3D® software and control zones with the Three-Zone Wallstation
— Send occupancy information from the ENCELIUM EMS to Building Management Systems (HVAC, fire, security) with the BACnet Interface Module
— With the ENCELIUM EMS, lighting is scalable to accommodate future changes or upgrades as your office space changes
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Sensor Interface Module (SIM)
Occupancy Sensor
Three-Zone Wallstation
ENCELIUM Polaris 3D® BACnet Interface Module Personal Control Software
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
GreenBus II network
The Luminaire Control Module (LCM) enables each luminaire to be
independently controlled and configured through the ENCELIUM
Polaris 3D software
ENCELIUM Hardware Components Shown:
Office | Conference Rooms
14
Recommended ENCELIUM Software:
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Sensor Interface Module (SIM)
Occupancy Sensor
Three-Scene Wallstation
ENCELIUM Polaris 3D® BACnet Interface Module
ENCELIUM Hardware Components Shown:
Conference RoomsThe ENCELIUM® Energy Management System reduces lighting
energy consumption while providing a wide customizable array
of lighting configurations and levels to suit a variety of tasks.
Features — Tailor light levels and configurations to best suit the use of the space: – Presentation – Meeting – Video Conferencing – Projected Presentation
— Recall customizable preset lighting scenes with the Three-Scene Wallstation
— Send occupancy information from the ENCELIUM EMS to Building Management Systems (HVAC, fire, security) with the BACnet Interface Module
GreenBus II network
The Luminaire Control Module (LCM) enables each luminaire to be
independently controlled and configured through the ENCELIUM
Polaris 3D software
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Office | Lobby/Reception Area
15
Lobby/Reception AreaThe ENCELIUM® Energy Management System reduces lighting
energy consumption while ensuring the comfort of all office visitors.
Features
— Switch light levels ON/OFF with the Two Button Wallstation or “press and hold” to dim light levels up or down
— Set time schedules for light levels through the ENCELIUM Polaris 3D® software
— Showcase your energy savings and carbon footprint reduction with ENCELIUM CarbonWatch
ENCELIUM Hardware Components Shown:
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Wireless/Area Lighting Controller (WALC/ALC)
Two Button Wallstation
Wireless Control Module (WCM)
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D® CarbonWatch
CarbonWatch
GreenBus II network The Area Lighting Controller (ALC) enables group control of luminaires where individual control is not necessary
Wireless network The Wireless Area Lighting Controller (WALC) enables group control of luminaires where individual control is not necessary
CarbonWatch3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
CarbonWatch
Wireless/Wired Area Lighting Controller (WALC/ALC)
16
ENCELIUM Hardware Components Shown:
ENCELIUM GreenBus II® Cable
Area Lighting Controller (ALC)
Sensor Interface Module (SIM)
Occupancy Sensor Two Button Wallstation
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D®
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Break RoomThe ENCELIUM® Energy Management System reduces lighting energy consumption
in areas that are used intermittently.
Features
— Networked occupancy sensors enable the ENCELIUM EMS to ensure lights remain ON/OFF or dimmed based on occupancy
— Set maximum level of brightness for luminaires in the space with ENCELIUM Polaris 3D® software
— Switch light levels ON/OFF with the Two Button Wallstation or “press and hold” to dim light levels up or down
GreenBus II network
The Area Lighting Controller (ALC) enables
group control of luminaires where individual
control is not necessary
Office | Break Room
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
17
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
Storage/WarehouseThe ENCELIUM® Energy Management System reduces
lighting energy consumption while still providing the right
amount of light required to work safely.
Features
— Networked occupancy sensors enable the ENCELIUM EMS to switch between two light levels based on occupancy
— Manually turn lights ON/OFF with the rugged stainless steel housing of the Industrial Push Button Wallstation or with the Two Button Wallstation
— Designate areas for load shedding to shave electrical demand during peak hours with the ENCELIUM Polaris 3D® software
ENCELIUM GreenBus II® Cable
Dual Relay Luminaire Control Module
Occupany Sensor
Sensor Interface Module (SIM)
Industrial Push Button
Two Button Wallstation
Wireless Control Module (WCM)
ENCELIUM Polaris 3D®
GreenBus II network
The Dual Relay Luminaire Control Module enables each luminaire
to be independently controlled and configured through the software
Wireless network
The Wireless Control Module (WCM) enables each luminaire
to be independently controlled and configured through the software
Office | Storage/Warehouse
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Healthcare | Patient Room
18
Patient RoomThe ENCELIUM® Energy Management System reduces lighting
energy consumption in areas that are operational 24 hours a day
while individual patients recover on unique schedules.
Features
— Give patients the option to adjust light levels to suit their needs by linking patient call button systems with lighting
— Networked photo sensors enable the ENCELIUM EMS to adjust artificial light based on the availability of natural daylight
— Set time schedules for light levels based on natural circadian rhythms with ENCELIUM Polaris 3D® software
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Sensor Interface Module (SIM)
Occupancy Sensor
Photo Sensor
Three-Scene Wallstation
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
GreenBus II network
The Luminaire Control Module (LCM) enables
each luminaire to be independently controlled
and configured through the ENCELIUM Polaris
3D software
Healthcare
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D®
Healthcare | Nurses Station
19
Nurses StationThe ENCELIUM® Energy Management System gives nurses localized
control of hospital lighting from their personal workspaces.
Features
— Maintain local manual control of lighting in hospital wing for patient management and handling of medicine with the Three-Zone Wallstation
— Tailor light levels based on personal preference from work station computer with ENCELIUM Personal Control Software
— Set time schedules for light levels based on visiting hours and quiet times with the ENCELIUM Polaris 3D® software
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Three-Zone Wallstation
GreenBus II network
The Luminaire Control Module (LCM) enables each luminaire
to be independently controlled and configured through the
ENCELIUM Polaris 3D software
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D® Personal Control Software (PCS)
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Healthcare | Waiting Room
20
CarbonWatch
Waiting RoomThe ENCELIUM® Energy Management System reduces lighting energy
consumption while ensuring the comfort of all hospital visitors.
Features
— Create lighting scenes by lowering light to reduce stress levels with the ENCELIUM Polaris 3D® software
— Load shed to shave electrical demand during peak hours — Showcase your energy savings and carbon footprint reduction with ENCELIUM CarbonWatch
GreenBus II network
The Luminaire Control Module (LCM) enables each luminaire to be
independently controlled and configured through the software
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Touch Screen Panel Wireless Control Module (WCM)
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D® CarbonWatch AV Interface
CarbonWatch
To Ethernet Switch
PoE
Wireless network
The Wireless Control Module (WCM) enables each luminaire to be
independently controlled and configured through the software
CarbonWatch
Healthcare | Laboratory
21
LaboratoryThe ENCELIUM® Energy Management System reduces lighting energy consumption while
providing a wide array of lighting configurations and light levels to suit a variety of tasks.
Features
— Recall customizable preset lighting scenes with the Three-Scene Wallstation
— Networked occupancy sensors enable the ENCELIUM EMS to ensure lights remain ON/OFF or dimmed based on occupancy
— Different zones are easily established and updated through the ENCELIUM Polaris 3D® software to reduce light levels in favor of energy savings where luminance requirements are variable
GreenBus II network
The Luminaire Control Module (LCM) enables each luminaire
to be independently controlled and configured through the
ENCELIUM Polaris 3D software
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Sensor Interface Module (SIM)
Occupancy Sensor
Three-Scene Wallstation
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D®
22
Healthcare | Surgical Suite
ENCELIUM Hardware Components Shown:
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Area Lighting Controller (ALC)
Touch Screen Panel
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D®
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Surgical SuiteThe ENCELIUM® Energy Management System reduces lighting
energy consumption while providing control of ambient lighting
for optimal viewing of the surgical field.
Features
— Using the ENCELIUM Touch Screen Panel, focus attention to certain areas by recalling customizable preset lighting scenes: – Prep/Set-Up – Procedures – Post-Op Cleaning
— Integrate audio-visual systems into the ENCELIUM EMS for access to music or video conferencing
— With the ENCELIUM EMS, lighting is scalable to accommodate future changes or upgrades
GreenBus II network
The Luminaire Control Module (LCM) and Area Lighting Controller (ALC)
enables each luminaire or group of luminaires to be independently
controlled and configured through the ENCELIUM Polaris 3D software
Education | Classroom
23
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
ENCELIUM GreenBus II® Cable
Sensor Interface Module (SIM)
Occupancy Sensor
Photo Sensor
Area Lighting Controller (ALC)
Three-Scene Wallstation
Two Button Wallstation
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D® Personal Control Software (PCS)
ClassroomThe ENCELIUM® Energy Management System enables the easy selection
of lighting scenes to direct student attention and create a stimulating
learning environment.
Features
— Teachers can easily recall customizable preset lighting scenes for common activities to create an engaging learning environment from their classroom computer using ENCELIUM Personal Control Software
— Networked photo sensors enable the ENCELIUM EMS to adjust artificial light based on the availability of natural daylight
— Networked occupancy sensors enable the ENCELIUM EMS to ensure lights remain ON/OFF or dimmed based on occupancy
Education
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
GreenBus II network The Area Lighting Controller (ALC) enables group control of luminaires where individual control is not necessary
Education | Laboratory
24
LaboratoryThe ENCELIUM® Energy Management System reduces lighting
energy consumption while providing a wide array of lighting
schemes and light levels to suit a variety of tasks.
Features
— Recall customizable preset lighting scenes with the Three-Scene Wallstation
— Lighting zones can be established through the ENCELIUM Polaris 3D® software to illuminate areas differently to suit the needs of students and staff
— Adjust light levels as needed for testing and examinations with the ENCELIUM Three-Scene Wallstation
GreenBus II network
The Luminaire Control Module (LCM) enables each luminaire to be
independently controlled and configured through the software
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Sensor Interface Module (SIM)
Occupancy Sensor
Three-Scene Wallstation
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D®
25
AuditoriumThe ENCELIUM® Energy Management System enables the easy
selection of lighting scenes to direct focus and attention while
simultaneously reducing lighting energy consumption.
Features
— Recall customizable preset lighting scenes to best focus student attention for the current activity using the ENCELIUM Touch Screen Panel
— Networked occupancy sensors enable the ENCELIUM EMS to ensure lights remain ON/OFF or dimmed based on occupancy
— Send occupancy information from the ENCELIUM EMS to Building Management Systems (HVAC, fire, security) with the BACnet Interface Module
GreenBus II network
The Luminaire Control Module (LCM) enables each luminaire to be independently
controlled and configured through the ENCELIUM Polaris 3D software
Education | Auditorium
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Sensor Interface Module (SIM)
Occupancy Sensor
Touch Screen Panel
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D® BACnet Interface Module AV Interface
Education | Dining Hall
26
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Sensor Interface Module (SIM)
Photo Sensor
Area Lighting Controller (ALC)
Two Button Wallstation
ENCELIUM Hardware Components Shown:
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D®
Dining HallThe ENCELIUM® Energy Management System allows you to set an array of lighting scenes
to suit the time of day while still ensuring the comfort of student and staff diners.
Features
— Set time schedules for light levels through the ENCELIUM Polaris 3D® software
— Networked photo sensors enable the ENCELIUM EMS to adjust artificial light based on the availability of natural daylight
— Group luminaires into zones through the ENCELIUM Polaris 3D software to set desired light levels
GreenBus II network
The Luminaire Control Module (LCM) enables each luminaire to be
independently controlled and configured through the ENCELIUM
Polaris 3D software
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Education | Library
27
Wireless Control Module (WCM)
Photo Sensor
Three-Zone Wallstation
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D® BACnet Interface Module
LibraryThe ENCELIUM® Energy Management System maximizes energy savings
in a building or space with extended hours and sporadic occupancy while
maintaining a safe and secure environment for students and faculty.
Features
— Networked photo sensors enable the ENCELIUM EMS to adjust artificial light based on the availability of natural daylight
— Appeal to different personal preferences and study habits by creating areas with different illumination levels through the ENCELIUM Polaris 3D® software
— Create “secure zones” for spaces such as restrooms, lounge areas and exits to ensure student and faculty safety at night
Wireless network
The Wireless Control Module (WCM) enables each luminaire to be
independently controlled and configured through the ENCELIUM
Polaris 3D software
3 Zone
Education | Gymnasium
28
ENCELIUM GreenBus II® Cable
Luminaire Control Module (LCM)
Sensor Interface Module (SIM)
Occupancy Sensor
Three-Zone Wallstation
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D® BACnet Interface Module
GymnasiumThe ENCELIUM® Energy Management System reduces lighting energy
consumption while setting light configurations as needed for specific activities.
Features
— Networked occupancy sensors enable the ENCELIUM EMS to ensure lights remain ON/OFF or dimmed based on occupancy
— Eliminate glare and uneven illumination by setting maximum light levels through the ENCELIUM Polaris 3D® software
— Group luminaires into zones through the ENCELIUM Polaris 3D software and control zones with the Three-Zone Wallstation
GreenBus II network
The Luminaire Control Module (LCM) enables each luminaire
to be independently controlled and configured through the
ENCELIUM Polaris 3D software
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Common Areas | Rest Room
29
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D® BACnet Interface Module
ENCELIUM Hardware Components Shown:
ENCELIUM GreenBus II® Cable
Sensor Interface Module (SIM)
Occupancy Sensor
Area Lighting Controller (ALC)
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Rest RoomThe ENCELIUM® Energy Management System ensures that lights
are only ON when occupancy is detected.
Features
— Networked occupancy sensors enable the ENCELIUM EMS to ensure lights remain ON/OFF or dimmed based on occupancy
— Send occupancy information from the ENCELIUM EMS to Building Management Systems (HVAC, fire, security) with the BACnet Interface Module to operate bathroom fan
— Load shed in pre-determined areas to shave electrical demand during peak hours with the ENCELIUM Polaris 3D® software
Common Areas
GreenBus II network
The Area Lighting Controller (ALC) enables group control of luminaires
where individual control is not necessary
Common Areas | Corridor
30
ENCELIUM GreenBus II® Cable
Wireless/Area Lighting Controller (WALC/ALC)
Three-Zone Wallstation
Wireless Control Module (WCM)
ENCELIUM Hardware Components Shown:
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D®
CorridorThe ENCELIUM® Energy Management System will reduce lighting energy
consumption while ensuring the safety and security of all building occupants.
Features
— With the ENCELIUM Polaris 3D® software, designate hallways as “comfort zones” in relation to offices and main areas so lighting remains ON as long as occupancy is detected in master zones for both comfort and safety
— Set time schedules for light levels through the ENCELIUM Polaris 3D software
— Load shed in pre-determined areas to shave electrical demand during peak hours with ENCELIUM Polaris 3D software
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
3 Zone
GreenBus II network The Area Lighting Controller (ALC) enables group control of luminaires where individual control is not necessary
Wireless network The Wireless Area Lighting Controller (WALC) enables group control of luminaires where individual control is not necessary
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Wireless/Wired Area Lighting Controller (WALC/ALC)
Common Areas | Storage Room
31
Recommended ENCELIUM Software:
ENCELIUM Polaris 3D®
ENCELIUM Hardware Components Shown:
ENCELIUM GreenBus II® Cable
Sensor Interface Module (SIM)
Occupancy Sensor
Area Lighting Controller (ALC)
Industrial Push Button
3 Scene 3 Zone
Luminaire Controle Module
Sensor Interface Module
Multi Tech Occupancy Sensor
Area Lighting controller
Touch Screen
Storage RoomThe ENCELIUM® Energy Management System ensures that lights
are only ON when occupancy is detected.
Features
— Networked occupancy sensors enable the ENCELIUM EMS to ensure lights remain ON/OFF or dimmed based on occupancy
— Manually turn lights ON/OFF with the rugged stainless steel housing of the Industrial Push Button Wallstation
— Load shed in pre-determined areas to shave electrical demand during peak hours with the ENCELIUM Polaris 3D® software
GreenBus II network
The Area Lighting Controller (ALC) enables group control of luminaires
where individual control is not necessary
OSRAM and Logo are registered trademarks of OSRAM GmbH.ENCELIUM, GreenBus II and Polaris 3D are registered trademarks of OSRAM SYLVANIA Inc. BACnet is a registered trademark of ASHRAE.All other trademarks are the property of their respective owners.
www.encelium.com
© 2016 OSRAM
LMS095R2 4-16
Americas Headquarters
200 Ballardvale Street
Wilmington, MA 01887 USA
Phone 1-888-531-7573
www.encelium.com