Lifecycle Information Services Basic (machine) -...

Lifecycle Information Services Basic (machine)

Product Status Information Report

Uw bedrijf System evaluation

Vestigingsplaats

1/13/2017

SIEMENS Product Status Information Report

Generated using PridaNet V1.5 HF1 (x64) / 34

Customer: Uw bedrijf

Plant:

Plant IDs:

System: Productiehal 2

Processed by: Susan van Nierop

Validity of the recorded data: 1/13/2017

Analysis report created on: 1/13/2017

By performing a regular availability analysis, supply bottlenecks can be identified in plenty of time, the current delivery situation of the Siemens components used can be determined and recommendations for action required can be given.

The following table shows you the current status of your plants. You will find the explanations of the machine categories under Legends/Machine categories.

Equipment Machine category

Main Automation, Network, HMI & Drives Business Critical

A regular availability evaluation therefore helps to

Maintain serviceability

Avoid supply bottlenecks

Show how to achieve long-term availability of spare parts, and therefore

Plan required measures and modernization at an early stage

Contact person in sales:

Name Telephone E-mail Country

Verkoop industriele producten 070 – 333 35 15 [email protected] NL

Contact person in service:


Service industriele producten 070 – 333 35 35 [email protected] NL



Table of contents

1. Initial situation, consistency check ...................................................................................... 4

2. Ability to deliver and predicted availability ........................................................................... 5

2.1. Ability to deliver the current products .................................................................................. 5

2.2. Analysis of the current availability/ability to delivery ............................................................. 6

2.3. Predicted product life cycle ................................................................................................. 7

2.3.1. Detailed inventory of Siemens components ................................................................ 8

3. Recommendations for the next steps ................................................................................ 30

3.1. Recommended actions based on the evaluation of the predicted product life cycle .............. 30

3.2. General recommended actions with respect to spare parts ................................................. 31

3.3. Explanation and significance of Siemens repair codes ........................................................ 32

3.4. Legends ........................................................................................................................... 32

3.4.1. Machine categories ................................................................................................. 32

4. Additional services ........................................................................................................... 33

5. General terms and conditions ........................................................................................... 34



1. Initial situation, consistency check

The basis of the consistency check is a comparison of the acquired article number documented in iBase with respect to the central Siemens product database.

As a result of the consistency check, you obtain a "List of unknown article numbers", which are not listed in our database.

You can instruct your service contact person in the region to perform a check and make possible corrections to the data in iBase. Based on a new analysis, the corresponding updated equipment database can be evaluated.

Number of iBase items that have been read in 235 1.092

Of which, after consolidating identical article numbers:

Number of

article numbers

As a percenta

ge

Number of

items

Number of different Siemens article numbers 221 94.0% 1.039

Number of unknown article numbers 14 6.0% 53



2. Ability to deliver and predicted availability

The statements regarding the ability to deliver and the predicted availability with respect to time are based on the information available at the time that the report is generated. However, changes can occur at any time. Further, Siemens does not guarantee the availability to deliver and availability Unforeseeable circumstances can also influence the availability and delivery situation of individual components. Individual article numbers can, for example, be discontinued prematurely or remain available beyond the scheduled life cycle.

This is why we always recommend that an analysis is cyclically performed in order to be able to identify changes as a result of the delivery situation and delivery bottlenecks at an early phase.

2.1. Ability to deliver the current products

The check of the components installed in the plant with regard to their current availability as original product produces the following result:

Product discontinuation :

The following applies for retired products: Support is stopped and the retired product can no longer be delivered or repaired, with the exception of warranty cases.

Level Description Number of

article numbers

As a percentage

Number of items

Items available as original or repairable item 165 70.2% 852

Items no longer available as original component; Items have already been discontinued, have been substituted or replacement types are available

56 23.8% 187

Unknown article number 14 6.0% 53

Total 235 100,0% 1.092



2.2. Analysis of the current availability/ability to delivery

As result of an advanced availability analysis, the following table shows whether successor products exist for products no longer available as original. The following types are differentiated as successor products:

Substitute sind 100%-kompatible Nachfolgeprodukte. Nachfolger sind eventuell nicht 100% kompatibel. Eine technische Klärung bezüglich der

Einsetzbarkeit des Ersatzproduktes in der Anlage/Maschine wird empfohlen.


article numbers

As a percentage

Number of items

Items available as original or repairable item 165 70.2% 852

Items available as substitute 5 2.1% 12

Items available as successor 17 7.2% 49

Items no longer available; Repair or replacement possible to a limited extent

34 14.5% 126


Total 235 100,0% 1.092



2.3. Predicted product life cycle

The predicted life cycle is evaluated according to level, and corresponds to the current status of the information, based on an interpolation, taking into account:

Standard policies regarding the product life cycle

Evaluation of the milestones already reached in the product life cycle

Evaluation of the ability to repair

If one or more substitutes are available for an original product, those statements made concerning the availability horizon for the most recent substitute apply.


article numbers

As a percentage

Number of items

Availability horizon > 5 years 80 34.0% 381

Availability horizon 2 to 5 years 85 36.2% 459

Availability horizon 1 to 2 years 2 0.9% 11

Availability horizon < 1 year 3 1.3% 13

Item has been totally discontinued, or successor only conditionallycompatible

17 7.2% 49

Item has been discontinued and no successor has been defined; repair orreplacement may be possible to a limited extent

34 14.5% 126


Total 235 100,0% 1.092


RC Repair Code

Level Level of product category ( - ) P.M490 Date Estimated date of product discontinuation. The product can no longer be delivered after this date..

Successor available ·····A fully/partially compatible successor exists / UGS Upgrade Service without consulting / with consulting

/ 34

2.3.1. Detailed inventory of Siemens components

The evaluated inventory sorted according to levels is shown in the following table:

Equipment:

Article number Description Level Quantity RC P.M490

Date Successor available

6ES7232-4HB32-0XB0

SIMATIC S7-1200, ANALOG OUTPUT, SM 1232, 2 AO, +/-10V, 14 BIT RESOLUTION, OR 0 - 20 MA/4 - 20 MA, 13 BIT RESOLUTION

17 G - -

6EP1332-1SH71 SIMATIC S7-1200 POWER MODULE PM1207 STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V DC/2.5 A

17 G - -

6ES7212-1HE40-0XB0

SIMATIC S7-1200, CPU 1212C, COMPACT CPU, DC/DC/RLY, ONBOARD I/O: 8 DI 24V DC; 6 DO RELAY 2A; 2 AI 0 - 10V DC, POWER SUPPLY: DC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 75 KB

16 G - -

6GK7243-5DX30-0XE0

COMMUNICATION MODULE CM 1243-5 FOR CONNECTION OF SIMATIC S7-1200 TO PROFIBUS AS DP MASTER MODULE; PG/OP COMMUNICATION; S7-COMMUNICATION

2 G - -

6ED1055-1HB00-0BA0

LOGO! DM8 24R EXPANSION MODULE, PU/I/O: 24V/24V/RELAY, 2TE 4 DI/4 DO, AC/DC/NPN INPUT 1 G - -

6ED1055-4MH00-0BA0

LOGO! TD TEXTDISPLAY, FOR LOGO! .0BA6 AND ..0BA7, 4 LINES, WITH CABLE (2.5M) AND MOUNTING ACCESSORIES, CONFIGURATION WITH LOGO! SOFT COMFORT V6.0

1 G - -

6EP1333-3BA00 SITOP PSU200M 5 A STABILIZED POWER SUPPLY INPUT: 120/230-500 V AC OUTPUT: 24 V DC/5 A 2 G -

6ES7315-2EH14-0AB0

SIMATIC S7-300 CPU 315-2 PN/DP, CENTRAL PROCESSING UNIT WITH 384 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY

3 W - -

6ES7321-1BH02-0AA0

SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED, 16DI, 24 V DC, 1 X 20 PIN 17 G - -

6ES7321-1BL00-0AA0

SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED 32DI, 24 V DC, 1 X 40 PIN 14 G - -

6ES7322-1BH01-0AA0

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 16 DO, 24V DC, 0.5A, 1 X 20 PIN SUM OF OUTPUT CURRENTS 4A/GROUP (8A/MODULE)

10 G - -

6ES7331-7KB02-0AB0

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 2 AI, 9/12/14 BITS RESOLUTION, U/I/THERMOCOUPLE/RESISTANCE, INTERRUPT, DIAGNOSTICS, 1 X 20 PIN, REMOVE/INSERT W. BACKPLANE BUS

2 G - -

6ES7332-5HB01-0AB0

SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 2 AO, U/I; 11/12 BITS RESOL., 20 PIN., REMOVE/INSERT WITH ACTIVE BACKPLANE BUS

1 W - -

6ES7151-8AB01-0AB0

SIMATIC DP, IM151-8 PN/DP CPU FOR ET200S, 192 KB WORKING MEMORY, INT. PROFINET INTERFACE (WITH THREE RJ45 PORTS) AS IO-CONTROLER, W/O BATTERY MMC REQUIRED

1 W - -

6ES7307-1EA01-0AA0

SIMATIC S7-300 STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: DC 24 V DC/5 A 1 G - -


RC Repair Code



/ 34

Equipment:



6ES7322-1BL00-0AA0

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 32DO, 24V DC, 0.5A, 1 X 40 PIN, SUM OF OUTPUT CURRENTS 4A/GROUP (16A/MODULE)

5 G - -

6ES7331-7KF02-0AB0

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 8AI, RESOLUTION 9/12/14 BITS, U/I/THERMOCOUPLE/RESISTANCE INTERRUPT, DIAGNOSTICS; 1X20PIN REMOVE/INSERT W. BACKPLANE BUS

18 G - -

6ES7212-1AE40-0XB0

SIMATIC S7-1200, CPU 1212C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 8 DI 24V DC; 6 DO 24 V DC; 2 AI 0 - 10V DC, POWER SUPPLY: DC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 75 KB

1 G - -

6ES7223-1BL32-0XB0

SIMATIC S7-1200, DIGITAL I/O SM 1223, 16DI / 16DO, 16DI DC 24 V, SINK/SOURCE, 16DO, TRANSISTOR 0.5A 1 G - -

6EP1331-1SH03 LOGO!POWER 24 V/1.3 A STABILIZED POWER SUPPLY INPUT: 100-240 V AC (110-300 V DC) OUTPUT: 24 V/1.3 A DC

1 G - -

6ES7211-1AE31-0XB0


1 G -

6AV6647-0AA11-3AX0

SIMATIC HMI KTP400 BASIC MONO PN, BASIC PANEL, KEY AND TOUCH OPERATION, 4" STN DISPLAY, 4 GRAY SCALES, PROFINET INTERFACE, CONFIGURATION FROM WINCC FLEXIBLE 2008 SP2 COMPACT/ WINCC BASIC V10.5/ STEP7 BASIC V10.5, CONTAINS OPEN SOURCE SW, WHICH IS PROVIDED FREE OF CHARGE FOR DETAILS SEE CD

1 G - -

6ES7214-1AG40-0XB0


1 G - -

6EP1332-4BA00 SIMATIC PM 1507 24 V/3 A STABILIZED POWER SUPPLY FOR SIMATIC S7-1500 INPUT: 120/230 V AC OUTPUT: 24 V/3 A DC

1 G - -

6ES7511-1AK00-0AB0

***SPARE PART*** SIMATIC S7-1500, CPU 1511-1 PN, CENTRAL PROCESSING UNIT WITH WORKING MEMORY 150 KB FOR PROGRAM AND 1 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 60 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY

1 W -

6ES7521-1BL10-0AA0

SIMATIC S7-1500, DIGITAL INPUT MODULE, DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16; INPUT DELAY TYP. 3.2MS; INPUT TYPE 3 (IEC 61131) INCL. FRONT CONNECTOR PUSH-IN

1 G - -

6ES7522-1BL10-0AA0

SIMATIC S7-1500, DIGITAL OUTPUT MODULE, DQ 32 X 24VDC/0.5A; 32 CHANNELS IN GROUPS OF 8, 4 A PER GROUP; INCL. FRONT CONNECTOR PUSH-IN

1 G - -

6ES7365-0BA01-0AA0

SIMATIC S7-300,INTERFACE MODULE IM 365 FOR CONNECTING AN EXPANSION RACK, W/O K-BUS, 2 MODULES + CONNECTING CABLE 1M

2 G - -

6ES7331-1KF02-0AB0

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 8 AI, 13 BIT RESOLUTION, U/I/RESISTANCE/PT100, NI100, NI1000, LG-NI1000, PTC / KTY, 66 MS MODULE UPDATE, 1 X 40 PIN

2 G - -

6ES7332-5HF00-0AB0

SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS

1 W - -


RC Repair Code



/ 34

Equipment:



6ES7350-2AH01-0AE0

SIMATIC S7-300, COUNTER MODULE FM 350-2, 8 CHANNELS, 20 KHZ, 24V ENCODER FOR COUNTING, MEASURING FREQUENCIES, SPEED MEASUREMENT, PERIOD DURATION MEASUREMENT AND PROPORTIONING INCL. CONFIG. PACKAGE AND ELECTRONIC DOCU ON CD

1 W - -

6ES7211-1HE31-0XB0

SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0 - 10V DC, POWER SUPPLY: AC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 30 KB

1 G -

6AV6647-0AD11-3AX0

SIMATIC HMI KTP600 BASIC COLOR PN, BASIC PANEL, KEY AND TOUCH OPERATION, 6" TFT DISPLAY, 256 COLORS, PROFINET INTERFACE, CONFIGURATION FROM WINCC FLEXIBLE 2008 SP2 COMPACT/ WINCC BASIC V10.5/ STEP7 BASIC V10.5, CONTAINS OPEN SOURCE SW WHICH IS PROVIDED FREE OF CHARGE FOR DETAILS SEE CD

1 W - -

6ES7315-2FJ14-0AB0

SIMATIC S7-300 CPU315F-2 PN/DP, CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY

1 W - -

6ES7326-1BK02-0AB0

SIMATIC S7, DIGITAL INPUT SM 326, F-DI 24 X DC 24V, FAILSAFE DIGITAL INPUTS FOR SIMATIC S7 FAILSAFE SYSTEMS WITH DIAGNOST. INTERRUPT, UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1 X 40 PIN

1 W - -

6ES7326-2BF10-0AB0

SIMATIC S7, DIGITAL OUTPUT SM326, F-DO10 X DC24V/2A PP, FAILSAFE DIGITAL OUTPUTS FOR SIMATIC S7F SYSTEMS WITH DIAGNOST. INTERRUPT, LVV, UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1 X 40 PIN

1 W - -

6ES7131-4BF00-0AA0

SIMATIC DP, 1 ELECTR. MODULE FOR ET 200S, 8 DI DC 24V 15 MM WIDTH, 1 PIECE PER PACKAGING UNIT 20 G - -

6ES7132-4BF00-0AA0

SIMATIC DP, 1 ELECTRON. MODULE FOR ET 200S, 8 DO DC24V/0,5A, 15 MM WIDTH, 1 PIECE PER PACKAGING UNIT

9 G - -

6ES7138-4CA01-0AA0

SIMATIC DP, POWER MODULE PM-E FOR ET 200S; 24V DC WITH DIAGNOSIS 11 G - -

6ES7138-4FA04-0AB0

***SPARE PART*** SIMATIC DP, ELECTRON. MODULE F. ET200S, 4/8 F-DI PROFISAFE, 24V DC, 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), ALSO USEABLE IN PROFINET- NETWORK WITH IM151-3 HF

4 G -

6ES7151-3BA23-0AB0

SIMATIC DP, INTERFACE MODULE IM151-3 PN HF FOR ET 200S, TRANSMISS. RATE UP TO 100MBIT/S MAX. OF 63 PERIPHERAL MODULES UP TO 2M WIDTH CONNECTABLE; 2 X BUS INTERFACING VIA RJ45 INCL. TERMINATING MODULE

4 W - -

6ES7134-4GB11-0AB0

SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 2 AI STAND. I-4DMU 15 MM WIDE, +/-20MA; 13 BIT + SIGN,4 .. 20MA; 12 BIT FOR 4-WIRE TRANSDUCER CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

3 G - -

6AV2124-1MC01-0AX0

SIMATIC HMI KP1200 COMFORT, COMFORT PANEL, KEY OPERATION, 12" WIDESCREEN-TFT-DISPLAY, 16 MIL. COLORS, PROFINET INTERFACE, MPI/PROFIBUS DP INTERFACE, 12 MB USER MEMORY, WINDOWS CE 6.0, CONFIGURABLE FROM WINCC COMFORT V11

1 W - -


RC Repair Code



/ 34

Equipment:



6GK7343-1CX10-0XE0

SIMATIC NET, CP 343-1 LEAN COMMUNICATION PROCESSOR FOR CONNECTING SIMATIC S7-300 TO IND. ETHERNET VIA TCP/IP AND UDP, MULTICAST, SEND/RECEIVE W/ AND W/O RFC1006, FETCH/ WRITE, S7-COMMUNICATION(SERVER) PROFINET IO-DEVICE INTEGRATED 2-PORT SWITCH ERTEC 200, BG EXCHANGE W/O PG, SNMP DIAGNOSTICS, INITIALIZATION VIA LAN, 2 X RJ45 CONNECTION FOR LAN WITH 10/100 MBIT/S

1 W 12/31/2030 -

6ES7314-6CG03-0AB0

*** SPARE PART*** SIMATIC S7-300, CPU 314C-2DP COMPACT CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), INTEGRATED DP INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 96 KBYTE WORKING MEMORY, FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

1 W -

6ES7323-1BL00-0AA0

SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1X40 PIN

1 G - -

6GK7343-1EX30-0XE0

COMMUNIKATIONSPROCESSOR CP343-1 FOR CONNECTING SIMATIC S7-300 TO IND. ETHERNET VIA ISO AND TCP/IP, PROFINET IO-CONTROLLER OR PROFINET IO-DEVICE, INTEGR. 2-PORT SWITCH ERTEC200 S7-COMM., FETCH/WRITE, SEND/RCV W. AND W/O RFC1006,MULTICAST DHCP, NTC-CPU SYNC, DIAGNOSTIC, INITIALIZATION VIA LAN, 2 X RJ45 CONNECT. FOR LAN WITH 10/100 MBIT/S

1 W 12/31/2030 -

6ES7132-4BD01-0AA0

SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DO STANDARD DC 24V/0.5A, 15 MM WIDTH, 5 PIECES PER PACKAGING UNIT

6 G 10/1/2010

6EP1333-2BA01 SITOP SMART 120 W STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V DC/5 A PFC VERSION 2 G -

6ES7317-2AJ10-0AB0

*** SPARE PART*** SIMATIC S7-300, CPU 317-2DP, CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE DP-MASTER/SLAVE, MICRO MEMORY CARD NECESSARY

4 W -

6ES7340-1CH00-0AE0

SIMATIC S7-300, CP 340 COMMUNICATION PROCESSOR WITH RS422/485 INTERFACE INCL. CONFIG. PACKAGE ON CD

2 W 10/1/2007

6ES7153-1AA03-0XB0

SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES 5 W - -

6GK7443-1GX20-0XE0

COMMUNICATIONS PROCESSOR CP 443-1 ADVANCED FOR CONNECTING SIMATIC S7-400CPU TO INDUSTRIAL ETHERNET: PROFINET IO-CONTROLLER WITH RT AND IRT, MRP, PROFINET CBA, TCP/IP,ISO,UDP,S7-COM,S5-COMP. COM.(SEND/RECEIVE).FETCH/WRITE WITH AND W/O RFC1006,MULTICAST, DIAGNOSTIC EXPANSIONS,SNMP, DHCP, FTP CLIENT/SERVER,E-MAIL, DATA STORAGE ON C-PLUG, PROFINET-SS 4XRJ45(10/100 MBIT) SWITCHED, GIGABIT-SS 1XRJ45 (10/100/1000 MBIT)

1 U -

6ES7315-2AF01-0AB0

SIMATIC S7-300, CPU 315-DP CPU WITH INTEGRATED 24V DC PS, 48 KBYTE WORKING MEMORY 2ND INTERFACE DP-MASTER/SLAVE

1 W 10/1/2008

6ES7332-5HD01-0AB0

SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 4 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 20 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS

5 W - -


RC Repair Code



/ 34

Equipment:



6ES7951-0KE00-0AA0

SIMATIC S7, MEMORY CARD FOR S7-300, SHORT VERSION, 5V FLASH EPROM, 32 KBYTES 1 N - -

6ES7322-1BH10-0AA0

SIMATIC S7-300, DIGITAL OUTPUT SM 322 HIGH SPEED, GALVANICALLY ISOLATED, 16 DO, 24V DC, 0.5A, 1 X 20 PIN

8 W - -

6ES7972-0AA01-0XA0

SIMATIC DP, RS485 REPEATER FOR THE CONNECTION OF PROFIBUS/MPI BUS SYSTEMS WITH MAX. 31 NODES; MAX. 12 MBIT/S, DEGREE OF PRO- TECTION IP20

2 W 10/1/2012

6GK1500-0AA10 12M BUS TERMINAL FOR PROFIBUS, TRANSMISSION RATE 9.6 KBIT/S TO 12 MBIT/S, CONNECTING CABLE 1.5 M 2 G - -

6ES7400-1JA01-0AA0

SIMATIC S7-400, UR2 RACK, CENTRALIZED AND DISTRIBUTED WITH 9 SLOTS 2 REDUNDANT PS PLUGGABLE

1 W - -

6ES7407-0DA01-0AA0

SIMATIC S7-400, PS 407 POWER SUPPLY, 4A, 120/230V AC, 5V/4A DC 1 G 9/15/2016

6ES7416-2XK02-0AB0

SIMATIC S7-400, CPU 416-2 1.6 MB WORKING MEMORY (0.8 MB CODE, 0.8 MB DATA) 1. INTERFACE MPI/DP 12 MBIT/S 2. INTERFACE DP

1 W 1/20/2015

6ES7952-0KH00-0AA0

SIMATIC S7, MEMORY CARD FOR S7-400, LONG VERSION, 5V FLASH-EPROM, 256 KBYTES 1 N - -

6ES7321-1BH50-0AA0

SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED 16DI, 24 V DC, SOURCE INPUT, 1 X 20 PIN 8 G - -

6ES7390-1AE80-0AA0

SIMATIC S7-300, RAIL L=480MM 4 - -

6AV6642-0BC01-1AX1

AS OF 2015-01-01 THE PRODUCT IS BLOCKED FOR DELIVERY AND IS NO LONGER AVAILABLE AS A NEW PART. INFORMATION ABOUT SUCCESSOR SEE SIMATIC UPDATE ID: 62977695 FOR FURTHER QUESTIONS PLEASE APPROACH YOUR SIEMENS CONTACT PERSON. SIMATIC TP177B 6" DP BLUE MODE STN-DISPLAY MPI-/PROFIBUS-DP PROTOCOL RS485-/RS422-/USB INTERFACE PRINTER - INTERFACE SLOT FOR MMCARD CONFIGURABLE WITH WINCC FLEXIBLE 2005

1 W - -

6EW1890-2AC MAIN POWER SUPPLY UNIT (MPS) 393769 FOR 6SC36/37, 6SE35/36 AND 6SE51/52 CONVERTERS 5 R0 - -

6GK1105-2AE00

SIMATIC NET, OSM TP22 OPTICAL SWITCH MODULE W. 2 FOC CABLE PORTS 100MBIT/S, 2 RJ45 PORTS, 10/100MBIT/S AND 4 DIGITAL INPUTS, RED. 24V DC SUPPLY, SIGNALLING CONTACT, INTEGRATED REDUNDANCY MANAGER W. NETWORK MANAGEMENT

11 U - -

6GK5414-3FC00-2AA2

SCALANCE X414-3E, MODULAR IE SWITCH, 2 X 10/100/1000MBIT/S AND 12 X 10/100MBIT/S RJ45 PORTS, 1 X GIGAGBIT AND 2 X 100 MBIT MEDIA MODULE SLOTS, EXTENDER INTERFACE, INTEGRATED REDUNDANCY MANAGER, OFFICE FEATURES (RSTP, VLAN,..) NETWORK MANAGEMENT, C-PLUG INCLUDED IN THE SCOPE OF SUPPLY

10 U - -


RC Repair Code



/ 34

Equipment:



6GK5408-2FD00-2AA2

SCALANCE X408-2, MODULAR IE SWITCH, 4 X 10/100/1000MBIT/S AND 4 X 10/100MBIT/S RJ45 PORTS, 2 X GIGAGBIT/FAST ETHERNET MEDIA MODULE SLOTS, INTEGRATED REDUNDANCE MANAGER, OFFICE FEATURES (RSTP, VLAN,..) NETWORK MANAGEMENT, C-PLUG IN THE SCOPE OF SUPPLY

16 W - -

6GK1105-2AB10

SIMATIC NET, OSM TP62 OPTICAL SWITCH MODULE W. 2 FOC CABLE PORTS 100MBIT/S, 6 RJ45 PORTS, 10/100MBIT/S AND 8 DIGITAL INPUTS, REDUN. 24V DC SUPPLY, SIGNALLING CONTACT, INTEGRATED REDUNDANCY MANAGER W. NETWORK MANAGEMENT

9 U - -

6GK5212-2BB00-2AA3

SCALANCE X212-2, MANAGED IE SWITCH, 12 X 10/100MBIT/S RJ45 PORTS, 2 X 100MBIT/S MULTIMODE BFOC, LED-DIAGNOSTICS, FAULT SIGNAL. CONTACT WITH SET BUTTON, REDUNDANT POWER SUPPLY PROFINET-IO DEVICE, NETWORK- MANAGEMENT, INTEGRATED REDUNDANCY MANAGER, INCL. ELECTRONIC MANUAL ON CD, C-PLUG OPTIONAL

14 W - -

6GK5204-2BB10-2AA3

SCALANCE X204-2, MANAGED IE SWITCH, 4 X 10/100MBIT/S RJ45 PORTS, 2 X 100MBIT/S MULTIMODE BFOC, LED DIAGNOSTICS, ERROR SIGNAL CONTACT WITH SET BUTTON, REDUNDANT POWER SUPPLY, PROFINET-IO DEVICE, NETWORK MANAGEMENT, INTEGRATED REDUNDANCY MANAGER, INCL. ELECTRONIC MANUAL ON CD, C-PLUG OPTIONAL

12 W - -

6GK1105-2AD10

SIMATIC NET, OSM ITP53 OPTICAL SWITCH MOD. W. 3 FOC PORTS 100 MBIT/S, 5 ITP PORTS 10/100 MBIT/S AND 8 DIGITAL INPUTS; REDUNDANT 24V DC SUPPLY, SIGNAL CONTACT, INTEGRATED REDUNDANCY MANAGER WITH NETWORK MANAGEMENT AMBIENT TEMPERATURE MAX. +55 DEGR. C.

7 U - -

6GK1105-2AA10

SIMATIC NET, OSM ITP62 OPTICAL SWITCH MODULE W. 2 FOC PORTS 100 MBIT/S, 6 ITP-PORTS 10/100 MBIT/S AND 8 DIGITAL INPUTS; REDUNDANT 24V DC SUPPLY, SIGNAL CONTACT, INTEGRATED REDUNDANCY MANAGER WITH NETWORK MANAGEMENT AMBIENT TEMPERATURE MAX. +55 DEGR. C.

6 U - -

6ES7315-2AG10-0AB0

*** SPARE PART*** SIMATIC S7-300, CPU 315-2DP CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 128 KBYTE WORKING MEMORY 2. INTERFACE DP-MASTER/SLAVE MICRO MEMORY CARD NECESSARY

5 W -

6ES7322-1HH01-0AA0

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED 16DO, RELAY CONTACTS, 1 X 20 PIN 12 G - -

6GK7342-5DA02-0XE0

COMMUNICATIONSPROCESSOR CP342-5 FOR CONNECTING SIMATIC S7-300 TO PROFIBUS, DP, S5-COMPATIBLE PG/OP AND S7 COMMUNICATION

4 W -

6EP1333-2BA20 SITOP PSU100S 24 V/5 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/5 A DC 1 G - -

6DS8111-8AA TELEPERM M CABLE CONNECTOR SPECIAL CONFIGURATION AS REQUIRED BY CUSTOMER 8 - -

Recommendation by Siemens


RC Repair Code



/ 34

No measures are required, since availability is guaranteed for the foreseeable future.


RC Repair Code



/ 34

Equipment:



6SE7031-7HG84-1JA1

SIMOVERT MASTERDRIVES POWER SUPPLY UNIT PSU1 FOR UNITS OF DESIGN E TO H 3-PH. 380-460 AC. 660-690 V, 50/60 HZ AND 510-620V DC, 890-930V DC

2 N 9/30/2020 -

6SE7090-0XX84-0AA1

SIMOVERT MASTERDRIVES CLOSED-LOOP AND OPEN-LOOP CONTROL MODULE CU1 SOFTWARE VERSION 1.1 2 W 10/1/2020 -

6SE7090-0XX84-0AB0

CLOSED-LOOP AND OPEN-LOOP CONTROL MODULE VECTOR CONTROL SIMOVERT MASTERDRIVES FIRMWARE VERSION: V3.4

4 W 9/30/2020 -

6SE7090-0XX84-2FA0

SIMOVERT MASTERDRIVES OPER./PARAMETER ASSIGNMENT UNIT PMU F. UNITS OF DESIGN A AND B 6 N 10/1/2020 -

6DS1000-8AA ***SPARE PART*** POWER SUPPLY MODULE 24 V/5 V, 18 A 11 R0 12/31/2018 -

6DS1202-8AB N-V.24 INTERFACE MODULE FOR 20-M LOCAL BUS WITH V.24 OR TTY INTERFACE 2 R0 12/31/2018 -

6DS1211-8AA ***SPARE PART*** POWER SUPPLY SECTION OF UI BUS CONVERTER MODULE 6DS4400-8AB 17 R0 12/31/2018 -

6DS1212-8AB ***SPARE PART*** BUS INTERFACE OF UI BUS CONVERTER MODULE 6DS4400-8AB 11 R0 12/31/2018 -

6DS1213-8AA ***SPARE PART*** INDUCTIVE COUPLER OF UI BUS CONVERTER MODULE 6DS4400-8AB 15 R0 12/31/2018 -

6DS1312-8AB INTERFACE MODULE FOR ONE I/O BUS 9 R0 12/31/2018 -

6DS1602-8AA BINARY INPUT MODULE WITH 32 INPUTS, FLOATING 20 R0 12/31/2018

6DS1602-8BA ***SPARE PART*** BINARY INPUT MODULE WITH 32 INPUTS, FLOATING, WITH INTERRUPT CONTROL 2 R0 12/31/2018 -

6DS1603-8AB DIGITAL OUTPUT MODULE WITH 32 OUTPUTS, 100 MA EACH, NON-FLOATING 2 R0 12/31/2018

6DS1605-8BA ***SPARE PART*** BINARY OUTPUT MODULE WITH 16 RELAYS, FLOATING 4 R0 12/31/2018 -

6DS1700-8AA

ANALOG INPUT MODULE WITH 8 CHANNELS FOR THERMO- COUPLES AND/OR PT 100 RESISTANCE THERMOMETERS AND 4 ANALOG OUTPUTS, WITHOUT MEASURING RANGE PROM 6DS5500, CAN BE EXTENDED BY 6DS1703-8AB

9 R0 12/31/2018

6DS1700-8BA ***SPARE PART*** ANALOG INPUT MODULE WITH 8 CHANNELS AND POWER SUPPLY FOR TRANSMITTERS, FLOATING

4 R0 12/31/2018

6DS1702-8AA ANALOG OUTPUT MODULE WITH 4 OUTPUTS, FLOATING 8 R0 12/31/2018 -

6DS1713-8AB ANALOG INPUT MODULE WITH 4 INPUT CHANNELS FOR THERMOCOUPLES AND/OR PT 100 RESISTANCE THERMOMETERS, WITHOUT MEASURING RANGE PROM

1 R0 12/31/2018


RC Repair Code



/ 34

Equipment:



6DS3305-8AA

***SPARE PART*** PROCESS OPERATION KEYBOARD FOR PROCESS OPERATIONS, TO ACKNOWLEDGE ALARMS, TO ENTER DATA AND TO SELECT AREA, GROUP AND LOOP DISPLAYS

1 R0 12/31/2018

6ES5306-7LA11 *** SPARE PART*** SIMATIC S5 IM 306 INTERFACE MODULE F. S5-115U PLC F.CENTRALIZED CONNECTION OF EXPANSION UNITS TO A CENTRAL OR AN EXP. UNIT

16 W 10/1/2020 -

6ES5375-0LD21 *** SPARE PART*** SIMATIC S5 375 MEMORY SUBMODULE RAM, 16 KBYTES 1 W 10/1/2020 -

6ES5377-0AA11 *** SPARE PART*** SIMATIC S5 377 MEMORY SUBMODULE SHORT TYPE RAM, 16 KBYTES 2 G 10/1/2020 -

6ES5430-7LA12 *** SPARE PART*** SIMATIC S5 430 DIGITAL INPUT MODULE FLOATING, FOR S5-115U/F 32 INPUTS, 24 V DC 12 W 10/1/2020 -

6ES5700-2LA12 *** SPARE PART*** SIMATIC S5 CR 700-2 MOUNTING RACK FOR S5-115U CENTRAL CONTROLLER W. 7 FREE MODULE SLOTS F. DISTRIBUTED CONFIGURATION

1 G 10/1/2020 -

6ES5701-1LA12 *** SPARE PART*** SIMATIC S5 ER 701-1 MOUNTING RACK F. S5-115U/F EXPANSION UNITS W. 9 FREE MODULE SLOTS F. CENTRALIZED CONFIGURATION

6 G 10/1/2020 -

6ES5981-0HA11 *** SPARE PART*** SIMATIC S5 FAN SUBASSEMBLY F. LONG MOUNTING RACKS F. 115/230V AC 4 G 10/1/2020 -

6SE7031-2HF84-1BG0

INVERTER INTERFACE MODULE IVI 1 N 9/30/2020 -

6DS1110-8AA AS 230/AS 231 CPU, ARITHMETIC UNIT 3 R0 12/31/2018 -

6DS1111-8AC AS 230/AS 231 CPU, VERSION E, CONTROL UNIT 2 R0 12/31/2018 -

6DS1112-8AA AS 230/AS 231 CPU, ADDRESS CONTROL MODULE 2 R0 12/31/2018 -

6DS1200-8AC N8 INTERFACE MODULE FOR 20-M LOCAL BUS, 8 BIT 2 R0 12/31/2018

6DS1308-8AB ***SPARE PART*** INTERFACE MODULE FOR COLOR MONITOR 2 R0 12/31/2018 -

6DS1321-8AA INTERFACE MODULE FOR SIMATIC S5 EXPANSION UNITS 1 R0 12/31/2018 -

6DS1326-8BB ***SPARE PART*** INTERFACE MODULE FOR MINI FLOPPY DISK UNIT 1 R0 12/31/2018 -

6DS1403-8AA ***SPARE PART*** CLOSED-LOOP CONTROL MODULE WITH TWO PI CONTROLLERS K 20 R0 12/31/2018

6DS1403-8BA ***SPARE PART*** CLOSED-LOOP CONTROL MODULE WITH 2 PI CLOSED-LOOP CONTROLLERS K, WITH 2 CHANNELS

1 R0 12/31/2018


RC Repair Code



/ 34


RC Repair Code



/ 34

Equipment:



6DS1605-8AA BINARY OUTPUT MODULE WITH 16 RELAYS, FLOATING 13 R0 12/31/2018

6DS1837-8CA RAM MODULE, 3 MBYTE, WITHOUT BACK-UP BATTERY 1 R0 12/31/2018

6DS1844-8DA AS 235 RAM MODULE REAL-TIME CLOCK AND 4000-KBYTE USER RAM WITHOUT BUFFER BATTERY 1 R0 12/31/2018

7MH4553-1AA41

SIWAREX M WEIGHING AND BATCHING SYSTEM WITH VERIFICATION CAPABILITY, USABLE FOR SIMATIC S7-300 AND ET 200M, INCL.BUS CONNECTOR EC-CONFOMITY CERTIFICATE 6000D, ATTENTION: FOR LEGAL FOR TRADE APPLICATIONS PLEASE FOLLOW THE LOCAL LAWS APPLYING IN THE COUNTRY OF LEGAL VERIFICATION! ATTENTION: SPAREPART ONLY! SUCCESSOR IS SIWAREX FTA 7MH4900-2AA01 (ATTENTION! PROGRAM MUST BE ADAPTED!)

1 U 12/31/2019

6AV6545-0DA10-0AX0

*** SPARE PART*** SIMATIC MULTIPANEL MP370 12" COLOR TFT DISPLAY, TOUCH WINDOWS CE 3.0 CONFIGURABLE WITH PROTOOL FROM VERSION V5.2+SP3

9 U 3/1/2018

6ES5376-1AA31 *** SPARE PART*** SIMATIC S5, 376 MEMORY SUBMOD. CMOS EPROM, 64 KBYTES 3 G 10/1/2020 -

6ES5420-7LA11 *** SPARE PART*** SIMATIC S5 420 DIGITAL INPUT MODULE NON-FLOATING, F. S5-115U PLC 32 INPUTS, 24 V DC

23 W 10/1/2020 -

6ES5318-8MB13 *** SPARE PART*** SIMATIC S5, IM318-B INTERFACE SLAVE INTERFACE, FOR ET200U TO PROFIBUS-DP 1 W 10/1/2020 -

6ES5374-2KH21 *** SPARE PART*** SIMATIC S5, MEMORY CARD LONG TYPE 5V ONLY FLASH-EPROM, 256 KBYTES 1 G 10/1/2020 -

6ES5700-0LB11 *** SPARE PART*** SIMATIC S5 CR 700-0LB MOUNTING RACK F. S5-115U CENTRAL CONTROLLER W. 6 FREE MODULE SLOTS F. CENTR. AND DISTRIB. CONFIG.

1 G 10/1/2020 -

6ES5266-8MA11 *** SPARE PART*** SIMATIC S5 IP 266 POSITIONING MODULE FOR MINI PROGRAM CONTROLLER S5-90U/-95U/-100U PLC F. CLOSED-LOOP POSITION CONTROL

2 W 10/1/2020 -

6ES5431-8MA11 *** SPARE PART*** SIMATIC S5 431 DIGITAL INPUT MODULE FLOATING FOR S5-90U/-95U/-100U, ET 100U, ET 200U, 8 INPUTS 24V DC

10 G 10/1/2020 -

6ES5452-8MR11 *** SPARE PART*** SIMATIC S5 452 DIGITAL 0UTPUT MODULE FLOATING, FOR S5-90U/-95U/-100U ET 100U, ET 200U, 4 RELAY CONTACT OUTPUTS, 30V DC 230V AC

13 G 10/1/2020 -

6ES5700-8MA11 *** SPARE PART*** SIMATIC S5 BUS UNIT F. S5-100U/ET 100U PLC W.TERM.BLOCK F. SCREW TERMINALS 43 G 10/1/2020 -

6ES5375-0LC11 *** SPARE PART*** SIMATIC S5 375 MEMORY SUBMODULE EEPROM, 2 KBYTES 384 PROGRAM ELEMENTS

2 G 10/1/2020 -

6ES5470-8MC12 *** SPARE PART*** SIMATIC S5 470 ANALOG OUTPUT MODULE FLOATING F. S5-90U/-95U/-100U, ET 100U, ET200, 2 OUTPUTS +4 TO 20 MA

4 W 10/1/2020 -


RC Repair Code



/ 34

Equipment:



6ES5951-7LD21 *** SPARE PART*** SIMATIC S5 951 POWER SUPPLY UNIT F. S5-115U/H W/O BACKUP-BATTERY 120/230V AC; 5V DC, 7/15A

4 W 10/1/2020 -

6ES5944-7UB11 *** SPARE PART*** SIMATIC S5, CPU 944 FOR S5-115U PLC WITH 1 INTERFACE 1 W 10/1/2020 -

6ES5465-4UA13 *** SPARE PART*** SIMATIC S5 465 ANALOG INPUT MODULE NON-FLOATING, COMPACT VERSION U 16 INPUTS MEASURING RANGE MODULE REQUIRED

3 W 10/1/2020 -

6ES5464-8ME11 *** SPARE PART*** SIMATIC S5 464 ANALOG INPUT MODULE FLOATING, FOR S5-90U/-95U/-100U ET 100U, ET 200U 4 INPUTS, +4 TO 20MA

2 W 10/1/2020 -

6ES5422-8MA11 *** SPARE PART*** SIMATIC S5 422 DIGITAL INPUT MODULE NON-FLOATING FOR S5-90U, -95U, -100U, ET 100U/200U, 16 INPUTS 24V DC

5 G 10/1/2020 -

6ES5095-8MA05 *** SPARE PART*** SIMATIC S5, S5-95U COMPACT UNIT 2 W 10/1/2020 -

6ES5440-8MA22 *** SPARE PART*** SIMATIC S5 440 DIGITAL OUTPUT MODULE NON-FLOATING F. S5-90U/-95U/-100U, ET 100U, ET 200U,4 OUTPUTS 24V DC; 2A

2 G 10/1/2020 -

6ES5942-7UB11 *** SPARE PART*** SIMATIC S5, CPU 942 F. S5-115U PLC RAM 10 KBYTES 1 W 10/1/2020 -

6ES5951-7LB21 *** SPARE PART*** SIMATIC S5, 951 POWER SUPPLY UNIT FOR S5-115U/H, W/O BACK-UP BATTERY; 120/230V AC; 5V DC, 3A

1 W 10/1/2020 -

6ES5451-8MA11 *** SPARE PART*** SIMATIC S5 451 DIGITAL OUTPUT MODULE FLOATING FOR S5-90U/-95U/-100U, ET 100U, ET 200U 8 OUTPUTS 24V DC, 1A

5 G 10/1/2020 -

6ES5464-8MC11 *** SPARE PART*** SIMATIC S5 464 ANALOG INPUT MODULE FLOATING, FOR S5-90U/-95U/-100U ET 100U, ET 200U 4 INPUTS +- 10V

2 W 10/1/2020 -

6ES5100-8MA02 *** SPARE PART*** SIMATIC S5, CPU 100 CPU FOR S5-100U PC W.POWER SUPPLY UNIT 24V/9V DC W/O INSTRUCTION MANUAL

1 W 10/1/2020 -

6ES5102-8MA02 *** SPARE PART*** SIMATIC S5, CPU 102 CPU FOR S5-100U PC W.POWER SUPPLY UNIT 24V/9V DC W/O INSTRUCTION MANUAL

3 W 10/1/2020 -

6ES5375-1LA15 *** SPARE PART*** SIMATIC S5, 375 MEMORY SUBMOD. CMOS EPROM, 8 KBYTES 4 G 10/1/2020 -

6ES5103-8MA03 *** SPARE PART*** SIMATIC S5, CPU 103 F.S5-100U PC 1 W 10/1/2020 -

6ES5943-7UB21 *** SPARE PART*** SIMATIC S5, CPU 943 FOR S5-115U PLC WITH 2 INTERFACES 1 W 10/1/2020 -

6ES5760-0AA11 *** SPARE PART*** SIMATIC S5 TERMINATING RESISTOR CONNECTOR F.IM310 EU-INTERFACE MODULE 1 G 10/1/2020 -

6ES5760-0AB11 *** SPARE PART*** SIMATIC S5,TERMIN.RESIST.CONN. FOR IM312 CC INTERFACE MODULE OR IM301 EU INTERFACE MODULE

2 G 10/1/2020 -


RC Repair Code



/ 34

Equipment:



6ES5454-7LB11 *** SPARE PART*** SIMATIC S5 454 DIGITAL OUTPUT MODULE FLOATING, F. S5-115U/F PLC 8 OUTPUTS, 24V DC; 2A

8 W 10/1/2020 -

6ES5458-7LA12 *** SPARE PART*** SIMATIC S5, 458 DIGITAL OUTPUT FLOATING, F. S5-115U/F PLC 16 SOLID STATE RELAY OUTPUTS, 30V DC; 0.5 A

11 W 10/1/2020 -

6ES5482-7LF11 *** SPARE PART*** SIMATIC S5 482 DIGITAL INPUT/OUTPUT MODULE FLOATING, FOR S5-115F PLC 16 INP./16 OUTP. 24 V DC; 0.5 A POSITIVE SWITCHING

8 W 10/1/2020 -

6ES5705-0AF00 *** SPARE PART*** SIMATIC S5, 705 CABLE F. CENTRALIZED CONFIGURATION W. IM 306, EU ABOVE CC 0.5M

4 N 10/1/2020 -

6ES5951-7ND41 *** SPARE PART*** SIMATIC S5 951 POWER SUPPLY UNIT F. S5-115U/H/F PLC (REN.) W/O BACKUP BATTERY, FLOATING 24V DC; 5V DC, 7A/15A

2 R0 10/1/2020 -

6EW1000-7AA SIMATIC S5, BACKUP BATTERY LITHIUM SNR. 11111, SIZE C, 3.6V/5.2AH FOR S5-110S, -115U, -135U, -150U ATTENTION! HAZARDOUS GOODS

2 N 10/1/2020 -

C74103A1900A351

DIODE MODULE 2 10/1/2018 -

6DS9203-8DA CONNECTOR BOARD AF "REMOTE BUS" WITH MOUNTING PLATE 8 N 12/31/2018

6ES5461-8MA11 *** SPARE PART*** SIMATIC S5 461 COMPARATOR MODULE FLOATING, FOR S5-90U/-95U/-100U ET 100U/ET 200U PLC 2 INPUTS O.5 TO 10V;0.5 TO 20MA

1 N 10/1/2020 -

6ES5530-7LA12 *** SPARE PART*** SIMATIC S5 CP 530 COMMUNICATIONS PROCESSOR FOR SINEC L1 FOR S5-115U PLC

2 R0 10/1/2020 -

6ES5943-7UB11 *** SPARE PART*** SIMATIC S5, CPU 943 FOR S5-115U PLC, RAM 48 KBYTES W. 1 PROGRAMMER PORT 3 W 10/1/2020 -

6ES5700-0LA12 *** SPARE PART*** SIMATIC S5 CR 700-0LA MOUNTING RACK F. S5-115U CENTRAL CONTROLLER W. 4 FREE MODULE SLOTS F. CENTRALIZED CONFIGURATION

1 N 10/1/2020 -

6DS4426-8AA REMOTE BUS CONNECTION SUBRACK WITH SLOTS FOR 2 BUS CONVERTERS FOR CONNECTION TO DC 24 V 4 N 12/31/2018 -

6DS1206-8AA N-S5 INTERFACE MODULE FOR 20-M LOCAL BUS, 8 BIT 15 R0 12/31/2018 -

6DS1702-8RR ***SPARE PART*** ANALOG OUTPUT MODULE WITH 4 OUPTPUTS, FLOATING 12 R0 12/31/2018 -


Measures for increasing availability during planning should be considered in the medium-term. Recommendations:

1. Based on the plant life cycle, check the inventories and any required restocking,


RC Repair Code



/ 34

- in the own warehouse

- thanks to material stocking by Siemens.

2. Check the measures to increase lifetime.

3. Modernization of subplants and storage of modules so that these are available as spare parts forexisting devices.


RC Repair Code



/ 34

Equipment:



6GK7343-1EX11-0XE0

COMMUNICATIONSPROCESSOR CP343-1 FOR CONNECTION OF SIMATIC S7-300 WITH IND. ETHERNET USING ISO, TCP/IP AND UDP, S7 COMM., FETCH/WRITE, SEND/RECEIVE, WITH AND W/O RFC 1006, DIAGN. EXPANSIONS, MULTICAST, PBK, INITIALIZATION THROUGH LAN, 10/100 MBIT

10 U 5/22/2017

6AV6545-0BA15-2AX0

*** SPARE PART*** SIMATIC TOUCH PANEL TP170A BLUE MODE STN-DISPLAY MPI/PROFIBUS-DP INTERFACE CONFIGURABLE W. PROTOOL/LITE FROM VERSION V5.2

1 U 4/1/2017


Measures to increase the security of supply should be drawn up immediately.

Recommendations:





3. Modernization of subplants and storage of modules so that these are available as spare partsforexisting devices.


RC Repair Code



/ 34

Equipment:



6AV3607-1JC20-0AX1

*** SPARE PART*** OPERATOR PANEL OP7/DP LC DISPLAY, BACKLIT LED 4 LINES, 20 CHARACTERS/LINE, SIMATIC S7, M7, PROFIBUS-DP 1.5 MBAUD UL/CSA-LISTED

1 R0 10/1/2016

6SE7032-6EG84-1GF0

MASTERDRIVES INVERTER WIRING BOARD SMU1 6 N 9/30/2016 -

6SE7032-6EG84-1GG0

MASTERDRIVES INVERTER WIRING BOARD SML1 6 N 9/30/2016 -


Measures to increase the security of supply should be drawn up immediately.

Recommendations:





3. Modernization of subplants and storage of modules so that these are available as spare parts forexisting devices.


RC Repair Code



/ 34

Equipment:



6ED1052-1FB00-0BA3

LOGO! 230RC,LOGIC MODULE,DISPL. PU/I/O: 230V/230V/RELAY, 8 DI/4 DO; MEMORY 56 BLOCKS, EXPANDABLE WITH EXTRA MODULES

4 G 10/1/2008

6ES7131-4BD00-0AA0

SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DI STANDARD 24V DC, 15 MM WIDTH, 5 PIECES PER PACKAGING UNIT

6 G 10/1/2010

6ES7151-1AA04-0AB0

*** SPARE PART*** SIMATIC DP, INTERFACE MODULE IM151-1 STANDARD FOR ET200S; INCL. TERMINATING MODULE DATA VOLUME 244BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 PERIPHERIEMODULES PROFIBUS DP V0 AND V1 UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D

1 W 10/1/2013

6AV6642-0AA11-0AX0

*** SPARE PART*** SIMATIC TOUCH PANEL TP 177A 5,7" BLUE MODE STN-DISPLAY, MPI/PROFIBUS-DP INTERFACE, CONFIGURABLE WINCC FLEXIBLE 2004 COMPACT HSP UPWARDS; CONTAINS OPEN-SOURCE-SW, WHICH IS PROVIDED FREE OF CHARGE. FOR DETAILS SEE ENCLOSED CD

1 W 6/30/2015

6ES7352-5AH00-0AE0

*** SPARE PART*** SIMATIC S7-300, FM352-5 HIGH SPEED BOOLEAN PROCESSOR, FOR HIGH-SPEED LOGIC OPERATION 12 DI, 8 DO, 1 ENCODER INTERF. FOR RS422 INCR./SSI ENCODER

4 W 10/1/2013

6ES7331-7KF01-0AB0

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, U/I/THERMOCOUPLE/RESISTANCE INTERRUPT, DIAGNOSTICS; RESOLUTION 9/12/14 BITS, 8AI, REMOVE/INSERT W. BACKPLANE BUS 20 PIN

1 2/1/2005

6SE7033-2EG84-1JF0

INVERTER INTERFACE CONTROL MODULE IGD3 FOR UNITS 3-PH 380-460V AC, 50/60HZ AND 510-620V DC, 210/260/315A

2 R0 11/5/2013

6ES5451-7LA11 SIMATIC S5 451 DIGITAL OUTPUT MODULE FLOATING, F. S5-115U/F PLC 32 OUTPUTS, 24V DC; 0.5A 4 W 10/1/2006

6ES5535-3MA12 SIMATIC S5, CP 535 COMM. PROC. F. SINEC H1, WITH 15V MODULE FOR SINEC H1 WITH 15V VOLTAGE MODULE AVAILABLE AS EXCHANGE ONLY!

1 10/1/2002

6ES5943-7UA11 SIMATIC S5, CPU 943 F. S5-115U PLC RAM 16 KBYTES W. 1 PROGRAMMER PORT 1 10/1/2002

6ES5951-7LD12 SIMATIC S5, 951 POWER SUP. UNIT F. S5-115U/H PLC W/O BACKUP BATTERY 115/230V AC; 5V DC, 7/15A 1 10/1/2005

6EW1890-3AA RACK POWER SUPPLY 5 2/1/1995

6GK5204-2BB00-2AA3

SCALANCE X204-2, MANAGED IE SWITCH, 4 X 10/100MBIT/S RJ45 PORTS, 2 X 100 MBIT/S MULTIMODE BFOC, LED DIAGNOSTICS, FAULT SIGNAL. CONTACT WITH SET BUTTON, REDUNDANT VOLTAGE SUPPLY, PROFINET IO DEVICE, NETWORK MANAGEMENT, OPER.IN RED. RING, W. ELECTRONIC MANUALS ON CD, OPTIONAL C-PLUG

1 W 9/1/2012

6ES7153-2BA00-0XB0

SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE

5 W 10/1/2009

6ES7307-1KA01-0AA0

SIMATIC S7-300 STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: 24 V DC/10 A 4 G 10/1/2011


RC Repair Code



/ 34

Equipment:



6ES7332-7ND01-0AB0

SIMATIC S7,SM 332 ANALOG OUTPUT CHANNEL TO CHANNEL ISOLATION, 4 AO, 15 BIT RESOLUTION, 0-10V, 1-5V, +/-10V, +/-20MA, 0/4 - 20MA, 20 PIN, FIT FOR ISOCHRONE MODE

7 W 10/1/2009

6GK1143-0AB01

SINEC H1 CP143 TF INTERF.MODULE SINEC COMMUNICATIONS PROCESSOR F. CONNECTING SIMATIC S5 PLC TO ETHERNET WITH AP/TF COMM. PROTOCOL W. 15V MODULE

1 U 10/19/2006


The successors to items from this level may only be partially compatible

(e.g. changed frame size, software version XY required, etc.).

It is recommended that the stock level of these parts is checked. If the stock level is not sufficient for the life cycle of the plant, we recommend the following measures:

1. Check the compatibility of successor modules and possible conversion of critical parts.

2. Check the measures to increase lifetime


RC Repair Code



/ 34

Equipment:



6ED1052-1HB00-0BA0

LOGO!24RC,LOGIC MODULE,DISPLAY PU/I/O: 24V/24V/RELAY + CLOCK MOUNTING ON DIN RAIL STANDARD N EAN: 4025515050681

1 9/1/1999 -

6ES7131-0BL00-0XB0

*** SPARE PART*** SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 32DI 24V DC, 3MS INPUT DELAY

2 U 10/1/2015 -

6ES7132-0BL01-0XB0

*** SPARE PART*** SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 32DO, 24V DC, 0.5A 2 U 10/1/2015 -

6ES7133-0BL00-0XB0

*** SPARE PART*** SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 16DI 24V DC, 16DO 24V DC/0.,5A STANDARD

3 U 10/1/2015 -

6ES7134-0HF01-0XB0

*** SPARE PART*** SIMATIC DP, ELECTRONIC MODULE ANALOG, FOR ET 200B, W=160MM, 4AI 0(4)...20MA; +/- 10V, FAST CONVERSION, 12 BITS

4 W 10/1/2015 -

6ES7135-0HF01-0XB0

*** SPARE PART*** SIMATIC DP, ELECTRONIC MODULE ANALOG, FOR ET 200B, W=160MM, 4AO 0(4)...20MA; +/- 10V, 11 BIT, 12 MBIT/S

1 U 10/1/2015 -

6ES7134-0KH01-0XB0

*** SPARE PART*** SIMATIC DP, ELECTRONIC MODULE ANALOG, FOR ET 200B, W=160MM, 8AI (THERMOCOUPLES) OR 4AI (PT100); 12 BIT

2 W 10/1/2015 -

6ES7131-0BL10-0XB0

*** SPARE PART*** SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 32DI 24V DC, 0.2MS INPUT DELAY

1 W 10/1/2015 -

C79451A3117B84

LOGIC BOARD FOR RACK 1 5/1/2003 -

6DS9002-8AA SUBRACK FOR 1 EXTENSION UNIT WITHOUT POWER SUPPLY MODULE, MAXI-TERMI-POINT SYSTEM 2 11/1/1992 -

6DS9006-8AA SUBRACK FOR 1 EXTENSION UNIT WITH SLOTS FOR POWER SUPPLY MODULE AND 12 I/O MODULES, MAXI-TERMI-POINT SYSTEM

2 11/1/1992 -

6DS4407-8AA POWER DISTRIBUTION TIER DC 24 V WITH SLOTS FOR 2 BUS CONVERTERS 2 8/1/1992 -

6DS9002-8AB SUBRACK FOR 1 EXTENSION UNIT WITHOUT POWER SUPPLY MODULE, WIRE-WRAP SYSTEM 1 11/1/1992 -

6DS9005-8AC SUBRACK FOR AS 231 BASIC UNIT, WIRE-WRAP 1 11/1/1992 -

6DS9006-8AB SUBRACK FOR 1 EXTENSION UNIT WITH SLOTS FOR POWER SUPPLY MODULE AND 12 I/O MODULES, WIRE-WRAP SYSTEM

2 11/1/1992 -

6SC9811-2BE30 MAINS TRIGGER UNIT AND DC-LINK CONTROL MODULE (DLC) SOFTWARE V3.1 FOR 6SC36/37, 6SE35/36 AND 6SE51/52 CONVERTERS

5 R0 6/1/2008 -

6SC9830-0BD01

INTERF.AND SIGN.TRANSDUCER(IST) FOR 6SE3550/80-.C, 6SE3550/80-.D, 6SE3550/80-.J, 6SE3550/80-.K, 6SE5150/80-.C, 6SE5150/80-.D, 6SE5150/80-.J AND 6SE5150/80-.K CONVERTERS SUBST.: 6SC9830-0BB10

5 R0 6/1/2008 -

6SC9833-0BF00 RECTIFIER TRIGGER MODULE (RTM1) FOR 6SE35/36 CONVERTERS 40, 50, 60 AND 80KVA 4 R0 6/1/2008 -


RC Repair Code



/ 34

Equipment:



6SC9836-0FA03 SUBRACK FOR 6SC36/37, 6SE35/36, 6SE51/52 AND 6SC23 CONVERTERS SUBST.: 6SC9836-0FA04 4 R0 6/1/2008 -

6SC9837-0KA01 OPERATOR PANEL (OP) FOR 6SC36/37, 6SE35/36, 6SE51/52 AND 6SC23 CONVERTERS 4 R0 6/1/2008 -

6ES5101-8UA13

SIMATIC S5 101U CENTRAL CONTROLLER F. 1K STATEMENTS MAINS CONNECTION 220/240V AC W/O BACKUP BATTERY,W/O MANUAL 20 INPUTS, 24V DC 12 RELAY CONTACT OUTPUTS

1 10/1/2005 -

6ES5440-8MA12 SIMATIC S5 440 DIGITAL OUTPUT MODULE NON-FLOATING F. S5-90U/-95U/-100U, ET 100U, ET 200U,4 OUTPUTS 24V DC; 0.5A

3 U 10/1/2010 -

6ES5340-3KB41 SIMATIC S5, 340 MEMORY MODULE COMPACT VERSION RAM, 64 KBYTES 1 W 10/24/2007 -

6ES5420-3BA11 SIMATIC S5, 420 DIGITAL INPUT NON-ISOLATED 32 INPUTS, 24 V DC COMPACT VERSION K 24 N 10/22/2006 -

6ES5445-3AA12 SIMATIC S5, 445 DIGITAL OUTPUT NON-ISOLATED 32 OUTPUTS 24V DC/0.5A COMPACT VERSION K 34 U 10/25/2007 -

6ES5512-5BC21 SIMATIC S5, 512 INTERF. MODULE EXPANSION BOARD AVAILABLE AS A SPARE PART ONLY! 1 10/1/2002 -

6ES5926-3SA11 SIMATIC S5, 926 CPU F.S5-150S,-150U CENTR.CONTROLL. 2 R0 10/25/2007 -

6ES5950-1AB61 SIMATIC S5,, 950 POWER SUPPLY UNIT F. EU 182-3K,DC 24V/5V 8A 4 12/1/2003 -

6DS9006-8BA SUBRACK WITH SLOT ADDRESSING 2 R0 5/1/2014 -

6ES5756-0AA11 SIMATIC S5, JUMPERING MODULE F. PC S5-150U AVAILABLE AS A SPARE PART ONLY! 1 10/1/2001 -

6GK1100-0AJ00

SIMATIC NET, SIBUKO PACKAGE 6 FOR INDUSTRIAL ETHERNET CONTAINS TAPPING MECHANISM WITH N-TYPE CONNECTOR,TRANSCEIVER, WITH 2 INTERF., MOUNTING PLATE, 2 INSTALLATION KITS AND INSTALLATION GUIDE (GERMAN, ENGLISH, FRENCH)

1 W 10/1/2012 -

6ES5525-3UA21 SIMATIC S5 CP 525 COMMUNICATIONS PROCESSOR F. PLC, MINICOMPUTER, PRINTER F. PROGRAMMER W. S5-DOS

1 R0 3/7/2008 -

6DS4407-8BA POWER DISTRIBUTION TIER DC 24 V 1 11/1/1992 -

6DS4407-8CA POWER DISTRIBUTION TIER DC 24 V 1 R0 5/1/2014 -



RC Repair Code



/ 34

A modernization of critical plant areas is strongly recommended in order to safeguard plant availability and the security of supply.


RC Repair Code



/ 34

Equipment:



C79451A3117B83 1 - -

P79007-A505-E1 1 - -

6ES7443-1EX11-0XE0 1 - -

6DS9005-8BC 1 - -

6SC9811-4BE32 3 - -

6SC9821-0BG50 5 - -

6SC9832 4 - -

KNI:KNICKDCTRAFO 8 - -

KNI:KNICKPT100 8 - -

SET:459.001.0225.01 4 - -

SET:459.002.9222.61 12 - -

6SC9811-4BC20 2 - -

6DS9901-8BA 2 - -

6DS8137-8QD 1 - -


The article number should be checked.



3. Recommendations for the next steps

3.1. Recommended actions based on the evaluation of the predicted product life cycle (See item 2.3)

Level Description Recommended action Service recommendations

Availability horizon > 5years

No measures are required, since availability is guaranteed for the foreseeable future.

- Cyclic availability analysis

Availability horizon 2 to 5years

Measures for increasing availability during planning should be considered in the medium-term.


Availability horizon 1 to 2years

Measures to increase the security of supply should be drawn up immediately, e.g. measures to increase lifetime, increased stock level or plant modernization.


- Asset optimization

- Consulting

Availability horizon < 1year

Measures to increase the security of supply should be drawn up immediately, e.g. measures to increase lifetime, increased stock level or plant modernization.



- Consulting

Item has been totally discontinued, or successor only conditionally compatible

It is recommended that the replacement/successor type is checked for compatibility and the possibility of being used in the plant/system configuration.

If the replacement type cannot be used, then the stock inventory for this part should be checked, and when necessary, preparations immediately made for replacing critical parts.


- Migration

- Upgrade

- Consulting

Item has been discontinued and no successor has been defined; repair or replacement may be possible to a limited extent

A conversion of critical plant areas is strongly recommended in order to safeguard plant availability and the security of supply.


- Migration

- Upgrade

- Consulting

Unknown article number The article number should be checked. - Plant inventory documented

- Consulting



3.2. General recommended actions with respect to spare parts

Spare part packages

Despite the excellent quality of Siemens automation products, the service life of some parts of electrical components is essentially limited by operating and environmental conditions. The probability of failure increases with age and operating time, which in turn can affect the availability of your overall plant. This means that there is a risk of a long production outage.. For plants and systems with high availability demands and the shortest possible downtimes in the event of faults, it is advisable to store spare parts directly on site.



3.3. Explanation and significance of Siemens repair codes

RC Description

W Spare part procurement, replacement or repair possible

U Replacement or repair possible In the event of a replacement, it is essential that the replaced part is returned

R0 Repair possible; spare part procurement may be possible

RM Repair possible only by the mobile repair service

N Spare part procurement possible, cannot be repaired

G Spare part procurement possible, cannot be repaired; return of defective parts to repair site within the liability for defects period

GC Spare part procurement possible, can only be calibrated; return of defective parts to repair site within the defect liability period

S1 Not in stock or customer-specific parts

S2 Repair in regional repair workshops

S3 Replacement or repair price based on damage classes

S4 Spare part procurement in “new parts business” Cannot be repaired, but part must still be returned for quality reasons

S5 Spare part procurement in “new parts business” Cannot be repaired, but part must still be returned within the defect liability period for quality reasons

3.4. Legends

3.4.1. Machine categories

Machine category Description

A sufficient number of replacement parts is available on short call

No longer in the product catalog and only a few replacement parts are available

Corrective maintenance through identified repair

Discontinued provision of spare parts and no warranty claims

Cannot be assigned E.g. due to unknown parts



4. Additional services

Siemens Services

Continually increasing requirements demand that industrial plants operate with maximum productivity and efficiency. The Siemens industrial service portfolio ensures that companies can achieve the decisive competitive advantage.

Irrespective whether manufacturing or process industry, the high cost pressure, rising energy prices and increasingly stringent environmental requirements mean service has become a decisive success factor in the competition for industry. With this regard, Siemens supports its customers with product, system and application-oriented services over the complete life cycle of a plant. From planning and development, including the operation, through to the modernization, customers profit not only from the industry services, but also from the comprehensive technology and product know-how and the industry-sector competency of the Siemens experts worldwide. This reduces downtimes and the use of resources. The result: improved productivity, flexibility and efficiency coupled with lower overall costs.

Service contracts - modular and customized

With the help of individual service modules, we can adapt modular service contracts to the requirements of your machine or plant – from cost-effective standby services right through to complex modernizations. We can also draw up options such as extended service periods, defined response times or special maintenance intervals. But one thing is certain: with a service contract you’ll benefit from the highest availability and productivity of your plant or system from start to finish.

Retrofit

Retrofit is usually the economical solution for extending the service life of the complete plant. Once all the measures to increase lifetime (e.g. upgrade service) have been exhausted, Siemens can replace your old technologies with state-of-the-art drives and motors from the current product range. This also includes the possibility to equip previously installed motors with variable-speed drives that not only reduce costs thanks to energy savings but also help to optimize your processes. Siemens Large Drives is also able to remanufacture older generation motors (provided the original manufacturer documentation is available). This can usually avoid the need for a time-consuming requalification of the new machine.



You can find further information on Siemens services on the Internet at:

https://support.industry.siemens.com/sc/ww/en/sc/

Contact

Please refer to one of the following SIEMENS representatives when you are interested in one of our services::

Contact person in service:


Service 070 – 333 35 35 [email protected] NL

5. General terms and conditions

The "General business conditions for consulting services" also apply Edition April 2013, see attachment.

Lifecycle Information Services Basic (machine) -...

Documents

Transcript of Lifecycle Information Services Basic (machine) -...