License-free Wireless Bridging/Switching LAN Extension for...
Transcript of License-free Wireless Bridging/Switching LAN Extension for...
Solution Features
• Extends data service to branch offices
• Bridges local area networks
• Integrates wirelessWAN/LAN connections
• Internetworks office complexes or campuses
• Offers cost-effectiveconnectivity with rapid ROI
• Provides 28 times the bandwidth of a single T1
Now enterprise users can reduce LAN connectivity costs with wirelessbridging/switching with the ADTRAN™ TRACER 5045. It enables high-speed,point-to-point LAN connectivity for data transport over license-free, wirelesslinks at distances up to 25 miles. A 45 Mbps full-duplex (90 Mbps aggregate)bridge and four-port Ethernet switch support enterprise WAN/LAN integra-tion, LAN extension, and LAN-to-LAN connectivity. TRACER 5045 offers 28times the bandwidth of a single T1 and replaces multiple pieces of equip-ment to lower equipment investment and simplify overall network operation.With TRACER 5045, users can implement complete WAN/LAN wireless net-works using a single piece of equipment at both host and remote locations.
Users seeking to connect LAN networks between buildings or across campuses can use the TRACER 5045 for high-speed data connectivity. In this application, the TRACER 5045 is providing a 45 Mbps link betweenBuildings A and B. All traffic is bridged over the wireless link and traffic maybe switched between devices connected to the four 10/100BaseT Ethernetports. Using these ports, network managers can easily establish a connectionto existing LAN devices and extend services to remote locations or branchoffices for LAN-to-LAN applications. TRACER 5045 is also ideal for time-critical installations where businesses need to rapidly deploy a data networkand seek to minimize installation time.
TRACER 5045 is an ideal solution when high-speed wireline services are cost-prohibitive or unavailable. Depending on current wireline tariffs,ROI could be less than one year. Also, because TRACER 5045 operates in thelicense-free ISM band, there are no licensing fees or coordination. This alsomakes TRACER 5045 easy to install and provides rapid service availability.Combined with ADTRAN’s industry-leading service and support, along witha five-year North American warranty, TRACER 5045 is one of the most cost-effective decisions you can make for high-speed data transport.
Building A
Building BRF Cable
RF Cable
10/100BaseT
10/100BaseT10/100BaseT
10/100BaseT
LANLAN
LAN
45 Mbps Full Duplex
25 Miles
Line-of-Sight
LAN
10/100BaseT
10/100BaseT10/100BaseT
10/100BaseT
LANLAN
LAN
LAN
TRACER 5045Wireless Bridge/Ethernet Switch
TRACER 5045Wireless Bridge/Ethernet Switch
License-free Wireless Bridging/Switching
LAN Extension for High-speed Data TransportFeaturing TRACER® 5045
Specifications subject to change without notice. ADTRAN is a trademark of ADTRAN Inc.TRACER is a registered trademark of ADTRAN, Inc. All other registered trademarks andtrademarks mentioned in this publication are the property of their respective owners.
Product SpecificationsTransmitter
� Output power: +5 to +20 dBm (3 to 100 milliwatts)� Frequency band: 5.725 to 5.850 GHz ISM band� Channel bandwidth: 50 MHz
Receiver� Receive level threshold (10-6 BER): -78 dBm� Maximum receive level: -30 dBm� Nominal receive level: -55 dBm� Frequency range: 5.725 to 5.850 GHz ISM band� Channel bandwidth: 50 MHz
Frequency plan� Plan A center frequencies: TX 5.747 GHz, RX 5.827 GHz� Plan B center frequencies: TX 5.827 GHz, RX 5.747 GHz
RF Interface� Antenna connector: female type-N� Impedance: 50 ohms
User Interface� Front panel: Status LEDS� Diagnostics: Self-test LED, LAN/WAN activity LEDS� Test points: RSSI� Alarm contacts: RF carrier loss,
normally open and closed
Supported Features� Layer 2 Switching and MAC Bridging
Ethernet Interfaces� Four auto-sensing 10/100BaseT Ethernet ports� Maximum frame size: 1536 bytes (802.3 compliant)� Auto MDI/MDIX support on all interfaces� Back-pressure flow control for
half-duplex interfaces� Pause-frame flow control for
full-duplex interfaces
TRACER®
5045Wireless Bridge with Integral Ethernet SwitchADTRAN, Inc.
Attn: Enterprise Networks901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000Huntsville, AL 35814-4000
256 963-8000 voice256 963-8699 fax
256 963-8200 fax back
General Information800 9ADTRAN
Pre-Sales Technical Support
800 615-1176 [email protected]
www.adtran.com/support
Where to Buy877 280-8416 toll-free
[email protected]/where2buy
Post-Sales Technical Support
www.adtran.com/support
ACES Installation &Maintenance Service
www.adtran.com/support
International Inquiries256 963 8000 voice
256 963-6300 [email protected]
www.adtran.com/international
For the regional office nearest you, visit:
www.adtran.com/where2buy
Terminal Interface� Function: Menu-driven user interface, monitor and
control of local and remote end of link, password protection, event history, Ethernet statistics
� Emulation: VT100� Data rate: 9600 bps� Physical interface: Female DB25� Electrical interface: RS-232
Mechanical and Environmental� Operating temperature: -25ºC to 65ºC� Width: 17.22" (for 19" EIA rackmounting – hardware
accommodates both 19 and 23-inch bays)� Height: 1.72" (1U)� Depth: 9.34"� Humidity: 95%, non-condensing� Weight: 7 lbs.
Power� Input voltage: 21-60 VDC, either polarity
referenced to ground� Power consumption: 23 Watts, maximum� DC connector: 2-pin plug in
Ordering InformationEquipment Part #
TRACER 5045, Freq A 12805045L1ATRACER 5045, Freq B 12805045L1BAC Power Supply 1280650L1
EN533A May 2003Copyright©2003 ADTRAN, Inc.
All rights reserved.
ADTRAN is a TL 9000 registered company.
ADTRAN is a ISO 9001 registered company.