Tiles and planks to glue down

Modular PVC flooring

Urban

®

5610 29 OAK ORGANIC

5607 12 BETON BOUCHARDE

CONCRETE AND slATE XXl

MATERIAls

WOODs

Urban

®

2 0 1 2

S'ENGAGE POUR LA PLANÈTE

UDIREV

Polyurethane PU treated

Wear Layer 0.70 mm Decor film Calendared virgin PVC Calendared virgin PVC Indentation resistance

Indentation resistance

Realistic looks Heavy Traffic

Easy maintenance

LIBERTY Urban LVT

Calendared virgin PVC Indentation resistance

2004EN 14041

EN 649

RZ

ClassificationEN 649

Class 34 - 43

HK PuEasy maintenance

• Bacteriostatic• Fungistatic

Recyclable Virgin PVC

Healthy environment

G A

R A N T I E

USAGE DOMESTIQ

UE7ANS

G A

R A N T I E

USAGE DOMESTIQ

UE01 ANS

G A

R A N T I E

USAGE DOMESTIQ

UE51 ANS

G A

R A N T I E

USAGE DOMESTIQ

UE5ANS

G A

R A N T I E

5ANS

5W A

R R A N T Y

YEARS

C E

E

E

N

T X

B L

C E

E

E

N

T X

B L

Laboratory tested

ÉMISSIONS DANS L'AIR INTÉRIEUR

ABC

A+

A+A+

A+Substancesprincipales :Émission totale :

5610 29 OAK ORGANIC15.24 cm x 91.44 cm

5606 01 WHITE60 cm x 60 cm

5606 02 BlACK60 cm x 60 cm

5607 12 BETON BOUCHARDE91.44 cm x 91.44 cm

5609 15 lINEA GREY18 cm x 120 cm

S'ENGAGE POUR LA PLANÈTE

UDIREV

WOODs

5609 15 lINEA GREY18 cm x 120 cm

5609 18 OAK sNOW18 cm x 120 cm

5609 27 PINE lIGHT GREY18 cm x 120 cm

5609 22 OAK sTEEl18 cm x 120 cm

5609 14 lINEA BEIGE18 cm x 120 cm

5609 17 OAK sIlVER18 cm x 120 cm

5610 31 OAK OlD15.24 cm x 91.44 cm

5609 20 OAK GREY18 cm x 120 cm

5609 24 OAK BROWN18 cm x 120 cm

5609 21 OAK WHITE18 cm x 120 cm

5609 19 OAK lIMED18 cm x 120 cm

5609 23 OAK GREY sIlK18 cm x 120 cm

S'ENGAGE POUR LA PLANÈTE

UDIREV

WOODs

5610 30 OAK NATURE15.24 cm x 91.44 cm

5610 28 WAlNUT15.24 cm x 91.44 cm

5609 25 OAK RUsT18 cm x 120 cm

5609 16 WOOD sTRIP18 cm x 120 cm

5610 29 OAK ORGANIC15.24 cm x 91.44 cm

5609 26 OAK sAWN 18 cm x 120 cm

5606 07 CARAMEl sTEAMED60 cm x 60 cm

5606 01 WHITE60 cm x 60 cm

5606 02 BlACK60 cm x 60 cm

5606 06 RUsT OXYDE60 cm x 60 cm

5606 03 lEATHER BROWN60 cm x 60 cm

S'ENGAGE POUR LA PLANÈTE

UDIREV

MATERIAls 5606 04 lEATHER DARK GREY60 cm x 60 cm

5606 05 TIssUE

60 cm x 60 cm

S'ENGAGE POUR LA PLANÈTE

UDIREV

CONCRETE AND slATE XXl

5607 11 BETON CHOCOlATE91.44 cm x 91.44 cm

5608 13 slATE45 cm x 90 cm

5607 10 BETON BEIGE91.44 cm x 91.44 cm

5607 09 BETON OCHER91.44 cm x 91.44 cm

5607 12 BETON BOUCHARDE91.44 cm x 91.44 cm

5607 08 BETON PERlE91.44 cm x 91.44 cm

lIBERTY URBAN lVT Fitting prescriptions

The installation has to be done according to the prescriptions of the NF DTU 53.2 Standard.The floor must be flat, smooth, dry and sound.The product used for repair or renovation should have class P3 and the floor temperature ≥ 15°C.

1 - Installation:

LIBERTY URBAN must be stored 48 hours before installation:- in a closed room with normal relative humidity,- with at an ambient temperature of 15 °C,- on a flat surface.

2 - Storage of the tiles and planks:

A simple emulsion application is realised with:

a fine-dented spatula 150 to 200 g/m2, type A4. Change the spatula as frequently as needed in accordance with this pre-scription.

Application recommendations: - To follow scrupulously the prescriptions of the supplier. - Respect the gum/impregnation time depending on the tem-

perature, humidity, the porosity and the consumption of glue.

- Wait till the preparation product is translucent to fit the tiles and planks.

3 - Adhesives* :

* refer to the technical data from the supplier.

MANUFACTURER ADHESIVEBOSTIK ADESITECHMANG DALFIXSADER SADER TACUZIN U 1000 MAPEI ULTRABOND ECOFIX CEGECOL CEGE 100 DPA

4 - Fitting the tiles:

Attention! Check the products for visible defects prior the in-stallation. Don’t install faulty planks or tiles. If any differences in aspect occur, contact your supplier before starting or continu-ing the work to find an agreement of how to proceed.

A/ Way of installation:

- Normal:

- Optional:In this case one eliminates the gloss-matt effects, but with more visible joints

The installation must be done with a temperature of minimum 15 °C, same for the underfloor.

TECHNICAl fEATUREs LIBERTY URBAN LVT

2004EN 14041

EN 649

RZ

Description Floor: 100 % virgin PVC, heterogeneous planks (18 cm x 120 cm and 15.24 cm x 91.44 cm) and tiles (60 cm x 60 cm, 91.44 cm x 91.44 cm or 45 cm x 90 cm). PU treated for easy maintenance.

Recommended areas for use

Offices and commercial areas

Version du 1/09/2011 - Sous réserve de modifications techniques

Wear resistance EN 649

Class 34-43

Fire resistance onincombustible support

Presentation - Planks 18 x 120 cm carton of 15 planks = 3.24 m2

- Planks 15.24 x 91.44 cm carton of 24 planks = 3.34 m2

- Tiles 60 x 60 cm carton of 12 tiles = 4.32 m2

- Tiles 91.44 x 91.44 cm carton of 6 tiles = 5.01 m2

- Tiles 45 x 90 cm carton of 10 tiles = 4.05 m2

Installation Flat surface, dry, clean and sound. Grout class P3.

Maintenance With a floor cloth and a neutral detergent.Maintain daily with broom or vacuum cleaner.No rubber caps or wheels.

HKBfl-s1

Total thicknessWear layerAbrasion classSurface treatmentResistance to bacteria

Formaldehyde

Total weightResidual indentationDimensional stabilitySlip resistanceElectrostatic characteristicsLight fastnessWarranty

2.5 mm0.70 mmTPolyurethane PU Treated bacteriostatic and fungistaticZero emission

3.900 kg/m2

0.02 mm< 0,50 % (EN 434 < 0,25%)R9Antistatic > 65 years, commercial use

G A

R A N T I E

USAGE DOMESTIQ

UE7ANS

G A

R A N T I E

USAGE DOMESTIQ

UE01 ANS

G A

R A N T I E

USAGE DOMESTIQ

UE51 ANS

G A

R A N T I E

USAGE DOMESTIQ

UE5ANS

G A

R A N T I E

5ANS

5W A

R R A N T Y

YEARS

ÉMISSIONS DANS L'AIR INTÉRIEUR

ABC

A+

A+A+

A+Substancesprincipales :Émission totale :

LIBERTY URBAN floors are PU surface protected for: - easy cleaning,- removal of products left on the surface, which may have been used for installation,A proper maintenance program protects the floor from wear and helps to maintain it’s appearance.We recommend for following the normal maintenance procedures according to the traffic in the given areas, and avoiding to blend maintenance products of different brands or compositions in all phases of cleaning operations.

Once fitting is completed, need to respect a minimum of 48 hours drying time. After that, just sweep or vacuum clean the floor off dust. A simple sweeping with a neutral detergent type Jontec Asset from Johnson or PU cleaner from Dr. Schutz to eliminate dirt before use.

Clean with a monobrush at 200 rpm + red disk. (Possible with a brush turning up to 400 rpm, with an appropriate disk for the speed). The detergent is pulverised (spray). No need to rinse, just take some time to dry before the next operation. Flat clean with water, cleaning and/or protecting agent in the correct proportions. Once the surface is dry operate the mono brush with the red disk at a speed of 400 rpm.

If no monobrush is available (apartment buildings, stair cases, small area’s and inaccessible ones) clean manually with a synthetic red or blue sweeping brush and a detergent till all stains are re-moved.

No need to scrape the floor if the workshop has been realised according to the normal standards.

In case a PVC floor is very heavily stained, repair will give it its initial appearance back (recommend-ed repair products: Jontec N°1 from Johnson, Intensive Cleaner R from Dr.Schutz…). A monobrush treatment with 200 rpm or an auto washing device equipped with the red disk would do the job.

1/ Before use

2/ Current maintenanceInitial cleaning: Step 1 : Humid sweeping with trapeze brush + impregnated gauze.Step 2 : Flat wash with cotton cloth for the stained spots.Regular Maintenance: Step 1 : Humid sweeping with trapeze brush + impregnated gauze.Step 2 : Mono brush (≤ 400 rpm) + red disk + neutral spray detergent. Step 3 : Flat wash with cotton cloth.Step 4 : Polish with mono brush (≤ 400 rpm) + beige or white disk, after drying.Periodic cleaning:Step 1 : Humid sweeping with trapeze brush + impregnated gauze.Step 2 : Spread well the detergent solution and let it penetrate a couple of minutes.

Monobrush (≤ 150 à 200 rpm) with red disk. Vacuum clean and rinse with always clean water. Dry.

Step 3 : Flat wash with cotton cloth.Step 4 : Polish with monobrush (≤ 400 rpm) + beige or white disk.We recommend a systematic maintenance program for the high-traffic areas. Other maintenance methods, similar to the ones described above, can also be used. The frequencies are given for in-formation. They will always adapt depending on traffic and the desired final appearance.

lIBERTY URBAN lVTMaintenance

Like all flexible flooring, LIBERTY URBAN LVT must be protected against indentation of furniture, sharp objects and other heavy objects.The use of leather, plastic or felt are recommended (no rubber or metal plates). The entrance areas need to be protected by walk-off mats, which are sufficiently large.Efficient walk-off protection zones are composed of the following elements: - a grid with feet scraper to eliminate stones etc, - a synthetic rug to take all the dirt and dust, - a textile rug to take away all humidity.The ideal length would be, for the three, 7 to 8 m, for areas of high traffic (to be sure that all dirt is eliminated from the shoes).

4/ Protection

We remind that some products are forbidden: - Pure bleaching agents (possible if diluted at 10 %).- Strong solvents (like acetone…).- Glazing products and varnish (not to confuse with repair emulsions).These products can cause permanent discolorations of LIBERTY URBAN LVT. Never use aggressive disks during regular maintenance (like the black, brown or green ones).

3/ Practical recommendations

B/ Marking:Mark the departure lines.

C/ Application of the tiles:

• Apply the first row following a line perpendicular to the door.

• Link the following row of tiles to the first.

Attention! Check the products for vis-ible defects prior the installation. Don’t install faulty planks or tiles. If any dif-ferences in aspect occur, contact your supplier before starting or continuing the work to find an agreement of how to proceed.

The installation must be done with a temperature of minimum 15 °C, same for the underfloor.

Installation principle:- Divide the floor surface in 2 parts

with a line perpendicular to the en-tree of the room.

- Put the first plank then to continue following the line.

- Install the planks following the ar-rows on the back.

- The first plank of the second row must be placed at 1/3 of the length in the lateral direction to bring the joints of the 3 rows in line. This is a better solution compared to the one that shifts by half a plank because less aesthetic.

- Other installation possibilities: her-ringbone and specific ones…

5 - Fitting the planks:

This is a compulsory operation to be done twice: - Manually with a buttress or strut.- With a heavy roller to pass on the to-

tal surface of the floor at the end of the installation, to evenly spread the glue under the tiles/planks.

6 - Spreading the glue:

- For normal walking traffic: after 24 hours.

- Installation of furniture etc: after 48 hours.

- No rubber caps of wheels.- In case of floor heating: start the

heating progressively.

7 - Putting into use / Circulation:

www.liberty-llt.com

Homedecor International

édition 2012

geo

rges p

aum

ier co

mm

un

ication

!w

ww

.gpau

mie

r.com