LHA2000LC / LHA4000LC Series - Quick Networking Guide · Configure settings for selected channel...

2
Before You Start: • Make sure you have a router and high-speed Internet access (not included). • Connect your DVR to your router using an Ethernet cable (see the Quick Connection Guide for details). • Upgrade your DVR firmware and client software or mobile app to the latest versions. LHA2000_LHA4000_LC_QNG_EN_R3 Find Your Device ID Record your information below: DEVICE ID: The Device ID is printed on a label on the top panel of the DVR. Device ID: xxxxxxxxxxx 1 • Please note that an upload speed of 3.5 Mbps is required for remote video streaming. Up to 3 devices may connect to the system at the same time. HD Digital Video Surveillance Recorder LHA2000LC / LHA4000LC Series Quick Networking Guide a Tap to open the menu. Tap Devices, then tap Add. b c d Smartphone / Tablet Setup Install the free Lorex Cirrus app from the App Store or Google Play Store. Tap the Lorex Cirrus icon to open the app. e 2 Live video from your security system will appear on the app. Double-tap one of the channels to see video from a single camera. A B C D E F A B C D E F Ensure Device ID is selected. Tap to scan the QR code on the top of your recorder using the camera on your mobile device. Ensure the Client Port reads 9000. Enter the username (default: admin). Enter the the secure password you recorded on the Quick Connection Guide Tap Save. Enter the following: Main menu Select channels for live viewing from all connected devices Configure settings for selected channel Channel name Date and time stamp Split-screen options Save a snapshot of the current live view Tap to enable the camera’s intercom; tap again to stop Tap to start manual recording; tap again to stop Tap to switch to full HD video quality; tap again for reduced video quality that is optimized for streaming Tap to switch between muted and unmuted Live View Overview: NOTE: For complete app instructions, see the Lorex Cirrus instruction manual on your product page at lorex.com

Transcript of LHA2000LC / LHA4000LC Series - Quick Networking Guide · Configure settings for selected channel...

Page 1: LHA2000LC / LHA4000LC Series - Quick Networking Guide · Configure settings for selected channel Channel name Date and time stamp Split-screen Save a options snapshot of the current

Before You Start:

• Make sure you have a router and high-speed Internet access (not included).

• Connect your DVR to your router using an Ethernet cable (see the Quick Connection Guide for details).

• Upgrade your DVR firmware and client software or mobile app to the latest versions.

LHA2000_LHA4000_LC_QNG_EN_R3

Find Your Device ID

Record your information below:

DEVICE ID:

2

The Device ID is printed on a label on the top panel of the DVR.

Device ID: xxxxxxxxxxx

1

• Please note that an upload speed of 3.5 Mbps is required for remote video streaming. Up to 3 devices may connect to the system at the same time.

HD Digital Video Surveillance RecorderLHA2000LC / LHA4000LC SeriesQuick Networking Guide

a

Tap to open the menu. Tap Devices, then tap Add.

b

c

d

Smartphone / Tablet SetupInstall the free Lorex Cirrus app from the App Store or Google Play Store. Tap the Lorex Cirrus icon to open the app.

e

2Live video from your security system will appear on the app. Double-tap one of the channels to see video from a single camera.

A

B

C

D

E

F

A

B

CDE

F

Ensure Device ID is selected.

Tap to scan the QR code on the top of your recorder using the camera on your mobile device.

Ensure the Client Port reads 9000.Enter the username (default: admin).

Enter the the secure password you recorded on the Quick Connection GuideTap Save.

Enter the following:Main menu

Select channels for live viewing from all connected devices

Configure settings for selected channel

Channel name Date and time

stamp

Split-screen optionsSave a

snapshot of the current live

viewTap to enable the camera’s intercom; tap again to stop

Tap to start manual recording; tap again to stop

Tap to switch to full HD video quality; tap again for reduced video quality that is optimized for streaming

Tap to switch between muted

and unmuted

Live View Overview:

NOTE: For complete app instructions, see the Lorex Cirrus instruction manual on your product page at lorex.com

Page 2: LHA2000LC / LHA4000LC Series - Quick Networking Guide · Configure settings for selected channel Channel name Date and time stamp Split-screen Save a options snapshot of the current

Copyright © 2019 Lorex CorporationAs our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.

Quick ReferenceDefault access information:• Default user name: admin• Default password: 00000000

Default system ports:• HTTP Port: 80• Client Port: 9000

If you have forgotten your password, contact Lorex technical support.

See the label on top of your DVR for your Device ID

If you are having trouble connecting, try the following:

• Restart the DVR by disconnecting the power adapter, then reconnecting it.

• Ensure the DVR is connected to the router using an Ethernet cable and then restart the DVR.

• Double check the Username, Password, and Client Port.

• Ensure your DVR has the latest firmware.

• Ensure your mobile app is up-to-date.

TroubleshootingNeed Help?

Visit us online for up-to-date software and complete instruction manuals

Click on the Downloads tab4

Visit lorex.com

Search for the model number of your product

Click on your product in the search results3

2

1

Congratulations! You can now view video from your cameras on your PC or Mac.

LHA2000_LHA4000_LC_QNG_EN_R3

PC / Mac Setupa

• PC Users: Download and install Lorex Client 13 for PC from lorex.com.

Download and install the client software:

• Mac Users: Download and install Lorex Client 13 for Mac from lorex.com. Double-click to extract the software, then drag the software to Applications.

b

c

Click Login.d

Double-click the Lorex Client 13 icon ( ) on the desktop or Applications list.

Enter the DVR’s Device ID recorded in section 1

3

Enter the following information:

Enter the DVR’s Client Port (default: 9000)

Enter the DVR’s user name (default: admin)

Enter the secure password you created for the DVR

e All connected cameras are shown on screen in the Lorex Client 13 home screen.

NOTE: For full instructions on how to use the Lorex Client 13 software for PC and Mac, see your DVR’s instruction manual at lorex.com.

HD Digital Video Surveillance RecorderLHA2000LC / LHA4000LC SeriesQuick Networking Guide