LG PLC Smart I/O
description
Transcript of LG PLC Smart I/O
LG PLC1
LG PLC
Smart I/O
LG Industrial Systems
LG PLC2
Smart I/O is:Open-type remote I/O module, connected with a field network, for real-time
controlling I/O modules distributed in a field
CompactCompact Compact design supporting DIN Rail
FlexibleFlexible Supporting four field networks (Rnet/Profibus-DP/DeviceNet/Modbus)
Having various I/O modules (16/32 points, DC/Relay/TR type)
Available to systematise other devices in various ways
EasyEasy Setting parameters easily using dedicated configurator (Sycon) or GMWIN/KGL-
WIN without additional programming (Rnet/Profibus-DP/DeviceNet)
Simplification of a program (Modbus) through the LGIS FB (command)
LG Smart I/O
LG PLC3
LG Smart I/O
1. Compact Size
A (Length) B (Width) C (Depth)
16-point I/O 115mm 50mm 39mm
32-point I/O 176mm 50mm 39mm
16-point Module 32-point Module
LG PLC4
LG Smart I/O
2. Four Field Networks Support
Item Rnet Profibus-DP DeviceNet Modbus
Protocol LGIS Dedicated Rnet Protocol(Fnet for Remote)
Profibus-DP(RS-485/EN50170)
DeviceNet(CAN)
Modbus(RS-422)
Transmission speed
1Mbps 9.6kbps~12Mbps 125/250/500kbps 2.4kbps~38.4kbps
TransmissionDistance
750m/segment 100m~1.2km 500/250/125m(Thin cable: 100m)
500m
Topology BUS BUS Trunk & Drop BUS
TransmissionMethod
Token pass& Broadcast
Token pass &Master/Slave (Poll)
CSMA/NBA (PollCyclic,COS,Strobe)
Master/Slave(Poll)
Max. number of stations
32 sta./segment(in 32sta./out 32 sta.)
32 sta./segment(sta. #: 1~99)
64 stations 32 stations
Link Capacity 2,048pt./master(64 sta. * 32 pt.)
1K/master: -PUEA7K/master: -PUEB
2,048pt./Master 64pt./station
LG PLC5
U.S. Europe
AB (Rockwell) -dominated DeviceNet applied in the U.S. and
Siemens-dominated Profibus-DP standardised in Europe are a new trend
: Network supporting LGIS Remote * The above is the relative data based on the VDC document.* Dedicated network systems are not included.
♣ Field Network Application Overview
LG Smart I/O
LG PLC6
LG Smart I/O
3. Various I/O Modules (24 types in total)
ItemsInput Output Mixed Input/Output
DC (Sink/Source) TR (Sink) Relay DC (Sink/Source)
TR (Sink)
Points 16 32 16 32 16 16 16
Rated Input (Load Voltage)
DC 24V DC24V DC24V/AC110V/
220V
DC24V DC24V
Rated Input Current(Load Current)
7mA 0.1A/2A 2A/5A 7mA 0.1A/2A
Response Time
Off/On Under 3ms Under 0.5ms Under 10ms Under 3ms Under 0.5ms
On/Off Under 3ms Under 1ms Under 10ms Under 3ms Under 1ms
Common (point/COM) 16points/COM 16points/COM 8points/COM 16pt./COM 16pt./COM
Current Consumption 35mA 40mA 30mA 65mA 400mA 35mA 30mA
SupportingNetwork &
Part Number
Rnet GRL-D22A GRL-D24A GRL-TR2A GRL-TR4A GRL-RY2A GRL-DT4A
Profibus GPL-D22A GPL-D24A GPL-TR2A GPL-TR4A GPL-RY2A GPL-DT4A
DeviceNet GDL-D22A GDL-D24A GDL-TR2A GDL-TR4A GDL-RY2A GDL-DT4A
Modbus GSL-D22A GSL-D24A GSL-TR2A GSL-TR4A GSL-RY2A GSL-DT4A
LG PLC7
LG Smart I/O
4. System Configuration - Flexible Flexible LG PLC Interface
PO
WE
R
CP
U
RU
EA
I/O I/O I/O
#1 Smart I/O #2 Smart I/O #3 Smart I/O
GLOFA/Master-K(Master)
RNET (1Mbps, Twisted Pair)
#N Smart I/O
PO
WE
R
CP
U
CU
EA
I/O I/O I/O
GLOFA-GM(Master)
GM7/K80S (Master국 )
CPU Master Module Remote I/O
GM3, K1000S G3L-RUEA GRL-D22AGRL-D24AGRL-TR2AGRL-TR4AGRL-RY2AGRL-DT4A
GM4, K300S G4L-RUEA
GM6, k200S G6L-RUEA
#1 Smart I/O #2 Smart I/O #3 Smart I/O
Modbus (RS-422, Max 38.4kbps)
#N Smart I/O
CPU Master Module Remote I/O
GMR/1/2/3 G3L-CUEA GSL-D22AGSL-D24AGSL-TR2AGSL-TR4AGSL-RY2AGSL-DT4A
GM4 G4L-CUEA
GM6 G6L-CUEC
GM7, K80S G7L-CUEC
LG PLC8
LG Smart I/O
PO
WE
R
CP
U
PUEA
I/O I/O I/O
GLOFA/Master-K(Master)
PO
WE
R
CP
U
DU
EA
I/O I/O I/O
GLOFA/Master-K(Master)
#1 Smart I/O #2 Smart I/O #3 Smart I/O
Profibus-DP (Max 12Mbps)
#N Smart I/O
#1 Smart I/O #2 Smart I/O #3 Smart I/O
DeviceNet (Max 500kbps)
#N Smart I/O
CPU Master Module Remote I/O
GM3, K1000S G3L-PUEA/B GPL-D22AGPL-D24AGPL-TR2AGPL-TR4AGPL-RY2AGPL-DT4A
GM4, K300S G4L-PUEA/B
GM6 G6L-PUEA/B
CPU Master Module Remote I/O
GM3, K1000S G3L-DUEA GDL-D22AGDL-D24AGDL-TR2AGDL-TR4AGDL-RY2AGDL-DT4A
GM4, K300S G4L-DUEA
GM6 G6L-DUEA
LG PLC Interface
LG PLC9
LG Smart I/O
#1 Smart I/O #2 Smart I/O #3 Smart I/O
Profibus-DP (Max 12Mbps)
#N Smart I/O
Other PLC(Master)
Maker CPU (Master Module) Remote I/O
Siemens S7-315-2DP (built-in)S7-413-2DP (built-in)S7-300 (CP342-5)S7-400 (CP443-5), etc
GPL-D22AGPL-D24AGPL-TR2AGPL-TR4AGPL-RY2AGPL-DT4A
Mitsuishi Q (QJ71PB92D)AnA/AnU (AJ71PB92D)AnS (A1SJ71PD92D)
Omron C200H/CS1(C200HW-PRM21), etc
Other PLCs available
#1 Smart I/O #2 Smart I/O #3 Smart I/O
DeviceNet (Max 500kbps)
#N Smart I/O
Maker CPU (Master Module) Remote I/O
Rockwell SLC500 (1747-SDN/B)ControlLogix (1756-DNB)
GDL-D22AGDL-D24AGDL-TR2AGDL-TR4AGDL-RY2AGDL-DT4A
Mitsuishi Q (QJ71DN91)AnA/AnU (AJ71DN91)AnS (A1SJ71DN91)
Omron C200H/CS1(C200HW-DRM21)CQM1 (CQM1-DRT21)
Other PLCs available
Other PLC(Master)
Interface with other PLCs
LG PLC10
LG Smart I/O
#1 Smart I/O #2 Smart I/O #3 Smart I/O
Modbus (RS-422, Max 38.4kbps)
#N Smart I/O
Maker CPU (Master Module) Remote I/O
Schneider Modicon SeriesTelemechanic SeriesSquae D Series
GSL-D22AGSL-D24AGSL-TR2AGSL-TR4AGSL-RY2AGSL-DT4A
Mitsuishi AnA/AnU (AJ71UC24-S2)AnS (A1SJ71UC24-S2)
Other PLCs available
Other PLC(Master)
Interface with other PLCs
LG PLC11
LG Smart I/O
#1 Smart I/O #3 Smart I/O #N Smart I/O
Maker PC Board Remote I/O
- General RS-422 Board GSL-D22AGSL-D24AGSL-TR2AGSL-TR4AGSL-RY2AGSL-DT4A
Others available
#2 Smart I/O
Modbus (RS-422, Max 38.4kbps)
PCApplication
PC Interface
LG PLC12
LG Smart I/O
#1 Smart I/O #3 Smart I/O
Profibus-DP (Max 12Mbps)
#N Smart I/O
Maker PC Board Remote I/O
Siemens CP5614 FO PCI GPL-D22AGPL-D24AGPL-TR2AGPL-TR4AGPL-RY2AGPL-DT4A
Softing Profi Board for PCI
ComSoft DF PROFI PCI
Others available
#1 Smart I/O #2 Smart I/O #3 Smart I/O
DeviceNet (Max 500kbps)
#N Smart I/O
Maker PC Board Remote I/O
Rockwell 1784-PCID (S) GDL-D22AGDL-D24AGDL-TR2AGDL-TR4AGDL-RY2AGDL-DT4A
Hilscher CIF50-DNM
Beckhoff FC5201
Others available
PCApplication
PCApplication
PC Interface
#2 Smart I/O
LG PLC13
LGIS (Smart I/O)
AB(Compact Block)
Mitsubishi Omron
Part Number G□L-D22A (16P)G□L-D24A (32P)
1791D-16B0 AJ65SBTB1-16DAJ65SBTB1-32D
DRT1-ID08(-1)DRT1-ID16(-1)
Point 16 / 32 16 16 / 32 8 / 16
Type Sink / Source Sink / Source Sink / Source Sink / Source
Rated Input DC 24V DC 24V DC 24V DC 24V
Rated Input Current 7mA 2~11mA 7mA 10mA
OperationVoltage
On More than 19V More than 10V More than 14V More than 15V
Off Under 6V Under 5V Under 6V Under 5V
ResponseTime
Off/On Under 3ms 1~32ms setting Under 1.5ms Under 3ms
On/Off Under 3ms 1~32ms setting Under 1.5ms Under 3ms
Connection Terminal block Terminal block Terminal block Terminal block
Common 16/com 8/com 16 or 32/com 8 or 16/com
Size 116 * 51 * 40 (16P)184 * 51 * 40 (32P)
148 * 48 * 38 118 * 50 * 40 (16P)179 * 50 * 40 (32P)
125 * 50 * 40 (8P)150 * 50 * 40 (16P)
SupportNetwork
DeviceNet ● ● × ●
Profibus ● × × ×
Modbus ● × × ×
CC-Link × × ● ×
Device comparison - DC input module
LG Smart I/O
LG PLC14
LGIS (Smart I/O)
AB(Compact Block)
Mitsubishi Omron
Part Number G□L-TR2A G□L-TR4A
1791D-0B16P AJ65SBTB1-16TAJ65SBTB1-32T
DRT1-OD08(-1)DRT1-OD16(-1)
Point 16 / 32 16 16 / 32 8 / 16
Type Sink Sink / Source Sink Sink
Rated Input DC 24V DC 12/24V DC 12/24V DC 12/24V
Rated Input Current 0.1A / 2A*1 0.5A / 4A 0.5A / 3.6A (16P)0.5A / 4.8A (32P)
0.3A
ResponseTime
Off/On Under 0.5ms Under 0.5ms Under 0.5ms -
On/Off Under 1ms Under 1ms Under 1.5ms -
Connection Terminal block Terminal block Terminal block Terminal block
Common 16/com 8/com 16 or 32/com 8 or 16/com
Size 116 * 51 * 40 (16P)184 * 51 * 40 (32P)
148 * 48 * 38 (16P) 118 * 50 * 40 (16P)179 * 50 * 40 (32P)
125 * 50 * 40 (8P)150 * 50 * 40 (16P)
SupportNetwork
DeviceNet ● ● × ●
Profibus ● × × ×
Modbus ● × × ×
CC-Link × × ● ×
LG Smart I/ODevice comparison – Tr Output module
*1 Support afterward: 0.5A/4A (May, 2003)
LG PLC15
LGIS (Smart I/O)
AB(Compact Block)
Mitsubishi Omron
Part Number G□L-RY2A - AJ65SBTB2-8R GT1-ROP16
Point 16 - 8 16
Type Relay - Relay Relay
Rated Input DC 24V/AC 240V - DC 12/240V DC 24V/AC 240V
Rated Input Current 2A / 5A - 2A / 4A 2A
ResponseTime
Off/On Under 10ms - Under 10ms Under 10ms
On/Off Under 10ms - Under 12ms Under 12ms
Connection Terminal block - Terminal block Terminal block
Common 8/com - 8/com 16/com
Size 184 * 51 * 40 - 118 * 50 * 40 160 * 60 * 50
SupportNetwork
DeviceNet ● - × ●
Profibus ● - × ×
Modbus ● - × ×
CC-Link × - ● ×
LG Smart I/ODevice comparison - Relay Output module
LG PLC16
LG PLC
LG Industrial Systems
APMAdvanced Position Module
LG PLC17
LGIS ASIC
LGIS ASIC-embedded processor for APM
3-axis linear/2-axis arc interpolation operation
Simultaneous/synchronous/separate operation
Parameter setting with mm, inch, degree, and pulse unit
Parameter, position data change by external device or program
Direct Start by external input signal (without program)3-axis APM module
APM (Advanced Position Module)
1. Features
LG PLC18
2. Specifications ( I )
APM (Advanced Position Module)
Output type Open Collector Differential
No. of axes 1, 2, 3
Positioning data 400step/axis
Unit mm, inch, degree, pulse
Pos. address range -2,147,483,648 ~ +2,147,483,647
Max. output pulseDifferential output: 1MppsOpen Collector output: 200kpps
Data back-up Flash memory
Origin point return Near-zero point dog, Z phase, upper/lower limit switch
Speed range 0.1 ~ 1200.00 / 6000.00 (mm/min)0.01 ~ 120.000 / 600.000 (inch/min)0.01 ~ 120.000 / 600.000 (degree/min) 1 ~ 200000 / 1000000 (pulse/s)
K300S (GM4)Item
K200S (GM6)
G4F-PP1 / 2 / 3O G4F-PP1 / 2 / 3D
G6F-PP1 / 2 / 3O G6F-PP1 / 2 / 3D
LG PLC19
2. Specifications ( II )
APM (Advanced Position Module)
Interpolation Max. 3-axis linear/2-axis arc interpolation
Control method Position, speed, position/speed, speed/position, PTP
Acc/Dec pattern Trapezoidal & S curve
Operation indication 17 segment indicator, LED
Connector 40-pin connector
I/O occupation point 32 point (MASTER-K series only)
Max. installation Without limit (main and extension base)
Ext. command signalJOG For/Rev Signal / Automatic Operation / Simultaneous Start / Emergency Stop /Speed Position Conversion
Acc/Dec time 4-type Acc/Dec pattern selection available
K300S (GM4)Item
K200S (GM6)
G4F-PP1 / 2 / 3O G4F-PP1 / 2 / 3D
G6F-PP1 / 2 / 3O G6F-PP1 / 2 / 3D K200S
LG PLC20
XY
Z
- 3-axis linear interpolation control moves an object to its corresponding point in space
3-axis linear interpolation
APM (Advanced Position Module)
LG PLC21
- 2-axis circular interpolation moves an object to its corresponding point on the circle
Y
X
End Point
Start Point (CW)
-Easy to manufacture Easy to manufacture an object like fan an object like fan shape, shape, oval, etcoval, etc
2-axis circular interpolation
APM (Advanced Position Module)
LG PLC22
- With one start command, each axis starts its operation simultaneously
Speed
Time
Time
Time
Time
Command
X
Y
Z
- 3-axis simultaneous pulse output- 3-axis simultaneous pulse output
3-axis simultaneous operation
APM (Advanced Position Module)
LG PLC23
- Axis synchronous selection by internal/external signal (Synchronous speed ratio)
- Application to its subordinate - Application to its subordinate axis for the main axis speed ratioaxis for the main axis speed ratio
Time
Time
Speed
Main Axis
Sub Axis
Synchronous operation (by Speed)
APM (Advanced Position Module)
LG PLC24
- Axis synchronous selection by internal/external signal (Synchronous start by the absolute position of the main axis)
Time
Time
Speed
Main axis
Sub axis
Absolute position of main axis
- Synchronous start of the subordinate axis - Synchronous start of the subordinate axis by the current position of the main axisby the current position of the main axis
Synchronous operation (by Position)
APM (Advanced Position Module)
LG PLC25
- Speed change during position operation available by Speed Override command
Time
Speed
1st 2nd 3rd
- Temporary operation - Temporary operation speed change availablespeed change available
Position Speed Override
APM (Advanced Position Module)
LG PLC26
Time
Speed
Goal position before change
Goal position after change
- Position Override to the changed position during position operation
- Temporary goal position - Temporary goal position change available during change available during position operationposition operation
Position Override
APM (Advanced Position Module)
LG PLC27
- Trapezoidal & S-curve Acceleration/Deceleration (automatic detection of deceleration point)
Time
Speed
Trapezoidal Acc/Dec
S-curve Acc/Dec
-Smooth Motor Control (Acc/Dec)
Acceleration / Deceleration Profile
APM (Advanced Position Module)
LG PLC28
APM (Advanced Position Module)
-Fast control and Easy use thanks to External Start
JOG Forward/Reverse JOG Forward/Reverse Separate StartSeparate Start Simultaneous StartSimultaneous Start Emergency Stop Emergency Stop ZONE 1 / 2 / 3 OutputZONE 1 / 2 / 3 Output
Internal Start (Function Block) Internal Start (Function Block) Delay time = D/I filtering + Program Scan time + FB processing + function processing time (Start delay time occurrence: scores of ms) External Start (Terminal Input)External Start (Terminal Input) Delay time = function processing time (Start delay time occurrence: scores of s)
External Start
Signal Delay Element External Signal Types
LG PLC29
- Operation features and information setting in a parameter format
WINDOWS-based software APM modules support Powerful parameter editing function (copy, move, undo, redo, etc)
Various monitoring information supply (operation method of each axis, etc) Profile tracking and operation monitoring available
Profile graph and circular interpolation simulation available Available to edit operation parameter data in EXCEL
3. APM Software Package
APM (Advanced Position Module)
LG PLC30
APM (Advanced Position Module)
- Sets basic operation features and limit value setting for each axis
Operation Parameter
LG PLC31
APM (Advanced Position Module)
- Defines separate operation method of each axis, Sub Address, Speed, etc.
Operation Data
LG PLC32
APM (Advanced Position Module)
- Monitors basic operation features and operation status of each axis.
Monitoring (On-line)
LG PLC33
APM (Advanced Position Module)
- Supports real-time monitoring of operation speed change for time axis and saving the tracking screen as a file
Profile Tracking (On-line)
LG PLC34
APM (Advanced Position Module)
- Supports virtual operation speed monitoring for each axis and saving its result as a picture file
Profile Simulation (Off-line)
LG PLC35
APM (Advanced Position Module)
- Able to check in advance for the moving trace after position operation with parameter settings when you use circular interpolation function
Circular Interpolation Simulation (Off-line)
LG PLC36
LG PLC
LG Industrial Systems
New HSC(High Speed Counter)
LG PLC37
New HSC (High Speed Counter)
1. Main Features
4 types for K300S (GM4) / K200S (GM6)
Separate 2 channels
Improved pulse input speed (200Kpps / 500Kpps)
Broad counting range (32 bits)
7 functions like comparison, Tr output, etc
Various additional functions
LG PLC38
New HSC (High Speed Counter)
Specifications
Item
Signal Type
Counting Speed
Additional Function
G6F-HO1A G6F-HD1A
Open Collector Line Driver
Max. 200kHz Max. 500kHZ
Counting Range -2,147,483,648 ~ + 2,147,483,647
Multipli-cation
1-phase input
2-phase input
1 / 2 multiplication
1 / 2 / 4 multiplication
Tr. Output OUT 1 / 2 / 3
Counter Clear / Counter Latch / Interval CounterInput period measurement / Counter per Timebase
G4F-HO1A G4F-HD1AK300S (GM4)
K200S (GM6)
LG PLC39
New HSC (High Speed Counter)
Counter Clear
- Changes current value to “0”
- Additional function mode ( 1 )
- Additional function EN
500
900
500
1000
LG PLC40
New HSC (High Speed Counter)
Counter Latch
- Latches current value
- Additional function mode (2)
- Additional function EN
CV: 500
CV: 800500
800
500
1000
LG PLC41
New HSC (High Speed Counter)
Interval Counter
- Monitors the counter value during the interval to count
- Additional function mode (3)
- Additional function EN
500700 750
9501000Pulse Input
Counter Value1000
500
500
200 200
Setting Time
LG PLC42
New HSC (High Speed Counter)
Input Period Measurement
-Measures the input pulse every one second or during user-defined period of time
- Additional -function mode ( 4 / 5)
- Additional function EN
500
950 10001000Pulse Input
Clocks per sec.
500250
300200
850
mode 4: 1 secmode 5: user-defined period of time* Period *
Period:
LG PLC43
LG PLC
LG Industrial Systems
PMU(Programmable Monitoring Unit)
LG PLC44
PMU x30 SeriesPMU x30 Series
PMU Lineup
PMU-3305.7”
PMU-530 7.5”
PMU-73010.4”
PMU-330ST
PMU-330BT
PMU-330TT
PMU-530ST
PMU-730TT PMU-730ST
PMU-83012.1”
PMU-830TT
LG PLC45
PMU x30 Series
PMU-530ST
PMU-330TT
• 320 x 240 dot, 5.5”/5.7”• 32 bit RISC CPU• Display Element 256 Color TFT (PMU330TT) 256 Color STN (PMU330ST) Blue & White STN (PMU330BT)• Matrix touch-key: 16x12/screen• Various bitmap functions bitmap touch/lamp, background bitmap• O/S downloading for version upgrade• Flash Memory (screen: 1MB/2MB)• Internal 256K SRAM (data logging/recipe)• RS-232C/422 comm. port • Waterproof (IP65F)• Size: 206 x 136 x 64 (Panel cut: 198 x 128)• Power: 21 ~ 28V DC
PMU-330STPMU-330BT
• 640 x 480 dot, 7.5”• 32 bit RISC CPU• 256 Color STN • Analog touch-key: 640x480• Various bitmap functions bitmap touch/lamp, background bitmap• O/S downloading for version upgrade• Flash Memory (screen: 2MB)• Internal 256B SRAM (data logging/recipe) • RS-232C/422 comm. port• Waterproof (IP65F)• Size: 240 x 170 x 62 (Panel cut: 231 x 161)• Power: 21 ~ 28V DC
PMU-330PMU-330 PMU-530PMU-530
LG PLC46
PMU-x30 Series
PMU-730TTPMU-730ST
PMU-830TT
• 640 x 480 dot, 10.4”• 32 bit RISC CPU• Display Element 256 Color TFT (PMU 730TT) 256 Color STN (PMU 730ST) • Matrix touch-key: 32 x 24/screen• Various bitmap functions bitmap touch/lamp, background bitmap• O/S downloading for version upgrade• Flash Memory (screen: 2MB/4MB)• Internal 256K SRAM (data logging/recipe) • RS-232C/422 comm. & printer port• Waterproof (IP65F)• Size: 305 x 239 x 55 (Panel cut: 294 x 228)• Power: 85 ~ 265V AC (Free)
• 800 x 600 dot, 12.1”• 32 bit RISC CPU• 256 Color TFT• Analog touch-key: 800x600• Various bitmap functions bitmap touch/lamp, background bitmap• O/S downloading for version upgrade• Flash Memory (screen: 4MB)• Internal 256K SRAM (data logging/recipe)• RS-232C/422 comm. & printer port• Waterproof (IP65F) • Size: 305 x 239 x 55 (Panel cut: 294 x 228)• Power: 85~265V AC (Free)
PMU 730PMU 730 PMU 830PMU 830
LG PLC47
Numeric & String Display
Numeric data display: DEC, HEX, BCD type
Displays data with 8 different colours depending on the numeric range variance
Data from PLC or controller can be displayed after calculation
ASCII CODE, read from PLC or controller, can be displayed with characters
LG PLC48
Data Setting & Clock Display
Min/max value of data setting & input range limit available
Data input using TENKEY
PASSWORD encrypted
★★ Key display tag
RTC data display (year, month, date, hour, minute, second) using RTC element embedded in PMU
★★ Clock Display
LG PLC49
Touch Function
Bitmap touch:
Displays different bitmaps according to the device status (ON/OFF) after Touch button operation
Caption:
Displays 2 letters according to the device status (ON/OFF) after Touch button operation
★★ TOUCH Input function: commands PLC touching a specific region on screen
Maximum 10 functions can be set up with one Touch tag
Touch colour:
Lamp function embedded in Touch button displays the devices status (ON/OFF) after Touch button operation
LG PLC50
Lamp Function
Bitmap lamp:
Displays different bitmaps according to the device status (ON/OFF)
★★ LAMP Tag: displays ON/OFF information of a bit in colour/picture
Data lamp:
Displays lamp with 8 colours according to data range
Caption function:
Displays different letters according to the device status (ON/OFF)
LG PLC51
Graph
TREND graph
- Input value change is visually shown with the time axis
- 10 data can be set up with one graph
- Logging data and recipe data trend available
Meter graph
- Sets the lowest/highest value of data and displays current data in rate
- Analog data (voltage, current) display
Others – bar graph, X/Y chart
LG PLC52
Recipe (parameter moving)
Running data of each work are stored in PMU and when work changes, they are batch-transferred to the controller
Easy to operate: converts the setup data into EXCEL format
LG PLC53
Data Logging
Condition setting Operation setting
DATA LOGGING screen
Data generated during operation are stored in PMU through periodic or conditional data logging
Convenient to report: converts logging data into an EXCEL report
LG PLC54
Various Bitmap Functions
Background bitmap function:
Uses a background bitmap of the same screen resolution
Transparent bitmap and lettering functions:
Does not display the unnecessary part of bitmap and background letters
No limit in size:
Available to register regardless of bitmap size(only to be smaller than screen size)
Image Character:
All fonts available as long as WINDOWS support
LG PLC55
Simulation Functions
RS-232C
Simulates the status of each device's address operation and communication while disconnected with PLC.
Monitors data when you turn on each address or input data.
Simulation on drawing:
If the status of a bit tag (ON/OFF) changes while drawing the screen, the screen changes can be displayed on PC monitor
LG PLC56
Convenient Memory Management
Overall display of PLC address registered in the screen
Overall change available in PLC address change
Display of PLC address of tags registered in the screen
Overall display of the contents of screen
User-defined library registration
LG PLC57
RS-232C15m MAX.
RS-422/485500m MAX
1:1 Serial Communication One PLC connection to one PMU
PMU Communication
1:N Communication Connecting more than one PLCs to one PMU through RS-422/485 communication
•1:N communication by using RS-422/485 should be organised as choosing identical PLC types
LG PLC58
PMU Communication
Fnet 64 stations, 750m MAX.
MASTER-KGLOFA-GM(Gㅁ L-FUEA)
Enet option module installed in PMU
N:1, N:M (N+M ≤ 64) Communication Using MASTER-K/GLOFA-GM Fnet module
LG PLC59
PMU Communication
Controls two different PLCs using one PMU
Main comm. Ch.RS-232C/422/485
PLC Communication with other devices
2nd comm. Ch.RS-232C
LG PLC60
Applicable Equipments
PMU Option Maker Type Model name Loader LinkPMU830PMU730PMU530PMU330PMU710PMU320
Built-in Serial comm.
LGIS PLC MASTER-K O O
GLOFA-GM O O
GOLDSEC-M O O
STARCON-MF - O
Inverter iG5 RS-485
iS5 RS-485 option board
iH RS-485 option board
Samsung PLC SPC O -
FARA-N O O
FARA-N70/700+ O -
Mitsubishi PLC MELSEC-A, QnA, Q O O
MELSEC-FX O O
Fuji PLC MICREX-F - O
Omron PLC SYSMAC-C, CS1 - O
Siemens PLC 3964R - O
S7-300/400 MPI O -
S7-200 PPI O -
LG PLC61
Applicable Equipments
Under developmentEthernet PMUㅁㅁㅁ -E
Gㅁ L-FUEAGLOFA-GM
-OMP-920
-OProgic-8PLCYaskawa
-OPLC-5
-OSLC500[5/03,04]PLCABBuilt-in serial comm.
PMU830PMU730PMU530PMU330PMU710PMU320
O-DL-205/305/405PLCKoyo
OOCymonPLCKDT
ModbusPLCModicon
-OCP-9200SH
O-DVP-ESPLCDelta
O-FA-M3PLCYokokawa
O-POSFA phld-1a/2aPLCPOSCON
-O90-30[SNP-X]PLCGE Fanuc
Gㅁ L-FUEAMASTER-KPLCLGISPMUㅁㅁㅁ -F
CC LinkPMUㅁㅁㅁ -C
LinkLoaderModel nameTypeMakerOptionPMU
LG PLC62
LG PLCGM4-CPUB/CFast Ethernet
MASTER-K120S
LG Industrial Systems
LG PLC63
New Product (GM4 – CPU B/C)
GMR GM1/2 GM3 GM4C GM4/4B GM6 GM7
I/OCapacity
Direct 7680 16000/4096
2048 3584 2048 384 10~80
Remote 32000 32000/16000
4096 32000 2048/8192
512 -
Speed (㎲ /Step) 0.12 0.12 0.2 0.12 0.2 0.5 0.5
Program Capacity 2MB/512K
512KB 256KB 1MB 128KB 68KB 68KB
Data Capacity(KB) 512KB 512KB 128KB 428KB 64KB 32KB 32KB
Flash Memory Option Option Option 6M 512KB 128KB Option
Base No. of Extension
15 31 3 6 3 × 3
Distance 100m 100m 3m 15m 3m × -
Floating ○ ○ X ○ X X X
Built-in Cnet × × × × × ○ ○
Loader Conn.
RS-232C ○ ○ ○ ○ ○ ○ ○
USB × × × ○ × × ×
1. GLOFA CPU
LG PLC64
New Product (GM4 – CPU B/C)
2. Down Sizing & High Lebel Functions
GM2 Function is moved to GM4
GM4C GM4B GM4
I/O Direct 3584 2048 2048
Remote 32000 8192 2048
Proce Speed 0.12 0.2 0.2
Floating Process O X X
Program Capacity 1MB 128KB 128KB
Data Capacity 428KB 26KB 26KB
Flash Memory 6MB 512KB ×
Base No. of Extension 6 3 3
Extension Distance 15m 3m 3m
LG PLC65
3. Network Module
GM4C GM4B GM4
High Speed Link NetworkModule
Ethernet Total 4 Total 4 Total 2
Fnet/Rnet
Profibus
Devicenet
Position of Network Module Basic/Extension Basic/Extension Basic Base
4. High Speed Loader Port (USB / High Speed Serial Port )
GM4C GM4B GM4
LoaderPort
USB 12Mbps × ×
RS-232C 115.2Kbps 115.2Kbps 38.4Kbps
High Speed Downloading via USB Port
New Product (GM4 – CPU B/C)
LG PLC66
5. Bases and Extension Cables
New Product (GM4 – CPU B/C)
Basic Base
Ext. Base
Ext. Cable
CPU Efficiency Base Efficiency Function
New NewNew - Full Upgrade - High Speed, 6 Exts. - Support Full functions of GM4-CPUC System
Old - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM4-CPUC (CPU Only)
New OldNew - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM4-CPUC (CPU Only)
Old - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM4-CPUC (CPU Only)
Old OldNew - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM4-CPUC (CPU Only)
Old - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM4-CPUC (CPU Only)
Old NewNew - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM4-CPUC (CPU Only)
Old - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM4-CPUC (CPU Only)
-To realize the Full functions of GM4-CPUC, New type Bases, Extension Cables are required.- Old type Bases or Extension Cables are used, the function of only CPU will be upgraded.
Basic Base Extension Base
4 Modules GM4-B4MH GM4-B4EH
6 Modules GM4-B6MH GM4-B6EH
8 Modules GM4-B8MH GM4-B8EH
Name Length Name Length
G4C-E061 0.6m G4C-E102 10m
G4C-E601 6m G4C-E152 15m
- Names of New type Bases and Extension Cables
LG PLC67
100/10Mbps Fast Ethernet for Industrial systems. 100BaseT, 100BaseF(Fiber Optic), 10BaseT, 10BaseF(Fiber Optic) Support 2 type Ethernet - Open Type(Information Level) Ethernet and Dedicated (Between LG PLCs) Ethernet Support Internet Service - Mail Server (POP3, SNMP) - Web Server (Next version) Realized High Reliance and functions using 32Bit Processor. Keep the functions of old version Ethernet (GMWin Service, Frame Editor etc.)
1. Fast Ethernet
100BaseF (Fiber Optic)
100BaseT (TP)
MAU
Server
HMI PC
HMI PC
HUB
HUB
MAU
100BaseT (TP)
New-Product (Fast Ethernet)
LG PLC68
General Specifications
Fast Ethernet(Open)
Fast Ethernet(Dedicated)
Ethernet
Baud Rate 100/10Mbps 100/10Mbps 10Mbps
Media 100BaseT/F(Fiber)10Base5/T/F(Fiber)
100BaseT/F(Fiber)10Base5/T/F(Fiber)
10Base5/2/T
Processor 32Bit RISC Processor 16Bit Processor
Protocol TCP/IP, UDP/IP Token Passing TCP/IP, UDP/IP
Data Capacity 200word / Block (Max 64Block), 1446Byte / Frame
No. of Channel 16Ch
Dedicated Service ● × ●
FB Service ● ● ●High Speed Link Service ● ● ●
E-Mail Service ● × ×
Usage Communication between PC(MMI) and LG PLCs
Communication between LG PLCs
Communication between PC(MMI) and LG PLCs
New-Product (Fast Ethernet)2. Specifications
LG PLC69
New-Product (MASTER-K120S)
√ Main UnitAC Power(85~264V), IO Points : 60 Points (DC24V Input 36Points, Relay Output 24Points)Total 120Points Extension is Possible(3 Modules can be connected to 1 main base)Enlarge P area for Remote control(P000 ~ P63F)
√ Hign Speed Processing (Speed enlarged 2 times than MK80S )Basic Sequence : 0.1 ~ 0.9us / instructionApplication function : some us ~ 10s of us /instruction Special Module Processing : 100s of us ~ 1ms /Module
√ Various Extension module10 Points I/O, (DC/Relay), 20 Points I/O(DC/Relay), 10 Points Output (TR)
Hybride Analog I/O (A/D 2Ch,D/A 1Ch), AI(A/D 4Ch), AO (D/A 4Ch, Current Output) Analog Timer(4Ch), RTC Pack, Memory Pack(G7M-256B, for Back-up the program)
RS-422 Module, RS-232C Module(Modem), FNET, RNET (Master), PNET , DNET (Slave)
√ Battery-less Back-upProgram Back-up : EEPROM (EEPROM Back-up when Edit on Run) *AutomaticallyData Back-up : Super Capacitor(Over than 2000h in )
1. Characteristic of MASTER-K120S
LG PLC70
√ Enlarging No. of Communication ch. And Functions.Built-in RS-232C / RS-485 2Ch(Simultaneous Use is available)Supports User-defined Protocol and Monitoring protocol with KGLWIN
√ Add Built-in PID FunctionsRelay/PRC Auto-tuning / PWM Output
Position/Velocity calculation type / Prevention overcrowding Differential Calculation
√ Input Processing FunctionsInput Filtering Function : Set Filtering time (1 ~ 15ms)Pulse Catch Function : 10us(P0,P1), 50us(P2~P7)External Interrupt Function : 10us(P0,P1), 50us(P2~P7)
√ Position Control FunctionNumber of Ch. : 2 Ch(100Kpps)
Operating Mode : Single, Repeat, Automatic, Continuous, Uniform Velocity Operating
Additional Function : Return to Origin, Jog Operating, PWM Output
√ Built-in High Speed Counter (32bit signed processing)1Phase : 100khz 2ch, 20khz 2ch(Total 4Ch)
2Phase : 50Khz 1ch, 10Khz 1Ch (Total 2Ch)
Additional Function : Ring counter, Value Compare / Band compare,
Compare value agreement Interrupt, RPM Function
New-Product (MASTER-K120S)