Lexium SD2 and Lexium SD3 Stepper Drives and Motors

-Lexium SD2 - two-phase range up to 9.2 Nm-Lexium SD3 - three-phase range up to 19.7 Nm

Schneider Electric – Global Marketing – CGD – April 2011 2

High-precision motion control

Schneider Electric – Global Marketing – CGD – April 2011 3

A compact drive combined with a stepper motor

Lexium stepper drives and motors:

Performance and Efficiency• Excellent speed stability, designed for applications such as scanning,

pick & place, etc.• High torque at low rotation speeds: the stepper motor is particularly suitable for

positioning over short distances (labelling).• High holding torque: optimum solution for material handling applications.

Schneider Electric – Global Marketing – CGD – April 2011 4

Higher precision and efficiency

Schneider Electric – Global Marketing – CGD – April 2011 5

Precise positionning and improved motor efficiency

• High precision of positioning over short distances• High-precision positioning (0.036° to 1.8°)• No vibration when the step is activated• Withstands significant variations in the load• Synchronised positioning via CANmotion (on the Lexium SD3 28A) • A wide range of motors (torque from 0.07 to 16.5 Nm) to meet your installation

requirements

• Better motor efficiency for your installations • With Lexium stepper drives and motor sinusoidal switching operation is free

of any resonance

Schneider Electric – Global Marketing – CGD – April 2011 6

Simplicity of use and time savings

• “Plug & Play”: Just plug in and set the step resolution:• Application ready to use • Encoderless control• Instant start-up without a software interface• High torque avoiding the need to use a gearbox in the majority of applications• Easy configuration: customisable menu• Automatic current reduction

Schneider Electric – Global Marketing – CGD – April 2011 7

Enhanced communication and ease of integration

• Enhanced communication• Different types of links possible

with control products• Very easy to mount: less wiring,

easily integrated in an enclosure, etc.

01: SoMachine software02: Modicon M258 controller03: Magellis Human-Machine Interface04: Altivar 32 variable speed drives05: Lexium SD3 28 stepper drive06: Lexium 32 servo drive07: Asynchronous or synchronous motors08: Lexium BRS3 stepper motor09: Lexium Ilx integrated drive10: Lexium BMH servo motors11: Modicon remote I/O12: Osisense electronic sensors

Schneider Electric – Global Marketing – CGD – April 2011 8

2 ranges to meet your installation requirements

Schneider Electric – Global Marketing – CGD – April 2011 9

Lexium SD2: a 2-phase range for small machines

• Types of machines• Small labelling machine• Medical and laboratory machines• Electronic card assembly machines• Spinning machines, etc.

• Numerous communication interfaces for programming or control:• RS 485, CANopen, Pulse/Direction

• Motor compatibility:• Compatible with the Lexium BRS2 range of two-phase stepper motors (up to

9.2 Nm)

Schneider Electric – Global Marketing – CGD – April 2011 10

Lexium SD3: a 3-phase range for higher power machines• A rugged range for:

• Printing machines• Material handling machines• Milling machines, turning machines, etc.• Scanners• Packaging machines, etc....

• More openness to networks: • CANopen, Modbus, PROFIBUS DP and CANmotion (on Lexium SD3 28)

• Integrated EMC filter• to protect the installation and generate savings

• Motor compatibility:• Compatible with the Lexium BRS3 range of three-phase stepper motors (up to

19.7 Nm)• Greater safety with «Safe Torque Off» function

• Integrated in the Lexium SD3 28, • Optional on the other products of the range

Schneider Electric – Global Marketing – CGD – April 2011 11

A complete range of stepper drives & motors

●2 ranges: 2 & 3-phase●For applications requiring high

precision & positioning:● scanning

● pick & place

● labelling

● printing

● material handling,

● Etc.

●Plug & Play●Improve motor efficiency

Lexium SD2 Lexium SD3

Schneider Electric – Global Marketing – CGD – April 2011 12

Thank you !