EMERGENCY LUMINAIREIP66 WITH LED TUBE LAMPS

MODELS LETV

Rua Arara Azul, Lote 07, Quadra 75, s/n - Novo Horizonte – Serra, ES, Brasil - CEP: 29163-306 - Telefax: (27) 3338-1545CNPJ: 31.494.990/0001-95 - INSC. EST. 081.238.68-1 URL: - Email: http://www.vilux.com.br vilux@vilux.com.br

Technical specifications

A

B

C

Nominal voltage 100Vac - 240Vac

Nominal frequency 50HZ - 60HZ

Temperature color 6000K - 6500K

Power factor 0,92

Working temperature range -37°C to 50°C*

Battery lead acid (12Vcc 7,2Ah)

Led indication Electricity grid Vac (red)/ charge (yellow)/ fluctuation (green)

Mechanical impact resistance IK10

Light fitting protection IP66

Body material Grey Polycarbonate (Self-extinguishable and UV stable)

Diffuser material Transparent Polycarbonate (Self-extinguishable and UV stable)

Reflector material steel sheet, white colour (RAL 9003)

Clips material Polyamide + 15 % glass fi bre or stainless steel + polyamide

Sealing Polyurethane (PUR), foamed body groove

Light switching < 1 second (after the voltage outage has been detected)

Maximum total charge time < 24 hours

Minimal luminous flux (after the voltage outage) 95% of initial flux after 90 minutes

Durability of LEDs 50000 hours

Warranty 2 years

*the durability of the LED decreases with increasing working temperature.

Model Power Luminious Weight Autonomy A B C

LETV04 2 x 10 W 1800 lm 3,995 Kg 4 Hours 145 662 111

LETV05 2 x 14 W 3400 lm 4,968 Kg 2,7 Hours 145 1272 111

Dimention (mm)

The light fitting is suitable for industrial outdoor and indoor roofed

spaces, sports areas, workshops, garages, transport terminals,

warehouses, utility structures and laboratories without a danger of

explosion of gases, dust and combustible fumes.

The light fitting is resistant to dust, moisture and spouting water.

The body and the diffuser made of polycarbonate (PC) have the

increased resistance against deformation and impact.