Silver Tarnish: A Redox Reaction Made by Dirk, Jane, Lois, Fox, Liz.
Legor Group USA info [email protected] … · • brazing, soldering • welding • electroplating &...
Transcript of Legor Group USA info [email protected] … · • brazing, soldering • welding • electroplating &...
L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423
TECHNICAL CONSULTING SERVICES
• LOST WAX CASTING, GRAINING & ALLOYING INVESTMENT, WAXES, MOLDS, SPRUING & TREE CONFIGURATIONS
• MASS FINISHING & HAND FINISHING
• BRAZING, SOLDERING
• WELDING
• ELECTROPLATING & TARNISH PROTECTION
• WASTE CONTROL
• EQUIPMENT & MATERIALS MANAGEMENT
• HANDS-ON PROCESS & TECHNIQUE TRAINING
Technical Consulting Services make you more profitable.Our technical consultants have a wealth of knowledge in the jewelry industry - over 70 years combined! We are making that expertise available to you and to make your processes, products and business even more successful.We understand that every manufacturing operation is unique and faces it’s own set of challenges. Our technical consulting services are customizable to your specific needs.For a minimal investment, our jewelry industry expert(s) will travel to your location to evaluate and streamline your existing processes.
INVESTMENT POWDER
4120400CASTER’S BLEND INVESTMENT POWDER44 LB BOX
4120402CASTER’S BLEND INVESTMENT POWDER10.5 LB BAG
4120404PREMIUM BLEND INVESTMENT POWDER44 LB BOX
4120406PREMIUM BLEND INVESTMENT POWDER10.5 LB BAG
FOV Premium Blend Investment PowderFeatures:• Unique formulation designed for higher
temperature alloys such as palladium white gold.
FOV Caster’s Blend Investment PowderFeatures:• Perfect for brass, bronze, silver and gold casting• Very fine surface for precise pattern duplication• Extended work time of up to 13 minutes• highly repeatable results• Wider range of water to powder mixing ratios• Easy and clean breakout in quenching• Consistent results when casting with vacuum or
centrifugal equipment
L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423
POLISHING COMPOUND
LUXI Polishing Compound - Low Speed (under 1,000 rpm), Low-TemperaturePurple Features:• Ideal for use with bristle brush wheels to polish intricate surfaces• Use with all jewelry alloys for surface scratch removal
Green Features:• Perfect for polishing platinum and titanium without creating an 'orange
peel' effect• Great choice for hand-polishing using a rotary tool with felt tips for
intricate surfaces• Use with a muslin buff for scratch removal (compares to 240 grit
sandpaper) or with a loose-fold flannel buff for a high-luster finish
4502814LUXI GREEN
LUXI Polishing Compound - Platinum and Stainless Steel - All Run at 3,450 rpmBlack Features:• For removing material in first-stage finishing tasks, starting even
before 180-grit sandpaper • Used on lap wheels or sisal buffs (best results using 150mm; ideal
for extra scratch removal from platinum for initial deep-scratch removal
Gray Features:• First stage scratch removal directly after 180 grit sandpaper. • Use with a 6" tight weave muslin buff
Fine Pink Features:• Used for the final polish with a non-treated muslin or felt stitched buffs
LUXI Polishing Compound - Gold, Silver, Bronze, Brass & other Standard Alloys - All Run at 3,450 rpmYellow Features:• Aggressive material and should be used following 240-320 grit
sandpaper and can also be used on polymers• Use with a treated or tight-weave muslin buff
Blue Features:• Use for scratch removal and final luster in one process • Use with un-stiched muslin or flannel buffs
Super-Fine White Features:• For final polish for most precious metals with an un-stiched muslin or
flannel buff
Red Features:• Use any time you would use traditional red rouge. It is ideal for final
polishing using a 6" loose-fold buff
Orange Features:• Use for a top-quality final high-luster, ideal for producing bright and
clean coloring of both gold and silver • Use with a 6" loose-fold buff
4502818LUXI PURPLE
4502816LUXI BLACK
4502810LUXI GRAY
4502804LUXI FINE PINK
4502806LUXI YELLOW
4502802LUXI BLUE
4502800LUXI SUPER-WHITE
4502808LUXI RED
4502812LUXI ORANGE
LUXI Polishing CompoundSilica-free polishing compound, composed of an alumina oxide abrasive in a water-soluble binder. This compound is safe, easy to clean up and produces an amazing finished.
L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423
GRINDING WHEELS
FOV Deburring Wheels / 7SFINFeatures:• Water resistant - can be used wet, dry or with oil• Formulated to resist smearing - yielding high quality &
consistent finishing• Non-metallic formulation - non-contaminating• Conformable and flexible - durable, versatile with excellent
cut rates• 1” hole with tapered spindle hole adapterApplication: ideal for light stock removal, casting clean-up, light spru removal & bright, consistent scratch pattern. Optimum grain and resin formulation offer durability and versatility at an exceptional cost
45387006” X 1” X 1”GRIT 7SFIN
45387026” X 1/2” X 1”GRIT 7SFIN
45387044” X 1” X 1”GRIT 7SFIN
FOV Blending & Polishing WheelsFeatures:• New-age construction - providing extra long life• Smear resistant - providing consistent finishes• Uniform blending and scratch pattern• 1” hole with tapered spindle hole adapterApplication: the mixture of minerals and resin are designed to remove deeper scratches while providing a consistent pre-polish finish. Multiple grades provide significant time saving during the pre-polish steps and reduce buff and polish time.
45387104” X 1” X 1”GRIT 280 - PURPLE
45387124” X 1” X 1”GRIT 400 - GREEN
45387144” X 1” X 1”GRIT 800 - GRAY
FOV PC Flap WheelsFeatures:• Unique flap construction helps save time with prep
finishing and cutting• Even mineral distribution providing a consistent and
uniform cut rate• Water resistant for cool running, finer finish• 1” hole with tapered spindle hole adapterApplication: designed to deliver a uniform cut rate while reducing operator fatigue. They wear away continually, exposing new mineral, providing a controlled stock removal and finish. Ideal for preparing metal for plating, blending out parting lines and removing defects. The range of grades provide coarse to fine cut rates and finish requirements.
45387205” X 1” X 1”GRIT 280 - BROWN
45387225” X 1” X 1”GRIT 400 - PURPLE
45387245” X 1” X 1”GRIT 800 - GREEN
45387265” X 1” X 1”GRIT 1000 - GRAY
L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423
ULTRASONIC CLEANERS
3.5Qt & 2Qt Super Finish Ultrasonic CleanersFeatures:• 37KHZ ultrasonic wavelength transducer,
ideal for deep cleaning jewelry; removing caked-on dirt, rouge and other polishing compounds
• Upgraded typical weak points;- waterproof heavy-duty ON/OFF switch- fiberglass in between the transducers
and tank- protected internal circuit board from
condensation damage• Arbe Machine Mfg., Inc. 1 year warranty
3.5Qt Specifications:• Machine Size: 7”L X 10”W X 10”H• Tank Size: 9.5”L X 5.5”W X 4”D• Transducer: 100W/37KHZ (Langevin Type)• Timer: 0-30 Minute• Heater: 0-90º Celsius Adjustable• Capacity: 3.5Qt / 3.3L / 0.75 Gal
2Qt Specifications: • Machine Size: 7”L X 7”W X 10”H• Tank Size: 6”L X 5.5”W X 4”D• Transducer: 50W/37KHZ (Langevin Type)• Timer: 0-30 Minute• Heater: Auto ON/OFF - 65º Celsius• Capacity: 2Qt / 1.8L / 0.5 Gal
KUC-3Q3.5QT ULTRASONIC
KUC-2Q2QT ULTRASONIC
L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423
ELECTROPLATING SYSTEMS
5L 5 Liter Systems
110 Volt Electroplating Systems - 2 Liter & 5 LiterFeatures:• Stainless steel anode bars for treatment tank,
(anodes not included)• Tanks are removable for changing and
cleaning and supported on safety catch tray• Each treatment tank is equipped with;
• Immersion quartz heater with feedback thermocouple
• Variable speed agitation• Polypropylene construction for
- Corrosion resistance- Lightweight
• All components accessible for replacement or repair
• Unmatched plating as the distance between the anodes and parts remain consistent run-to-run
5L System Option: • Stainless steel heater available for a
degreasing bath
2L 2 Liter Systems
30071716 STATION UNIT;3 - 2L TREATMENT &3 - 2L RINSE TANKS24” X 16.5” X 13.5”
30071703 STATION UNIT;1 5L TREATMENT &2 5L RINSE TANK31” X 14” X 14”
30071682 STATION UNIT;1 5L TREATMENT &1 5L RINSE TANK18.5” X 14” X 14”
30071692 STATION UNIT;2 - 5L RINSE18.5” X 14” X 14”
L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423
RECTIFIERS
Digital Volteq® Plating RectifiersFeatures:• Power: 110/220 volts (dual); 50-60Hz• Easy-to-read integrated LED digital readout• Coarse & fine voltage output control• Separate dials for voltage & amperage• Includes lead wires• One-year manufacturer’s warranty
ARBE Pro-Plater RectifierFeatures:• Power: 110 volts; 60Hz; 25 amp• 0-25 amp output, continuous duty• Analog control• Oversized heat sinks and built in cooling fan• High quality insulated lead and clamp set
30071775-AMP PLATING RECTIFIER5 1/4”W X 11 1/2”D X 6 1/4”HAPPLICATION:GENERAL PURPOSE
300717620-AMP PLATING RECTIFIER5 1/4”W X 11 1/2”D X 6 1/4”HAPPLICATION:IDEAL FOR E-COAT
300717520-AMP PLATING RECTIFIER10”W X 12”D X 6”HAPPLICATION:ELECTRO-CLEANING & LARGER PLATING SYSTEMS
300903425-AMP PLATING RECTIFIER9 1/2”W X 7 3/4”D X 6”HAPPLICATION:GENERAL PURPOSE
L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423
ANODES
Electrolytic Degreasing PowderFeatures: • Metallic surface activator prior to
electroplating• Alkaline base chemical for surface
preparation and cleaning• aka Electro-cleaner
Neutralizing Solution& SaltsFeatures: • 1L or 5L ready-to-use or 1Kg salt• Non-hazardous acidic salt for
neutralizing the degreasing solution that remains on the piece
• Prepares the metal surface for the plating process
PRE-TREATMENTS
Mixed Metal Oxide & Pt/Ti AnodesFeatures:• Titanium mesh base• Iridium-mixed-oxide or
Platinum coating• For precious metal solutions
Stainless Steel AnodesFeatures:• Mesh or solid• For degreasing, KLIAR
& CERAMIX
A-MO4.5X4MIX-OXIDE ANODE4.5” X 4”
A-MO4X2MIX-OXIDE ANODE4” X 2”
3004051PT/TI ANODE10CM X 20CM
3004012PT/TI ANODE5CM X 10CM
STAINLESS ANODES30040195CM X 20CM
30070865CM X 26CM
SGR1PDEGREASING POWDER1 KG
A-SS4X2STAINLESS MESH ANODE4” X 2”
A-SS4.5X4STAINLESSMESH ANODE4.5” X 4”
NEUT1SOLUTION5L
NEUT-SASALTS1 KG
L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423
Sold Separately
ADDITIONAL EQUIPMENT
Ductless Fume Extractor& StandHood Features:• 2 Filters: HEPA and carbon filters• Exhaust motor produces 600 cfm air flow• Solid steel construction• Mount on wall or set on stand (sold
separately)• Powder coated
Hood Stand Features:• Solid steel construction• Powder coated
Pen Plating SystemFeatures:• 110/220 V (dual) - 50/60Hz• Digital voltage control; 0.2 - 14V• 5 1/2”W X 5 1/2”D X 2 3/8”H• Resistant to acidic and alkaline solutions• 2 pen ports to run 2 colors at the same
time
Felt Pen TipsPlating Pen Features:• Use with any pen unit• Platinum collar for
superior and consistent deposition
• Long Lasting & corrosion resistant
3007154DUCTLESS FUME EXTRACTOR27”W X 17”D X 29”HWEIGHT: 60 LBS
3024021HOOD STAND27.5”W X 17”D X 23”HWEIGHT: 56 LBS
PENPLATSYS PENPLAT
3024009WHITE FELT PEN TIPSFINE POINT 25/PKG
3024013BROWN FELT PEN TIPSFINE POINT 25/PKG
3024011WHITE FELT PEN TIPSBULLET POINT 25/PKG
3024015DOUBLE-ENDED FELT PEN TIPS25/PKG
Solutions sold separately
L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423
RACKS & ACCESSORIES
30071734.5” DOUBLE RACK16 HOOKSFOR ALL SYSTEMS
30071725” ROUND RACK13 HOOKSFOR 5L SYSTEM ONLY
30071746.5” VERTICAL RACK10 HOOKSFOR ALL SYSTEMS
Plating RacksFeatures:• Brass rack• Steel hooks with Plastisol
coating
30070622L BEAKER
30070795L BEAKER
3024005STIRRING PELLETFOR 1L OR 2L SYSTEMS
3024006STIRRING PELLETFOR 5L SYSTEMS3007074
1L BEAKER
3007100
Carbon Filtration Kit for RhodiumFeatures:• Easy process for filtering
organic contaminants from Rhodium solutions
Visual Rhodium Concentration KitFeatures:• 6 known - 15mL Rh concentration
vials, ranging from 0.8g/L - 2.4 g/L• 10 empty test vials
3007153
L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423
PlatingTV Channel on Features:• New product launches• Tips, trick & techniques• Solution management and maintenance• General plating information
10590 2ND ST. NW, SUITE C ALBUQUERQUE, NM 87114
[email protected] WWW.LEGORGROUP.COM
+1 505 .200 .0423