Leedo - JANUARY 2016 · 2016. 1. 4. · Cabinet sides match the color of the cabinet face. Cabinet...

1JANUARY 2016 - FRAMED SPECIFICATION BOOK

2

TABLE OF CONTENTS

Cabinet Specifications

Cabinet Construction

Modification Legend

Warranty

Door Style Options

Cabinet Care Guide

Base Cabinets

Accessible Base

Vanity Base

Desk Base

Wall Cabinets

Tall Cabinets

Accessories

4

6

7

8

9

15

17

22

27

30

31

35

41

2016 TRADITIONAL CATALOG

4

TRADITIONAL PRODUCT SPECIFICATIONSSTANDARD CABINET CONSTRUCTION:• Face frames are solid oak or maple, glued and nailed with mortise and tenon joints. Frame stiles and rails are 1½” wide and 3/4” thick.• Sides, tops, bottoms, shelves, hang rails, toe-kicks, fillers, skirts and drawer sides are constructed of 1/2” thick, medium density, industrial particleboard. Exposed surfaces are faced with melamine-coated laminate. Cabinet sides match the color of the cabinet face. Cabinet tops and bottoms match the interior color. • Particleboard conforms to all the following Formaldehyde Emission Requirements: a. ANSI 208.1 Table A b. HUD CFR Part 3280 c. California Air Resources Board (CARB) phase II • Particleboard is certified by the Composite Panel Association as complying to their Environmentally Preferable Product (EPP) specification CPA 3-08: a. California ARB approved third party certifier TPC-1 b. Contains 100% recycled and/or recovered fibers (pre-consumer) c. Complies with CPA EPPS 3-08, ANSI A208.1, HUD 24 CFR Part 3280, and CCR 93120 (CARB Composite Wood ATCM Phase 1)• Decorative toe-kick overlay is 1/8” thick, melamine-faced hardboard• Back panels are 1/8” MDF faced with melamine-coated laminate complies with CARB PH II and certified by PSI-TPC#01

DRAWERS:• Drawers feature a five-sided box. 1/2” thick sides are rabbet-jointed, glued, and nailed to front and back.• Drawer box bottoms are 1/4” particleboard core, faced with melamine-coated laminate, except drawer boxes 15” wide or narrower, which have bottoms of 1/8” MDF faced with melamine- coated laminate.• The powder-coated steel drawer runners screwed to each side, anchor the drawer bottoms in place. Drawers are installed with self-adjusting mounting brackets.• Standard drawer slides are nylon-tired, self-closing, 55-pound rated, side-mounted, powder- coated steel.

DOORS:• Raised panel doors feature solid oak or maple stiles and rails. Raised panel is plywood consisting of two oak or maple veneer faces and an inner particleboard core.• Flat panel doors feature solid oak or maple stiles and rails. Center panel is plywood consisting of two oak or maple veneer faces and an inner particleboard core. • Thermofused melamine doors are 5/8” thick with a true fused, melamine impregnated back.• Thermofoil (3D Laminate) doors are 5/8” thick with a fused, melamine impregnated back and a durable vinyl film formed to the front and edges

5

PLYWOOD UPGRADE CABINET CONSTRUCTION: • Face frames are solid oak or maple, glued and nailed with mortise and tenon joints. Frame stiles and rails are 1-1/2” wide and 3/4” thick.• Sides, tops, bottoms, shelves, hang rails, toe-kicks, fillers, skirts and drawer sides are constructed of 1/2” thick plywood. Exposed surfaces are faced with melamine-coated laminate. Cabinet sides match the color of the cabinet face. Cabinet tops and bottom match the interior color. • Decorative toe-kick overlay is 3.6mm thick, melamine-faced plywood. Back panels are 3.6mm thick plywood, faced with melamine-coated laminate.

DRAWERS:• Drawers feature a five-sided box. Sides are 1/2” thick plywood, faced with melamine coated laminate, rabbet-jointed, glued, and nailed to front and back.• Drawer bottoms are 5.2mm plywood, faced with melamine-coated laminate. Bottoms are inset into dado groove in the drawer sides. The powder-coated steel drawer runner is screwed to each side anchor.• Drawers are installed with self-adjusting mounting brackets. • Standard drawer slides are nylon-tired, self-closing, 55-pound rated, side-mounted powder- coated steel.

DOORS:• Raised panel doors feature solid oak or maple stiles and rails. Raised panel is plywood consisting of two oak or maple veneer faces and an inner particleboard core.• Flat panel doors feature solid oak or maple stiles and rails. Center panel is plywood consisting of two oak or maple veneer faces and an inner particleboard core.• Thermofused melamine doors are 5/8” thick with a true fused, melamine impregnated back.• Thermofoil (3D Laminate) doors are 5/8” thick MDF with a fused, melamine impregnated back and a durable vinyl film formed to the front and edges.

TRADITIONAL PRODUCT SPECIFICATIONS

6

CABINET CONSTRUCTIONBASE CABINET

1/2” stretcher1/2” drawer box with 1/8” bottomparticleboard shownEpoxy coated drawer slide1/2” half-depth adjustable shelfCorner block1/8” back panel1/2” bottom1/2” end panel1/2” toekickFaceframeHinge mounting plateHingeDoorDrawer front

1. 2.

3. 4. 5. 6.7. 8. 9.

10.11.12.13. 14.

WALL CABINET

1/2” stretcher1/2” top1/8” back panel1/2” adjustable shelf1/2” bottom1/2” end panelFaceframeHinge mounting plateHingeDoor

1. 2. 3. 4. 5. 6.7. 8. 9.

10.

7

• 1/2” particleboard, 5 sided box• Applied bottom is secured by staples and reinforced by

epoxy-coated slides• Hardboard bottom is either 1/8” for small drawers or 1/4”

for drawers that are 15” or wider

PARTICLEBOARD - STANDARD

• 1/2” particleboard, 5 sided box• Captured bottom fits into a groove cut into the drawer

sides, front and back• Hardboard bottom is either 1/8” for small drawers or 1/4”

for drawers that are 15” or wider

PARTICLEBOARD FULL EXTENSION

• 1/2” plywood sides and 3/16” plywood bottoms• Captured bottom fits into a groove cut into the drawer

sides, front and back• Choice of standard or full extension slides

PLYWOOD

• 1/2” plywood sides and 3/16” plywood bottoms• Captured bottom fits into a groove cut into the

drawer sides, front and back• Dovetailed corners• Choice of standard or full extension slides

PLYWOOD DOVETAIL

DRAWER BOX OPTIONS

MODIFICATION LEGEND

NCM - No Center Mullion (Option Max is 36”)

NTK - No Toe Kick

8

WARRANTY INFORMATION

Thank you for selecting Leedo Cabintery. Leedo works hard to provide an excellent product at a very competitive price. We guarantee all Leedo products for a period of ONE (1) year from the date of the completion of project installation to be free of defects in materials and manufacturing. During this period we agree to replace, at no cost to the owner, any portion of our work that is found defective.

While Leedo guarantees all structural aspects of our products for a period of one year, the following exclusions do apply:

• Due to the naturally occurring variations in wood, we do not guarantee uniformity of color, tone or grain pattern; nor do we guarantee that stain or finish colors will be free of minor inconsistencies caused by natural variations in pigments and materials.

• Damage caused by normal wear and tear, abuse, neglect, misuse, alterations, water damage, or other environmental conditions such as exposure to extreme temperatures or humidity.

• Work done by others, including refinishing or removal of cabinets.

• Touch-ups, door and drawer adjustments, or cosmetic work.

• Color changes that may occur due to natural aging of the wood or due to exposure to either natural or artificial light.

• Discoloration or dullness in the finish or wood stain that may occur after exposure to ultraviolet light.

Leedo Manufacturing will make the final determination on any warranty-related items. Should a defect in materials or workmanship occur, excluding those noted above, Leedo maintains the right to repair or replace the product at our discretion.

9

ASHTON CHURCHILL CONCORD SHAKER FILLMORE FREEPORTBUCKINGHAM

MIDLAND SHAKER PLANOHARTFORD SHAKER RADISSON ROOSEVELT

Light Cherry ChestnutToffee Pecan

Walnut EspressoJava

MAPLE

10

OAK

BROOKSHIRE FLEMING HUNTINGTON

Western Wheat WalnutToffee Nutmeg Espresso

11

ANDOVER BLANCO BRIDGEPORT CENTENNIAL

MIDTOWN SAVANNAH VANCOUVER WASHINGTON

Centex White (smooth) Snow White GlossWhite Wood Grain White Western Wheat

Cocoa PecanLight Cherry Olivewood Euro Wenge Java

THERMOFOIL

12

Toffee ChestnutPecan Espresso

LONDON

TRUTOUCH

13

LUCINA

Texas Cypress Midnight TeakLight Teak

TEXTURED LAMINATE

14

ASTORIA

White

SMOOTH LAMINATE

15

CABINET CARE GUIDE

A soft cotton cloth dampened with warm water is usually sufficient to clean your cabinets. If more thorough cleaning is required, use on the following cleaning solutions:

Using the mildest cleaning solution will successfully clean your cabinets. Stronger products may damage or discolor your cabinet finish and are not recommended. After cleaning, wipe all surfaces with a clean, damp cloth. Dry immediately, using another soft, clean cloth.

Spills

Clean spills immediately. Prolonged exposure to spills, including food, water or other liquids, or grease spills can cause permanent discoloration or damage to your cabinet’s finish.

Cleaning Product to Avoid

Regular Dusting

Use a clean, soft, lint-free cotton cloth for regular dusting. Packaged dusting sheets are not required or recommended. Do not use pre-moistened dusting sheets or aerosol products specified for dusting.

Waxing and Polishing

Waxing is not required or recommended. Over time, waxing and polishing compounds may build up on the surface of your cabinets and cause a hazy, streaky or yellowed appearance.

• A mixture of dishwashing liquid and warm water.

• A mild all-purpose cleaner. Make sure it does not contain ammonia, silicone, or acid.

• Harsh chemicals including ammonia and bleach.

• Abrasive cleaning products such as tub and sink cleaners scouring powder, scouring

pads, or steel wool.

• Sponges or dish clothes. They may contain particles that could scratch your cabinets,

or they may contain food and oil residue.

• Solvent-based or petroleum-based products such as mineral spirits, nail-polish

removers or paint thinners.

• Silicone-based cleaning, waxing or polishing products.

16

Gables Upper Kirby

Camden Gaines Ranch

Avalon Bloomingdale

17

B Base Single Door and Drawer

Width: 9, 12, 15, 18, 21, 24Depth: 21, 24Shelves: 1 Adj. half depth

Width: 24, 27Depth: 21, 24Shelves: 1 Adj. half depth

B Base Single Drawer and Double Door

CABINET DEPTH: 24 (STD), 21 DRAWER DEPTH:19HEIGHT: NTK HEIGHT:34-1/2 30

DOORS:• 09-24W Single Door• Specify Hinge L/R on 09-24 Wide• 24-39W Double Door• 3-inch increments

BASE CABINETS

CODE TEMPLATE:

CODE: BWIDTH: 15 B15-L-21D*DEPTH: 21 *Non std depth

added to code

EXAMPLES:B15-L, B24-L/R, B27, B15-L-21D, B27-21D

Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24Shelves: 1 Adj. half depth

B Base Double Drawer and Door

NTK NTK NCM

NTK NCM

TOE KICK HEIGHT: 4-1/2

Width: 9, 12, 15, 18, 21, 24Depth: 15, 18, 21, 24Shelves: 1 Adj. half depth

BFHD Base Full Height Single Door

• Center mullion

Width: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24Shelves: 1 Adj. half depth

BFHD Base Full Height Double Door

NCM

D3B Base 3 Drawer

• Top drawer front is 5.5” tall• Two equal size lower drawersWidth: 12, 15, 18, 21, 24, 27, 30, 36Depth: 21, 24

18

D4B Base 4 Drawer

• Top drawer front is 5.5” tall• Three equal size lower drawers

Width: 12, 15, 18, 21 24, 27, 30, 36Depth: 21, 24

BBS Base Bookshelf

• Two equal openings• Color matching interior• Fixed middle rail

Width: 18, 21, 24, 27, 30Depth: 12, 21, 24

• One door• One drawer• One 35 qt. waste container

Width: 15, 18, 21Depth: 24

BTCP Single Trash Can Pullout BDTCP Double Trash Can Pullout

• One door• One drawer• Two 35 qt. waste containers

Width: 18, 21Depth: 24

BFHDTCP

• One door• Two 35 qt. waste containers


BWR Base Wine Rack

• Color matching interior

Width: 18, 21, 24, 27, 30 Depth: 12

Single Trash Can Pullout BFHDDTCP Double Trash Can Pullout

• One full height door• One 35 qt. waste container

Width: 15, 18, 21Depth: 24

BWRL Lattice Wine Rack


Width: 18, 21, 24Depth: 12

19

BBCR

• One door • One drawer

Width: 36, 39, 42, 45Depth: 24

ERB Easy Reach Base

• One bifold door

Width: 33, 36Depth: 21, 24

BBCL Blind Base BBCRFHD

• One Door

Width: 15, 18, 21, 24Depth: 24

BBCLFHD Blind Base Full Height Door

ERB 12”

12”

36”Wall

BBCL36/39BBCL39/42BBCL42/45BBCL45/48

27333945

9121518

Installation Example - Blind Corner Base

Item

OverallCabinet Width

Replaces Cabinetand Filler for

Designed to be pulled out of corner, see installation example at right. Specify L/R blind (blind right show). Blind Corner Base Cabinets can be reversed by relocating door and drawer. Filler is required. Order seperately.

Installation example below Installation example below

Width: 36Depth: 24

LSB Lazy Susan Base

• One bifold door

• One full height door

Width: 18, 21, 24Depth: 15, 18, 21, 24

SBFHD Sink Base Full Height Door SB Sink Base

• One false front• One door

Width: 18, 21, 24Depth: 15, 18, 21, 24

36394245

Reach

39424548

Min Max

Mullion Reveal

Min Max

9

Mullion Reveal3" Min Filler

Cabinet Width

Reach

Pull0000

3333

24”

24”

20

CSB Combo Sink Base

• One false front• Two doors• Two drawers

Width: 36, 39, 42, 45, 48Depth: 21, 24

DS

Width: 18, 21, 24, 27, 30, 36Depth: 21, 24Height: 6

Drawer Skirt

Width: 18, 21, 24, 27 30, 36Depth: 21, 24Height: 4

PD Pencil Drawer

• Two full height doors

Width: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24

SBFHD Sink Base Full Height Door

NCM

Width: 18, 21, 24, 27, 30, 36Depth: 21, 24Height: 6

DST is trimmable and has 3” stiles.

DST Drawer Skirt Trimmable

Width: 18, 21, 24, 27 30, 36Depth: 21, 24Height: 4

PDT Pencil Drawer Trimmable

PDT is trimmable and has 3” stiles.

SB Sink Base

• One false front• Two doors

Width: 24, 27Depth: 15, 18, 21, 24

SB Sink Base• Two false fronts• Two doors

Width: 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24

NCM NCM

MWC-B Microwave Cabinet Base

• One bottom drawer

Width: 27, 30, 33Depth: 24

21

REMOVABLE CABINETS

Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24Shelves: 1 Adj. half depth

REM-B Removable Base

• Two drawers• Two doors

End panels are 3” shorter than cabinet

NCM

• Two doors

Width: 30, 33, 36, 39 42, 45, 49Depth: 21, 24Shelves: 1 Adj. half depth

REM-BFHD Removable Base FHD


UFAS-SB UFAS Sink Base

• Removable sink base• Color matching interior

Width: 30, 33, 36Depth: 21, 24

UFAS-SBFHD UFAS Sink Base FHD

• Removable sink base• Color matching interior

Width: 30, 33, 36Depth: 21, 24

• Knee clearance height in SKU

Width: 30, 33, 36Depth: 24, 21

UFAS-IO UFAS Sink Base Insert Only

• Two false fronts• Two doors

Width: 30, 33, 36, 39Depth: 12, 15, 18, 21, 24

REM-SB Removable SB


NCM

22

CABINET DEPTH: 24 (STD), 21DRAWER DEPTH:19HEIGHT: NTK HEIGHT:32-1/2 27

DOORS:• 09-24W Single Door • Specify Hinge L/R on 09-24 Wide• 24-39W Double Door• 3-inch increments

ACCESSIBLE CABINETS

HCB HC Base

• One door• One drawer

• Two doors • One drawer• Center mullion

Width: 9, 12, 15, 18, 21, 24Depth: 21, 24

Width: 24, 27Depth: 21, 24

• One door

Width: 9, 12, 15, 18, 21, 24Depth: 15, 18, 21, 24

HCBFHD HC Base Full Height Door

• Two doors• Center mullion

Width: 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24

CODE TEMPLATE:CODE: HCBWIDTH: 15 HCB15-L-21D*DEPTH: 21 *Non std depth

added to code

EXAMPLES:HCB15-L, HCB24-L/R, HCB27, HCB15-L-21D, HCB27-21D

• Two doors• Two drawers• Center MullionWidth: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24

HCB HC Base

HCB HC Base

HCBFHD HC Base Full Height Door

NCM

NCM

NCM


HCD3B HC Drawer 3 Base

• Three equal sized drawers

Width: 12, 15, 18, 21, 24, 27, 30, 36Depth: 21, 24

23

HCD4B HC Drawer 4 Base

• Top drawer front 5.5” tall, remaining fronts equal

Width: 12, 15, 18, 21, 24, 27, 30, 36 Depth: 21, 24

HCBBS HC Base Bookshelf

• Color matching interior• Fixed middle rail

Width: 18, 21, 24, 27, 30Depth: 12, 21, 24

HCBTCP HC Single Trash Can Pullout

• One door• One drawer• One 35 qt. waste container

Width: 15, 18, 21Depth: 24

• One door• One drawer• Two 35 qt. containersWidth: 18, 21Depth: 24

HCBDTCP HC Double Trash Can Pullout

HC FHD Trash Can Pullout

• One door• One 35 qt. waste container

Width: 15, 18, 21Depth: 24

• One door• Two 35 qt. containers


HCBFHDTCP HC FHD Double Trash CanHCBFHDDTCP

HCBBCR


Width: 12, 15, 18, 21, 24Depth: 24

• One door

Width: 12, 15, 18, 21, 24Depth: 24

HCBBCRFHDHCBBCL HCBBCLFHD HC Blind Base HC Blind Base FHD

HCBBCL36/39HCBBCL39/42HCBBCL42/45HCBBCL45/48HCBBCL48/51

HCBBCLFHD36/39HCBBCLFHD39/42HCBBCLFHD42/45HCBBCLFHD45/48HCBBCLFHD48/51

24

HCERB 12”

12”

36”Wall

• Two doors

Width: 36Depth: 24

HCERB HC Easy Reach Base

• Two doors

Width: 33, 36Depth: 21, 24

HCLSB HC Lazy Susan Base

• One door

Width: 18, 21, 24Depth: 15, 18, 21, 24

HCSBFHD HC Sink Base FHD• Two doors• Center mullion

Width: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24

HCSBFHD HC Sink Base FHD

HCSB HC Sink Base

Width: 15, 18, 21, 24Depth: 12, 15, 18, 21, 24

• One door• One false front

HCSB HC Sink Base

• Two doors• Two false front

Width: 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24

Width: 24, 27Depth: 15, 18, 21, 24

• Two doors• One false front

HCSB HC Sink Base

NCM

NCM

NCM

• Two drawers• Two doors• One false front

Width: 36, 39, 42, 45, 48Depth: 21, 24

HCCSB Combo Sink Base

25

HCBWRL HC Lattice Wine Rack


Width: 18, 21, 24Depth: 12

HCBWR HC Base Wine Rack


Width: 18, 21, 24, 27, 30Depth: 12

26

REMOVABLE CABINETS

Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24

REM-HCB HC Removable Base

• Two doors• Two drawers


NCM

Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24

REM-HCBFHD Removable Base FHD

• Two doors


NCM

UFAS-HCSB


Width: 30, 33, 36Depth: 21, 24

UFAS HC Sink Base

NCM

UFAS-HCSBFHD UFAS HC Sink Base FHD


Width: 30, 33, 36Depth: 21, 24

NCM

• Knee clearance height in SKU

Width: 30, 33, 36Depth: 24, 21

UFAS-IO UFAS Sink Base Insert Only


Width: 30, 33, 36, 39,Depth: 12, 15, 18, 21, 24

REM-HCSB Removable Sink Base

NCM

27

CABINET DEPTH: 24, 21 (STD)DRAWER DEPTH:19HEIGHT: 31-1/2

DOORS:• 09-24W Single Door• Specify Hinge L/R on 09-24 Wide• 24-39W Double Door• 3-inch increments

VANITY BASE CABINETS

CODE TEMPLATE:

CODE: VBWIDTH: 15 VB15-L-24D*DEPTH: 24

VB Vanity Base


• Two doors• One drawer

Width: 9, 12, 15, 18, 21, 24Depth: 21, 24

Width: 24, 27Depth: 21, 24

• Two doors • Two drawer

Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24

VB Vanity Base

VB Vanity Base

EXAMPLES:VB15-L, VB24-L/R, VB27, VB15-L-24D, VB27-24D

*Non std depth added to code

NCM

NCM


VBFHD VB Full Height Door

• One door

Width: 9, 12, 15, 18, 21, 24Depth: 15, 18, 21, 24

VBFHD VB Full Height Door

• Two doors

Width: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24

NCM

• Three drawer• Equal sized drawers

Width: 12, 15, 18, 21, 24, 27, 30, 36Depth: 18, 21, 24

All drawer fronts are equal height

VD3B Base 3 Drawer

28

• Four drawer• Top drawer front is 5.5” tallWidth: 12, 15, 18, 21, 24, 27, 30, 36Depth: 18, 21, 24

Top drawer front 4.5” tall, remaining drawer fronts are equal

VD4B Base 4 Drawer

VSB Vanity Sink Base

• Two doors• Two false frontWidth: 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24


Width: 18, 21, 24Depth: 15, 18, 21, 24

Width: 24, 27Depth: 15, 18, 21, 24


• One door• One false front

• Two doors• One false front

• One door

Width: 18, 21, 24Depth: 15, 18, 21, 24

VSBFHD Vanity Sink Base FHD

• Two doors• Center mullionWidth: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24

VSBFHD Vanity Sink Base FHD

NCM NCM

NCM

CVSB Combo Vanity Sink Base

Width: 36, 39, 42, 45, 48Depth: 21, 24

• Two doors• One false front• Two drawers

29

REMOVABLE CABINETS

• Two doors• Two drawers

Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24

REM-VB Removable Vanity Base


NCM

REM-VBFHD Removable Vanity Base FHD

• Two doors

Width: 30, 33, 36, 39, 42, 45, 48 Depth: 21, 24

NCM

UFAS-VSB


Width: 24, 27, 30, 33, 36, 39Depth: 21, 24

UFAS Vanity Sink Base UFAS-VSBFHD UFAS Vanity Sink Base FHD


Width: 24, 27, 30, 33, 36, 39Depth: 21, 24

NCM


Width: 30, 33, 36, 39, 42, 45, 48Depth: 12, 15, 18, 21, 24

REM-VSB Removable Vanity Sink Base

NCM

30

• Three drawer• Top drawer front is 5.5” tall

Width: 12, 15, 18, 21, 24, 27, 30, 36Depth: 18, 21, 24

DKD3B Base 3 Drawer• Two drawer• Equal sized drawers

Width: 18, 21Depth: 18, 21, 24

DKD2B Base 2 Drawer

CABINET DEPTH: 24 (STD), 21DRAWER DEPTH:19HEIGHT: NTK HEIGHT:28-1/2 24


DESK BASE CABINETS

CODE OUTLINE:

CODE: DKBWIDTH: 15 DKB15-L-21D*DEPTH: 21 *Non std depth

added to code

EXAMPLES:DKB15-L, DKB24-L/R, DKB27, DKB15-L-21D, DKB27-21D

DKB Desk Base


Width: 9, 12, 15, 18, 21, 24Depth: 21, 24

Width: 24, 27Depth: 21, 24

• One door

Width: 9, 12, 15, 18, 21, 24Depth: 15, 18, 21, 24

DKB Desk Base

DKBFHD Desk Base Full Height Door

• Two doors• One drawer• Center mullion

Width: 30, 33, 36, 39, 42, 45, 48Depth: 21, 24

DKB Desk Base

• Two doors• Two drawers• Center mullion

NTK NTK NCM

NTK NCM


DKBBS Desk Base Bookshelf

• Color matching interior• Fixed middle rail

Width: 18, 21, 24, 27, 30Depth: 12, 21, 24

• Two doors• Center mullion

Width: 24, 27, 30, 33, 36, 39, 42, 45, 48Depth: 15, 18, 21, 24

DKBFHD DK Base Full Height Door

NCM

All drawer fronts are equal height

31

CABINET DEPTH: 15, 12 (STD)

SHELF RULE: 12 – 18” No shelves21 – 27” 1 Shelf30 – 39” 2 Shelves 42” 3 Shelves


WALL CABINETS

CODE TEMPLATE:

CODE: WWIDTH: 15 W15-L-15D*

DEPTH: 15

W Wall

• One door

Width: 9, 12, 15, 18, 21, 24Height: 12, 15, 18, 21, 24, 27, 30, 36, 42Depth: 12, 15, 24 (no shelf)

• Two doors

Width: 24, 27, 30, 33, 36, 39Height: 12, 15, 18, 21, 24, 27, 30, 36, 42Depth: 12, 15, 24 (no shelf)

W Wall

WL Wall Linen

• One door• Bottom fixed opening is 4.5”

Width: 21 Height: 30Depth: 9, 12, 15

EXAMPLES:W09-L, W24-L/R, W27, W15-L-15D, W27-15D


No shelves on 24” and 27” height

WL Wall Linen

• Two doors• Bottom fixed opening is 4.5”

Width: 24, 27, 30Height: 30Depth: 9, 12, 15

No shelves on 24” and 27” height

NCM

NCM

32


Width: 18, 21, 24, 27, 30Height: 15, 18, 21, 24, 27, 30Depth: 12

WR Wine Rack

• Color matching interior• 36” tall up to 18” wide• 30” tall up to 24” wide• 36” wide up to 18” tall• 30 wide up to 24” tall

Width: 18, 21, 24, 27, 30 Height: 18, 21, 24, 27, 30, 36Depth: 12

WRL Wine Rack Lattice

Size restrictions on certain dimensions - detailed above.

• Two doors• Microwave opening is 13-1/2” high

Width: 24, 27, 30, 33, 36Height: 30, 36, 42Depth: 12, 24


Width: 12, 15, 18, 21, 24, 27, 30Height: 18, 21, 24, 27, 30, 36, 42Depth: 9, 12, 15

MWC Microwave Wall BS Wall Book Shelf

Microwave shelf (MWS) has to be ordered seperately

NCM

33

Width: 24Height: 18, 24, 30, 36, 42Depth: 12

A Angle Wall Cabinet

Width: 27Height: 18, 24, 30, 36, 42Depth: 15

A Angle Wall Cabinet

Width: 12, 15, 18, 21, 24Height: 30, 36, 42Depth: 12

WBCL WBCR

Blind Wall Corner

Width: 27, 30 Height: 30, 36, 42Depth: 12

WBCL WBCR

Blind Wall Corner

• One door • Two door

Full Overlay for Wall Blind Corner

WBCL24/27xxWBCL27/30xxWBCL30/33xxWBCL33/36xx

24273033

CabinetWidthItem

CabinetReplaced

FO Pull FO Reach

12151821

1.51.51.51.5

Installation example below Installation example below

Cabinet Width

1 1/2" min FO Filler3/4" min FO Filler

Pull

Reach

Mullion Reveal

4.54.54.54.5

25.528.531.534.5

28.531.534.537.5

Standard Overlay for Wall Blind Corner

24273033

CabinetWidthItem

CabinetReplaced

SO Pull SO Reach

12151821

.75

.75

.75

.75

4.54.54.54.5

24.7527.7530.7533.75

28.531.534.537.5

Min Max Min Max

Min Max 3 6

WBCL24/27xxWBCL27/30xxWBCL30/33xxWBCL33/36xx

34

Width: 24, 27Height: 30, 36, 42Depth: 12, 15

ERW Easy Reach Wall

Width: 1 5Height: 18, 21, 24, 27, 30, 36

MC Medicine Cabinet

35

P Pantry Cabinet

• One door top and bottom• 4-1/2” toe kick

Width: 12, 15, 18, 24Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)

• Two doors top and bottom• 4-1/2” toe kick

Width: 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)

LC Linen Cabinet





LC Linen Cabinet

CABINET DEPTHS: 12, 18, 21, 24


CODE TEMPLATE:

CODE: PWIDTH: 15 P1584-L-21D*

HEIGHT: 84

EXAMPLES:P1290-L, P2484-L/R, P2790, P1596-R-15D


TALL CABINETS

DEPTH: 21

NTK NTK

NTKNTK

P Pantry Cabinet

36

• One door top and bottom• Flip down drawer front between doors• 4-1/2” toe kick

Width: 12, 15, 18, 24Height: 84, 90, 96Depth: 12, 18, 21 (std), 24

• Two doors top and bottom• Flip down drawer front between doors• 4-1/2” toe kick

Width: 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21 (std), 24

LHC Linen Hamper LHC Linen Hamper



UC Single Utility Cabinet

NTK

NTK NTK


Width: 12, 15, 18, 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21, 24

TBS Tall Bookshelf



UC Double Utility Cabinet

NTK

37

OC Single Oven - 3 Drawer

• 4-1/2” toe kick

Width: 30, 33, 36Height: 84, 90, 96Depth: 24, 26

NTK


• 4-1/2” toe kick


NTK


• • 4-1/2” toe kick


NTK

Installation Example - Oven Cabinets

6” Rail can becut down to 1-1/2”

6” Rail is removable and can be reinserted where drawer has been removed if needed.

Possible Opening Sizes

24” t

o 34

.5”

32.5

” to

43”

Designed to be cut to fit the majority of manufactured oven units. The maximum and minimum dimension shown are on-the-job modifications of the opening in height and width for the appliance to be used.

41” t

o 51

.5”

49.5

” to

60”

Cutout Widths:

30” WideMinimum - 24”Maximum - 28 - 1/2”

33” WideMinimum - 27”Maximum - 31-1/2”

36” WideMinimum - 30”Maximum - 34-1/2”

38

TALL ACCESIBLE CABINETS

HCP HC Pantry Cabinet





NTK NTK

HCP HC Pantry Cabinet

HCLC HC Linen Cabinet





HCLC HC Linen Cabinet

NTKNTK

39


Width: 12, 15, 18, 24Height: 84, 90, 96Depth: 12, 18, 21 (std), 24


Width: 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21 (std), 24

HCLHC HC Linen Hamper HCLHC HC Linen Hamper

NTK NTK

• One door top and bottom• 5.5” toe kick

Width: 12, 15, 18, 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12, 18, 21, 24 (std)

HCUC HC Single Utility Cabinet

NTK




NTK

HCUC HC Double Utility Cabinet

40


• Color matching interior• 5.5” toe kick

Width: 12, 15, 18, 24, 27, 30, 33, 36Height: 84, 90, 96Depth: 12 (std), 18, 21, 24

HCTBS HC Tall Bookshelf

41

Panels1/2”3/4”

BaseBase Depth VanityVanityVanity Depth Base

HC Base84” Tall Base90” Tall Base96” Tall Base

84” Tall Vanity Depth90” Tall Vanity Depth96” Tall Vanity Depth48” Wide Base Height

48” Wide Vanity Height1/2 SheetFull Sheet

EP2434 - PaperEP2431 - PaperEP2131 - PaperEP2124 - Paper



EP4831 - PaperEP4848 - PaperEP4896 - Paper

EP2434 - VeneerEP2431 - VeneerEP2131 - VeneerEP2134 - Veneer



EP4831 - VeneerEP4848 - VeneerEP4896 - Veneer

24-1/8”W x 34-1/2”H24-1/8”W x 31-1/2”H21-1/8”W x 31-1/2”H21-1/8”W x 34-1/2”H

24-1/8”W x 32-1/2”H24-1/8”W x 84”H24-1/8”W x 90”H24-1/8”W x 96”H

21-1/8”W x 84”H21-1/8”W x 90”H21-1/8”W x 96”H48”W x 34-1/2”H

48”W x 31-1/2”H48”W x 48”H48”W x 96”H

Grain pattern runs vertical and each panel is banded on front and back edges

1/2” Paper 3/4” Veneer Actual Size

Return PanelsBase 3” Front DW End PanelBase 6” Front DW End PanelBase 9” Front DW End PanelBase Depth Vanity 3” Front

Base Depth Vanity 6” FrontBase Depth Vanity 9” FrontVanity 3” FrontVanity 6” Front

Vanity 9” FrontVanity Depth Base 3” FrontVanity Depth Base 6” FrontVanity Depth Base 9” Front

HC Base 3” FrontHC Base 6” FrontHC Base 9” FrontHC Vanity 3” Front

HC Vanity 6” FrontHC Vanity 9” Front84” Tall Base Depth 3” Front90” Tall Base Depth 3” Front

96” Tall Base Depth 3” Front84” Tall Vanity Depth 3” Front90” Tall Vanity Depth 3” Front96” Tall Vanity Depth 3” Front

BRP3 BRP6 BRP9 VRP3 - 24D

VRP6 - 24DVRP9 - 24DVRP3VRP6

VRP9BRP3 - 21DBRP6 - 21DBRP9 - 21D

HCBRP3HCBRP6HCBRP9HCBRP3 - 21D

HCBRP6 - 21DHCBRP9 - 21DTRP384TRP390

TRP396TRP384 - 21 DeepTRP390 - 21 DeepTRP396 - 21 Deep

BRP3 - SolidBRP6 - SolidN/AVRP3 - Solid - 24D

VRP6 - Solid - 24DN/AVRP3 - SolidVRP6 - Solid

N/ABRP3 - Solid - 21DBRP6 - Solid - 21DN/A

HCBRP3 - SolidHCBRP6 - SolidN/AHCVRP3 - Solid

HCVRP6 - SolidN/ATRP384 - SolidTRP390 - Solid

TRP396 - SolidTRP384 - Solid - 21DTRP390 - Solid - 21DTRP396 - Solid - 21D

3”W x 34-1/2”H x 24-1/8”D6”W x 34-1/2”H x 24-1/8”D9”W x 34-1/2”H x 24-1/8”D3”W x 31-1/2”H x 24-1/8”D




6”W x 32-1/2”H x 21-1/8”D9”W x 32-1/2”H x 21-1/8”D3”W x 84”H x 24-1/8”D6”W x 90”H x 24-1/8”D

9”W x 96”H x 24-1/2”D3”W x 84”H x 21-1/2”D3”W x 90”H x 21-1/2”D3”W x 96”H x 21-1/8”D

Dishwasher End Panel shown

- order as a BRP

1/2” Return w/ Veneer Front 3/4” Solid Actual Size

3”6”24”

34-1/2”

42

End SkinBase CabinetBase Depth VanityVanity CabinetVanity Depth Base

HC Base CabinetHC Vanity Cabinet12” Tall Wall Cabinet15” Tall Wall Cabinet

18” Tall Wall Cabinet24” Tall Wall Cabinet30” Tall Wall Cabinet36” Tall Wall Cabinet

42” Tall Wall Cabinet84” Tall Pantry90” Tall Pantry96” Tall Pantry

84” Tall Linen90” Tall Linen96” Tall Linen48” Wide Base Skin

48” Wide Vanity Skin1/2 SheetFull Sheet

SK2434 - PaperSK2431 - PaperSK2131 - PaperSK2134 - Paper





SK4831 - PaperSK4848 - PaperSK4896 - Paper

SK2434 - VeneerSK2431 - VeneerSK2131 - VeneerSK2134 - Veneer





SK4831 - VeneerSK4848 - VeneerSK4896 - Veneer

23-3/8”W x 34-1/2”H23-3/8”W x 31-1/2”H20-3/8”W x 31-1/2”H20-3/8”W x 34-1/2”H

23-3/8”W x 32-1/2”H20-3/8”W x 32-1/2”H11-1/4”W x 12”H11-1/4”W x 15”H

11-1/4”W x 18”H11-1/4”W x 24”H11-1/4”W x 30”H11-1/4”W x 36”H

11-1/4”W x 42”H23-3/8”W x 84”H23-3/8”W x 90”H23-3/8”W x 96”H

20-3/8”W x 84”H20-3/8”W x 90”H20-3/8”W x 96”H48”W x 43-1/2”H

48”W x 31-1/2”H48”W x 48”H48”W x 96”H

This application dipicts a skin applied to a Pantry Cabinet

1/8” Paper 3/16” Veneer Actual Size

Skirts 3/4” Veneer 3/4” Solid Actual Size

3” Wide Skirts

4” Wide Skirts

SKT30SKT36SKT42SKT48SKT60SKT72SKT84SKT96

SKT30 - 4WSKT36 - 4WSKT42 - 4WSKT48 - 4W SKT60 - 4WSKT72 - 4WSKT84 - 4WSKT96 - 4W

SKT30 - SolidSKT36 - SolidSKT42 - SolidSKT48 - SolidSKT60 - SolidSKT72 - SolidSKT84 - SolidSKT96 - Solid

SKT30 - Solid - 4WSKT36 - Solid - 4WSKT42 - Solid - 4WSKT48 - Solid - 4WSKT60 - Solid - 4WSKT72 - Solid - 4WSKT84 - Solid - 4WSKT96 - Solid - 4W

3”W x 30”L3”W x 36”L3”W x 42”L3”W x 48”L3”W x 60”L3”W x 72”L3”W x 84”L3”W x 96”L

4”W x 30”L4”W x 36”L4”W x 42”L4”W x 48”L4”W x 60”L4”W x 72”L4”W x 84”L4”W x 96”L

Color matching front and bottom

43

Fillers

30” Long

36” Long

42” Long

84” Long

90” Long

96” Long

F330F330F630F930

F336F336F636F936

F342F342F642F942

F384F384F684F984

F390F390F690F990

F396F396F696F996

F330 - SolidF330 - SolidF630 - Solid N/A

F636 - SolidF636 - SolidF636 - SolidN/A





3/4”W x 30”H3”W x 30”H6”W x 30”H9”W x 30”H

3”W x 36”H3”W x 36”H6”W x 36”H9”W x 36”H

3/4”W x 42”H3”W x 42”H6”W x 42”H9”W x 42”H

3/4”W x 84”H3”W x 84”H6”W x 84”H9”W x 84”H

3/4”W x 90”H3”W x 90”H6”W x 90”H9”W x 90”H

3/4”W x 96”H3”W x 96”H6”W x 96”H9”W x 96”H

3/4” Veneer 3/4” Solid Actual Size

Microwave ShelfCabinet Width

MWC24xx

MWC27xx

MWC30xx

MWC33xx

MWC36xx

MWC42xx

Microwave Cabinet Shelf Name Shelf Width

24”

27”

30”

33”

36”

42”

MWS2418

MWS2718

MWS3018

MWS3318

MWS3618

MWS4218

21”

24”

27”

30”

33”

36”

44

1/8” Toe Kick Overlay

DOOR

• Specify door dimensions W x H

Applied Doors

WCP15 Wall Cabinet Corner Floor

Width: 15Height: 15Thick: 1/2

ROS

ROS12 - Fits 12” and 24” CabinetsROS15 - Fits 15” and 30” CabinetsROS18 - Fits 18” and 36” CabinetsROS21 - Fits 21” and 42” CabinetsROS24 - Fits 24” (NCM) and 48” CabinetsROS27 - Fits 27” (NCM) Cabinets

Roll Out Shelf Kit

Cabinet is ordered seperately. Kit is applied in the field

STV Valance

• Horizontal grain only

Length: 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 42, 45, 48Height: 3

RF Range front

• Range front

Length: 24, 27, 30, 33, 36Height: 4

METAL LEG Metal Furniture Foot

• Metal furniture foot with leveler and mounting bracket• Brushed finish

Size: 30mm x 30mmHeight: 4-1/2

One leg is needed to support each end of a cabinet run and one leg needed to support the joint between two cabinets.

• 8 ft. length• Color matching finish

TKHCTK 3/16” Veneer Toe Kick Overlay

• 8 ft. length• Color matching finish

TK- VeneerHCTK-Veneer

• Finish is available in natural or white

45

Molding - Flat Molding - Scribe

1/8” x 3/4” x 8” 1/8” x 1-3/4” x 8’

Outside Molding Inside Molding Shoe Molding

3/4” x 3/4” x 8’ 3/4” x 3/4” x 8 3/4” x 3/4” x 8

Molding - Crown Molding - Large Crown

2-3/4” x 8’1-5/8” x 8’

SCRIBE96

OCM96 ICM96 SHOEL96

46NOTE: Due to various printing limitations or monitor displays, color pictures cannot be guaranteed to exactly match the actual cabinet material.

©2016 LEEDO FRAMED PRODUCT LINE CATALOG 1/16

NOTICE: The framed cabinet specifications appearing herein supersede and cancel all previous sheets, supplements and addenda, and represent current manufacturing standards and procedures. Leedo Cabinetry reserves the right to make specification changes for continued product improvement. Leedo warrants all structural aspects of our products for a period of one year, excluding the results of normal wear and tear, damages that arise from misuse, and open joint lines on that occur from natural expansion and contraction of wood.

CARB2compliant

Leedo - JANUARY 2016 · 2016. 1. 4. · Cabinet sides match the color of the cabinet face. Cabinet...

Documents

Transcript of Leedo - JANUARY 2016 · 2016. 1. 4. · Cabinet sides match the color of the cabinet face. Cabinet...