LEE PRECISION INC. - HIGGINSON POWDERShigginsonpowders.com/images/2021_Lee_Catalogue.pdfLEE LOADER...

1

acpAUTOMATICCASE PRIMER

L E E P R E C I S I O N I N C .

www.leeprecision.com

ReLOADinG21

See page 30

‡ Calibers requiring considerable force for sizing.

Classic Lee Loader

More shooters have chosen the famous Lee Loader for their first reloading tool than any other. They realize it is all they need for good, accurate ammunition. In fact, at one time ammunition loaded with a Lee Loader held a world record listed in the Guinness Book of World Records for more than seven years. Millions upon millions of rounds have been reloaded with the famous Lee Loader. It’s the perfect tool for those who wish to simply try reloading, because it will pay for itself in just an hour or two. Find out for yourself how much fun it is to reload with the Lee Loader. Everything you need to begin loading one caliber!

LEE LOADER 41.98

www.leeprecision.com2

LEE PRECISION, INC.

The kit that started it all, The Classic Lee Loader

2-3 Lee Loader | Reloading Basics

4 Reloading Stand | Bench Plate

5 Modern Reloading II

6-7Pistol Reloading Dies Carbide Factory Crimp Dies

8 Pistol Dies Size Chart

9Spline Drive Lock Rings Shellholders

10 Rifle Die Selection

11 Rifle Factory Cimp Dies

12-13Rifle PaceSetter DiesRifle Collet | Ultimate Die Sets

14-15 Rifle Dies Size Chart

16-17Reloading Press Overview Single Stage and Progressive

18Breech Lock Reloader | Breech Lock Hand Press & Kit | Ram Prime | Breech Lock Ram Prime

19Breech Lock Challenger Press | 50th Anniversary Kit Breech Lock Challenger Kit

20Classic Cast Press 50 BMG Press Kit

21 Classic Turret Press and Kit

22 Value Turret Press and Kit

23 Progressive Press Accessories

24 Pro 1000 | Pro 4000

25 Pro 4000 | Load-Master

26 The APPAutomatic Processing Press

27 The APP Accesories

28 Quick Trim Dies | Case Trim Tools

29 Quick Trim & Case Length Gauge Charts | Bulge Buster Kit

30 ACP | Auto Bench Prime

31 Auto-Prime | Ergo PrimePriming Tool Kits | Shellholders

32Deluxe Perfect Powder Measure Perfect Powder Measure Safety Scale | Powder Funnel Powder Measure Kit

33Pro Auto Disk Powder Measure Auto Drum Powder Measure

34 Electric Melters

35 Lubrication and Sizing

36 Rifle Bullet Molds

37 Pistol Bullet Molds

38 Black Powder Bullet Molds

39Slug Molds | Buckshot Molds | Load-All II

SIZE PRIME

REMOVING spent primer and RESIZING case can be accomplished by using any reloading press

INSTALL PRIMERCan be done on press or by hand

Breech Lock Challenger Presspg 19

LUBRICATE an inspected, clean case.

FOR SAFETY SAKE

CHECK CASES for proper

trim length. Chamfer inside

case neck to allow easy bullet

installation.

Case Conditioning Kit

pgs 28– 29

Pistol Sizing Die

Priming withLee Auto-Bench Primepg 30

Press Priming with the new Lee ACP Automatic Case Primer pg 30

Hand Prime with NewAuto-Primepg 31

R

IF

LE

HA

ND

GU

N R E L O A D I N G S E

On press: Prime with Lever Prime Systempg 19

TRIMFULL

LENGTHSIZE

COLLET

NECKSIZE

Rifle Full Length Sizing Die

NOTICE how the case neck is sized as case is withdrawn from dieover the expander

Rifle Collet Necksizing DieNo lube required. Cases must be fired through your gun only.

OR

Deluxe Quick Trim,

trim and chamfer simultaneously

pg 28-29

The next revolution in priming

LEE PRECISION, INC.4275 HIGHWAY UHARTFORD WI 53027262 673 3075

SIZING TYPE LEE LOADER SIZES

NECK SIZE

223 Remington 90232

243 Winchester 90235


7.62x54 Russian 90243

30/30 Win (30 Rem). 90244


30/06 Springfield 90248

303 British 90247

45/70 Government 90264

FULL LENGTH 9mm Luger 90254

NECK SIZE

38 Special 90257

357 Magnum 90258

‡44 Magnum 90260

FULL LENGTH ‡45 ACP 90262

NECK SIZE ‡45 Colt 90263

LEE LOADER

3

ReLOADinG21

Check out our complete line of reloading and casting equipment on our website, then visit your local merchant.

If not blessed with a local dealer, one of the many online dealers will quickly and economically fill your order.

RELOADING IS AN ENJOYABLE HOBBY, saves you money — and no manufacturer saves you more than Lee Precision, Inc. Our mission is simple: produce the best

American made value in reloading tools. Our great prices come from patented, innovative designs. We are thankful to say that Lee Precision products are cast, machined and assembled in the USA. A reloading press and a set of Lee Dies are all you need to start reloading. Lee Dies come complete with powder dipper, shell holder and instructions, along with comprehensive load data that tells

you how much and what type of powder to use. Dies and presses last a lifetime, so buying what your budget allows makes the most sense. For those with a workbench, consider our Lee Bench Plate for the ultimate convenience in mounting your presses. If you don’t have a workbench, consider the Lee Reloading Stand, compact and very sturdy. If you have no loading equipment and are just getting started, you must consider that these basic steps need to be taken below.

CHARGE SEAT & CRIMP

SEAT AND CRIMP THE BULLET

CHARGE POWDER

HANDGUN Bullet Seating Die

HANDGUN Carbide Factory Crimp DieEasy to adjust crimp and carbide ring post sizes the case. pg 7

HANDGUN Powder Through Expanding Die

Auto Drum Powder Measure pg 33

Deluxe Perfect Powder Measure pg 32

Powder Funnel and Dippers pg 32

FACTORY CRIMP DIEIn most circumstances will improve velocity, uniformity and in all cases, factory-like utility & dependability.pg 11

RIFLE Easy Adjust

Dead LengthBullet Seating

Die

I N G S E Q U E N C E

OPTIONALOPTIONAL

SEAT THE BULLET

SEAT CRIMPCHARGE

EXPAND CASE MOUTH AND CHARGE POWDER. Lee handgun dies are unique in that you can charge powder during this operation

RELOADING BASICS

4 4

LEE PRECISION, INC.

Concrete block not

AND REPLACE

Patented design allows instant press change. So sturdy you can resize the monster

50 BMG case, then quickly switch to a smaller press for priming or other operations.

Trapezoidal base block slides into perfect register and made immoveable with the

quick tightening of four bolts.

Includes steel base block with holes to mount any Lee press. Powder coated, thick steel plate mounts quickly and securely to any bench or tabletop. Wide steel plate distributes load, adding rigidity to the lightest bench top.

Lee Bench Plate 90251 32.00

a c c e s s o r i e s

JUST REMOVELEE BENCH PLATE

Lee Reloading Stand At last, a reloading stand built just for your reloading needs. The sturdy

powder coated steel stand places your press at the perfect counter stool

or standing height. Three-leg design assures absolute stability regardless

of the floor condition. Rubber tipped legs suitable for any surface.

The thick steel top is fitted with the patented, quick

change Lee Bench Plate System with steel base block

to fit all Lee metallic presses.

The stand also includes a sturdy steel shelf

with two bench plate receivers that will

neatly and securely store your extra

presses or mountable accessories.

Each leg has eight mounting holes

that allow you to accessorize your

stand with a multitude of bins,

shelves or accessory racks.

Dimensions 39” high x 26” wide x 24” deep

90688 172.00

Die Rack

Sturdy steel rack with fasteners designed for the Lee

Reloading stand. Conveniently holds your dies at the

ready, especially helpful when loading small batches

of ammo with frequent die changes. Can also be wall

or bench mounted.

90680 14.00

Bin and BracketSturdy steel bracket and parts bin. Includes fasteners

to allow direct mounting to the Lee Reloading stand,

or workbench. Perfect for holding bullets, cases and

loaded rounds.

90687 14.00

Steel Base Block

Rigid, powder coated steel construction.

First choice for mounting all current Lee Presses.

Works with the Lee Reloading Stand and Bench Plate.

Fasteners for mounting one Lee reloading press

are included.

90267 15.00

CONCRETE BLOCK NOT INCLUDED

RELOADING STAND | BENCH PLATE

ReLOADinG21

5

MODERN RELOADING 2nd ED.

TE

LEARN TO RELOAD AMMUNITION THAT’S MORE ACCURATE

THAN FACTORY NEW ON YOUR FIRST TRY

The Second Edition of MODERN RELOADING is a sum-mary of a lifetime of experience. No matter how knowledgeable you are, you will find new and interesting information in this book. It is a refer-ence book you will keep forever.

OVER 38,000 LOADS covering over 170 cartridges in a new, larger, easier to read format, with velocities for starting loads. This is the best kind of load data — it is supplied by the powder companies.

LOAD DATA SORTED by velocity decending order.

DIPPER, AUTO DISK DATA included for easy setup.

NEW, LARGER, EASIER TO READ FORMAT

with computer rendered and dimensioned drawings. Cartridges tabbed for quick reference.

LATEST INFORMATION ON PRESSURE

EXCLUSIVE PRESSURE AND VELOCITY FACTORS enable you to accurately calculate pressure and velocity for reduced loads. An absolute necessity for cast bullet shooting.

A NEVER BEFORE PUBLISHED in depth analyses of current load data. It gives you insight into the effects of reducing or increasing a charge.

SECOND EDITION BY RICHARD LEE

MODERN RELOADINGMODERN RELOADING2019

LEE PRECISION 2016

Auto Bench Prime

While we worked on the design of the tray and adapters for the New Auto Prime,

we realized these parts would be perfect for a product that was envisioned

years ago; the Auto Bench Prime. We introduced the tool with a small ad in the

aMerican rifleMan magazine, and it was an immediate success. Customers

are amazed at how effortlessly and conveniently it works. I am quite sure

this tool will become our most popular priming tool. The tool is so effortless

to use, even the oldest

arthritic hands easily

operate the lever. While

we call it the Auto

Bench Prime, mounting

it to a ¾ inch board

makes it very portable,

and the lightest of

tables or your lap will

suffice. There is no tool,

hand held or bench

mounted, that is faster

or more convenient

than the Lee Auto

Bench Prime. The tool

uses the same standard inexpensive priming tool shell holders, so there is no

need to endlessly swap shell holders from your reloading press.

The Auto Bench prime uses a tray

to feed primers. Lee users know how

fast and convenient using a tray is

compared to filling a primer tube

one primer at a time. The new tray

included with our priming tools is a

marvel of simplicity. The folding tray

does not require a separate cover

and has a built in flipping surface to

quickly right your primers. The cover

latch doubles as an “on/off ” valve.

You can refill from the largest box of primers and begin priming in seconds.

If you want extra trays we offer them in two packs. They are priced less than

what we used to charge for a cover alone. The on/off feature works so well

we now use the folding tray on all of our presses.

Auto Bench Prime # 90700

Folding primer tray

5/11/16 3:57 PM

CAUTION with NEVER EXCEED LOADS, maintain Minimum Overall Length or larger e = European

DBLD = Double Disk. See instructions with your Auto-Disk Powder Measure c = Compressed charge

2 SCOOPS = Use TWO dippers of powder in each round. NA = None Available

Copyright 08-09-2011 Lee Precision, Inc. Hartford WI 53027

7mm REmINGTON mAGNUm

POWDER TYPESTART

GRAINSSVOLUME

CCAUTO DISK

LEEDIPPER

VELOCITYF P S

NEVEREXCEED

VELOCITYF P S

PRESS UNITSMINO A L

1 GRAIN FACTOR

VELOCITY PRESSURE

· START ING LOADS ·

100 Grain Jacketed Bullet

IMR4831 67.0 4.92 2 SCOOPS 2.20 3318 72.0c 3592 59400 PSI 3.150 .9842 .9633

IMR4350 66.0 4.85 2 SCOOPS 2.20 3312 70.5 3569 59000 PSI 3.150 .9836 .9613

HYBRID100 62.0 4.50 NA 4.30 3290 68.0 3547 58700 PSI 3.150 .9875 .9720

IMR4895 57.0 4.15 NA 4.00 3288 61.2 3538 59400 PSI 3.150 .9827 .9561

IMR4064 57.0 4.25 NA 4.00 3318 61.5 3528 58600 PSI 3.150 .9865 .9653

H414 60.0 3.97 NA 4.00 3216 66.0 3499 57598 PSI 3.150 .9859 .9660

H4831 71.0 5.15 2 SCOOPS 2.50 3316 75.0c 3499 59006 PSI 3.150 ---- ----

H4350 65.0 4.71 2 SCOOPS 2.20 3334 69.0 3494 58185 PSI 3.150 .9885 .9748

H-VARGET 53.0 3.87 NA 3.70 3193 59.0 3487 58419 PSI 3.150 .9854 .9625

IMR7828 72.0 5.22 2 SCOOPS 2.50 3267 75.0c 3421 54100 PSI 3.150 ---- ----

ACCUR 3100 65.3 4.88 2 SCOOPS 2.20 2964 72.5c 3368 58800 PSI 3.280 ---- ----

ACCUR 4350 60.3 4.46 NA 4.30 2944 67.0 3345 60300 PSI 3.280 ---- ----


RELODER 17 59.8 4.17 NA 4.00 3152 68.0 3535 NA NA 3.200 ---- ----

RELODER22 66.0 4.60 2 SCOOPS 2.20 3124 75.0 3503 NA NA 3.200 ---- ----

RELODER19 65.1 4.60 2 SCOOPS 2.20 3111 74.0 3489 NA NA 3.200 ---- ----

HYBRID100 62.0 4.50 NA 4.30 3203 68.0 3465 59500 PSI 3.250 .9870 .9678

IMR4831 67.0 4.92 2 SCOOPS 2.20 3249 71.3 3456 59700 PSI 3.250 .9858 .9649

IMR 4007 SSC 63.5 4.60 2 SCOOPS 2.20 3256 67.5 3452 60000 PSI 3.250 .9855 .9592

IMR4350 65.0 4.78 2 SCOOPS 2.20 3205 69.8 3442 59000 PSI 3.250 .9854 .9649

H414 62.0 4.10 NA 4.00 3250 65.5 3395 59123 PSI 3.250 ---- ----

IMR7828 72.0 5.22 2 SCOOPS 2.50 3230 75.0c 3386 56700 PSI 3.250 ---- ----

IMR4064 56.0 4.17 NA 4.00 3214 60.5 3369 59400 PSI 3.250 .9895 .9754

H4831 68.0 4.93 2 SCOOPS 2.20 3213 73.0c 3367 58302 PSI 3.250 .9908 .9759

H4350 65.0 4.71 2 SCOOPS 2.20 3233 68.5 3357 58067 PSI 3.250 ---- ----

H-VARGET 54.0 3.95 NA 3.70 3174 58.5 3356 59006 PSI 3.250 .9878 .9736

IMR4895 56.0 4.08 NA 4.00 3210 59.9 3350 58800 PSI 3.250 .9890 .9718

RELODER15 51.0 3.60 NA 3.40 2904 58.0 3256 NA NA 3.200 ---- ----


HYBRID100 60.0 4.36 NA 4.30 3102 66.0 3354 58500 PSI 3.200 .9870 .9692

Useful case capacity 5.27 cc

111

CHAPTER 10

HS7 22VEC SP3 22v-N105 22ACCUR #9 23IMR 4166 23ALNT 410 23HERC 2400 24ACCUR 4100 25H LIL GUN 25SR4759 25R ENFORCER 25v-N110 25ALNT 300 MP 26H110 26WIN 296 26H4227 27IMR4227 27AR2205 27ACCUR 5744 28ACCUR 1680 29LT-32 29v-N120 30LT-30 31H4198 31IMR4198 31AR2207 31VEC TU2000 31NORMA 200 31ACCUR 2200 32RELODER 7 32H322 33ACCUR 2015 34ALNT AR-COMP 34BENCHMARK 35IMR3031 35ACCUR 2230 36RELODER 10 36X-TERMINATOR 36NORMA 201 36v-N130 37ACCUR 2460 38VEC SP10 38BL-C(2) 39CFE 223 39H-LVR 39v-N133 39WIN 748 39ACCUR 2495 40ALNT VARMINT 40RELODER12 40H335 40IMR 8208 XBR 40AR2206 40RAM TAC 40VEC SP9 40NORMA 202 40H4895 41ACCUR 25204 42H-VARGET 42IMR4895 42

POWDER BURNING RATE CHART

A NITRO100 1VEC BA10 2v-N310 2WIN AA LITE 2TITEWAD 3R COMPETITION 3wSUPER-TAR 4CLAYS 5VEC TU7000 5BULLSEYE 6HP38 7RAM ZIP 7WIN 231 7SOLO 1000 8ALNT E3 8IMR 700X 8ACCUR #2 9RED DOT 9TITEGROUP 9MS200 9WIN AA PLUS 9IMR TRAIL BOSS 10WIN SUPER HANDI 11ROYAL SCOT 12AMER-SELECT 12INTERNATIONAL 12v-N320 12wSUPER-LIT 12GREEN DOT 13AS50 13R SILHOUETTE 13IMR PB 14R TRUE BLUE 14WIN ACTION PI 14ACCUR #5 15v-N330 15UNIQUE 17UNIVERSAL 17SR7625 17VEC BA9 17IMR 4451 18POWER PISTOL 18CFE PISTOL 18HS6 18MP200 18VEC AO 18v-N340 18AUTOCOMP 18SOLO 1500 19HERCO 19IMR 800X 19SR4756 19VEC SP8 19v-3N37 19wSUPER-FLD 19ACCUR #7 20BLUE DOT 20v-N350 20LONGSHOT 21ALLIANT STEEL 22

AR2208 42VEC SP7 42V-N530 42IMR4064 43v-N135 44ACCUR 4064 45RELODER15 45IMR4320 45H380 47IMR 4007 SSC 47VEC TU5000 47v-N140 47RAM BIG GAME 48ACCUR 2700 49H414 49v-N540 49RELODER 17 50IMR4350 50AR2209 50v-N150 50NORMA 203B 50NORMA 204 50WIN 760 50WIN 572 50ACCUR 4350 51H4350 51NORMA URP 51v-N550 52HYBRID100 53R HUNTER 53v-N160 54ACCUR 3100 55ALNT 4000 MR 55RELODER19 55H450 55H4831 55IMR4831 55AR2213 55H-SUPRFORM 56v-N560 56NORMA 217 57SUPRM780 57WIN MAG RIFLE 57RELODER22 58VEC TU8000 59v-N165 59IMR7828 50NORMA MRP 60ACC MAG PRO 61IMR 7977 62H1000 62RAM MAGNUM 62RELODER 25 63H RETUMBO 63ACCUR 8700 64v-N170 64H870 65H 50 BMG 66HO US869 66

Modern Reloading Second Edition 90277 30.98

Contains everything about reloading, with the world’s most comprehensive load data,

over 38,000 loads

CAUTION with NEVER EXCEED LOADS, maintain Minimum Overall Length or larger e = European

DBLD = Double Disk. See instructions with your Auto-Disk Powder Measure c = Compressed charge

2 SCOOPS = Use TWO dippers of powder in each round. NA = None Available

Copyright 08-09-2011 Lee Precision, Inc. Hartford WI 53027

7mm REmINGTON mAGNUm

· START ING LOADS ·

POWDER TYPESTART

GRAINSSVOLUME

CCAUTO DISK

LEEDIPPER

VELOCITYF P S

NEVEREXCEED

VELOCITYF P S

PRESS UNITSMINO A L

1 GRAIN FACTOR

VELOCITY PRESSURE


IMR 4007 SSC 60.6 4.39 NA 4.30 3157 64.5 3320 59500 PSI 3.200 .9870 .9641

H4350 62.0 4.50 NA 4.30 3089 66.0 3281 59006 PSI 3.200 .9850 .9660

H414 59.0 3.90 NA 3.70 3071 63.5 3267 59123 PSI 3.200 .9863 .9756

H4831 65.0 4.71 2 SCOOPS 2.20 3060 69.7 3257 59358 PSI 3.200 .9869 .9716

H-VARGET 53.0 3.87 NA 3.70 3068 56.5 3245 49800 PSI 3.200 .9839 .9702


RAM MAGNUM 71.1 4.70 2 SCOOPS 2.20 3021 79.0 3357 56430 PSI 3.285 ---- ----

HYBRID100 60.0 4.36 NA 4.30 3092 65.5 3327 59600 PSI 3.230 .9867 .9689

ACCUR 3100 64.2 4.80 2 SCOOPS 2.20 2926 71.3c 3325 59900 PSI 3.260 ---- ----

R HUNTER 60.4 4.03 NA 4.00 2970 67.1 3300 58290 PSI 3.200 ---- ----

IMR 4007 SSC 60.0 4.35 NA 4.30 3085 63.8 3278 59500 PSI 3.230 .9840 .9543

H414 61.0 4.03 NA 4.00 3126 64.5 3261 59475 PSI 3.230 ---- ----

IMR7828 68.0 4.93 2 SCOOPS 2.20 3044 72.5 3261 59100 PSI 3.230 .9848 .9635

IMR4350 62.0 4.56 NA 4.30 3050 66.5 3251 59000 PSI 3.230 .9858 .9635

H4831 65.0 4.71 2 SCOOPS 2.20 3095 68.5 3236 59358 PSI 3.230 ---- ----

IMR4831 64.0 4.70 2 SCOOPS 2.20 3040 68.2 3231 58500 PSI 3.230 .9855 .9692

H4350 62.0 4.50 NA 4.30 3106 65.0 3226 58771 PSI 3.230 ---- ----

H-VARGET 53.0 3.87 NA 3.70 3021 57.0 3218 59710 PSI 3.230 .9843 .9707

ACCUR 4350 56.7 4.20 NA 4.00 2829 63.0 3215 57800 PSI 3.260 ---- ----

IMR4064 54.0 4.02 NA 4.00 3062 58.2 3212 59400 PSI 3.230 .9887 .9715

IMR4895 54.0 3.93 NA 3.70 3049 57.9 3189 58700 PSI 3.230 .9884 .9704


RELODER22 61.6 4.29 NA 4.30 2956 70.0 3314 NA NA 3.285 ---- ----

RELODER19 60.7 4.29 NA 4.30 2916 69.0 3270 NA NA 3.285 ---- ----

RELODER 17 55.9 3.89 NA 3.70 2903 63.5 3255 NA NA 3.200 ---- ----

IMR7828 65.0 4.71 2 SCOOPS 2.20 2943 70.0 3159 59300 PSI 3.185 .9858 .9695

HYBRID100 57.0 4.14 NA 4.00 2931 62.5 3157 59000 PSI 3.185 .9867 .9682

ACCUR 3100 61.0 4.56 NA 4.30 2776 67.8 3155 59000 PSI 3.245 ---- ----

IMR4350 60.0 4.41 NA 4.30 2964 64.0 3131 59300 PSI 3.185 .9863 .9691

IMR4831 62.0 4.56 NA 4.30 2971 66.3 3125 59800 PSI 3.185 .9884 .9732

IMR 4007 SSC 57.3 4.15 NA 4.00 2964 61.0 3122 59500 PSI 3.185 .9859 .9697

ACCUR 4350 55.8 4.13 NA 4.00 2735 62.0 3108 58400 PSI 3.245 ---- ----

H4350 58.0 4.21 NA 4.00 2953 61.5 3082 59592 PSI 3.185 .9879 .9666

H414 59.0 3.90 NA 3.70 2985 61.0 3064 57950 PSI 3.185 ---- ----

H4831 63.0 4.57 NA 4.30 2952 66.0 3051 58888 PSI 3.185 ---- ----

RELODER15 48.4 3.42 NA 3.40 2719 55.0 3049 NA NA 3.285 ---- ----

IMR4064 52.0 3.87 NA 3.70 2904 55.4 3048 59600 PSI 3.185 .9860 .9618

H-VARGET 51.0 3.73 NA 3.70 2877 54.0 2998 57950 PSI 3.185 ---- ----


ACCUR 3100 61.2 4.58 2 SCOOPS 2.20 2721 68.0 3092 58200 PSI 3.270 ---- ----

ACCUR 4350 54.9 4.06 NA 4.00 2665 61.0 3028 54900 PSI 3.270 ---- ----


ACC MAG PRO 66.3 4.40 NA 4.30 2952 73.7 3220 60300 PSI 3.270 ---- ----

RELODER 25 62.9 4.45 NA 4.30 2830 71.5 3173 NA NA 3.280 ---- ----

v-N560 59.3 4.09 NA 4.00 2795 67.3 3169 NA NA 3.268 ---- ----

R HUNTER 55.8 3.72 NA 3.70 2787 64.0 3144 60300 PSI 3.240 ---- ----

HYBRID100 57.0 4.14 NA 4.00 2895 63.0 3138 59800 PSI 3.250 .9867 .9677

SUPRM780 65.1 4.46 NA 4.30 2976 69.3 3134 58000 PSI 3.250 .9877 .9676


LEE PRECISION, INC.

SELECTING THE BEST HANDGUN DIE SETLee handgun dies feature a carbide sizing die —

simply the best way to resize straight walled handgun cartridges.

Select the Deluxe Pistol 4-die set when using mixed range brass. The Deluxe Set includes the Carbide

Factory crimp die. This die allows you to separate bullet seating from the crimping operation. It makes setup much

easier and the die has the added feature of a carbide resizer that does a finishing sizing pass on the completed round.

This final sizing guarantees that any case that passes through the die will freely and reliably chamber in any gun.

The carbide & steEl three die sets work fine when using a quality controlled source of brass, like cases

fired only in your gun. More care is required when adjusting the bullet seat and crimp die, as seating and crimping

occur simultaneously. Bullet diameter control is important when not using the factory crimp.

CARBIDE FACTORY CRIMP DIE carbide

factory crimp die

HARDENED STEEL

SHELLHOLDER

Others charge $14.50 for this item!

POWDER MEASURE & CHARGE TABLE

Exclusive feature to Lee

Exclusive feature to Lee

Only Lee Dies permit

charging the case while

expanding the case mouth.

Every Lee Pistol Die Set includes

this Powder Through

Expanding Die at no extra

cost. The powder funnel adapter

can be replaced with a Lee case

actuated Powder Measure

(pg. 33) for fully automatic

powder charging while the case

mouth is being expanded.

BULLET SEAT & FEED DIE

Carbide SizerAll Lee straight walled pistol dies have tungsten

carbide sizer rings. Carbide is so hard that it can

only be ground and polished

with diamond wheels.

This hard diamond polished surface eliminates

the need for case lubrication—they will never

wear out. Exclusive contour grind sizes closer to

the rim than any other brand.

The collet held decapper is nearly unbreakable

even if you misadjust it or deprime crimped

military cases.

The decapper clamp collet accurately centers

the decapper in the die. Should you over stress

it for any reason, it harmlessly slides up without

breaking. Easily reset with no limit to the amount

of times it can be reset.

Bullet Seat and Feed DieUniversal free floating

seating plug works with

nearly any point style bullet.

No need to change seater

plugs for different nose

types. Finger adjustable

seating depth eliminates

fumbling with pliers, lock

nuts and screwdrivers to

make simple seating depth

adjustment. Die is tapered on

end for use with automatic

bullet feeders.

Lee Dies reload cartridges better, easier, more accurately and with fewer problems!

ONLY LEE DIES COME COMPLETE WITH POWDER MEASURE and CHARGE TABLE

LEELEEexclusive feature

POWDER

THROUGH EXPANDING DIE

6

Carbide ring in base resizes any

portion of case that exceeds fac-

tory new dimensions. Floating

crimp ring is finger adjustable

to provide the perfect crimp.

Keep yourdies set, and at the ready

in the 4-die box.

CONTOUR GROUND CARBIDE SIZING DIE

RELOADING DIES shown with

COLOR CODED SPLINE DRIVE BUSHINGS installed.

See page 8

PISTOL RELOADING DIES

ReLOADinG21

Lee Carbide Pistol 3-Die Set 44.98

INCLUDES CARBIDE FULL LENGTH SIZING DIE, POWDER THROUGH EXPANDING DIE AND BULLET SEAT AND FEED DIE.

We use a solid carbide insert, ground to a special contour that does

not leave the objectional belt mark on the case, common to ordinary

carbide dies. With a carbide sizer, no case lube is needed, and you

don’t even have to clean your cases.

NO NEED FOR A TAPER CRIMP DIE; BETTER ACCURACY WITH LEE DIES.

Taper crimp dies are used to correct the problems caused by the

improper expanding plug design or adjustment. They distort the

bullet shank and reduce accuracy. Because the Lee Expander flares

the minimum amount, consistent with easy bullet insertion, all of

the flare is removed with the bullet seating die, thus eliminating

the need for a taper crimp die.

Lee Steel Pistol 3-Die Set 44.98

INCLUDES STEEL FULL LENGTH SIZING DIE, POWDER THROUGH EXPANDING DIE, BULLET SEAT AND FEED DIE, AND RESIZING LUBRICANT PACKET

Same features as our premium carbide sets, except the case

must be lubricated.

Lee Deluxe Pistol 4-Die Set 69.98INCLUDES CARBIDE FULL LENGTH SIZING DIE, POWDER THROUGH EXPANDING DIE, BULLET SEAT AND FEED DIE AND CARBIDE FACTORY CRIMP DIE.

Combines the world’s most popular carbide three-die set with

the Lee Carbide Factory Crimp Die at a great price. No other

die set at any price produces more reliable or accurate ammo.

By separating the seating and crimping operation, you will

benefit by greatly simplified adjustment. More importantly, the

Carbide Factory Crimp Die post sizes your case, assuring that

any round that passes through the die will chamber properly in

your gun. This, plus all the other exclusive features — make this

the best die set money can buy!

PISTOL DIE SETS

7

STORAGE IS EASYLee Dies are packed in a

fitted box that allows dies to be returned to the box adjusted with or without the

Lee Breech Lock bushing OR SPLINE DRIVE bushing INSTALLED

CR

IMP

ST

YL

E

CA

RB

IDE

FAC

TOR

Y

CR

IMP

DIE

SH

OR

T B

OT

TLE

NEC

K

CO

LLET

ST

YLE

FA

CTO

RY

CR

IMP

DIE

CO

LLET

ST

YLE

FA

CTO

RY

CR

IMP

DIE

TAP

ER C

RIM

P D

IE

5.7x28 FN N/A 90725 N/A N/A

22 TCM N/A 90087 N/A N/A

30 M1 Carbine · 32/20 N/A N/A 90421 N/A

30 Luger N/A 90175 N/A N/A

30 Tokarev & 30 Mauser N/A 90086 N/A N/A

32 ACP · 32 S&W Long 32 H&R Mag · 327 Federal

ROLL 90067 N/A N/A N/A

9mm Makarov TAPER 90807 N/A N/A N/A

9mm Luger TAPER 90860 N/A N/A 90780

357 Sig N/A 90076 N/A N/A

38 Super & 38 ACP TAPER 90866 N/A N/A 90780

380 Auto TAPER 90867 N/A N/A 90780

38 Special ROLL 90861 N/A N/A 90781

357 Magnum ROLL 90861 N/A 90813 90781

40 S&W & 10mm Auto TAPER 90862 N/A N/A 90782

41 Magnum ROLL 90416 N/A N/A N/A

44 Special ROLL 90863 N/A N/A 90784

44 Magnum ROLL 90863 N/A 90930 90784

44 Russian ROLL 90863 N/A N/A N/A

45 Colt ROLL 90865 N/A 90302 90786

45 ACP · 45 Auto Rim · 45 GAP · 45 Win Mag TAPER 90864 N/A N/A 90785

400 CorBon N/A 90173 N/A N/A

455 Web Mark II N/A N/A N/A 90785

454 Casull ROLL 90865 N/A N/A 90786

460 S&W N/A N/A 90926 N/A

500 S&W N/A N/A 90931 N/A

Taper Crimp DieThe Lee Taper Crimp Die is hardened steel, designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used with 1986 or newer Lee Dies. Jacketed bullets must have a crimp groove.

TAPER CRIMP DIE 13.98

Collet Style Factory Crimp DiePopular with cast bullet shooters that wish to use oversize bullets; also very popular when reloading heavy recoiling revolvers. No other crimping system can apply as secure a crimp at the Lee Collet style Factory Crimp Die. No crimping groove required in jacketed or cast bullets, this die is so powerful it forms a crimp groove if one is not present.

COLLET STYLE CRIMP DIE 15.98

Short Bottle Neck Collet Style Factory Crimp DieIncorporates a collet to apply a rifle type crimp to the case. Makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the collet is so powerful it will form one.BOTTLE NECK PISTOL FACTORY CRIMP DIE

25.00

CARBIDE FACTORY CRIMP DIE

FOR HANDGUN AMMUNITION THAT MUST WORK

Lee Carbide Factory Crimp Die

A CARBIDE SIZER SIZES THE cartridge while being crimped, so every round will positively chamber freely with factory like dependability. The adjusting screw quickly and easily sets the desired amount of crimp. It

is impossible to buckle the case as with a conventional bullet seating die. Trim length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered.Revolver dies roll crimp with no limit as to the amount. A perfect taper crimp is applied to auto-loader rounds. The crimper cannot be misadjusted to make a case mouth too small to properly head-space. A firm crimp is essential for

dependable and accurate ammunition—it eliminates the problems of poor ignition of slow burning magnum powders.

CARBIDE FACTORY CRIMP DIE

26.98

PISTOL RELOADING DIES

INCLUDED +with+ DELUXE4-DIE SETS


LEE PRECISION, INC.

DEL

UXE

PIST

OL

4-D

IE S

ET

| P

7

CARB

IDE

3-D

IE S

ET

| P

7

STEE

L 3-

DIE

SET

|

P 7

SIZ

ING

DIE

ON

LY

POW

DER

TH

ROUG

H E

XPAN

DIN

G D

IE

TAPE

R CR

IMP

DIE

|

P 9

FACT

ORY

CRI

MP

DIE

|

P 9

COLL

ET S

TYLE

CRI

MP

DIE

|

P 9

CASE

LEN

GTH

GAU

GE

| P

29

UNIV

ERSA

L SH

ELLH

OLD

ER

| P

7

PRIM

ING

TOO

L SH

ELLH

OLD

ER

| P

31

QUI

CK T

RIM

DIE

BO

DY

| P

28

69.98 44.98 44.98 28.98 13.98 13.98 20.00–

26.98 15.98 7.50–

12.00 5.98 2.98 15.00–

20.00

22 TCM [ 2-Die Set ] 90803 91032 N/A 90087 90521 90204 91373

5.7 x 28 [ 2-Die Set ] 90603 91129 N/A 90725 90219 90002 90017 91363

25 ACP 90568 91204 91141 90002 90017

30 M1 Carbine 90626◊ 90617◊ 90494 90421 90135 90524 90207 90365

30 Luger 90754 91212 91142 90175 90004 90023

30 Mauser 90755 91213 91142 90086 90004 90023

7.62 Tokarev 90769 91214 91142 90086 91336 90004 90023

32 ACP 90622 90621 91144 90067 91338 90524 90207

32 S & W 90696 91205 91144 91311 90521 90204

32 S & W Long � 90624 90621 90490 90067 90169 90521 90204

32 H & R Mag /327 Federal 90809 90621 91162 90067 9131091303

90521 90204

32/20 90751 91221 91145 90421 90146 90523 90206

38/40 90761 91215 91146 90852 90001 90272

9mm Makarov 90176 91206 91147 90807 90684 90004 90023 90181

9mm Luger 90963 90509 90548 90580 90780 90860 90153 90004 90023 90032

357 Sig 90270 91216 91148 90076 91317 90004 90023

38 Short / Long Colt 90276 91207 91149 91321 90518 90201

38 Super / 38 ACP 90623 90619 91168 90780 90866 90217 90004 90023

380 Auto 90447 90625 90618 90492 90780 90867 90155 90521 90204 90025

38 S & W 90569 90619 91149 90156 90518 90201

38 Special / 357 Magnum � 90964 90510 90530 90581 90781 90861 9015790158 90518 90201 90085

90088

40 S & W / 10mm Auto 90965 90799 91208 90620 90782 90862 9015490127 90004 90023 90033

90193

41 Mag 90628 91220 91169 90416 90159 90526 90209 90226

429 Desert Eagle 90796 91504 91171 90528 90211

44 Special / 44 Magnum 90966 90516 90531 90583 90784 90863 9016090161 90528 90211 90107

90125

44 Russian 90293 90531 91152 90863 90528 90211

44/40 90564 91217 91153 90854 90168 90001 90272

45 Colt 90967# 90514# 90533 90586 90786 90865 90302 90163 90528 90211 90145

45 ACP 90968 90513 90532 90585 90785 90864 90162 90519 90202 90073

45 Auto Rim 90808 90532 90585 90785 90864 90199 90213

45 Schofield 90323 90533 91154 90785 90001 90272

400 Cor Bon 90430* 91218 91155 90173 90519 90202

455 Web Mark II 90764 90533 91156 90785 90522 90205

45 Win Mag 90810 90532 90585 90785 90864 90520 90203

454 Casull 90795 90533 90586 90786 90865 90992 90528 90211 90174

45 Gap 90498 90532 91156 90864 91473 90519 90202

460 S & W 90344 91209 91157 90926 90220 90001 90272

480 Ruger ‡ 90499 91210 91158 91242 90018 90522 90205

50 Action Express 90329 91219 91159 91327 90528 90211

500 S&W Mag 90288 91211 91159 90931 90019 90003 90200 90178

� Can be used to load magnum cases � Can be used to load maximum cases ‡ can be used to load the 475 Linebaugh #can be used to load the 454 Casull ◊ 30 M-1 Carbine $18.00 extra

* These dies do not include load data S/O Special Order Factory Direct

FREE SHELLHOLDER included where shown

The price of Lee Dies include a FREE

SHELL HOLDER of the proper size.

Some manufacturers charge $14.50

extra for this necessary part.

HAVE A BREECH LOCKPRESS?Breech lock bushings

fit all Lee Breech

Lock presses. Allows

instant, accurate die

changes.

Breech Lock Bushings

90600 2-Pk 11.98Perfect with Lee Lock Rings

Spline DriveBushingsBreech lock quick change bushing with integral lock collar provides unmatched precision and convenience when adjusting dies. Split clamp positively locks die into position.

90063 2-Pk

16.00 Buy more for greater savings

90042 3-Pk

21.00

90095 4-Pk

25.00

COLOR CODEDFOR QUICK,

POSITIVE DIE SELECTION

LEE PISTOL DIES

9

ReLOADinG21

SHELLHOLDER

FOR PRESSES

5.98

#1 90518

#2 90519

#3 90520

#4 90521

#5 90522

#6 90523

#7 90524

#8 90525

#9 90526

#10 90527

#11 90528

#12 90529

#13 90199

#14 90001

#15 90002

#16 90003

#17 91497

#18 91498

#19 90004

#20 91499

#21 90599

#22 91500

#23 91501

#24 91502

#25 91503

NOT PURCHASING LEE DIES?

YOU'LL STILL NEED A SHELL HOLDERONLY LEE OFFERS A FREE SHELL HOLDER

WITH EVERY PISTOL DIE SET PURCHASE

[ OTHERS CHARGE $14.50 FOR THIS NECESSARY PART! ]

HOLDER PISTOL

15 5.7 x 281 22 Rem. Jet

15 25 ACP1 256 Win. Magnum

19 30 Luger19 30 Mauser4 32 Short Colt4 32 Long Colt4 32 S & W 4 32 S & W Long 7 32 ACP 4 32 Colt N.P. 4 380 Auto

19 9mm LUGER1 38 S & W1 38 Colt N.P.

19 38 Super Auto19 38 ACP1 38 Short Colt1 38 Long Colt1 38 Special · 357 Mag

19 357 Sig2 357 Auto Magnum

19 40 S&W · 10mm Auto1 41 Long Colt

19 41 Action Express9 41 Magnum

11 44 S &W Spl · 44 Mag11 44 S & W Russian2 44 Auto Mag.2 45 Auto

11&14 45 Colt11 454 Casull14 460 S&W5 455 Webley

13 45 Auto Rim3 45 Win. Magnum

5 &16 480 Ruger5 475 Linebaugh

16 500 S&W

Additional cartridges listed on www.leeprecision.com Round Die Box lets you store dies installed in 3-hole turret.

Lee Die BoxesPerfect storage for dies. Made from tough, durable plastic.SINGLE DIE BOX 90616 2.98ROUND DIE BOX 90535 6.50FLAT 3-DIE BOX 90791 4.98FLAT 4-DIE BOX 90422 5.98

Holds dies with Breech Lock Quick Change insert installed.

LEE ULTIMATE SPLINE DRIVE LOCK RINGS are the perfect choice when using older style presses

that require screwing your dies in and out for every operation. The new split clamp spline drive makes all

other lock rings obsolete and clumsy to use. The socket head cross bolt, even when lightly tightened,

applies a vise-like grip on your dies. No tiny set screws that easily strip or damage your die threads.

We added the famous Lee “O” ring because, no matter how securely you have the lock ring clamped to the die, it will loosen in the press frame during operation without the friction of the “O” ring. The “O” ring allows you to finger tighten into your press and will never loosen during operation. Kit includes a wrench for easy die removal.

Ultimate Lock Rings

90566 3 pack with wrench 10.98 91640 4 pack color coded. Lock ring wrench sold separately 14.98

Lock Ring Wrench

90093 2.98

A handy, compact wrench makes the new lock rings a delight to use. Spline drive lock rings are now standard equipment on all Lee dies. Update older Lee Dies or competitor’s dies.

SPLINE DRIVE Lock RingS (3-Pack)

90534 Lock ring wrench sold separately 4.98

NOW STANDARD ON ALL LEE DIES. These lock rings are perfect for presses equipped with Quick change die bushings or removeable die heads found on most progressive and our turret presses. Smallest

outside diameter lock rings available. Captive friction “O” ring provides immovable die position with just finger tightening. Handy, no tool required die adjustment.

Decapping DieAn absolute must for those who clean cases before reloading. No cleaning or lubing needed when using this die. Tough, almost unbreak able decapper easily removes crimped in primers. Fits cases up to .560” in diameter; up to 3.125” long.

90292 14.98

REPLACEMENT DECAPPER UNGUIDED 90783 2.50 GUIDED 4.00

For smooth operation and less decapper bending or breaking, order caliber specific guided decapper.

91574 17 CAL-204 RUGER91576 22 CAL 91577 6mm–25 CAL 91578 27 CAL -7mm

91580 30 CAL 91581 34–35 CAL 91583 40 CAL 91584 45 CAL

Set of ShellholdersEleven of the most popular sizes fit over 115 different cartridges. The chart ( left ) is included with each shell holder set.UNIVERSAL SHELL HOLDER SET

90197 47.00

WORKS WITH ALL BRANDS OF PRESSES

# 1 · 2 · 3 · 4 · 5 · 7 · 8 9 · 10 · 11 · 19

Lee Bulge Buster KitAssure your mixed brass is bulge free with the Bulge Buster Kit and appro priate Lee Carbide Factory Crimp Die. This push through die adapter will quickly remove the annoying bulge rings that shell holder constrained dies simply can’t reach. The Bulge Buster Kit includes extension sleeve, push through punch, catch container and complete instructions. And it’s fast — you can reprocess your cases as quickly as you can handle them. CARBIDE FACTORY CRIMP DIES, SEE PAGE 7

Bulge Buster Kit 90487 19.98

BULGE BUSTER KIT shown mounted to Breech Lock

Reloader Press ( 90045 ). Sold separately, pg. 18

Utilize all your brass

by removing annoying

bulge rings

Push throughPunch

ExtensionSleeve

Cstch Container

90867 380 ACP90862 10 mm 90862 40 S&W90416 41 AE

90864 45 ACP90864 45 GAP90864 45 Win Mag

WITH THE LEE FACTORY CRIMP DIE, THE BULGE BUSTER WILL REPAIR ALL THESE RIMLESS CASES

WORKS ON TIGHT TOOLHEADS

BIG GUN INSPIREDBREECH LOCK QUICK CHANGE NOW STANDARD ON ALLLEE SINGLE STATION PRESSESSwitch dies with a ⅙ of a turn rather than fourteen or more turns. Loading with a breech lock equipped press is as convenient as a Turret Press when loading small quantities of ammunition. Interrupted three-start thread assures dies will return and lock into the exact same position. If cost is more important than convenience, you can leave the Breech Lock bushing locked in the press and screw dies in and out like a conventional press.

Change dies instantly

with a twist of the wrist

Spline Drive BushingsBreech lock quick change bushing with integral lock collar provides unmatched precision and convenience when adjusting dies. Split clamp positively locks die into position.

90063 2-Pk

16.00

Buy more for greater savings

90042 3-Pk 21.00

90095 4-Pk25.00

Breech Lock Bushings Breech lock bushings fit all Lee Breech Lock presses. Allows instant, accurate die changes.

90600 2-Pk. 11.98

Color coded for quick, positive die selection

SPLINE DRIVE BUSHINGS +and+ LOCK RINGS

Universal Case Expanding DieGently flares the case mouth to accept cast bullets without shaving. Works great to prevent damaging the moly and low friction coatings found on today’s high performance jacketed bullets. Includes neck plugs for .22 cal through .45 cal. Works on everything from the 22 Hornet to the largest Ultra Mag. Costs so little and works so well you can’t afford to be without one.

90798 16.98


LEE PRECISION, INC.

Lee Collet Necksizing DiesFor best accuracy, longest case life and no resizing lubricant. Only the neck of the case is resized. The body is untouched—retains perfect fit to your gun’s chamber. Cases should have been fired in your firearm only. Benchrest shooters’ first choice; there is no other die that can produce a more accurate cartridge.

If you intend to reload cases fired in other guns

or you are reloading for more than one gun,

s e l e c t t h e

Lee Ultimate Rifle Die Set

The Ultimate Set includes a full length resizing die that allows

you to restore any case to factory original dimensions so that

you can fire form in your gun and then reload using the superior

Collet neck sizing die. Ultimate Rifle Die Sets include the LEE

FACTORY CRIMP DIE.

SELECTING THE BEST RIFLE DIE SET

RGB DIESsee page 12

PACESETTER DIES page 12

Free shell holder SOME CHARGE OVER $14.50 FOR THIS NECESSARY PART

Free comprehensive load data PRICELESS ON SOME CARTRIDGES

Free powder dipper

Easiest to adjust dies WITH FINGER TIGHTEN LOCK RINGS

Built-in stuck case remover

case sizing lubricantINCLUDED WITH PACESETTER & ULTIMATE DIE SETS

Tightest tolerance IN THE INDUSTRY

Exclusive featurePACESETTER AND ULTIMATE DIE SETS

INCLUDE FACTORY CRIMP DIE; THIS DIE FIRMLY CRIMPS BULLET IN PLACE

AND APPLIES A FACTORY-STYLE CRIMP

Lee Pacesetter & RGB Series Dies

FOR PRODUCING

FACTORY-DIMENSIONED

AMMO THAT RELIABLY

FITS AND FEEDS

IN ANY GUN

First choice for semi-auto actions. Full-length sizing is a must if you are reloading for more than one firearm or reloading cases that were fired in other firearms. Pacesetter 3-die sets include the LEE FACTORY CRIMP DIE.

NO TOOL REQUIRED

FINGER ADJUSTABLE

BULLET SEATING

BUILT-IN STUCK CASE REMOVER

EXCLUSIVEFACTORY

CRIMP DIECASE SIZING LUBRICANT

LEE OFFERS THE MOST

COMPLETE DIE SETS

COLLETNECKSIZINGDIESsee page 13

ULTIMATE RIFLE DIE SET see page 13

11

ReLOADinG21

20 17 Hornet

4 17 Remington4 204 Ruger4 22 TCM

20 22 Hornet20 22 K Hornet3 22 Savage2 22 BR6 218 Bee

12 22 PPC3 219 Zipper

10 220 Swift4 221 Fireball4 222 Remington4 222 Rem. Magnum4 223 (5.56mm)5 223 WSSM2 224 Clark (22/257)

21 224 Valkyrie10 225 Winchester2 22/2502 240 Weatherby2 243 Win.5 243 WSSM2 6mm Remington2 244 Remington2 6mm Int’l2 6mm/2842 6mm/06

12 6 PPC4 6 x 47 (6mm/222M)2 25/2845 25/3032 25/066 25/20 Winchester

2 250 Savage3 25/354 25/45 Sharps2 257 Roberts5 257 Weatherby2 6mm Creedmoor2 6.5mm Creedmoor2 6.5mm 062 6.5mm x 573 6.5 x 55 Mauser

10 6.5 Jap5 6.5 Rem. Magnum2 6.5 Carcano

12 6.5 Grendel5 264 Win. Magnum5 26 Nosler

21 6.8 SPC2 270 Winchester5 270 Weatherby5 270 Win S Mag2 280 Remington2 7mm/082 7mm BR4 7mm TCU3 7 x 30 Waters

2 & 10 7 x 57mm Mauser5 7 x 61 Sharpe & Hart5 7mm Rem. Magnum5 7mm Win S Mag5 7mm Weatherby5 7mm Ultra Mag 2 284 Winchester 3 7.5mm Schmidt-Rubin7 30 M 1 Carbine

3 7.65x53 Arg. Mauser

12 7.62mm x 3916 7.62x54 Russian3 30 Herrett3 30/30 Win. (30 WCF)2 300 Savage

16 30/37821 30 Remington2 308 Win. (7.62 NATO)4 300 AAC Blackout5 30/40 Krag (30 U.S.)2 30/06 Springfield5 300 H & H5 300 Weatherby5 300 Win Magnum5 300 Ultra Magnum5 300 Win S Magnum 5 308 Norma Magnum5 303 British2 7.7 Japanese3 32 Win. Spc’l3 32 Win. S.L.6 32/20 (32 W.C.F.)3 32/40 Winchester2 8 x 57 Mauser2 8mm 062 8mm Man. Schoe.5 8mm Rem. Magnum

17 8mm Lebel16 8x56R Hungarian8 33 Winchester

25 338 Lapua5 338 Win. Magnum5 338 Ultra Magnum5 340 Weatherby8 348 Win.

2 35 Remington5 35 Winchester2 35 Whelen5 350 Rem. Mag.3 356 Winchester2 358 Winchester5 358 Norma Magnum3 375 Winchester5 375 H & H5 375 Weatherby5 375 Ultra Magnum5 375 Ruger

14 38/40 Win.3 38/55 Winchester8 40/82 Winchester5 416 Remington

25 416 Rigby18 43 Mauser17 43 Spanish14 44/4011 444 Marlin8 45/70 Gov’t2 450 Bushmaster

5 458 Win. MagnumHOLDER PISTOL

15 5.7 x 281 22 Rem. Jet


19 30 Luger19 30 Mauser4 32 Short Colt4 32 Long Colt4 32 S & W 4 32 S & W Long

7 32 ACP

4 32 Colt N.P.

4 380 Auto

19 9mm LUGER

1 38 S & W

1 38 Colt N.P.

19 38 Super Auto

19 38 ACP

1 38 Short Colt

1 38 Long Colt

1 38 Special · 357 Mag

19 357 Sig

2 357 Auto Magnum

19 40 S&W · 10mm Auto

1 41 Long Colt

19 41 Action Express

9 41 Magnum

11 44 S &W Spl · 44 Mag

11 44 S & W Russian

2 44 Auto Mag.

2 45 Auto

11&14 45 Colt

14 45 Schofield

11 454 Casull

14 460 S&W

5 455 Webley

13 45 Auto Rim

3 45 Win. Magnum

5 &16 480 Ruger

5 475 Linebaugh

16 500 S&W

HOLDER RIFLEHOLDER RIFLE HOLDER RIFLEHOLDER RIFLEHOLDER RIFLEHOLDER RIFLE HOLDER RIFLE HOLDER RIFLE HOLDER RIFLE HOLDER pistol

The Lee Factory Crimp Die is the only effective way to crimp

bottleneck rifle cartridges. Our Factory Crimp Die should be used on all

loads used for hunting. Applying a factory crimp will always improve the

utility of the cart ridge, and in most cases, will also improve the accuracy.

The Lee Factory Crimp die crimps the bullet in place

more firmly than any other tool. It is impossible to buckle

the case as with regular roll crimp dies. Trim length is

not critical. Tests demonstrate that even bullets which

have no cannelure will shoot more accurately if crimped

in place with the Lee Factory Crimp Die.

Factory ammunition is often more accurate and better

able to withstand rough handling because the bullet is

firmly crimped in place. A firm crimp improves accu racy

because pressure must build to a higher level before

the bullet begins to move. This higher start pressure

insures a more uniform pressure curve and less velocity

variation. Even powder selection is less critical. Until

now, handloaders seated the bullet to touch the rifling

to achieve similar results. This is not always possible nor

desirable. The Lee Factory Crimp Die is included at no

extra charge with Lee PaceSetter 3-Die Sets and Ultimate Rifle Die Sets.

It’s just another added value that only Lee Dies offer. LEE FACTORY CRIMP DIE 15.98

RIFLE FACTORY CRIMP DIES

Set of Shellholders Eleven of the most popular sizes fit over 115 different cartridges. Chart below included with each shell holder set.

# 1 · 2 · 3 · 4 · 5 · 7 · 8 · 9 · 1 0 · 1 1 · 1 9

SHELLHOLDER

FOR PRESSES

5.98

#1 90518

#2 90519

#3 90520

#4 90521

#5 90522

#6 90523

#7 90524

#8 90525

#9 90526

#10 90527

#11 90528

#12 90529

#13 90199

#14 90001

#15 90002

#16 90003

#17 91497

#18 91498

#19 90004

#20 91499

#21 90599

#22 91500

#23 91501

#24 91502

#25 91503

NOT PURCHASING LEE DIES? YOU'LL STILL NEED A SHELL HOLDERM0ST LEE RIFLE DIE SETS INCLUDE A FREE SHELL HOLDER. Others charge $14.50 for this necessary part!

UNIVERSAL SHELL HOLDER SET

90197 47.00Works with all brands of presses

FACTORY CRIMP DIE

NO CRIMP GROOVE REQUIRED —EVEN WITH JACKETED BULLETS


LEE PRECISION, INC.

ALL LEE DIES ARE MACHINE HONED TO THE

SMOOTHEST POSSIBLE FINISH Don’t confuse this with the surface polish that’s used by most manu fac turers. A polish simply makes a shiny surface. It’s like trying to sand wood without backing under the sandpaper. The surface in Lee dies is pro gres sively honed to a fine finish with no waves or ripples.

Lee Resizing Lubricant

ANOTHER FIRST BY LEE. We purchased the finest

automotive deep draw lubricant and had it custom pack-

aged exclusively for us. Lee lube is pleasant to handle

and you can thin it with water. Non-sticky, nonallergenic.

Very little is needed; it goes a long way. Eliminates stuck

and dented cases and makes sizing less work.2 OZ. TUBE 90006 4.98

I N C L U D E S

FULL LENGTH SIZER

EASY ADJUST DEAD LENGTH BULLET SEATING DIE

FACTORY CRIMP DIE

BUILT IN STUCK CASE REMOVER

RESIZING LUBRICANT PACKET

EASY X EXPANDER

SHELL HOLDER

POWDER DIPPER

LOAD DATA & INSTRUCTIONS

Lee PaceSetter™ 3-Die Set

THESE DIES ARE YOUR BEST BUY!

Lee PaceSetter 3-Die sets include the exclusive

Lee Factory Crimp™ Die to produce factory-like

ammunition with improved utility and accuracy.

The die set also includes an easy adjust dead

length bullet seater, shell holder, powder dipper,

load data—and all are packed in the nicest

storage box ever designed. The extras represent

a $32.00 value. Most are unavailable at any

price from other suppliers.

These are the most copied dies in the world. Each and every die comes with a written lifetime warranty, 2-year guarantee and guarantee of accuracy or your money back!

LEE PACESETTER 3-DIE SET 42.98

LEE PACESETTER 2-DIE SET 42.98

The same features as our PaceSetter 3-die

set, just in very limited production. Does not

include Factory crimp die; rather, a bullet seat

and crimp die.

i n c l u d e s t h e e xc l u s i v e L e e Fa c to r y C r i m p D i e

internal finishin the industry

bestbest

PACESETTER RIFLE DIES

REALLYGREAT

BUY!

RGB DiesRGB Dies Compare to other brands costing twice as much and you’ll recognize what a fantastic bargain they

are. We offer these only to show that when you buy Lee Dies —without all of the extras Lee customers have come to expect —the price is significantly lower, yet the quality

is the best. Our tolerance is 50% less than the advertised amount of a popular and expensive brand. We guarantee

these dies to be better than any other brand. If for any reason you’re not 100% satisfied—just return them to the factory with your sales slip and pay the difference of what you paid and the manufacturer’s catalog list price of the dies you want. We will ship them to you with our thanks for trying ours.

These dies are a Really Great Buy. They cost less, because like other die makers, we left out $32.00 worth of extras which are included in our PaceSetter™ dies. Do yourself a favor and check our PaceSetter dies.

RGB Series Dies only 27.98

Spline Drive BushingsBreech lock quick change bushing with integral lock collar provides unmatched precision and convenience when adjust-ing dies. Split clamp positively locks die into position.

90063 2-Pk 16.00


90042 3-Pk 21.00

90095 4-Pk 25.00

COLOR CODEDFOR QUICK,

POSITIVE DIE SELECTION

EXPANDER EasyXEasyX

THE LEE

LEE RIFLE DIES F E A T U R E

STURDY SHANK SO STRONG YOU CAN DRIVE OUT

A STUCK CASE WITHOUT DAMAGE

COLLET TYPE DECAPPER CLAMP. HOLDS EASY X EXPANDER PERFECTLY CENTERED IN THE DIE. ALLOWS

DECAPPER TO SLIDE HARMLESSLY UP PREVENTING DECAPPER BREAKAGE IF AN

OBSTRUCTION IS ENCOUNTERED

TAPERED AREA EXPANDS SUB CALIBERS

WHEN CASE FORMING.QUICKLY AND

EFFORTLESSLY REFORMS DENTED OR

SQUASHED NECKS

LONG GUIDED NECK EXPANSION AREA

LOCATED TO BEGIN EXPANDING

AS SOON AS THE NECK LEAVES THE DIE NEAR THE PRESSES’

MAXIMUM MECHANICAL

ADVANTAGE

SUPER STRONG INTEGRAL DECAPPER IS

IS ALMOST UNBREAKABLE

ReLOADinG21

NO LUBRICATION REQUIRED

GUARANTEED ACCURACY

EXTENDS CASE LIFE 10X

FASTEST TO USE

NO CLEANING OR LUBING REQUIRED

DIE SETS INCLUDE: COLLET NECK SIZING DIE, DEAD LENGTH BULLET SEATING DIE, SHELL HOLDER, POWDER DIPPER, CHARGE TABLE AND STORAGE BOX.

MOST CALIBERS NOT LISTED CAN BE CUSTOM MADE. SEE WEB FOR DETAILS: leeprecision.com/custom-collet-necksizing-die-set.html

GUARANTEED TO LOADTHE MOST ACCURATEAMMUNITION

+or+YOUR MONEY BACK

Lee Ultimate Rifle Die Set

Choose this die set for maximum versatility. The set features a

full length-resizing die to return brass to factory new dimensions,

perfect for reloading brass fired in other guns. The Collet Necksizing

die is used on your fire formed brass giving you best possible

accuracy. No case lube required and cases last almost forever. The

Easy Adjust Dead Length Bullet seating die foolproofs the bullet

seating adjustment, and assures perfect seating depth every time.

The Factory Crimp Die provides a secure crimp on bullets with

or without a crimp groove. In most cases, it helps accuracy by

providing a uniform higher start pressure and gives the finished

cartridge factory-like accuracy and dependability.

The set is complete with shell holder, powder measure and

famous Lee load data featuring all common brands of powder

organized in an easy to read logical format.

In addition to best accuracy, you get these benefits

NO CASE LUBRICATION REQUIRED WITH COLLET DIE

REDUCED OR ELIMINATES CASE TRIMMING

TEN TIMES INCREASED CASE LIFE

UNMATCHED SPEED AND CONVENIENCE

MINIMUM BULLET RUNOUT

MOST UNIFORM NECK TENSION

LEE ULTIMATE RIFLE DIE SET 69.00INCLUDES COMPLETE COLLET DIE SET PLUS FACTORY CRIMP DIE, FULL LENGTH RESIZING DIE & RESIZING LUBRICANT SAMPLE.

While competing in a regularly sanctioned 1000 Yard Match on July 25th, 1993, Robert Frey established a new 1000 yard world record. We’re honored he used the Lee Collet Die to

load his record setting ammunition. World record breaker Robert Frey commented: “The Lee Collet Neck Sizing Die enables me to get top accuracy from my rifles (match and hunting). The design principle of sizing

the case neck to a mandrel is unmatched for accuracy potential by any other dies. It is one of the best ways to make all of my rifles shoot their tightest groups.”

LEE COLLET DIES ACCURACY CONTRIBUTES TO WORLD RECORD

13

COLLET DIES +and+ ULTIMATE DIE SET

Lee Collet DiesThere is no loading system that will load more accurate

ammunition than Lee Collet Dies. We guarantee it in

writing with every set. No one but Lee has ever dared

make a guarantee like this — Smallest group size or

your money back. A collet squeezes the case neck

against a precision mandrel for a perfect bullet fit

with minimum run-out. No case lube is needed. Cases

last ten times longer, so the savings

on only 35 cases will pay for the dies.

Maximum accuracy is usually achieved by seating the

bullet out far enough to touch or almost touch the

rifling. This provides the shot start pressure normally

supplied by the crimp. That’s why a dead length bullet

seater is included to complete the most accurate

reloading system ever made. These dies size only

the neck to preserve the perfect fit of fire forming.

Only reload cases that have been fired in your gun.

Not recommended for autoloaders, slide or lever action

guns. See list of sizes on pages 14-15.

Lee Collet Die for neck sizing 43.98

RG

B D

IES

|

P 12

PAC

ESET

TER

3-D

IE S

ET

| P

12

PAC

ESET

TER

2-D

IE S

ET

| P

12

PAC

ESET

TER

VER

Y L

TD

. | P

12

PR

OD

UC

TIO

N

CO

LLET

DIE

SET

|

P 13

ULT

IMAT

E R

IFLE

DIE

SET

| P

13

CO

LLET

NEC

K S

IZIN

G D

IE

| P

13

.002

UN

DER

SIZ

E C

OLL

ET M

AN

DR

EL

FAC

TOR

Y C

RIM

P D

IE

| P

9, 1

1

CA

SE

LEN

GT

H G

AU

GE

| P

29

UN

IVER

SA

L S

HEL

LHO

LDER

|

P 11

PRIM

ING

TOO

L SH

ELLH

OLD

ER

| P3

1

QU

ICK

TR

IM D

IE B

OD

Y

| P

28

27.98 42.98 42.98 47.98 43.98 69.00 27.98 5.00 15.98 — 20.00

7.50 — 12.00 5.98 2.98 15.00 —

20.00

17 Hornet 90096 90605 N/A 91499 90020 90611

17 Remington 90770 90804 91000 91571 N/A 90521 90204 90435

204 Ruger 90417 90734 91001 90567 N/A 90521 90204 90439

22 Hornet 90500 90705 91002 90829 90111 91499 90020 90354

218 Bee 90753 90830 90225 90523 90206 91350

221 Fireball 90549 90829 90112 90521 90204 91364

222 Remington 90870 90501 90706 91003 90816 90113 90521 90204 90340

223 Remington 90871 90502 90707 90694 90954 90602 90817 90114 90521 90204 90179

223 Ack. Imp. 90981~ 90707 90954 90602 90817 90114 90521 90204 90179

25-45 Sharps 90475*~ 91107 90521 90204

22/250 90872 90503 90708 90739 90955 90602 90818 90116 90519 90202 90284

22/250 Ack. Imp. 90980~ 90708 90955 90602 90818 90116 90519 90202 90284

220 Swift 90542 90702 91004 90831 90118 90527 90210 91370

223 WSSM 90446 90673 90522 90205 91358

243 Winchester 90873 90504 90709 90556 90956 90007 90819 90119 90519 90202 90320

6mm Creedmoor 90482 90759 91005 90007 91488 91340 90519 90202 90658

6mm Rem /244 Rem 90540 90710 91006 90007 90832 90120 90519 90202 90434

243 WSSM 90990 90187 90389 90522 90205 91341

25/20 WCF 90750 90833 90121 90523 90206 91385

25/35 90778 91235 91306 90520 90203

250 Savage/250-3000 90550 90834 90122 90519 90202 91374

257 Roberts 90551 90703 91007 90835 90123 90519 90202 91357

257 Ack. Imp. 90988~ 90703 91007 90835 90123 90519 90202 91357

260 Remington 90298 90974 91008 90069 90977 90993 90519 90202 90399

25/06 Rem 90536 90711 90957 90836 90124 90519 90202 90334

25 WSSM 90413 90221 90522 90205

264 Win Mag 90774 91247 91308 90522 90205

26 Nosler 90081 91163 91307 90522 90205 90637

6.5 Carcano 90749 91229 90043 90519 90202 91353

6.5 Japanese 90730 91331 90527 90210

6.5 x 55 SwedishMauser 90874 90627 90712 91009 90069 90837 90126 90520 90203 90337

6.5 Creedmoor 91556 90939 91012 90069 90704 90814 90519 90202 90812

6.5 PRC 90662 91492 91533 90522 90205 91348

6.5/300 Win Short Mag 90985 90522 90205

6mm ARC 91562*~ 91563* 91664 90529 90212 91665

6.5 Grendel 90557 91606 90596 91278 90529 90212 90763

270 Win Short Mag 90572 90962 90117 90522 90205 90393

270 Winchester 90875 90505 90713 90593 90958 90496 90820 90128 90519 90202 90229

224 Valkyrie 90066 91487 91339 90599 90031 90868

6.8 Rem SPC 90427 90735 90189 90599 90031 90397

7/30 Waters 90748 90838 91335 90520 90203

7 x 57 Mauser 90541 90714 91010 90631 90839 90130 90519 90202 90489

7 x 64 Brenneke 90771 90821 90236 90527 90210 91386

7mm/08 90537 90723 91011 90631 90840 90167 90519 90202 90343

7mm Express/280 Rem 90552 90724 91013 90631 90841 90166 90519 90202 90412

280 Ack. Imp. 90989~ 90724 91013 90131 90841 90166 90519 90202 91375

7mm Win Short Mag 90573 91271 90314 90522 90205

7mm Rem Mag 90876 90538 90720 90679 91014 90631 90821 90131 90522 90205 90297

7mm STW 90678 90869 91332 90522 90205

7mm Ultra Mag 90979 90869 91333 90522 90205

284 Winchester 90777 91249 90129 90519 90202 91362

7.35 Carcano 90766 91269 91293 90519 90202

7.5 x 55 Swiss 90767 90186 91015 90480 90184 90132 90520 90203 90419

7.5x54 French MAS 90246 90842 90051 90520 90203 91359

7.62 x 39 Russian 90877 90565 90701 91016 90827 90133 90529 90212 90345

7.62 x 54 Russian 90731 91607 90842 90147 90003 90200 90342

300 AAC Blackout 90575 90772 91017 90590 90443 90521 90204 90689

www.leeprecision.com14* THESE DIES DO NOT INCLUDE LOAD DATA ~ 3 DIE SET WITH FACTORY CRIMP DIE

LEE RIFLE DIES

FREE SHELLHOLDER INCLUDED

WHERE SHOWN

The price of Lee Dies include a FREE shell holder of the proper

size. Some manufacturers charge $14.50 extra for

this necessary part.

LEE PRECISION, INC.

RG

B D

IES

|

P 12

PAC

ESET

TER

3-D

IE S

ET

| P

12

PAC

ESET

TER

2-D

IE S

ET

| P

12

PAC

ESET

TER

VER

Y L

TD

. | P

12

PR

OD

UC

TIO

N

CO

LLET

DIE

SET

|

P 13

ULT

IMAT

E R

IFLE

DIE

SET

| P

13

CO

LLET

NEC

K S

IZIN

G D

IE

| P

13

.002

UN

DER

SIZ

E C

OLL

ET M

AN

DR

EL

FAC

TOR

Y C

RIM

P D

IE

| P

9, 1

1

CA

SE

LEN

GT

H G

AU

GE

| P

29

UN

IVER

SA

L S

HEL

LHO

LDER

|

P 11

PRIM

ING

TOO

L SH

ELLH

OLD

ER

| P

31

QU

ICK

TR

IM D

IE B

OD

Y

| P

28

1 ¼—

12 T

HR

EAD

SER

IES

FAC

TO

RY

CR

IMP

DIE

S

| P

20

1 ¼—

12 T

HR

EAD

SER

IES

CO

LLE

T D

IES

|

P 20

1 ¼—

12 T

HR

EAD

SER

IES

|

P 20

27.98 42.98 42.98 47.98 43.98 69.00 27.98 5.00 15.98— 20.00

7.50— 12.00 5.98 2.98 15.00—

20.00 50.00 125.00 125.00

300 Ham’R 91564~ 91608 91636 91276 90521 90204 91609

30/40 Krag 90555 90843 90137 90522 90205 91354

30/30 Win 90878 90506 90716 90693 91018 90480 90822 90136 90520 90203 90249

30/30 Ack. Imp. 90982~ 90716 91018 90822 90136 90520 90203 90249

303 Savage 90756 90823 90528 90211 91383

308 Winchester 90879 90507 90718 90695 90959 90480 90823 90139 90519 90202 90231

300 Win Short Mag 90942 90185 91019 90480 90331 90034 90522 90205 90484

300 Savage 90545 90844 90138 90519 90202 91356

30/06 90880 90508 90715 90736 90960 90480 90824 90140 90519 90202 90291

338/06 90987 90849 90519 90202

300 Win Mag 90881 90539 90722 90738 90961 90480 90825 90142 90522 90205 90441

300 H & H 90560 90726 91020 90970 90141 90522 90205 90407

6.5–300 Weatherby Mag 90983 91493 90522 90205

300 Weatherby Mag 90558 90727 91020 90845 90143 90522 90205 90408

300 Ultra Mag 90698 90970 90141 90522 90205 91366

7.65 Arg Mauser 90732 90846 90134 90520 90203 91382

7.7 Jap 90733 90847 90115 90519 90202 91368

25-303 90793 91491 90522 90205

303 British 90882 90547 90717 91021 90826 90144 90522 90205 90325

32-40 90758 91239 90520 90203 91376

32 Winchester Special 90757 91227 90491 90520 90203

325 WSM 90923 91255 90222 90522 90205 91344

8x56 R Hungarian 90925 91273 90589 90003 90200

8x57 Mauser 90883 90544 90719 91022 90848 90148 90519 90202 90347

8mm Lebel 90768 91272 91497 N/A

41 Swiss 90411* 90525 90208

338 Winchester 90546 90721 91023 90849 90149 90522 90205 90391

338 Ultra Mag 90927 91257 91314 90522 90205

348 Winchester 90760 90857 91304 90525 90208 91360

350 Rem Mag 90776 91233 91315 90522 90205 91377

358 Winchester 90797 90904 91318 90519 90202

35 Remington 90543 90728 91024 90828 90150 90519 90202 90403

35 Whelen 90752 91241 90972 90519 90202 91355

9.3 x 62 Mauser 90654 90610 91299 90519 90202 90614

375 Ruger 90090 90609 91285 90522 90205 90613

300 PRC 90224 91494 90522 90205

375 H & H 90559 90729 91025 90850 90164 90522 90205 90395

416 Remington 90805 90906 90522 90205

43 Mauser 90806 91498 N/A

43 Spanish 90765 91497 N/A 91367

32-20 90751‡ 90421 90146 90523 90206 91365

38-40 90761‡ 90852 91322 90001 90272 91351

38-55 90762‡ 90853 90994 90520 90203 91379

375 Winchester 90563‡ 90905 90165 90520 90203 91371

44/40 90564‡ 90854 90168 90001 90272 91369

444 Marlin 90562‡ 90855 90151 90528 90211 91372

45/70 Government 90561‡ 90856 90152 90525 90208 90458

450 Bushmaster 90182 91167 91325 90519 90202 N/A

50 Beowulf 90296* 91292 90529 90212

350 Legend 90078 90445 91567 90521 90204 91561

458 Socom 90409 90815 91290 90519 90202 N/A

40/60 90214* 90525 90205

458 Win Mag 90800‡ 90969 90971 90522 90205 91345

L A R G E S E R I ES T H R E A D E D D I ES | U s e w i t h C l a s s i c C a s t P r e s s p . 2 0

338 Lapua 90353 90462 91503 91496 90745 90635

416 Barrett* SHELLHOLDER NOT INCLUDED 90903▴ 90252

577/450 Martini-Henry* 91500 90902

577 Snider* 91500 90929

50 BMG SHELLHOLDER NOT INCLUDED 90903▴ 90953 90747 90515

DIESETS

WITHPOWDER

THROUGHEXPANDING

DIE

‡THESE DIES DO NOT INCLUDE FACTORY CRIMP DIE

45/70 DIES DO NOT WORK ON HORNADY LEVEREVOLUTION CASES

]57.98

1½–12 to 1¼–12DIE ADAPTER BUSHING

Use these dies in competitor's press

91697 12.00

15

ReLOADinG21

FREE SHELLHOLDER

INCLUDED WHERE SHOWN

* THESE DIES DO NOT INCLUDE LOAD DATA ▴20.00

LEE RIFLE DIES


LEE PRECISION, INC.

RELOADING PRESS OVERVIEW

SINGLE STATION PRESS

OPTIONS

Compatible cartridges Rounds per hour

All cartridges up to 50 BMG

Accepts both 7/8 – 14 Threaded Dies and

Large Series Threaded Dies 1 1/4-12

50

Classic Cast Press # 90998MSRP $ 190.00 see more information on page 20

Single Station Presses will load nearly any cartridge. Cartridges are loaded in a batch process—for example, 20 cases are de-primed and sized, charged, then bullets seated. This die changing process is sped up by the Lee Breech Lock Quick-Change System. Rifle case reloading is best accomplished on a single station press. For a beginner, a single station press in a kit is the best value.

Recommended for new reloaders or those who prefer to batch load

single stage press kit options

RELOADING PRESSES LAST A LIFETIME, so buying on what your budget allows makes the most sense. You’ll never regret buying a value priced press — you’ll always have a need for a simple press for miscellaneous jobs.

All Lee Presses feature compound toggle linkages. This permits full length sizing the largest magnum cases with ease. Many feature built-in spent primer catchers, tough powder paint coating and detailed instructions. Under normal use, all our presses will last a lifetime. For those that simply want the best, you can’t beat the “Classic Cast.”

if you are just getting started, you can save even more money by purchasing a kit

Breech Lock Hand Press Kit # 90180 page 18 MSRP $88.00

Breech Lock Challenger Kit # 90030 page 19 MSRP $210.00


All cartridges up to 460 Weatherby Mag 50

Breech Lock Challenger Press # 90588 page 19MSRP $ 105.00

Breech Lock Reloader Press # 90045 page 18MSRP $ 59.98


All cartridges up to 50 BMG

Accepts both 7/8 – 14 Threaded Dies and

Large Series Threaded Dies 1 1/4-12

50

Classic Cast Press # 90998MSRP $ 220.00 see more information on page 20 50th Anniversary Kit # 90050 page 19 MSRP $219.00

17

ReLOADinG21 PRESS SELECTION OVERVIEW

TURRET PRESS PRO 4000 PRO 1000 LOAD-MASTER


All cartridges up to 460 Weatherby Mag

250

Classic Turret Press # 90064 pg 21MSRP $ 200.00

Value Turret Press # 90932 pg. 22MSRP $ 140.00


32 S&W Long to 30/06

500+

Pro 4000 Kit Full description pg 25 MSRP $ 330.00

Auto Breech Lock Pro Press only # 90900 pg 25 MSRP $ 170.00

360

TURRET PRESSES offer single station simplicity with near progressive speed. No need to unscrew dies; the turret advances to the next station automatically. Four pulls of the lever and you have a completed round. Perfect for moderate production of handgun ammunition. Deactivate the Auto-Index feature and you can batch reload the longest rifle cartridges. Twist and exchange the turret, snap in a new shell holder, and you’re ready to load your next cartridge.

PRO 4000 Designed with the perfect balance of speed and simplicity. This press is so easy to set up and operate: if you have reloaded before, you likely won’t even need to look at the instructions. Cartridge changeover can be completed in seconds. Breech Lock quick change feature in all four positions. You’re also going to enjoy using this press for simple case processing like depriming and sizing a batch of cases for tumble cleaning or case trimming. With the auto index deactivated, you can use it as the handiest single station press ever made.

PROGRESSIVE PRESS

OPTIONS

DESIGNED FOR VERY HIGH PRODUCTION of handgun

cartridges. Add a bullet and pull the lever; other operations are

automatic. Select these presses only if you are shooting more than

500 rounds per week.

If loading limited quantities of many different cartridges, a Turret

Press or Pro 4000 is your best choice. Changeover from cartridge to

cartridge can become involved on the progressive presses.

RECOMMENDED FOR ADVANCED

HIGH VOLUMEUSERS


32 S&W LONG to 223 Remington 500+

Pro 1000 FULL DESCRIPTION PAGE 24MSRP $ 340.00


32 S&W LONG to 30/06 500+

Load-Master FULL DESCRIPTION PAGE 25MSRP $ 420.00

COMPACT PRESSES


LEE PRECISION, INC.

Lee Ram PrimePrimes on the press up-stroke for a more sensitive

feel. Includes small and large priming assemblies;

no tiny parts to fumble or lose. Fits all brands of

presses. Use on old school presses, where you

need to thread in dies.

90106 19.98

RELOADING PRESS OVERVIEW

New, improvedBreech Lock Ram Prime

Start priming in seconds, nothing to adjust.

Includes small and large priming assemblies,

no tiny parts to fumble with or lose.

Effortless priming in the

tightest pockets.

Uses any brand press shell holder.

Safe with all brands of primers.

Works in any Lee Breech Lock press or adapter.

91612 19.98

Spline Drive BushingsBreech lock quick change bushing with integral lock collar provides unmatched precision and convenience when adjusting dies. Split clamp positively locks die into position.

90063 2-Pk

16.00


90042 3-Pk 21.00

90095 4-Pk25.00

Lee Breech Lock Reloader PressINCLUDES THE BREECH LOCK SYSTEM

An outstanding value. Exclusive balanced lever that can’t drop down

to pinch your fingers. Unlimited hand clearance that only a ‘‘C’’ frame

can offer. Works equally well with the right or left hand. Even if you

already own a press, an extra press is always useful for decapping,

bullet seating or bullet sizing.

90045 59.98

Lee Breech Lock Hand Press

Features the Lee Breech Lock System. A full size hand held reloading

press, yet the tool weighs only 1¾ pounds and costs so little you

will want more than one. No matter how much equipment you

have, it’s great to have a portable hand press. No time is wasted

mounting a tool to a work bench.

When you’re finished—just pack

it away.

90685 65.00

Breech Lock Hand Press Kit THE PERFECT PORTABLE RELOADING PRESS KIT

Begin reloading at once. No wasted time mounting to a work bench. Pack

it all in the box when finished. Great for apartment dwellers or loading at

the range. Dies sold separately.

K I T I N C L U D E S BREECH LOCK HAND PRESS

RAM PRIME

POWDER FUNNEL

CASE SIZING LUBE

90180 88.00

Shown on optional Bench Plate. Order #90251

BIG GUN INSPIREDBREECH LOCK QUICK CHANGE NOW STANDARD ON ALLLEE SINGLE STATION PRESSESSwitch dies with a ⅙ of a turn rather than fourteen or more turns. Loading with a breech lock equipped press is as convenient as a Turret Press when loading small quantities of ammunition. Interrupted three-start thread assures dies will return and lock into the exact same position. If cost is more important than convenience, you can leave the Breech Lock bushing locked in the press and screw dies in and out like a conventional press.

BREECH LOCK RAM PRIME

Change dies instantly

with a twist of the wrist

Breech Lock Bushings Breech lock bushings fit all Lee Breech Lock presses. Allows instant, accurate die changes.

90600 2-Pk. 11.98

Color coded for quick, positive die selection

BREECH LOCK CHALLENGER

19

ReLOADinG21

LARGE & SMALL SAFETY PRIME

90997 30.00 SEE DESCRIPTION PAGE 22

Primer Arms

CHALLENGER PRESS +and+ KITS

A COMPLETE POWDER HANDLING SYSTEM with the

most convenient and repeatable Perfect Powder Measure,

plus the Lee Safety Scale, the most sensitive, safest of all pow-

der scales. Fill your cases with the Powder Funnel. $209.94 value

Case Preparation tools include the Lee Value Trim case trimmer to trim

on your reloading press (order cartridge specific trim die separately on

pg. 28), and a Cutter & Lock Stud to trim your cases. (Order cartridge

specific case length gauge separately on pg. 28–29). The Lee Chamfer

Tool chamfers the inside and outside of the case mouth, and a tube of

premium Sizing Lube is also included. A small and large Primer Pocket

Cleaning Tool completes the case preparation package. $32.90 value.

But that’s not all! You get the large and small Safety Prime. Prime with push

button convenience and is safe with all brands of primers. Never touch the

primer from box to the case. $30.00 value.

Purchased separately $242.84 value 90050 219.00


Features the same components as the 50th Anniversary

Kit, but we have replaced the Safety Prime with the New Auto-Prime

and a set of Auto-Prime shell holders. This kit is for those who prefer

to prime off the press. If purchased separately—a $259.80 value.

90030 210.00

Breech Lock Challenger Press

The “O” frame press by design is the strongest and

most popular style press by far. Large opening and

long stroke handles the largest belted magnums with

ease. The primer catcher is positive and routes the

spent primers directly to the trash can. Priming is

a dream with the Lee Lever Prime System. Best

of all, it includes the Breech Lock Quick Change

Die System. Change dies instantly with a twist of

the wrist; you’ll never have to re-adjust your die.

Other features include all steel

linkage with adjustable length lever.

This same press would cost you more

than twice as much from other manu-

facturers, and that’s without all of the

Challenger’s features.

90588 105.00

Shown on optional Bench Plate.

Order #90251

50th ANN IVERSARY K I T

BREECH LOCK CHAL L ENGER K I T

“O” frame . . .“O” frame . . . most most popularpopular style press style press by farby far


CLASSIC CAST PRESSLEE PRECISION, INC.

RIGIDCAST IRON

FRAME,CAST+and+

MACHINED+with+ PRIDEIN+the+USA

NEEDBUSHINGS?

page 9

LARGE SERIES RELOADING DIES

50 BMG Die Set 1¼–12 Thread

90515 125.00

50 BMG Ram Prime Tool 90901 25.00

50 BMG

Factory Crimp Die

90953 50.00

50 BMG Shell holder

90903 20.00

BAKED POWDER FINISH AND ALL STEEL LINKAGE

MAKE THE LEE CLASSIC CAST PRESS THE

MOST ATTRACTIVE AND DURABLE PRESS MADE

dCHANGES

EASILY FOR LEFT-HANDED USE.

dSPENT PRIMERS COLLECTED AND

DROPPED INTO FLEXIBLE PLASTIC

TUBE FOR EASY EMPTYING.

dLARGE

& SMALL SAFETY PRIME

90997 30.00

. The industry’s largest opening, and longest stroke—handle adjusts to provide least travel of any press.

. Largest ram, 1 ⅛” diameter, supported by over 12 square inches of ram bearing surface.

. Spent primer disposal direct to trash can with attached tube.

. Powerful compound linkage with positive travel stop prevents press toggle or “cam over.”

. Rigid cast iron construction in a classic “O” design for maximum strength. Baked powder coating is durable and makes a handsome addition to any reloading bench.

. Large, flat cored base with 3 mounting holes, mounts solid to any bench.

. Automatic primer arms with bottom of stroke priming for best feel. Includes both large and small priming arms. No more fumbling with tiny guides and springs when changing primer size.

. Designed to work with both standard ⅞–14 and large series 1¼–12 dies. Included Breech Lock adapter to accept standard ⅞–14 dies. Change dies instantly with a quick twist of the wrist.

. Two-piece ram allows installation of the mammoth 50 BMG shell holder or the shell holder insert for standard press shell holders. Shell holder insert can be rotated to allow primer installation on the right or left side.

50 BMG Loading BlockBlock dimensions 9’’ x 8’’High impact, chemical resistant plastic

Holds 72 cases, can also be used to store 7/8 – 14 die sets

Continuous flange surrounds tray for easy lifting.

90632 15.00

LEE CLASSIC CAST PRESS

90998 220.00

1¼–12 Thread Series 125.0090902 577/450 Martini-Henry *90929 577 Snider *90252 416 Barrett * Shellholder not included

90515 50 BMG Shellholder not included

*These dies do not include load data

1¼–12 Thread Series Factory Crimp Dies 50.0090953 50 BMG90745 338 Lapua

1¼–12 Thread Series Collet Dies 125.0090747 50 BMG 90635 338 Lapua

CLASSIC CAST 50 BMG PRESS KIT

NEWPRESS NOW INCLUDESBREECH LOCK ADAPTER

Gives you the ability to quick change diesor remove the adapter to loadthe mammoth 50 BMG

Shown on optional Reloading Stand. Order #90688

HAVE AN OLD SCHOOL PRESS AND THREAD DIES INTO REMOVABLE, THREADED ADAPTER? MODERNIZE YOUR PRESS WITH THE BREECH LOCK SYSTEM

90512 1 1/4-12 10.00

90094 1 1/2-12 12.00

1½ -12 to 1¼ - 12 Die Adapter Bushing

Use the Lee 50 BMG and other 1¼ series dies in competitor's 50 BMG large presses. 91697 12.00

At lAst, An AffordAble wAy to reloAd the monster 50bmG

KIT INCLUDES EVERYTHING YOU NEED TO START RELOADING THE 50

LEE CLASSIC CAST PRESS • SET OF 50 BMG DIES

SHELL HOLDER • RAM PRIME TOOL • AND TUBE

OF CASE SIZING LUBE

BREECH LOCK ADAPTER KIT also includes shell

holder insert, large & small primer arms and breech lock

adapter bushing to accept standard 7/8-14 dies so you

can load all your smaller cartridges. All this for less than

what others charge for dies alone.

50 CALIBER BMG PRESS KIT

90859 370.00

SPENT PRIMERS COLLECTED AND DROPPED INTO

FLEXIBLE PLASTIC TUBE FOR EASY EMPTYING.

21

ReLOADinG21


THIS KIT AND A SET OF LEE DIES iS EVERYTHING YOU NEED TO BEGIN

RELOADING PISTOL AMMO. The Classic Turret Press is fast and convenient when

loading handgun cartridges, with rates in excess of 250 rounds per hour possible.

The kit includes the Auto-Drum powder measure and powder measure riser,

perfect for all handgun and rifle cartridges. Large and Small Safety Prime are

included making on press priming a delight! Instant Change Turret makes changing

calibers a snap. Deactivate the auto-index, and batch load the longest and largest

rifle cartridges.

Complementing your press kit are the case condi-

tioning tools to prepare your brass for loading. Includes

Cutter, Lock Stud, Chamfer Tool, small and large

Primer Pocket Cleaner, and a tube of Lee case sizing

lube. Complete it with the cartridge specific Case

Length Gauge. Verify your loads with the included

Lee Safety powder scale.

Completing the kit is Modern Reloading Second

Edition, 2019 revision with all new

load data covering over 170 cartridg-

es with more than 38,000 loads.

90304 350.00

GET AN ADDITIONAL TURRET FOR YOUR LEE PRESSESEXTRA TURRET, 4 HOLE

90269 15.00

Lee Classic Turret Press

The sturdy iron base shows its Classic Cast roots. The long stroke

allows rifle cases over three inches long to be loaded using the auto-

matic index. Deactivate the Auto-Index and cases over 4 inches can

be loaded. The rigid cast iron frame supports the ram with over 12

square inches of area. The industry’s largest ram is drilled completely

through to dispose primers in an attached clear PVC tube. Every

primer is caught — guaranteed.

Instant change turrets are the same as the famous Lee Turret

Press. The Classic Turret uses the Lee Lever Prime System · LPS

and the optional Lee Safety Prime tool makes priming on the

press a delight. If you like to own the best, then treat yourself

to the Lee Classic Turret. The finest reloading system made.

LEE CLASSIC TURRET PRESS 90064 200.00

POWDER MEASURE RISER FOR SAFETY PRIME

90041See page 33

A MACHINE THAT

DOES IT ALLThis press has all the

features of the award-winning Turret Press with

the quality touches that make this the finest, most

convenient press to own. The Classic Turret features

the solid steel linkage of the Lee Classic Cast. Your first stroke of the

hardwood gripped lever will convince you

this is one solid, silky smooth press!

Shown on optional Reloading Stand. Order #90688

NOTE Rifle reloaders require SHORT or

LONG CHARGING DIE | see page 33

CLASSIC TURRET PRESS +and+ KIT

C L A S S I C T U R R E T P R E S S K I T

Lee Safety Prime

Makes priming on the press a delight. Never touch the primers from box to shell. Primer flip tray features a CAD designed flipping surface that instantly rights the primers. Change primer size in seconds. Primers are dispensed with a satisfying click of the primer feed trigger.

90997 30.00

www.leeprecision.com22 22

LEE PRECISION, INC.

VALUE TURRET PRESS, KIT +and+ SAFETY PRIME

Shown on

optional Reloading Stand.

Order #90688


NOTE Rifle reloaders require SHORT or LONG CHARGING DIE | see pg 33

VALUE TURRET PRESSequipped with the LEE LEVER PRIME SYSTEM™

Proven design with compound leverage. No spring in this turret design. The

turret is locked into a solid steel ring with big rifle bolt type lugs. Exclusive

design puts the lugs on the circumference so there can be no tipping. The

linkage is so powerful that the largest magnum cases are sized with ease.

Effort required is so small that the usual heavy bench is not essential. The Lee

Turret Press has built-in primer disposal tube and a comfortable roller handle.

Even if you do not need all of these features, why pay more for anything less?

Power and strength to spare, plus unequalled convenience. The Lee Turret

Press is suitable for loading all rifle and pistol cases, but really shines when loading

large quantities of hand gun ammunition. This is the most convenient press made.

Only a true progressive press is faster. Includes the LEE LEVER

PRIME SYSTEM with large and small primer arms. Works with the

Lee Safety Prime.

4 HOLE TURRET PRESS w/Auto Index 90932 140 .00

Lee Safety Prime

Makes priming on the press a delight. Never touch

the primers from box to shell. Primer flip tray

features a CAD designed flipping surface that

instantly rights the primers. Change primer size in

seconds. Primers are dispensed with a satisfying

click of the primer feed trigger.90997 30.00

Lee Value Turret Press Kit

The Value Turret Press, along with the Auto -Drum Powder

Measure, produces top quality pistol ammo in a hurry.

A finished round with a few pulls of the lever. Disconnect

the Auto-Index and it’s large enough to handle monster belted

magnum rifle cases. When it’s time to change calibers, simply

lock in a new turret and begin reloading in seconds. In addition

to the Turret Press and Auto Drum Powder Measure, the kit

includes the Lee Safety Scale, unmatched for sensitivity, a

primer pocket cleaner, cutter and lock stud to trim the cases

and a chamfer tool to deburr cases after trimming. Complete

the case conditioning tools with the cartridge specific Case

Length Gauge (see page 28).

A set of Lee Dies is all that is required to complete this

reloading outfit. And all of this at a price that will allow you

to pay for your investment in a matter of hours.VALUE TURRET PRESS KIT 90928 240.00

GET AN ADDITIONAL TURRET FOR YOUR

LEE PRESSESEXTRA TURRET, 4 HOLE

90269 15.00

Built-in primer disposal tube

Low profile steel base with positive through ram primer disposal

POWDER MEASURE RISER FOR SAFETY PRIME

90041See page 33

VA L U E TURRET PRESS

KIT

If you order Shell Plates to convert to another caliber with a different primer size, be sure to order the PRO 1000 PRIMER ATTACHMENT

Pro 1000 Primer Attachment

90660 16.00Small and large priming assemblies included.

23

ReLOADinG21

PRODUCTNO. PLATE C A R T R I D G E S

90651 1 38 SPECIAL, 357 MAG, ETC.

90652 2 45 ACP, 45 GAP, ETC.

90664 3 45 WINCHESTER MAGNUM

90653 4 222, 223, 380 AUTO, 32 S&W LONG, 32 H&R MAGNUM

90976 6 32/20, 25/20

90655 7 30 M1 CARBINE, 32 AUTO

90656 9 41 MAGNUM

90657 11 44 SPECIAL, 44 MAGNUM, 45 COLT

90666 12 7.62X39, PPC, 22O RUSSIAN

90665 13 45 AUTO RIM

90065 14 38/40, 44/40, 45 COLT, 460 S&W

90669 19 40 S&W, 10mm AUTO, 9MM LUGER, 38 SUPER, 38 AUTO, 41 AE


90907 1S 38 SPECIAL, 357 MAG, ETC.

90908 2L 45 ACP, 30/06, 308, 6.5 CREEDMOOR

90909 3L 30/30, 7x30 WATERS, 7.5 SWISS

90910 4S 222, 223, 380 ACP

90059 4A 32 S&W LONG, 32 H&R MAG., ETC

90911 5L BELTED MAGNUMS 300 MAG 303 BRITISH , 30/40 KRAG, 7MM WSM

90912 6S 32/20, 25/20, ETC.

90913 7S 30 M1 CARBINE, 32 ACP

90914 8L 45/70, 348 WIN, 416 RIGBY

90915 9L 41 MAGNUM

90916 10L 220 SWIFT, 6.5 JAP, 458 SOCOM

90917 11L 44 MAG., 44 SPL., 45 COLT

90918 12L 7.62X39, 6MM PPC, 22 PPC, ETC.

90919 14L 44/40, 38/40, 45 COLT, 460 S&W

90612 16L 500 S&W, 7.62X54R

90920 19S 9MM LUGER, 40 S&W, 38 SUPER, ETC.

90068 19L 10MM AUTO

90884 20 22 HORNET

90984 21L 6.8 REM SPC, 224 VALKYRIE


90582 1 38 SPECIAL, 357 MAG, ETC.

90584 2 45 ACP, 45 GAP, ETC.

90629 3 45 WINCHESTER MAGNUM

90630 4 222, 223, 380 AUTO, 32 S&W LONG, 32 H&R MAG

90647 7 30 M1 CARBINE, 32 AUTO

90278 9 41 MAGNUM

90648 11 44 SPECIAL, 44 MAGNUM, 45 COLT

90414 12 7.62 x 39 RUSSIAN, 6.5 GRENDEL

90649 13 45 AUTO RIM

90802 14 38/40, 44/40, 45 COLT, 460 S&W

90659 16 500 S&W, 7.62X54R

90944 19 40 S&W, 10MM AUTO, 9MM LUGER, 38 SUPER, 38 AUTO, 41 AE

90941 21 6.8 SPC, 224 VALKYRIE

Multi-Tube Adapter for Bullet Feed Kit

Four tube magazine keeps Lee Bullet Feeder fed

with a continuous supply of bullets. Each tube holds

approximately 25 bullets. Quickly and easily installed.

Includes large and small adapters, four large and

small feed tubes and cylinder, plate assembly.

90280 27.00

CASE COLLATORFill all four tubes in just 10 seconds. Works with handgun, .380 to 45 Colt.

90667 14.98

Check shell holder chart on page 31 for further listings.

PROGRESSIVE PRESS SHELL PLATES

ACCESSORIES for the PRO 1000 · PRO 4000 · LOAD-MASTER

LARGE PRIMER FEEDER90077 24.98

SMALL PRIMER FEEDER90075 24.98

for the Pro 1000

for the LOAD-MASTER

Shell Plate Carrier 55.98 To change calibers, the entire Shell Plate Carrier can be replaced. Unit comes complete with Shell Plate, Primer Feed, Case Ejector, Auto-Index and spare parts.

#1 Carrier 90644 38 SPL, 357 MAG, etc#2 Carrier 90645 45 ACP, etc.

#4 Carrier 90646 222, 223, 380 AUTO, 32 S&W LONG, 32 H&R MAG

#11 Carrier 90650 44 SPECIAL, 44 MAGNUM, 45 COLT

#19 Carrier 90683 40 S&W, 9mm LUGER, 38 SUPER, 38 AUTO, 41 AE

PRO1000POSITIVE INDEXSHELL PLATES20.00

LOAD-MASTERSHELL PLATES29.98

PRO 4000SHELL PLATES25.00

FOLDING PRIMER TRAY 2-PK 90606 8.00

UNIVERSALCASE FEED MAGAZINE

90242 35.00Automates case feeding process. Cartridge compatibility listing on leeprecision.com

EXTRA CASE FEEDER TUBES

7 Pk. 90661 9.98

PROGRESSIVE PRESS ACCESSORIES

BULLET FEED KIT IS COMPLETE FOR ONE BULLET DIAMETER AND

RANGE OF LENGTH. TO CONVERT TO ANOTHER CALIBER OR BULLET LENGTH,

SELECT APPROPRIATE FEED DIE AND FINGER & BULLET SEAT AND FEED DIE

48.00 14.98

FEED KITS FEED DIE COMPLETE

DESCRIPTION AND FINGERS

90892 30 & 32 cal Bullets up to .60 long 90885

90893 9mm through .365 diameter up to .46 long 90886

90894 9mm through .365 diameter .46 to .60 long 90887

90895 9mm through .365 diameter .60 to .75 long 90888

90896 40 cal through .44 cal up to .65 long 90889

90897 40 cal through .44 cal .65 to .80 long 90890

90898 45 cal bullets .50 to .67 long 90891


LEE PRECISION, INC.

32 S&W LONG AND 32 H&R MAG 90639*380 AUTO 90641*38 SPECIAL AND 357 MAGNUM 90636 38 AUTO AND 38 SUPER 900359MM LUGER 90640‡ 40 S&W 9068241 MAGNUM 9064244 SPECIAL AND 44 MAGNUM 90634 45 ACP 9063845 COLT 90643223 90633* INCLUDES SHORT CHARGING DIE.

NOT AVAILABLE IN CARBIDE

*INCLUDES AUTO-DRUM POWDER MEASURE‡ 10MM AUTO CAN BE RELOADED. PURCHASE

LARGE TROUGH #TR2164B, PIN #TR2436 AND 10MM LOAD DATA #CD2076

LEE PRO 1000COMPLETE, READY TO RELOAD

340.00Safe with CCI or Remington brand primers only

45 ACP 91550 9mm LUGER 9155538 SPECIAL AND 357 MAGNUM 91557 44 SPECIAL AND 44 MAGNUM 91558 223 REMINGTON 91551

Turret

90497

18.00

ADD A BULLET

AND PULL THE LEVERALL OUR PROGRESSIVE PRESSES

WILL PRODUCE A RELOADED ROUND

WITH EVERY STROKE. BECAUSE EVERY

PULL OF THE LEVER PRODUCES

A LOADED ROUND — PRODUCTION

LEE PRO 1000 KIT

Introduced in 1984 as the world’s first affordable progressive press. Place a bullet and pull the lever; all other operations are automatic. Load singly or progressively, feeds powder and primers only if case is present. Recently improved design with better ergonomics, steel frame, positive index pin, roller handle and positive through ram primer disposal.

Automatically advances cases up to 2 5/16”

Quick Change three die turret

Set up for specific cartridge and one primer size

Safe with CCI or Remington brand primers only

Bullet seating and crimping performed in one operation

PRO4000 K

Cartridge changeover in seconds, including primer size with no adjustments.

SHELL PLATES FOR PRO 4000shown on page 23

PRO 1000 +and+ PRO 4000 KIT

Ergonomic wood grip and all-steel linkage

Shell Plate Carrier 60.98To change calibers, the entire Shell Plate Carrier can be replaced. Each unit comes complete with Shell Plate, Primer Feed, Case Ejector, Auto-Index and spare parts.

#1 Carrier 90644 38 SPL, 357 MAG, etc.

#2 Carrier 90645 45 ACP, etc.

#4 Carrier 90646 222, 223, 380 AUTO, 32 S&W LONG, 32 H&R MAG

#11 Carrier 90650 44 SPECIAL, 44 MAGNUM, 45 COLT

#19 Carrier 90683 40 S&W, 9mm LUGER, 38 SUPER, 38 AUTO, 41 AE

BIN & BRACKET Catch your loaded rounds. See page 2 90687 14.00

Built-in primer disposal tube

25

ReLOADinG21

Precision 5-Hole Turretwith 20 locking lugs takes just seconds to change.

90079 16.00

BIN INCLUDED ORDER ADDITIONAL #90687

Explosion Shield INCLUDED 90363 6.00Necessary if using primers other than CCI or Remington brand

CALIBERS EQUIPPED WITH RELOADING DIES, PRO AUTO-DISK POWDER MEASURE & CASE FEEDER 420.00

SHELL PLATES FOR LOAD-MASTERshown on page 23

Large Primer Feeder 90077 24.98

Small Primer Feeder 90075 24.98

223 REMINGTON 90922

32 S&W LONG • 32 H&R MAG 90935

9MM LUGER 90936

380 AUTO 90937

38 SPECIAL AND 357 MAGNUM 90938

40 S&W ‡ 90940

44 SPECIAL AND 44 MAGNUM 90943

45 ACP 90945

45 COLT ( WILL LOAD 454 CASULL ) 90946

* INCLUDES AUTO-DRUM POWDER MEASURE‡ 10MM AUTO CAN BE RELOADED. PURCHASE

LARGE PRIMER FEEDER #90077 AND 10MM LOAD DATA #CD2076

**

*

SECOND-GENERATION

progressive press priced

less than many premium single station press-

es, the lowest priced 4 station progressive

available. It is also the easiest to use progres-

sive press ever made. Everything included to

begin reloading nothing else to buy.

All the features of the Pro 1000 with an

added fourth station to allow factory

crimping and post sizing. Second generation

design features a fixed tool head with quick-

change bushings. The Safety Prime is safe

with all brands of primers and makes on press

priming fast and dependable. The ideal press

for loading well used or mixed range brass.

So easy to change you’re going to enjoy using

this press for simple case preparation, like

depriming before tumble cleaning. Deactivate

the auto index and it is the handiest single

station press ever made.

AUTOMATICALLY ADVANCES cases up to 2 5/16.” Longer cartridges can be loaded by manually advancing.

AUTOMATIC Universal Case Feed Magazine

MODULAR CONSTRUCTION allows as much or as little automation as the operator desires with no adjustments.

CARTRIDGE CHANGEOVER in seconds, including primer size with no adjustments.Color coded spline drive quick change breech lock bushings.

INCLUDES Large and Small Safety Prime and priming arms. Allows safe dispensing of any brand and size primer.

INCLUDES STORAGE RACK FOR TOOLS, AND HEX WRENCH FOR SHELL PLATE CHANGEOVER. OTHERS CHARGE NEARLY $30 FOR THIS FEATURE.

INCLUDES ERGONOMIC WOOD GRIP ROLLER HANDLE.OTHERS CHARGE NEARLY $50.00 FOR THIS FEATURE.

INCLUDES BIN & BRACKET TO CATCH LOADED ROUNDS.

BULLET

VER PRESSES

ND

VERY

ES

PRODUCTION

RATES ARE VIRTUALLY IDENTICAL ON

OUR PROGRESSIVE PRESSES. ALL OF

OUR PRESSES FEATURE AUTOMATIC

CASE ADVANCE AND UNIVERSAL

CASE FEEDER. ALL ARE SETUP TO

LOAD ONE CARTRIDGE. YOU CAN

SELECT THE RIGHT PRESS BY THE

FEATURES YOU NEED.

LOAD·MAST ER

000 KIT

Grease fittings, along with a 1 ¾ inch diameter hard plated ram, ensure a lifetime of service for even the commercial reloader

Stroke and clearance sufficient for largest magnum rifle cases

Loads long rifle cartridges progressively

Load progressively or singly without spilled powder or components.

Five stations so you can factory crimp and post size.

Automatic indexing

Tray feed top of stroke priming system

Removable turret

Loaded round ejector and case catcher

Quick change shell plate. No tools required

LEE PRO 4000 KITINSTALL AUTO BREECH LOCK PIN;ADJUST YOUR DIES AND BEGIN RELOADING 330.00

Auto Breech Lock Pro Press 170Large & Small Safety Prime 30Auto Drum Powder Measure 54Shell Plate 25Universal Case Feeder 35Reloading Dies 43 Bin & Bracket 14Color Coded Spline Drive Bushings 25

$396

AUTO BREECH LOCK PRO PRESS ONLY #90900 170.00

PURCHASEDSEPARATELY, VALUED OVER

LEE LOAD-MASTER

A MASSIVE PRESS+with+ ADVANCED FEATURES

SHOWN ON OPTIONAL RELOADING STAND #90688

26

LEE PRECISION, INC.

Dirty, gritty, lead contaminated spent primers are 100% captured

in a screw top bottle

APP Press INCLUDES PRESS, AUTOMATION KIT, BOTTLE ADAPTE AND X-PRESS SHELLHOLDERS 2·4·19

90933 120.00

COMES COMPLETE WITH ALL FEED TUBES, TUBE SUPPORTS, RISERS AND CASE SLIDER

APP shown on optional Reloading Stand #90688 with Bin & Bracket accessory #90687


X-PRESS SHELLHOLDERThe APP gets its speedy operation in part, by the use of a new shell holder. We call it the X-Press Shell Holder. it allows the case to pass through the shell holder after the operations are performed.

The fastest and easiest way to deprime, size, swage, bulge bust, flare or size cast bullets, period!

Built in case and bullet feeder makes this the fastest single station press ever made.

Frameless design with an all steel linkage allows primer pocket swaging with ease.

Counter balanced handle prevents the handle from falling and pinching a finger.

Almost unlimited visibility and hand clearance.

Compact foot print mounts easily on any bench or table, with no under-swing.

Dirty, gritty, lead contaminated spent primers are 100% captured in a screw top bottle.

Accepts standard 7/8—14 dies and shell holders of any manufacture.

A little over three inches of stroke allows sizing of the larger, belted magnum cartridges.

Priced less than nearly all single station presses makes it a perfect starter press or a perfect companion press to an expensive progressive.

Includes the three most popular X-Press Shell holders 2, 4 and 19

FAST

APPSHELL

HOLDERPRODUCT

NO. CARTRIDGES

#1 91534 38 Long & Short Colt, 38 SPL, 357 MAG#2 91535 45 ACP, 308 Win., 30-06#3 91536 30/30, 6.5x55 Mauser, 32/40#4 91537 223 Rem, 5.56 NATO, 300 Blackout#5 91538 WSM’s, 7mm Rem Mag, 303 British#6 91539 218 Bee, 25/20, 32/20#7 91540 30 M-1, 32 ACP#8 91541 33 Win, 348 Win, 40/65, 45/70#9 91542 41 Magnum

#10 91543 220 Swift, 6.5 Jap, 7x64 Brenneke#11 91544 44 SPL/MAG, 45 Colt, 303 Savage#12 91545 22 PPC, 6 PPC, 7.62x39R#13 91546 45 Auto Rim#14 91547 44/40, 45 Long Colt#15 91548 25 ACP#16 91549 7.62x54 R, 500 S&W#19 91552 40 S&W, 9mm Luger#20 91553 17 HORNET, 22 HORNET#21 91554 6.8 Rem SPC, 224 Valkyrie

X-PRESS SHELL HOLDER

F O R APPAUTOMATIC PROCESSING PRESS

4.98 ea

X-PRESS SHELLHOLDER SET

CONTAINS 1 · 2 · 3 · 4 · 5 7 · 8 · 9 · 10 · 11 · 19

91622 40.00

ROLLER HANDLEUPDATE KIT

91629 30.00

AND EASY

APP AUTOMATIC PROCESSING PRESS

LEEAPPTHE

aUTOMATIC pROCESSING pRESS

27

ReLOADinG21

PRIMER POCKET SWAGE KITDESIGNED EXCLUSIVELY FOR THE LEE APP PRESS

Gently flares the case mouth to accept cast bullets without shaving. Works great to pre-vent damaging the moly and low friction coatings found on today’s high performance jacketed bullets. Includes neck plugs for .22 cal through .45 cal. Works on everything from the 22 Hornet to the largest Ultra Mag. Costs so little and works so well you can’t afford to be without one.

90798 16.98

UNIVERSAL CASE EXPANDING DIE

REPLACEMENT DECAPPER UNGUIDED 90783 2.50 | GUIDED 4.00

For smooth operation and less decapper bending or breaking — order caliber specific guided decapper.

91574 17 CAL-204 RUGER91576 22 CAL 91577 6mm–25 CAL 91578 27 CAL -7mm 91580 30 CAL 91581 34–35 CAL 91583 40 CAL 91584 45 CAL

DECAPPING DIEAn absolute must for those who clean cases before reloading.

No cleaning or lubing needed when using this die. Tough,

almost unbreak able decapper easily removes crimped in

primers. Fits cases up to .560” in diameter; up to 3.125”

long. 90292 14.98

380 10/40 45 ACP

The kit includes the mounting body incorporating the Lee quick change Breech lock feature. The body accepts our new low cost bullet sizing die. The new sizing die is high carbon steel and specially tapered to reduce sizing effort. The sizing die is retained in the mounting body with a dual threaded bottle adapter. Bullets are sized nose first; this is the most accurate and causes the least distortion. Best of all no special top punches are required. Will seat and crimp gas checks while sizing. Great for powder coated or liquid lubricated bullets. All bullets must be lubricated, order LEE LIQUID ALOX or your favorite coating.

91532 15.00

ORDER BULLET SIZER AND PUNCH BELOW

BULLET SIZER AND PUNCH 12.00

BREECH LOCKBULLET SIZING KITFOR THE NEW LEE APP

Other sizes can be made on a custom basis.leeprecision.com/custom-breech-lock-bullet-sizer-punch.html

Breech Lock Bullet Sizing Kit

INTAKEFUNNEL

APP PROCESSING ACCESSORIES

PART NO. DIAMETER PART NO. DIAMETER PART NO. DIAMETER

91505 .224

91506 .225

91507 .243

91508 .278

91509 .284

91510 .285

91511 .308

91512 .309

91513 .311

91514 .314

91515 .323

91516 .329

91517 .339

91518 .356

91519 .357

91520 .358

91521 .401

91522 .410

91523 .427

91524 .429

91525 .430

91526 .451

91527 .452

91528 .454

91529 .457

91530 .501

91531 .510

UNIVERSAL CASEFEED MAGAZINE90242 35.00Automates case feeding process. Most handgun and short rifle, like the 223.

Breech Lock Ram PrimeStart priming in seconds, nothing to adjust.

Includes small and large priming assemblies, no tiny parts to fumble with or lose.

Effortless priming in the tightest pockets.

Uses any brand shell holder.

Safe with all brands of primers.

Works in any Lee Breech Lock press or adapter.

91612 19.98

BULGE BUSTER KITFOR THE NEW LEE APP

Lee APP Bulge Buster Kitwith appropriate Lee Factory

Crimp Die restores free function

of rimless cases that have low base

bulges. Low base bulges usually occur

from chambers that do not fully support the cartridge or cases resized

in carbide dies from manufacturers other than Lee.

APP BULGE BUSTER KIT 91572 19.98

The fastest, most convenient way to swage primer pockets. Will swage large and small primer pockets on any case up to 2 ½ inches (30/06) long.

No shell holders required!

Large and small swage punches included.

Exclusive, case guided swage push die works without adjustment. It automatically aligns your case mouth to receive the push rod and six guide fingers center the primer pocket to the swage punch. Nothing to adjust—simply install and begin swaging.

Swage adjustment is a finger adjustable knob, no tools required.

APP PRIMER POCKET SWAGE KIT

90237 50.00

OPTIONAL CASE COLLATOR #90667 pg 23

Now you can swage primer pockets

as fast as you can operate the press lever

28

LEE PRECISION, INC.

Trim brass to the correct length while chamfering the case mouth

Lee Quick Trim Case Trimmer

The Deluxe Quick Trim Case Trimmer quickly and precisely

trims your brass to the correct length at the same time

it chamfers the inside and outside of the case mouth.

No calipers, measurement or adjustment required. Sim-

ply install the appropriate quick trim die in your press

and start trimming. A click adjustable stop allows trim

length adjustment in .001 of an

inch increments. Allows the user to

shorten case to a uniform shorter

length than standard, reducing

trimming frequency. Includes snap

on chip catcher. Order appropriate

Quick Trim die for each cartridge

listed on chart on upper right and

opposite page. 90437 27.00

Deluxe Power Quick TrimTrim and chamfer in a matter of seconds. Hex shank snaps in to cordless screwdriver or drill (sold separately) Includes power Quick-Trim adapter, chip catcher and deluxe cutter assembly. To com-plete your trimming setup, order cartridge specific pistol or rifle Quick Trim die from list above.

90670 26.00Cordless screwdriver pictured is not included.

QUICK TRIM

FOR SAFETY SAKE, TRIM YOUR CASES

The simplest way to check the case

and trim to the correct safe length

is with a Lee Case Trimmer.

CASE TRIMMER QUICK TRIM +and+ CONDITIONING TOOLS

LOCK STUD CASE LENGTH GAUGE CUTTER

SHELLHOLDER

Decapper & Base Easily removes crimped in primers from military cases. Guaranteed unbreakable.

22 Caliber 90103 30 Caliber 90102 7.98

QUICKTRIM DIE15.00

Ltd. Prod.QUICK

TRIM DIE20.00

CASELENGTHGAUGE7.50

Ltd. Prod.CASE LENGTH

GAUGE12.00

17 Fireball 9134717 Hornet 9061117 Rem 90435204 Ruger 90439218 Bee 91350 90225 219 Zipper 9130522 Hornet 90354 90111*22/250 90284 90116220 Swift 91370 90118221 Fireball 91364 90112222 Rem Mag 91283222 Remington 90340 90113*223 Remington 90179 90114223 WSSM 91358 90673224 Valkyrie 90868 91339225 Winchester 91280240 Weatherby Magnum 91281243 Winchester 90320 90119243 WSSM 91341 9038925 WSSM 9022125-20 Winchester 91385 9012125-35 Winchester 9130625-06 Remington 90334 9012425-20 Winchester 90121250 Savage (250/3000) 91374 90122*257 Roberts 91357 90123257 Weatherby Magnum 91342 9129826 Nosler 90637 91307260 Remington 90399 90993264 Winchester Magnum 91308270 Weatherby Magnum 91279270 Winchester 90229 90128270 Winchester Short Mag 90393 9011728 Nosler 91284280 REM ACK IMPROVED 91375 91295284 Winchester 91362 9012930-378 Weatherby Magnum 9130930-40 Krag 91354 9013730/06 Springfield 90291 90140*30/30 Winchester 90249 90136300 AAC Blackout 90689 90443300 H&H 90407300 H&H or Ultra Magnum 90141300 HAM’R 91609300 RSAUM 91343300 Remington Ultra Magnum 91366300 Savage 91356 90138300 Weatherby Magnum 90408 90143300 Winchester Magnum 90441 90142300 Winchester Short Mag 90484 90034303 British 90325 90144303 Savage 91383308 Marlin 91352

The ultimate in case trimming, speed and convenience


Hex shank fits popular, low-cost cordless screwdrivers.

Universal 3 jaw chuck fits 25 ACP to largest belted magnums without changing shellholders.

Includes cutter and 3 jaw chuck.

Order cartridge specific case length gauge separately.

3 Jaw Chuck Trimming Kit

91720 27.00

nEW

TWO GREAT WAYS TO TRIM CASES

QUICK TRIM or CASE LENGTH GAUGE

Lee Case TrimmerAfter a case has been loaded a few times, it will stretch beyond maximum length and must be

trimmed. There is no better system to check and trim cases than with the Lee Case Length

Gauge and cutter. You don’t need an expensive caliper to set length and never waste even a

single case setting up with the cut and try system common to all other brands. The piloted

cutter assures the case mouths are absolutely square and true to the case neck. Best of

all, the fixed length design assures it will never go out of adjustment.

The Cutter and Lock Stud works for all calibers. You will need only one. The Case Length

Gauge (Pilot) and Shell Holder must be ordered as Case Length Gauge and Shell Holder

for each caliber — see chart listing at right and opposite page. You can trim cases by hand,

use an electric drill.

Chamfer Tool Must be used after Case Trimming. Unique design cuts fast without chatter. One turn does the job. Chamfers and deburrs inside and outside of case necks. Can also be used to remove the crimp from primer pockets of military brass. Works better than tools costing several times as much. 90109 3.98

Primer Pocket Cleaner Double ended design cleans both large and

small primer pockets. Primers can be fully seated for better accuracy and safety. Costs so little and works so well, no reloader can afford to be without one. 90101 2.98

Case Conditioning Kit Includes cutter and lock stud, chamfer tool and primer pocket cleaner.

90950 12.98

CUTTER only with BALL GRIP

90275 9.98

CUTTER and LOCK STUD 90110 6.98Fits cases up to .468” in diameter.

LARGE CUTTER & LOCK STUD 90401 9.98Can be used on any case.

THREADED LARGE CUTTER

AND LOCK STUD 90468 9.98Large cutter with 8–32 thread shank for use on popular powered case preparation centers.

29

ReLOADinG21

Assure your mixed brass is bulge free with the Bulge Buster Kit and appro priate Lee Carbide Factory Crimp Die. This push through die adapter will quickly remove the annoying bulge rings that shell holder constrained dies simply can’t reach. The Bulge Buster Kit includes extension sleeve, push through punch, catch container and complete instructions. And it’s fast — you can reprocess your cases as quickly as you can handle them.CARBIDE FACTORY CRIMP DIES, SEE PAGE 7

Bulge Buster Kit 90487 19.98

Ram SwagePrimer pocket swager works so fast that you’ll want to swage all the range brass you pick-up. Works on all single stage presses with ⅞”-14 threads and accepts universal press shell holders. Features spring assisted case extraction, and an

all steel case guide, ensures cases will be positively centered on push rod. Shell holderless design, allows you to swage any small or large primer pocket, without swapping to a different size shell-holder. 91617 50.00

BULGE BUSTER KIT shown mounted to Breech Lock

Reloader Press ( 90045 ). Sold separately, pg. 18

TRIMMING TOOLS CHART +and+ BULGE BUSTER KIT

UNLISTED RIFLE QUICK TRIM DIES can be custom made.

leeprecision.com/custom-rifle-quick-trim-die-body.html

Push throughPunch

Catch Container

Extension Sleeve

90867 380 ACP90862 10 mm 90862 40 S&W90416 41 AE90864 45 ACP90864 45 GAP90864 45 Win Mag

WITH THE LEE FACTORY CRIMP DIE, THE BULGE BUSTER WILL REPAIR ALL THESE RIMLESS CASES

308 Norma Magnum 91289308 Winchester 90231 9013932 Winchester Special 9049132-40 Winchester 91376 91312325 WSM 91344 90222327 Federal Magnum 91303338 Edge 91313338 Federal 90218338 Lapua 90462338 Remington Ultra Magnum 91314338 Winchester Magnum 90391 90149340 Weatherby Magnum 91346 91223348 Winchester 91360 9130435 Remington 90403 9015035 Whelen 91355 90972350 Legend 91561 91567350 Remington Magnum 91377 91315358 Winchester 91318358 WSSM 91378375 H&H 90395375 H&H or Ultra Mag 90164375 Ruger 90613 91285375 Socom 91319375 Super Magnum 91320375 Winchester 91371 9016540-65 Winchester 91384 91323416 Rigby 91324416 Ruger 9129443 Spanish 91367444 Marlin 91372 9015145/70 Government 90458 9015245/70 LEVERevolution 91287450 Bushmaster 91325450 Marlin 90554458 Lott 91326458 Socom 91290458 Winchester Magnum 91345 9097150 Beowulf 91292

50 BMG REQUIRES LARGE CUTTER90010 $22.00

6.5 Carcano 91353 900436.5 Creedmoor 90812 908146.5 Grendel 90763 912786.5 PRC 91348 915336.5 x 284 902236.5 x 55 Swedish Mauser 90337 901266.5-06 911086.5X284 913616.5X47 Lapua 91381 913306.5X50 Japanese 913316.5X57 Mauser 912916.8 SPC 90397 901896MM BR NOR/RE 912966mm Creedmoor 90658 913406MM PPC 91349 912826mm Remington (244 Rem.) 90434 901206MM TCU 912866MM XC 913286X45MM 913296X47 Lapua 91380 913027 x 57 Mauser 90489 90130

7 x 64 Brenneke 902367-30 Waters 913357.35 Carcano 912937.5 x 55 Swiss (Schmidt-Rubin) 90419 901327.5 x 54 MAS 91359 900517.62 x 39 Russian 90345 901337.62 x 54 Russian 90342 901477.62 x 40 Wilson Tactical 913007.65 x 53 Mauser (Belgian-Arg) 91382 901347.7 x 58 Japanese Arisaka 91368 90115*7mm Express/280 Rem. 90412 901667mm Remington Magnum 90297 901317MM RUM 913337MM STW 913327MM Weatherby Magnum 913347mm Winchester Short Mag 903147mm/08 90343 901677X64 Brenneke 913868x56 Aust-Hung Mannlicher 905898x57 Mauser 90347 901488MM Remington Magnum 913378X68MM S 912889.3x62 Mauser 90614 912999.3x74 R 9130122 TCM 913735.7 x 28 FN 91363 9021930 M1 Carbine 90365 901359mm Makarov 90181 906849mm Luger 90032 90153357 SIG 9131738 Super 90217380 Auto 90025 9015530 Herrett 912977.62X25 Tokarev 9133632 ACP 9133832 S&W 9131132 Smith & Wesson Long 9016932 H&R Magnum 9131032-20 Winchester 91365 9014638 S&W 9015638 Special 90085 9015738-40 Winchester 91351 9132238-55 Winchester 91379 90994357 Magnum 90088 90158357 MAX 9131640 S&W 90033 9015410mm Auto 90193 9012738 Short Colt 9132141 Magnum 90226 9015944-40 Winchester 91369 9016844 Special 90107 9016044 Magnum 90125 9016145 ACP 90073 9016245 Colt 90145 9016345 GAP 91473454 Casull 90174 90992460 S&W 90220480 Ruger REQUIRES LARGE CUTTER 90018 50 Action Express 91327

500 S&W REQUIRES LARGE CUTTER 90178 90019

QUICKTRIM DIE15.00

Ltd. Prod.QUICK

TRIM DIE20.00

CASELENGTHGAUGE7.50


GAUGE12.00

QUICKTRIM DIE15.00

Ltd. Prod.QUICK

TRIM DIE20.00

CASELENGTHGAUGE7.50


GAUGE12.00

LEE BULGE BUSTER KIT

UNLISTED CASE LENGTH GAUGES can be custom made.

leeprecision.com/custom-case-length-gauge.html

nEW

Utilize all your brass

by removing annoying

bulge rings


LEE PRECISION, INC.

AUTOAUTO BENCH PRIMEBENCH PRIME

Tray’s built-in flipping surface quickly rights and orients primers—go from box to priming in seconds. Patented elevator pin safely isolates a single primer for priming. Allows most primer brands and types to be safely tray fed. The convenient hinged cover allows you to individually feed primers if restricted by the primer manufacturer.

I n t r o d u c I n g

the next revolution in priming.

The world’s firsT auTomaTically case fed, shell holder-less priming Tool

t h e A c P

Metallic cartridge priming was revolutionized in

1979 with Richard Lee’s patented Auto Prime tool.

Today, the majority all hand-held priming tools share most, if

not all, features of the Original Auto-Prime. The new ACP truly

automates priming. Think of it as the “Real” AUTO-prime.

This is the nicest priming tool ever made. No shell holders

required; cases are guided into position by our new “finger

guide” — priming is positive, effortless and uniform. Positive

and consistent seating depth is assured with our new dead

length priming device. Primers are seated uniformly without

“feel” or adjustments required. Seating is almost effortless

as the priming tool shares the powerful

linkage of our Automatic Processing Press.

And the best feature is the ability to

automatically feed cases! Nothing else to

buy — will seat large and small rifle and pistol

primers. Automatically feeds and primes

cases up to 2 ½ inches long.

ACP ▾ AUTOMATIC CASE PRIMER

91610 120.00

AUTOMATICCASE PRIMER

Auto Bench Prime

90700 41.98

THE EASIEST, MOST CONVENIENT BENCH MOUNTED PRIMING tool ever. Symmetrical

design allows effortless right or left hand operation. Comfortable lever with just the right amount of mechanical advantage effortlessly seats even the most difficult primers with just finger pressure. Perfect mechanical advantage to feel the primer seating completely home into the primer pocket. Includes priming assemblies for large and small primers. Change primer size or shell holder in seconds. Includes the patented folding tray — go from box to priming in seconds. No need for a heavy bench; fits the Lee Bench Plate or mount to a board for a portable setup.

Folding Primer Tray

TWO PACK 90606 8.00

Pictured with UNIVERSAL CASE FEED MAGAZINESold separately #90242

Pictured with CASE COLLATOR #90667Sold separately pg. 23

Pictured ACP mounted to LEE RELOADING STANDSold separately #90688

Depriming KitUse your ACP as the world’s fastest, shellholderless deprimer. Great for those who tumble clean cases before reloading. Includes screw top catch bottle for spent primers and debris.

91714 10.00

acp

AUTOMATIC CASE PRIMING +and+ AUTO BENCH PRIME

nEW

31

ReLOADinG21

O F F P R E S S P R I M I N GO F F P R E S S P R I M I N G

Unfold tray and place on top of box of 100 primers.

Flip tray over to deposit the primers.

Shake tray to upright all twhe primers. Fold and close cover.

Slide the flow controlto L O C K.

# 1 · 2 · 3 · 4 · 5 · 7 · 8 · 9 · 10 · 11 · 19

RED STORAGE BOX ONLY 90196 4.98SHELL HOLDER SET 90198 23.98with 11 Shellholders for LEE PRIMING TOOLS AND THESE OTHER FINE TOOLS—K&M, SINCLAIR, F A PLATINUM, CPS, 21ST CENTURYPacked in a lifetime plastic box

SHELLHOLDER

FOR PRIMING TOOL

SHELL HOLDERS2.98

#1 90201

#2 90202

#3 90203

#4 90204

#5 90205

#6 90206

#7 90207

#8 90208

#9 90209

#10 90210

#11 90211

#12 90212

#13 90213

#14 90272

#15 90017

#16 90200

#17 N/A

#18 N/A

#19 90023

#20 90020

#21 90031

#24 91495

#25 91496

20 17 Hornet

4 17 Remington4 204 Ruger4 22 TCM

20 22 Hornet20 22 K Hornet3 22 Savage2 22 BR6 218 Bee

12 22 PPC3 219 Zipper

10 220 Swift4 221 Fireball4 222 Remington4 222 Rem. Magnum4 223 (5.56mm)5 223 WSSM2 224 Clark (22/257)

21 224 Valkyrie10 225 Winchester2 22/2502 240 Weatherby2 243 Win.5 243 WSSM2 6mm Remington2 244 Remington2 6mm Int’l2 6mm/2842 6mm/06

12 6 PPC4 6 x 47 (6mm/222M)2 25/2845 25/3032 25/066 25/20 Winchester

2 250 Savage3 25/354 25/45 Sharps2 257 Roberts5 257 Weatherby2 6mm Creedmoor2 6.5mm Creedmoor2 6.5mm 062 6.5mm x 573 6.5 x 55 Mauser

10 6.5 Jap5 6.5 Rem. Magnum2 6.5 Carcano

12 6.5 Grendel5 264 Win. Magnum5 26 Nosler

21 6.8 SPC2 270 Winchester5 270 Weatherby5 270 Win S Mag2 280 Remington2 7mm/082 7mm BR4 7mm TCU3 7 x 30 Waters

2 & 10 7 x 57mm Mauser5 7 x 61 Sharpe & Hart5 7mm Rem. Magnum5 7mm Win S Mag5 7mm Weatherby5 7mm Ultra Mag 2 284 Winchester 3 7.5mm Schmidt-Rubin7 30 M 1 Carbine

3 7.65x53 Arg. Mauser

12 7.62mm x 3916 7.62x54 Russian3 30 Herrett3 30/30 Win. (30 WCF)2 300 Savage

16 30/37821 30 Remington2 308 Win. (7.62 NATO)4 300 AAC Blackout5 30/40 Krag (30 U.S.)2 30/06 Springfield5 300 H & H5 300 Weatherby5 300 Win Magnum5 300 Ultra Magnum5 300 Win S Magnum 5 308 Norma Magnum5 303 British2 7.7 Japanese3 32 Win. Spc’l3 32 Win. S.L.6 32/20 (32 W.C.F.)3 32/40 Winchester2 8 x 57 Mauser2 8mm 062 8mm Man. Schoe.5 8mm Rem. Magnum

17 8mm Lebel16 8x56R Hungarian8 33 Winchester

25 338 Lapua5 338 Win. Magnum5 338 Ultra Magnum5 340 Weatherby8 348 Win.

2 35 Remington5 35 Winchester2 35 Whelen5 350 Rem. Mag.3 356 Winchester2 358 Winchester5 358 Norma Magnum3 375 Winchester5 375 H & H5 375 Weatherby5 375 Ultra Magnum5 375 Ruger

14 38/40 Win.3 38/55 Winchester8 40/82 Winchester5 416 Remington

25 416 Rigby18 43 Mauser17 43 Spanish14 44/4011 444 Marlin8 45/70 Gov’t2 450 Bushmaster

5 458 Win. MagnumHOLDER PISTOL

15 5.7 x 281 22 Rem. Jet


19 30 Luger19 30 Mauser4 32 Short Colt4 32 Long Colt4 32 S & W 4 32 S & W Long

7 32 ACP

4 32 Colt N.P.

4 380 Auto

19 9mm LUGER

1 38 S & W

1 38 Colt N.P.

19 38 Super Auto

19 38 ACP

1 38 Short Colt

1 38 Long Colt

1 38 Special · 357 Mag

19 357 Sig

2 357 Auto Magnum

19 40 S&W · 10mm Auto

1 41 Long Colt

19 41 Action Express

9 41 Magnum

11 44 S &W Spl · 44 Mag

11 44 S & W Russian

2 44 Auto Mag.

2 45 Auto

11&14 45 Colt

14 45 Schofield

11 454 Casull

14 460 S&W

5 455 Webley

13 45 Auto Rim

3 45 Win. Magnum

5 &16 480 Ruger

5 475 Linebaugh

16 500 S&W

HOLDER PISTOLHOLDER RIFLE HOLDER RIFLEHOLDER RIFLEHOLDER RIFLE

PATENTED

ALL OFF-PRESS PRIMING TOOLS USE SPECIAL, BUT INEXPENSIVE PRIMING TOOL SHELL HOLDERS, SO THERE’S NO NEED TO ENDLESSLY SWAP PRESS SHELL HOLDERS TO PRIME.

New Auto -Prime

The original and world's most popu-

lar hand-held priming tool. Fast and

economical hand held priming with

unmatched feel and accuracy. Comes

packed in a convenient storage box

to keep your tool and shellholders

together. 90230 31.98

Save even more! Purchase a kit!

Priming Tool KitIncludes the New Auto-Prime, and nice molded storage box. Holds everything, including a complete set of shell holders. This kit comes with 8 of the most popular priming tool shell holders, works with over 130 different cartridges. 1, 2, 3, 4, 5, 11, 12, 19. Holds an additional 8 shell holders. This kit is a convenient way to keep your tool and shell holders all in one spot.

90215 41.98

Set of ShellholdersEleven of the most popular sizes fit over 115 different cartridges. The chart ( below ) is included with each shell holder set.

Priming Tool Storage BoxHolds your Ergo-Prime or New Auto Prime tool. With room for 18 priming tool shell holders. 90426 5.98

Lee Ergo-Prime

Premium hand held priming tool with all the

features of the world’s most popular Auto-

Prime, with ERGOnomic design. The Ergo

Prime’s highly sculpted body fits your

hand perfectly, along with a long smoothly

contoured finger lever that easily installs

the tightest primers. Fingertip operation

provides unmatched sensitivity and comfort,

especially for older hands. Change primer size

in an instant—no tools or disassembly required,

simply remove shell holder and swap prim-

er assembly. Powder coated metal body

and polished chrome plated lever makes

the Ergo-Prime not only the

most comfortable, but also

the best looking tool made.

Comes packed in a convenient

storage box to keep your tool

and shellholders together.

90250 49.00

New, removeable tray

COMFORT GRIP

HAND PRIMING TOOLS+and+SHELLHOLDERS


LEE PRECISION, INC.

FREE STURDY STEEL MOUNTING BRACKET INCLUDED WITH EACH MEASURE

TheThe Original Original Perfect Powder Measure

Lee Safety Scale Safety and accuracy are the

most important features

This is the only scale that can never get out of adjustment.

The beam is made from a very tough phenolic, the same

type material used on table and counter tops. Phenolic is

tough but, like glass, it can’t be bent. Even if dropped you

can feel confident that if it did not break it is still accurate.

Sensitive and readable to 1 / 20 grain.

90681 43.98

Powder FunnelA large, unbreakable funnel that fits all cases from .22 to .45 caliber. Hole in flange

permits mounting to the Lee Turret Press, shelf or

bench.

90190 3.98

Lee Powder Measure KitFifteen uniformly graduated and proportioned powder dippers. Slide card shows the grains of powder each measure will dispense of every type of powder. Powder measures are inherently safe as they cannot get out of adjustment. That’s why powder dippers continue to be the first choice of reloaders who load in small quantities.

90100 13.98QUICK CHANGE DRUM SET features four precision molded nylon drums. Two small capacity for cases as small as the 25 ACP, adjustable to 223 size rifle cases. Large capacity drums adjustable from 223 case to cases as large as the belted magnums. The large drums include an insert to allow reduced capacity charging like the small drum. All drums are infinitely adjustable within range. No tools required for adjustment. A graduated adjustment key is included with each drum. Each key is marked with .01cc graduations, allowing easy 1/10-grain powder adjustments.

Quick Change Drum Set 90453 20.00

Powder Measure Stand

Heavy, powder coated steel construction

7/8” mounting hole for all popular measures

Includes 3 no slip feet

Rock solid mount improves measure consistency

Space saving freestanding design is portable and convenient.

Works with other brands of powder measures

Powder Measure Stand 90587 35.00

PERFECT FOR USE WITH THE DELUXE PERFECT POWDER MEASURE

& AUTO-DRUM

INCLUDES THE NEW POWDER MEASURE BOTTLE ADAPTER

READ THIS if you already have a combination bullet and powder scale

Try this simple test to see how sensitive your scale really is. Cut a piece of regular writing paper or this catalog 5/16 inch square. With scale set on zero — drop the paper on the pan to see if it moves. It

should read about .1 grain. Keep adding paper squares until it does move. The total number of squares needed to move your scale is your scale’s sensitivity. We have seen digital powder scales that are only sensitive to 1/2 grain (FIVE paper squares!) A Lee Safety Scale will move with the first paper.

PICTURED ON OPTIONAL STAND # 90587, SOLD SEPARATELY

Almost as good as a scale! Solves problems common to ordinary drum type measures. Gives you the confidence that your charges will be the most uniform possible.

Lee Perfect Powder MeasureIncludes many of the features of the

Deluxe Perfect Powder Measure, but

the body is molded from an engineering

grade polymer. Rotating micrometer

adjustable metering chamber and

elastomer wiper to prevent powder

cutting. Works better than other powder

measures priced four times as much.

90058 30.98

DELUXE PERFECT POWDER MEASURE.

QUALITY CONSTRUCTIONThis powder measure features a high pressure die cast, diamond-machined body.

The precision-machined rotor drum is cast from brass, which is naturally anti-static

and spark proof.

ELIMINATES CUT POWDER AND JERKY ACTIONA soft elastomer wiper strikes off the metering chamber rather than cut the powder. You’ll be surprised at how smoothly the rotor operates. More importantly, you will enjoy the most uniform of charges.

EASY TO SET & READ MICROMETER METERING CHAMBER Powder charge adjustment is accomplished with a true micrometer adjustable metering chamber. The metering chamber is aluminum with a black anodized finish. Features a crisp, permanent, laser engraved scale. The brass micrometer thimble is engraved with .01cc graduations and has a releasable detent lock. With most rifle powders each click is about a 1/10 of a grain, perfect for working up a load.

CHANGING POWDER IS FAST AND EASYFeatures easily removable hopper with an on/off valve so you can quickly return unused powder to its original container or switch to another type. The hopper feeds to a pre-measuring chamber allowing precise charges regardless of the powder level in the hopper, eliminates the need for an extra powder baffle.

QUICK CHANGE DRUMSOne of the nicest features is the ability to use the new Lee standard quick-change

drums (product # 90453). These low cost drums can be preset to your favorite charge and swapped out in seconds.

DELUXE PERFECT POWDER MEASURE 90699 80.00

NO POWDER MEASURE, REGARDLESS OF PRICE,

HAS ALL THE FEATURES OF THE LEE DELUXE POWDER MEASURE

DELUXE PERFECT POWDER MEASURE +and+ THE ORIGINAL

POWDER MEASURE BOTTLE ADAPTER

Powder measure bottle adapter fits all Lee powder measures

Allows dispensing powder directly from the shipping container of most popular powder manufactures. Includes a crystal clear bottle that holds over a half a pound of ball powder. Works on all of these and many more. (53mm or 43mm thread) Dispensing powder directly from the bottle assures positive iden-tification of the powder type. Adapter is manufactured from Polypropylene —resistant to attack from all

types of powder. Now you can turn off the powder flow and store your powder in its original container with no fear of misidentifying or damage to your hopper from chemical attack. Viewing window allows monitoring powder level in use without removing bottle.

Bottle Adapter 91586 8.00


33

ReLOADinG21

The Pro Auto-Disk comes with a complete set of four disks. Each disk has six cavities, so you get 24 cavities in all. The chart included on the rear of the instruction sheet lists the capacity of each cavity with every type of powder. If you reduce your charge 10% you can safely use this data without weighing your charge. Fixed cavities are the safest way to meter powder because they can’t be misadjusted or get out of adjustment.

Double Disk Kit (not pictured)This kit raises the hopper so you can stack two disks. Not only doubles the capacity of the disks but it makes very fine adjustments possible. Most powders can be adjusted up or down .1 grain with different combinations of disks. Complete listing of combina-tions, 4 extra disks, screws and risers are included.

Lee Double Disk Kit 90195 14.98

Adjustable Charge BarInfinitely adjustable between .28 and 1.6 cc. Lifetime nylon with solid brass, zero backlash microme-ter. Easy to set.

Adjustable Charge Bar

90792 9.98

Lee Pro Auto-Disk Powder MeasureCommercial reloaders or competitive shooters first

choice! Elastomer wiper and polytetrafluoroeth-

ylene (PTFE) non-stick metal casting make this the

smoothest operating measure. Large hopper with

integral shut-off valve makes changing powder or

disks super convenient. Brass thumbnuts attach the

hopper to the body so you can change disks with no

tools. Rubber wiper and seal prevents powder shearing

and makes it more leak-resistant with fine-grain pow-

ders. Increased safety with positive pull-back lever.

The measure is attached to the die with a swivel

adapter, allowing easy positioning and quick removal

when changing cartridges. Included positive pull

back lever reduces the chance of double charge when

progressive reloading.Lee Pro Auto-Disk Powder Measure INCLUDES ALL FOUR DISKS

90429 58.00

PRO AUTO-DISK POWDER MEASURE

CARTRIDGE RANGE 9 MM TO 45 COLT

USE IDEAL FOR HANDGUN

SIMPLE SET UPNOTHING TO ADJUST, NOTHING TO GET OUT OF ADJUSTMENT

USE LEE PUBLISHED LOAD DATA

CONSISTENCY EXTREMELY CONSISTENT INCREMENTAL CHARGES

WIPER TO PREVENT POWDER SHEARING

YES

SWIVEL ADAPTER FOR FAST, EASY TRANSFER

YES

ON/OFF VALVE YES

PRO AUTO-DISK ACCESORIES

NOTE Pro Auto-Disk and Auto-Drum Powder Measures must be used with the powder through expanding die supplied with all Lee pistol dies, or Lee Rifle Charging Dies (see left). These dies may be purchased individually. Sizes listed on page 8.

Powder Measure RiserInstalls between the Lee Powder through Expanding Die or Rifle Charging Die and Powder Measure. Allows convenient use of other brands of dies that have extended adjusting screws and provides clearance for the Lee Safety Prime.

Powder Measure Riser 90041 9.98

Lee Rifle Charging Die KitShort and Long Charging Dies are included. These dies work the same as the pistol powder through expanding dies, except they do not expand the case mouth. Rifle case expansion is done in the sizing die. Can be used on 22 caliber, and up to the largest belted magnums.

Charging Die kit

90995 26.00SHORT CHARGING DIE22 HORNET TO 223 REM 90668 14.98LONG CHARGING DIE223 REM TO 300 WIN MAG 90194 14.98

Case actuated; never spill a charge.

Exclusive elastomer wiper prevents powder shearing, works great with difficult metering extruded powders.

Machined body with labyrinth groove mates to precision molded nylon drums providing leak free fit with the finest powders.

Drum is actuated by a steel sector and pinion gear train.

Quick-change hopper has on/off valve Sleek modern design, all gears springs and levers inside the die cast housing.

Same swivel adapter as our famous Pro Auto-Disk powder measure. Makes moving measure fast and convenient.

HANDGUN AND RIFLE DRUMS INCLUDED.

AUTO-DRUM POWDER MEASURE 90811 54.00

Automatic case actuated drum powder measure. Accurately and automatically

dispense powder in your favorite cartridge. Two infinitely adjustable drums

included. Quick Change drums will accurately and reliably drop charges from

1 to 80 grains of powder.

AUTO-DRUM POWDER MEASURECARTRIDGE RANGE 25 AUTO TO 300 WIN MAG

USE IDEAL FOR BOTH HANDGUN AND RIFLE

ADJUSTABILITYINFINITELY ADJUSTABLE WITH INCLUDED SMALL AND LARGE QUICK CHANGE DRUMS

CONSISTENCYEXTREMELY CONSISTENT .01 CC INCREMENTAL CHARGE ADJUSTMENT

WIPER TO PREVENT POWDER SHEARING

YES

SWIVEL ADAPTER FOR FAST, EASY TRANSFER YES

ON/OFF VALVE YES

CHARGE CASES WHILE

EXPANDING +the+ CASE MOUTH

“modern reloading” and all popularlee die sets include load data

POWDER THROUGHEXPANDING DIEpg. 8

AUTO DRUM

PRO AUTO-DISK +and+AUTO DRUM POWDER MEASURES


Only Lee Dies permit charging the case while expanding thecase mouth.


LEE PRECISION, INC.

WELECTRIC MELTERS

Lee Production Pot IVLarge, deep pot holds approximately 10 pounds of lead. Melt time is less than 20

minutes. Pour spout up front where it belongs so you can see what you’re doing. Infinite

heat control. Uses only 500 watts of power during heat-up and a lot less to maintain

temperature. Large, stable base for safety. 4’’ of clearance under the spout is high

enough to accept all brands of bullet molds and most sinker molds.

PRODUCTION POT IV 110 VOLT 90009 90.98EXPORT MODEL 220 VOLT 90008 95.98

Lee Precision Melter

High speed melter with an infinite heat control for the budget

caster. Easily handles 4-cavity molds. Takes less than 15 minutes

to melt 4 pounds of metal. Same infinite heat control as used

on the Production Pot. 500 watts AC only. Guaranteed 2 years.

PRECISION MELTER, 110V 90021 58.98EXPORT MODEL, 220V 90024 60.98

LEE INGOT MOLDUse to cast 1/2 and one pound ingots.

Perfect for remelting and alloying. Wood

handles stay cool. Aluminum mold is

lightweight and rustproof.

90029 20.98

LEE LEAD LADLEA convenient size ladle for bullet casting.

Works equally well for right and left handers.

Handy for skimming and stirring metal.

90026 6.98

Lee Pro 4–20

Large diameter high capacity pot, holds approximately 20 pounds of

lead. Nearly 4 inches of clearance under the spout accepts all brands

of bullet molds and most sinker molds. It also includes an adjustable

mold guide to quickly and accurately position any mold for pouring.

This second generation design incorporates the famous Lee patented

high-efficiency design and dependable remote sensing thermostat, in a

dust tight housing. Long life 700-watt tubular heating element assures

quick melting and rapid recovery. Micro adjustable, flow control valve

adjusts instantly with a twist of the screwdriver. Front mounted low

maintenance replaceable valve spout allows instant reseating with a

turn of a screwdriver.Lee Pro 4-20 90947 110 Volt 108.00Lee Pro 4-20 90948 220 Volt 112.00

Magnum Melter

Large 4” diameter pot allows easy access for the ladle caster.

Same high efficiency design that has made Lee pots the most

popular. Melt time is less than 20 minutes with just 700 watts.

20-lb. capacity for the longest casting session.

Magnum Melter 110 Volt 90949 82.00

LeeLee MAKES

BULLETCASTINGEASIERß

LEE MOLD MALLETFeatures ash hardwood construction.

Cut the sprue and release the bullets

with one handy tool. Ergonomic design

makes it convenient and comfortable to

use with long casting sessions. Mallet is

10 inches long.

90084 10.00

UNIQUE UNIQUE INFINITE INFINITE

HEAT CONTROLHEAT CONTROL

A highly reliable control, mounted away from the high heat of the

pot. Eliminates failures usually associated with

thermostatically controlled units.

Thermal feed back to the infinite control

permits heater to put out full power

until metal has melted.

WARNING Melting lead and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, www.P65Warnings.ca.gov. See instructions on REDUCING EXPOSURE supplied with product.

ELECTRIC MELTERS

ReLOADinG21

BULLETDIAMETER

BULLETSIZER &PUNCH

12.00

CLASSICBULLET

SIZING KIT25.98

.224 91505 90049

.225 91506 90036

.243 91507 90083

.278 91508 90261

.284 91509 90170

.285 91510 90171

.308 91511 90037

.309 91512 90038

.311 91513 90039

.314 91514 90044

.323 91515 90686

.329 91516 90934

.339 91517 90576

.356 91518 90046

.357 91519 90047

.358 91520 90048

.401 91521 90060

.410 91522 90052

.427 91523 90053

.429 91524 90054

.430 91525 90062

.451 91526 90061

.452 91527 90055

.454 91528 90056

.457 91529 90057

.501 91530 90191

.510 91531 90188

Gently shake bullets in an orbital motion to coat the bullets. If they do not coat completely, add a little more lube.

Spread bullets onto waxed paper and let dry overnight.

Lee Liquid AloxLee Liquid Alox gives better accuracy because it eliminates leading. The lube

coats the entire bullet like a thin jacket and dries to a soft, varnish-like finish

that really clings. The dried coating does not degrade gun powder. Easy to apply;

eliminates the need for sizing of most cast bullets. While it works well with all

cast or swaged bullets better than any other lube, it works most ecomonically

with micro band bullets, which are designed for tumble lubing.

4 OZ. DISPENSER BOTTLE 90177 6.98

Enough for thousands of bullets

Try this

with your bullet lubricant

The bullet melts while the Lee Liquid Alox clings tenaciously to the bullet

35

LUBRICATION +and+ SIZING

Breech Lock Bullet Sizer Kit

works in any Breech Lock Press. Uses

inexpensive bullet sizer and punch, see

listing right.

The quick change body accepts our new,

low cost bullet sizer and punch. The new

sizer is produced of high carbon steel, and

specially tapered to reduce sizing effort.

Bullets are sized nose first—this is

the most accurate and causes the least

distortion.

Best of all, no special top punches are

required. Will seat and crimp gas checks

while sizing.

Great for powder coated or liquid

lubricated bullets. All bullets must be

lubricated, order Lee Liquid Alox

or your favorite coating. Order

appropriate bullet sizer and

punch, see listings at right.

Breech Lock Bullet Sizing Kit

91532 15.00

Traditional bullet lubricating methods of placing lube only in the grooves are inferior to the modern method of coating the entire bullet with Lee Liquid Alox. This places the lube where needed, on the surfaces that rub against the bore.

L U B R I C A T I N G B U L L E T S

Universal Case Expanding DieGently flares the case mouth to accept cast bullets without shaving. Works great to prevent damaging the moly and low friction coatings found on today’s high performance jacketed bullets. Includes neck plugs for .22 cal through .45 cal. Works on everything from the 22 Hornet to the largest Ultra Mag. Costs so little and works so well you can’t afford to be without one.

90798 16.98

Order bullet sizer

and punch right

Bullet Sizer and Punch

12.00

BREECH LOCK BULLET SIZER KIT FASTEST AND EASIEST WAY TO SIZE CAST BULLETS

GET INCREDIBLY FAST BULLET SIZING

with the LEE APP See pg. 27

Hardness Testing KitFeatured product in Chapter 10 “Modern Reloading.” No more wasted components shooting too soft or too hard lead. Cast and load with confidence knowing your alloy is up to the job. Quickly and precisely check hardness of your lead alloy. Exclusive conversion chart tells the maximum operating pressure of any lead alloy.

90924 95.00 I N C L U D E S

CALIBRATED HARDENED STEEL BALL INDENTER

V” BLOCK CRADLE SNAPS INTO STANDARD PRESS RAM

20 POWER 4 LENS OPTICAL MEASURING MICROSCOPE

Other sizes can be made on a custom basis. See web for details.leeprecision.com/custom-lube-and-sizing-kit.html

Other sizes can be made on a custom basis. See web for details.leeprecision.com/custom-breech-lock-bullet-sizer-punch/

Classic Bullet Sizing Kit

Standard ⅞ x14 threads fit any reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches

are needed. Gas checks are auto matically seated and crimped in place. Sized

bullets captured in the special container. COMPLETE FOR ONE SIZE 25.98

Bullets must be lubricated for sizing, order Lee Liquid Alox below,

good for thousands of bullets.

shown with optional bottle adapter →

91151 6.00

Includes bottle that holds 100 bullets. Adapter also fits most powder containers for larger capacity.


LEE PRECISION, INC.

R I F L E B U L L E T M O L D S

2 2 C A L 2 7 0 7 m m 3 0 C A L I B E R R I F L E 7 . 6 2 X 3 9 3 0 3 B

BALLISTICCOEFFICIENT

MOLD

.155 .310 .305 .154 .163 .224 .252 .268 .317 .352 .688 .268 .276 .247

C225-55-RF C277-135-RF C285-130-R C309-113-F C309-120-R C309-150-F C309-160-R C309-170-F C309-180-R C309-200-R TL309-230-5R C312-155-2R CTL312-160-2R C312-185-1R

DOUBLE 90451 90454 90360 90362 90364 90366 90367 90368 90369 90370 90307 90385 90361 90371

6 CAVITY 90459 90741 90579

LUBE & SIZE 90036 90261 90171 90038 90038 90038 90038 90038 90038 90038 90038 90039 90039 90039BL BULLET

SIZER 91506 91508 91510 91512 91512 91512 91512 91512 91512 91512 91512 91513 91513 91513

BEST SUBSONICREQUIRES FAST TWIST RIFLING Bullet Design C.E.

LEE MOLD BLOCKS MADE FROM ALUMINUM BECAUSE OF THE EXCEPTIONAL MOLDING QUALITIES MOLD CAVITIES CNC–MACHINED FOR UNMATCHED ROUNDNESS AND SIZE CONTROL

MOST BULLETS FROM LEE MOLDS CAN BE USED AS CAST WITHOUT SIZING

DOUBLE CAVITY MOLDSHandles and sprue plate included. 29.98

HOLLOW BASE MOLDS

These are available in single cavity only. They have self centering

automatic core pins for the fastest possible molding. Handles and

sprue plate included. 30.98

SIX CAVITY COMMERCIAL QUALITY MOLDS

These are made for heavy duty volume production. The mold

blocks have steel bushing and alignment pins for lasting

precision. Price includes a cam operated sprue plate to elim-

inate the pounding common to ordinary molds. The sprue

plate is hard anodized and held down with wave washers

at each end. No finer mold can be purchased at any price.

Handles extra. 59.00

MOLD HANDLES

Precision steel mold handles fit not only the Lee Six Cavity molds

and 18 Cavity Buckshot molds, but most other brands of one

and two cavity molds. Priced low enough so you can have a set

for every pair of blocks.

90005 25.98

MICRO BANDS USUALLY REQUIRE NO SIZINGThe bullet shank has many shallow grooves for maximum liquid lubricant retention. A great way to make bullets in quantity with minimum time, effort and equipment. More accurate than ordinary cast bullets. The reduced friction of the micro bands gives you more velocity with less pressure.

MOLD NUMBER CODE

C 309 230 RGAS CHECK

TL Micro Band

WEIGHTIN GRAINS

WCWAD CUTTER

SWCSEMIWAD CUTTER

RFROUND WITH FLAT

R1 OGIVE RADIUS

2R2 OGIVE RADIUS

TCTRUNCATED CONE

DIAMETER

TRADITIONAL GROOVE

This type of lubrication groove is designed for old style hard lubricants. Also works well with Lee Liquid Alox.

MICRO BAND GROOVEFOR LIQUID ALOX #90177

The reduced friction of the micro bands allow a higher velocity with the same pressure as conventional lube grooves.

HOLLOW BASE

POINT SHAPE

8 m m 8 x 5 6 3 3 8 C A L 3 5 R E M 375 Win 38/55 4 5 - 7 0 C A L I B E R R I F L E 5 0 - 7 0 C A L


MOLD

.216 .361 .250 .186 .250 .211 .225 .250 .250 .278 .443 .220 .283

C324-175-1R C330-205-1R C338-220-1R C358-200-RF 379-250-RF 457-340-F 457-405-F 459-405-HB 457-450-F C457-500-F 459-500-3R 515-450-F 515-500-F

DOUBLE 90274 90775 90372 90449 90324 90373 90374 90375 90376 90577 90255 90266

6 CAVITY 90016

HOLLOW 90268

LUBE & SIZE 90686 custom 90576 90048 custom 90057 90057 custom 90057 90057 custom custom customBL BULLET

SIZER 91515 custom 91517 91520 custom 91529 91529 custom 91529 91529 custom custom custom

RIFLE BULLET MOLDS

37

ReLOADinG

P I S T O L B U L L E T M O L D S

32/20 · 32S&W LONG · 32 COLT NP 3 8 S P E C I A L • 3 8 S & W • 3 8 C O LT N E W P O L I C E • 3 5 7 M A G


MOLD

.125 .174 .100 .106 .116 .142 .072 .072 .131 .117 .117 .207 .160

311-93-1R 311-100-2R TL314-90-SWC 358-105-SWC 358-125-RF 358-140-SWC TL358-148-WC 358-148-WC 358-150-1R TL358-158-SWC C358-158-SWC TL358-158-2R 358-158-RF

DOUBLE 90300 90301 90311 90316 90574 90318 90279 90312 90328 90321 90322 90388 90303

6 CAVITY 90308 90315 90306 90317 90294 90380 90326 90295 90327 90319 90692

LUBE &SIZE 90039 90039 90044 90048 90048 90048 90048 90048 90048 90048 90048 90048 90048BL BULLET

SIZER 91513 91513 91514 91520 91520 91520 91520 91520 91520 91520 91520 91520 91520

44 SPECIAL • 44 MAGNUM • 44/40 4 5 A C P • 4 5 A U T O R I M • 4 5 C O LT


MOLD

.124 .196 .169 .218 .090 .127 .140 .127 .145 .189 .146 .146

429-200-RF 429-240-2R TL430-240-SWC C430-310-RF 452-160-RF 452-200-SWC 452-200-RF TL452-200-SWC 452-228-1R TL452-230-2R TL452-230-TC 452-230-TC

DOUBLE 90285 90341 90299 90858 90570 90348 90234 90463 90351 90346 90287 902906 CAVITY 90428 90339 90357 90227 90310 90697 90379 90352 90350 90286 90289

LUBE &SIZE 90054 90054 90062 90062 90055 90055 90055 90055 90055 90055 90055 90055BL BULLET

SIZER 91524 91524 91525 91525 91527 91527 91527 91527 91527 91527 91527 91527

9MM LUGER • 38 SUPER AUTO • 380 AUTO 9mmMAKAROV 40 S&W • 10 MM AUTO 41 MAGNUM 44 SPEC • 44 MAG • 44 /40


MOLD

.107 .105 .123 .164 .127 .166 .093 .117 .141 .141 .110 .119 .111 .124

TL356-95-RF 356-102-1R 356-120-TC TL356-124-2R TL356-124-TC 356-125-2R 365-95-1R 401-145-SWC TL401-175-WC 401-175-TC 410-195-SWC TL410-210-WC 429-214-SWC C429-240-SWC

DOUBLE 90601 90305 90239 90464 90238 90309 90466 90470 90431 90256 90330 90335 90336 90338

6 CAVITY 90672 90387 90465 90402 90457 90433 90690 90483

LUBE &SIZE 90046 90046 90046 90046 90046 90046 custom 90060 90060 90060 90052 90052 90054 90054BL BULLET

SIZER 91518 91518 91518 91518 91518 91518 custom 91521 91521 91521 91522 91522 91524 91524

45 ACP | 45 AUTO RIM 45 COLT

45 COLT454 CASULL 475 LINEBAUGH 500 S&W


MOLD

.136 .210 .233 .271 .296

452-252-SWC 452-255-RF C452-300-RF 476-400-RF C501-440-RF

DOUBLE 90356 90358 90359 90241 90991

6 CAVITY 90349 90228

LUBE &SIZE 90055 90055 90055 custom 90191BL BULLET

SIZER 91527 91527 91527 custom 91530

CUSTOM MOLDS We can produce custom bullet molds within

certain limits. The prices are the same as our standard molds, but there

is a tooling and set-up charge of $250.00. If interested in this service,

please access design assistance sheet on www.leeprecision.com. This

outlines the basic limitations of our manufacturing process.

CUSTOM BREECH LOCK

BULLET SIZERS

WORKS GREAT IN 9MM LUGER

Unique venting on the mold face and sprue plate mating surface allows consistent and effortless fill out.

L E E M O L D S F E A T U R E


TROCHOIDAL VENTING

PISTOL BULLET MOLDS


LEE PRECISION, INC.

RIFLING·ENGRAVED·AT·LOADING The driving bands are large enough to adequately engage the rifling when pushed into the muzzle, and thin enough to easily engrave. They’re strong enough to withstand maximum charges without stripping or gas cutting.

UNIQUE CLEANING ACTION You can shoot all day without cleaning your rifle between shots! When inserted into the muzzle, tiny scraping edges are swagged forward on each driving band. These perfect fitting scrapers remove the fouling from the previous shot.

EASIER, FASTER TO LOAD It’s easy to load straight and true, easier and faster than a round ball with patch. Easily stabilized with very light

charges, the R·E·A·L bullet also retains accuracy with maximum loads. Each band is generously tapered to the rear with an angle close to that of a lathe center, so as to center the bullet against the rifle bands. When pushed in, the bullet automatically centers in the bore.

MORE ACCURATE The bevel base of the R·E·A·L bullet contributes to greater accuracy. When the bullet exits the bore, the gas escapes equally around the perimeter of the base. The uniform bevel is resistant to nicks that would permit gas to escape prematurely and cause a jet effect on one side of the bullet.

Cast Minie BulletsCast Minie Bullets as fast as Round Ballsas fast as Round Balls

R I F L I N G · E N G R A V E D · A T · L O A D I N G

A solid bullet that loads easily even after many firings because of its unique

cleaning action. Will not tumble. A perfect hunting bullet with heavy

loads. Easy to cast. Shoots accurately even in greatly oversize barrels.

DOUBLE CAVITY WITH HANDLES 29.98

Conical Bullet Mold FOR BLACK POWDER

REVOLVERSA super accurate bullet that is easy to

load straight and true. Two lube grooves

prevent flash ignition and lead fouling.

More energy and far greater accuracy

than round balls.

36 Cal. 375-130-1R 90378

44 Cal. Rem. 450-200-1R 90382

44 Ruger Old Army 456-220-1R 90384

29.98 DOUBLE

Original Style Minie Bullet

58 Caliber 575-500M 90481

An extremely popular, traditional size Minie bullet.

Available in 58 caliber only. Certainly a must for

authentic muzzle loading shooting.

Minie Bullet MoldAutomatic Core Pin Mold. Open mold upside down to empty. Close it and you’re

ready to cast the next. The core pin automatically centers in the mold. Easily

cast 200 per hour. A quality mold built to last as long as your rifle.COMPLETE w/ HANDLES and AUTOMATIC CORE PIN 39.98

Grains Double

45 Cal. 200 90390 45 Cal. 250 90392 50 Cal. 250 90394 50 Cal. 320 90396 54 Cal. 300 90398 54 Cal. 380 90400 58 Cal. 440 90404

Combo Molds45 CAL 200RB with Handles 90405 29.98Double cavity mold casts one 45 Cal. 200 R·E·A·L bullet and one .440 diameter Round Ball.

50 CAL 320RB with Handles

90488 29.98Double cavity mold casts one 50 Cal. 320 R·E·A·L bullet and one .490 diameter Round Ball.

R ·E·A·L BULLET f o r MUZZLE LOADERS

Round Ball MoldsHave tangential cut off which eliminates the

objectional nib at the sprue.DOUBLE CAVITY WITH HANDLES 29.986–CAVITY WITHout HANDLES 59.00

SIZE DOUBLE SIZE DOUBLE SIZE DOUBLE

.311 90406 .440 90436 .535 90456

.319 90410 .445 90438 .562 90460

.350 90415 .451 90440 .575 90461

.360 90418 .454 90442 .600 90975

.375 90420 .457 90444 SIZE SINGLE

.380 90423 .490 90448 .690 90978*

.390 90424 .495 90450* Due to the diameter, mold

ships as a single cavity.

.395 90425 .500 90452 SIZE 6 CAVITY

.433 90432 .530 90283 .490 91711▲

Improved Minie, Traditional Design

45 Cal. .450-294M 9046745 Cal. oversize .454-298M 9046950 Cal. .500-360M 9047254 Cal. .533-410M 9047354 Cal. oversize .540-415M 9047458 cal. .575-472M 9047658 cal. oversize .578-478M 90478

Improved design is easier to cast and load.

Usually more accurate; a wider variety of sizes.

Modern Minie, Target Design

50 Cal. .500-354M 90471

The most accurate of all Minies. Makes nice, clean

holes in the target. The first choice for highest scores.


BLACK POWDER BULLET MOLDS

▲ Handles #90005 25.98

39

ReLOADinG21

Lee Load-All IILee Load-All II shotgun shells not only look better

than those loaded on machines costing hundreds of

dollars, but they usually have more uniform velocity

and patterns. You can load just as fast as with any

other brand of loader costing up to $200.

Twenty-four shot and powder bushings are includ-

ed free. The bushings alone can cost several dollars

each from other man ufacturers— and they’re not as

accurate as those made by Lee. Only Lee supplies

molded bushings.

This is a time proven tool. There are hundreds of

thousands in use world wide: in nearly forty years,

we have yet to see one worn out. Written two-year

uncond itional guarantee and a lifetime warranty.

Load-All OptionsConversion To Another Gauge

The Load-All II can be easily and

economically converted to another

gauge with the conversion kit. The

entire die carrier is replaced so no

ad just ments are needed. The con-

ver sion kit includes the die carrier,

steel sizer, wad guide, shell holder,

load data and instructions.CONVERSION KIT 27.9812 GAUGE 9007016 GAUGE 9007120 GAUGE 90072

Lee Adjustable Shot Dipper

Accurately measure lead, bismuth

and steel. Telescoping cup

adjustable from 7/8 to17/8 oz.

Calibrated for lead shot. Works

perfect for large pellet sizes.

With steel, simply count out the

pellets or weigh and set dipper

accordingly.90973 3.98

Lee Load-All II 79.9812 GAUGE 90011

16 GAUGE 90015

20 GAUGE 90012

LOAD SHOTGUN SHELLS,STEEL OR LEAD SHOT,TO LOOK AND SHOOT

LIKE NEW

EXCLUSIVE DRIVE KEY POSITIVELY ROTATES THE SLUG IN RIFLED BARRELS AND

ELIMINATES THE NEED FOR SUPPORT WADS OR BASE FILLERS;

ASSURES POSITIVE AND SMOOTH DISCARD OF THE SABOT WAD.

GUARANTEED MORE ACCURATE than factory slugs or your money back

Lee Slug MoldLoad slugs for less than standard trap loads. The

Lee DRIVE KEY slug is loaded in standard trap

hull with standard wad and conventional folded

crimp. Slug loads are produced with any standard

shot shell reloading press.

Lee Slug Mold features the exclusive drive key. The drive key positively rotates

the slug in rifled shotgun barrels and doubles as a support rib allowing use of a

standard trap wad—no need for a support wad or base filler. Sabot wad design

outperforms rifled slugs in rifled slug barrels. Velocity and accuracy meet and

exceed expensive factory loaded rifled slugs. Molds feature self centering

automatic core pins for maximum speed and convenience. Mold is complete

with sprue plate, handles and complete instructions with suggested loads.

Shotgun Slug Mold 1 oz. 12 ga. 90281 42.98

Shotgun Slug Mold 7/8 oz. 12 ga. 90282 42.98

18 CAVITY BUCKSHOTBULLETMOLDS

LOAD SLUGSFOR LESS THAN

STANDARDTRAPLOADS

Lee 18 Cavity Buckshot Bullet Molds

Precision-machined molds produce 18 linked pellets per cast.

Each cast produces enough pellets to load two 12 Gauge shotshells.

Easily cast 3,000 pellets per hour. Handles shown not included. Order

product No. 90005 on page 36.

Ball diameter .240 #4 BUCKSHOT 90028 70.00Ball diameter .330 00 buckshot 90486 Ball diameter .360 000 Buckshot 90192

HANDLES 90005 25.98


SLUG +and+ BUCKSHOT MOLDS ⁄ LOAD-ALL II

Our production facilities in Hartford, Wisconsin

THANK YOU FOR CHOOSING LEE PRECISION PRODUCTS

OUR PRODUCTION FACILITIES IN HARTFORD, WISCONSIN


LEE PRECISION, INC.

FROM THE CORNER of a one-car garage to nearly two acres under roof — for more

than 60 years, the LEE family still continues to provide the best value in American made

reloading equipment. Our family looks forward to another lifetime of supplying the best,

most economical reloading equipment in the business.

• JOHN LEE | PRESIDENT •

Thank you for choosing LEE PRECISIONPRODUCTS

OUR PRODUCTION FACILITIES IN HARTFORD, WISCONSIN

40

Lee Reloading Products are guaranteed not to wear out or break

from normal use for two full years or they will be repaired or

replaced at no charge, if returned to the factory. Any lee product

of current man ufacture, regard less of age or con di tion, will be

reconditioned to new, in clud ing new guarantee, if returned to the

factory with payment equal to half the current retail price )


LEE PRECISION, INC. 4275 HIGHWAY U HARTFORD WISCONSIN 53027 262 673 3075

PRINTED IN THE USA | 111320

AUTO BENCH PRIME | AUTO BREECH LOCK PRO | AUTO-DRUM | BREECH LOCK | CLASSIC CASTLOAD-MASTER | LEVER PRIME SYSTEM | LEE LOADER | LOAD-ALL II | RGB FACTORY CRIMP | PACESETTER | PERFECT POWDER MEASURE | SAFETY SCALE | AUTO-PRIME BULGE BUSTER | MICRO-BAND DRIVE KEY | R·E·A·L | ARE TRADEMARKS OF LEE PRECISION, INC.

The LeThe Leee GuaranteeGuaranteeThe Lee Guarantee

LEE PRECISION INC. - HIGGINSON POWDERShigginsonpowders.com/images/2021_Lee_Catalogue.pdfLEE LOADER...

Documents

Transcript of LEE PRECISION INC. - HIGGINSON POWDERShigginsonpowders.com/images/2021_Lee_Catalogue.pdfLEE LOADER...