LED Tubes and Smart Fixtures
Click here to load reader
-
Upload
ip-utilinet -
Category
Technology
-
view
397 -
download
2
description
Transcript of LED Tubes and Smart Fixtures
LED Tubes & Smart Fixtures
USE EXISTING FIXTURES
Rewiring an existing fixture is the
most cost effective way to
achieve instant energy savings. A
simple look overhead will tell
you the story – different colors,
blinking lamps, multiple flicks of
the switch to get all the lights to
turn on – and it is just going to
get worse as manufacturers stop
making some fluorescent lamps
and ballasts.
LIGHTING THAT PAYS YOU
See that 4800 T12 lamp example
in the lower right corner? The
investment is recovered in 1.35
years and results in an estimated
Net Savings over lifetime of
more than $2.7 Million Dollars.
OPTIONAL WIRELESS
CONTROLS
Advanced non battery powered
Wireless Controllers for AC
and/or DC systems. No more
holes in walls for switches. Now,
you can paint or wallpaper then
place your switch and remote
dimmer or choose a location that
suits your unique taste.
INTELLIGENT MONITORING
Available packaged and custom
software for sub metering and
billing monitoring and
management.
Reduce the consumption of energy up to 78%
without sacrificing the quality of service.
LED, the time is now
IP UtiliNET provides LED conversion solutions for existing AC based T8 and T12 fluorescent lamps and ballasts.
The Cardinal product line has earned 4 of the top 10 spots on the July 10, 2012 Design Lights Consortium (DLC)
and stands alone in the tube lights family.
LED Replacement Lamps
Cardinal™ Linear Lights are high quality replacements of standard fluorescent tubes (T8 and T12) and provide
electrical savings of 35% to 50%. Installation is easy, these linear lights use the same terminal connections as
fluorescent tubes, and a universal power supply inside the light eliminates the need for a ballast. Super High
Output surface mount device LEDs are employed to provide 50,000+ hours of lifetime at high-efficacy of
>100lms/watt. Exceptional thermal management is achieved with an aluminum core LED PCB thermally bonded
to the ribbed aluminum heat sink with a ‘D’ channel extrusion. The outer shell is a robust design with a
shatterproof polycarbonate lens available in clear, ribbed or frosted. Solid brass, nickel-plated terminal pins are
installed in tough polycarbonate end-caps that are fastened with screws to the aluminum core.
Gain payback often in as little as 1.35 years with exponential lifetime payback as illustrated in the example above. Simply more Sustainable
KICK YOUR FLUORESCENT PAIN & COST TO THE CURB
LED LAMP SPECIFICATIONS
Length 4 foot
Wattage 18 or 22 Watt
Total Lumens 1800 or 2200 Lumens
Efficacy 100 Lumens / Watt
Voltage 110~277 VAC, (50/60
Hz)
Power Factor >.09
LED Elements Epistar 3528 SE SHO
288 LEDs
Color Temp. 4100 K (STD White)
5000 K (NAT White)
6000 K (Cool White)
Connection Std Bi-Pin (T8 or T12)
Operating Temp -40F to 140F
Lifetime 50,000 hours (LM-80)
Compliance UL1993, 1598, 1598(B),
8750, FCC, CE, RoHS
Warranty 5 Years
6825 Shiloh Road East,
STE B-7
Alpharetta, GA 30005
P (877) 901-6947
www.iputilinet.com [email protected]
Available in; 2,3,4,5,6 and 8 foot
lengths with dual or single pin ends
Based on 4800 T12 Lamps in 1 facility
Payback time (approx.) in years 1.35
Internal Rate of Return 67%
Net savings over lifetime $2,730,671