Waterproof LED Flex Strip (C Series) Completely transparent Epoxy Resin material

Waterproof Rate IP67

Waterproof for suitable outdoor using

3M self-adhesive or matched mounting clip for easy installation

Long life: Up to 50,000 hours with proper thermal management

Performance lighting effect

3528/5060 SMD LED Light Source, available for all color

5meter per reel

Drive by 12V DC

120 degree Beam Angle

Certificate: CE & ROHS

Drawing ------------------------------------------------------CF8W-30------------------------------------------------------------------

------------------------------------------------------- CF3W-15---------------------------------------------------------------- -------------------------------------------------------CF3W-30----------------------------------------------------------------

Notes:

1. All dimension units are millimeters.

2. All dimension tolerance is ±1mm unless otherwise noted.

D15D14

R13

D13D3R2

R3D2

R1

D1 R15R14

Characteristics Absolute Maximum Rating at TA=25℃

Absolute Maximum Rating Parameter Symbo

CF8W-30 CF3W-15 CF3W-30 CF3W-RGB-15 CF3W-RGB-30 Unit

Forward Current IF 2000 3000 6000 3000 6000 mA

Forward Voltage VF DC 12V V

Electrostatic discharge ESD 400 V

Operating Temperature Topr -25 +60∽ ℃

Storage Temperature Tstg -40 +80∽ ℃ Electrical / Optical Characteristics at TA=25℃

Part No. Color Wavelength Lumen(lm) Power Viewing Angle CRI Certifications

HK-CF8W-WW-30 ◆ 3000k-4000k 1020 24 120° 75 CE/ROHS

HK-CF8W-W-30 ◆ 620-630nm 1150 24 120° 78 CE/ROHS

HK-CF8W-R-30 ◆ 515-530nm 1000 24 120° -- CE/ROHS

HK-CF8W-G-30 ◆ 455-470nm 1020 24 120° -- CE/ROHS

HK-CF8W-B-30 ◆ 620-630nm 560 24 120° -- CE/ROHS

HK-CF3W-WW-15 ◆ 3000k-4000k 1650 36 120° 75 CE/ROHS

HK-CF3W -W-15 ◆ 5000k-6000k 1850 36 120° 78 CE/ROHS

HK-CF3W -R-15 ◆ 620-630nm 1280 36 120° -- CE/ROHS

HK-CF3W -G-15 ◆ 515-530nm 1560 36 120° -- CE/ROHS

HK-CF3W -B-15 ◆ 455-470nm 765 36 120° -- CE/ROHS

HK-CF3W-WW-30 ◆ 3000k-4000k 2700 72 120° 75 CE/ROHS

HK-CF3W -W-30 ◆ 5000k-6000k 3600 72 120° 78 CE/ROHS

HK-CF3W -R-30 ◆ 620-630nm 2460 72 120° -- CE/ROHS

HK-CF3W -G-30 ◆ 515-530nm 2960 72 120° -- CE/ROHS

HK-CF3W -B-30 ◆ 455-470nm 1430 72 120° -- CE/ROHS

◆ 620-630nm 525 12 120° -- CE/ROHS

◆ 515-530nm 600 12 120° -- CE/ROHS HK-CF3W-RGB-15

◆ 455-470nm 280 12 120° -- CE/ROHS

◆ 620-630nm 1050 24 120° -- CE/ROHS

◆ 515-530nm 1200 24 120° -- CE/ROHS HK-CF3W-RGB-30

◆ 455-470nm 660 24 120° -- CE/ROHS Notes: 1. Tolerance of measurement of luminous intensity±15%.

2. All the technical parameters are based on per roll.

Typical Applications ● Edge-lighting of transparent or diffused materials. ● Path & Contour Marking. ● Emergency / rescue signs. ● To couple light into transparent or diffused glass . ● Widespread use in accessorial lights for indoors, medical, landscape, ● Architectural lighting, villa, restaurant, hotel, meeting room, show room, shop, counter and so on. ● General lighting, Task lighting, Household appliances, Architectural lighting, Decorative / pathway lighting, Street lighting Safety Information

■ The SMD light ribbon itself and all its components may not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board.

■ Installation of LED light ribbon (with power supplies) needs to be comply with all applicable electrical

and safety standards. Only professionals should be allowed to perform installations. Correct electrical

polarity needs to be observed. Wrong polarity may destroy the ribbon.

■ Parallel connection is highly recommended as safe electrical operation mode. ■ Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the ribbon. ■ Please ensure that the power supply is of adequate power to operate the total load.

■ When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical insulated points between ribbon and mounting surface. ■ Please pay attention to standard ESD precautions when installing the ribbon. ■ Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements. Package

5meter per roll

HK Light Ltd. Factory : Add: 4-5 /F Bldg 11, Sanlian Industrial Area, Shiyan Town, Bao An District, Shen- zhen,

Guangdong, China Postcode: 518101 Global Sales : Tel: +86-755-29833930, +86-755-29649617 Fax: +86-755-29649624 E-mail: sales@hk-light.com MSN: hawker66@gmail.com Skype: hawker668 OEM & ODM : E-mail: oem@hk-light.com Where to Buy : E-mail: info@hk-light.com