LED STREET LIGHT - unitedlightingcorp.com€¦ · Light Output Min of 50,000 hours at L70 (70%...
Transcript of LED STREET LIGHT - unitedlightingcorp.com€¦ · Light Output Min of 50,000 hours at L70 (70%...
LED STREET LIGHT
Innovative & Intelligent Efforts
J-SERIES DRAGON HEAD (R) JDR
The Extra-Built LED Streetlight is optimized a basic LED solution for local and international application roadways. The design incorporates options for the heat sink directly into the unit or for heat transfer to prolong LED life. This solution lowers energy consumption compared to conventional HPSV or HID fixture for additional for operating cost savings and reflex fast return on investment. Designed to meet recommended luminance and illuminance requirement for local and all street lighting specifications.
Enquiry: Email: [email protected] (03-5525 2907)
PLM II 4500lm CCT 4000K
Lighting Specification
Wattage (W) Luminous Flux
>100~134lm/W CCT Beam Angle CRI
Junction Temperature
90 >9000lm
3000K, 4000K 125° x 50 ° Ra ≥ 70 <90°C
120 >12000lm
150 >15000lm
180 >18000lm
220 >22000lm
250 >25000lm
270 >27000lm
Other Specification
Housing & Casing Aluminium Die-casting with Aluminium 6063 T5 Extruded
Lens Optical Grade Poly methy methacrylate (PMMA), IP Rating
Ingress Protection IP66
Light Output Min of 50,000 hours at L70 (70% lumen maintenance)
Input Power Rating 220V-240V @ 50-60Hz
Power Factor >0.95
Operating Temperature -40° Celsius to +50° Celsius
Certification and Testing
Luminaire Certification
SIRIM QAS INTERNATIONAL, J-MAL JKR, DEKRA,TUV, VDE IECEE / CB SCHEME- Inclusive of National differences for Saudi Arabia (SASO), European group differences and National differences.
Luminaire Test Report
IEC/EN 60598-2-3:2002, IEC/EN 60598-1 : 2008, MS IEC 60598-1:2012, MS IEC 60598-2-3:2006, IES LM79-08, IEC62722-1:2014, IEC62722-2-1:2014, IEC/EN62471:2006, IEC62493:2009
Components Certification
IEC 61347-2-13:2006 : Driver (DEKRA) IEC 61347-1:2007+A1:2010+A2:2012 IEC 62031/A1:2012 : LED Module (DEKRA) IEC 62717:2014 : LED Module Performance IEC 62717:2014/AMD1:2015 IEC 50525 : Multi Connector cable (VDE) IEC 61984:2008 : Connector (VDE) LM 80-08 : LED (DEKRA) IEC 61643 : SPD
Ordering Code
EXTRA-BUILT JDR-8XX-XXX
Dimension
Spigot Diameter: Min 38mm, Max 60mm
Wattage ± 10%
Width Length Height Weight
90W
366mm
669mm
214mm
9.8Kg
120W 735mm 11.5Kg
150W 742mm 12.0Kg
180W 816mm 13.5Kg
220W 889mm 15.8Kg
250W 963mm 16.5Kg
270W 1036mm 17.8Kg
CCT Wattage
J-Series Dragon Head (R)
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
Accessories
SPD DRIVER
EXTRA-BUILT DESIGN POWERED BY PHILIPS
LED MODULE
Optional
NEMA RECEPTACLE SOCKET WITH COVER
LED STREET LIGHT
Innovative & Intelligent Efforts
J-SERIES DRAGON HEAD (R) JDR-I
The Extra-Built LED Streetlight is optimized a basic LED solution for local and international application roadways. The design incorporates options for the heat sink directly into the unit or for heat transfer to prolong LED life. This solution lowers energy consumption compared to conventional HPSV or HID fixture for additional for operating cost savings and reflex fast return on investment. Designed to meet recommended luminance and illuminance requirement for local and all street lighting specifications.
Enquiry: Email: [email protected] (03-5525 2907)
Optional
Certification and Testing
Luminaire Certification
SIRIM QAS INTERNATIONAL, JKR, DEKRA,TUV, VDE IECEE / CB SCHEME- Inclusive of National differences for Saudi Arabia (SASO), European group differences and National differences.
Luminaire Test Report
IEC/EN 60598-2-3:2002, IEC/EN 60598-1 : 2008, MS IEC 60598-1:2012, MS IEC 60598-2-3:2006, IES LM79-08, IEC62722-1:2014, IEC62722-2-1:2014, IEC/EN62471:2006, IEC62493:2009
Components Certification
IEC 61347-2-13:2006 : Driver (DEKRA) IEC 61347-1:2007+A1:2010+A2:2012 IEC 62031/A1:2012 : LED Module (DEKRA) IEC 62717:2014 : LED Module Performance IEC 62717:2014/AMD1:2015 IEC 50525 : Multi Connector cable (VDE) IEC 61984:2008 : Connector (VDE) LM 80-08 : LED (DEKRA) IEC 61643 : SPD
Ordering Code
EXTRA-BUILT JDR-I -8XX-XXX
Lighting Specification
Wattage (W) ±10 Luminous Flux
>100~134lm/W CCT Beam Angle CRI
Junction Temperature
150W >15000lm
3000K, 4000K 125° x 50 ° Ra ≥ 70 <90°C 180W >18000lm
220W >22000lm
Other Specification
Housing & Casing Aluminium Die-casting with epoxy powder coating
Lens Optical Grade Poly Methy methacrylate (PMMA), IP Rating
Ingress Protection IP66
Light Output Min of 50,000 hours at L70 (70% lumen maintenance)
Input Power Rating 220V-240V @ 50-60Hz
Power Factor >0.95
Operating Temperature -40° Celsius to +50° Celsius
Dimension
Spigot Diameter: Min 38mm, Max 60mm
Wattage ± 10%
Width Length Height Weig
ht
150
358mm 933mm 213mm
15Kg
180 16Kg
220 17Kg
CCT Wattage
J-Series Dragon Head (R) JDR-I
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
Accessories
DRIVER
EXTRA-BUILT DESIGN POWERED BY PHILIPS
LED MODULE SPD
NEMA RECEPTACLE SOCKET WITH COVER
LED STREET LIGHT
Innovative & Intelligent Efforts
J-SERIES DRAGON HEAD (R) JDR-II
Enquiry: Email: [email protected] (03-5525 2907)
The Extra-Built LED Streetlight is optimized a basic LED solution for local and international application roadways. The design incorporates options for the heat sink directly into the unit or for heat transfer to prolong LED life. This solution lowers energy consumption compared to conventional HPSV or HID fixture for additional for operating cost savings and reflex fast return on investment. Designed to meet recommended luminance and illuminance requirement for local and all street lighting specifications.
Dimension
Wattage ± 10%
Width Length Height Weig
ht
120W
328mm 706mm 210mm 8.0K
g 150W
Certification and Testing
Luminaire Certification
SIRIM QAS INTERNATIONAL, DEKRA,TUV, VDE IECEE / CB SCHEME- Inclusive of National differences for Saudi Arabia (SASO), European group differences and National differences.
Luminaire Test Report
IEC/EN 60598-2-3:2002, IEC/EN 60598-1 : 2008, MS IEC 60598-1:2012, MS IEC 60598-2-3:2006, IES LM79-08, IEC62722-1:2014, IEC62722-2-1:2014, IEC/EN62471:2006, IEC62493:2009
Components Certification
IEC 61347-2-13:2006 : Driver (DEKRA) IEC 61347-1:2007+A1:2010+A2:2012 IEC 62031/A1:2012 : LED Module (DEKRA) IEC 62717:2014 : LED Module Performance IEC 62717:2014/AMD1:2015 IEC 50525 : Multi Connector cable (VDE) IEC 61984:2008 : Connector (VDE) LM 80-08 : LED (DEKRA) IEC 61643 : SPD
Ordering Code
EXTRA-BUILT JDR- II -8XX-XXX
Lighting Specification
Wattage (W)±10 Luminous Flux
>100~134lm/W CCT Beam Angle CRI
Junction Temperature
90W >9000lm
3000K, 4000K 125° x 50° Ra ≥ 70 <90°C 120W >12000lm
150W >15000lm
Other Specification
Housing & Casing Aluminium Die casting with epoxy powder coating
Lens Optical Grade Polycarbonate
Ingress Protection IP66
Light Output Min of 50,000 hours at L70 (70% lumen maintenance)
Input Power Rating 220V-240V @ 50-60Hz
Power Factor >0.95
Operating Temperature
-40 Celsius to +60 Celsius
J-Series Dragon Head (R) JDR-II
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
EXTRA-BUILT DESIGN POWERED BY PHILIPS
CCT Wattage
w
L
H
Spigot Diameter Min 38mm, Max 60mm
Optional Accessories
DRIVER LED MODULE SPD
NEMA RECEPTACLE SOCKET WITH COVER
LED COMPOUND LIGHT
Innovative & Intelligent Efforts
J-SERIES DRAGON NEST (DN) JDN
The Extra-Built LED Streetlight is optimized a basic LED solution for local and international application roadways. The design incorporates options for the heat sink directly into the unit or for heat transfer to prolong LED life. This solution lowers energy consumption compared to conventional HPSV or HID fixture for additional for operating cost savings and reflex fast return on investment. Designed to meet recommended luminance and illuminance requirement for local and all street lighting specifications.
Enquiry: Email: [email protected] (03-5525 2907)
Ordering Code
Ordering Code EXTRA-BUILT JDN-8XX-XXX
Accessories
Lighting Specification
Wattage (W) Luminous Flux
>100~134lm/W CCT Beam Angle CRI
Junction Temperature
30 >3500lm
3000K, 4000K, 5000K
120 ° x 50° Ra≥70 <90°C 60 >7000lm
90 >11000lm
Other Specification
Housing & Casing Aluminium High Pressure Die Casting
Lens Optical Grade Polycarbonate with heat sink
Ingress Protection IP65
Light Output Min of 50,000 hours at L70 (70% lumen maintenance)
Input Power Rating 220V-240V @ 50-60Hz
Power Factor >0.95
Operating Temperature -35° Celsius to +45° Celsius
Dimension
Wattage ± 10%
Diameter Height Weight
30W
483mm 207mm
8.0kg
60W 8.5Kg
90W 8.8Kg
CCT Wattage
J-Series Dragon Nest (DN) JDN
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
DRIVER
EXTRA-BUILT DESIGN POWERED BY PHILIPS
LED MODULE
Certification and Testing
Luminaire Certification SIRIM QAS INTERNATIONAL, DEKRA, TUV, VDE IECEE / CB SCHEME –Inclusive of National differences for Saudi Arabia (SASO), European group differences and National differences.
Luminaire Test Report IEC/EN 60598-2-3:2002, IEC/EN 60598-1:2008, IES LM79-08, IEC/EN 62471 :2006, IEC62493 : 2009
Components Certification IEC 61347-2-13:2006: Driver IEC 61347-1:2007+A1:2010 +A2:2012 IEC 62031/A1:2012 : LED Module IEC 62471:2006 IEC 62717 :2014 : Performance IEC 62717:2014/AMD/2015 IEC 50525 : Multi Connector cable IEC 61984:2008 - Connector LM 80-08 : LED Chip IEC 61643 :SPD
Fixing method : Top or side fitting Ø 60mm, angle can be adjustable.
Dimension
Wattage ± 10%
Diameter Height Weight
30W
483mm 734mm
8.0kg
60W 8.5Kg
90W 8.8Kg
SPD
LED SOLAR LIGHTING
Innovative & Intelligent Efforts
SOLAR J-SERIES JCR
Enquiry: Email: [email protected] (03-5525 2907)
The Extra-Built LED Solar lighting is optimized a basic LED solution for local and international application roadways. The design integrated all solar parts in one box. The heat sink directly into the unit or for heat transfer to prolong LED life. Just need to turn on the switch, then can work automatically. This solution lowers energy consumption and easy to install compared to conventional solar system need more wiring and each components separated. Designed to meet recommended luminance and illuminance requirement for local and all street road lighting specifications.
Lighting Specification
Wattage ( W ) Efficiency CCT Viewing Angle Solar Panel (W)
120 >14400lm 3000K - 6000K 120° 130W.18V
Monocrystalline Silicon Cell
Other Specification
Housing & Casing Aluminium Alloy
Lens Optical Grade Polycarbonate
Ingress Protection IP65
Light Output Min of 50,000 hours at L70 (70% lumen maintenance)
Input Power Rating DC .Build in Lithium Battery 12V 66Ah
Led Brand Bridgelux 120W (USA)
Operating Temperature
-15° Celsius to + 85° Celsius
Install Height 10-12M
Charge Time 6 Hours
Discharge Time Full power: >10 hours Saving Model (20% -30%): 3-5 rainy days
Dimension
Wattage ± 10%
Width A
Length B Height C Weight
120W 540mm 1270mm 150mm 29.8Kg
Solar J-Series JCR
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
Certification and Testing
Luminaire Certification
SCS BORY
Luminaire Test Report
EN 55015 :2013, EN 61547:2009, EN 60529:1991+A2:2013
Components Certification
EMC-Directive 2004/108/EC EN 55022 : 2010 EN 61000-3-2:2006+A1:2009+A2:2009;EN 61000-3-3:2008. EMS – EN-61000-4-2:2009,EN 61000-4-3:2008+A2:2010, EN 61000-4-4:2012,EN 61000-4-5:2006, EN 61000-4-6:2009,EN 61000-4-8:2010,EN 61000-4-11:2004
Ordering Code
EXTRA-BUILT SOLAR JCR-8XX-XXX
CCT Wattage
Polar Diagram Light Curve 120W
Accessories
Led Module
LED SOLAR LIGHTING
Innovative & Intelligent Efforts
SOLAR J-SERIES JSSC
Enquiry: Email: [email protected] (03-5525 2907)
The Extra-Built LED Solar lighting is optimized a basic LED solution for local and international application roadways. The design integrated all solar parts in one box. The heat sink directly into the unit or for heat transfer to prolong LED life. Just need to turn on the switch, then can work automatically. This solution lowers energy consumption and easy to install compared to conventional solar system need more wiring and each components separated. Designed to meet recommended luminance and illuminance requirement for local and all street road lighting specifications.
Lighting Specification
Wattage ( W ) Efficiency CCT Viewing Angle Solar Panel (W)
20 >2300lm 2700K - 6000K 120° 35W.18V
30 >4600lm 3500K - 4000K 120° 50W.18V
60 >7800lm 3500K - 4000K 120° 80W.18V
Other Specification
Housing & Casing Aluminium Extruded & Aluminium Die casting
Lens Optical Grade Polycarbonate
Ingress Protection IP66
Light Output Min of 50,000 hours at L70 (70% lumen maintenance)
Input Power Rating DC .Build in Battery 12V
Led Brand Bridgelux (USA)
Operating Temperature
-15° Celsius to + 55° Celsius
Dimension
Wattage ± 10%
Width Length Height Weight
20W
325mm
995mm
136mm
13Kg
30W 1135mm 16Kg
60W 1135mm 21Kg
Solar J-Series JSSC
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
EXTRA-BUILT DESIGN POWERED BY PHILIPS
Certification and Testing
Luminaire Certification
SCS BORY
Luminaire Test Report
EN 55015 :2013, EN 61547:2009, EN 60529:1991+A2:2013
Components Certification
EMC-Directive 2004/108/EC EN 55022 : 2010 EN 61000-3-2:2006+A1:2009+A2:2009;EN 61000-3-3:2008. EMS – EN-61000-4-2:2009,EN 61000-4-3:2008+A2:2010, EN 61000-4-4:2012,EN 61000-4-5:2006, EN 61000-4-6:2009,EN 61000-4-8:2010,EN 61000-4-11:2004
Ordering Code
EXTRA-BUILT SOLAR JSSC-8XX-XXX
CCT Wattage
Polar Diagram Light Curve 30W
Accessories
Led Module
LED FLOODLIGHT
Innovative & Intelligent Efforts
M-SERIES DRAGON MARS (DM)
The Extra-Built LED Floodlight is optimized a basic LED solution for Sports and Industrial application Highmast. The design incorporates options for the heat sink directly into the unit or for heat transfer to prolong LED life. This solution lowers energy consumption compared to conventional HPSV or HID fixture for additional for operating cost savings and reflex fast return on investment. Designed to meet recommended luminance and illuminance requirement for local and all indoor and outdoor application specifications.
Enquiry: Email: [email protected] (03-5525 2907)
Ordering Code & Installation Guide
Ordering Code EXTRA-BUILT DM - 8XX-XXX
Lighting Specification
Wattage Luminous Flux
100lm/W CCT Beam Angle CRI
40W >4000lm
3000K – 6500K 12° – 60 ° >80
80W >8000lm
120W >12000lm
160W >16000lm
200W >20000lm
240W >24000lm
Dimension
Wattage Width Length Height Weight
120W
415mm
470mm
141mm 11.0 Kg 160W 540mm
200W 610mm
M-Series Dragon Mars (DM)
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
EXTRA-BUILT DESIGN POWERED BY PHILIPS
width
Height
Length
Other Specification
Housing & Casing Aluminium Die-casting with Aluminium 6063 T5 Extruded
Lens Optical Grade Polycarbonate, IP Rating
Ingress Protection IP66
Light Output Min of 50,000 hours at L70 (90% lumen maintenance)
Input Power Rating 220-240Vac @ 50-60Hz
Power Factor >0.95
Operating Temperature -20° Celsius to +50° Celsius
Certification and Testing
Luminaire Certification SIRIM QAS INTERNATIONAL, DEKRA, TUV, VDE IECEE / CB SCHEME –Inclusive of National differences for Saudi Arabia (SASO), European group differences and National differences.
Luminaire Test Report IEC/EN 60598-2-5:1998, IEC/EN 60598-1:2008, IES LM79-08, IEC/EN 62471:2006, IEC62493:2009
Components Certification IEC 61347-2-13:2006: Driver IEC 61347-1:2007+A1:2010 +A2:2012 IEC 62031/A1:2012 : LED Module IEC 62471:2006 IEC 62717 :2014 : Performance IEC 62717:2014/AMD/2015 IEC 50525 : Multi Connector cable IEC 61984:2008 - Connector LM 80-08 : LED Chip IEC 61643 :SPD
CCT Wattage
Dimension
Wattage Width Length Height Weight
40W
315mm
280mm
170mm
8.0Kg
80W 310mm 8.5Kg
120W 360mm 9.4Kg
160W 430mm 11.5Kg
200W 485mm 13.4Kg
240W 565mm 14.3Kg
320W 430mm 660mm 340mm 23.0Kg
LED HIGHBAY LIGHT
Innovative & Intelligent Efforts
N-SERIES DRAGON NEPTUNE (DN)
The Extra-Built LED Highbay is optimized a basic LED solution for Sports and Industrial application highbay. The design incorporates options for the heat sink directly into the unit or for heat transfer to prolong LED life. This solution lowers energy consumption compared to conventional HPSV or HID fixture for additional for operating cost savings and reflex fast return on investment. Designed to meet recommended luminance and illuminance requirement for local and all indoor and outdoor application specifications.
Enquiry: Email: [email protected] (03-5525 2907)
Lighting Distribution 1 unit M8B LED Module Beam Angle (50%) 110Deg
Lighting Specification
Wattage Luminous Flux
100lm/W CCT Beam Angle CRI
80W >8000lm
3000K – 5700K 110deg >80 120W >12000lm
160W >16000lm
Other Specification
Housing & Casing Aluminium 6063 T5 Extruded & Die casting
Lens Optical Grade Polycarbonate
Ingress Protection IP66
Light Output Min of 50,000 hours at L70 (90% lumen maintenance)
Input Power Rating 220V @ 50-60Hz
Power Factor >0.95
Operating Temperature -20 Celsius to +50 Celsius
Certification and Testing
Luminaire Certification IECEE/CB SIRIM
Luminaire Test Report IEC60598, IES LM79-08, IEC62722, IEC62471, IEC62493
Components Certification EMC-IEC61347 : Driver IEC 62031 : LED Module IEC 62717 : LED Module Performance IEC 505225 : Splitter LM80-08 : LED IEC 61643 : SPD
Dimension
Wattage Width Length Height Weight
60W
315mm
315mm
170mm
6Kg
120W 360mm 7Kg
160W 430mm 11Kg
Ordering Code & Installation Guide
Ordering Code EXTRA-BUILT DN-8XX-XXX
Installation Guide 1.Place anchor bolt into ceiling. 2. Attached wire rod or wire cable
suspender 3. Feed the AC wire to terminal block
in respectively
CCT Wattage
N-Series Dragon Neptune (DM)
EXTRA-BUILT DESIGN POWERED BY PHILIPS
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
LED HIGHBAY LIGHT
Innovative & Intelligent Efforts
N-SERIES DRAGON NEPTUNE TUBE (DNT)
The Extra-Built LED Highbay tube is optimized a basic LED solution for Sports and Industrial application highbay. The design incorporates options for the heat sink directly into the unit or for heat transfer to prolong LED life. This solution lowers energy consumption compared to conventional HPSV or HID fixture for additional for operating cost savings and reflex fast return on investment. Designed to meet recommended luminance and illuminance requirement for local and all indoor and outdoor application specifications.
Enquiry: Email: [email protected] (03-5525 2907)
Lighting Distribution 1 unit LED Tube 18W CCT 6500K
Lighting Specification
Wattage Luminous Flux
100lm/W CCT Beam Angle CRI
36W >5000lm
3000K – 6500K 120deg >80 54W >7500lm
72W >10000lm
Other Specification
Housing & Casing Aluminium 6063 T5 Extruded & Die casting
Lens Tube LED – Philips Master LED
Ingress Protection IP66
Light Output Min of 50,000 hours at L70 (90% lumen maintenance)
Input Power Rating 220V @ 50-60Hz
Power Factor >0.95
Operating Temperature -20 Celsius to +50 Celsius
Certification and Testing
Luminaire Certification IECEE/CB Scheme Certification, Sirim QAS International Certification
Luminaire Test Report IEC60598, IES LM79-08, IEC62722, IEC62471, IEC62493
Components Certification EMC-IEC61347 : Driver IEC 62031 : LED Module IEC 62717 : LED Module Performance LM80-08 : LED
Dimension
Wattage Width Length Height Weight
36W
315mm
315mm
170mm
6Kg
54W 360mm 7Kg
72W 430mm 11Kg
Ordering Code & Installation Guide
Ordering Code EXTRA-BUILT DNT-8XX-XXX
Installation Guide 1.Place anchor bolt into ceiling. 2. Attached wire rod or wire cable
suspender 3. Feed the AC wire to terminal block
in respectively
CCT Wattage
N-Series Dragon Neptune TUBE (DNT)
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
EXTRA-BUILT DESIGN POWERED BY PHILIPS
LED HIGHBAY LIGHT
Innovative & Intelligent Efforts
N-SERIES FORTIMO HIGHBAY Powered by
The Extra-Built LED Fortimo Highbay is an integrated solution with IP65 protection, excellent optical and heat management that offers high energy efficacy and high quality of light. The Highbay solution is designed to enable LED lighting in industry (high-bay) applications – warehouses, factories, large-format retail stores. A range of compatible IP67 Xitanium drivers complement the temperature conditions. This highbay portfolio is suitable to raplace similar solutions using conventional 100W, 150W, 250W an 400W
Enquiry: Email: [email protected] (03-5525 2907)
Lighting Distribution Fortimo Highbay 10,000lm, 71 W
Lighting Specification
Wattage Luminous Flux
>140lm/W CCT Beam Angle CRI
71W 10000lm
4000K / 5700K 60deg / 90deg >80
100W 15000lm
136W 20000lm
165W 24000lm
Other Specification
Housing & Casing Integrated heat sink
Lens IP65 Optics
Colour Consistency 6 SDCM
Insulation Class Class 1
Ingress Protection IP65
Light Output More of 50,000 hours at B50L70, Ta 35C
Operating Temperature -30 Celsius to +50 Celsius
Dimmer 1-10V Dimmable
Current Typical 1050mA
Dimension
Wattage Diameter Height
71W 250mm 100mm
100W 310mm 115mm
136W 360mm 115mm
165W 360mm 115mm
N-Series Fortimo Highbay
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
Accessories
Reflector 60⁰ and 90⁰
Driver 100W, 150W, 220W IP67 1-10V Driver
EXTRA-BUILT DESIGN POWERED BY PHILIPS
Certificates
Approbation CB, CQC, KC
Others EMC & ROSH (Environmental)
LED RECESSED LIGHT
Innovative & Intelligent Efforts
S-SERIES SATURN RECESSED
The Extra-Built LED Recessed is optimized a basic LED solution for local and international indoor application. It’s unique, flexible and interchangeable for modular flex strip of any brand or reflective optics are designed for optimization application efficiency and minimize glare. . Designed to meet recommended luminance and illuminance requirement for local and all indoor application specifications. This solution lowers energy consumption compared to traditional fixture for additional operating cost savings and reflex fast return on investment.
Enquiry: Email: [email protected] (03-5525 2907)
Polar Diagram Comparison
Lighting Specification
Wattage Luminous Flux
85lm/W CCT Beam Angle CRI
2’X2’ 20W >2100lm
3000K 110deg >83
2’X4’ 40W >4200lm
Other Specification
Housing & Casing Aluminium Extrusion
Lens Philips Master LED Tube
Ingress Protection IP20
Light Output Min of 50,000 hours at L70 (90% lumen maintenance)
Input Power Rating 220V @ 50-60Hz
Power Factor >0.95
Operating Temperature -25 Celsius to +40 Celsius
Certification
Approbation and Certification
TUV CE KEMA ROHS REACH
Dimension
Wattage Width Length Height Weight
18W
609mm
‘2X2’ 609mm
11mm
3Kg
32W ‘2X4’
1209mm 4Kg
Ordering Code & Installation Guide
Ordering Code EXTRA-BUILT SR-8XX-XXX
Installation Guide 1. Remove the false ceiling 2. Replace with LED Fitting 3. Feed the mains AC wire to
terminal block in respectively
CCT Wattage
SR-Series Saturn Recessed
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
EXTRA-BUILT DESIGN POWERED BY PHILIPS
LED RECESSED TUBE LIGHT
Innovative & Intelligent Efforts
S-SERIES RECESSED TUBE
The Extra-Built LED Recessed Tube is optimized a basic LED solution for local and international indoor application. With a reliable value-for money Philips Essential LED Tube, incorporated with frontier LED chips and other advanced technologies. The product helps customer to achieve 60% energy saving and significant maintenance cost reduction by comparing to fluorescent lamps. Designed to meet recommended luminance and illuminance requirement for local and all indoor application specifications. This solution lowers energy consumption compared to traditional fixture for additional operating cost savings and reflex fast return on investment.
Enquiry: Email: [email protected] (03-5525 2907)
Dimension
Wattage Width Length (L1) Height
20W 600mm 600mm 90mm
40W 600mm 1220mm 90mm
Other Specification
Housing & Casing Heavy gauge sheet steel Anodised aluminium with cross blades louvers
Lens Philips Essential LEDtube
Ingress Protection IP20
Light Output Min of 30,000 hours lumens maintenance
Input Power Rating 220V @ 50-60Hz
Power Factor >0.95
Operating Temperature -25 Celsius to +40 Celsius
Ordering Code & Installation Guide
Ordering Code EXTRA-BUILT SRT-8XX-XXX
Installation Guide 1. Mains Off 2. Remove the false ceiling 3. Replace with LED Fitting 4. Feed the mains AC wire to
terminal block in respectively
CCT Wattage
S-Series Recessed Tube (SRT)
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
EXTRA-BUILT DESIGN POWERED BY PHILIPS
Certification & Test Report
Approbation and Certification
TUV SURUHANJAYA TENAGA CE KEMA ROHS REACH
Lighting Specification
Wattage
Master Lumen Output
Essential Lumen Output
Input Power Rating
Cap CCT Beam Angle
CRI Led Brand
2ft x 2ft (2x8W)
1600lm 1600lm
220-240V AC, 50-60Hz.
Pf >0.90
G13 4000K / 6500K
240° 80 PHILIPS
Lumileds
2ft x 2ft (3x8W)
2400lm 2400lm
2ft x 2ft (4x 16W)
3200lm 3200lm
4ft x 2 (16W)
LED BATTEN TUBE LIGHT
Innovative & Intelligent Efforts
S-SERIES BATTEN TUBE Powered by
The Extra-Built LED Batten Tube is optimized a basic LED solution for local and international indoor application. With a reliable value-for money Philips Essential LED Tube, incorporated with frontier LED chips and other advanced technologies. The product helps customer to achieve 60% energy saving and significant maintenance cost reduction by comparing to fluorescent lamps. Designed to meet recommended luminance and illuminance requirement for local and all indoor application specifications. This solution lowers energy consumption compared to traditional fixture for additional operating cost savings and reflex fast return on investment.
Enquiry: Email: [email protected] (03-5525 2907)
Dimension
Wattage Width Length Height
1 x8W 54mm 609mm 42mm
2 x8W 100mm 609mm 42mm
1x16W 54mm 1220mm 42mm
2 x16W 100mm 1220mm 42mm
Lighting Specification
Batten / Wattage
Lumen Output
Input Power Rating
Cap CCT Beam Angle CRI Led Brand
2ft x 1 (8W) 800lm
220-240V AC, 50-60Hz. Pf >0.90
G13 4000K / 6500K
240° >80 PHILIPS
Lumileds
2ft x 2 (8W) 1600lm
4ft x 1 (16W) 1600lm
4ft x 2 (16W) 3200lm
Other Specification
Housing Material 0.7mm Cold Rolled Steel sheet
Housing Finishing Epoxy powder coating
Ingress Protection IP20
Light Output 36,300 hours, 70% lumen maintenance at Ta=25°C
Mounting Surface / Pendant
Operating Temperature -30° Celsius to +45° Celsius
Certification and Testing
Luminaire Certification SIRIM QAS INTERNATIONAL, DEKRA, LEXTAR, NVLAP. IECEE/ CB SCHEME – European group differences and National differences
Luminaire Test Report MS IEC 60598-2-1:1997, MS IEC 60598-1:2012,
Components Certification IEC60598-2-1:1979+A1:1987, IEC 60598-1:2008, IEC 62471:2006, IEC 62471:2008, EN 60598-2-1:1989, EN 60598-1:2008+A11:2009, IES TM-21-11, LM-80-08, EN 61347-2-13:2006, EN 61347-1-2008+1A:2011+A2:2013, EN 62031:2008+1A:2013, EN 61195:1999, IEC/TR 62471-2:2009, EN 60155:1995+A2:2007, EN 60061-1:1993, EN 62493:2010, EN 55015:2006+A1:2007+A2:2009( CISPR 15:2005+A1:2006+A2:2008), EN 61000-3-2:2006+A2:2009 (IEC 61000-3-2:2005+A2:2009), EN 61000-3-3:2008 (IEC 61000-3-3:2008), EN 61547:2009 (IEC 61547:2009),( IEC 61000-4-2:2008,IEC 61000-4-3:2006+A1:2007, IEC 61000-4-4:2004, IEC 61000-4-5:2005, IEC 61000-4-6:2008, IEC 61000-4-8:1993+A1:2000, IEC 61000-4-11:2004), MS 2112-3:2009
Ordering Code & Installation Guide
Ordering Code EXTRA-BUILT SBT-8XX-XXX
Installation Guide 1. Mains Off 2. Remove all existing
Fluorescent Tubes and luminaires
3. Install new LED Bare Channel Fitting
4. Install the LED Tube
CCT Wattage
S-Series Batten Tube (SBT)
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
EXTRA-BUILT DESIGN POWERED BY PHILIPS
LED TUBE LIGHT
Innovative & Intelligent Efforts
PHILIPS LED TUBE
PHILIPS LED TUBE is a reliable value-for-money LED lamp out of Philips lighting portfolio, incorporates frontier LED chips and other advanced technologies. The product help customers achieve more than 50% energy saving and significant maintenance cost reduction by comparing to fluorescent lamps. It also helps generates natural and comfortable lighting effect, and to build up green and environment friendly image for our customers.
Enquiry: Email: [email protected] (03-5525 2907)
Accessories
Starter
Lighting Specification
Wattage Luminous Flux CCT Beam Angle CRI
MASTER 18W >2500lm
3000K/4000/6500 160deg
>80
MASTER 16W >2100lm
MASTER 9W >1050lm
ESSENTIAL 20W >2100lm
4000/6500 240deg
ESSENTIAL 16W >1600lm
ESSENTIAL 8W >800lm
ECOFIT 16W >1600m
>70
ECOFIT 8W >800lm
Other Specification
Ingress Protection IP20
Light Output Master : 50,000 hrs Essential : 30,000 hrs Ecofit : 15,000 hrs
Input Power Rating 220V @ 50-60Hz
Power Factor >0.95
Operating Temperature -25 Celsius to +40 Celsius
Certification & Test Report
Approbation and Certification
TUV SURUHANJAYA TENAGA CE KEMA ROHS REACH
Dimension
Wattage Width Length
MASTER 18W
28mm
1198mm MASTER 16W
MASTER 9W 27.8mm 588.6mm
MASTER 12W
28mm
1198mm
ESSENTIAL 20W 1198mm
ESSENTIAL 16W
588.6mm
ESSENTIAL 8W
ECOFIT 16W
ECOFIT 8W
Philips LED Tube
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
EXTRA-BUILT DESIGN POWERED BY PHILIPS
Philips EMP Starter
LED DOWNLIGHT
Innovative & Intelligent Efforts
P-SERIES DL-S MODULE
The Extra-Built LED DL-S Module Downlight is suitable for a wide range of indoor application (Hotel lobbies, schools, meeting rooms etc.) The easy design dimension fits standard ceiling holes is optimized a basic LED solution for Indoor Lighting. The design incorporates options for the heat sink directly into the unit or for heat transfer to prolong LED life. From lumen point of view, compared to a conventional downlight the DL-S Module may be suitable to replace a 10W up to 2x18W light source. Designed to meet recommended luminance and illuminance requirement for local and all indoor and outdoor application specifications.
Enquiry: Email: [email protected] (03-5525 2907)
Polar Diagram Comparison 2000lm 840 25w
Lighting Specification
Wattage Luminous Flux
100lm/W CCT Beam Angle CRI
7W 550lm
3000K – 5000K
100deg
>80
12W 900lm
15W 1200lm
102deg 19W 1500lm
25W 2000lm
Dimension
Wattage Diameter Height
7W 4”
83mm
12W 4”
15W 6”
19W 6”
25W 6”
Ordering Code & Installation Guide
Ordering Code EXTRA-BUILT PDLS-8XX-XXX
Installation Guide 1. Create a hole with a diameter of 174mm
2. Insert the power line to amphenol connector N and L pole through the tension disc
3. Fold the spring buckle and put in ceiling hole
4. Put the lamp into ceiling hole, spring buckle will be open and fix the light firmly.
CCT Wattage
P-Series DL-S Module
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
Other Specification
Housing & Casing Integrated driver + heatsink shell
Lens Clear Optic
Colour Consistency 5 SDCM
Insulation Class Class 1
Ingress Protection IP20
Light Output Min of 25,000 hours at L70 (90% lumen maintenance)
Operating Temperature -20 Celsius to +50 Celsius
Current Typical 69mA
Power Factor >0.90
Certificates
Safety
IEC 62031: LED Module & Safety IEC 62471: Photobiological EN/IEC 61347-2-13: LED Control Gear EN/IEC 62384: Performance
Others EMC & ROSH (Environmental)
EXTRA-BUILT DESIGN POWERED BY PHILIPS
LED PENDANT DOWNLIGHT
Innovative & Intelligent Efforts
P-SERIES ARCHITECTURAL LIGHTING
The Extra-Built LED Architectural Lighting is suitable for a wide range of indoor application (Hotel obbies, schools, meeting rooms etc.) The simple design is optimized a basic LED solution for Downlights, Pendant Lights and Wall Lights. The hollow shape is full of creativity vitality into ordinary lamp body and shows faultless performance, provides a strong sense of space. The curved light direction emphasizes target object in a smooth and dramatic atmosphere, revealing and unexpected art inspiration design which brings a comfortable visual experience.
Enquiry: Email: [email protected] (03-5525 7207)
Polar Diagram Comparison
Lighting Specification
Wattage Luminous Flux
74lm/W CCT Beam Angle CRI
25W
550lm 3000K
120 deg >80
900lm 4000K
1200lm 5000K
2000lm 5700K
Dimension
Wattage Diameter Weight
25W 12” 800g
Ordering Code & Installation Guide
Ordering Code EXTRA-BUILT PPL-8XX-XXX
Installation Guide 1.Knock the plastic anchor into ceiling. 2.Attach transparent DC wire to
suspending rope. 3.Twist rope head into locking device 4.Insert the transparent cable through
cable entry. 5.Feed the mains AC wire to terminal
block in respectively. 6.Fix surface mount box onto bracket.
CCT Wattage
P-Series Pendant Architectural Lighting
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
Other Specification
Housing & Casing Integrated driver + heatsink shell
Lens Clear Optic
Dimmable Triac Dimmers
Insulation Class Class 1
Ingress Protection IP40
Light Output Min of 40,000 hours at L70 (90% lumen maintenance)
Operating Temperature -20 Celsius to +50 Celsius
Current Typical 300mA
Power Factor >0.90
Certificates
Test Report IEC 62031: LED Module & Safety IEC 62471: Photobiological EN/IEC 62384: Performance
Others EMC & ROSH (Environmental)
EXTRA-BUILT DESIGN POWERED BY PHILIPS
LED LANDSCAPE LIGHTING
Innovative & Intelligent Efforts
L-SERIES BOLLARD
Enquiry: Email: [email protected] (03-5525 2907)
The Extra-Built LED Landscape lighting is optimized a basic LED solution ideal for illuminating building entryways, walking paths and pedestrian plazas, as well as any other location requiring a low mounting height light source. The design construction in one piece of extruded aluminum for extreme durability and PMMA diffuser reflector window. The light engines consist of high-efficacy LEDs mounted to heat sink directly into the unit or for heat transfer to prolong LED life. This solution lowers energy consumption compared to conventional type.
Lighting Specification
Wattage Luminous Flux CCT Beam Angle CRI
20W 2100lm
3000K, 4000K, 6500K 180 deg >80 30W
40W 4200lm
Other Specification
Housing & Casing Aluminum 6063 T5 Extruded with anodized and Heavy gauge sheet G.I Steel with cross blades louvers & epoxy powder coating
LED Philips
Ingress Protection IP57
Light Output Min of 50,000 hours lumens maintenance
Input Power Rating 220V @ 50-60Hz
Power Factor >0.95
Operating Temperature -40° Celsius to +85° Celsius
Ordering Code & Installation Guide
Ordering Code EXTRA-BUILT L-SERIES 8XX-XXX
CCT Wattage
L-Series Bollard LED Landscape Lighting
www.extrabuilt.com © 2018 Extra-Built (M) Sdn Bhd. All Right Reserved
EXTRA-BUILT DESIGN POWERED BY PHILIPS
Certification & Test Report
Approbation and Certification
IECEE- CB SCHEME DEKRA SURUHANJAYA TENAGA CE KEMA ROHS REACH
Dimension
Wattage Width Length Height Weight
20W
110mm 1200mm 125mm
9Kg
30W 9Kg
40W 9Kg
w H
L
w
Beam Shape
LED SOLAR LIGHTING
Innovative & Intelligent Efforts
SOLAR JSSC SERIES (AL-A)
Enquiry: Email: [email protected] (03-5523 7907)
The Extra-Built LED Solar lighting is optimized a basic LED solution for local and international application roadways. The design integrated all solar parts in one box. The heat sink directly into the unit or for heat transfer to prolong LED life. Just need to turn on the switch, then can work automatically. This solution lowers energy consumption and easy to install compared to conventional solar system need more wiring and each components separated. Designed to meet recommended luminance and illuminance requirement for local and all street road lighting specifications.
Lighting Specification
Code System Power Luminous Flux Solar Panel Battery Install Height *reference*
AL-A020 20W 2400lm 18V, 40W 12V, 18Ah 5-6M
AL-A040 40W 4800lm 18V, 60W 12V, 24Ah 6-7M
AL-A050 50W 6000lm 18V, 80W 12V, 36Ah 6-8M
AL-A060 60W 7200lm 18V, 90W 12V, 42Ah 6-10M
AL-A080 80W 9600lm 18V, 100W 12V, 44Ah 8-10M
AL-A100 100W 12000lm 18V, 120W 12V, 60Ah 10-12M
AL-A120 120W 14400lm 18V, 130W 12V, 66Ah 10-12M
Specification
System Voltage 12V Constant Current
Operating Temperature
-40° Celsius to + 60° Celsius
Electrical Protection Short Circuit, Overvoltage, Overcurrent, Overheat
Charge Time 6 - 7 Hours
Discharge Time Operating Autonomy: >8 hours Saving Mode (30% -50%): 3-5 rainy days
Controller 12V10A MPPT Solar
Led Brand Bridgelux (USA)
CRI >83
Color Temperature 2700K – 6500K
Beam Angle IESNA Type II
Light Output Min of 50,000 hours at L70 (70% lumen maintenance)
Efficiency (@T65 °C) 130±10lm/w
Housing & Casing Steel and Aluminum Sheet
Lens In PMMA with UV protection
Ingress Protection IP65
Impact Grade IK08
Warranty 3 Years
Dimension
Wattage ± 10%
Width (A)
Length (B) Height
(C) Weight
20W
305mm
940mm
140mm
10.5Kg
40W
1120mm
14.8kg
50W
440mm 19kg 60W
80W
100W
540mm 1270mm 150mm 29.8Kg
120W
Solar JSSC Series
www.extrabuilt.com © 2019 Extra-Built (M) Sdn Bhd. All Right Reserved
Polar Diagram Light Curve 100W
Accessories
Led Module Solar Panel
LED SOLAR LIGHTING
Innovative & Intelligent Efforts
SOLAR JSSC SERIES (AL-Y)
Enquiry: Email: [email protected] (03-5523 7907)
The Extra-Built LED Solar lighting is optimized a basic LED solution for local and international application roadways. The design integrated all solar parts in one box. The heat sink directly into the unit or for heat transfer to prolong LED life. Just need to turn on the switch, then can work automatically. This solution lowers energy consumption and easy to install compared to conventional solar system need more wiring and each components separated. Designed to meet recommended luminance and illuminance requirement for local and all street road lighting specifications.
Lighting Specification
Code System Power Luminous Flux Solar Panel Battery Install Height *reference*
AL-Y020 20W 2400lm 18V, 50W 12V, 17Ah 5-6M
AL-Y040 40W 4400lm 18V, 70W 12V, 30Ah 6-7M
AL-Y050 50W 5500lm 18V, 80W 12V, 36Ah 6-8M
AL-Y060 60W 6500lm 18V, 85W 12V, 36Ah 6-10M
AL-Y080 80W 9000lm 18V, 100W 12V, 60Ah 8-10M
AL-Y100 100W 11000lm 18V, 130W 12V, 80Ah 8-10M
AL-Y120 120W 13000lm 18V, 150W 12V, 88Ah 10-12M
Specification
System Voltage 12V Constant Current
Operating Temperature
-40° Celsius to + 60° Celsius
Electrical Protection Short Circuit, Overvoltage, Overcurrent, Overheat
Charge Time 6 - 7 Hours
Discharge Time Operating Autonomy: >8 hours Saving Mode (30% -50%): 3-5 rainy days
Controller 12V10A MPPT Solar
Led Brand Bridgelux (USA)
CRI >83
Color Temperature 2700K – 6500K
Beam Angle IESNA Type II
Light Output Min of 50,000 hours at L70 (70% lumen maintenance)
Efficiency (@T65 °C) 130±10lm/w
Housing & Casing Steel and Aluminum Sheet
Lens In PMMA with UV protection
Ingress Protection IP65
Impact Grade IK08
Warranty 5 Years
Dimension
Wattage ± 10%
Width (A)
Length (B) Height
(C) Weight
20W 310mm 960mm
45mm
11Kg
40W 340mm 1210mm 16kg
50W
460mm
1070mm
21kg 60W
80W 1210mm
100W 1570mm 27Kg
120W 1670mm 28kg
Solar JSSC Series
www.extrabuilt.com © 2019 Extra-Built (M) Sdn Bhd. All Right Reserved
Polar Diagram Light Curve 100W
Accessories
Led Module Solar Panel