LED Mini Spotlight - Rotating · 2020-04-30 · easy to change out batteries and bulbs. It uses...
Transcript of LED Mini Spotlight - Rotating · 2020-04-30 · easy to change out batteries and bulbs. It uses...
0.57 hrs
1 pcs
f
0.30 mm
k
0.40 mm
h
1
4.00 g
d
PrusaMK3/S
Summary
This is a simple, yet very useful design for a all-in-one spotlight. Afterscouring the internet for simple LED spotlight designs we could use toshow off Lego models with simple and easy accessible materials, I cameup with nothing.I created this design to make it easy change the angle of the light andeasy to change out batteries and bulbs. It uses very little filament andassembles in a snap. The battery carriage holds 1 3V CR2032 and the bulbis a 3mm or 5mm LED. Note: if the legs are extra long, you may need totrim them down a bit.
Hobby & Makers > Electronics
stopmotion stage spotlight light lego led fun
electronics cr2032
The only item that needs support is the bulb holder. Print this with thearms on your baseplate and the "nut" top facing up.
gFINN
LED Mini Spotlight -Rotating
VIEW IN BROWSER
updated 30. 4. 2020 | published 30. 4. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
726.9 KB
0.57 hrs f 0.30 mm k 0.40 mm h PLA 4.40 g d PrusaMK3/S
updated 30. 4. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
243.8 KBupdated 30. 4. 2020
145.7 KBupdated 30. 4. 2020
63.6 KBupdated 30. 4. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
spotlight_i3mk3.gcode
bulb-holder.stl
battery-holder.stl
spotlight-tube.stl