LED LIGHTING - uploads.invisionsales.com · LED LIGHTING HEADLIGHT BULBS AND INSERTS. Direct Fit...
Transcript of LED LIGHTING - uploads.invisionsales.com · LED LIGHTING HEADLIGHT BULBS AND INSERTS. Direct Fit...
LIGHTING• HEADLIGHT BULBS
• HEADLIGHT INSERTS
• JEEP SPECIFIC LIGHTING
• SIGNALLING BULBS
• CANBUS TECHNOLOGY
LED
LED LIGHTING HEADLIGHT BULBS AND INSERTS
Direct Fit – Page 10
880 / 881
Evo – Page 6Direct Fit – Page 10
H4
Evo – Page 6 Direct Fit – Page 10Fog Lamps – Page 11
H10
Direct Fit – Page 10
HB1 (9004)
Evo – Page 6Direct Fit – Page 10
HB3
Evo – Page 6Direct Fit – Page 10
H1
Evo – Page 6 & 7Evo (High Beam) – Page 8Evo (Low Beam) – Page 8Volkswagen – Page 9Direct Fit – Page 10
H7
Evo – Page 6Direct Fit – Page 10
H13
Evo – Page 6Direct Fit – Page 10Fog Lamps – Page 11
HB4
Evo – Page 6Direct Fit – Page 10
HIR2
Evo – Page 6Direct Fit – Page 10
H3
Evo – Page 6 & 7Direct Fit – Page 10Fog Lamps – Page 11
H8 / H9 / H11 / H16
Direct Fit – Page 10Multi Function – Page 11
H15
Direct Fit – Page 10
HB5 (9007)
Fog Lamps – Page 11
PS19W / PS24W / PSX24W
Contents
LED 7” Headlight Inserts Page 17
Model 8700 EVO 2 PROLED 7” Jeep Headlight Inserts Page 16
Model 8700 EVO J2
LED 7” Headlight Inserts Page 17
Model 8710LED 5¾” Headlight Inserts Page 18
Model 8631 EVO
Model 8632 EVOLED 5¾” Pedestal Headlight Page 18
LED 5” x 7” Headlight Inserts Page 19
Model 8900 EVO 2
LED 5¾” Headlight Inserts Page 18
Model 8630 EVO
LED 4” x 6” Headlight Inserts Page 18
Model 8800 EVO 2
LED 4” Jeep Fog Light Inserts Page 16
Model 6145 J2
LED Headlight, Fog Light & Driving Light Inserts
LED Signalling Replacements Page 14 & 15
Signalling
LED Headlight & Fog Light Bulb Conversion Kits
CANbus Technology LED Signalling Bulb Kits
CANbus to suit LED Kits Page 12
CANbus Kits
J.W. Speaker Corporation’s aftermarket LED products come with a Limited Warranty against defects in materials, components and workmanship. This Limited Warranty is not transferable and applies to the original installation of the J.W. Speaker Corporation LED light as long as the original consumer/purchaser owns the vehicle.
Please note that this warranty does not cover claims resulting from:
• Abuse, neglect and/or accidents
• Modifications and/or alterations
• Improper installation and/or use
• Chemicals and/or cleaners
• Voltage transients and/or spikes
In the unlikely event that you experience a problem that falls within the terms of the Limited Warranty, Invision Sales Pty Ltd, on behalf of J.W. Speaker Corporation will, at its discretion, either replace the defective product, or refund the purchase price of the product.
To make a warranty claim, simply return the product (along with all of the factory-issued components and proof of purchase) to the J.W. Speaker Corporation authorized dealer where the product was originally purchased and they will assist you with completing the claim process.
Note: Invision Sales Pty Ltd and J.W. Speaker do not cover the expense for removal or transportation of product to be claimed under this warranty statement.
This aftermarket product warranty is exclusive. J.W. Speaker Corporation has no other liability or obligation related to products. No other warranties are made; either expressed or implied, including without limitation, any implied warranties of title, non-infringement, merchantability or fitness for a particular purpose.
Limited Warranty Period:
• Headlamp inserts = 4 Years.
• Model Evolution 4000 LED Headlight Bulb Kits = 3 Years. (Mining & Industrial applications = 1 Year)
• Direct Fit LED Headlight Bulb Kits = 2 Years. (Mining and Industrial applications = 1 year)
• LED Signaling range = 2 Years. (Mining and Industrial applications = 1 year)
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
LED Product Warranty StatementAustralian Aftermarket
2 3
There are two types of headlight systems used in automotive vehicles and they both generate a beam pattern in very different ways.It is important to know which type your vehicle uses when selecting an LED bulb as some bulbs perform best in a particular headlight system.
Use the images below to determine the headlight style/s of your vehicle and keep an eye out for the Reflector or Projector icons and terminology on each Evolution 4000 LED bulb kit product page to see if they are suitable for your vehicle.
Reflector Style
Projector Style
Ultra long life
LED bulbs have an ultra long life and are expected to last for up to 30,000 hours. Standard halogen is rated at 500 hours and halogen long life is rated at 1,500 hours in comparison.
LED is also resistant to physical and electrical shock which is a major cause for halogen bulbs failing.
If you run the numbers you’ll see that not only are the J.W. Speaker LED Bulb Kits the ultimate upgrade performance wise but also incredibly good value!
Real white light
Halogen upgrade globes create a white light by applying a heavy blue coating to the glass. While this improves the light colour, it dramatically reduces the light output and the life expectancy.
LED delivers a much whiter light without these limitations. The LED chip actually generates the precise white colour while also benefiting from ultra long life and extremely high light output.
Power and precision
The LED’s extremely accurate light source delivers a precision beam pattern which results in no glare for oncoming traffic and the spread of light is incredibly even meaning there are no hot-spots or dark patches across the road.
LED LIGHTING IS THE FUTURETHIS IS WHY YOU SHOULD CONSIDER IT
REFLECTOR & PROJECTOR HEADLIGHTS
HOW TO CHOOSE THE CORRECT BULB
=
LED BULB KITS
4 5
Part No. Base
990001 H1
990003 H3
990004 H4
990005 HB3 / H10
990006 HB4
990007 H7
990011 H8 / H9 / H11 / H16
990012 HIR2
990013 H13
Model Evolution 4000 Reflector Optimised
Reflector Optimised
LED Headlight Bulb Kits
External electronic driver To deliver the extreme power of the Model Evolution 4000, the kit includes an externally wired LED driver module. The new braided cable is a lot more flexible than the previous version, making installation a breeze.
The Model Evolution 4000 is 180% brighter than a standard halogen bulb, has an expected life span of up to 30,000 hours and comes in an ultra white light of 6000K. This powerful product is the premium halogen bulb replacement.
There are 9 products in this range (listed below) that are engineered and optimised to perform best in a reflector style headlight. The new product design means the LED chips on either side of the bulb are closer together, producing a sharper and fuller beam pattern on the road.
If you’re looking for the ultimate in LED bulb performance, there is no better option than the new Evolution 4000 range.
Evolution 4000 Re-designed for ultimate performance
The Model Evolution 4000 offers the same technical specifications as the old Model 4000 but there are a couple of key improvements that make this Evolution 4000 model the superior option.
• Smaller bulb sizing means less fitment issues
• Side exit cabling (on most base types) means little to no dust cap fitment issues
• Smaller, less intrusive power module which is now hard wired in with no connector plugs
• Shorter overall length to help fit most headlights
Part No. Base
990007P H7
990011P H8 / H9 / H11 / H16
Model Evolution 4000 Projector Optimised
Projector Optimised
Evolution 4000 Specifications• Lumen: 2000 per bulb • Colour Temp: 6000K• Power: 25W Per Beam • Voltage: DC12–24V• Operating temperatures: -40°/ +130°C• IP Rating: IP65• Lifetime: Up to 30,000 hours
Standard halogen – Low Beam Model Evolution 4000 – Low Beam
Kit Contains2 x LED Headlight Bulbs
This product range is not approved for ADR, ECE or DOT
Warranty3 Year – Standard Driving Conditions: For normal day to day driving & recreational 4X4.
1 Year – Off-Highway: For mining and industrial applications.
There are 2 products in this range (listed below) that are engineered and optimised to perform best in a projector style headlight.
The difference between this design and the standard reflector bulb design is the placement of the LED chip boards. The V shape configuration works specifically with the projector style lens to produce the smoothest and most powerful beam pattern seen from an LED bulb.
The Evolution 4000 Projector range is an exciting and new addition to the LED Bulb Kit program.
LED Headlight Bulb Kits
New Bulb Design
LED BULB KITS
6 7
Part No. Base
990007C1 H7 with adaptor clip
LED Headlight Bulb Kits
Part No. Base
990007PC1 H7 with adaptor clip & rubber dust cap
LED Headlight Bulb Kits
Model Evolution 4000 Reflector Optimised
Model Evolution 4000 Projector Optimised
Vehicle & Beam SpecificThe 990007C1 is optimised for Ford FG, SZ Territory and a number of other vehicles that use a H7 high beam bulb with a specific retaining clip.
This product has the retaining clip pre-installed onto the bulb to make fitment even easier. It is not recommended to use this product in any other application.
For product specifications and warranty see page 7.
Vehicle & Beam SpecificThe 990007VW is unique in that it is designed specifically to replace Volkswagen H7 low beam bulbs that use a very specific clip-in system. This system has been used in other vehicles by other manufacturers but it has been predominantly used by Volkswagen.
A key feature with this range is that it has built in CANbus technology, meaning the LED bulb will be able to communicate with the vehicle without causing any errors or fault codes.
It is recommended to consult a qualified auto electrician before installing this product to make sure it is suitable for your vehicle. A list of Volkswagen models that this product is suitable for can be found below.
The 990007PC1 is optimised for Ford FG, SZ Territory, Kenworth T610 Aero and a number of other vehicles that use a H7 low beam bulb with a specific retaining clip.
This product has the retaining clip pre-installed onto the bulb to make fitment even easier. It is not recommended to use this product in any other application. This kit also includes a rubber dust cap to replace the original cap for better product fitment.
For product specifications and warranty see page 7.
Vehicle & Beam Specific
Reflector Optimised – Vehicle & Beam Specific
Projector Optimised – Vehicle & Beam Specific
Model 4000 Low Beam Optimised
Vehicle & Beam Specific
Part No. Base
990007VW H7 with built-in adaptor base
Warranty3 Year – Standard Driving Conditions: For normal day to day driving & recreational 4X4.
Kit Contains2 x LED Headlight Bulbs
Product Specifications• Lumen: 2000 per bulb • Colour Temp: 6200K• Power: 25W Per Beam • Voltage: DC12V• Operating temperatures: -40°/ +130°C• IP Rating: IP65• Built In CANbus
This product range is not approved for ADR, ECE or DOT
• EOS• Golf VI• Golf VII
• Jetta VI• Tiguan 1• Tiguan 2
Vehicle Fitting Guide
Vehicles from 2010 onwards
LED BULB KITS
98
LED Headlight Bulb Kits
Improve your safety while driving through poor weather conditions with these Direct Fit style LED fog light bulbs. Designed to illuminate the road and reflective markers beneath low lying fog, these are the perfect fog light bulbs to compliment your headlights at an entry level price.
The H15 bulb type has become very popular with vehicle manufacturers in recent years, with its dual filament system offering a high beam and lower output daytime running light beam from the same bulb. Due to the nature of the way it’s locked into the headlight, the Direct Fit system is the only high quality H15 option on the market.
990015F is considered a halogen replacement compared to the higher output 999015 which is more of a performance upgrade.
Part No. Base
999001 H1
999003 H3
999004 H4
999005 HB3
999006 HB4
999007 H7
999010 H10
999011 H8 / H9 / H11 / H16
999012 HIR2
999013 H13
999015 H15
999016 HB1 (9004)
999017 HB5 (9007)
999881 880 / 881
Fog Light Bulbs – Be prepared for extreme weather conditions
H15 Multi Function Bulb
Direct Fit Specifications• Lumen: 1800 per bulb • Colour Temp: 6000K• Power: 18W Per Beam • Voltage: DC12–24V• Operating temperatures: -40°/ +130°C• IP Rating: IP65• Lifetime: Up to 30,000 hours
Kit Contains2 x LED Headlight Bulbs
This product range is not approved for ADR, ECE or DOT
Kit Contains2 x LED Bulbs
This product range is not approved for ADR, ECE or DOT
Warranty2 Year – Standard Driving Conditions: For normal day to day driving & recreational 4X4.
Warranty2 Year – Standard Driving Conditions: For normal day to day driving & recreational 4X4.
1 Year – Off-Highway: For mining and industrial applications.
Fog & Multi-Function Specifications• Lumen: 550 per bulb (Fog) 80/600 per bulb (H15) • Colour Temp: 6000K• Power: 30W Per Beam • Voltage: DC12–24V• Operating temperatures: -40°/ +130°C• IP Rating: IP65• Lifetime: Up to 30,000 hours
Direct Fit
Fog Light
Multi Function
Part No. Base
990006F HB4
990008F H8 / H9 / H11 / H16
990010F H10
990019 PS19W / PS24W / PSX24W
Part No. Base
990015F H15
LED BULB KITS
LED Fog Light Bulb Kits
LED Multi Function Bulb Kits
The Direct Fit range has an identical connection system to the existing halogen bulb they are going to replace. It’s the ideal DIY solution that’s as easy as removing the old halogen bulb and replacing it with the new LED bulb.
The range includes built-in CANbus technology so the bulbs are installed without the need for additional wiring harnesses.
The whole Direct Fit range are an excellent upgrade over traditional halogen with 1800 Lumens per bulb and a pure white light rated at a colour temperature of 6000K.
Some vehicles’ electrical systems may require the installation of CANbus kits even though the bulbs are CANbus compatible.
Please see page 12.
Direct Fit – The identical connection system to halogen bulbs
10 11
3 CANbusMost vehicles will not require a CANbus module to be installed along with your new LED bulb kit/s however there are a few vehicles that have been confirmed to require something to allow the bulbs to function properly. If you have a vehicle that may fall under one of these listed, please call Invision Sales prior to purchase and installation for CANbus advice.
• Ford Ranger – Most models• Mazda BT50 – Most models• Audi Q7 & TT• BMW 5 Series & X3
CANbus KitsKits are suitable for both the Model Evolution 4000 and Direct Fit
1 Headlights • I want better headlight performance than my current bulbs but simply want to plug them in
and start driving. Go directly to page 10 to pick out your new Direct Fit LED headlight bulbs!
• I want maximum headlight performance and am OK with some more advanced installation. Use the diagrams on page 5 (or below) to establish your headlight style and then proceed to
pages 6 & 7 to pick out your new Evolution 4000 LED headlight bulbs!
2 Fog Lights• I want better fog light performance than my current bulbs but simply want to plug them in and start
driving. Go directly to pages 10 & 11 to pick out your new Direct Fit LED fog light bulbs!
• I want maximum fog light performance and am OK with some more advanced installation. Proceed to page 6 to pick out your new Evolution 4000 LED fog light bulbs.
Please note: Evolution 4000 bulb installation may not be possible on some fog light assemblies due to the limited space at the back of most designs. We strongly recommend consulting a qualified auto electrician for advice prior to purchase.
Some vehicle electronic systems may conflict with the LED bulb. There are a limited number of vehicles who’s electronic systems may require the addition of a CANbus unit during installation. The CANbus unit will allow the vehicles electronics to accept the LED bulb into its system.
One simple way of checking if your vehicle is monitoring your headlight bulbs is to:
1. Carefully disconnect one of your headlight bulbs
2. Start your vehicle and turn on your headlights
3. If you are receiving a ‘globe out’ warning light anywhere inside your vehicle, you will likely require an Electronic style CANbus product.
Resistor style CANbus is typically required when additional lights are fitted to a vehicle and wired into high beam which is common for 4X4 vehicles using light bars and driving lights.
Before fitting the LED headlight conversion kit, we suggest you consult a qualified Auto Electrician or call Invision Sales to see if your vehicle is listed as requiring a CANbus product. The majority of vehicles will not require any CANbus products.
Part No. Base Voltage
990001CB H1 / H3 12V
990004CB H4 12V
990004CB24 H4 24V
990005CB HB3 / HB4 / H10 / HIR2 12V
990007CB H7 12V
990007CB24 H7 24V
990011CB H8 / H9 / H11 / H16 / H27 12V
990004ECB H4 12V
990005ECB HB3 / HB4 12V
990007ECB H7 12V
990011ECB H8 / H9 / H11 / H16 12V
990012ECB HIR2 12V
990004RCB H4 12V
990004RCB24 H4 24V
990005RCB HB3 12V
990006RCB HB4 12V
990007RCB H7 12V
990007RCB24 H7 24V
990011RCB H8 / H9 / H11 / H16 12V
Electronic CANbus example
Resistor CANbus example
All-In-One CANbus example
All In One Complete CANbus
Electronic Only CANbus – Stronger Electronics
Resistor Only CANbus – Stronger Resistors
• Holden VF Commodore• Holden RG Colorado• Nissan Navara – Most models• Nissan Patrol – Most models
• Toyota Hilux – Some models• Toyota Landcruiser – Some models• Volkswagen – Most models• Jeep – Most models
Reflector Style
Projector Style
LED CANBUS TECHNOLOGY
Picking the right product/s for you and your vehicle doesn’t need to be stressful and confusing. Use the below key questions to filter through the jargon and begin driving with your brand new LED headlights!
LED BULB KIT SUMMARY & BUYING GUIDEA SIMPLE BREAKDOWN OF YOUR OPTIONS
LED BULB KITS
12 13
Part No. Base Colour Bulb Type Lumen Pack Qty. Voltage
990140 BA15s White 6000K P21W 360LM Twin 12V–24V
990142 BAU15s Amber PY21W 250LM Twin 12V–24V
990144 BAY15d Red P21/5W 360/120LM Twin 12V–24V
990145 BA15s White 6000K R5W & R10W 280LM Twin 12V–24V
990147 BA9s White 6000K T4W 68LM Twin 12V
990148 BA9s White 6000K T4W 68LM Twin 24V
Reversing
990140HO BA15s White 6000K P21W 700LM Twin 12–24V
Festoon Replacement Range:
Bayonet Replacement Range:
Part No. Base Colour Bulb Type Lumen Pack Qty. Voltage
990100 SV8.5 / 31 x 10.5 White 6000K C5W 68LM Single 12V
990102 SV8.5 / 36 x 10.5 White 6000K C10W 68LM Single 12V
990103 SV8.5 / 36 x 10.5 White 6000K C10W 68LM Single 24V
990104 SV8.5 / 41 x 10.5 White 6000K C21W 68LM Single 12V
Brand new, high powered reversing light bulb kit.
Part No. 990140HO
LED Signalling Bulb Kits
Part No. Type Pack Qty. Voltage
990160 5W Twin 12V
990161 25W Twin 12V
990165 25W Twin 24V
Wedge Replacement Range:
Resistor RangeSignalling Bulb Kit Warranty
2 Year – Standard Driving Conditions: For normal day to day driving & recreational 4X4.
1 Year – Off-Highway: For mining and industrial applications.
This product range is not approved for ADR, ECE or DOTNote: A CANbus resistor may be required on some vehicles when fitting this
signalling range.
Please consult a qualified Auto Electrician if you experience issues.
5W 25W
Part No. Base Colour Bulb Type Lumen Pack Qty. Voltage
990110 T10 White 6000K W5W 65LM Twin 12V
990111 T10 White 6000K W5W 65LM Twin 24V
990114 T10 (CANbus) White 6000K W5W 98LM Twin 12V
990120 T16 White 6000K W16W 350LM Twin 12V–24V
990122 T16 Amber WY16W 250LM Twin 12V–24V
990124 T20 White 6000K W21W 360LM Twin 12V–24V
990126 T20 Amber WY21W 250LM Twin 12V–24V
990128 T20 White 6000K W21/5W 360/120LM Twin 12V–24V
990130 S8 White 6000K 3157 360/120LM Twin 12V–24V
990132 S8 Amber 3157 253/88LM Twin 12V–24V
Enjoy the benefits of ultra-long life and high intensity for increased road safety
Aside from the known benefits of increased life, LED Signalling bulbs actually offer one more vital upgrade over standard incandescent bulbs which is ‘activation speed’. Something people don’t often consider is the speed at which a bulb reaches full illumination. Traditional signalling bulbs take time to ignite and reach full output, compared to LED bulbs which reach maximum intensity almost instantaneously. This means that the LED bulb can be ‘seen’ much quicker than the incandescent bulb and in a traffic situation where milliseconds can make the difference, LED bulbs are the safest choice.
Incandescent Reduced Stopping Distance
LED IncreasedStopping Distance
7.4m
2m
With LED bulbs, the driver sees the brake lights earlier and gains a vital 5.4m stopping distance.Based on a vehicle travelling at 100km.
The near instantaneous illumination of LED gives drivers more time to stop
LED SIGNALLING BULB KITS
14 15
Model 8700 EVO 2 PRO (Low Beam / High Beam / Park / DRL)
Model 8710 & TS4000 (High Beam)
LED 7” Headlight InsertsLED Jeep Lighting
Part No. Bezel Beam Functions Pack Qty
0556961 Black Low / High / Park / DRL Single
0556951 Chrome Low / High / Park / DRL Single
Part No. Bezel Beam Functions Pack Qty
0551693 Black Driving Beam Twin Pack
0551603 Chrome Driving Beam Twin Pack
Part No. Bezel Beam Functions Pack Qty
0550021 Black High Beam Single
0550011 Chrome High Beam Single
TS4000 Product Range (8710 Pedestal Mount)
8700 EVO 2 PRO Specifications• Lumen: Raw: 4,170 (High); 2,340 (Low)
Effective: 1,340 (High); 694 (Low)• Colour Temp: 5000K • Voltage: DC12–24V• Operating temperatures: -40°/ +65°C• IP Rating: IP67• Lifetime: Up to 40,000 hours
8710 & TS4000 Specifications• Lumen: Raw: 3,300 – Effective: 1,440• Colour Temp: 5000K • Voltage: DC12–24V• Operating temperatures: -40°/ +65°C• IP Rating: IP67• Lifetime: Up to 40,000 hours
8700 EVO J2 Specifications• Lumen: Raw: 2,610 (High); 1,770 (Low)
Effective: 1,150 (High); 750 (Low)• Colour Temp: 5000K • Voltage: DC12V• Operating temperatures: -40°/ +65°C• IP Rating: IP67• Lifetime: Up to 40,000 hours
6145 J2 Specifications• Lumen: Raw: 1,080 – Effective: 610• Colour Temp: 5000K • Voltage: DC12V• Operating temperatures: -40°/ +65°C• IP Rating: IP67• Lifetime: Up to 40,000 hours• Vehicle Information: This product is suitable for the following vehicles.2014 – 2016 Jeep Wrangler 2-Door (JK)2014 – 2016 Jeep Wrangler Unlimited 4-Door (JK)
8700 EVO 2 PRO
TS4000 – 8710 Pedestal Mount8710
8700 EVO J2
6145 J2
Visit www.invisionsales.com to see our full range of Jeep lighting
The J.W. Speaker Jeep Lighting range is the perfect option for your JK Wrangler, with built in anti-flicker CANbus technology and plug & play wiring, it couldn’t be any easier to experience incredible LED technology in your Jeep.
The 7” round headlight inserts are available in both a black look bezel and a carbon look bezel depending on the look you’re going for.
2019 sees the release of the brand new 8700 EVO 2 PRO, an upgraded version of the original 7” headlight insert.
While there is no major cosmetic difference from the old model, the new EVO 2 PRO comes with a brand new optic design for an improved beam pattern.
Suitable for most vehicles that use a 7” round headlight insert, the 8700 EVO 2 PRO is reliable and powerful.
Bumper mount fog light replacements are also available in the same bezel style options as the headlights for that matching look we all enjoy.
The fog lights use the same anti-flicker CANbus technology as the headlights so installation is a breeze.
For vehicles that have four headlight assemblies (typically trucks) which often includes two dedicated high beam lights, the 8710 is a best-in-class option.
With a powerful single high beam, this unit will give you confidence while driving on those back country roads or rural highways where external lighting is at a minimum.
This light is also available in a pedestal mount option (Model TS4000) meaning you can mount these to a vehicle front bar and still gain the benefits of an extra high beam.
ADRAPPROVED
ADRAPPROVED
ADRAPPROVED
LED HEADLIGHT INSERTS
Model 8700 EVO J2 – LED 7” Headlight Inserts Designed for Jeep (Low Beam / High Beam / Park / DRL)
Model 6145 J2 – LED 4” Fog Light Inserts Designed for Jeep Wrangler Bumper Retro-Fit
Part No. Bezel Beam Functions Pack Qty
0553993 Carbon Low / High / Park / DRL Twin Pack
0554563 Black Low / High / Park / DRL Twin Pack
Part No. Bezel Beam Functions Pack Qty
0554413 Carbon Fog Light Twin Pack
0554573 Black Fog Light Twin Pack
ADRAPPROVED
16 17
Model 8630, 8631 & 8632 (Low Beam / High Beam / Park / DRL / Turn)
Model 8900 EVO 2 (Low Beam / High Beam / Park)
Model 8800 EVO 2 (Low Beam) & (High Beam)
LED 5¾” Headlight Inserts
LED 4 x 6” Headlight Inserts
Part No. Beam Functions Pack Qty
0549921 Low / High / Park / DRL Single
0551641 Low / High / Park / DRL / Turn Single
Part No. Bezel Beam Functions Pack Qty
0552561 Black Low Beam Single
0552571 Black High Beam Single
0551391 Chrome Low Beam Single
0551381 Chrome High Beam Single
Part No. Bezel Beam Functions Pack Qty
0554451 Black Low / High / Park Single
0554431 Chrome Low / High / Park Single
Part No. Beam Functions Pack Qty
0551973 Low / High / Park / DRL / Turn Twin Pack
8630, 8631 & 8632 Specifications• Lumen: Raw: 2,925 (High); 2,025 (Low)
Effective: 1,000 (High); 630 (Low)• Colour Temp: 5000K • Voltage: DC12–24V• Operating temperatures: -40°/ +65°C• IP Rating: IP67• Lifetime: Up to 40,000 hours
8900 EVO 2 Specifications• Lumen: Raw: 2,640 (High); 2,250 (Low)
Effective: 1,200 (High); 975 (Low)• Colour Temp: 5000K • Voltage: DC12–24V• Operating temperatures: -40°/ +65°C• IP Rating: IP67• Lifetime: Up to 40,000 hours
8800 EVO 2 Specifications• Lumen: Raw: 2,250 (High); 2,830 (Low) Effective: 898 (High); 782 (Low)• Colour Temp: 5000K • Voltage: DC12–24V• Operating temperatures: -40°/ +65°C• IP Rating: IP67• Lifetime: Up to 40,000 hours
8630 & 8631
8800 EVO 2
8900 EVO 28632 – Pedestal Mount
LED 5 x 7” Headlight Inserts
For the full extended range of LED lighting by J.W. Speaker, visit www.invisionsales.com
Suitable for a range of truck, bus and older light vehicles, the 5¾” headlight insert range is engineered to be just as powerful as the much larger inserts making it the perfect choice at this insert size. It is also available in pedestal mount if you require a multi-functioning light mounted to a bar.
As the largest in the rectangle headlight insert range, the 8900 EVO 2 mounting options are a little more limited but for vehicles that they do fit, prepare for the unmatched light output and beam quality.
The 4 x 6” sized headlight inserts have been a staple for many vehicles over the years, most notably Western Star trucks. The J.W. Speaker LED options come in dedicated low and high beams with bezels in black and chrome.
With a strong and sharp beam pattern in a nice white 5000K colour, driving at night becomes a lot more enjoyable and safer with the 8800 EVO 2 headlight inserts.
ADRAPPROVED
ADRAPPROVED
ADRAPPROVED
18 19
LED HEADLIGHT INSERTS
www.invisionsales.comenquiries@ invisionsales.com Ph: 03 9336 2066
CAR • 4X4 • TRUCK • MOTORCYCLE
For further details about the J.W. Speaker range contact Invision Sales.
Invision Sales are the Asia Pacific distributors for J.W. Speaker Corporation.
PREMIUM STYLING, LONG LIFE PERFORMANCE
LED