LED LAMP,INDUSTRIAL LED,PRODUCTION PROCESS OF LED,MODERN LIGHTING
-
Upload
sk-rabial -
Category
Engineering
-
view
259 -
download
3
Transcript of LED LAMP,INDUSTRIAL LED,PRODUCTION PROCESS OF LED,MODERN LIGHTING
PRESENTATION ON INDUSTRIAL LED LAMP…
SUBAJIT PARBAT (38)SK.RABIAL (40)DETCE2ND YEARR.K.M.S.
CONTENT…
Introduction.Manufacturing of LED DRIVER.Manufacturing of LED ENGINE.Quality checking process.Conclusion.
CONCEPT OF INDUSTRIAL LED…
LED stands for Light Emitting Diode.
An Industrial LED lamp is an special type of LED lamp which consists of many small LEDs or group of LEDs to create a large amount of illumination.
DIFFERENT PARTS OF INDUSTRIAL LED…
LEDLED
DRIVER
LED ENGINE
CONCEPT OF DRIVER…
An LED DRIVER Is one kind of Switch Mode Power Supply which helps to drive or to run the LED lamp.
It may consists of Switching MOSFET, Chopper Transformer, Rectifier DIODE, Resistor, Capacitor, Inductor etc.
It is the main part of the circuit by the help of which the LED can glow.
STORING OF COMPONENTS…
All the components are stored in a closed room which is cleaner than ICU.
The components are stored at the temperature of (22 to 28) degree celsius.
Under this condition the components can be stored for more than 1 year.
DIFFERENT TYPES OF COMPONENTS…
MI(Manual Insertion)• INSERTION means the action of
inserting something.
SMD(Surface Mounted Device )• It is one kind of miniature type
component.
MANUAL INSERTION PROCEDURE…
The large components goes to the PREFORMING ROOM.
Here the components are PREFORMED…that means the leads of the components are cut for the soldering.
It helps to solder the components easily on the circuit board.
PROCESSING OF SMD COMPONENTS…
SMD components goes to the PRINTING ROOM.
There are two types of machines generally used….
SMD LOADER
PCV PRINTER
SMD MOUNTING PROCESS…
SMD MOUNTING MACHINE is used for mounting the SMD components on the PRINTED CIRCUIT BOARD(PCV).
VIDEO
CONCEPT OF LED ENGINE…
It is the outer portion of the LED lamp.
It mainly consists of LED.
It is driven by the LED DRIVER circuitry.
LED HEAT SINK
DIFFUSER CONNECTER
MAIN PARTS OF LED ENGINE…
SOLDERING PROCEDURE…
All the soldering done in this company is completely lead free.
Mainly Ag , Cu , Sn are used here as soldering reagent.
Wave soldering
Reflow soldering
QUALITY CHECKING PROCEDURE…
X-RAY STOCK TEST OR BURN TEST
AOI(Automatic
Optical Inspection)
DROP TEST ILLUMINATION TESTING
CCT(Color Composite and Temperature
Testing)
A BRIEF DETAILS ABOUT THE QUALITY CHECKING PROCEDURE…
BURN TEST
X-RAY TEST AOI
CONTINUE…
DROP TESTILLUMINATION TEATINGCCT
SOME PRODUCTS MANUFACTURED IN UMA POLYSOLUTION…
FAMILY DOWN LIGHT PHILIPS ULTIMAGREEN LIGHT LED
INDUSTRIAL SAFETY…
THE SCOPE OF LEARNING…
The opportunity of gathering practical knowledge.
Many informative things behind our conventional syllabus.
The industrial atmosphere. The collaboration of the workers with in
the industry.
ACKNOWLEDGEMENT…
To the entire family of Ramakrishna Mission Shilpamandira.
To all the working people of UMA Poly solution for their cordial support for their industrial visit…
THANK YOU…