LED Grid Lite & Panel System

1
Grid-Lite GRID-LITE & Panel System GRID POWER Choose from available AC and/or DC distribution. Armstrong Grid ties simplify installation and lower cost through the elimination of traditional wiring, conduit, and installation labor. POWER SUPPLY OPTIONS AC to DC conversion provided for one lamp, and up to 30 lamps per power supply. Low Voltage Wiring or choice in above ceiling power bus bar or track lighting extends the power supply ports. Select from a range of storage battery technologies. OPTIONAL WIRELESS CONTROLS Advanced non battery powered Wireless Controllers for AC and/or DC systems. No more holes in walls for switches. Now, you can paint or wallpaper then place your switch and remote dimmer or choose a location that suits your unique taste. INTELLIGENT MONITORING Available packaged and custom software for monitoring and management. Reduce the consumption of energy up to 78% without sacrificing the quality of service. GRID-LITE & PANEL SYSTEM IP UtiliNET achieves symmetry in design, long life, low maintenance, and simplified installation with the Grid Lite & Panel System. Featuring the energy efficient lampless grid-lite panel, the system offers a wide range of choice in power , control, monitoring, and management configuration. GRID-LITE Grid-Lite is an advanced 24 Volt DC based 2X2 lampless LED panel light that can be installed in a ceiling grid, on a wall, or in a custom enclosure. Customers have a choice of 4100 Kelvin Neutral Grid-Lites which will brighten commercial office spaces or soothe with the warmth of 3100 Kelvin. Choose your lighting temperature first, then choose to operate at the full 45 Watt consumption or dim to suit energy efficiency and user goals. Complement the system with available wireless smart controls. The evolution to advanced DC power lighting and switching is not a question of when it will be available, it is now a question of when to proceed and what components to use. Traditional AC fluorescent troffers cost more to install, operate, maintain, and radiate heat causing your cooling systems to work harder. INNOVATIVE SOLUTIONS FOR FACILITY ENERGY NEEDS GRID-LITE SPECIFICATIONS 3100 or 4100 Kelvin per panel 3400 Lumens per panel CRI; 80 Lumens per watt; >70 Weight; 5.5 lbs 120/277 VAC Auto Sensing Power Supply 24 VDC, 1.7A Grid Lite Power Requirement ETL Safety Tested and Listed Operating Environment; For dry or damp locations, Temperature 0 to 40 degrees C, Humidity 10% to 90% non-condensing Lifetime; 50,000 hours Dimmer; Remote, Dial, Wireless, Software Up to 30 lamps on a single power supply Made in USA, Patent Pending 6825 Shiloh Road East, STE B-7 Alpharetta, GA 30005 P (877) 901-6947 www.iputilinet.com [email protected] Shown with Optional DC Power and Renewables (LADER)

description

The advantage is clearly LED. This solution eliminates the need for AC wiring to fixtures and switches. Switches transform to wireless with no need for batteries. Now you can paint and wallpaper, then stick your switches where you want them.

Transcript of LED Grid Lite & Panel System

Page 1: LED Grid Lite & Panel System

Grid-Lite

GRID-LITE & Panel System

GRID POWER

Choose from available AC and/or

DC distribution. Armstrong Grid

ties simplify installation and

lower cost through the

elimination of traditional wiring,

conduit, and installation labor.

POWER SUPPLY OPTIONS

AC to DC conversion provided

for one lamp, and up to 30 lamps

per power supply. Low Voltage

Wiring or choice in above ceiling

power bus bar or track lighting

extends the power supply ports.

Select from a range of storage

battery technologies.

OPTIONAL WIRELESS

CONTROLS

Advanced non battery powered

Wireless Controllers for AC

and/or DC systems. No more

holes in walls for switches. Now,

you can paint or wallpaper then

place your switch and remote

dimmer or choose a location that

suits your unique taste.

INTELLIGENT MONITORING

Available packaged and custom

software for monitoring and

management.

Reduce the consumption of energy up to 78%

without sacrificing the quality of service.

GRID-LITE & PANEL SYSTEM

IP UtiliNET achieves symmetry in design, long life, low maintenance, and simplified installation with the Grid Lite

& Panel System. Featuring the energy efficient lampless grid-lite panel, the system offers a wide range of choice in

power , control, monitoring, and management configuration.

GRID-LITE

Grid-Lite is an advanced 24 Volt DC based 2X2 lampless LED panel light that can be installed in a ceiling grid, on

a wall, or in a custom enclosure. Customers have a choice of 4100 Kelvin Neutral Grid-Lites which will brighten

commercial office spaces or soothe with the warmth of 3100 Kelvin. Choose your lighting temperature first, then

choose to operate at the full 45 Watt consumption or dim to suit energy efficiency and user goals. Complement the

system with available wireless smart controls.

The evolution to advanced DC power lighting and switching is not a question of when it will be available, it is now a question of when to proceed and what components to use. Traditional AC fluorescent troffers cost more to install, operate, maintain, and radiate heat causing your cooling systems to work harder.

INNOVATIVE SOLUTIONS FOR FACILITY ENERGY NEEDS

GRID-LITE SPECIFICATIONS

3100 or 4100 Kelvin per panel

3400 Lumens per panel

CRI; 80

Lumens per watt; >70

Weight; 5.5 lbs

120/277 VAC Auto Sensing Power Supply

24 VDC, 1.7A Grid Lite Power Requirement

ETL Safety Tested and Listed

Operating Environment; For dry or damp

locations, Temperature – 0 to 40 degrees C,

Humidity – 10% to 90% non-condensing

Lifetime; 50,000 hours

Dimmer; Remote, Dial, Wireless, Software

Up to 30 lamps on a single power supply

Made in USA, Patent Pending

6825 Shiloh Road East,

STE B-7

Alpharetta, GA 30005

P (877) 901-6947

www.iputilinet.com [email protected]

Shown with Optional DC Power

and Renewables (LADER)