LED driver 36W 0.3-1A 48V 230V - yunyangsh.com...LED driver 36W 0.3-1A 48V 230V June 13, 2013...
6
LED driver 36W 0.3-1A 48V 230V June 13, 2013 Electrical input data Specification item Value Unit Condition Nominal input voltage 220...240 V ac Nominal input frequency 50...60 Hz Nominal input current 0.2 A Input voltage 230 V ac , full load Nominal input power 42 W Input voltage 230 V ac , full load Power factor ≥ 0.9 Input voltage 230 V ac , full load Total harmonic distortion ≤ 30 % Input voltage 230 V ac , full load Efficiency 85 % Input voltage 230 V ac , full load, maximum output voltage Input voltage AC 202...254 V ac Performance range Input frequency AC 47.5...63 Hz Maximum permissible range
Transcript of LED driver 36W 0.3-1A 48V 230V - yunyangsh.com...LED driver 36W 0.3-1A 48V 230V June 13, 2013...
LED driver 36W 0.3-1A 48V 230VJune 13, 2013
Electrical input dataSpecification item Value Unit ConditionNominal input voltage 220...240 Vac
Nominal input frequency 50...60 HzNominal input current 0.2 A Input voltage 230 Vac, full loadNominal input power 42 W Input voltage 230 Vac, full loadPower factor ≥ 0.9 Input voltage 230 Vac, full loadTotal harmonic distortion ≤ 30 % Input voltage 230 Vac, full loadEfficiency 85 % Input voltage 230 Vac, full load, maximum output voltageInput voltage AC 202...254 Vac Performance rangeInput frequency AC 47.5...63 Hz Maximum permissible range
Electrical output dataSpecification item Value Unit ConditionRegulation method Constant CurrentOutput voltage 24...48 Vdc
Output voltage max 60 Vpk Peak voltage at open loadOutput current 0.3...1 A Full output current settingOutput current tolerance ± 8 %Output current ripple ≤ 30 % Ripple = peak / averageOutput power 14...37 W Full outputGalvanic isolation SELV Lamp to mains
Electrical data controls inputSpecification item Value Unit ConditionControl method Fixed
WiringSpecification item Value Unit ConditionInput wire cross-section 0.2...1.5 mm2 WAGO250 (3.5 mm), solid wire
16...24 AWG WAGO250 (3.5 mm), solid wireInput wire strip length 8.5...9.5 mmMaximum cable length 60 mm Total length of wiring including LED module, one way
Dimensions and weightSpecification item Value Unit ConditionLength (A1) 104 mmWidth (B1) 68 mmHeight (C1) 32 mmFixing hole diameter (D1) 4 mmFixing hole distance (A2) 93.5 mmWeight 132 gram
June 13, 2013 © 2013 Koninklijke Philips Electronics N.V. All rights reserved.LED driver 36W 0.3-1A 48V 230V Page 2 of 6
Operational temperatures and humiditySpecification item Value Unit ConditionAmbient temperature +0...+50 ºCTcase-max 75 ºC Maximum temperature measured at Tc-point
(lifetime reduced by 50%)Tcase-life 65 ºC Measured at Tc-pointMaximum housing temperature 130 ºC In case of a failureRelative humidity 10...90 % Non-condensing
Storage temperature and humiditySpecification item Value Unit ConditionAmbient temperature -25...+85 ºCRelative humidity 5...95 % Non-condensing
LifetimeSpecification item Value Unit ConditionDriver lifetime 30,000 hours Measured temperature at Tc-point is Tcase-life.
Maximum failures = 10%
FeaturesSpecification item Value Unit ConditionOpen load protection Yes Automatic recoveringShort circuit protection Yes Automatic recoveringOver power protection Yes Automatic recoveringHot wiring NoSuitable for fixtures with protection class I and IISet output current Rset2 See Design-in guide.
Default output current: 1 ALED module temperature derating NoConstant Lumen Over Lifetime NoDCemDim No
Certificates and standardsSpecification item Value Unit ConditionApproval marks ENEC / CE / CQCIngress Protection classification 20
June 13, 2013 © 2013 Koninklijke Philips Electronics N.V. All rights reserved.LED driver 36W 0.3-1A 48V 230V Page 3 of 6
Additional information
Inrush current
Specification item Value Unit ConditionInrush current Ipeak 6 A Input voltage 230VInrush current Twidth 55 µs Input voltage 230V, measured at 50% Ipeak
Drivers / MCB 16A type B ≤ 40 pcs
Earth leakage currentSpecification item Value Unit ConditionEarth leakage current 0.7 mApk LED module contribution not included
Mains input surge capabilitySpecification item Value Unit ConditionSurge capability (L-N) 1 kVSurge capability (L/N-Ground) 2 kV
June 13, 2013 © 2013 Koninklijke Philips Electronics N.V. All rights reserved.LED driver 36W 0.3-1A 48V 230V Page 4 of 6
Graphs
Operating window
Power factor versus output power
Efficiency versus output power
June 13, 2013 © 2013 Koninklijke Philips Electronics N.V. All rights reserved.LED driver 36W 0.3-1A 48V 230V Page 5 of 6
Logistical dataSpecification item ValueProduct name LED driver 36W 0.3-1A 48V 230VOrder codeLogistic code 12NC 9290 008 71808EAN3Pieces per box 12
©2013 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The informationpresented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed withoutnotice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license underpatent- or other industrial or intellectual property rights. Data subject to change.
Date of release: June 13, 2013
www.philips.com/xitanium
