LED Autolamps Box, Tandem or Boat Trailer Plug in … Trailer Cable System.pdf · LED Autolamps...
Transcript of LED Autolamps Box, Tandem or Boat Trailer Plug in … Trailer Cable System.pdf · LED Autolamps...
Page No 22
LED Autolamps Box, Tandem or Boat Trailer Plug in Harness System
• Heavy Duty Water Proof Cable, Plugs and Connectors
• All Lights Compliant with ECE or ADR Road standards
• Cable plugs are IP67 rated, 100% water proof
• Rear lamps, markers and licence lamps are fully submersible
• 5 Year Warranty
Functional, Long Lasting Quality, Value for Money
Innovated Harness System The key to this system is its ease of fitting. This enables wiring of a trailer to be completed faster which is perfect for trailer manufacturers, DIY or non skilled fitters saving time and money. No cutting, no soldering, no taping and a professional finish.
FlexibilityThe system consists of individual cables for box trailers to large tandem trailers with cable lengths up to 8 metres and widths up to 2.1 metres. Boat trailer cables lengths available up to 12 metres in length. All cables have 2 core accessory plug that enable licence and marker lamps to be added if required.
Cable and PlugsThe Cables and plugs are specially designed with tinned copper terminals, special sealing plug ring and have water proof grease added for extra protection. All Cables and Plug sockets are IP67 rated ensuring a water tight fully submersible connection.
Page No 23
LED Autolamps Box, Tandem or Boat Trailer Plug in Harness System
Quality AssuredThis system has been on the market in excess of 10 years and continues to remain the popular choice for trailer manufacturers Australia wide. With a 10 year proven track record and a minimal failure rate well under 1%, you can be confident of a long lasting cabling and lighting solution.
Labour CostsDesigned specifically to be easily and quickly installed without the need to cut, splice, solder, join or tape wire joins, reducing fitting times with its simple plug in design allowing skilled or non-skilled workers to complete the install. Expect to reduce lighting assembly labour costs by up to 75%.
Licence Lamps and ConnectorsAlso available is the LP1 and 35BLM1P that have a 1 metre cable with a plug that fits into the back of the 100, 150 and 275 series lamps. The 99 and 149 have the licence plate lamp inbuilt with the 207 series licence lamps incorporated in its bracket
WarrantyFive Year Warranty when fitted as intended.
• No wiring or crimping tools required
• No cutting or splicing of wires
• No soldering of joins or connections
• No Joiners or taping required
• Professional finish
Page No 24
Cable system for trailers from 3.7 meters to 8 meters
Gooseneck to car with trailer plug
• PNo. 5C41 - 7 pin flat• PNo. 5C21 - 7 pin small round• PNo. 5C81 - 7 pin round
Lamp to gooseneck cable
• Part No. 5C370C3.7 metre
• Part No. 5C430C4.3 metre
• Part No. 5C490C4.9 metre
• Part No. 5C550C5.5 metre
• Part No. 5C610C6.1 metre
• Part No. 5C670C6.7 metre
• Part No. 5C730C7.3 metre
• Part No. 5C800C8.0 metre
Lamp to lamp cable
• Part No. 4C110C1.1 metre
• Part No.4C130C1.3 metre
• Part No. 4C150C1.5 metre
• Part No. 4C170C1.7 metre
1.9 metre• Part No. 4C190C
2.1 metre• Part No. 4C210C
• 100% waterproof
• Specially designed plugs
• No assembly tools required
Cable system for small trailers with a 5 Year Warranty
Heavy duty marker lamp cables
Part No. 2C300B3 metre
Part No. 2C400B4 metre
Part No. 2C500B5 metre
Part No. 2C200B2 metre
Part No. 2PT
T piece connector
Marker Lamp Cables and Connector
Part No. 2C100B1 metre
Wiring of a trailer can now be done quickly and easily without cutting, splicing, joining or insulating wires & cables. The cables and plugs are specially designed with tinned copper terminals and water proof grease with IP67 rated plugs and sockets ensuring a water tight connection. All main cables have accessory wires at the ends of the male plugs which are compatible with the marker lamp plug in cable system. Cabling system comprises of the following:
1. Gooseneck to lamp – this cable is fitted from the front of the trailers frame to the rear right hand lamp. The male plug to the lamp has two accessory wires for side markers.
2. Lamp to lamp – this cable is fitted from the right hand lamp to the left hand lamp. The male plug to the lamp has two accessory wires for side markers.
3. Cable with trailer plug – this 1 metre cable is fitted to the gooseneck to lamp cable, or the boat cable connector. This cable ends with a trailer plug. (7 pin flat, 7 pin round or 7 pin small round).
4. Marker lamp cable and connector – For fitting compatible marker lamps to the trailer.
5. Licence lamp cable and connector – LP1 and 35BLM1P have a 1 metre cable with a plug that fits into the back of the 100, 150 and 275 series lamps.
Page No 25
• 100% waterproof
• Specially designed plugs
• No assembly tools required
Cable system for small trailers with a 5 Year Warranty
2
4
3
5
3
1
1 Cable with trailer plug
2 Gooseneck to lamp cable (5C)
3 Marker lamp cable and connector
4 Lamp to lamp
5 Licence lamp cable and connector
100 Series 150 Series
149 Series99 Series
37 Series
58 Series 275 Series
LP135BLM1P
Plug in Cable Compatible LED Autolamps products
Available Box Cable Kits Up To 3.7 metres
Available Tandem Cable Kits Up To 5.5 metres
Part No. TK6X4LRLarge round
Part No. TK12X6LRLarge round
Part No. TK6X4SRSmall round
Part No. TK12X6SRSmall round
Part No. TK6X4FFlat
Part No. TK12X6FFlat
Page No 26
Cable system for boat trailers from 4.0 meters to 12 meters
Wiring of a trailer can now be done quickly and easily without cutting, splicing, joining or insulating wires & cables. The cables and plugs are specially designed with tinned copper terminals and water proof grease with IP67 rated plugs and sockets ensuring a water tight connection. All main cables have accessory wires at the ends of the male plugs which are compatible with the marker lamp plug in cable system. Cabling system comprises of the following:
1. Boat trailer cable - this cable connects each Individual lamp to the gooseneck area and plugs into the boat cable joiner. The male plug to the lamp has two accessory wires for side markers.
2. Boat cable connector - this three way connector joins the left and right boat trailer cables to the cable with the trailer plug.
3. Cable with trailer plug – this 1 metre cable is fitted to the gooseneck to lamp cable, or the boat cable connector. This cable ends with a trailer plug. (7 pin flat, 7 pin round or 7 pin small round).
4. Marker lamp cable and connector – For fitting compatible marker lamps to the trailer.
5. Licence lamp cable and connector – LP1 and 35BLM1P have a 1 metre cable with a plug that fits into the back of the 100 and 150 series lamps. The 99 and 149 have the licence plate lamp inbuilt with the 207 series licence lamps incorporated in its bracket.
Boat trailer cable Joiner for left/right cable at gooseneck
• Part No. BCC1
• 100% waterproof
• Specially designed plugs
• No assembly tools required
Cable system for boat trailers with a 5 Year Warranty
Gooseneck to car with trailer plug
• PNo. 5C41 - 7 pin flat• PNo. 5C21 - 7 pin small round• PNo. 5C81 - 7 pin round
Heavy duty marker lamp cables
Part No. 2C300B3 metre
Part No. 2C400B4 metre
Part No. 2C500B5 metre
Part No. 2C200B2 metre
Part No. 2PT
T piece connector
Marker Lamp Cables and Connector
Part No. 2C100B1 metre
• Part No. BC4004.0 metre
• Part No. BC6006.0 metre
• Part No. BC8008.0 metre
• Part No. BC100010.0 metre
• Part No. BC120012.0 metre
Page No 27
• 100% waterproof
• Specially designed plugs
• No assembly tools required
Cable system for boat trailers with a 5 Year Warranty
3
2
1
4
4
3
1 Cable with trailer plug
2 Boat cable connector
3 Boat trailer cable (5C)
4 Marker lamp cable and connector
100 Series
150 Series 149 Series
99 Series
207BARLP2
37 Series
58 Series
35BLM1P
Plug in Cable Compatible LED Autolamps products
Available 6 metre Cable Kits Available 8 metre Cable Kits
Part No. BTK6LRLarge round
Part No. BTK8LRLarge round
Part No. BTK6SRSmall round
Part No. BTK8SRSmall round
Part No. BTK6FFlat
Part No. BTK8FFlat