Lecture and lab schedule
description
Transcript of Lecture and lab schedule
![Page 1: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/1.jpg)
Lecture and lab scheduleLecture: GPS, remote sensing, spatial analysis and applications
Labs: 1. GPS/RS lab 2. Fire Fuel Mapping and Modeling in a
Forested Environment 3. Your lab
![Page 2: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/2.jpg)
Why GPS
Figure out where you are and where you’re going
Navigation and positioning are crucial to many activities
GPS basics
![Page 3: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/3.jpg)
• Generating mapped data for GIS databases
• “traditional” GIS analysts & data developers
• travel to field and capture location & attribute information cheaply (instead of surveying)
• Other uses (many in real time):
• 911/firefighter/police/ambulance dispatch
• car navigation
• roadside assistance
• mineral/resource exploration
![Page 4: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/4.jpg)
GPS Basics
What is GPS?
GPS stands for Global Positioning System which measures 3-D locations on Earth surface with the aid of satellites
• Created and Maintained by the US Dept. of Defense and the US Air Force • System as a whole consists of three segments
satellites (space segment) receivers (user segment) ground stations (control segment)
Note: Russia and a European consortium are implementing similar systems.
![Page 5: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/5.jpg)
Satellites
![Page 6: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/6.jpg)
How it works?
1. Triangulating
2. Distance measure
3. Getting perfect timing
4. Satellite position
![Page 7: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/7.jpg)
How It Works
1. Triangulating
Start by determining distance between a GPS satellite and your position
Adding more distance measurements to satellites narrows down your possible positions
![Page 8: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/8.jpg)
Triangulating
Three distances = two points
Intersection of Four spheres = one point
Note: • 4th measurement not needed• Used for timing purposes instead
![Page 9: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/9.jpg)
2. Distance measure
Distance between satellites and receivers
determined by timing how long it takes the signal to travel from satellite to receiver
How?
Radio signals travel at speed of light: 186,000 miles/second
Satellites and receivers generate exactly the same signal at exactly the same time
Signal travel time = delay of satellite signal relative to the receiver signal
Distance from satellite to receiver =
signal travel time * 186,000 miles/second
1sec
Receiver signal
Satellite signal
![Page 10: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/10.jpg)
How do we know that satellites and receivers generate the same signal at the same time?
satellites have atomic clocks, so we know they are accurate
Receivers don't -- so can we ensure they are exactly accurate? No!
But if the receiver's timing is off, the location in 3-D space will be off slightly...
So: Use 4th satellite to resolve any signal timing error instead
determine a correction factor using 4th satellite
3. Getting perfect timing
![Page 11: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/11.jpg)
4. Satellite position
In order to make use of the distance measurements from the satellites, we must know their exact locations such that we
can match our signals with the right satellite.
satellites are placed into high orbits -- makes their orbits very predictable
receivers have almanacs that tell them where satellites should be
minor variations in orbit are monitored -- correction factors transmitted along with the signals
![Page 12: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/12.jpg)
System as a whole consists of three segments
• satellites (space segment)• receivers (user segment)• ground stations (control segment)
![Page 13: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/13.jpg)
![Page 14: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/14.jpg)
Satellites (space segment)
24 NAVSTAR satellites
orbit the Earth every 12 hours
~11,000 miles altitude
positioned in 6 orbital planes
orbital period/planes designed to keep 4-6 above the horizon at any time
controlled by five ground stations around the globe
![Page 15: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/15.jpg)
Ground-based devices can read and interpret the radio signal from several of the NAVSTAR
satellites at once.
Use timing of radio signals to calculate position on the Earth's surface
Calculations result in varying degrees of accuracy -- depending on:
quality of the receiver
user operation of the receiver
local & atmospheric conditions
current status of system
Receivers (User Segment)
![Page 16: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/16.jpg)
Ground stations (control segment)
Five control stationsmaster station at Falcon (Schriever) AFB, Coloradomonitor satellite orbits & clocksbroadcast orbital data and clock corrections to satellites
Map from P. Dana, The Geographer's Craft Project, Dept. of Geography, U. Texas-Austin.
Ground Stations (control segment)
![Page 17: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/17.jpg)
Error Sources
Satellite errors
satellite position error
atomic clock, though very accurate, not perfect.
Atmosphere
Electro-magnetic waves travels at light speed only in vacuum.
The ionosphere and atmospheric molecules change the signal speed.
Multi-path distortion
signal may "bounce" off structures nearby before reaching receiver – the reflected signal arrives a little later.
![Page 18: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/18.jpg)
Error Sources (cont’d.)
Receiver error: Due to internal noise.
Selective Availability
intentional error introduced by the military for national security reasons
Pres. Clinton cancelled May 2, 2000.
![Page 19: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/19.jpg)
Selective Availability (SA)
![Page 20: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/20.jpg)
Error Breakdown (typical case):
satellite clock:satellite orbit:ionosphere/troposphere:multipath distortion:receiver errors:
1.5 meters2.5 meters5.5 meters0.6 meters0.3 meters
![Page 21: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/21.jpg)
GPS - Error Correction
2 Methods:Point AveragingDifferential Correction
![Page 22: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/22.jpg)
GPS - Point Averaging
AveragedLocation
•This figure shows a successive series of positions taken using a receiver kept at the same location, and then averaged
![Page 23: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/23.jpg)
Differential Correction
Any errors in a GPS signal are likely to be the same among all receivers within 300 miles of each other.
Note: differential correction can be applied in "real time" or after the fact (post-processing)
GP
S
Reference Receiver sits overPrecisely surveyed point
Error signals
![Page 24: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/24.jpg)
GPS - Differential CorrectionDifferential correction collects points using a receiver at a known location (known as a base station) while you collect points in the field at the same time (known as a rover receiver)Any errors in a GPS signal are likely to be the same among all receivers within 300 miles of each other
~ 300 miles (~ 480 km) or less
Base station (known location) Rover receiver
![Page 25: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/25.jpg)
How it works:
• use a base station at a known position base station calculate
its own position & compares to its known position
• determines correction factors that can be applied to
receiver-calculated positions
Differential correction will reduce horizontal position Error to 1 - 3 meters with standard receiver
much GPS fieldwork for GIS/mapping purposes will require differential correction!
National Differential GPS Network (NDGPS) being created
Differential correction
![Page 26: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/26.jpg)
GPS - Differential CorrectionThe base station knows its own locationIt compares this location with its location at that moment obtained using GPS satellites, and computes errorThis known error (difference in x and y coordinates) is applied to the rover receiver (hand-held unit) at the same moment
Time GPS Lat GPS Long Lat. error Long. error3:12.53:13.03:13.53:14.03:14.53:15.0
35.5035.0534.9536.0035.3535.20
79.0578.6579.5580.4579.3079.35
.5
.05-.051.0.35.20
.5-.35.551.45.30.35
Example: Base Station File
![Page 27: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/27.jpg)
L11.5 The issue of GPS datums
Datums, or so called “reference globe” in map projections, need to be defined for GPS.
The WGS 84 is defined and maintained by the US National Imagery and Mapping Agency (NIMA) as a global geodetic datum. It is the datum to which all GPS positioning information is referred by virtue of being the reference system of the broadcast GPS satellite ephemerides.
![Page 28: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/28.jpg)
Garmin’s cheapest receivers
Garmin’s iQue 3600 PDA:
http://www.garmin.com/products/iQue3600/
Garmin’s Forerunner 201: A watch that uses GPS to determine current speed, average speed, exact distance traveled, etc. ( ) Basic features also available in the Forerunner 101 ($115).
http://www.garmin.com/products/forerunner201/
![Page 29: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/29.jpg)
Garmin’s Outdoor GPS Receivers:
Etrex Legend C ($375)
“Along with the Etrex Vista C, is one of Garmin's smallest, least expensive products to combine a color TFT display and advanced GPS routing capabilities in a waterproof design.”
--is WAAS enabled
--has USB port for downloading maps from Garmin’s MapSource CD library
Etrex Vista C ($430)
--has a TFT (thin-film transistor, with 1-4 tranistors controlling each pixel; it is the highest-definition flat-panel technique) display
--WAAS enabled
--has USB port for downloading maps from Garmin’s MapSource library
![Page 30: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/30.jpg)
Choosing a GPS receiverThe 2000 Receiver Survey in the GPS World magazine lists
495 receivers from 58 manufactures (GPS World, January 2001). Why are there so many GPS receivers on the market?
- There are so many different applications of GPS
- New uses spring up every day.
Dual-frequency or single-frequency GPS receiver
(1) Smart antennas/integrated receivers – For the lower end of the accuracy requirements, handheld GPS receivers operate at the single-point accuracy level (<10 m without Selective Availability).
![Page 31: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/31.jpg)
Choosing a GPS receiver (Cont.)
Etrex from Garmin – 500 points, $145.71
12XL from Garmin –
City point database, $309.07 , area calculation
![Page 32: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/32.jpg)
Choosing a GPS receiver (Cont.)
(2)GIS/Mapping receivers - Receivers used for mapping and GIS data Collection typically requires a positioning accuracy in the range of sub-meter to a few meters.
Both (1) and (2) are single-frequency units, designed to operate in real-time. (2) are distinguished from (1) by having both a LCD display/command unit through which instructions and user-centered data is input, and a Differential GPS (DGPS) signal decoder.
(3) Dual-frequency receiver, collecting data for post-processing, has the highest accuracy, and are often used for surveying/geodetic-type applications. These are typically the most expensive class of GPS receiver.
![Page 33: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/33.jpg)
Choosing a GPS receiver (Cont.)
To meet military objectives, the department of Defense can degrade the accuracy with which positions can be determined using GPS. This can be done by:
(1) Deliberate introduction of errors in the satellite clocks, called selective availability. The government turned off SA in May 2000, which significantly improved the accuracy of civilian GPS receivers.
(2) Encrypting the measurement signals such that only military authorized users can receive them, called antispoofing.
![Page 34: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/34.jpg)
Choosing a GPS receiver (Cont.)Other sources of GPS signal errors (garmin.com)
•Ionosphere and troposphere delays — The satellite signal slows as it passes through the atmosphere. The GPS system uses a built-in model that calculates an average amount of delay to partially correct for this type of error.
•Signal multipath — This occurs when the GPS signal is reflected off objects such as tall buildings or large rock surfaces before it reaches the receiver. This increases the travel time of the signal, thereby causing errors.
![Page 35: Lecture and lab schedule](https://reader034.fdocuments.us/reader034/viewer/2022051401/56814f86550346895dbd3e50/html5/thumbnails/35.jpg)
Choosing a GPS receiver (Cont.)
•Receiver clock errors — A receiver's built-in clock is not as accurate as the atomic clocks onboard the GPS satellites. Therefore, it may have very slight timing errors. •Number of satellites visible — The more satellites a GPS receiver can "see," the better the accuracy. Buildings, terrain, electronic interference, or sometimes even dense foliage can block signal reception, causing position errors or possibly no position reading at all. GPS units typically will not work indoors, underwater or underground.