Learn how to use Shiva

STEP BY STEP

Step_1HOW TO INSTALL THE APPLIANCE

YOU CAN LEAVE ITON A COUNTER OR ONSTANDS

OR EVEN PUT ITON THE WALL

Step_1HOW TO INSTALL THE APPLIANCE

Step_2CHECKING THE VOLTAGE

THE APPLIANCE ISNOT BIVOLT!

Step_2CHECKING THE VOLTAGE

PAY ATTENTION AT THESTICKER ON THE WIRE

YOU CAN FIND THESAME INFORMATIONON THE BOX

Step_3PREPARING TO USE THE APPLIANCE

OPEN THE FRONT COVER

AT THE TOP POSITION THECOVER STAYS OPEN AND LOCKED

IF YOU WANT TO REPEAT THEPROCESS OR MAKE ANOTHERONE IN A ROW YOU CAN ADDMORE WATER IN THE RECIPIENT

Step_3PREPARING TO USE THE APPLIANCE

PUT TAP WATER IN THECONTAINER APPROXIMATELY100ml

Step_4PUTTING THE HAIR BRUSHES

INSERT THEHAIR BRUSHES INTOTHE APPLIANCE

IF YOU WANT YOU CAN ALSOPUT SOME COMBS ANDANOTHER ACESSORIES TOO.

Step_4PUTTING THE HAIR BRUSHES

THE APPLIANCE ISDESIGNED TO DISINFECTTHREE BRUSHES ON EACHCICLE

Step_5TURNING THE SHIVA ON

CLOSE THE FRONT COVER

TURN SIDE KNOB CLOCKWISEDIRECTION

Step_5TURNING THE SHIVA ON

EACH CYCLE LASTS 5 MINUTS. THE TIMERWILL AUTOMATICALLYTURN OFF IN THE END OFTHE PROCESS.

YOU´LL REALIZE THAT A RED LIGHT TURN OFF INTHE FRONT OF THE APPLIANCE

READY!THE DESINFECTION PROCESS IS DONE.

IT’S IMPORTANT TO DESINFECT THE HAIRBRUSHESALL TIMES BEFORE USE THEM. THAT HABIT AVOID

ANY DISEASES RISKS

Step_6CLEANNING THE APPLIANCE

YOU CAN CLEAN IT WITH ACLOTH OR EVEN WITH APAPER TOWEL.

IF YOU WANT YOU CAN ALSOCLEAN THE HEATER

ATENTION! YOU MUST WAITTHE RESISTANCE TO COOLDOWN. AVOID RISKS OF SKINBURN OUT

Step_6CLEANNING THE APPLIANCE

IF YOU HAVE ANY DOUBTSTAKE A LOOK AT THEHANDBOOK.

YOU MIGHT HAVETHIS DIFFERENTIALIN YOUR BEATY SALON