Leanpresentation

54
Lean Manufacturing

description

 

Transcript of Leanpresentation

Page 1: Leanpresentation

Lean Manufacturing

Page 2: Leanpresentation

Agenda

Background Toyota Production System Key Lean Techniques Advantages and Disadvantages People and Customers Economics Changes in Lean Current Lean Practices Case Studies

Page 3: Leanpresentation

Definition Lean Manufacturing – A way to eliminate

waste and improve efficiency in a manufacturing environment

Lean focuses on flow, the value stream and eliminating muda, the Japanese word for waste

Lean manufacturing is the production of goods using less of everything compared to traditional mass production: less waste, human effort, manufacturing space, investment in tools, inventory, and engineering time to develop a new product

Page 4: Leanpresentation

Lean and Just-in-Time

Lean was generated from the Just-in-time (JIT) philosophy of continuous and forced problem solving

Just-in-time is supplying customers with exactly what they want when they want it

With JIT, supplies and components are “pulled” through a system to arrive where they are needed when they are needed

Page 5: Leanpresentation

What is Waste?

Waste is anything that happens to a product that does not add value from the customer’s perspective

Products being stored, inspected or delayed, products waiting in queues, and defective products do not add value

Page 6: Leanpresentation

Seven Wastes Overproduction – producing more than the

customer orders or producing early. Inventory of any kind is usually waste.

Queues – idle time, storage, and waiting are wastes

Transportation – moving material between plants, between work centers, and handling more than once is waste

Inventory – unnecessary raw material, work-in-process (WIP), finished goods, and excess operating supplies

Motion – movement of equipment or people Overprocessing – work performed on product that

adds no value Defective product – returns, warranty claims,

rework and scrap

Page 7: Leanpresentation

Origins

Lean Manufacturing is sometimes called the Toyota Production System (TPS) because Toyota Motor Company’s Eiji Toyoda and Taiichui Ohno are given credit for its approach and innovations

Page 8: Leanpresentation

Underlying Principles to TPS Work shall be completely specified as to

content, sequence, timing, and outcome Every customer-supplier connection, both

internal and external, must be direct and specify personnel, methods, timing, and quantity of goods or services provided

Product and service flows must be simple and direct – goods and services are directed to a specific person or machine

Any improvement in the system must be made in accordance with the “scientific method” at the lowest possible level in the organization

Page 9: Leanpresentation

Toyota Production System

Since the Toyota Production System requires that activities, connections, and flow paths have built-in tests to signal problems automatically, gaps become immediately evident.

Results of the TPS are improvements in reliability, flexibility, safety, and efficiency.

These lead to increase in market share and profitability.

Page 10: Leanpresentation

Timeline

Page 11: Leanpresentation

Key Lean Manufacturing Techniques

5S

Single Minute Exchange of Dies

Kanban

Cellular Manufacturing

Page 12: Leanpresentation

5S

Strategy for creating a well organized, smoothly flowing manufacturing process

Page 13: Leanpresentation

5S Examples

Before After

Page 14: Leanpresentation

Benefits of 5S

Increases organization and efficiency

Avoids wasted motion Increases safety Eliminates unnecessary inventory Offers improvements at an

inexpensive cost

Page 15: Leanpresentation

5S Drawbacks

If not fully implemented, may result in “Jive S” Store things Stick to the rules Superficially clean Switch to new fixtures Serve reluctantly

Can not be considered an end goal – must be part of a continuous improvement movement

Page 16: Leanpresentation

Single Minute Exchange of Dies (SMED)

Method that focuses on the rapid conversion from manufacturing one product to the next

Page 17: Leanpresentation

SMED and Lean

SMED needs to be treated as a constant improvement program

Setup times can not be minimized overnight

Continuous evaluation and exploration of further improvements is absolutely necessary

Page 18: Leanpresentation

04/07/23 18

Simple CNC Example

New batch of parts arrives Change over tools for the batch Set offsets for new tools Load NC program Validate

Run parts Load part onto machine Cycle start and wait Unload and visually inspect (adjust if

necessary)

Page 19: Leanpresentation

External elements of work can be completed while the machine is still running e.g. get the next tool, get all your clamps, get lifting equipment in place, put equipment away, etc.

Internal elements of work can only be done while the machine is stopped e.g. change the tool, adjust the machine depth, sharpen a tool (which requires the machine to be stopped), etc..

Page 20: Leanpresentation

SMED Examples

Page 21: Leanpresentation

SMED Examples

Page 22: Leanpresentation

SMED Examples

Page 23: Leanpresentation

For example: A slide clamp reduced the time required to load and unload parts to fixture. 2 hold-down clamps eliminated the need to tape parts during a glue-up operation. Set slide allows quick (temporary) alignment of 2 parts.

SMED Examples

Page 24: Leanpresentation

SMED Examples

Split thread bolts Handles Toggle clamps U-shaped washers

Page 25: Leanpresentation

04/07/23 25

Make the tool part of the screw device -- you don’t need a tool, and this will save time in disassembling and reassembling the tooling and fixturing!

Page 26: Leanpresentation

04/07/23 26

Reduce the amount of turns required in order to activate the screw.

Page 27: Leanpresentation

04/07/23 27

Reduce the amount of screw turns and eliminate the tool!

Page 28: Leanpresentation

04/07/23 28

Page 29: Leanpresentation

04/07/23 29

Page 30: Leanpresentation

04/07/23 30

Page 31: Leanpresentation

Benefits of SMED

Increases throughput by reducing setup times

Eliminates setup errors Increases safety Reduces the cost of setups Reduces waiting times and inventory

buildups Decreases the required skill level of the

operators

Page 32: Leanpresentation

Kanban

A system that uses replenishment signals to simplify inventory management Signals (usually cards) hold product details

What to make, when to make it, how much to make, and where to send it

Cards stay attached to a bin that holds the product

When bin is empty, it is returned to the start of the assembly line for replenishment

Full bins are returned to the customer, and the cycle continues

Page 33: Leanpresentation

Kanban Example

Supermarket Ordering System

Page 34: Leanpresentation

Benefits of Kanban

Highly visible systems Simple, effective, and inexpensive Reduces inventory and eliminates

stock-outs Improves the quality of service Improves lead times

Page 35: Leanpresentation

Cellular Manufacturing

Dividing the manufacture of products into semi-autonomous

and multi-skilled teams known as work cells

Page 36: Leanpresentation

Cellular Manufacturing Example

Functional LayoutCellular Layout

Page 37: Leanpresentation

Benefits of Cellular Manufacturing

Simplifies material flow and management

Reduces interdepartmental travel Reduces throughput time Reduces lot sizes Simplifies scheduling

Page 38: Leanpresentation

Lean Manufacturing Advantages and Disadvantages

Advantages: Increased overall

productivity Reduced amount of

floor space required Reduced

manufacturing lead time

Improved flexibility to react to changes

Improved quality

Disadvantages: Difficulty involved with

changing processes to implement lean principals

Long term commitment required

Very risky process - expect supply chain issues while changing over to lean

Page 39: Leanpresentation

People

Transition to Lean is difficult since a company must build a culture where learning and continuous improvement are the norm.

Success of lean requires the full commitment and involvement of all employees and of the company’s suppliers.

Page 40: Leanpresentation

How People Benefit from Lean

Element Traditional Lean Improvement

Communication Slow & Uncertain Fast & Positive Quality & Coordination

Teamwork Inhibited Enhanced Effective Teams

Motivation Negative, Extrinsic Positive, Intrinsic Strong Motivation

Skill Range Narrow Broad Job Enrichment

Supervision Difficult and Fragmented

Easy & Localized Fewer Supervisors

Page 41: Leanpresentation

How Customer’s Benefit from Lean

Element Traditional Lean Improvement

Response Weeks Hours 70-90%

Customization Difficult Easy Competitive Advantage

Delivery Speed Weeks-Months Days 70-90%

Delivery Reliability

Erratic Consistent & High Up to 90%

Delivery Quantities

Large Shipments JIT as Required Locks in JIT Customers

Quality Erratic Consistent & High Delighted Customers

Page 42: Leanpresentation

House of Lean

Page 43: Leanpresentation

Economics

Reduction of Inventory Less space necessary to hold inventory

Reduced Waste Decreased Production Cost

Increased market share Able to provide what the customer wants quickly

Increased competitive advantage Faster response to the customer Lower Cost Higher Quality

Page 44: Leanpresentation

Changes in Lean since the beginning

Page 45: Leanpresentation

Inventory Comparison

Inventory Turnover – annual cost of goods sold from the income statement divided by the value of inventory from the balance sheet

Page 46: Leanpresentation

Quality Control 6 sigma process

Combination of old and new ideas 6 ingredients

Genuine focus on the customer Data- and fact-driven management Process focus, management, and improvement Proactive management Boundarlyless collaboration Drive for perfection, tolerance failure

Page 47: Leanpresentation

Lean Maintenance

Page 48: Leanpresentation

A Simultaneous Approach

Page 49: Leanpresentation

6 Tools for Lean Maintenance

Visual Controls 5S Seven Wastes Single Minute Exchange of Dies Poka-yoke Total Productive Maintenance

Page 50: Leanpresentation
Page 51: Leanpresentation

Other impacts of Lean

Bell South – service industry Management system and operations

Control Process management, work measurement,

management control, and people development Combines lean and 6 sigma

Woburn Safari Parks Feed logistics Animal Resource Planning

Page 52: Leanpresentation

Background Poli-film America Inc. a division of a German owned

company. Manufactures protective masking that prevents

abrasion and staining of exposed surfaces during manufacturing and delivery

Industries Using Material: Plastics Automotives Construction Electronics Laminates Furniture Textiles

High demand product 24/7 production

Page 53: Leanpresentation

Problems An enterprise resource planning system that

encompassed an unstable database The database was untrustworthy account of

inventory, hand counts were necessary to confirm the numbers counted by computers

Led to many employees spending many hours and led to low processing and limit of work utilization

Lack of frequency in supplies and storage – errors in production and set limits

Unable to trace items Main concern – program’s ability to adapt to

changing processes and production goals while still maintaining inventory traceability real time data with multiple distribution sites

Page 54: Leanpresentation

Results Chose a new program to implement in later 2003

Greatest impact on company’s inventory flow and order distribution

Real time traceability allowed him to cut down on the 2 mil lbs of film and other materials by more than half and maintain a sufficient safety stock for when its time to reorder and restock

Benefits through Lean Time and money has seen dramatic cuts

Instead of 20 min to fill an order, takes less than 5 min currently

Allowed company to expand for more regional coverage Been simplified for reports Reduce time taken to accomplish certain tasks and add

more responsibilities