LEAD FREE BRASS FITTINGS LEAD FREE LEAD FREEBRASS PIPE FITTINGS ELBOW 90 BARSTOCK TEE FORGED...

[email protected] 1-800-877-5391

161

LEA

D F

REE

What is the new lead-free requirement?In 2011, the Reduction of Lead in Drinking Water Act was signed into law. The Act has reduced the lead content allowed in drinking water system and plumbing materials by changing the definition of "lead-free" in Section 1417of the Safe Drinking Water Act.

The term "lead-free" has been updated from notmore that 8% lead content to mean "not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes, pipe fittings, plumbing fittings and fixtures."

Lead-Free Requirement Exemptions(A) The new requirement does not apply to pipes, pipe fit-tings, plumbing fittings, or fixtures, including backflow pre-venters, that are used exclusively for nonpotable service such as manufacturing, industrial processing, irrigation, outdoor watering or any other uses where the water is not anticipated to be used for human consumption.

(B) The new requirement does not apply to toilets, bidets, urinals, fill valves, flushometer valves, tub fillers, shower valves, service saddles or water distribution main gate valves 2 inches in diam-eter or larger.

How do I know which products must meet the new lead-free requirement?The prohibitions on use and introduction into commerce ap-ply to all pipe, pipe fittings, plumbing fittings, and fixtures (henceforth reffered to as "products"), including stocked in-ventories that have not been installed. This includes coated or uncoated brass or bronze materials. By using the flow-chart below as a guide, you can determine if a product must meet the new lead-free requirement:

LEAD FREELEAD FREE BRASS FITTINGS LEAD FREE

PRICING FILE AVAILABLE ONLINE


1

LEA

D F

REE

LEAD FREE BRASS FITTINGS

Part # Size28-001LF 1/8" 8.3328-002LF 1/4" 15.7328-003LF 3/8" 21.2628-004LF 1/2" 37.6328-005LF 3/4" 53.19


Part # Size28-039LF 3/8"x3/8"x1/4" 23.43

Part # Size28-015LF 3/8" x 1/4" 21.26

Part # Size28-018LF 1/8" 15.0928-019LF 1/4" 14.86



BRASS PIPE FITTINGS

ELBOW 90° BARSTOCK TEE FORGED

REDUCING TEE FORGED

REDUCING ELBOW FORGED

ELBOW 45°

TEE BARSTOCK

ELBOW 90° FORGED

Anderson Metals Corporation, Inc.

BrassPipe FittingsAMC FREE (Lead Free)

• One piece construction, available in barstock or forgings

• Used with brass or steel pipe

• All pipe threads are "American Standard Taper Pipe Threads"

• Fair vibration resistance

• Used in low to medium pressure applications

• Te�lon tape or pipe sealant is recommended

• Pipe threads should be tightened 2 1/2 turns past �inger tight

Brass Pipe Fittings AMC FREE (Lead Free)

Computer Nominal Weight Price Computer Nominal Weight Price Computer Nominal Weight Price

Number Size Per 100 Each Number Size Per 100 Each Number Size Per 100 Each

Female Pipe x706205- Female Pipe 706201-

Female Pipe x 0604 3/8 x 1/4 16 21.26 02 1/8 5 9.67706100- Female Pipe 04 1/4 13 18.8202 1/8 6 8.33 06 3/8 17 20.1004 1/4 13 15.73 08 1/2 28 32.33

06 3/8 17 21.26 12 3/4 52 70.0808 1/2 37 37.6312 3/4 60 53.19 Female Pipe x

706107- Female Pipe 02 1/8 3 15.0904 1/4 7 14.86

Female Pipe706206- 1 1 2 Reads Size 1-1-2060604 3/8x3/8x1/4 19 23.43

Female Pipe x706200- Female Pipe 706101-02 1/8 4 6.93 02 1/8 8 13.1104 1/4 10 13.63 04 1/4 18 24.3506 3/8 15 17.36 06 3/8 23 33.2108 1/2 24 28.37 08 1/2 46 55.2912 3/4 42 53.25 12 3/4 71 80.45

Three EndsFemale Pipe

Three EndsFemale Pipe

LF 710045 Elbow 45°

LF 7100R Reducing Elbow

Forged

LF 7100F Elbow 90°

Forged

LF 7100 Elbow 90° Barstock

LF 7101 Tee

Barstock

LF 7101F Tee

Forged

LF 7101R Reducing Tee

Forged

www.andersonmetals.com 13

Lead Free

Toll Free Phone 1-800-821-5725www.midlandmetal.com

2

LEA

D F

REE


PLA

STIC



Part # Size28-201SLF 1/8" 2.9428-202SLF 1/4" 5.0728-203SLF 3/8" 6.7828-204SLF 1/2" 10.09

Part # Size28-121LF 1/4" x 1/8" 9.4228-116LF 3/8" x 1/4" 6.5828-117LF 1/2" x 3/8" 6.0028-118LF 3/4" x 1/2" 8.68

Part # Size28-102LF 1/4" x 1/8" 4.5428-103LF 3/8" x 1/8" 5.7728-104LF 3/8" x 1/4" 4.6628-105LF 1/2" x 1/8" 10.8428-106LF 1/2" x 1/4" 10.8428-107LF 1/2" x 3/8" 7.3428-108LF 3/4" x 1/8" 24.1228-109LF 3/4" x 1/4" 18.7628-110LF 3/4" x 3/8" 16.3128-111LF 3/4" x 1/2" 12.9328-112LF 1" x 1/4" 28.3728-113LF 1" x 3/8" 26.6828-114LF 1" x 1/2" 27.5028-115LF 1" x 3/4" 23.13



Part # Size28-059EHLF 1/4" 11.65



Part # Size28-084SLF 1/8" 2.4528-085SLF 1/4" 4.2528-086SLF 3/8" 8.3928-087SLF 1/2" 11.7728-088SLF 3/4" 19.69


CROSS BARSTOCK PLUG CORED HEX HEAD

PLUG SOLID HEX HEAD

HEX BUSHING

FACE BUSHING

COUPLING

UNION

X-HEAVY COUPLING

CAP

PLUG CORED SQUARE HEAD

PLUG SOLID SQUARE HEAD

COUNTERSUNK PLUG HEX


3

LEA

D F

REE



Part # Size28-156SLF 1/8" 5.4828-157SLF 1/4" 11.7128-158SLF 3/8" 19.4028-159SLF 1/2" 28.9028-160SLF 3/4" 66.59


Part # Size28-140LF 1/8" x 1-1/2" 4.5428-141LF 1/8" x 2" 5.1328-142LF 1/8" x 2-1/2" 5.7728-143LF 1/8" x 3" 6.5828-144LF 1/4" x 1-1/2" 5.4228-145LF 1/4" x 2" 6.1228-146LF 1/4" x 2-1/2" 6.9328-147LF 1/4" x 3" 7.6928-148LF 3/8" x 1-1/2" 6.1228-149LF 3/8" x 2" 7.8128-150LF 3/8" x 2-1/2" 13.18

Part # Size28-212EHLF 1/4" 8.51

Part # Size28-211LF 1/8" 3.0928-212LF 1/4" 4.6628-213LF 3/8" 7.8128-214LF 1/2" 12.4828-215LF 3/4" 20.3928-216LF 1" 43.52

Part # Size28-220LF 1/4" x 1/8" 4.3128-221LF 3/8" x 1/8" 6.5828-222LF 3/8" x 1/4" 6.3528-223LF 1/2" x 1/8" 13.2228-224LF 1/2" x 3/8" 11.5928-225LF 3/4" x 1/2" 20.80

Part # Size28-181LF 1/4" x 1/8" 5.1328-182LF 3/8" x 1/8" 13.1128-183LF 3/8" x 1/4" 7.7528-180LF 1/2" x 1/8" 17.8828-184LF 1/2" x 1/4" 13.0528-185LF 1/2" x 3/8" 11.7128-189LF 3/4" x 1/2" 19.84

Part # Size28-190LF 1/8" x 1/8" 4.2428-191LF 1/4" x 1/8" 6.7628-192LF 1/4" x 1/4" 7.2228-198LF 3/8" x 1/8" 10.0228-193LF 3/8" x 1/4" 13.1128-194LF 3/8" x 3/8" 11.8828-199LF 1/2" x 1/4" 16.6028-195LF 1/2" x 3/8" 12.3428-196LF 1/2" x 1/2" 18.5328-208LF 3/4" x 1/2" 31.8728-209LF 3/4" x 3/4" 21.37

CLOSE NIPPLE SHORT BARSTOCK* STREET ELBOW 90°

STREET ELBOW 90°

LONG NIPPLE

LONG HEX NIPPLE

HEX NIPPLE

REDUCING HEX NIPPLE

REDUCING COUPLING

ADAPTER


BARSTOCK* ST ELBOW


REDUCING STREET ELBOWFORGED*

FORGED*

* Forged and Barstock shapes may be substituted for one an-other in Lead Free.


4

LEA

D F

REE




Part # Size28-253LF 1/8" 10.3128-254LF 1/4" 20.3928-255LF 3/8" 34.55

Part # Size28-281LF 1/8" 12.7028-282LF 1/4" 24.0028-283LF 3/8" 32.8028-284LF 1/2" 50.03

Part # Size28-290LF 1/8" 12.5028-291LF 1/4" 13.9828-292LF 3/8" 25.52



Part # Size28-266LF 1/8" 8.3428-267LF 1/4" 9.6128-268LF 3/8" 18.91

STREET ELBOW 45°

STREET TEE BARSTOCK

STREET TEE FORGED

TEE BARSTOCK

TEE FORGED

ELBOW FORGED

REDUCING ELBOW

ELBOW BARSTOCK

SAE/JIC DUAL 45°/37° FEMALE SWIVEL

MALE ADAPTER

Part # Hose I.D. x Male NPTF

30-200LF 1/4” x 1/8” 2.4530-201LF 1/4” x 1/4” 3.2930-203LF 3/8” x 1/4” 3.4030-204LF 3/8” x 3/8” 4.6430-206LF 1/2” x 3/8” 5.3530-207LF 1/2” x 1/2” 8.83

Part # Hose I.D. x Female 45°/37°

30-230LF 1/4" x 1/4" 3.37

PUSH-ON


5

LEA

D F

REE


RIGID MALE ADAPTER


32-001LF 1/8" x 1/8" 4.0232-027LF 1/8" x 1/4" 6.4732-002LF 3/16” x 1/8” 3.2032-003LF 3/16" x 1/4" 4.6632-004LF 1/4” x 1/8” 3.4432-005LF 1/4” x 1/4” 4.8932-006LF 1/4" x 3/8" 6.7032-007LF 1/4" x 1/2" 10.7832-954LF 1/4" x 3/4" 11.9232-008LF 5/16” x 1/8” 3.4432-009LF 5/16” x 1/4” 3.4432-010LF 5/16" x 3/8" 7.0532-011LF 3/8” x 1/8” 3.6132-012LF 3/8” x 1/4” 5.5932-013LF 3/8” x 3/8” 6.8732-014LF 3/8” x 1/2” 10.7832-026LF 3/8" x 3/4" 6.1032-015LF 1/2” x 1/4” 6.6432-016LF 1/2” x 3/8” 8.3932-017LF 1/2” x 1/2” 12.3532-018LF 1/2" x 3/4" 25.5232-019LF 5/8" x 3/8" 9.3832-020LF 5/8” x 1/2” 12.9932-021LF 5/8" x 3/4" 21.7332-306LF 3/4" x 3/8" 10.2632-022LF 3/4” x 1/2” 12.8732-023LF 3/4” x 3/4” 18.4732-024LF 1" x 3/4" 38.2232-025LF 1" x 1" 46.31

HOSE BARBSRIGID FEMALE ADAPTER

Part # Hose I.D. x Female NPTF

32-050LF 1/8" x 1/8" 6.4732-317LF 1/8" x 1/4" 10.6632-051LF 3/16" x 1/8" 6.8732-062LF 3/16" x 1/4" 9.2032-052LF 1/4" x 1/8" 4.8432-053LF 1/4” x 1/4” 5.7132-054LF 1/4" x 3/8" 9.0332-441LF 1/4" x 1/2" 13.3432-055LF 5/16" x 1/8" 9.0932-056LF 5/16" x 1/4" 7.2832-318LF 5/16" x 3/8" 11.5932-057LF 3/8" x 1/8" 5.7132-058LF 3/8” x 1/4” 5.9432-059LF 3/8” x 3/8” 7.8132-063LF 3/8” x 1/2” 12.7632-064LF 1/2" x 1/4" 12.4132-060LF 1/2" x 3/8" 9.1532-061LF 1/2” x 1/2” 10.9532-065LF 3/4" x 3/4" 15.42

HOSE BARB TEES

Part # Hose Barb Size32-365LF 1/4” 12.4132-366LF 5/16" 12.5332-126LF 3/8” 11.59

Part #32-101LF 1/4" x 1/4" 5.8632-105LF 3/8" x 3/8" 7.8232-100LF 1/2" x 1/2" 12.63

FEMALE 45° FLARE SWIVEL

Part # H.B. x H.B.944-142LF 1/4” 12.73944-134LF 3/8” 12.88

LEAD FREE MINI BALL VALVES BARB x BARB


Brass Hose BarbsAMC FREE (Lead Free)

• One piece, except swivels (nut and stem)

• Used with plastic tubing or rubber hose

• -40° to 200° F. temperature range

• Intended for use with hose clamp or crimp type ferrule

• Barbed edges provide positive connection

• Excellent vibration resistance

• Barb size is hose I.D.

Brass Hose Barbs AMC FREE (Lead Free)

Computer Hose I.D. Weight Price Computer Hose I.D. Weight Price Computer Hose I.D. Weight Price


707014- Barb x BarbBarb x 03 3/16 2 4.49

707001- Male Pipe 707002- Barb x Female Pipe 04 1/4 2 3.670202 1/8 x 1/8 2 4.02 0202 1/8 x 1/8 2 6.47 05 5/16 3 4.140204 1/8 x 1/4 2 6.47 0204 1/8 x 1/4 4 10.66 06 3/8 4 4.600302 3/16 x 1/8 3 3.20 0302 3/16 x 1/8 3 6.87 08 1/2 5 6.82

0304 3/16 x 1/4 2 4.66 0304 3/16 x 1/4 4 9.20 10 5/8 7 8.680402 1/4 x 1/8 2 3.44 0402 1/4 x 1/8 3 4.84 0404 1/4 x 1/4 4 4.89 0404 1/4 x 1/4 4 5.71 0406 1/4 x 3/8 6 6.70 0406 1/4 x 3/8 6 9.03 0408 1/4 x 1/2 10 10.78 0408 1/4 x 1/2 7 13.340502 5/16 x 1/8 3 3.44 0502 5/16 x 1/8 3 9.090504 5/16 x 1/4 5 5.01 0504 5/16 x 1/4 4 7.280506 5/16 x 3/8 6 7.05 0506 5/16 x 3/8 6 11.59 707020- Barb x Male Pipe0602 3/8 x 1/8 4 3.61 0604 3/8 x 1/4 5 5.94 0404 1/4 x 1/4 6 10.310604 3/8 x 1/4 5 5.59 0606 3/8 x 3/8 7 7.81 0604 3/8 x 1/4 6 9.090606 3/8 x 3/8 6 6.87 0608 3/8 x 1/2 9 12.76 0606 3/8 x 3/8 7 11.710608 3/8 x 1/2 7 10.78 0804 1/2 x 1/4 7 12.41 0608 3/8 x 1/2 8 15.960804 1/2 x 1/4 8 6.64 0806 1/2 x 3/8 8 9.15 0806 1/2 x 3/8 9 16.200806 1/2 x 3/8 8 8.39 0808 1/2 x 1/2 9 10.950808 1/2 x 1/2 11 12.350812 1/2 x 3/4 16 25.521006 5/8 x 3/8 11 9.381008 5/8 x 1/2 12 12.991012 5/8 x 3/4 17 21.731208 3/4 x 1/2 14 12.871212 3/4 x 3/4 17 18.47 Barb x 1612 1 x 3/4 21 38.22 707010- Female 45° Flare Swivel 707024- Barb x Barb x Barb1616 1 x 1 32 46.31 0404 1/4 X 1/4 3 5.86 04 1/4 7 12.41

0606 3/8 X 3/8 7 7.82 05 5/16 10 12.530808 1/2 X 1/2 11 12.63 06 3/8 13 11.59

LF 7129 LF 7129F LF 7129S

LF 7129E Elbow

LF 7129T Tee LF 7129SAE



Brass Hose BarbsAMC FREE (Lead Free)

• One piece, except swivels (nut and stem)

• Used with plastic tubing or rubber hose

• -40° to 200° F. temperature range

• Intended for use with hose clamp or crimp type ferrule

• Barbed edges provide positive connection

• Excellent vibration resistance

• Barb size is hose I.D.

Brass Hose Barbs AMC FREE (Lead Free)

Computer Hose I.D. Weight Price Computer Hose I.D. Weight Price Computer Hose I.D. Weight Price


707014- Barb x BarbBarb x 03 3/16 2 4.49

707001- Male Pipe 707002- Barb x Female Pipe 04 1/4 2 3.670202 1/8 x 1/8 2 4.02 0202 1/8 x 1/8 2 6.47 05 5/16 3 4.140204 1/8 x 1/4 2 6.47 0204 1/8 x 1/4 4 10.66 06 3/8 4 4.600302 3/16 x 1/8 3 3.20 0302 3/16 x 1/8 3 6.87 08 1/2 5 6.82

0304 3/16 x 1/4 2 4.66 0304 3/16 x 1/4 4 9.20 10 5/8 7 8.680402 1/4 x 1/8 2 3.44 0402 1/4 x 1/8 3 4.84 0404 1/4 x 1/4 4 4.89 0404 1/4 x 1/4 4 5.71 0406 1/4 x 3/8 6 6.70 0406 1/4 x 3/8 6 9.03 0408 1/4 x 1/2 10 10.78 0408 1/4 x 1/2 7 13.340502 5/16 x 1/8 3 3.44 0502 5/16 x 1/8 3 9.090504 5/16 x 1/4 5 5.01 0504 5/16 x 1/4 4 7.280506 5/16 x 3/8 6 7.05 0506 5/16 x 3/8 6 11.59 707020- Barb x Male Pipe0602 3/8 x 1/8 4 3.61 0604 3/8 x 1/4 5 5.94 0404 1/4 x 1/4 6 10.310604 3/8 x 1/4 5 5.59 0606 3/8 x 3/8 7 7.81 0604 3/8 x 1/4 6 9.090606 3/8 x 3/8 6 6.87 0608 3/8 x 1/2 9 12.76 0606 3/8 x 3/8 7 11.710608 3/8 x 1/2 7 10.78 0804 1/2 x 1/4 7 12.41 0608 3/8 x 1/2 8 15.960804 1/2 x 1/4 8 6.64 0806 1/2 x 3/8 8 9.15 0806 1/2 x 3/8 9 16.200806 1/2 x 3/8 8 8.39 0808 1/2 x 1/2 9 10.950808 1/2 x 1/2 11 12.350812 1/2 x 3/4 16 25.521006 5/8 x 3/8 11 9.381008 5/8 x 1/2 12 12.991012 5/8 x 3/4 17 21.731208 3/4 x 1/2 14 12.871212 3/4 x 3/4 17 18.47 Barb x 1612 1 x 3/4 21 38.22 707010- Female 45° Flare Swivel 707024- Barb x Barb x Barb1616 1 x 1 32 46.31 0404 1/4 X 1/4 3 5.86 04 1/4 7 12.41

0606 3/8 X 3/8 7 7.82 05 5/16 10 12.530808 1/2 X 1/2 11 12.63 06 3/8 13 11.59

LF 7129 LF 7129F LF 7129S

LF 7129E Elbow

LF 7129T Tee LF 7129SAE


Lead Free

MENDER/ SPLICER

Part # Hose I.D. x Hose I.D.

32-091LF 1/8" 2.3232-092LF 3/16" 4.4932-093LF 1/4” 3.6732-094LF 5/16" 4.1432-095LF 3/8" 4.6032-096LF 1/2” 6.8232-097LF 5/8" 8.6832-098LF 3/4" 11.05

FORGED HOSE BARB 90° ELBOW


32-038LF 1/4" x 1/8"32-039LF 1/4” x 1/4” 10.3132-309LF 1/4" x 3/8" 7.7632-036LF 5/16” x 1/8” 3.9232-040LF 5/16” x 1/4” 4.8032-046LF 3/8" x 1/8" 5.2232-041LF 3/8” x 1/4” 9.0932-042LF 3/8” x 3/8” 11.7132-047LF 3/8" x 1/2" 15.9632-048LF 1/2" x 1/4" 7.1232-043LF 1/2" x 3/8" 16.2032-311LF 1/2" x 1/2" 5.2932-313LF 3/4" x 1/2" 11.02


6

LEA

D F

REE


Part # Hose Barb x FGH

30-031LF 3/8” x 3/4" 13.4030-032LF 1/2” x 3/4" 14.4230-033LF 5/8” x 3/4" 15.0030-034LF 3/4” x 3/4" 16.02

Part # Hose Barb xMGH

30-039LF 3/8” x 3/4" 14.2130-040LF 1/2” x 3/4" 16.0230-041LF 5/8” x 3/4" 24.5330-042LF 3/4” x 3/4" 24.99

FEMALE SWIVEL ONLY

MALE END ONLY

BARSTOCK BRASS GARDEN HOSE COUPLINGS

Part # Hose Barb30-025LF 3/8” 28.3430-027LF 1/2” 31.1630-028LF 5/8” 40.2630-029LF 3/4” 41.74

GARDEN HOSE COUPLING

A

Hex

A

Hex

B

B

Part # FGH X FGH30-011LF 3/4” x 3/4” 11.5330-012LF no swivel 16.89

Part # FGH x Female NPTF

30-016LF 3/4" x 1/8" 14.1030-078LF 3/4" x 1/2" 10.1430-083LF 3/4” x 3/4” 13.92

Part # MGH XMale NPTF

30-052LF 3/4" x 1/4" 13.2130-053LF 3/4” x 3/8” 15.6730-058LF 3/4” x 1/2” 14.97

30-058SLF 3/4" x 1/2"(1/2" SWT)

14.97

30-063LF 3/4” x 3/4” x 1/2” 13.46

Part # MGH x Female NPTF

30-066LF 3/4" x 1/4" 15.6730-067LF 3/4" x 3/8" 14.8630-068LF 3/4" x 1/2" 13.4630-073LF 3/4” x 3/4” 17.82

Part # Size30-103LF 3/4” Die Cast 5.01

Part # MGH X MGH30-098LF 3/4” x 3/4” (1/2" FIP) 19.2830-099LF 3/4" x 3/4" 12.53


30-088LF 3/4” x 1/2”(1/2”SWT) 12.7030-094LF 3/4” x 3/4”(1/2” FIP) 11.36

Part # FGH x Male NPTF

30-047LF 3/4” x 1/4” 26.4530-048LF 3/4” x 3/8” 27.2630-049LF 3/4” x 1/2” 21.79

SWIVEL - FGH X FGH


30-001LF 3/4” x 1/2” 13.5730-006LF 3/4” x 3/4” 14.91

SWIVEL - FGH X FEMALE PIPE

RIGID - FGH X FEMALE PIPE RIGID - MGH X MALE PIPE

RIGID - MGH X FEMALE PIPE

GARDEN HOSE CAP

GARDEN HOSE NUT

RIGID - MGH X MGH

RIGID - FGH X MALE PIPE

SWIVEL - FGH X MALE PIPE

• WASHER INCLUDED

• WASHER INCLUDED

• WASHER INCLUDED

• WASHER INCLUDED

• WASHER INCLUDED

• WASHER INCLUDED

• WASHER INCLUDED

Part # Size30-021LF Knurled 8.4530-022LF Hex Nut 7.11

A

Hex

30-021

30-022

GARDEN HOSE

Part # SizeFGH x MGH(2)

30-140LF 3/4” 24.93

CAST BRASS HOSE - "Y" CONNECTOR

A B


7

LEA

D F

REE


Part # Thread Size UNF

10-104LF 1/8" 7.8710-105LF 3/16" 7.0610-106LF 1/4” 2.9110-107LF 5/16" 4.8410-108LF 3/8” 6.4110-118LF 3/8" x 1/4" 15.2610-109LF 1/2” 9.7310-120LF 1/2" x 1/4" 12.0610-121LF 1/2" x 3/8" 11.0110-110LF 5/8” 14.3910-122LF 5/8" x 3/8" 13.4010-123LF 5/8" x 1/2" 15.2610-111LF 3/4" 34.25


10-039LF 1/4" 4.0810-041LF 3/8” 6.2910-052LF 3/8" x 1/4" 6.8210-042LF 1/2” 8.6810-054LF 1/2" x 3/8" 9.8510-043LF 5/8" 12.4110-056LF 5/8" x 1/2" 13.2910-044LF 3/4" 18.18

SHORT FORGED NUT

SHORT ROD NUT


10-013LF 1/8" 2.9710-014LF 3/16" 1.9810-015LF 1/4" 2.2110-016LF 5/16" 3.0310-017LF 3/8” 3.9010-018LF 7/16" 14.6410-019LF 1/2” 5.4210-020LF 5/8" 7.6310-021LF 3/4" 17.13


45° S.A.E. BrassFlare FittingsAMC FREE (Lead Free)

• Two pieces construction – nut and body

• Use with copper, brass, aluminum, or steel tubing

• -40° to +250° F. temperature range

• Resists mechanical pullout

• Easy to disassemble and can be reassembled many times, with no effect on the seal

• Primary uses: fuel equipment, plumbing, gases, refrigeration, and vacuum lines

• Meet functional requirements for SAE, ASME and ASA codes for pressure piping

45° S.A.E. Brass Flare Fittings AMC FREE (Lead Free)

Computer Tube O.D. Weight Price Computer Tube O.D. Weight Price Computer Tube O.D. Weight Price


704040-704014- 704020- Threads x OD Tube 04 1/4 2 1.6902 1/8 1 2.97 0604 3/8 x 1/4 8 6.82 05 5/16 3 4.6003 3/16 1 1.98 0806 1/2 x 3/8 8 9.85 06 3/8 4 2.8504 1/4 3 2.21 1008 5/8 x 1/2 14 13.29 08 1/2 6 4.3105 5/16 4 3.03 10 5/8 11 7.3406 3/8 6 3.9008 1/2 8 5.4210 5/8 15 7.6312 3/4 23 17.13

704039-04 1/4 3 2.56 704042- Flare x Flare06 3/8 5 4.60 02 1/8 2 7.8708 1/2 9 7.05 03 3/16 3 7.06

704018- 10 5/8 13 10.72 04 1/4 4 2.9104 1/4 5 4.08 05 5/16 5 4.8406 3/8 8 6.29 06 3/8 8 6.41

08 1/2 10 8.68 08 1/2 13 9.7310 5/8 13 12.41 10 5/8 19 14.39

12 3/4 25 18.18 12 3/4 34 34.25

To Assemble: 1 Cut smooth, square end on tubing 2 Slide nut onto tube - threads facing end 3 Flare end of tube 4 Thread nut to body until snug, then

LF 76602S Short Forged Reducing Nut

LF 76401S Short Forged

Flare Nut

LF 7441S Short

Flare Nut

LF 7439 Plug

LF 7440 Cap

LF 7402 Union


Lead Free

UNION1 2

3

Part # Size (1 x 2 x 3)10-174LF 3/8" x 3/8" x 1/4" 14.5110-175LF 3/8" x 3/8" x 1/2" 18.8810-181LF 1/2" x 1/2" x 3/8" 24.4110-182LF 1/2" x 1/2" x 5/8" 31.9910-189LF 5/8" x 5/8" x 1/2" 35.19

REDUCING UNION TEE

Part # Size (1 x 2 x 3)10-157LF 1/8" 15.6310-158LF 3/16" 17.4310-159LF 1/4" 7.9210-160LF 5/16" 11.9410-161LF 3/8" 12.0010-162LF 1/2" 19.6310-163LF 5/8" 32.57

UNION TEE

CAP


10-075LF 1/4” 1.6910-076LF 5/16" 4.6010-077LF 3/8” 2.8510-078LF 1/2” 4.3110-079LF 5/8” 7.3410-080LF 3/4" 17.43


10-064LF 1/4" 13.7810-066LF 3/8" 4.6010-067LF 1/2" 7.0510-068LF 5/8" 10.72

PLUG


8

LEA

D F

REE


UNION ELBOW

FLARE X FIP TEE

Part # Flare x Flare10-406LF 1/4" 7.1710-407LF 3/8" 11.5910-409LF 1/2" 17.4810-419LF 1/2" x 3/8" 16.8410-410LF 5/8" 27.21

Part # Flare x Flare x Fe Pipe

10-434LF 1/2" x 1/2" x 1/2" 34.72

FORGED SWIVEL

Part # Female Flare UNF

10-481LF 1/4" 12.5810-482LF 5/16" 19.4410-483LF 3/8” 14.1010-484LF 1/2” 16.2010-485LF 5/8” 23.3610-487LF 3/8" x 1/4" 27.6710-488LF 1/2" x 3/8" 28.25

Part # Male Flare x Female NPTF

10-227LF 3/16" x 1/8" 6.5810-228LF 1/4" x 1/8" 3.2610-229LF 1/4" x 1/4" 3.9610-230LF 1/4" x 3/8" 8.5110-231LF 1/4" x 1/2" 13.6310-232LF 5/16" x 1/8" 4.4910-233LF 5/16" x 1/4" 6.2910-234LF 3/8" x 1/8" 8.1710-235LF 3/8" x 1/4" 4.2510-236LF 3/8” x 3/8” 6.2310-237LF 3/8” x 1/2” 7.4010-238LF 3/8" x 3/4" 12.5310-239LF 1/2" x 1/4" 8.4710-240LF 1/2” x 3/8” 7.3410-241LF 1/2” x 1/2” 8.3310-242LF 1/2” x 3/4” 23.0710-243LF 5/8" x 3/8" 14.6210-244LF 5/8" x 1/2" 9.9610-245LF 5/8" x 3/4" 14.0410-247LF 3/4" x 3/4" 32.16

FEMALE ADAPTER MALE ADAPTER

Part # Male Flare x Male NPTF

10-253LF 1/8" x 1/8" 4.2510-254LF 3/16" x 1/8" 4.4910-252LF 3/16" x 1/4" 9.8210-255LF 1/4” x 1/8” 3.1510-256LF 1/4” x 1/4” 3.85

10-256EHLF 1/4” x 1/4” 6.8710-257LF 1/4" x 3/8" 8.1010-258LF 1/4” x 1/2” 10.7210-259LF 5/16" x 1/8" 5.7110-260LF 5/16" x 1/4 5.7110-261LF 5/16" x 3/8" 7.8710-251LF 5/16" x 1/2" 22.4910-262LF 3/8” x 1/8” 6.9310-263LF 3/8” x 1/4” 5.2410-264LF 3/8” x 3/8” 6.1210-265LF 3/8” x 1/2” 8.8510-266LF 3/8" x 3/4" 14.9710-267LF 1/2" x 1/4" 10.0810-268LF 1/2” x 3/8” 7.8610-269LF 1/2” x 1/2” 9.3810-270LF 1/2” x 3/4” 14.3310-272LF 5/8" x 3/8 16.6010-273LF 5/8" x 1/2" 10.4310-274LF 5/8" x 3/4" 16.2010-275LF 3/4" x 1/2" 22.5510-276LF 3/4” x 3/4” 25.0510-278LF 7/8" x 3/4" 43.34Part # Size

10-204LF 1/4" x 1/8" 9.0810-205LF 1/4" x 1/4" 13.8110-206LF 1/4" x 3/8" 20.1410-210LF 3/8" x 1/4" 13.2010-211LF 3/8" x 3/8" 18.8810-212LF 3/8" x 1/2" 26.2010-214LF 1/2" x 3/8" 23.7410-215LF 1/2" x 1/2" 33.0310-218LF 5/8" x 1/2" 33.76

MALE BRANCH TEE

90° MALE ELBOW

FEMALE ELBOW

Part # Flare x Male Pipe

10-284LF 3/16" x 1/8" 8.7410-286LF 1/4” x 1/8” 5.4210-287LF 1/4” x 1/4” 6.0610-288LF 1/4” x 3/8” 10.3710-289LF 1/4” x 1/2” 15.8510-290LF 5/16" x 1/8" 7.4010-291LF 5/16" x 1/4 8.2110-293LF 3/8" x 1/8" 8.5110-294LF 3/8” x 1/4” 8.1010-295LF 3/8” x 3/8” 8.8010-296LF 3/8” x 1/2” 12.3510-297LF 3/8" x 3/4" 24.8210-298LF 1/2" x 1/4" 26.1610-299LF 1/2” x 3/8” 13.5210-300LF 1/2” x 1/2” 14.3910-301LF 1/2” x 3/4” 21.2610-302LF 5/8" x 3/8" 23.3610-303LF 5/8" x 1/2" 19.4010-304LF 5/8" x 3/4" 24.8210-305LF 3/4" x 1/2" 49.9310-306LF 3/4" x 3/4" 78.41

Part # Flare x Female Pipe

10-313LF 1/4” x 1/8” 8.5610-314LF 1/4” x 1/4” 11.5910-319LF 3/8” x 1/4” 10.8410-320LF 3/8” x 3/8” 10.3110-321LF 3/8” x 1/2” 13.6910-322LF 3/8" x 3/4" 21.2210-324LF 1/2” x 3/8” 14.1010-325LF 1/2” x 1/2” 15.9610-326LF 1/2” x 3/4” 19.3410-328LF 5/8" x 1/2" 25.4010-329LF 5/8" x 3/4" 23.1310-331LF 3/4" x 3/4" 8.80

FORGED ELBOW


9

LEA

D F

REE


Part # Size18-001LF 1/8" 0.2918-002LF 3/16” 0.3518-003LF 1/4” 0.3518-004LF 5/16” 0.4718-005LF 3/8” 0.4718-006LF 7/16" 1.2218-007LF 1/2” 0.7618-008LF 5/8” 1.0518-009LF 3/4" 2.1618-010LF 7/8” 2.39

Part # Size22-008LF 1/8" 1.7522-009LF 3/16" 1.5122-010LF 1/4” 0.4722-011LF 5/16” 1.0522-012LF 3/8” 0.8722-013LF 1/2” 2.2122-014LF 5/8” 3.38

Part # Size26-001LF 1/8" 4.0226-002LF 3/16" 4.1426-003LF 1/4" 3.7326-004LF 5/16" 4.6726-005LF 3/8" 5.7126-007LF 1/2" 8.8526-008LF 5/8" 10.0926-015LF 3/4" 22.3626-016LF 7/8" 44.56

Part # Size18-047LF 1/4” 1.9218-046LF 5/16 5.0718-048LF 3/8” 2.2718-049LF 1/2” 4.1418-050LF 5/8” 5.30

Part # Size18-015 1/4” 0.0718-016 5/16” 0.2418-017 3/8” 0.2118-018 1/2” 0.3118-019 5/8” 0.54

BRASS COMPRESSION FITTINGS

BRASS SLEEVE

BRASS INSERT

BRASS NUT W/ CAPTIVE SLEEVE

CAPDELRIN SLEEVE

60 260

• FERRULES

• SLEEVE

60-P61-CC N5CT


BrassCompression FittingsAMC FREE (Lead Free)

• Three piece construction- nut, sleeve (or ferrule) and body

• Use with copper, aluminum, or plastic tubing(plastic requires 60P sleeve and 61P insert)

• -40° to +250° F. temperature range

• Easy to disassemble, no �laring tool required

• Primary uses: water, gasoline, oil, and vacuum lines

Brass Compression Fittings AMC FREE (Lead Free)

Computer Weight Price Computer Weight Price Computer Tube O.D. Weight Price Number Per 100 Each Number Per 100 Each Number Size Per 100 Each

700060- Hose02 * 1/8 1 0.29 700561- I.D.03 * 3/16 1 0.35 02 * 1/8 .08 1 1.75 700261-04 * 1/4 1 0.35 03 * 3/16 .095 1 1.51 02 1/8 1 4.0205 * 5/16 1 0.47 04 * 1/4 .17 1 0.47 03 3/16 1 4.1406 * 3/8 1 0.47 05 * 5/16 .187 2 1.05 04 1/4 1 3.7307 7/16 1 1.22 06 * 3/8 .25 2 0.87 05 5/16 2 4.6708 * 1/2 1 0.76 08 * 1/2 .375 3 2.21 06 3/8 2 5.7110 * 5/8 1 1.05 10 * 5/8 .50 4 3.38 08 1/2 3 8.8512 3/4 2 2.16 * Sold in bags of 100 pcs. only 10 5/8 6 10.09

14 7/8 3 2.39 12 3/4 9 22.36* Sold in bags of 100 pcs. only 14 7/8 12 44.56

700061-02 1 0.8203 1 0.99

00560- 04 1 1.2804 * 1/4 1 05 2 1.5705 * 5/16 1 06 2 1.7506 * 3/8 1 07 3 2.56 08 * 1/2 1 08 3 2.91 10 * 5/8 1 10 6 3.67

* Sold in bags of 100 pcs. Only 12 9 8.51

14 12 9.44

SizeTube O.D.

5/8

Tube O.D.Size

3/4

7/8

1/45/163/8

7/16

Drawings Are For

- ONLY-Patterns May Vary

Identi�ication Purposes

1/2

1/83/16

To Assemble: 1 Cut smooth, square end on tubing 2 Slide nut, then sleeve onto tube. Threads must face end 3 Insert tube into �itting 4 Thread nut onto �itting until snug, then as follows:

LF 761 Brass Nut

60P Delrin Sleeve

LF 760 Brass Sleeve

LF 761P Brass Insert

LF 761SA Brass Nut

with Captive Sleeve

8 www.andersonmetals.com

Lead Free

Part # Size18-033LF 1/8" 1.2818-034LF 3/16" 0.9918-035LF 1/4" 1.2818-036LF 5/16" 1.5718-037LF 3/8" 1.7518-038LF 7/16" 2.5618-039LF 1/2" 2.9118-040LF 5/8" 3.6718-041LF 3/4" 8.5118-042LF 7/8" 9.44

BRASS NUT


10

LEA

D F

REE


• DRILLED THROUGH

M-62

62-R

Part # Size18-062LF 1/8” 4.3718-063LF 3/16” 4.4318-064LF 1/4” 5.6518-065LF 5/16” 6.9918-066LF 3/8” 8.1018-067LF 7/16" 15.4418-068LF 1/2” 12.1818-069LF 5/8” 15.6118-070LF 3/4” 32.1018-071LF 7/8” 33.15

Part # Size18-101LF 1/8” 13.9818-102LF 3/16" 12.2918-103LF 1/4” 10.9518-104LF 5/16" 14.3318-105LF 3/8” 15.4418-106LF 1/2” 25.1118-107LF 5/8” 35.1918-109LF 7/8” 86.45

Part # Size18-171LF 3/8” x 1/2”

nom.swt.6.29

Part # Comp. X Female NPT

18-142LF 1/8” x 1/8” 5.5918-143LF 3/16” x 1/8” 6.4118-144LF 3/16" x 1/4" 14.7318-145LF 1/4” x 1/8” 4.7218-146LF 1/4” x 1/4” 5.1318-147LF 1/4” x 3/8” 11.4818-148LF 1/4” x 1/2” 14.4518-149LF 5/16" x 1/8" 7.1118-150LF 5/16” x 1/4” 5.7718-151LF 5/16” x 3/8” 10.0018-152LF 3/8” x 1/8” 5.6518-153LF 3/8” x 1/4” 5.8818-154LF 3/8” x 3/8” 6.8218-155LF 3/8” x 1/2” 8.1018-156LF 3/8” x 3/4” 27.7018-157LF 1/2" x 1/4" 16.9918-158LF 1/2” x 3/8” 8.4518-159LF 1/2” x 1/2” 10.2018-160LF 1/2” x 3/4” 27.8518-161LF 5/8" x 3/8" 18.6418-162LF 5/8” x 1/2” 14.6518-163LF 5/8” x 3/4” 17.1318-164LF 3/4" x 1/2" 34.9018-165LF 3/4" x 3/4" 41.9518-167LF 7/8" x 1/2" 47.8318-166LF 7/8” x 3/4” 24.64

Part # Size18-122LF 1/8" 11.0718-123LF 3/16" 10.4318-124LF 1/4” 8.5118-125LF 5/16” 10.3118-126LF 3/8” 10.4318-127LF 1/2” 17.4218-128LF 5/8” 24.3318-129LF 3/4” 60.0718-130LF 7/8” 72.4118-135LF 3/8" x 1/4" 18.1418-136LF 1/2" x 3/8" 21.0918-137LF 5/8" x 3/8" 19.2818-138LF 5/8" x 1/2" 24.70

Part # Size ( 1 x 2 x 3 )18-114LF 1/4" x 1/4" x 1/8" 15.8318-110LF 1/4" x 1/4" x 3/8" 21.0418-115LF 3/8” x 3/8” x 1/4” 16.6018-116LF 1/2” x 1/2” x 1/4” 28.0618-117LF 1/2” x 1/2” x 3/8” 43.6318-118LF 5/8" x 5/8" x 3/8" 44.28

Part # Size18-076LF 1/4” x 1/8” 7.3418-077LF 1/4” x 3/16” 8.1618-078LF 5/16” x 1/4” 10.0818-079LF 3/8” x 1/4” 7.1118-080LF 3/8" x 5/16" 12.4118-081LF 1/2" x 3/8" 10.4918-082LF 5/8" x 3/8" 12.8718-083LF 5/8" x 1/2" 13.87

Part # Size18-066DLF 3/8" 8.1718-068DLF 1/2" 13.1818-069DLF 5/8" 15.3818-071DLF 7/8" 33.52

UNION TEE

COMP X SWEAT ADAPTER

FEMALE COUPLING

ELBOW

REDUCING TEE

REDUCING UNION

TANK UNION

64-R

65 BSE2 165C 265C

1 2

3

66

Part # Size18-154DLF 3/8" x 3/8" 8.9218-155DLF 3/8" x 1/2" 10.2718-158DLF 1/2" x 3/8" 13.9318-159DLF 1/2" x 1/2" 14.1818-162DLF 5/8" x 1/2" 14.78

TANK COUPLING

• DRILLED THROUGH

COMP X FIP


11

LEA

D F

REE


Part # Size18-176LF 1/8” x 1/8” 3.4418-177LF 3/16” x 1/8” 3.6118-178LF 3/16” x 1/4” 7.5718-179LF 1/4” x 1/8” 4.0218-180LF 1/4” x 1/4” 4.9518-181LF 1/4” x 3/8” 1.4718-182LF 1/4” x 1/2” 10.3118-183LF 5/16” x 1/8” 4.8918-184LF 5/16” x 1/4” 5.5318-185LF 5/16" x 3/8" 10.7818-186LF 5/16" x 1/2" 29.6518-187LF 3/8” x 1/8” 5.6518-188LF 3/8” x 1/4” 5.7118-189LF 3/8” x 3/8” 7.1118-190LF 3/8” x 1/2” 9.4418-191LF 3/8” x 3/4” 13.8118-192LF 7/16” x 1/4” 14.5118-204LF 7/16" x 3/8" 13.5718-193LF 1/2” x 1/4” 8.3918-194LF 1/2” x 3/8” 8.6818-195LF 1/2” x 1/2” 11.3618-196LF 1/2” x 3/4” 15.3218-197LF 5/8” x 3/8” 12.0018-198LF 5/8” x 1/2” 12.4118-199LF 5/8” x 3/4” 15.8518-200LF 3/4" x 1/2" 39.0918-201LF 3/4” x 3/4” 23.0718-202LF 7/8” x 1/2” 36.3518-203LF 7/8” x 3/4” 23.5418-205LF 7/8" x 1" 46.24

Part # Size18-177TLF 3/16" x 1/8" 6.3618-208LF 1/4" x 1/8" 7.1118-209LF 1/4" x 1/4" 7.7718-210LF 3/8" x 1/4" 7.0618-211LF 3/8" x 3/8" 9.1718-212LF 3/8" x 1/2" 10.1718-213LF 1/2" x 3/8" 10.9718-214LF 1/2" x 1/2" 11.5218-215LF 5/8" x 1/2" 12.27

Part # Size18-273LF 3/16" x 1/8" 14.7418-274LF 1/4” x 1/8” 11.7118-275LF 1/4” x 1/4” 14.3918-276LF 5/16" x 1/8" 22.6918-277LF 5/16" x 1/4" 23.8518-279LF 3/8" x 1/4" 21.7918-280LF 3/8” x 3/8” 22.2018-281LF 1/2” x 3/8” 27.10

Part # Size18-251LF 1/8" x 1/8" 14.6818-252LF 3/16" x 1/8" 11.4818-253LF 1/4” x 1/8” 11.4818-254LF 1/4” x 1/4” 11.3018-267LF 1/4” x 3/8” 19.8918-268LF 1/4" x 1/2" 23.3018-255LF 5/16" x 1/8" 13.1818-256LF 5/16" x 1/4" 15.9818-257LF 3/8" x 1/8" 12.8218-258LF 3/8" x 1/4" 12.4718-259LF 3/8” x 3/8” 12.4718-260LF 3/8” x 1/2” 13.4618-250LF 3/8" x 3/4" 29.8618-262LF 1/2” x 3/8” 23.1918-263LF 1/2” x 1/2” 25.8718-269LF 5/8" x 3/8" 40.1118-264LF 5/8” x 1/2” 33.0318-265LF 5/8" x 3/4" 35.57

MALE ADAPTER

TANK CONNECTOR

MALE RUN TEE

FEMALE ELBOW

69 269C BSE1 169C

• DRILLED THROUGH

COMP X MIP

COMP X MIP

COMP X FIP

COMPRESSION X MIP

Part # Size18-220LF 1/8" x 1/8" 6.3518-221LF 3/16” x 1/8” 6.5218-223LF 3/16" x 1/4" 9.5018-224LF 1/4" x 1/8" 5.8318-225LF 1/4” x 1/4” 6.9918-226LF 1/4" X 3/8" 11.7118-227LF 1/4” x 1/2” 17.1918-228LF 5/16” x 1/8” 7.3418-229LF 5/16” x 1/4” 8.5618-230LF 5/16" x 3/8" 14.1618-232LF 3/8” x 1/8” 13.4618-233LF 3/8” x 1/4” 8.0418-234LF 3/8” x 3/8” 9.8518-235LF 3/8” x 1/2” 13.1118-248LF 3/8" x 3/4" 28.7618-247LF 7/16" x 1/4" 22.3918-236LF 1/2” x 1/4” 13.7518-237LF 1/2” x 3/8” 12.8218-238LF 1/2” x 1/2” 16.0818-239LF 1/2” x 3/4” 33.0918-240LF 5/8” x 3/8” 19.1718-241LF 5/8” x 1/2” 19.8118-242LF 5/8” x 3/4” 29.3618-243LF 3/4" x 1/2" 38.5118-245LF 3/4" x 3/4" 59.7718-246LF 7/8” x 3/4” 53.36

ELBOW

COMP X MIP

Part # Size18-330LF 1/4" x 1/8" 12.5218-336LF 1/4" x 1/4" 15.5818-333LF 3/8" x 1/4" 16.1818-338LF 3/8" x 3/8" 26.3018-334LF 1/2" x 3/8" 19.7418-339LF 1/2" x 1/2" 39.9818-335LF 5/8" x 1/2" 41.23

45° ELBOW

COMP X MIP


12

LEA

D F

REE


Part # Size18-289LF 1/8" x 1/8" 20.8918-290LF 3/16" x 1/8" 14.8818-291LF 1/4” x 1/8” 11.6518-292LF 1/4” x 1/4” 15.7918-293LF 5/16" x 1/8" 14.5618-294LF 5/16" x 1/4" 20.6218-295LF 3/8" x 1/8" 18.2418-296LF 3/8" x 1/4" 13.5718-297LF 3/8” x 3/8” 21.3218-299LF 1/2” x 3/8” 23.4018-300LF 1/2” x 1/2” 30.7018-301LF 5/8” x 1/2” 34.0218-303LF 3/4" x 3/4" 80.01

Part # Size18-502LF 1/4" x 1/4" 7.72

Part # Size18-503LF 1/4" x 1/4" 7.16

Part # Size18-510LF 9/16-24 x 3/8 10.08

Part # Size30-055LF 3/8" x 3/4" 16.15

Part # Size18-500LF 3/8" x 1/4" 7.5718-501LF 1/2" x 3/8" 23.54

Part # Size30-050LF 3/4" x 1/4" 19.8830-051LF 3/4" x 3/8" 20.85

Part # Size18-307LF 1/4" x 1/8 x 1/8" 23.45

Part # Size18-315LF 1/4" x 1/4" x 1/4" 21.94

Part # Size18-325LF 3/8” x 1/8” 22.0818-322LF 3/8” x 1/4” 24.6018-323LF 3/8” x 3/8” 35.0218-327LF 5/8" x 1/8" 50.04

MALE BRANCH TEE FEMALE ADAPTER

MALE ADAPTER

FEMALE ADAPTER (GASKET)

SWIVEL ELBOW



TEE

TEE

FEMALE BRANCH TEE

COMP X MIP

COMP X FIP X MIP

FIP X MIP X COMP

COMP X FIP

COMP X FE GARDEN HOSE SWIVEL

• NO NUT & SLEEVE

FE GARDEN HOSE X COMPRESSION

FEMALE FLARE X COMPRESSION

FEMALE COMPRESSION X COMPRESSION

COMPRESSION X MALE FLARE

COMPRESSION X FEMALE FLARE

3/8 3/8

3/8

3/83/8

1/4

LEAD FREE DISHWASHER TEESCOMP X COMP X SWIVEL FE

COMPRESSION

Part # Male & Fem. compression x Male

Comp935044LF 3/8 x 1/4 20.63935045LF 3/8 x 3/8 20.63

• For adding a water line• Ice makers, Coffe makers and instant

hot water systems

• NSF Approved


13

LEA

D F

REE


• 1/4 Tube O.D.

COMP X MALE PIPE-ANGLE

Part # Comp x Male Pipe

46-011LF 1/4” x 1/8” 13.8746-012LF 1/4” x 1/4” 35.7146-013LF 5/16" x 1/8" 24.8846-015LF 3/8" x 1/8" 28.4946-016LF 3/8" x 1/4" 34.95

COMP X COMP

Part # Comp x Comp46-021LF 1/4” 19.3446-022LF 5/16" 36.5946-023LF 3/8” 23.77

COMP X MALE PIPE

Part # Comp x Male Pipe

46-002LF 1/4" x 1/8" 18.8246-003LF 1/4” x 1/4” 23.7146-005LF 3/8” x 1/4” 33.03

FLARE X FLARE

Part # Comp x Comp46-045LF 1/4" 22.3146-046LF 3/8" 28.60

MALE X FEMALE PIPE

Part # Female x Male46-060LF 1/8" x 1/8" 17.9446-061LF 1/4” x 1/4” 28.43

FEMALE PIPE X FEMALE PIPE

Part # Female x Female46-055LF 1/8" x 1/8" 21.0346-056LF 1/4” x 1/4” 27.03

FLARE X MALE PIPE VALVE WITH TEE

VALVE WITH SADDLE FITSUP TO 3/4" PIPE

BRASS SADDLE

Part # Male FlareX Male Pipe

46-029LF 1/4” x 1/4” 36.47

Part # Size46-175LF 1/4" x 3/8" 34.8246-177LF 1/4" x 5/8" 59.7746-174LF 3/8" x 3/8" 46.04

Part # Size46-091LF 1/4" 34.8446-092LF 5/16" 41.8346-093LF 3/8" 47.29

Part # Size46-099LF 1/8" 22.36

B

A

Part # Male PipeX Male Pipe

46-051LF 1/4” 25.52

MALE PIPE TO MALE PIPE

B

A

SELF PIERCING NEEDLE VALVE KIT #M-104-VSP• INDIVIDUALLY BAGGED WITH NEEDLE

VALVE•SADDLE CLAMP• 2 NUTS• 2 BOLTS & WASHERSHas brass sleeve for copper tube installation

& delrin

SELF PIERCING SADDLE VALVES

Part #46-090ALF Solid Pin 25.1746-090HLF Hollow Pin 19.68


14

LEA

D F

REE


Part # Size31-126LF 3/8"31-127LF 1/2"

Part # Size31-188LF 3/8" x 1/4" 12.4231-189LF 3/8" x 3/8" 9.3731-190LF 3/8" x 1/2" 12.8331-194LF 1/2" x 3/8" 10.4731-195LF 1/2" x 1/2" 11.2731-198LF 5/8" x 1/2" 20.89


Part # Size31-137LF 5/8" x 3/8"

Part # Size31-171LF 3/8" x 5/8" O.D

(1/2 Nom. Sweat)9.17

Part # Size31-233LF 3/8" x 1/4" 11.9731-234LF 3/8" x 3/8" 12.1231-235LF 3/8" x 1/2" 16.9831-237LF 1/2" x 3/8" 17.4331-238LF 1/2" x 1/2" 18.89

Part # Size31-260LF 3/8" x 1/2" 17.48

ELBOW

CONNECTOR

FEMALE COUPLING

REDUCING ELBOW

COMP X SWEAT ADAPTER

ELBOW

ELBOW

NICKEL PLATED COMPRESSION FITTINGS


Part # Size31-079LF 3/8” x 1/4” 11.3731-081LF 1/2” x 3/8” 11.9231-082LF 5/8” x 3/8” 14.2831-083LF 5/8” x 1/2” 17.84

Part # Size31-066LF 3/8" 11.5731-068LF 1/2" 17.38

Part # Size31-105LF 3/8" 27.9031-106LF 1/2" 30.21

NUT

REDUCING UNION

UNION

TEE

ICE-MAKER WATER SUPPLY KIT• Economy• 25’ Polyethylene Tubing• Self Piercing Saddle Valve• 1/4” Compression Union• 1/4” Inserts & Sleeves

Part #43-266LF 13.53

Ice Maker KitsICE MAKER WATER SUPPLY KIT

with Poly Tubing

• Lead free fittings• Bag with Header Card• 25’ 1/4” O.D. Polyethylene Tubing - 979215

• Self Piercing Saddle Valve• 1/4” O.D. Compression x 1/8” MIP Elbow & Adapter

• 1/4” O.D. Compression Union• 1/4” Inserts & Sleeves

Part # Description43-265LF Kit 18.23979-215 1/4" OD, 25' Tube 7.53


1

LEA

D F

REE


Part # x 3/8 Compression List746436 LF 3/8 Female Iron Pipe 8.42746437 LF 1/2 Nominal Pex x 1/4 Comp. 9.26746438 LF 1/2 Nominal Pex 9.39746446 LF 1/2 Pemale Iron Pipe 7.86746456 LF 5/8 Compression 8.96

746457 LF 5/8 CompressionContractor Pack bagged less 3/8" Nut & Ferrule

7.76

746466 LF 1/2 Nominal Sweat 8.76746467 LF 1/2 Socket CPVC 11.32

Part # x 3/8 Compression List746506 LF 3/8 Compression 8.56746536 LF 3/8 Female Iron Pipe 8.76746537 LF 1/2 Nominal Pex x 1/4 Comp. 9.52746538 LF 1/2 Nominal Pex 9.66746546 LF 1/2 Female Iron Pipe 8.76746556 LF 5/8 Compression 9.46746566 LF 1/2 Nominal Sweat 9.16746567 LF 1/2 Socket CPVC 11.79

Part # Description List

746439 LF 5/8 Compression x 3/8 Compression x 1/4 Compression 13.99

746440 LF 5/8 Compression x 3/8 Compression x 3/8 Compression 14.35

ANGLE STOPS

STRAIGHT STOPS

3 WAY STOPS

LEAD FREEAB1953/S.152

Compliant

SUPPLY STOPS - 1/4 TURN CONNECTORS• 100% Pressure Leak Tested• High Performance Teflon Seats• Individually Boxed• Conventional Oval Handle Design• Meets or Exceeds ASME A112.18.1

• Marine Grade Stainless Steel Braid• Precision 12 Point Crimp• Heavy duty Brass Inserts

• Chloramine/ Chlorine ResistantInner Liner

Meets S.3874/ Public Law No. 111-380 Reduction of Lead in Drinking Water Act

3/8 COMPRESSION X 3/8 COMPRESSIONPart # Length List

922012 12" 3.93922016 16" 4.46922020 20" 5.00922030 30" 6.33922036 36" 7.13

922112 12" 4.56922116 16" 5.13922120 20" 5.66922130 30" 6.99922136 36" 7.89

923209 9" 3.76923212 12" 4.00923216 16" 4.53923220 20" 5.03

923509 9" 4.73923512 16" 5.09923520 20" 6.26

922412 12" 5.43922416 16" 5.96922420 20" 6.49922430 30" 7.83922436 36" 8.62

LAVATORY

BALLCOCK

3/8 COMPRESSION X 1/2 FEMALE IRON PIPE

1/2 FEMALE IRON PIPE X 1/2 FEMALE IRON PIPE

3/8"

5/8"

1/4" or 3/8"

3/8 COMPRESSION X 7/8 BALLCOCK

1/2 FEMALE IRON PIPE X 7/8 BALLCOCK


2

LEA

D F

REE


Part # Length List923112 12" 4.66923124 24" 6.59923196 96" 18.25

Part # L List922712 12" 14.12922718 18" 15.52922724 24" 17.02

924115 12" 15.82924118 18" 17.05924124 24" 19.41

922048 48" 10.62922060 60" 13.82922072 72" 15.95922096 96" 20.21

Part # L List923648 48" 13.32923660 60" 16.52923672 72" 18.65923684 84" 20.78

923936 36" 12.15923948 48" 14.62923960 60" 17.02923972 72" 20.01

924248 48" 16.75924260 60" 19.81924272 72" 21.61924284 84" 23.28924297 120" 30.94

WASHING MACHINE

ICE MAKER WATER HEATER

DISHWASHER

LEAD FREEAB1953/S.152

Compliant

• Marine Grade Stainless Steel Braid• Precision 12 Point Crimp• Heavy duty Brass Inserts• Chloramine/ Chlorine ResistantInner Liner

Meets S.3874/ Public Law No. 111-380 Reduction of Lead in Drinking Water Act

• 100% Pressure Leak Tested• High Performance Teflon Seats

• Individually Boxed• Conventional Oval Handle Design

• Meets or Exceeds ASME A112.18.1

922812 12" 17.22922818 18" 18.61922824 24" 20.01

922912 12" 13.25922918 18" 14.85922924 24" 16.02

1/4 COMPRESSION X 1/4 COMPRESSION

3/8 COMPRESSION X 3/8 COMPRESSION

3/8 COMPRESSION X 3/8 MALE IRON PIPE ELBOW

3/8 COMPRESSION X 3/4 FEMALE GARDEN HOSE ELBOW

3/4 FEMALE GARDEN HOSE X 3/4 FEMALE GARDEN HOSE

STAINLESS STEEL CONNECTORS



3/4 MALE IRON PIPE X 3/4 FEMALE IRON PIPE

3/4 FEMALE IRON PIPE X 3/4 FEMALE IRON PIPE

LEAD FREE BRASS FITTINGS LEAD FREE LEAD FREEBRASS PIPE FITTINGS ELBOW 90 BARSTOCK TEE FORGED...

Documents

Transcript of LEAD FREE BRASS FITTINGS LEAD FREE LEAD FREEBRASS PIPE FITTINGS ELBOW 90 BARSTOCK TEE FORGED...