Antenna Systems & Supplies Company 931 Albion Ave

Schaumburg, Illinois 60193 Phone: 847-584-1000 Fax: 847-584-9951

www.antennasystems.com

PART NUMBER: LDF4.5-NMNM-100 LENGTH: 100 FEET / 30.48 METERS CONNECTORS: N-MALE & N-MALE ON EACH SIDE

(N-Male Connector) (N-Male Connector)

N-Male Connectors have the threads on the inside and a male pin. LDF4.5-50 DESCRIPTION TYPE NO.STANDARD CABLE 5/8” STANDARD CABLE, STANDARD JACKET LDF4.5-50 FIRE RETARDANT CABLE 5/8” FIRE RETARDANT JACKET (CATVX) LDF4.5RN-50 5/8” FIRE RETARDANT JACKET (CATVR) LDF4.5RN-50 LOW VSWR AND SPECIALIZED CABLES 5/8” LOW VSWR, SPECIFY OPERATING BAND LDF4.5P-50

THREADS ON INSIDE

MALE PINMALE PIN

THREADS ON INSIDE

Antenna Systems & Supplies Company 931 Albion Ave

Schaumburg, Illinois 60193 Phone: 847-584-1000 Fax: 847-584-9951

www.antennasystems.com

CHARACTERISTIC ELECTRICAL IMPEDANCE, OHMS 50 +/- 1 MAXIMUM FREQUENCY GHZ 6.1 VELOCITY, PERCENT 89 PEAK POWER RATING, KW 62 DC RESISTANCE, OHMS/1000FT ( 1000 M) INNER 0.15 (0.49) OUTER 0.42 (1.37) DC BREAKDOWN, VOLTS 5000 JACKET SPARK, VOLTS RMS 8000 CAPACITANCE PF/FT (M) 23.2 (76.1) INDUCTANCE µH/FT (M) 0.057 (0.187 MECHANICAL OUTER CONDUCTOR COPPER INNER CONDUCTOR COPPER-CLAD ALUMINUM DIAMETER OVER JACKET, IN (MM) 0.865 (21.97) DIAMETER OVER COPPER OUTER CONDUCTOR, IN (MM) 0.777 (19.74) DIAMETER INNER CONDUCTOR, IN (MM) 0.227 (7.04) MINIMUM BENDING RADIUS, IN (MM) 8 (200) NUMBER OF BENDS, MINIMUM (TYPICAL) 15 ( 40) BENDING MOMENT, LB-FT (N- M) 2.8 (3.8) CABLE WEIGHT, LB/FT (KG/MM) 0.27 (0.402) TENSILE STRENGTH, LB (KG) 800 (363) Flat plate crush strength, lb/in (kg/mm) 70 (1.3)

Antenna Systems & Supplies Company 931 Albion Ave

Schaumburg, Illinois 60193 Phone: 847-584-1000 Fax: 847-584-9951

www.antennasystems.com

FREQUENCY

MHZ ATTENUATION

DB/100 FT ATTENUATION

DB/100 M AVERAGE

POWER, KW 0.5 0.032 0.105 62.0 1 0.045 0.149 53.5

1.5 0.056 0.183 43.6 2 0.064 0.211 37.7

10 0.145 0.476 16.7 20 0.207 0.678 11.8 30 0.254 0.834 9.57 50 0.330 1.08 7.36 88 0.443 1.45 5.49 100 0.473 1.55 5.14 108 0.493 1.62 4.93 150 0.586 1.92 4.15 174 0.633 2.08 3.84 200 0.682 2.24 3.57 300 0.847 2.78 2.87 400 0.989 3.24 2.46 450 1.05 3.46 2.31 500 1.12 3.66 2.18 512 1.13 3.71 2.15 600 1.23 4.05 1.97 700 1.34 4.41 1.81 800 1.45 4.75 1.68 824 1.47 4.83 1.65 894 1.54 5.05 1.58 960 1.60 5.26 1.52

1000 1.84 5.38 1.48 1250 1.86 6.11 1.31 1500 2.07 6.78 1.18 1700 2.22 7.29 1.10 1800 2.30 7.54 1.06 2000 2.44 802 0.996 2100 2.51 8.25 0.968 2200 2.58 8.48 0.942 2300 2.65 8.70 0.918 3000 3.11 10.2 0.783 3400 3.35 11.0 0.726 4000 3.70 12.1 0.658 5000 4.25 13.9 0.573 6000 4.76 15.6 0.511 6100 4.81 15.8 0.506