The Supplied Accessoris

I-II

Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom

(M4 X L16) (M4 X L14)

Cleaning Cloth Stand Screw X 4 Stand Screw X 3

Stand

Installing Batteries in the Remote Control

LCD TVQUICK SETUP GUIDE

English - 1

BN68-02287T-01

BN68-02287T-Eng.indd 2 2009-05-25 �� 6:06:42

Installing the Stand

Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models (32inch models) only.

Step 1. Attach your LCD TV to the stand.Two or more people should carry the TV.Make sure to distinguish between the front and back of the stand when assembling them.To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV.

Step 2. Fasten two screws at position 1 and then fasten two screw at position 2.Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side.

Using the remote control buttons

I-II

MENU ButtonDisplay the main on-screen menu.

ENTERE / DIRECTION ButtonMove the cursor and select an

item. Select the currently selected item. Confirm the setting.

RETURN ButtonReturn to the previous menu.

EXITExit the on-screen menu.

N

NNN

N

English - 2

Front

Back

2

1

Preset Step 1 Step 2

(M4 X L14) (M4 X L16)

BN68-02287T-Eng.indd 3 2009-05-25 �� 6:06:43

English - 3

Plug & PlayWhen the TV is initially powered on, basic settings proceed automatically and subsequently.If you want to reset this feature, press the MENU button to display menu.You can set the Plug & Play by selecting Setup → Plug & Play.

On the screen, you can set as follows.The each step may vary depending on the Antenna source.N

Step 1 Step 2Plug & Play

Select the OSD Language.

Menu Language : English

U Move E Enter

▲

NederlandsEnglishEesti

▼

Plug & Play

Select 'Home Use' when installing this TV in your home.

L Move E Enter

Store Demo Home Use

Plug & Play

Select Country.

Country : English

U Move E Enter

▲

SwitzerlandUnited KingdomCIS

▼

Plug & Play

Select the Antenna source to memorise.

U Move E Enter m Skip

Start

Start

Air

Cable

Plug & Play

Select the Channel source to memorise.

U Move E Enter m Skip

Start

Start

Start

Digital & Analogue

Digital

Analogue

Plug & Play

Auto Store in progress.

Digital Channels : 5 Analogue Channels : 6

E Enter m Skip

Stop

Frequency 113 MHz

15%

Plug & Play

Set the Clock Mode.

Clock Mode : Auto

U Move E Enter m Skip

AutoManual

Plug & Play

How to get the best perfotmance from your new HDTVStep 1. Connect the HD Source Unit to the TV using the Component video (Red, Green,

Blue) and audio (Red, White) cables or HDMI Cable.

Step 2. Press the Source button on the Remote Control to select HDMI or Component Input.

Depending on your location, HD programs may also be viewd using an RF antenna.

For more detalls, please refer to HD Connections in the Owner Manual.

E Enter

HD Cable

Component Cable

▼ HD box ▼ TV rear view

Plug & Play

Enjoy your TV.

OK

Step 3

Step 4 Step 5 Step 6

Step 7 Step 8 Step 9

I-II

BN68-02287T-Eng.indd 4 2009-05-25 �� 6:06:44

English -4

Connecting a AV device

WY R

WY R

R GB

WR

WR

R GB

HD connection

DVD / Blu-Ray player / Cable Box / Satellite receiver (STB)

Using a DVI Cable

AUDIO OUTDVI OUT

HD connection

DVD / Blu-Ray player / HD Cable Box / HD Satellite receiver (STB)

Using an HDMI Cable

HDMI OUT

Audio/Video connection

VCR

Using an Audio/Video Cable

AUDIO OUTVIDEO OUT

Component connection

DVD / Blu-Ray player / Cable Box / Satellite receiver

Using a Component Cable

AUDIO OUT COMPONENT OUT

HDMI/DVI

PC/COMPONENT

EXT/VIDEO

Best

Norm

al

VCR / DVD

Using a Scart Cable

EXT

BN68-02287T-Eng.indd 1 2009-05-25 �� 6:06:41