BALLAST CATALOG - ideadigitalcontent.com · • Ballast shall have a Lamp Current Crest Factor of
Lawrence Factor Catalog
Transcript of Lawrence Factor Catalog
Contact Us
Lawrence Factor, Inc. 4740 157 StreetNWMiami Lakes, Florida 33014
Phone: 305 430-0550 or 800 338-5493Fax: 305 430-0864Email: [email protected]
General Information
Agreement Upon Access: When accessing catalog and web pages ofLawrence Factor or New Parts, you agree to all the terms herein. Do notcontinue if you do not agree:
Information: This web site (the “Catalog” or “Site”) has been preparedonly for the purpose of providing general information to the public. ThisCatalog or Site is provided “as is” with no representation or warranty ofany kind, either expressed or implied, having been made as to thecompleteness, accuracy or reliability of the information in this Catalogor Site. You expressly acknowledge that this Catalog or Site may containincomplete information, errors, or it may be outdated. The informationherein is furnished for informational use only, is subject to changewithout notice, and should not be construed as a commitment byLawrence Factor, Inc (“L-Factor”). L-Factor assumes no responsibilityfor any errors or inaccuracies that may appear. L-Factor reserves theexclusive right to add, delete or modify any information in the Catalogand Web pages or withdraw the access to the pages at any time anddisclaims any duty to update any information contained herein.
Damages In Use of Catalog or Site: L-Factor shall not under anycircumstances be liable for any direct, consequential, incidental,secondary or special damages or lost profits whether resulting from theuse or inability to use this Catalog or Site, and you hereby waive releaseany such claim. Furthermore, L-Factor does not warrant or representthat its' Site or the server are free of defects, errors or viruses.
Ownership: The contents of the Catalog and Web pages are fully ownedby L-Factor. Reproduction, modifications, transfer or distribution of thecontents of the pages, entirely or partially, in any form without priorwritten permission of L-Factor is prohibited.
Suitability For Use: L-Factor has no control over the use of any productand therefore expects the user to exercise good judgment as to theproper selection, installation, use and maintenance of any product. L-Factor assumes no responsibility for damage or injury of any kind due tomisuse or improper application of any way by any person.
Aftermarket Use: X-pendable filter cartridges, New Parts compressorparts, and many other items depicted in the pages are intended andsold for aftermarket use only. Part numbers, graphics, photos, tradenames, and corresponding printed matter are not intended to implythat any items in this Catalog or Site are original brand products.Although the quality of most of the items listed herein equals orexceeds the performance of the original brand, none of these items aremanufactured for/ by or associated with the original manufacturer. L-Factor in no way represents itself or it's products to be related to theOEM or their brands.
Pricing and Charges
Prices are in U.S. dollars and subject to change without notice. Pricesmay vary for orders beyond and Canada. All sales are C.O.D. orUSprepaid by American Express, Visa or MasterCard thus saving the C.O.D.fee.
Payment: All sales are C.O.D. or prepaid by Visa or MasterCard (thussaving the C.O.D. fee). Non-Sufficient Fund Checks: $25.00 charge percheck will be assessed. A second check will incur an additionalNSF$10.00 charge and result in future orders that are prepaid or C.O.D.cash only.
Shipping
You may request your preferred method of shipping when placingorders. Should you not specify a method, L-Factor will ship via the mostsuitable method for your area. Once products are delivered to thecarrier - the shipment is considered delivered to the customer and wedecline any responsibility from that point on. Claims for damage orshortage must be made immediately with the carrier. If a shipment isrefused or returned, all incurred shipping charges will be billed to thecustomer. All shipments are Free On Board ("F.O.B.") our Miami Lakesplant. Delivery to carrier constitutes delivery to the purchaser. Claimsfor damage in transit must be placed within 10 days of receipt ofproduct
Lawrence Factor, Inc.® does it's best to process orders the samebusiness day if received before noon ( ). Orders received after noonEST( ) are processed the next business day. Upgrading the shippingESTmethod only reduces the time your order is in transit. It does not speedup the process time. All orders are shipped Monday through Friday,excluding holidays.
Oversea delivery is available. Please note - delivery times vary. Youmust contact the carrier to check their delivery commitment forspecific locations.
Orders addressed to an , , or a P.O. Box will be sent via UnitedAPO FPOStates Postal Service. Next Day Service is not available.
Methods Offered:
UPS - United Parcel Service:- All shipments are insured & traceable.- Saturday delivery is available at an additional charge ( Only).US- C.O.D. is available in some areas ( Only).US
There is an additional fee for this service.
Red = next business dayBlue = 2 business daysOrange = 3 business daysGround = 3 or more business days
FedEx - Federal Express:- All shipments insured and traceable.- Saturday delivery is available at an additional charge ( Only).US- C.O.D. is available in some areas ( Only).US
There is an additional fee for this service.
Next Day = next business daySecond Day = 2 business daysThree Day = 3 business days
FedEx Ground - Federal Express Ground:- All shipments insured and traceable.- C.O.D. available in some areas ( Only).US
FedEx Ground = 3 or more business days
USPS - United States Postal Service:- Uninsurable.- No traceability.- L-Factor is not responsible for losses.
Express = next business day
TERMS
www.Lawrence-Factor.com 05/2015 - Page 1
Priority = 2 to 3 business daysAir Mail = 4 or more business days
Back Orders
L-Factor tries its best to ship all orders complete. Should an item be onback order, it will be shipped as soon as possible using the same termsand shipping methods as the original order unless specified.
Returns
We are confident that you will be satisfied with our product. But in theevent you need to return your merchandise, at our discretion, we willoffer you an exchange or a refund for the cost of the product. (Note:Shipping costs will not be refunded.) Lawrence Factor reserves the rightto charge a re-stocking fee of up to 25%, at our discretion. Non-stock orspecial order items may not be eligible for return. Simply pack theproduct in its original packing material and enclose a copy of theinvoice with the item(s) you are returning circled. Please contact us viaemail or call us Monday - Friday 8:00 a.m. to 5:00 p.m. at 305 430-0550for return authorization and instructions.
Limits of Liability
Liability is limited to refund or replacement of purchased item(s) only.
Product Warranty
Lawrence Factor warrants to the original purchaser or our products®
that those products will be free from manufacturing defects in materialand workmanship for a period of 90 days from the date of originalpurchase. During this period, Lawrence Factor will, at its option,®
perform repairs or replace the defective product free of charge, or willrefund the purchase price.
This warranty does not apply to normal wear and tear, abuse, neglect,unreasonable use, mistreatment, failure to follow the productinstructions, or consequential damage. Modification or repair made byanyone not authorized by Lawrence Factor will void this warranty.®
This warranty and remedies set forth above are exclusive and in lieu ofall others, whether oral or written, expressed or implied. No LawrenceFactor dealer, agent, or employee is authorized to make any®
modification, extension, or addition to this warranty. Lawrence Factor,Inc. is not responsible for special, incidental, indirect or consequential®
damages resulting from any breach of warranty, or under any otherlegal theory, including but not limited to loss of profits, downtime,goodwill, damage to or replacement of equipment and property, andany costs of procurement of substitute goods, technology, or services.
Copyrights & Trademarks
The information contained within this Catalog or Website pages are theproperty of Lawrence Factor, Inc under the protection of copyrightUSlaw. No part of this book may be reproduced in any form or by anymeans, electronic or otherwise, without the written permission ofLawrence Factor, Incorporated.
Lawrence Factor Trademarks: Aero Lube, -Cop, Lab on Locale,COL.F.W., L-Factor, Monoxycon, New Parts, Oxy Lube, Seco Lube,
Vaporshell, X-tractor and High Purity At High Pressure are TRADEMARKSof Lawrence Factor, Incorporated. X-pendable, X-zam, and LawrenceFactor are of Lawrence Factor, Incorporated.REGISTERED TRADEMARKS
Registered Trade Names: A2 is a registered trademark of AmericanLAAssociation for Laboratory Accreditation. Aero Dri is a registeredtrademark of Kiko, Incorporated. Air Dry is a registered trademark ofJoslyn Sunbank Company d/b/a Air Dry Co. of America, AmericanLLCBristol is a registered trademark of American Bristol, Industries. isANDIa registered trademark of American Nitrox Divers, Incorporated. BauerCompressors is a registered trademark of Bauer Compressors,Incorporated & Bauer Kompressoren, . Bristol Pneumatics is aGMBHregistered trademark of Bristol Pneumatics, Limited. C.G.A. is aregistered trademark of Compressed Gas Association, Incorporated.C.S.A. is a registered trademark of Canadian Standards Association.Coltri-Sub is a registered trademark of Aerotecnica Coltri, Incorporated.Deltech and Del-Monox is a registered trademark of DeltechEngeneering, Incorporated. Eagle Compressors is a registered trademarkof Eagle Compressors, Incorporated. Fluid Concepts is a registeredtrademark of Fluid Concepts, Incorporated. Hamworthy is a registeredtrademark of Hamworthy , Incorporated and HamworthyUSAEngeneering, Limited. Ingersoll-Rand is a registered trademark ofIngersoll-Rand, Company. Innerspace Research is a registered trademarkof Innerspace Research, Incorporated. Jordair is a registered trademarkof Jordair Compressors, Incorporated. Mako Compressors is a registeredtrademark of CompAir Mako, Incorporated. Max-Air is a registeredtrademark of Max-Air Compressors, Incorporated. Midland DivingEquipment is a registered trademark of Midland Diving Equipment,Limited. N.A.V.S.E.A. is a registered trademark of Naval Sea SystemsCommand. N.F.P.A. is a registered trademark of National Fire ProtectionAssociation. Nautica is a registered trademark of Nautica, Incorporated.O.S.H.A. is a registered trademark of Occupational Safety and HealthAdministration. Poseidon Compressors is a registered trademark ofPoseidon Kompressoren & Bauer Compressors Inc. PressureGEMSBHSystem is a registered trademark of Pressure System, Incorporated.Robbins Aviation is a registered trademark of Robbins Aviation,Incorporated. DESIGNATED TRADEMARKS ARE THE PROPERTY OF THEIRRESPECTIVE OWNERS.
Lawrence Factor, Inc. is affiliated with the ’s listed above inNOT OEMany way, nor do any of the ’s sponsor or approve LawrenceOEMFactor® products. Use of Lawrence Factor® parts in any of theoriginal products may/will void the warranty.OEM
Aftermarket Use
X-pendable filter cartridges, New Parts compressor parts, and manyother items depicted in the pages are intended and sold foraftermarket use only. Part numbers, graphics, photos, trade names,and corresponding printed matter are not intended to imply that anyitems in this Catalog (or Websites) are original brand ( ) products.OEMAlthough the quality of most of the items listed herein equals orexceeds the performance of the original brand, none of these itemsare manufactured or associated with, sponsored by, approved by, norendorsed by the original manufacturer. Lawrence Factor in no wayrepresents itself or it's products to be related to the or theirOEMbrands.
WARNING OEM: Use of Lawrence Factor products in the ’s equipmentcould void the original warranty.
Lawrence Factor®, 4790 157 Street, Miami Lakes, Florida 33014NW© Copyright - Lawrence Factor, Inc. All Rights Reserved
TERMS
Page 2 - 05/2015 Products That Purify High PSI Air & Gas
Priority = 2 to 3 business daysAir Mail = 4 or more business days
Back Orders
L-Factor tries its best to ship all orders complete. Should an item be on back order, it will be shipped as soon as possible using the same terms and shipping methods as the original order unless specified.
Returns
We are confident that you will be satisfied with our product. But in the event you need to return your merchandise, at our discretion, we will offer you an exchange or a refund for the cost of the product. (Note: Shipping costs will not be refunded.) Lawrence Factor reserves the right to charge a re-stocking fee of up to 25%, at our discretion. Non-stock or special order items may not be eligible for return. Simply pack the product in its original packing material and enclose a copy of the invoice with the item(s) you are returning circled. Please contact us via email or call us Monday - Friday 8:00 a.m. to 5:00 p.m. at 305 430-0550 for return authorization and instructions.
Limits of Liability
Liability is limited to refund or replacement of purchased item(s) only.
Product Warranty
®Lawrence Factor warrants to the original purchaser or our products that those products will be free from manufacturing defects in material and workmanship for a period of 90 days from the date of original
®purchase. During this period, Lawrence Factor will, at its option, perform repairs or replace the defective product free of charge, or will refund the purchase price.
This warranty does not apply to normal wear and tear, abuse, neglect, unreasonable use, mistreatment, failure to follow the product instructions, or consequential damage. Modification or repair made by
®anyone not authorized by Lawrence Factor will void this warranty.
This warranty and remedies set forth above are exclusive and in lieu of all others, whether oral or written, expressed or implied. No Lawrence
®Factor dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. Lawrence Factor,
®Inc. is not responsible for special, incidental, indirect or consequential damages resulting from any breach of warranty, or under any other legal theory, including but not limited to loss of profits, downtime, goodwill, damage to or replacement of equipment and property, and any costs of procurement of substitute goods, technology, or services.
Copyrights & Trademarks
The information contained within this Catalog or Website pages are the property of Lawrence Factor, Inc under the protection of US copyright law. No part of this book may be reproduced in any form or by any means, electronic or otherwise, without the written permission of Lawrence Factor, Incorporated.
Lawrence Factor Trademarks: Aero Lube, CO-Cop, Lab on Locale, L.F.W., L-Factor, Monoxycon, New Parts, Oxy Lube, Seco Lube,
Vaporshell, X-tractor and High Purity At High Pressure are TRADEMARKS of Lawrence Factor, Incorporated. X-pendable, X-zam, and Lawrence Factor are REGISTERED TRADEMARKS of Lawrence Factor, Incorporated.
Registered Trade Names: A2LA is a registered trademark of American Association for Laboratory Accreditation. Aero Dri is a registered trademark of Kiko, Incorporated. Air Dry is a registered trademark of Joslyn Sunbank Company LLC d/b/a Air Dry Co. of America, American Bristol is a registered trademark of American Bristol, Industries. ANDI is a registered trademark of American Nitrox Divers, Incorporated. Bauer Compressors is a registered trademark of Bauer Compressors, Incorporated & Bauer Kompressoren, GMBH. Bristol Pneumatics is a registered trademark of Bristol Pneumatics, Limited. C.G.A. is a registered trademark of Compressed Gas Association, Incorporated. C.S.A. is a registered trademark of Canadian Standards Association. Coltri-Sub is a registered trademark of Aerotecnica Coltri, Incorporated. Deltech and Del-Monox is a registered trademark of Deltech Engeneering, Incorporated. Eagle Compressors is a registered trademark of Eagle Compressors, Incorporated. Fluid Concepts is a registered trademark of Fluid Concepts, Incorporated. Hamworthy is a registered trademark of Hamworthy USA, Incorporated and Hamworthy Engeneering, Limited. Ingersoll-Rand is a registered trademark of Ingersoll-Rand, Company. Innerspace Research is a registered trademark of Innerspace Research, Incorporated. Jordair is a registered trademark of Jordair Compressors, Incorporated. Mako Compressors is a registered trademark of CompAir Mako, Incorporated. Max-Air is a registered trademark of Max-Air Compressors, Incorporated. Midland Diving Equipment is a registered trademark of Midland Diving Equipment, Limited. N.A.V.S.E.A. is a registered trademark of Naval Sea Systems Command. N.F.P.A. is a registered trademark of National Fire Protection Association. Nautica is a registered trademark of Nautica, Incorporated. O.S.H.A. is a registered trademark of Occupational Safety and Health Administration. Poseidon Compressors is a registered trademark of Poseidon Kompressoren GEMSBH & Bauer Compressors Inc. Pressure System is a registered trademark of Pressure System, Incorporated. Robbins Aviation is a registered trademark of Robbins Aviation, Incorporated. DESIGNATED TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.
Lawrence Factor, Inc. is NOT affiliated with the OEM’s listed above in any way, nor do any of the OEM’s sponsor or approve Lawrence Factor® products. Use of Lawrence Factor® parts in any of the original OEM products may/will void the warranty.
Aftermarket Use
X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
Lawrence Factor®, 4790 NW 157 Street, Miami Lakes, Florida 33014© Copyright - Lawrence Factor, Inc. All Rights Reserved
IntroductionTerms . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Table of Contents . . . . . . . . . . . . . . . . . 3-4
Introduction. . . . . . . . . . . . . . . . . . . . . 6-7
Air / Gas Analysis . . . . . . . . . . . . . . . . . 9-14
Purifiers . . . . . . . . . . . . . . . . . . . . . 15-21
Cartridge Holders . . . . . . . . . . . . . . . . 22-23
Filters . . . . . . . . . . . . . . . . . . . . . . . 25-42
Service Items . . . . . . . . . . . . . . . . . . 43-50
Purity Agents. . . . . . . . . . . . . . . . . . . 51-56
Compressor Parts . . . . . . . . . . . . . . . 57-138
Glossary . . . . . . . . . . . . . . . . . . . . 139-146Cross Reference Guide . . . . . . . . . . . 147-159
Air / Gas AnalysisTechnical Articles & Info . . . . . . . . . . . . 9-10
ProgramsAmbient Air . . . . . . . . . . . . . . . . . . . . . 11
Diving / Scuba . . . . . . . . . . . . . . . . . . . . 11
European Standard . . . . . . . . . . . . . . . . . 11
Fire Fighting / SCBA . . . . . . . . . . . . . . . . 11
Fire Fighting / SCBA + Dive . . . . . . . . . . . . 12
Health Care Facilities . . . . . . . . . . . . . . . 12
Industrial . . . . . . . . . . . . . . . . . . . . . . . 12
Industrial Breathing Air . . . . . . . . . . . . . . 12
Industrial Compressed Air . . . . . . . . . . . . . 12
Miscellaneous
CO-PRO (Personal CO Protection) . . . . . . . . 13
Lab On Locale . . . . . . . . . . . . . . . . . . . . 13
X-zam Order Form . . . . . . . . . . . . . . . . . 14
Purifiers & Cartridge HoldersTechnical Articles & Info . . . . . . . . . . . . 15-16
CNG Dryers. . . . . . . . . . . . . . . . . . . . . . 17Economy Purifiers. . . . . . . . . . . . . . . . . . 18
Hyper Purifiers . . . . . . . . . . . . . . . . . 18-19
Standard Purifiers. . . . . . . . . . . . . . . . 20-21Adsorbent Cartridge Holder . . . . . . . . . . . . 22
Duplex Cartridge Holder . . . . . . . . . . . . . . 22
Mechanical Cartridge Holder . . . . . . . . . . . 23
Micronic Particle Filter Holder . . . . . . . . . . 23
Filters To Fit Major BrandsTechnical Articles & Info . . . . . . . . . . . . 25-26
Aero Dri® / Keco® / Gannon® . . . . . . . . . . 27
Air Dry® Corp. of America . . . . . . . . . . 27-28
Alkin®. . . . . . . . . . . . . . . . . . . . . . . . . 28
Allied Air Products® . . . . . . . . . . . . . . . . 28
Alta Robbins® . . . . . . . . . . . . . . . . . . . . 29 American Bristol Ind.® /Scott® . . . . . . . . 29-30
Bauer Compressors® . . . . . . . . . . . . . . 30-32
Bristol Pneumatics® . . . . . . . . . . . . . . . . 32
Coltri Sub® / Max Air® / Nuvair® . . . . . . 32-33
Deltech® . . . . . . . . . . . . . . . . . . . . . . . 33
Deltech® / Del-Monox® . . . . . . . . . . . . . . 33
Eagle Compressors® . . . . . . . . . . . . . . 34-35
Fluid Concepts®. . . . . . . . . . . . . . . . . . . 36
Hamworthy England® . . . . . . . . . . . . . . . 36
Ingersoll-Rand® . . . . . . . . . . . . . . . . . . . 36
Jordair® . . . . . . . . . . . . . . . . . . . . . 37-38
L & W Compressor® . . . . . . . . . . . . . . . . 38
Lawrence Factor® . . . . . . . . . . . . . . . 38-41
Mako Compressors® / Comp Air® . . . . . . . . 41
Midland Diving Equipment® . . . . . . . . . . . . 42
Nardi® . . . . . . . . . . . . . . . . . . . . . . . . 42
North American® . . . . . . . . . . . . . . . . . . 42
Schifauer & Pek® . . . . . . . . . . . . . . . . . . 42
Service ItemsTechnical Articles & Info . . . . . . . . . . . . . . 43
Bleed & Flow Valves . . . . . . . . . . . . . . . . 44
Check Valves . . . . . . . . . . . . . . . . . . . . . 44
Cylinder Charging . . . . . . . . . . . . . . . . 44-45
Fittings . . . . . . . . . . . . . . . . . . . . . . . . 45
Gauges . . . . . . . . . . . . . . . . . . . . . . . . 45
Hoses & Tubing . . . . . . . . . . . . . . . . . 45-46
Indicators. . . . . . . . . . . . . . . . . . . . . . . 46
Manifolds . . . . . . . . . . . . . . . . . . . . . . . 46
Priority Valves . . . . . . . . . . . . . . . . . . . . 46
Relief Valves . . . . . . . . . . . . . . . . . . . . . 47Bleed & Flow Valve Kits . . . . . . . . . . . . . . 47
Cartridge Holder Kits . . . . . . . . . . . . . . 47-48
Check Valve Kits. . . . . . . . . . . . . . . . . . . 49
Indicator Kits . . . . . . . . . . . . . . . . . . . . 49
In-Line Filter Holder Kits. . . . . . . . . . . . . . 49
Priority Valve Kits . . . . . . . . . . . . . . . . . . 49
Relief Valve Kits . . . . . . . . . . . . . . . . . 49-50
Purity AgentsTechnical Articles & Info . . . . . . . . . . . . 51-52
Adsorbents . . . . . . . . . . . . . . . . . . . . . . 53
Catalysts . . . . . . . . . . . . . . . . . . . . . . . 53Desiccants . . . . . . . . . . . . . . . . . . . . 53-54
Lubricants & Solvents . . . . . . . . . . . . . 54-56
TABLE OF CONTENTS
www.Lawrence-Factor.com 05/2015 - Page 3
Particulate Pads . . . . . . . . . . . . . . . . . . . 56
Compressor Parts To Fit Major BrandsTechnical Articles & Info . . . . . . . . . . . . 57-58
Bauer Compressors®
Auto Condensate Drain. . . . . . . . . . . . . 59-60
Bearings . . . . . . . . . . . . . . . . . . . . . 60-62
Belts. . . . . . . . . . . . . . . . . . . . . . . . . . 62
Control Valves . . . . . . . . . . . . . . . . . . 62-63
Cooling System / Heat Exchangers / Fans. . 64-66
Cylinders . . . . . . . . . . . . . . . . . . . . . . . 66
Electrical Components . . . . . . . . . . . . . 66-67
Fasteners . . . . . . . . . . . . . . . . . . . . . 67-73
Filter Intake . . . . . . . . . . . . . . . . . . . . . 74
Filter - Interstage . . . . . . . . . . . . . . . . 74-75
Gaskets / Seals / O-rings . . . . . . . . . . . 75-90
Gauges . . . . . . . . . . . . . . . . . . . . . . 90-91
Kit - ACD . . . . . . . . . . . . . . . . . . . . . . . 91
Kit - Bearing . . . . . . . . . . . . . . . . . . . 91-92
Kit - Gasket . . . . . . . . . . . . . . . . . . . 92-94
Kit - Master. . . . . . . . . . . . . . . . . . . . 94-95
Kit - Miscellaneous . . . . . . . . . . . . . . . . . 95
Kit - Piston Ring . . . . . . . . . . . . . . . . . 95-97
Kit - Valve . . . . . . . . . . . . . . . . . . . . 97-98
Lube System . . . . . . . . . . . . . . . . . . . 98-99
Piston Rings. . . . . . . . . . . . . . . . . . . 99-101
Pistons . . . . . . . . . . . . . . . . . . . . . 102-103
Plumbing / Pipe / Hose / Fittings . . . . . 103-105
Specialty Tools / Tech Supplies . . . . . . 105-107
Valve Heads . . . . . . . . . . . . . . . . . . 107-108
Valves . . . . . . . . . . . . . . . . . . . . . 109-112
Ingersoll-Rand®
Auto Condensate Drain . . . . . . . . . . . . . . 112
Gaskets / Seals / O-rings . . . . . . . . . . 113-115
Kit - Gasket. . . . . . . . . . . . . . . . . . . . . 115
Piston Rings. . . . . . . . . . . . . . . . . . . . . 115
Running Gear / Crankshafts / Con-Rods . 115-116
North American®
Filter - Intake . . . . . . . . . . . . . . . . . . . 116
Poseidon®
Cooling System / Heat Exchangers / Fans . . . 116
Fasteners . . . . . . . . . . . . . . . . . . . 116-117
Gaskets / Seals / O-rings. . . . . . . . . . . . . 117
Kit Ring . . . . . . . . . . . . . . . . . . . . . . . 117
Kit - Valve. . . . . . . . . . . . . . . . . . . . . . 118
Piston Rings. . . . . . . . . . . . . . . . . . . . . 118
Pistons. . . . . . . . . . . . . . . . . . . . . . . . 119
Valves . . . . . . . . . . . . . . . . . . . . . . . . 119
Reavell®
Bearings . . . . . . . . . . . . . . . . . . . . 119-120
Control Valves . . . . . . . . . . . . . . . . 120-121
Cooling System / Heat Exchanger / Fans . . . 121
Electrical Components . . . . . . . . . . . . . . 121
Fasteners . . . . . . . . . . . . . . . . . . . 121-123
Filter - Intake . . . . . . . . . . . . . . . . . . . 123
Gaskets / Seals / O-rings . . . . . . . . . . 123-127
Gauges . . . . . . . . . . . . . . . . . . . . . 127-128
Kit - Bearing . . . . . . . . . . . . . . . . . . . . 128
Kit - Gasket. . . . . . . . . . . . . . . . . . . . . 128
Kit - Ring . . . . . . . . . . . . . . . . . . . . . . 128
Kit - Valve. . . . . . . . . . . . . . . . . . . . . . 128
Piston Rings. . . . . . . . . . . . . . . . . . . . . 129
Pistons. . . . . . . . . . . . . . . . . . . . . . . . 129
Running Gear / Crankshafts / Con-Rods . 129-130
Specialty Tools / Tech Supplies . . . . . . . . . 130
Valve Heads. . . . . . . . . . . . . . . . . . . . . 130
Valves . . . . . . . . . . . . . . . . . . . . . 130-131
Technical Supplies
ACD . . . . . . . . . . . . . . . . . . . . . . . 131-132
Control Valves . . . . . . . . . . . . . . . . 132-133
Electrical Components . . . . . . . . . . . . . . 134
Filter - Intake . . . . . . . . . . . . . . . . . . . 134
Filter - Interstage . . . . . . . . . . . . . . . . . 134
Gauges . . . . . . . . . . . . . . . . . . . . . 134-135
Kit - ACD . . . . . . . . . . . . . . . . . . . . 135-136
Plumbing / Pipe / Hose / Fittings. . . . . . . . 136
Specialty Tools / Tech Supplies . . . . . . 136-138
Miscellaneous
Glossary . . . . . . . . . . . . . . . . . . . . 139-146
Cross Reference Guide . . . . . . . . . . . 147-159
TABLE OF CONTENTS
Page 4 - 05/2015 Products That Purify High PSI Air & Gas
Lubricants & Solvents . . . . . . . . . . . . . 56-57
Particulate Pads . . . . . . . . . . . . . . . . . . . 58
Compressor Parts To Fit Major BrandsTechnical Articles & Info . . . . . . . . . . . . 59-60
Bauer Compressors®
Auto Condensate Drain. . . . . . . . . . . . . 61-62
Bearings . . . . . . . . . . . . . . . . . . . . . 62-64
Belts. . . . . . . . . . . . . . . . . . . . . . . . . . 64
Control Valves . . . . . . . . . . . . . . . . . . 64-65
Cooling System / Heat Exchangers / Fans. . 66-68
Cylinders . . . . . . . . . . . . . . . . . . . . . . . 68
Electrical Components . . . . . . . . . . . . . 68-69
Fasteners . . . . . . . . . . . . . . . . . . . . . 69-75
Filter Intake . . . . . . . . . . . . . . . . . . . . . 76
Filter - Interstage . . . . . . . . . . . . . . . . 76-77
Gaskets / Seals / O-rings . . . . . . . . . . . 77-92
Gauges . . . . . . . . . . . . . . . . . . . . . . 92-93
Kit - ACD . . . . . . . . . . . . . . . . . . . . . . . 93
Kit - Bearing . . . . . . . . . . . . . . . . . . . 93-94
Kit - Gasket . . . . . . . . . . . . . . . . . . . 94-95
Kit - Master. . . . . . . . . . . . . . . . . . . . 96-97
Kit - Miscellaneous . . . . . . . . . . . . . . . . . 97
Kit - Piston Ring . . . . . . . . . . . . . . . . . 97-99
Kit - Valve. . . . . . . . . . . . . . . . . . . . 99-100
Lube System. . . . . . . . . . . . . . . . . . 100-101
Piston Rings . . . . . . . . . . . . . . . . . . 101-103
Pistons . . . . . . . . . . . . . . . . . . . . . 104-105
Plumbing / Pipe / Hose / Fittings . . . . . 105-107
Specialty Tools / Tech Supplies . . . . . . 107-109
Valve Heads . . . . . . . . . . . . . . . . . . 109-110
Valves . . . . . . . . . . . . . . . . . . . . . 111-114
Ingersoll-Rand®
Auto Condensate Drain . . . . . . . . . . . . . . 114
Gaskets / Seals / O-rings . . . . . . . . . . 115-117
Kit - Gasket. . . . . . . . . . . . . . . . . . . . . 117
Piston Rings. . . . . . . . . . . . . . . . . . . . . 117
Running Gear / Crankshafts / Con-Rods . 117-118
North American®
Filter - Intake . . . . . . . . . . . . . . . . . . . 118
Poseidon®
Cooling System / Heat Exchangers / Fans . . . 118
Fasteners . . . . . . . . . . . . . . . . . . . 118-119
Gaskets / Seals / O-rings. . . . . . . . . . . . . 119
Kit Ring . . . . . . . . . . . . . . . . . . . . . . . 119
Kit - Valve. . . . . . . . . . . . . . . . . . . . . . 120
Piston Rings. . . . . . . . . . . . . . . . . . . . . 120
Pistons. . . . . . . . . . . . . . . . . . . . . . . . 121
Valves . . . . . . . . . . . . . . . . . . . . . . . . 121
Reavell®
Bearings . . . . . . . . . . . . . . . . . . . . 121-122
Control Valves . . . . . . . . . . . . . . . . 122-123
Cooling System / Heat Exchanger / Fans . . . 123
Electrical Components . . . . . . . . . . . . . . 123
Fasteners . . . . . . . . . . . . . . . . . . . 123-125
Filter - Intake . . . . . . . . . . . . . . . . . . . 125
Gaskets / Seals / O-rings . . . . . . . . . . 125-129
Gauges . . . . . . . . . . . . . . . . . . . . . 129-130
Kit - Bearing . . . . . . . . . . . . . . . . . . . . 130
Kit - Gasket. . . . . . . . . . . . . . . . . . . . . 130
Kit - Ring . . . . . . . . . . . . . . . . . . . . . . 130
Kit - Valve. . . . . . . . . . . . . . . . . . . . . . 130
Piston Rings. . . . . . . . . . . . . . . . . . . . . 131
Pistons. . . . . . . . . . . . . . . . . . . . . . . . 131
Running Gear / Crankshafts / Con-Rods . 131-132
Specialty Tools / Tech Supplies . . . . . . . . . 132
Valve Heads. . . . . . . . . . . . . . . . . . . . . 132
Valves . . . . . . . . . . . . . . . . . . . . . 132-133
Technical Supplies
ACD . . . . . . . . . . . . . . . . . . . . . . . 133-134
Control Valves . . . . . . . . . . . . . . . . 134-135
Electrical Components . . . . . . . . . . . . . . 136
Filter - Intake . . . . . . . . . . . . . . . . . . . 136
Filter - Interstage . . . . . . . . . . . . . . . . . 136
Gauges . . . . . . . . . . . . . . . . . . . . . 136-137
Kit - ACD . . . . . . . . . . . . . . . . . . . 1137-138
Plumbing / Pipe / Hose / Fittings. . . . . . . . 138
Specialty Tools / Tech Supplies . . . . . . 138-140
Miscellaneous
Glossary . . . . . . . . . . . . . . . . . . . . 141-148
Cross Reference Guide . . . . . . . . . . . 149-161
ABOUT LAWRENCE FACTOR
The origins of our company are rooted deeply in the field
of high-pressure gases, founded in 1979 with the Flask
refillable filter cartridge for scuba diving. Since that time,
and through decades of technical advancement, Lawrence
Factor has become one of the most recognized names in
breathing-air. But our expertise doesn’t end there. Our
purification products are found in a multitude of
applications.
To name a few:
Ÿ CNGV Refueling Stations
Ÿ Aeronautical / Space Exploration
Ÿ Scientific Laboratories
Ÿ Missile Guidance Systems
Still whenever you see a breathing mask, be it in a
hazardous environment, entering the scene of a fire, or
plunging deep beneath the sea . . . think Lawrence Factor,
the company that puts Pure Breathing Air into that mask.
THE PEOPLE AT LAWRENCE FACTOR
Since our founding, we have earned a reputation for
quality, innovation, fair pricing, and homespun customer
service. How do we do it?
Dedicating ourselves to achieving these goals every day.
Ÿ The satisfaction of our customers.
Ÿ The advancement of our products.
Located on a two acre manufacturing campus, we house an ISO accredited research lab, a fully fitted CNC machining
facility and a streamlined assembly floor. But most likely it is our people that achieve the greatest accomplishments.
It’s a customer service staff that lives to see smiles beam through the phone and it’s the individuals who craft our
products determined to see perfection in every detail.
ABOUT OUR PRODUCTS
The slogan “High Purity At High Pressure” perfectly sums up the theme in our products. Whether a filter cartridge or a
length of stainless-steel tubing, every product in this catalog was designed for use with highly compressed and highly
purified gases. The theme doesn’t end with that, however. Behind the brand name on each package lies a product with
a reputation for high quality . . . a reputation earned on an unending quest for dependable engineering, stout
construction, and creative ideas. We know that more than just our reputation relies on these factors; your safety does!
You Have Made The Right Choice With Lawrence Factor High Purity Products
Front view of our 4790 building in Miami Lakes, FL.
Front view of our 4740 building in Miami Lakes, FL.
Air / Gas AnalysisŸ Fully Accredited
Ÿ Easy To Use Sample Kit Affordable
Ÿ Great Customer Service
Ÿ Knowledgeable Tech Support
Hi-PSI Accessories
Ÿ High Quality At Affordable Price
Ÿ Huge Inventory
Ÿ Rebuilt & Service Kits Available
Ÿ In Stock & Ready To Ship
Hi-PSI Compressor Parts
Ÿ Manufactured To Hi-Standards
Ÿ Easy To Use Kits Available
Ÿ Great Value
Ÿ Free Technical Support
Ÿ Huge Inventory
Ÿ Satisfaction Guaranteed
Ÿ In Stock & Ready To Ship
Ÿ High Quality At Affordable Price
Ÿ Replacements For Most Original
Equipment Manufacturers
Ÿ In Stock & Ready To Ship
® Filter CartridgesX-pendableŸ Leader In The Filtration Industry
Ÿ Great Quality At Economical Price
Ÿ Unique Clear See-Through Design
Ÿ Electronically Welded Seems
Ÿ Moisture Indicator Strip
Ÿ Replacements To Fit Most OEM’s
Ÿ Satisfaction Guaranteed
Ÿ In Stock & Ready To Ship
Purifiers & HoldersŸ Built To The Highest Standards
Ÿ 5000 - 6000 PSI Units Available
Ÿ Mil Spec Hard Anodized
Ÿ Fee Design & Tech Help Available
Ÿ US Navy Approved
Ÿ OCA Systems Available
Ÿ In Stock & Ready To Ship
Hi-Purity AgentsŸ Variety Of Agents Available
Ÿ High Quality Assured
Ÿ Available In Pints Through Drums
Ÿ Oils Blended Specifically For
Breathing Air Use
Ÿ In Stock & Ready To Ship
TMX-tractor Filter Cartridges
Page 6 - 05/2015 Products That Purify High PSI Air & Gas
ABOUT LAWRENCE FACTOR
The origins of our company are rooted deeply in the field
of high-pressure gases, founded in 1979 with the Flask
refillable filter cartridge for scuba diving. Since that time,
and through decades of technical advancement, Lawrence
Factor has become one of the most recognized names in
breathing-air. But our expertise doesn’t end there. Our
purification products are found in a multitude of
applications.
To name a few:
Ÿ CNGV Refueling Stations
Ÿ Aeronautical / Space Exploration
Ÿ Scientific Laboratories
Ÿ Missile Guidance Systems
Still whenever you see a breathing mask, be it in a
hazardous environment, entering the scene of a fire, or
plunging deep beneath the sea . . . think Lawrence Factor,
the company that puts Pure Breathing Air into that mask.
THE PEOPLE AT LAWRENCE FACTOR
Since our founding, we have earned a reputation for
quality, innovation, fair pricing, and homespun customer
service. How do we do it?
Dedicating ourselves to achieving these goals every day.
Ÿ The satisfaction of our customers.
Ÿ The advancement of our products.
Located on a two acre manufacturing campus, we house an ISO accredited research lab, a fully fitted CNC machining
facility and a streamlined assembly floor. But most likely it is our people that achieve the greatest accomplishments.
It’s a customer service staff that lives to see smiles beam through the phone and it’s the individuals who craft our
products determined to see perfection in every detail.
ABOUT OUR PRODUCTS
The slogan “High Purity At High Pressure” perfectly sums up the theme in our products. Whether a filter cartridge or a
length of stainless-steel tubing, every product in this catalog was designed for use with highly compressed and highly
purified gases. The theme doesn’t end with that, however. Behind the brand name on each package lies a product with
a reputation for high quality . . . a reputation earned on an unending quest for dependable engineering, stout
construction, and creative ideas. We know that more than just our reputation relies on these factors; your safety does!
You Have Made The Right Choice With Lawrence Factor High Purity Products
Front view of our 4790 building in Miami Lakes, FL.
Front view of our 4740 building in Miami Lakes, FL.
Air / Gas AnalysisŸ Fully Accredited
Ÿ Easy To Use Sample Kit Affordable
Ÿ Great Customer Service
Ÿ Knowledgeable Tech Support
Hi-PSI Accessories
Ÿ High Quality At Affordable Price
Ÿ Huge Inventory
Ÿ Rebuilt & Service Kits Available
Ÿ In Stock & Ready To Ship
Hi-PSI Compressor Parts
Ÿ Manufactured To Hi-Standards
Ÿ Easy To Use Kits Available
Ÿ Great Value
Ÿ Free Technical Support
Ÿ Huge Inventory
Ÿ Satisfaction Guaranteed
Ÿ In Stock & Ready To Ship
Ÿ High Quality At Affordable Price
Ÿ Replacements For Most Original
Equipment Manufacturers
Ÿ In Stock & Ready To Ship
® Filter CartridgesX-pendableŸ Leader In The Filtration Industry
Ÿ Great Quality At Economical Price
Ÿ Unique Clear See-Through Design
Ÿ Electronically Welded Seems
Ÿ Moisture Indicator Strip
Ÿ Replacements To Fit Most OEM’s
Ÿ Satisfaction Guaranteed
Ÿ In Stock & Ready To Ship
Purifiers & HoldersŸ Built To The Highest Standards
Ÿ 5000 - 6000 PSI Units Available
Ÿ Mil Spec Hard Anodized
Ÿ Fee Design & Tech Help Available
Ÿ US Navy Approved
Ÿ OCA Systems Available
Ÿ In Stock & Ready To Ship
Hi-Purity AgentsŸ Variety Of Agents Available
Ÿ High Quality Assured
Ÿ Available In Pints Through Drums
Ÿ Oils Blended Specifically For
Breathing Air Use
Ÿ In Stock & Ready To Ship
TMX-tractor Filter Cartridges
www.Lawrence-Factor.com 05/2015 - Page 7
How To Order X-zam
1. Complete the “Air / Gas
Analysis Set-up Form”.
2. Call your local X-zam agent or
the X-zam customer service line
at (305) 430-0550 or (800) 338-
5493 for the agent nearest you.
Be prepared to give the
information by phone or you
may be asked to fax the
completed form.
When ordering X-zam make
sure to have the following
information handy:
Ÿ Test site address & phone.Ÿ Start date of your program.Ÿ The standard you want to
meet (see Standards Chart).Ÿ Program frequency desired.Ÿ Mailing address where
documents are to be sent.
3. The kits are then sent to you
on a pre-scheduled basis.
4. You (or your agent) retrieve
the specimen. Collecting a
specimen is quite simple with
our application specific test
kits. Just follow the few
instructions that come with the
test kit.
5. The kit is then sent to X-zam
Labs and an analysis is
performed.
6. You will then receive a
complete back up documen-
tation which includes a
handsome certificate that you
will be proud to display and a
technical report showing all the
analytes and the standard
they’re measured against. X-zam Labs will electronically
store these records for retrieval
at any time in the future.
For help on any of these steps
please contact our customer
service department who will be
happy to assist you every step of
the way.
To maintain the integrity of your air/gas production, as in making any kind of product, you're wise to adhere to a quality assurance program. As part of that program - especially in the case of critically pure gases - it's prudent to include analysis of the result gas. You'll want to employ a third party lab to perform these unbiased analysis. A lab that uses precise scientific methods. One that's accredited
®by an international agency. One with agents across the globe. One such as X-zam Labs at Lawrence Factor.
Using precision methodology, X-zam Labs carefully analyzes many types of inert air/gas specimens to search out even the smallest traces of undesirable contaminants. Undetected, these pollutants can have far-reaching or disastrous consequence: disabling illness, inoperative equipment, or simply ineffectual product. The reasons for accurate analysis are endless. You may simply be driven to comply with safety standards set by agencies such as the NFPA or OSHA.
With X-zam Labs, collecting a specimen is easy - you can do-it-yourself or one of our local agents can be enlisted to pay a house visit. The lab provides everything needed within our patented sampling kit, which is loaned to you at no charge. Trapping the specimen couldn't be simpler because our kit acts just like the cylinders you're already accustomed to filling - there are no complicated vials or gadgets. Tests can be conducted on a one-time basis or you may enroll in a program where specimens are analyzed on a regular schedule. Or - if you analyze large numbers of specimens - there is the option to electronically submit your sample via our immediate response instrument: the Lab On Locale.
In the field of purified gases - no other firm matches the resources and qualifications of Lawrence Factor. With our purification expertise and technical support - X-zam Labs has a distinct advantage in analyzing compressed air/gas.
AIR & GAS ANALYSIS
IS MY AIR PURE ENOUGH TO BREATHE? HAS THAT MOISTURE BEEN SUBTRACTED FROM THIS
NITROGEN? DOES OUR AIR MEET NFPA RECOMMENDATIONS? IF YOU’RE ASKING YOURSELF QUESTIONS
LIKE THESE - THEN X-ZAM LABS IS YOUR BEST ANSWER. X-ZAM LABS CAN ANALYZE YOUR AIR/GAS
AGAINST THE LIMITS SET BY AGENCIES SUCH AS OSHA, NFPA, PADI, AND THE U.S. NAVY.
STEP 4Results Reported
STEP 2Specimen Sample
Shipped To X-zam Labs
STEP 1Specimen Collected
STEP 3Specimen Received
And Analyzed
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
X-zam Laboratories
How To Order X-zam
1. Complete the “Air / Gas
Analysis Set-up Form”.
2. Call your local X-zam agent or
the X-zam customer service line
at (305) 430-0550 or (800) 338-
5493 for the agent nearest you.
Be prepared to give the
information by phone or you
may be asked to fax the
completed form.
When ordering X-zam make
sure to have the following
information handy:
Ÿ Test site address & phone.Ÿ Start date of your program.Ÿ The standard you want to
meet (see Standards Chart).Ÿ Program frequency desired.Ÿ Mailing address where
documents are to be sent.
3. The kits are then sent to you
on a pre-scheduled basis.
4. You (or your agent) retrieve
the specimen. Collecting a
specimen is quite simple with
our application specific test
kits. Just follow the few
instructions that come with the
test kit.
5. The kit is then sent to X-zam
Labs and an analysis is
performed.
6. You will then receive a
complete back up documen-
tation which includes a
handsome certificate that you
will be proud to display and a
technical report showing all the
analytes and the standard
they’re measured against. X-zam Labs will electronically
store these records for retrieval
at any time in the future.
For help on any of these steps
please contact our customer
service department who will be
happy to assist you every step of
the way.
To maintain the integrity of your air/gas production, as in making any kind of product, you're wise to adhere to a quality assurance program. As part of that program - especially in the case of critically pure gases - it's prudent to include analysis of the result gas. You'll want to employ a third party lab to perform these unbiased analysis. A lab that uses precise scientific methods. One that's accredited
®by an international agency. One with agents across the globe. One such as X-zam Labs at Lawrence Factor.
Using precision methodology, X-zam Labs carefully analyzes many types of inert air/gas specimens to search out even the smallest traces of undesirable contaminants. Undetected, these pollutants can have far-reaching or disastrous consequence: disabling illness, inoperative equipment, or simply ineffectual product. The reasons for accurate analysis are endless. You may simply be driven to comply with safety standards set by agencies such as the NFPA or OSHA.
With X-zam Labs, collecting a specimen is easy - you can do-it-yourself or one of our local agents can be enlisted to pay a house visit. The lab provides everything needed within our patented sampling kit, which is loaned to you at no charge. Trapping the specimen couldn't be simpler because our kit acts just like the cylinders you're already accustomed to filling - there are no complicated vials or gadgets. Tests can be conducted on a one-time basis or you may enroll in a program where specimens are analyzed on a regular schedule. Or - if you analyze large numbers of specimens - there is the option to electronically submit your sample via our immediate response instrument: the Lab On Locale.
In the field of purified gases - no other firm matches the resources and qualifications of Lawrence Factor. With our purification expertise and technical support - X-zam Labs has a distinct advantage in analyzing compressed air/gas.
AIR & GAS ANALYSIS
IS MY AIR PURE ENOUGH TO BREATHE? HAS THAT MOISTURE BEEN SUBTRACTED FROM THIS
NITROGEN? DOES OUR AIR MEET NFPA RECOMMENDATIONS? IF YOU’RE ASKING YOURSELF QUESTIONS
LIKE THESE - THEN X-ZAM LABS IS YOUR BEST ANSWER. X-ZAM LABS CAN ANALYZE YOUR AIR/GAS
AGAINST THE LIMITS SET BY AGENCIES SUCH AS OSHA, NFPA, PADI, AND THE U.S. NAVY.
STEP 4Results Reported
STEP 2Specimen Sample
Shipped To X-zam Labs
STEP 1Specimen Collected
STEP 3Specimen Received
And Analyzed
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
X-zam Laboratories
www.Lawrence-Factor.com 05/2015 - Page 9
TMLab On Locale (LOL) enables you to analyze a compressed air specimen remotely and instantly - receiving test results directly from Lawrence Factors’ X-zam Lab without delay. Using absolutely precise and proprietary methodology - this is the only system of its’ kind! There’s no need to carry a chemists credentials or possess any special skills in order to operate Lab On Locale because it is “so easy”.
There is not much more involved in the five (5) minute process.
1. Collecting a specimen in one of our standard sampling kits. 2. Insert the specimen into the instrument.3. Continue as prompted by the LOL Unit.
LOL consists of a communication device, on your end, which electronically surveys the air/gas specimen and then uploads critical data to our lab via real time modem. Full-scale lab instruments and live technicians
work in concert, on our end, to collect, interpret, and analyze this data. A complete report is then transmitted back to you where a hard copy is printed out. This entire process takes less than 5 minutes - giving you the advantage to produce, analyze, and supply a safe air/gas product to the customer in minutes.
LAB ON LOCALE™
Portable Gas Analysis System
SubMicronFilter
High pressure tasks sometimes depend on high-pressure air & gas. For instance; a diver plunging into the oceans depths toting a capsule of air on his back, or a fire/rescue worker venturing into the smoky unknown with an even tinier capsule, technicians viewing their work through lenses of ultra-pure nitrogen, or a transit-driver at the helm of a bus fueled by a tank of natural gas. Getting those gases as clean, dry, and pure as possible requires equipment that can work under pressures even higher, without fail.
Lawrence Factor air/gas purifiers are built to serve critically pure needs and at pressures up to 20,000psi. Based on a disposable cartridge concept, Lawrence Factor appliances are able to produce air & gases which exceed most recognized purity standards. In this manner your exacting requirements can be met by configuring (or re-configuring) the cartridges at any time - time after time.
Look over an Lawrence Factor purification appliance. Immediately apparent are brawny qualities like all stainless steel fasteners and couplers. However, it's not only what you see but what you don't see. More subtle are the aerospace grade metals in our pressure vessels; veneers of protective plating making them impervious to nature's meanest elements; rigorous testing, a sanitizing scrub down before leaving our factory; and the all o-ringed joints which make it a snap to change cartridges or perform regular service.
These are qualities you can't discern just by looking but they are a part of every Lawrence Factor purification appliance. The result of all this care is a purification appliance meant to last for many years and require a minimum amount of maintenance - a reflection of our concerns for your concerns.
FOR RELIABLE AIR/GAS PURIFICATION, YOU NEED A FILTRATION APPLIANCE THAT PERFORMS
TO THE HIGHEST STANDARDS. ONE DESIGNED TO LICK THE MOST TENACIOUS IMPURITIES.
ONE THAT IS ABLE TO FLEX WHEN TECHNOLOGY DOES.
PURIFIERS & HOLDERS
Flexible Future
A Lawrence Factor purification appliance is versatile. It’s one that won't easily become obsolete. As our scientists work toward developing new purification technology - new cartridges are frequently introduced-giving you a greater range of options. This means that by upgrading your cartridges you can always enhance the performance of your Lawrence Factor purification appliance.
Join the future and make the natural choice in compressed air/gas purification. Contact our sales department for an explanation on how a “Lawrence Factor Purification Appliance” can flex for you tomorrow.
Purity & Performance
The reason for the exceptional
performance of all Lawrence
Factor air/gas purifiers can be
found at the core of their
cartridge towers. Inside are ®Lawrence Factor X-pendable
TMand X-tractor filters. By far, the
most respected brand of high-
pressure cartridges-they can be
quickly and easily configured to
conform to evolving demands or
technology. This not only makes them ideal for meeting the latest purity requirements but for use at experimental sites and laboratories.
“X” Brand Cartridges:1. Are offered in a wide range of models.2. Formulated to scores of specific applications.3. Are completely self contained so that contaminants are retained in the cartridge.
AF-531-110-F
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
HF-961-131-F
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
HF-962-134-F
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
Cartridge Holder
Relief Valve
MechanicalFilter Holder
3 PointManifold
Priority Valve
Petcock Bleeder
Cartridge Change Indicator
S/S Coupler
S/S Check Valve
Drain Valve
Includes Adsorbent Cartridge
w/ Internal Check Valve
AF-531-111-F
Ÿ Portable
Ÿ Light Weight
Ÿ Easy To Use
Ÿ Fast Results
Ÿ Accredited
LAB ON LOCALE IS A REVOLUTIONARY APPROACH
FOR ANALYZING BREATHING AIR & GAS
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
PERSONAL CARBON MONOXIDE PROTECTIONCO-PROTM
TMCO-PRO was designed as a quick and effective way to protect yourself from the harmful effects of Carbon Monoxide often found in scuba tanks.
Carbon Monoxide is a poison and in a divers breathing air it can cause illness, injury, or even death. Since CO is an invisible, odorless gas it can not be detected by just “sniffing”. With CO-PRO™ anyone can test his/her own air quickly and affordably. It is ideal for the diver who travels to remote locations where air quality is often questionable or even unsafe.
TMCO-PRO is simple, effective, and inexpensive (retails $7.95 each). Other such products can go for hundreds of dollars and can be very complicated. Each packet contains a balloon, instructions, and a small indicating disk. It can also be used to test multiple tanks during a day (24 hrs.) or until carbon monoxide is detected.
Visit www.CO-PRO.com where you will find more information and details about this product.
*NOT Intended For Trimix Gas.
Page 10 - 05/2015 Products That Purify High PSI Air & Gas
Ambient
Item No. Frequency
Ambient Air
LS-902370 One Time
LS-902371 Semi Annual
LS-902372 Quarterly
LS-902373 Monthly
O2: 20.9%, CO: 0.16 ppm, CO2: 340 ppm, CH4: 0.16 ppm, NO2: 0.02 ppb, NO: 2.0 ppb, SO2: 0.02 ppb, C2H2: 0.02 ppb, N2O: 0.03 ppb
Ambient Air
Diving / Scuba
Item No. Frequency
CGA Grade E - 2011
LS-901170 One Time
LS-901171 Semi Annual
LS-901172 Quarterly
LS-901173 Monthly
O2: 20-22%, CO: 10 ppm, CO2: 1000 ppm, CH4: 25 ppm, H2O: *67 ppm, Dew Point: -50° F, Oil & Particles: 5 mg/m3, Odor: None
*May vary with intended use.
CGA Grade E - 2011
Item No. Frequency
CSA Z-180.1-00
LS-906070 One Time
LS-906071 Semi Annual
LS-906072 Quarterly
LS-906073 Monthly
O2: 20-22%, N: 78-80%, CO: 5 mL/m3, CO2: 500 mL/m3, CH4: 10 mL/m3, Vol Non-Meth HC: 5 mL/m3, Vol Hal HC: 5 mL/m3, Oil & Particles: 1 mg/m3, Dew Point: -63° F, H2O: 27 mL/m3, Odor: None
CSA Z-180.1-00
Item No. Frequency
CSA Z-275.2-04
LS-908070 One Time
LS-908071 Semi-Annual
LS-908072 Quarterly
LS-908073 Monthly
O2: 20-22%, N: 78-80%, CO: 5 mL/m3, CO2: 500 mL/m3, CH4: 10 mL/m3, Vol Non-Meth HC: 5 mL/m3, Vol Hal HC: 5 mL/m3, NO2: 0.3 mL/m3, N2O: 2.5 mL/m3, Oil & Particles: 1 mg/m3, Dew Point: -63° F, H2O: 27 mL/m3, Odor: None
CSA Z-275.2-04
Item No. Frequency
NAVSEA - 2008
LS-902070 One Time
LS-902071 Semi Annual
LS-902072 Quarterly
LS-902073 Monthly
O2: 20-22%, CO: 20 ppm, CO2: 1000 ppm, CH4: 25 ppm, Oil & Particles: 5 mg/m3, Odor: None
NAVSEA - 2008
Item No. Frequency
NITROX I
LS-902721 One Time
O2: 31-33%, CO: 10 ppm, CO2: 1000 ppm, CH4: 25 ppm, Oil & Particles: 5 mg/m3, Dew Point: -50° F, H2O: *67 ppm, Odor: None
*May vary with intended use.
NITROX I
Item No. Frequency
NITROX II
LS-902722 One Time
O2: 35-37%, CO: 10 ppm, CO2: 1000 ppm, CH4: 25 ppm, Oil & Particles: 5 mg/m3, Dew Point: -50° F, H2O: *67 ppm, Odor: None
*May vary with intended use.
NITROX II
Item No. Frequency
O.C.A. - Oxygen Compatible
LS-909170 One Time
LS-909171 Semi Annual
LS-909172 Quarterly
LS-909173 Monthly
O2: 20-22%, CO: 2 ppm, CO2: 1000 ppm, CH4: 25 ppm, H2O: *67 ppm, Dew Point: -50° F, Oil & Particles: 0.1 mg/m3, Odor: None
*May vary with intended use.
O.C.A. - Oxygen Compatible
European Standard
Item No. Frequency
EN12021 - 1998
LS-909270 One Time
COMPRESSED AIR FOR BREATHING APPARATUS
O2: 20-22%, CO: 15 ppm, CO2: 500 ppm, H2O: 25 ppm, Dew Point: -64° F, Oil & Particles: 0.5 mg/m3, Odor: None
EN12021 - 1998
Fire Fighting / SCBA
Item No. Frequency
CGA Grade D / NFPA 1500
LS-901270 One Time
LS-901271 Semi Annual
LS-901272 Quarterly
LS-901273 Monthly
O2:20-22%, CO: 10 ppm, CO2: 1000 ppm, CH4: 25 ppm, H2O: 24 ppm, Dew Point: -65° F, Oil & Particles: 5 mg/m3, Odor: None
CGA Grade D / NFPA 1500
Item No. Frequency
NFPA 1404
LS-902670 One Time
LS-902671 Semi Annual
LS-902672 Quarterly
LS-902673 Monthly
O2: 19.5-23.5%, CO: 10 ppm, CO2: 1000 ppm, H2O: *67 ppm, Dew Point: -50° F, Oil & Particles: 5 mg/m3, Odor: None
*May vary with intended use.
NFPA 1404
Item No. Frequency
NFPA 1989 - 2008
LS-901675 One Time
LS-901676 Semi Annual
LS-901677 Quarterly
O2: 19.5-23.5%, N: 75-81%, CO: 5 ppm, CO2: 1000 ppm, CH4: 25 ppm, H2O: 24 ppm, Dew Point: -65°F, Oil & Particles: 2 mg/m3, Odor: None
NFPA 1989 - 2008
Item No. Frequency
NFPA 1989 - 2013
LS-901684 One Time
LS-901685 Semi Annual
LS-901686 Quarterly
O2: 19.5-23.5%, N: 75-81%, CO: 5 ppm, CO2: 1000 ppm, CH4: 25 ppm, H2O: 24 ppm, Dew Point: -65°F, Oil & Particles: 2 mg/m3, Odor: None
NOTE: Requires posting of certificate.
NFPA 1989 - 2013
AIR /GAS ANALYSIS
www.Lawrence-Factor.com 05/2015 - Page 11
Fire Fighting / SCBA + Dive
Item No. Frequency
CGA Grade E / NFPA 1500 - 2013
LS-901570 One Time
LS-901571 Semi Annual
LS-901572 Quarterly
LS-901573 Monthly
O2: 20-22%, CO: 10 ppm, CO2: 1000 ppm, CH4: 25 ppm, H2O: 24 ppm, Dew Point: -65° F, Oil & Particles: 5 mg/m3, Odor: None
CGA Grade E / NFPA 1500 - 2013
Item No. Frequency
CGA Grade E / NFPA 1989 - 2008
LS-901680 One Time
LS-901681 Semi Annual
LS-901682 Quarterly
O2: 19.5-23.5%, N: 75-81%, CO: 5 ppm, CO2: 1000 ppm, CH4: 25 ppm, H2O:24 ppm, Dew Point: -65°F, Oil & Particles: 2 mg/m3, Odor: None
CGA Grade E / NFPA 1989 - 2008
Item No. Frequency
CGA Grade E / NFPA 1989 - 2013
LS-901690 One Time
LS-901691 Semi Annual
LS-901692 Quarterly
O2: 19.5-23.5%, N: 75-81%, CO: 5 ppm, CO2: 1000 ppm, CH4: 25 ppm, H2O:24 ppm, Dew Point: -65°F, Oil & Particles: 2 mg/m3, Odor: None
NOTE: Requires posting of certificate.
CGA Grade E / NFPA 1989 - 2013
Item No. Frequency
CGA Grade L / NFPA 1989 - 2013
LS-901970 One Time
LS-901971 Semi Annual
LS-901972 Quarterly
O2: 19.5-23.5%, N: 75-81%, CO: 5 ppm, CO2: 1000 ppm, CH4: 25 ppm, H2O:24 ppm, Dew Point: -65°F, Oil & Particles: 2 mg/m3, Odor: None
NOTE: Requires posting of certificate.
CGA Grade L / NFPA 1989 - 2013
Health Care Facilities
Item No. Frequency
CGA Grade N - 2011
LS-902170 One Time
LS-902171 Semi Annual
LS-902172 Quarterly
LS-902173 Monthly
O2: 19.5-23.5%, CO: 10 ppm, CO2: 500 ppm, NO2: 2.5 ppm, NO: 2.5 ppm, SO2: 5 ppm, H2O: *67 ppm, Dew Point: -50° F, Oil & Particles: None, Odor: None
* May vary with intended use.
CGA Grade N - 2011
Item No. Frequency
EU-USP 2008
LS-906080 One Time
LS-906081 Semi Annual
LS-906082 Quarterly
LS-906083 Monthly
Depending on class levels the standard changes. Call us for more information.
EU-USP 2008
Item No. Frequency
NFPA 99 - 2002
LS-902570 One Time
LS-902571 Semi Annual
LS-902572 Quarterly
LS-902573 Monthly
O2: 19.5-23.5%, CO: 10 ppm, CO2: 500 ppm, CH4: 25 ppm, Vol Non-Meth HC: 2 mL/m3, Vol Hal HC: 2 mL/m3, Dew Point: -39° F, Oil & Particles: 5 mg/m3, Odor: None
NFPA 99 - 2002
Industrial
Item No. Frequency
ISO 8573-1
LS-907070 One Time
LS-907071 Semi Annual
LS-907072 Quarterly
LS-907073 Monthly
Depending on class levels the standard changes. Call us for more information.
ISO 8573-1
Industrial Breathing Air
Item No. Frequency
CGA Grade D - 2011
LS-901070 One Time
LS-901071 Semi Annual
LS-901072 Quarterly
LS-901073 Monthly
O2: 19.5-23.5%, CO: 10 ppm, CO2: 1000 ppm, H2O: *67 ppm, Dew Point: -50° F, Oil & Particles: 5 mg/m3, Odor: None
*May vary with intended use.
CGA Grade D - 2011
Item No. Frequency
OSHA CFR 29 - 2006
LS-902470 One Time
LS-902471 Semi Annual
LS-902472 Quarterly
LS-902473 Monthly
O2: 19.5-23.5%, CO: 10 ppm, CO2: 1000 ppm, H2O: *67 ppm, Dew Point: -50° F, Oil & Particles: 5 mg/m3, Odor: None
*May vary with intended use.
OSHA CFR 29 - 2006
Industrial Compressed Air
Item No. Frequency
CGA Grade A - 2011
LS-901770 One Time
LS-901771 Semi Annual
LS-901772 Quarterly
LS-901773 Monthly
O2: 19.5-23.5%
CGA Grade A - 2011
Item No. Frequency
Instrument Air
LS-901370 One Time
LS-901371 Semi Annual
LS-901372 Quarterly
LS-901373 Monthly
Depending on class levels the standard changes.Call us for more information.
Instrument Air
AIR / GAS ANALYSIS
Page 12 - 05/2015 Products That Purify High PSI Air & Gas
Miscellaneous
Item No. Frequency
CO-Pro™
LP-601001-CO Single
LP-601005-CO 5 Pack
LP-601024-CO 24 Pack
A quick and effective way to detect the presence of Carbon Monoxide (CO) in breathing air. Ideal for the diver who travels to remote locations where air quality is often questionable or even unsafe.
CO-Pro™
Item No. Frequency
Lab On Locale™
LP-22919172 N / A
Is a portable gas analysis system designed specially for breathing air analysis. This system is capable of analyzing a gas sample from a remote location and transmitting a signal back to L-Factor's X-zam® laboratories.
Lab On Locale™
AIR /GAS ANALYSIS
www.Lawrence-Factor.com 05/2015 - Page 13
TMLab On Locale (LOL) enables you to analyze a compressed air specimen remotely and instantly - receiving test results directly from Lawrence Factors’ X-zam Lab without delay. Using absolutely precise and proprietary methodology - this is the only system of its’ kind! There’s no need to carry a chemists credentials or possess any special skills in order to operate Lab On Locale because it is “so easy”.
There is not much more involved in the five (5) minute process.
1. Collecting a specimen in one of our standard sampling kits. 2. Insert the specimen into the instrument.3. Continue as prompted by the LOL Unit.
LOL consists of a communication device, on your end, which electronically surveys the air/gas specimen and then uploads critical data to our lab via real time modem. Full-scale lab instruments and live technicians
work in concert, on our end, to collect, interpret, and analyze this data. A complete report is then transmitted back to you where a hard copy is printed out. This entire process takes less than 5 minutes - giving you the advantage to produce, analyze, and supply a safe air/gas product to the customer in minutes.
LAB ON LOCALE™
Portable Gas Analysis System
SubMicronFilter
High pressure tasks sometimes depend on high-pressure air & gas. For instance; a diver plunging into the oceans depths toting a capsule of air on his back, or a fire/rescue worker venturing into the smoky unknown with an even tinier capsule, technicians viewing their work through lenses of ultra-pure nitrogen, or a transit-driver at the helm of a bus fueled by a tank of natural gas. Getting those gases as clean, dry, and pure as possible requires equipment that can work under pressures even higher, without fail.
Lawrence Factor air/gas purifiers are built to serve critically pure needs and at pressures up to 20,000psi. Based on a disposable cartridge concept, Lawrence Factor appliances are able to produce air & gases which exceed most recognized purity standards. In this manner your exacting requirements can be met by configuring (or re-configuring) the cartridges at any time - time after time.
Look over an Lawrence Factor purification appliance. Immediately apparent are brawny qualities like all stainless steel fasteners and couplers. However, it's not only what you see but what you don't see. More subtle are the aerospace grade metals in our pressure vessels; veneers of protective plating making them impervious to nature's meanest elements; rigorous testing, a sanitizing scrub down before leaving our factory; and the all o-ringed joints which make it a snap to change cartridges or perform regular service.
These are qualities you can't discern just by looking but they are a part of every Lawrence Factor purification appliance. The result of all this care is a purification appliance meant to last for many years and require a minimum amount of maintenance - a reflection of our concerns for your concerns.
FOR RELIABLE AIR/GAS PURIFICATION, YOU NEED A FILTRATION APPLIANCE THAT PERFORMS
TO THE HIGHEST STANDARDS. ONE DESIGNED TO LICK THE MOST TENACIOUS IMPURITIES.
ONE THAT IS ABLE TO FLEX WHEN TECHNOLOGY DOES.
PURIFIERS & HOLDERS
Flexible Future
A Lawrence Factor purification appliance is versatile. It’s one that won't easily become obsolete. As our scientists work toward developing new purification technology - new cartridges are frequently introduced-giving you a greater range of options. This means that by upgrading your cartridges you can always enhance the performance of your Lawrence Factor purification appliance.
Join the future and make the natural choice in compressed air/gas purification. Contact our sales department for an explanation on how a “Lawrence Factor Purification Appliance” can flex for you tomorrow.
Purity & Performance
The reason for the exceptional
performance of all Lawrence
Factor air/gas purifiers can be
found at the core of their
cartridge towers. Inside are ®Lawrence Factor X-pendable
TMand X-tractor filters. By far, the
most respected brand of high-
pressure cartridges-they can be
quickly and easily configured to
conform to evolving demands or
technology. This not only makes them ideal for meeting the latest purity requirements but for use at experimental sites and laboratories.
“X” Brand Cartridges:1. Are offered in a wide range of models.2. Formulated to scores of specific applications.3. Are completely self contained so that contaminants are retained in the cartridge.
AF-531-110-F
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
HF-961-131-F
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
HF-962-134-F
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
Cartridge Holder
Relief Valve
MechanicalFilter Holder
3 PointManifold
Priority Valve
Petcock Bleeder
Cartridge Change Indicator
S/S Coupler
S/S Check Valve
Drain Valve
Includes Adsorbent Cartridge
w/ Internal Check Valve
AF-531-111-F
Ÿ Portable
Ÿ Light Weight
Ÿ Easy To Use
Ÿ Fast Results
Ÿ Accredited
LAB ON LOCALE IS A REVOLUTIONARY APPROACH
FOR ANALYZING BREATHING AIR & GAS
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
PERSONAL CARBON MONOXIDE PROTECTIONCO-PROTM
TMCO-PRO was designed as a quick and effective way to protect yourself from the harmful effects of Carbon Monoxide often found in scuba tanks.
Carbon Monoxide is a poison and in a divers breathing air it can cause illness, injury, or even death. Since CO is an invisible, odorless gas it can not be detected by just “sniffing”. With CO-PRO™ anyone can test his/her own air quickly and affordably. It is ideal for the diver who travels to remote locations where air quality is often questionable or even unsafe.
TMCO-PRO is simple, effective, and inexpensive (retails $7.95 each). Other such products can go for hundreds of dollars and can be very complicated. Each packet contains a balloon, instructions, and a small indicating disk. It can also be used to test multiple tanks during a day (24 hrs.) or until carbon monoxide is detected.
Visit www.CO-PRO.com where you will find more information and details about this product.
*NOT Intended For Trimix Gas.
www.Lawrence-Factor.com 05/2015 - Page 15
Every L-Factor appliance works on the simple concept of
pushing your gas through a series of filter cartridges housed
within vessels rated for your working pressure. The condition of
the resulting gas is precisely controlled through configuration
and selection of cartridges. When the gas quality begins to
diminish the cartridges are replaced with fresh ones.
Gas staging through a typical L-Factor appliance is outlined
below:
EntryŸ Cooled gas enters through a Multi-Port Manifold.Ÿ Several gas sources can be piped to one inlet
manifold.
Stage 1 (Condensable Removal)Mechanical Cartridge Holder
Ÿ Particles and droplets (water and oil) are squeezed
from the gas.Ÿ Fluid is drained off periodically via a manual or
automatic valve.Ÿ Relief Valve protects against over-pressurization.Ÿ Check Valve prevents back flow of gas after leaving mechanical
filter.
Stage 2 (Vapor removal) Adsorbent Cartridge Holder(s)
Ÿ Gaseous contaminants (such as water,
hydrocarbons, solvents, CO, and Co ) are isolated 2
and contained on various adsorbents, desiccants,
and catalysts.Ÿ Particles generated by adsorbent chemicals, which
may escape to the gas stream, are captured by
barriers built into the cartridges.
DischargeŸ Purified gas leaves through a multi-port manifold.Ÿ Final capture of fine particles is made by a sub-micron filter.Ÿ Bleeder valve permits drainage of gas from unit.Ÿ Priority valve maintains constant pressure within the filters.Ÿ Check valve prevents back flow of gas.Ÿ Gauge indicates internal pressure.
Cartridge is spent when Lifeband™ changes color from blue to beige along entire length.
REPLACE ALL CARTRIDGES IN SYSTEM AT THIS TIME.
WWW.LAWRENCE-FACTOR.COMMiami, Florida 33014 USA
Filter Car tridge
X-pendable®
Relief Valve
Drain
OutletInlet
Priority Valve
Check Valve
Multi-Port Manifold
Sub Micron Filter
Gauge
Bleeder Valve
Sub MicronFilter
There are a number of recipes for
mixing up a batch of Oxygen Enriched
Air (NITROX). Illustrated here is a
partial pressure method you can use
with an oil-lubed compressor as the
air source. It is the most convenient
and affordable way for any fill station
owner to add Nitrox to his mix of
products. Before getting started,
however, we
implore you to
read the
following
discussion:
When air for
recreational
diving fails to
meet prescribed specs - the
repercussions may easily endanger
life or health. At another level, air
being prepared for mixing into high-
pressure oxygen can be just as
unforgiving - with the potential rising
to "extremely risky - extremely
quickly". Compressed oxygen is highly
volatile in the presence of fuel (for
instance: particles & lubricant oils)
and we have seen cases where dive
air systems have erupted into
explosive flamethrowers virtually
within seconds! We cannot stress too
much that it is critically important to
keep your nitrox system well
maintained and contaminant free.
Like any finicky piece of apparatus -
a nitrox blending system will pose its'
share of idiosyncrasies during
construction and installation. It takes
a professional to recognize these
developments as they arise. It also
takes experience to know how to
solve them. Once installed, trained
personnel are required in order to
continue operating it properly. We
cannot stress too much that a nitrox
system, with sufficient safety
features built-in, must be installed
and operated by qualified
professionals.
AN L-FACTOR HF APPLIANCE IS THE PERFECT CHOICEFOR POLISHING AIR TO BE MIXED WITH OXYGEN
TYPICAL CONFIGURATION OF AN “OCA” SYSTEM
MODEL HF-961-13140,000 CF CAPACITY
OCA MIXINGPANEL WITHO2 MONITOR
STANDARD GRADE “E”FILL WHIPS
OIL - LUBEDCOMPRESSOR
MODEL AF-531-11265,000 CF CAPACITY
STORAGE BANKS
OPTIONALSTORAGE
BANK
MEDICALGRADEOXYGEN
PURIFIER PRODUCING“E” BREATHING AIR
HYPER PURIFIERPRODUCING O.C.A.
“HF”
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
Example of ignited pressurevessel due toill-maintainednitrox system.In this casetherewerenoinjuries,although theestablishment wasseverely damaged.
BREATHING AIR: Hi-Purity At High Pressure The Lawrence Factor Way
Specialty Applications
NITROX: When Mixing Something More Accurate Than A Highball
HI-PSI ACCESSORIES
KEEPING YOUR AIR&GAS PURIFICATION SYSTEM PERFORMING AT TIP TOP CONDITION REQUIRES
SUPERIOR MAINTENANCE PRODUCTS. LAWRENCE FACTOR MAKES IT CONVENIENT TO GET THOSE
PRODUCTS - PRODUCTS KNOWN FOR RELIABILITY, RUGGEDNESS, AND PERFORMANCE.
As reliable as your equipment may be-there will come a time when it will
require some maintenance or perhaps you will simply want to enhance it's
performance. This is the time where a Lawrence Factor high-pressure
accessory can satisfy your needs.
Just as rugged and reliable as our purification appliances - because many
of these are the very same components that go into our appliances - they
are built to those same high standards. Of course, all of Lawrence
Factor’s air/gas accessories are crafted to serve critically pure needs and
at highly elevated pressures - some as high as 10,000 psi.
We offer a healthy selection of valving, piping & hose, gauges, and
air&gas controls - all constructed of the toughest materials, withstanding
nature's meanest elements. Our engineers took extra care that these
products would have as few moving parts as possible - knowing that this
feature will keep them operating far longer than most and make them a
snap to service.
Indicator
Scuba Yoke
Handwheel
Guage
Bleed ValveCheck Valve
Petcock
L-Factor Relief Valve
A product so reliable yet so
fairly priced that it is
destined to rise above other
industry favorites. This
Pressure Relief Valve has
proven to be:
ŸDurableŸ StoutŸResistant To Harsh
ElementsŸEasy To Maintain
Testing has shown that it can
withstand thousands of cycles
without leaking-by or
drifting. The body is
constructed of high tensile,
hard coated aluminum, while
all whetted areas are
corrosion resistant materials
such as stainless steel or
plastic resin. The inlet fitting
comes standard with 1/4”
npt-male threads but can be
easily swaped for Boss or
Metric versions.
Plenty of attention has been
paid to details such as:
Ÿ Polished EdgesŸ Pre-Taped Pipe ThreadsŸ Inclusion of Safety WireŸ 12 Month Warranty
For more information, please
contact customer service at:(305) 430-0550 or via email:[email protected]
RELIEF VALVEVL-530131-TH
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
Page 16 - 05/2015 Products That Purify High PSI Air & Gas
CNG DryersFor small to medium sized fueling stations developed specifically for dehydrating and filtering of Compressed Natural Gas (CNG) fuels used in vehicles. A superior choice in comparison against high and low pressure regenerative dryers. Due to our "once-thru" cartridge concepts-contaminants remain in the cartridges; there is no loose desiccant to contend with or clean up after; and little danger of environmental pollution.
Included: Inlet manifold, check valve, relief valve, priority valve, petcock vent, pressure gauge, all stainless steel couplers and fasteners, micron particle filter, X-pendable® cartridge set, instruction manual, full 1 year warranty on overall equipment and lifetime warranty against corrosion of the cartridge holders.
Specifications: Working Pressure 2000 – 5000 psi, Max. Operating Temperature 120°F, Safety Factor 4:1, Cycle Life 15,000, Aluminum with Black Hard Anodized Cartridge Holders.
AF-531-111-CNG
60000
20
CF
SCFM
22" W x 38" H x 5" DDimension
Cartridge(s): X53687
AF Type CNG Filter-Dryers - 5000 psi
Item No.
AF-531-112-CNG
120000
40
CF
SCFM
24" W x 38" H x 5" DDimension
Cartridge(s): X53687
AF Type CNG Filter-Dryers - 5000 psi
Item No.
AF-531-113-CNG
180000
40
CF
SCFM
30" W x 38" H x 5" DDimension
Cartridge(s): X53687
AF Type CNG Filter-Dryers - 5000 psi
Item No.
AF-531-114-CNG
240000
60
CF
SCFM
36" W x 38" H x 5" DDimension
Cartridge(s): X53687
AF Type CNG Filter-Dryers - 5000 psi
Item No.
PURIFIERS
www.Lawrence-Factor.com 05/2015 - Page 17
Economy PurifiersFor low flow rates or smaller air/gas producers - these units serve up a power-packed purifier in a tiny package. By combining coalescing and adsorbent purification under one roof-at a conservative price and without sacrificing performance.
Included: Check valve, relief valve, priority valve, drain valve, pressure gauge, all stainless steel couplers and fasteners, micron particle filter, cartridge set, instruction manual, full 1 year warranty and lifetime warranty against corrosion of the cartridge holders.
Specifications: Working Pressure 2000 - 5000 psi, Max. Operating Temperature 120°F, Safety Factor 4:1, Cycle Life 15,000, Aluminum with Black Hard Anodized Cartridge Holders.
AF-541-101-F
13000
8
CF
SCFM
12" W x 28" H x 5" DDimension
Cartridge(s): X542415
AF Type Economy Purifier - 5000 psi
Item No.
AF-541-103-F
18000
12
CF
SCFM
12" W x 37" H x 5" DDimension
Cartridge(s): X542423
AF Type Economy Purifier - 5000 psi
Item No.
AF-541-104-F
6500
8
CF
SCFM
8" W x 20" H x 5" DDimension
Cartridge(s): X54249
AF Type Economy Purifier - 5000 psi
Item No.
Hyper PurifiersPolishing clean gases to ultra pure levels (up to 99.99%) requires equipment designed to those standards. Our Hyper Purifiers will meet the demands of applications such as very pure laboratory gases, blending gases, oxygen compatible air, and anywhere that “zero air” might be required. Hyper Purifiers are a sensible and simple way to process these gases.
Included: Inlet isolation valve and manifold, redundant check valves, priority valve, pressure gauge, petcock vent, all stainless steel couplers and fasteners, high efficiency micron filter, cartridge set, instruction manual, full 1 year warranty.
Optional: High Capacity Micronic Filter and Ultra Efficiency Micron Filter.
Specifications: Max Pressure 5000 or 6000 psi, Max. Temperature 120°F, Safety Factor 4:1, Cycle Life 15,000, Aluminum with Bronze Hard Anodized Cartridge Holder(s).
HF-961-111-F
18000
9
CF
SCFM
11" H x 38" W x 5" DDimension
Cartridge(s): X96337
HF Type Hyper Purifier - 5000 psi
Item No.
PURIFIERS
Page 18 - 05/2015 Products That Purify High PSI Air & Gas
HF-961-114-F
75000
22
CF
SCFM
34" H x 44" W x 5" DDimension
Cartridge(s): X96507, X96677 (2), X96087, FC-532050-MF
HF Type Hyper Purifier - 5000 psi
Item No.
HF-961-131-6000
40000
12
CF
SCFM
18" H x 38" W x 5" DDimension
Cartridge(s): X96677, X96337
HF Type Hyper Purifier - 6000 psi
Item No.
HF-961-131-F
40000
12
CF
SCFM
18" H x 38" W x 5" DDimension
Cartridge(s): X96677, X96337
HF Type Hyper Purifier - 5000 psi
Item No.
HF-962-134-6000
7000
6
CF
SCFM
11" H x 32" W x 6" DDimension
Cartridge(s): X51338 Optional: Handle
HF Type Hyper Purifier - 6000 psi
Item No.
HF-962-134-F
7000
6
CF
SCFM
11" H x 32" W x 6" DDimension
Cartridge(s): X96338 Optional: Handle
HF Type Hyper Purifier - 5000 psi
Item No.
PURIFIERS
www.Lawrence-Factor.com 05/2015 - Page 19
Standard PurifiersSuited to producing average amounts and types of purified air/gas - our standard purifiers satisfy flow demands between 6 and 75 SCFM. These units are the staple of the breathing air industry - including fire brigades and dive retailers.
Included: Inlet manifold, check valve, relief valve, cartridge change indicator, priority valve, drain valve, petcock vent, pressure gauge, all stainless steel couplers and fasteners, micron particle filter, cartridge set, instruction manual, full 1 year warranty and lifetime warranty against corrosion of the cartridge holders.
Specifications: Working Pressure 2000 - 5000 psi, Operating Temperature 120°F, Safety Factor 4:1, Cycle Life 15,000, Aluminum with Black Hard Anodized Cartridge Holders.
AF-531-110-F
13000
12
CF
SCFM
18" W x 22" H x 5" DDimension
Cartridge(s): X53240
AF Type Standard Purifier - 5000 psi
Item No.
AF-531-111-F
26000
20
CF
SCFM
18" W x 38" H x 5" DDimension
Cartridge(s): X53247
AF Type Standard Purifier - 5000 psi
Item No.
AF-531-112-6000
120000
40
CF
SCFM
27" W x 38" H x 5" DDimension
Cartridge(s): X53677, X53247
AF Type Standard Purifier - 6000 psi
Item No.
AF-531-112-F
65000
40
CF
SCFM
27" W x 38" H x 5" DDimension
Cartridge(s): X53677, X53247
AF Type Standard Purifier - 5000 psi
Item No.
AF-531-113-F
110000
40
CF
SCFM
30" W x 38" H x 5" DDimension
Cartridge(s): X53677 (2), X53247
AF Type Standard Purifier - 5000 psi
Item No.
PURIFIERS
Page 20 - 05/2015 Products That Purify High PSI Air & Gas
AF-531-114-F
140000
60
CF
SCFM
36" W x 38" H x 5" DDimension
Cartridge(s): X53507, X53677 (2), X53437
AF Type Standard Purifier - 5000 psi
Item No.
PURIFIERS
www.Lawrence-Factor.com 05/2015 - Page 21
Adsorbent Cartridge HoldersL-Factor's Adsorbent Cartridge Holders are a convenient way to upgrade your purification system or to add a “point of use” adsorbent filter. Combined with an X-pendable® cartridge - our cartridge holders can solve most any impurity concern in your compressed gas. Choices of materials include Aluminum, Steel, and Stainless Steel with pressure ratings running up to 15,000 psi.
Included: Parts List, Decal with Cartridge Number, one Cartridge (customer must specify application), & full 1 year warranty and lifetime warranty against corrosion of the cartridge holder.
Recommend: Spare Cartridge, High Purity Thread Lube, & Seal Kit
AB Type Adsorbent Cartridge Holder - 700 psi
Item No. Cartridge Style SCFM
PU-820035-AB 82 Series, 6 Lb. 30
Specifications: 15,000 Cycle Life, 7075T6 Aluminum, Hard Anodized Finish (Black), 4:1 Safety Factor
AF Type Adsorbent Cartridge Holder - 5000 psi
Item No. Cartridge Style SCFM
PU-530001-AF 53 Series, 1 Lb. 40
PU-530002-AF 53 Series, 2 Lb. 60
PU-530003-AF 53 Series, 3 Lb. 75
Specifications: 15,000 Cycle Life, 7075T6 Aluminum, Hard Anodized Finish (Black), 4:1 Safety Factor
TH Type Adsorbent Cartridge Holder - 15,000 psi
Item No. Cartridge Style SCFM
PU-540001-TH 54 Series, 1 Lb. 40
Specifications: 500,000 Cycle Life, 303 Stainless Steel, Brushed / Turned Finish, 4:1 Safety Factor
Duplex Cartridge HoldersThe economy approach both mechanical and adsorbent filtration under one roof. These L-Factor Duplex Holders are a clever design which shortcuts the need for separated housing in low flow air/gas systems. They are ideal for portable compressors under 10 cfm.
Included: Parts List, Decal with Cartridge Number, one Cartridge (customer must specify application), & full 1 year warranty and lifetime warranty against corrosion of the cartridge holder.
Recommend: Spare Cartridge, High Purity Thread Lube, & Seal Kit
AF Type Duplex Cartridge Holder - 5000 psi
Item No. Cartridge Style SCFM
PU-540024-AF 20 Micron, 54 Series .5 Lb 8
PU-540025-AF 20 Micron, 54 Series 2.5 Lb 20
Specifications: 15,000 Cycle Life, 7075T6 Aluminum, Hard Anodized Finish (Black), 4:1 Safety Factor
CARTRIDGE HOLDERS
Page 22 - 05/2015 Products That Purify High PSI Air & Gas
Mechanical Cartridge HoldersMechanical cartridge holders are intended to remove the bulkiest solids, particle, and droplets. Placed at the inlet to an adsorbent purifier - the mechanical filter tackles the heavier contaminants before they overload the adsorbent cartridges. They are available in an assortment of ratings and materials. If your purification requirements are highly stringent - we offer hop up kits which can increase efficiency to as high as 99.9% and at sub micron ratings.
Included: Parts List, Decal with Cartridge Number, Cartridge (customer must specify application), & full 1 year warranty and lifetime warranty against corrosion of the cartridge holders.
Recommend: Spare Cartridge, High Purity Thread Lube, & Seal Kit
AE Type Mechanical Cartridge Holder - 6000 psi
Item No. Cartridge Style SCFM
PU-530020-AE Hanging, 20 Micron 75
PU-530021-AE Standing, 20 Micron 75
Specifications: 50,000 Cycle Life, 7075T6 Aluminum, Hard Anodized Finish (Black), Bronze Cartridge Style, 4:1 Safety Factor
TH Type Mechanical Cartridge Holder - 15,000 psi
Item No. Cartridge Style SCFM
PU-540021-TH Hanging, 0.1 Micron 75
Specifications: 250,000 Cycle Life, 303 Stainless Steel, Brushed / Turned Finish, 4:1 Safety Factor
Micronic Particle Filter HoldersAn L-Factor In-Line Micronic Filter strategically placed at usage points along your compressed air/gas system can protect devices and controls against particle solids. Simple to install and changing cartridges is easy.
Included: Parts List, Decal with Cartridge Number, Cartridge (customer must specify application), & full 1 year warranty and lifetime warranty against corrosion of the cartridge holders.
Recommend: Spare Cartridge, High Purity Thread Lube, & Seal Kit
AF Type Micronic Particle Filter Holder - 6000 psi
Item No. Cartridge Style SCFM
PU-530019-AF 0.1 Micron, Opt. 0.01 Micron 125
VL-530041-AF 2 Micron, Opt. 10 Micron 20
Specifications: 50,000 Cycle Life, 7075T6 Aluminum, Hard Anodized Finish (Black), 4:1 Safety Factor
CARTRIDGE HOLDERS
www.Lawrence-Factor.com 05/2015 - Page 23
™If your requirements involve Hi-psi air or inert gases, Lawrence Factor “once through” X-® ®pendable filters are highly effective. X-pendables are recognized worldwide as the High
Performance Filter Cartridge. Precision engineered and charged with laboratory
formulated purifying media, our filters are designed for optimum removal of
contaminants. We manufacture models to fit most major brands of hi-psi purifiers.
®Outside an X-pendable is a rugged transparent shell with electronically welded seams. ®Because it’s transparent you can use your X-pendable filter cartridge to easily watch the
performance of your compressed air/gas system - observing unusual accumulations of
sediment or moisture in the cartridge. As an additional aid, many cartridges include our ™ ®trademark LifeBand that changes color to alert you when your X-pendable has exceeded
®its useful life. Unlike metal filters, an X-pendable will never rust or corrode. Plus, with ®our special welding process, an X-pendable’s seams won’t split.
™Inside is a carefully balanced mixture of adsorbents such as Vaporshell for moisture
removal or activated carbon to eliminate oil vapors, and a micronic filter element for
pre-filtering of fine dust and grit. We employ a variety of Desiccants which have been
activated to maximum adsorbency. By activation, the desiccants can hold up to 22% of 0their own weight in water vapors. This enables us to drop dewpoints as low as -100 F. In
™all, Lawrence Factor has developed, blended and activated more than 16 species of ®adsorbents and catalysts which are used in X-pendable Cartridges. In some cases,
particularly for specialized applications, a filtering agent may be specially treated to ®enhance effectiveness. Hundreds of X-pendable models are available. This translates into
the ideal filter cartridge designed for unusual applications and experimental sites or
simply to better enhance a standard application.
HI-PURITY FILTER CARTRIDGES
AS SEEN BY A PEARL WRAPPED AROUND AN IRRITATING PEBBLE - THE NATURAL WORLD
HAS ITS WAY OF OUTSMARTING POLLUTANTS. LAWRENCE FACTOR HAS WOVEN THOSE
TACTICS - STEEPED IN SCIENCE & TECHNOLOGY - INTO OUR FILTERS: SNARING PARTICLES
ON SUB-MICRON SPIDER WEBS, FORCING VAPORS INTO TURBULENT RAINFALL, OR PUTTING
UP MOLECULAR DAMS TO STOP GASEOUS IMPURITIES. WHEN SOLVING YOUR PURITY NEEDS ® TM
- X-PENDABLE & X-TRACTOR CARTRIDGES ARE THE NATURAL CHOICE.
INGERSOLL-RANDAIR COMPRESSORS
®
JORDAIR ®
KOMPRESSOREN
POSEIDON
COMPRESSORS ®
®
®
®
®
M A K O®
®
ALLIED AIR PRODUCTS, INC.
DELTECH
ENGINEERING
AIR-DRY CORP OF AMERICA
Aftermarket Filters To Fit Major Brands
Improve the performance of your current purifier by installing
®X-pendable cartridges. We offer versions to fit many OEM brands.
EAGLE AIR SYSTEMS
FLUIDCONCEPTS INC.
GETTING THE BEST PERFORMANCE OUT OF
X-PENDABLE CARTRIDGES
Ÿ All cartridges in the system must be replaced as a set.
Ÿ Do not swap used cartridges from one tower to another.
Ÿ Avoid contamination of the downstream system and lines by replacing the cartridges before they are spent.
Ÿ Maximum cartridge life once installed is six months regardless if it has not reached the full processing capacity.
®X-PENDABLE FILTER CARTRIDGES
TMX-TRACTOR CARTRIDGES
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
®
®
® HAMWORTHYCOMPRESSOR SYSTEMS
®
www.Lawrence-Factor.com 05/2015 - Page 25
The pedigree of each Lawrence Factor purity agent stems from the selection
of chemistry we employ in our power packed filter cartridges. After the many
years of study, the immeasurable hours of performance testing in the real
world, and the unmatched expertise of Lawrence Factor that went into
developing these agents-you can feel confident that you are choosing a
product that's able to perform to your highest standards.
Our sorbents target and capture specific molecules in a web of atomic
magnets, effectively eliminating even the minutest traces of undesired
substance from your air&gas stream. Choose from a range of desiccants,
catalysts, and carbons each formulated to perform under a specific set of
conditions-and all packaged in a variety of sizes with long-term shelf life in
mind.
We also offer a selection of lubes and cleansing agents-all designed to work
in concert and enhance the performance of your air&gas purification
equipment. Naturally, every product coming from Lawrence Factor is of the
highest grade and the highest purity.
HI-PURITY SORBENTS & AGENTS
EXTENSIVE RESEARCH BY THE PURITY MASTERS AT LAWRENCE FACTOR HAS RESULTED IN SOME OF
THE FINEST AND MOST POWERFUL PURIFICATION AGENTS AVAILABLE FOR COMPRESSED AIR&GAS
SYSTEMS. EACH BEING FORMULATED TO PERFORM AT THE HEIGHTS OF PRESSURE, UNDER THE
TOUGHEST CONDITIONS, AND IS PRODUCED USING THE RIGID QUALITY CONTROLS THAT HAVE MADE
L-FACTOR THE MOST RESPECTED NAME IN HI-PSI PURIFIED AIR&GAS.
Formulated for Breathing Apparatus Technicians - L.F.W. allows for rapid cleansing of:
Ÿ SCUBA RegulatorsŸ ValvesŸ Parts
Dirt, corrosion, silicone, grease, salt deposits, and a host of other grimy substances are no match for the dissolving power of L.F.W. Simply immerse the object to be cleaned and watch as dirt just flakes right off. Because it will not harm rubber, entire assemblies can be soaked for easy disassembly. L.F.W. performs best when used in an ultrasonic cleaning unit but also works well by itself or in solution with mild heat.
One pint of L.F.W. will make as many as 300 valve assemblies absolutely gleam. That means they can cost as little as three-cents each to clean.
Lubricating OilsLawrence Factor lubricating oils
have been created expressly for
breathing air & gas compression
systems.
SecoLube is:Ÿ Low FoamingŸ Provides Excellent
Separation From AirŸ Has a high flash point.
Economically priced to offer you
considerable savings in
application and installation costs,
SecoLube should be at the heart
of your purification process.
Molecular Sieve 3A
Molecular Sieve 13X
Activated Carbon
Silica Gel
Activated AluminaDesicant Blend
SecoLubeTM
Lawrence Factor Wash
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
FILTER REFERENCE GUIDE
The filter reference guide below can help you understand all the components and meanings of Lawrence Factors filter numbering system.
CHEMICAL SYMBOLS
AA = Activated Alumina
AC = Activated Carbon
BX = Blend / MS 13X & Silica Gel
HOP = Hopcalite or Monoxycon
4A = Molecular Sieves 4A
13X = Molecular Sieves 13X
SG = Silica Gel
SOME COMMON FORMULAS
13x 13x
AC
13x
HOP
AC
AC AA HOP
AC
AC
67 62 24 22 25 44
X10248
AP-1
X-pendableX-pendable® ®
our cartridge
oem number
retention springtop / plugorange spacer
chemical media
life band
nipple / fitting
particulate pads
CARTRIDGE NUMBER
X 2410
X-p
endable
Bra
nd
Filte
r St
yle
Chem
ical Form
ula
Length
Desi
gnati
on
8
UNDERSTANDING LAWRENCE FACTORS FILTER NUMBERS
X 65 24 7 vs. X 65 24 0
Ÿ 65 - Filter Style The same on both filters.
Ÿ 24 - Chemical Formula The same on both filters.
Ÿ 0 vs 7 - Length Designation Different on both filters.
Conclusion: Both filters are the same style and the same chemical formula. Since they have different length designations, they are NOT interchangeable.
X 65 24 7 vs. X 65 67 7
Ÿ 65 - Filter Style The Same on both filters.
Ÿ 24 vs 67 - Chemical Formula Different on both filters.
Ÿ 7 - Length Designation The same on both filters.
Conclusion: Both filters are the same style and length. Though they both fit the same tower, the chemical formulas are different. One is a dryer only and the other is a fill purifier.
LENGTH DESIGNATION
0 = 10” 5 = 25” 7 = 27” 8 = 18” 9 = 8” 12 = 9” 14 = 14”
Page 26 - 05/2015 Products That Purify High PSI Air & Gas
Fits Aero Dri® / Keco® / Gannon®
44 Series (Adsorbent)
Item No. Fits Rating
X44100 MA1 DR3
X44190 NA CL6
X44220 C1AC OD5
X44250 C1AA DR4
X44350 NA ND6
X44420 C06 CM6
X44440 NA CM6
X44520 NA CL5
X44670 C113X DR5
X44680 C14A ND5
X44690 NA DR4
44 Series (Coalescor)
Item No. Fits Rating
FC-444401-WF MF-1-5894 10 Micron
Fits Air Dry® Corporation of America
20 Series (Adsorbent)
Item No. Fits Rating
X201011 G4075 DR3
X202211 G4077 OD5
X202411 G4077-1C9 BR5
X202511 G4076 DR4
X203511 G4072-1 ND6
X204211 NA CM6
X206511 G4074 NG5
X206611 G4073 NG5
X206711 G4071 DR5
X206711-C G4071 Special DR6
X206811 G4072 ND5
24 Series (Adsorbent)
Item No. Fits Rating
X24100 G4085 DR3
X24107 G4045 DR3
X24147-C NA CL7
X24220 G4087 OD5
X24227 G4047 OD5
X24240 G4087-1C9 BR5
X24247 G4047-1-C9 BR5
X24250 G4086 DR4
X24257 G4046 DR4
X24350 G4082-1 ND6
X24350-C G4082-1 ND7
X24357 G4042-1 ND6
X24420 NA CM6
X24427 NA CM6
X24430 NA CM6
X24480 G408-C-9 CM5
X24487 G404-C-9 CM5
X24500 NA DR4
X24507 NA DR4
X24620 G4087-1 CL5
X24627 G4047-1 BR5
X24650 G4084 NG5
X24657 G4044 NG5
X24660 G4083 NG5
X24667 G4043 NG5
X24670 G4081 DR5
X24670-C 54048-CL DR6
X24677 G4041 DR5
X24680 G4082 ND5
X24687 G4042 DR5
FILTERS
www.Lawrence-Factor.com 05/2015 - Page 27
45 Series (Adsorbent)
Item No. Fits Rating
X45100 G4065 DR3
X45220 G4067 OD5
X45250 G4066 DR4
X45440 NA CM6
X45520 NA CL5
X45650 G4065 NG5
X45670 G4061 DR5
X45680 G4067 ND5
79 Series (Adsorbent)
Item No. Fits Rating
X792211 G4091-7 OD5
X792411 NA BR5
X793511 G4092-1 ND6
X796311 NA CL5
X796711 G4090-0 DR5
Fits Alkin®
14 Series (Adsorbent)
Item No. Fits Rating
X14247 6556 BR5
X14248 Alkin® Purifier BR5
X14249 6556 BR5
X14627 NA CL5
X14628 7293 CL5
X14677 Alkin® DR5
X14678 Alkin® Dryer DR5
X14679 Alkin® Dryer DR5
14 Series (Air Intake)
Item No. Fits Rating
AA-140101-PP 7764-03 20 Micron
14 Series (Coalescor)
Item No. Fits Rating
FC-140102-PP 6554-05
Fits Allied Air Products®
10 Series (Adsorbent)
Item No. Fits Rating
X10228 NA OD5
X10248 AP-1 BR5
X10628 NA CL5
X10678 AP-2 DR5
FILTERS
Page 28 - 05/2015 Products That Purify High PSI Air & Gas
Fits Alta Robbins®
72 Series (Adsorbent)
Item No. Fits Rating
X72180 NA CL6
X72185 NA CL6
X72220 BCD-AC OD5
X72225 SPT-AC OD5
X72235 NA BR6
X72240 NA BR5
X72245 SPT-C1 BR5
X72255 NA DR4
X72420 BCD-H1 CM6
X72430 NA CM6
X72435 SPT-C3 CM6
X72500 NA DR4
X72505 NA DR4
X72535 SPT-C5 CM6
X72600 NA CL4
X72605 NA CL4
X72620 NA CL5
X72625 SPT-C2 CL5
X72635 SPT-C4 CL5
X72655 NA NG5
X72670 BCD-13X DR5
X72675 SPT-13X DR5
X72800 NA BR4
X72805 NA BR4
Fits American Bristol Industries® / Scott®
25 Series (Adsorbent)
Item No. Fits Rating
X252451 65XCAC-SPEC BR5
X254351 65 CAC CM6
X254951 65XCAC BR5
X255451 NA CM5
X25670 65X-10C DR5
X25670-A 65X-10CA DR5
X256751 65X DR5
25 Series (Air Intake)
Item No. Fits Rating
AA-250001-PP ABE065387 20 Micron
26 Series (Adsorbent)
Item No. Fits Rating
X26222 50AC OD5
X26242 50XCAC BR5
X26252 NA DR4
X26422 50C CM6
X26432 50CAC CM6
X26439 50-CAC9 CM6
X26502 NA DR4
X26602 NA CL4
X26622 50XAC CL5
X266245 50-ALS CL4
X26672 50X DR5
X26679 50-X9 DR5
X267713 B9-C23-4 PA5
X26802 NA BR4
26 Series (Air Intake)
Item No. Fits Rating
AA-262601-PP 22445 20 Micron
FILTERS
www.Lawrence-Factor.com 05/2015 - Page 29
26 Series (Coalescor)
Item No. Fits Rating
FC-262601-WF AB281251 10 Micron
27 Series (Adsorbent)
Item No. Fits Rating
X274351 60-CAC CM6
X274951 NA BR5
X275451 NA CM5
X27670 60X-10C DR5
X276751 60X DR5
28 Series (Adsorbent)
Item No. Fits Rating
X282414 52-XCAC BR5
X282417 42XCAC BR5
X286717 42-X5A DR5
28 Series (Air Intake)
Item No. Fits Rating
AA-282803-PP AB281273 20 Micron
29 Series (Adsorbent)
Item No. Fits Rating
X29222 NA OD5
X29242 Y-26450 BR5
X29622 Y-26455 CL5
X29672 Y-24504 DR5
Fits Bauer Compressor®
21 Series (Adsorbent)
Item No. Fits Rating
X21150 NA CL6
X21240 80114 BR5
X21350-C NA ND7
X21620 80100 CL5
FILTERS
Page 30 - 05/2015 Products That Purify High PSI Air & Gas
22 Series (Adsorbent)
Item No. Fits Rating
X22217 58823 OD7
X22220 NA OD5
X22221 066471 OD5
X22227 58823 Special OD5
X22231 67224 BR5
X22237 58827 BR5
X22240 58821 BR5
X22241 NA BR5
X22247 058827 Special BR5
X22257 58824 DR4
X22377 60035 DR5
X22420 68481 CM6
X22427 68416 CM6
X22437 NA CM6
X22470 63282 CM8
X22477 65562 CM8
X22501 NA DR4
X22511 61686 CL5
X22517 60036 CL5
X22560 60030 CL5
X22570 60031 BR5
X22571 61687 BR5
X22577 60037 BR5
X22620 58820 CL5
X22621 62565 CL5
X22627 58826 CL5
X22650 72767 NG5
X22657 NA NG5
X22670 NA DR5
X22671 NA DR5
X22677 58825 DR5
X22687 090569A NG5
X22689 NA NG5
22 Series (Air Intake)
Item No. Fits Rating
AA-222201-PP N04823 20 Micron
AA-222202-PP N0070 20 Micron
AA-222203-PP N03029 20 Micron
AA-222204-PP N25950 20 Micron
AA-222205-PP N25886 20 Micron
22 Series (Coalescor)
Item No. Fits Rating
FC-220027-SB 061859 10 Micron
FC-220028-SB 061858 30 Micron
FC-220029-SB 061860 10 & 30 Micron
FC-221020-SB N02726 20 Micron
22 Series (Oil)
Item No. Fits Rating
FO-220030-PP N25326/G 5 Micron
FO-220031-PP N15839 18 Nominal
222 Series (Adsorbent)
Item No. Fits Rating
X22229 NA OD5
X22249 59183 BR5
X22629 57679 CL5
X22679 NA DR5
FILTERS
www.Lawrence-Factor.com 05/2015 - Page 31
23 Series (Adsorbent)
Item No. Fits Rating
X23226 04852 OD5
X23626 NA CL5
X23629 06961 CL5
X23676 NA DR4
Fits Bristol Pneumatics®
19 Series (Adsorbent)
Item No. Fits Rating
X192214 NA OD5
X192217 NA OD5
X192412 NA BR5
X192414 Y39390 BR5
X192417 NA BR5
X196212 YC8974 CL5
X196214 Y38947 CL5
X196217 26485 CL5
X196714 NA DR5
X196717 NA DR5
Fits Coltri® / Max Air® / Nuvair®
15 Series (Adsorbent)
Item No. Fits Rating
X151217 Aero Sub® Purifier BR4
X152212 NA OD5
X152412 NA BR5
X153012 NA CL5
X156212 NA CL5
X156712 NA DR5
X156717 Aero Sub® Dryer DR5
15 Series (Air Intake)
Item No. Fits Rating
AA-150080-PP IF-35A 20 Micron
30 Series (Adsorbent)
Item No. Fits Rating
X302214 NA OD5
X30229 NA OD5
X302414 NA BR5
X30249 NA BR5
X30439 NA CM6
X305014 NA DR4
X30509 NA DR4
X306014 NA CL4
X30609 NA CL4
X306114 NA CL4/ND4
X306214 NA CL5
X30629 059085 CL5
X306714 NA DR5
X30679 NA DR5
X306814 NA NG5
X308014 NA CR4
FILTERS
Page 32 - 05/2015 Products That Purify High PSI Air & Gas
30 Series (Air Intake)
Item No. Fits Rating
AA-300022-PP 070-0 20 Micron
AA-300023-PP 040-823 20 Micron
30 Series (Coalescor - Hop-up Kit)
Item No. Fits Rating
FC-30KIT-SB 30 Series Housing 10 Micron
49 Series (Adsorbent)
Item No. Fits Rating
X49238 SC000543-MHC BR6
X49578 SC000543-MHCP BR5
X49618 NA CL5/ND5
X49678 SC000543-M DR5
X49688 NA ND5
51 Series (Air Intake)
Item No. Fits Rating
AA-510030-PP MCH13 20 Micron
Fits Deltech®
Indicator
Item No. Fits Rating
GI-851900-PA Deltech® NA
Fits Deltech® / Del-Monox®
85 Series (Adsorbent)
Item No. Fits Rating
X854534 BA102 BR5
X856434 NA BR5
X85647 BA4 BR5
X85677 NA DR5
X856934 NA DR4
86 Series (Adsorbent)
Item No. Fits Rating
X863429 BA5 BR5
FILTERS
www.Lawrence-Factor.com 05/2015 - Page 33
Fits Eagle Compressor®
33 Series (Adsorbent)
Item No. Fits Rating
X33227 EC004239 OD5
X33670 50CS01 DR5
X336722 50CM01 DR5
X33677 50CL01 DR5
34 Series (Adsorbent)
Item No. Fits Rating
X34240 50CS03 BR5
X342422 50CM03 BR5
X34247 50CL03 BR5
36 Series (Adsorbent)
Item No. Fits Rating
X36100 50MS-SG DR3
X36107 50ML-SG DR3
X36220 50MS-AC OD5
X36227 50ML-AC OD5
X36240 50MS03 BR5
X362422 50MM03 BR5
X36247 50ML03 BR5
X36250 50MS-A DR4
X36257 50ML-A DR4
X36430 NA CM6
X36507 NA DR4
X36620 50MS-XAC CL5
X36627 50ML-XAC CL5
X36670 50MS01 DR5
X366722 50MM01 DR5
X36677 50ML01 DR5
36 Series (Air Intake)
Item No. Fits Rating
AA-360101-PP 23-0104 10 Micron
AA-360102-PP 23-0106 / 3272282 10 Micron
AA-360103-PP 23-0107 / 32734147 10 Micron
AA-360104-PP BP-0942 10 Micron
AA-360105-PP KA1997 / 32733883 10 Micron
AA-360106-PP KA1005 / 32738973 10 Micron
AA-360107-PP NA 10 Micron
AA-360108-PP NA 10 Micron
36 Series (Coalescor)
Item No. Fits Rating
FC-365030-SB 50M394 20 Micron
37 Series (Adsorbent)
Item No. Fits Rating
X37220 50RS02 OD5
X37225 50L02 OD5
X37245 50RL03 BR5
X37420 NA CM6
X37425 NA CM6
X37435 50RL05 CM6
X37625 50RL04 CL5
FILTERS
Page 34 - 05/2015 Products That Purify High PSI Air & Gas
X37670 50RS01 DR5
X37675 50RL01 DR5
X37685 NA ND5
38 Series (Adsorbent)
Item No. Fits Rating
X38220 50-S0AC OD5
X38230 50-S003 BR6
X38440 50-SCAC CM6
X38520 50-S002 CL5
X38670 50-S001 DR5
40 Series (Adsorbent)
Item No. Fits Rating
X40490 50PM03 BR5
X404951 50PL03 BR5
X40670 50PM01 DR5
X406751 50PL01 DR5
41 Series (Adsorbent)
Item No. Fits Rating
X414917 NA BR5
X416717 NA DR5
42 Series (Adsorbent)
Item No. Fits Rating
X42249 50-TX03 BR5
43 Series (Adsorbent)
Item No. Fits Rating
X43242 50A003 BR5
X43672 50A001 DR5
X43679 50A0X9 DR5
64 Series (Adsorbent)
Item No. Fits Rating
X64240 50MRS03 BR5
X642422 50MRM03 BR5
FILTERS
www.Lawrence-Factor.com 05/2015 - Page 35
Fits Fluid Concepts®
35 Series (Adsorbent)
Item No. Fits Rating
X35228 NA OD5
X35248 A10-005 BR5
X35628 NA CL5
X35678 A10-010 DR5
Fits Hamworthy England®
13 Series (Adsorbent)
Item No. Fits Rating
X13242 Y51169 BR5
X13244 Y30304, PAS18 BR5
X13622 Y51166 CL5
X13624 Y30299 CL5
Fits Ingersoll-Rand®
50 Series (Adsorbent)
Item No. Fits Rating
X504534 123708TI BR5
X506434 NA BR5
X506734 NA DR5
Fits Jordair®
56 Series (Adsorbent)
Item No. Fits Rating
X56220 FC-1001-SS OD5
X56227 FC-3001-SS OD5
X56228 FC-2001-SS OD5
X56240 NA BR5
X56247 NA BR5
X56248 NA BR5
X56250 FC-1003-SS DR4
X56257 FC-3003-SS DR4
X56258 FC-2003-SS DR4
X56430 FC-1006-SS CM6
X56437 FC-3006-SS CM6
X56438 FC-2006-SS CM6
X56500 FC-1002-SS DR4
X56507 FC-3002-SS DR4
X56508 FC-2002-SS DR4
X56620 FC-1005-SS CL5
X56627 FC-3005-SS CL5
X56628 FC-2005-SS CL5
X56670 FC-1004-SS DR5
X56677 FC-3004-SS DR5
X56678 FC-2004-SS DR5
X56790 FC-1007-SS BR4
X56797 FC-3007-SS BR4
X56798 FC-2007-SS BR4
57 Series (Adsorbent)
Item No. Fits Rating
X57220 KTP-1001-JB OD5
X57221 KTP-2001-JB OD5
X57227 KTP-3001-JB OD5
X57430 KTP-1006-JB CM6
X57431 KTP-2006-JB CM6
FILTERS
Page 36 - 05/2015 Products That Purify High PSI Air & Gas
X57437 KTP-3006-JB CM6
X57620 KTP-1005-JB CL5
X57621 KTP-2005-JB CL5
X57627 KTP-3005-JB CL5
X57670 KTP-1004-JB DR5
X57671 KTP-2004-JB DR5
X57677 KTP-3004-JB DR5
X57790 KTP-1007-JB BR4
X57791 KTP-2007-JB BR4
X57797 KTP-3007-JB BR4
X57798 FC-2507-JB BR4
58 Series (Adsorbent)
Item No. Fits Rating
X58220 FC-1001-TS OD5
X58227 FC-3001-TS OD5
X58228 FC-2001-TS OD5
X58240 NA BR5
X58247 NA BR5
X58248 NA BR5
X58250 FC-1003-TS DR4
X58257 FC-3003-TS DR4
X58258 FC-2003-TS DR4
X58430 FC-1006-TS CM6
X58437 FC-3006-TS CM6
X58438 FC-2006-TS CM6
X58500 FC-1002-TS DR4
X58507 FC-3002-TS DR4
X58508 FC-2002-TS DR4
X58620 FC-1005-TS CL5
X58627 FC-3005-TS CL5
X58628 FC-2005-TS CL5
X58670 FC-1004-TS DR5
X58677 FC-3004-TS DR5
X58678 FC-2004-TS DR5
X58790 FC-1007-TS BR4
X58797 FC-3007-TS BR4
X58798 FC-2007-TS BR4
59 Series (Coalescor)
Item No. Fits Rating
FC-591012-WF FC-1008-SE 10 Micron
FC-591017-WF FC-708-SE 10 Micron
61 Series (Adsorbent)
Item No. Fits Rating
X61220 FC-1501-NS OD5
X61227 FC-3501-NS OD5
X61228 FC-2501-NS OD5
X61240 NA BR5
X61247 NA BR5
X61248 NA BR5
X61250 FC-1503-NS DR4
X61257 FC-3503-NS DR4
X61258 FC-2503-NS CM6
X61430 FC-1506-NS CM6
X61437 FC-3506-NS CM6
X61438 FC-2506-NS CM6
X61500 FC-1502-NS DR4
X61507 FC-3502-NS DR4
X61508 FC-2502-NS DR4
X61620 FC-1505-NS CL5
X61627 FC-3505-NS CL5
X61628 FC-2505-NS CL5
X61670 FC-1504-NS DR5
X61677 FC-3504-NS DR5
X61678 FC-2504-NS DR5
X61790 FC-1507-NS BR4
X61797 FC-3507-NS BR4
X61798 FC-2507-NS BR4
FILTERS
www.Lawrence-Factor.com 05/2015 - Page 37
62 Series (Adsorbent)
Item No. Fits Rating
X62790 FC-507-NS BR4
63 Series (Adsorbent)
Item No. Fits Rating
X63790 FC-705-NS BR5
Fits L & W Compressor®
32 Series (Adsorbent)
Item No. Fits Rating
X322214 001466, 45080053 OD5
X322222 001467, 3790 OD5
X32229 002310 OD4
X322414 NA BR5
X322422 NA BR5
X32249 002309 BR5
X326214 4508005 CL5
X326222 4508022 CL5
X32629 000644 CL5
X326714 NA DR5
X326722 NA DR5
X32679 002311 DR4
X326822 001468, 8070 NG5
X32689 002476 NG4
Fits Lawrence Factor®
104 Series (Adsorbent)
Item No. Fits Rating
X104-2420 NA BR5
46 Series (Adsorbent)
Item No. Fits Rating
X46220 NA OD5
X46240 NA BR5
X46247 NA BR5
X46677 NA DR5
X46678 NA DR5
53 Series (Adsorbent)
Item No. Fits Rating
X530730 NA OD6
X53077 NA OD6
X53078 NA OD6
X53087 NA OD6/CM4
X53107 NA DR3
X53117 NA BR6
X53120 NA BR6
X53137 NA CL7
X53157 NA CL6
X53167 NA BR6
X53177 NA OD6-CL6
X53180 NA CL6
X53187 NA CL6
FILTERS
Page 38 - 05/2015 Products That Purify High PSI Air & Gas
X532055 NA OD6
X53207 NA OD6
X53208 NA OD6
X53220 NA OD5
X532255 NA OD5
X53227 NA OD5
X53228 NA OD5
X53237 NA BR6
X53240 NA BR5
X532414 NA BR5
X532417 NA BR5
X532419 NA BR5
X532441 NA BR5
X53245 NA BR5
X532455 NA BR5
X53247 NA BR5
X53257 NA DR4
X53267 NA CL4
X53420 NA CM6
X53430 NA CM6
X53437 NA CM6
X534534 NA BR5
X53467 NA BR6
X53470 NA CM8
X53477 NA CM8
X53487 NA CM5
X53497 NA BR5
X53500 NA DR4
X535055 NA DR4
X53507 NA DR4
X53537 NA CM7
X53547 NA BR5-CM5
X53617 NA CL5 / NDS
X53620 NA CL5
X536255 NA CL5
X53627 NA CL5
X53650 NA NG5
X536554 NA NG5
X536555 NA NG5
X53657 NA NG5
X53667 NA NG5
X53670 NA DR5
X536741 NA DR5
X536755 NA DR5
X53677 NA DR5
X53680 NA NG5
X53687 NA NG5
X53697 NA DR4
53 Series (Coalescor)
Item No. Fits Rating
FC-530550-SB Hanging Mech. Filter 20 Micron
FC-530551-SB Standing Mech. Filter 10 Micron
FC-530552-SB NA .01 Micron
FC-530751-MF Standing Mech. Filter 2 Micron
FC-532050-MF Special 0.01 Micron
FC-532051-MF Special 0.1 Micron
54 Series (Adsorbent)
Item No. Fits Rating
X541115 NA BR6
X54150 NA CL6
X541615 NA BR6
X54167 NA BR6
X54177 NA OD6-CL6
X54207 NA OD6
X542223 NA OD5
X54227 NA OD5
X54240 NA BR5
X54241 NA BR5
X542414 NA BR5
X542415 NA BR5
X542420 NA BR5
X542423 NA BR5
X54247 NA BR5
X54248 NA BR5
X54249 NA BR5
X54257 NA DR4
X543055 NA OD6
X54440 NA CM6
X545015 NA DR4
X54507 NA DR4
X54537 NA CM6
X546015 NA CL4
X54620 NA CL5
X54621 NA CL5
X546215 NA CL5
X546220 NA OD5
X546223 NA OD5
FILTERS
www.Lawrence-Factor.com 05/2015 - Page 39
X54650 NA NG5
X546555 NA NG5
X54657 NA NG5
X54670 NA DR5
X54671 NA DR5
X546715 NA DR5
X546720 NA DR5
X546723 NA DR5
X546755 NA DR5
X54677 NA DR5
X54678 NA DR5
X54680 NA ND5
X546855 NA ND5
X54687 NA ND5
X548015 NA BR4
60 Series (Adsorbent)
Item No. Fits Rating
X60247 NA BR5
X60677 NA DR5
80 Series (Adsorbent)
Item No. Fits Rating
X803011 NA OD6
X804311 NA CM6
X804811 NA CM5
X806711 NA DR5
X806911 NA DR4
81 Series (Adsorbent)
Item No. Fits Rating
X816511 NA NG5
X816711 NA DR5
X816811 NA ND5
82 Series (Adsorbent)
Item No. Fits Rating
X822211 NA OD5
X822427 NA BR5
X822527 NA DR4
X826227 NA CL5
X826727 NA DR5
X827311 NA OD6
X827327 NA OD6
96 Series (Adsorbent)
Item No. Fits Rating
X96077 NA OD7
X96177 NA OD7
X96318 NA BR7
X96330 NA BR7
X96337 NA BR7
X96338 NA BR7
X96367 NA BR6
X96507 NA DR5
X96657 NA NG6
X96677 NA DR6
X96678 NA DR6
X96687 NA NG6
FILTERS
Page 40 - 05/2015 Products That Purify High PSI Air & Gas
X96780 NA DR9
X-Cell Series (Adsorbent)
Item No. Fits Rating
X-CELL 01 NA BR4
X-CELL 02 NA CL4
X-CELL 05 NA DR4
X-CELL 10 NA DR4
X-CELL 15 NA CL4
X-CELL 20 NA BR4
X-CELL 30 NA DR4
X-CELL 40 NA BR4
Fits Mako Compressor® / Comp Air®
65 Series (Adsorbent)
Item No. Fits Rating
X65100 PC-1101 DR3
X65107 PD-1103 DR3
X65220 PC-1201 OD5
X65226 04852 OD4
X65227 PD-1203 OD5
X65229 06961 OD5
X65237 NA BR6
X65240 PC-1801 BR5
X65247 PD-1803 BR5
X65248 PD-1802 BR5
X65250 PC-1401 DR4
X65257 PD-1403 DR4
X65430 PC-2001 CM6
X65437 PD-2003 CM6
X65457 NA BR5
X65500 NA DR4
X65507 NA DR4
X65600 NA CL4
X65607 NA CL4
X65620 PC-1601 CL5
X65627 PD-1603 CL5
X65629 06961 CL5
X65637 NA CL5
X65670 PC-1501 DR5
X65677 PD-1503 DR5
X65797 NA BR4
X65800 NA BR4
X65807 NA BR4
X65887 NA DR5
65 Series (Air Intake)
Item No. Fits Rating
AA-656501-PP 98262-1060 10 Micron
AA-656502-PP X0225 10 Micron
AA-656503-PP N70 20 Micron
65 Series (Coalescor)
Item No. Fits Rating
FC-651060-SB N02726 20 Micron
FC-655063-SB M212 20 Micron
65 Series (Oil)
Item No. Fits Rating
FO-650100-PP 98262-1148 5 Micron
FILTERS
www.Lawrence-Factor.com 05/2015 - Page 41
Fits Midland Diving Equipment®
87 Series (Adsorbent)
Item No. Fits Rating
X872217 H015055 OD5
X872417 NA BR5
X874017 H015039 CL6
X874117 H015050 BR6
X876217 NA CL5
88 Series (Adsorbent)
Item No. Fits Rating
X88220 H035730 OD5
X88240 NA BR5
X88400 H035712 CL6
X88410 H035720 BR6
X88620 NA CL5
89 Series (Adsorbent)
Item No. Fits Rating
X89224 H034159 OD5
X892251 H036130 OD5
X892451 NA BR5
X89404 H034153 DR6
X894051 H036107 CL6
X89414 H034158 BR6
X894151 H036120 BR6
X89624 CL5
X896251 NA CL5
X89674 H034167 DR5
X896751 NA DR5
Fits Nardi®
91 Series (Adsorbent)
Item No. Fits Rating
X912441 NA BR5
X91629 NA CL5
Fits North American®
16 Series (Air Intake)
Item No. Fits Rating
AA-166510-PP ABY39283 20 Micron
Fits Schifauer & Pek®
16 Series (Adsorbent)
Item No. Fits Rating
X162418 Schifauer & Pek® BR5
X162419 Schifauer & Pek® BR5
X166218 Schifauer & Pek® CL5
FILTERS
Page 42 - 05/2015 Products That Purify High PSI Air & Gas
Every L-Factor appliance works on the simple concept of
pushing your gas through a series of filter cartridges housed
within vessels rated for your working pressure. The condition of
the resulting gas is precisely controlled through configuration
and selection of cartridges. When the gas quality begins to
diminish the cartridges are replaced with fresh ones.
Gas staging through a typical L-Factor appliance is outlined
below:
EntryŸ Cooled gas enters through a Multi-Port Manifold.Ÿ Several gas sources can be piped to one inlet
manifold.
Stage 1 (Condensable Removal)Mechanical Cartridge Holder
Ÿ Particles and droplets (water and oil) are squeezed
from the gas.Ÿ Fluid is drained off periodically via a manual or
automatic valve.Ÿ Relief Valve protects against over-pressurization.Ÿ Check Valve prevents back flow of gas after leaving mechanical
filter.
Stage 2 (Vapor removal) Adsorbent Cartridge Holder(s)
Ÿ Gaseous contaminants (such as water,
hydrocarbons, solvents, CO, and Co ) are isolated 2
and contained on various adsorbents, desiccants,
and catalysts.Ÿ Particles generated by adsorbent chemicals, which
may escape to the gas stream, are captured by
barriers built into the cartridges.
DischargeŸ Purified gas leaves through a multi-port manifold.Ÿ Final capture of fine particles is made by a sub-micron filter.Ÿ Bleeder valve permits drainage of gas from unit.Ÿ Priority valve maintains constant pressure within the filters.Ÿ Check valve prevents back flow of gas.Ÿ Gauge indicates internal pressure.
Cartridge is spent when Lifeband™ changes color from blue to beige along entire length.
REPLACE ALL CARTRIDGES IN SYSTEM AT THIS TIME.
WWW.LAWRENCE-FACTOR.COMMiami, Florida 33014 USA
Filter Car tridge
X-pendable®
Relief Valve
Drain
OutletInlet
Priority Valve
Check Valve
Multi-Port Manifold
Sub Micron Filter
Gauge
Bleeder Valve
Sub MicronFilter
There are a number of recipes for
mixing up a batch of Oxygen Enriched
Air (NITROX). Illustrated here is a
partial pressure method you can use
with an oil-lubed compressor as the
air source. It is the most convenient
and affordable way for any fill station
owner to add Nitrox to his mix of
products. Before getting started,
however, we
implore you to
read the
following
discussion:
When air for
recreational
diving fails to
meet prescribed specs - the
repercussions may easily endanger
life or health. At another level, air
being prepared for mixing into high-
pressure oxygen can be just as
unforgiving - with the potential rising
to "extremely risky - extremely
quickly". Compressed oxygen is highly
volatile in the presence of fuel (for
instance: particles & lubricant oils)
and we have seen cases where dive
air systems have erupted into
explosive flamethrowers virtually
within seconds! We cannot stress too
much that it is critically important to
keep your nitrox system well
maintained and contaminant free.
Like any finicky piece of apparatus -
a nitrox blending system will pose its'
share of idiosyncrasies during
construction and installation. It takes
a professional to recognize these
developments as they arise. It also
takes experience to know how to
solve them. Once installed, trained
personnel are required in order to
continue operating it properly. We
cannot stress too much that a nitrox
system, with sufficient safety
features built-in, must be installed
and operated by qualified
professionals.
AN L-FACTOR HF APPLIANCE IS THE PERFECT CHOICEFOR POLISHING AIR TO BE MIXED WITH OXYGEN
TYPICAL CONFIGURATION OF AN “OCA” SYSTEM
MODEL HF-961-13140,000 CF CAPACITY
OCA MIXINGPANEL WITHO2 MONITOR
STANDARD GRADE “E”FILL WHIPS
OIL - LUBEDCOMPRESSOR
MODEL AF-531-11265,000 CF CAPACITY
STORAGE BANKS
OPTIONALSTORAGE
BANK
MEDICALGRADEOXYGEN
PURIFIER PRODUCING“E” BREATHING AIR
HYPER PURIFIERPRODUCING O.C.A.
“HF”
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
LAWRENCE FACTOR, Inc.Miami Lakes, FL U.S.A.
Example of ignited pressurevessel due toill-maintainednitrox system.In this casetherewerenoinjuries,although theestablishment wasseverely damaged.
BREATHING AIR: Hi-Purity At High Pressure The Lawrence Factor Way
Specialty Applications
NITROX: When Mixing Something More Accurate Than A Highball
HI-PSI ACCESSORIES
KEEPING YOUR AIR&GAS PURIFICATION SYSTEM PERFORMING AT TIP TOP CONDITION REQUIRES
SUPERIOR MAINTENANCE PRODUCTS. LAWRENCE FACTOR MAKES IT CONVENIENT TO GET THOSE
PRODUCTS - PRODUCTS KNOWN FOR RELIABILITY, RUGGEDNESS, AND PERFORMANCE.
As reliable as your equipment may be-there will come a time when it will
require some maintenance or perhaps you will simply want to enhance it's
performance. This is the time where a Lawrence Factor high-pressure
accessory can satisfy your needs.
Just as rugged and reliable as our purification appliances - because many
of these are the very same components that go into our appliances - they
are built to those same high standards. Of course, all of Lawrence
Factor’s air/gas accessories are crafted to serve critically pure needs and
at highly elevated pressures - some as high as 10,000 psi.
We offer a healthy selection of valving, piping & hose, gauges, and
air&gas controls - all constructed of the toughest materials, withstanding
nature's meanest elements. Our engineers took extra care that these
products would have as few moving parts as possible - knowing that this
feature will keep them operating far longer than most and make them a
snap to service.
Indicator
Scuba Yoke
Handwheel
Guage
Bleed ValveCheck Valve
Petcock
L-Factor Relief Valve
A product so reliable yet so
fairly priced that it is
destined to rise above other
industry favorites. This
Pressure Relief Valve has
proven to be:
ŸDurableŸ StoutŸResistant To Harsh
ElementsŸEasy To Maintain
Testing has shown that it can
withstand thousands of cycles
without leaking-by or
drifting. The body is
constructed of high tensile,
hard coated aluminum, while
all whetted areas are
corrosion resistant materials
such as stainless steel or
plastic resin. The inlet fitting
comes standard with 1/4”
npt-male threads but can be
easily swaped for Boss or
Metric versions.
Plenty of attention has been
paid to details such as:
Ÿ Polished EdgesŸ Pre-Taped Pipe ThreadsŸ Inclusion of Safety WireŸ 12 Month Warranty
For more information, please
contact customer service at:(305) 430-0550 or via email:[email protected]
RELIEF VALVEVL-530131-TH
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
www.Lawrence-Factor.com 05/2015 - Page 43
Bleed & Flow Valves
VL-530112-BE
6000 psi
In-Line Globe Valve, 1/4" NPT-F (In), 1/4" NPT-M (Out)
Item No.
Fits / Rating
VL-530112-PM
6000 psi
In-Line Globe Valve, 1/4" NPT-F (In), 1/4" NPT-M (Out), panel mount
Item No.
Fits / Rating
VL-530115-TE
6000 psi
Petcock Bleeder, 1/4" NPT-M (In)
Item No.
Fits / Rating
VL-530118-TE
6000 psi
In-Line Bleeder, 1/4" NPT-F (In/Out)
Item No.
Fits / Rating
VL-530119-TE
6000 psi
In-Line Bleeder, 1/4" NPT-F (In), 1/4" NPT-M (Out)
Item No.
Fits / Rating
VL-531120-TE
6000 psi
Bleeder Petcock w/ Stem, 1/4" NPT-M (In)
Item No.
Fits / Rating
VL-531121-TE
6000 psi
Bleeder Petcock w/ Stem, 1/4" BSP-M (In)
Item No.
Fits / Rating
Check Valves
VL-530120-TE
6000 psi
Check Valve, 1/4" NPT-F (In/Out)
Item No.
Fits / Rating
VL-530121-TE
6000 psi
Check Valve, #6 Boss-M (In/Out)
Item No.
Fits / Rating
VL-530122-TE
6000 psi
Check Valve, 1/4" NPT-M (In/Out)
Item No.
Fits / Rating
VL-530123-TE
6000 psi
Check Valve, 1/4" NPT-M (In), #6 Boss-M (Out)
Item No.
Fits / Rating
VL-530124-TE
6000 psi
Check Valve, 1/4" NPT-F (In), 1/4" NPT-M (Out)
Item No.
Fits / Rating
Cylinder Charging
FB-006112-DIN
5000 psi
Handwheel & Nipple Din Filler, 1/4" NPT-M (In)
Item No.
Fits / Rating
SERVICE ITEMS
Page 44 - 05/2015 Products That Purify High PSI Air & Gas
FB-006112-MQ
5000 psi
Handwheel & Nipple, w/ Flow Control Orifice (Canadian Standard), CGA 347, 1/4" NPT-M (In)
Item No.
Fits / Rating
FB-006112-MT
5000 psi
Handwheel & Nipple, CGA 347, 1/4" NPT-M (In)
Item No.
Fits / Rating
FI-0000612-MT
4500 psi
Hex Nut w/ Nipple, CGA 347, 1/4" NPT-M (In)
Item No.
Fits / Rating
VL-530113-BD
3500 psi
Scuba Yoke w/ Bleed, 1/4" NPT-F (In)
Item No.
Fits / Rating
VL-530150-TD
3500 psi
Scuba Yoke without Bleeder, 1/4" NPT-F (In)
Item No.
Fits / Rating
Fittings
FI-0001414-HT
6000 psi
Coupling, #6 Boss (In/Out)
Item No.
Fits / Rating
FI-00EV-3H
6000 psi
Adapter, #6 Boss-M, 1/4" NPT-F
Item No.
Fits / Rating
Gauges
GG-531005-TG
0-7500 psi
Pressure Gauge, 1/4" NPT-Lower Inlet
Item No.
Fits / Rating
GG-531105-TG
0-7500 psi
Pressure Gauge, 1/4" NPT-Back Inlet
Item No.
Fits / Rating
GG-531205-TG
0-6000 psi
Pressure Gauge, 1/4" NPT-Lower Inlet
Item No.
Fits / Rating
GG-531305-TG
0-6000 psi
Pressure Gauge, 1/4" NPT-Back Inlet
Item No.
Fits / Rating
Hoses & Tubing
TU-530008-AC
850 psi
High Pressure Tubing, 1/8" OD, Plastic
Item No.
Fits / Rating
TU-530010-TF
5000 psi
High Pressure Tubing, 6 mm OD, 304 Stainless Steel
Item No.
Fits / Rating
SERVICE ITEMS
www.Lawrence-Factor.com 05/2015 - Page 45
TU-530012-AC
2000 psi
High Pressure Tubing, 12 mm OD, Aluminum
Item No.
Fits / Rating
TU-530013-PE
6000 psi
High Pressure Tubing, 1/8" OD, Superflex
Item No.
Fits / Rating
TU-530015-BA
6000 psi
High Pressure Hose, Breathing Air, Custom Length
Item No.
Fits / Rating
TU-530015-PF
5000 psi
High Pressure Hose, Assembly, Custom Length
Item No.
Fits / Rating
TU-530016-TE
6000 psi
High Pressure Tubing, 1/8" OD, 304 Stainless Steel
Item No.
Fits / Rating
TU-530017-TF
5000 psi
High Pressure Tubing, 1/4" OD, 304 Stainless Steel
Item No.
Fits / Rating
TU-530018-TF
5000 psi
High Pressure Tubing, 3/8" OD, 304 Stainless Steel
Item No.
Fits / Rating
Indicators
GI-531920-AG
6000 psi
Eyeball Indicator, 1/4" NPT-F, w/ H2O element (or CO/H2O upon request)
Item No.
Fits / Rating
GI-532020-AG
6000 psi
Eyeball Indicator, #6 Boss-F, w/ H2O element (or CO/H2O upon request)
Item No.
Fits / Rating
Manifolds
MN-530014-AF
5000 psi
Manifold, 5 ports, 1/4" NPT-F
Item No.
Fits / Rating
MN-530019-AF
5000 psi
Manifold, 7 ports, 1/4" NPT-F
Item No.
Fits / Rating
Priority Valves
VL-530110-AF
6000 psi
Priority Valve - economy version, 1/4" NPT-F (In/Out), 50 SCFM
Item No.
Fits / Rating
VL-530141-TG
7000 psi
Priority Valve - deluxe version, 1/4" NPT-M (In), 1/4" NPT-F (Out), with S/S Seat/Check Valve, 75 SCFM
Item No.
Fits / Rating
SERVICE ITEMS
Page 46 - 05/2015 Products That Purify High PSI Air & Gas
Relief Valves
VL-530111-AF
300 to 6000 psi
Relief Valve, 1/4" NPT-M, 50 SCFM @ 1500 psi / 100 SCFM @ 3000 psi
Item No.
Fits / Rating
VL-530130-TH
1000 to 5000 psi
Relief Valve, 1/4" NPT-M, 50 SCFM
Item No.
Fits / Rating
VL-530131-TH
1000 to 7000 psi
Relief Valve, 1/4" NPT-M, 50 SCFM
Item No.
Fits / Rating
VL-530132-TH
1000 to 5000 psi
Relief Valve, 3/8" BSPT- M, 50 SCFM
Item No.
Fits / Rating
Service Kit for Bleed & Flow Valves
RK-534140-SF
Tip, for Bleeder & Petcock Valves
Item No.
Fits / Rating Lawrence Factor®
Service Kit for Cartridge Holders
SK-101003-BC
O-ring Set, for Standard Cartridge Holder
Item No.
Fits / Rating Allied Air® 2333
SK-146702-BC
O-ring Set, for Alkin®
Item No.
Fits / Rating Alkin® 6702-19
SK-147047-BC
O-ring Set, for Alkin®
Item No.
Fits / Rating Alkin® 7047-13
SK-220026-HS
Service Kit, for FC-220029-SB (61860)
Item No.
Fits / Rating Bauer® 61860
SK-222203-BC
O-ring Set, for Standard Cartridge Holder
Item No.
Fits / Rating Bauer® N4735 & N4736
SK-222205-BC
O-ring Set, for Bauer® PO Style Cartridge Holder
Item No.
Fits / Rating Bauer® N04568
SK-222206-BC
O-ring Set, for Bauer® Jumbo Style Cartridge Holder
Item No.
Fits / Rating 17455/56
SK-242403-BC
O-ring Set, for Standard Cartridge Holder
Item No.
Fits / Rating Air Dry®
SERVICE ITEMS
www.Lawrence-Factor.com 05/2015 - Page 47
SK-272701-BC
O-ring Set, for American Bristol® Style Cartridge Holder
Item No.
Fits / Rating AB230861
SK-303003-BC
O-ring Set, for Standard Cartridge Holder
Item No.
Fits / Rating LFI 30 Style Holder
SK-353501-BC
O-ring Set, for Standard Cartridge Holder
Item No.
Fits / Rating Fluid PAC2333
SK-363601-BC
O-ring Set, for Standard Cartridge Holder
Item No.
Fits / Rating Eagle® 50-L310
SK-444402-BC
O-ring Set, for 44 Style Cartridge Holder
Item No.
Fits / Rating Aero Dri® 5815
SK-535306-BB
O-ring Set, for 53 Style Cartridge Holder
Item No.
Fits / Rating Lawrence Factor®
SK-535306-VT
O-ring Set, for 96 Style Cartridge Holder
Item No.
Fits / Rating Lawrence Factor®
SK-535310-BB
O-ring Set, for Mechanical Filter Housing
Item No.
Fits / Rating Lawrence Factor®
SK-535394-BB
Quad Seal, for Specialty Cartridge Holder
Item No.
Fits / Rating Lawrence Factor®
SK-600020-BB
O-ring Set, for 60 Style Cartridge Holder
Item No.
Fits / Rating Lawrence Factor®
SK-650101-NS
Final Separator Maintenance Kit (New Style)
Item No.
Fits / Rating Lawrence Factor®
SK-650101-OS
Final Separator Maintenance Kit (Old Style)
Item No.
Fits / Rating Lawrence Factor®
SK-656503-BC
O-ring Set, for Standard Cartridge Holder
Item No.
Fits / Rating Mako® M310
SK-727202-BC
O-ring Set, for Standard Cartridge Holder
Item No.
Fits / Rating Robbins Aviation®
SERVICE ITEMS
Page 48 - 05/2015 Products That Purify High PSI Air & Gas
Service Kit for Check Valves
GK-530200-SF
Soft Goods Kit, for Check Valve
Item No.
Fits / Rating Lawrence Factor®
RK-530200-HS
Complete Service Kit, for Check Valve
Item No.
Fits / Rating Lawrence Factor®
Service Kit for Indicators
EL-531926-RA
H2O Indicator Capsule, for Eyeball Indicator
Item No.
Fits / Rating Lawrence Factor®
EL-532453-RH
CO Button & H2O Ring- 10%, for Eyeball Indicator
Item No.
Fits / Rating NA
EL-652653-OO
CO Button & H2O Ring- 40%, for Eyeball Indicator
Item No.
Fits / Rating Mako® M7414
GK-530023-SF
Soft Goods Kit, for Eyeball Indicator
Item No.
Fits / Rating Lawrence Factor®
Service Kit for In-Line Filter Holders
EL-534051-E
2 Micron Element, for In-Line Filter Holder
Item No.
Fits / Rating Lawrence Factor®
EL-534051-G
10 Micron Element, for In-Line Filter Holder
Item No.
Fits / Rating Lawrence Factor®
Service Kit for Priority Valves
RK-530201-HS
Complete Service Kit, for Priority Valve
Item No.
Fits / Rating VL-530110-AF
RK-530210-HS
Complete Service Kit, for Priority Valve
Item No.
Fits / Rating VL-530141-TG
Service Kit for Relief Valves
RK-530202-HS
Complete Service Kit, for Relief Valve
Item No.
Fits / Rating VL-530111-AF
RK-530203-HS
Complete Service Kit, for Relief Valve
Item No.
Fits / Rating VL-530130-TH
SERVICE ITEMS
www.Lawrence-Factor.com 05/2015 - Page 49
RK-530204-HS
Poppet, for Relief Valve
Item No.
Fits / Rating VL-530131-TH
SERVICE ITEMS
Page 50 - 05/2015 Products That Purify High PSI Air & Gas
The pedigree of each Lawrence Factor purity agent stems from the selection
of chemistry we employ in our power packed filter cartridges. After the many
years of study, the immeasurable hours of performance testing in the real
world, and the unmatched expertise of Lawrence Factor that went into
developing these agents-you can feel confident that you are choosing a
product that's able to perform to your highest standards.
Our sorbents target and capture specific molecules in a web of atomic
magnets, effectively eliminating even the minutest traces of undesired
substance from your air&gas stream. Choose from a range of desiccants,
catalysts, and carbons each formulated to perform under a specific set of
conditions-and all packaged in a variety of sizes with long-term shelf life in
mind.
We also offer a selection of lubes and cleansing agents-all designed to work
in concert and enhance the performance of your air&gas purification
equipment. Naturally, every product coming from Lawrence Factor is of the
highest grade and the highest purity.
HI-PURITY SORBENTS & AGENTS
EXTENSIVE RESEARCH BY THE PURITY MASTERS AT LAWRENCE FACTOR HAS RESULTED IN SOME OF
THE FINEST AND MOST POWERFUL PURIFICATION AGENTS AVAILABLE FOR COMPRESSED AIR&GAS
SYSTEMS. EACH BEING FORMULATED TO PERFORM AT THE HEIGHTS OF PRESSURE, UNDER THE
TOUGHEST CONDITIONS, AND IS PRODUCED USING THE RIGID QUALITY CONTROLS THAT HAVE MADE
L-FACTOR THE MOST RESPECTED NAME IN HI-PSI PURIFIED AIR&GAS.
Formulated for Breathing Apparatus Technicians - L.F.W. allows for rapid cleansing of:
Ÿ SCUBA RegulatorsŸ ValvesŸ Parts
Dirt, corrosion, silicone, grease, salt deposits, and a host of other grimy substances are no match for the dissolving power of L.F.W. Simply immerse the object to be cleaned and watch as dirt just flakes right off. Because it will not harm rubber, entire assemblies can be soaked for easy disassembly. L.F.W. performs best when used in an ultrasonic cleaning unit but also works well by itself or in solution with mild heat.
One pint of L.F.W. will make as many as 300 valve assemblies absolutely gleam. That means they can cost as little as three-cents each to clean.
Lubricating OilsLawrence Factor lubricating oils
have been created expressly for
breathing air & gas compression
systems.
SecoLube is:Ÿ Low FoamingŸ Provides Excellent
Separation From AirŸ Has a high flash point.
Economically priced to offer you
considerable savings in
application and installation costs,
SecoLube should be at the heart
of your purification process.
Molecular Sieve 3A
Molecular Sieve 13X
Activated Carbon
Silica Gel
Activated AluminaDesicant Blend
SecoLubeTM
Lawrence Factor Wash
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
FILTER REFERENCE GUIDE
The filter reference guide below can help you understand all the components and meanings of Lawrence Factors filter numbering system.
CHEMICAL SYMBOLS
AA = Activated Alumina
AC = Activated Carbon
BX = Blend / MS 13X & Silica Gel
HOP = Hopcalite or Monoxycon
4A = Molecular Sieves 4A
13X = Molecular Sieves 13X
SG = Silica Gel
SOME COMMON FORMULAS
13x 13x
AC
13x
HOP
AC
AC AA HOP
AC
AC
67 62 24 22 25 44
X10248
AP-1
X-pendableX-pendable® ®
our cartridge
oem number
retention springtop / plugorange spacer
chemical media
life band
nipple / fitting
particulate pads
CARTRIDGE NUMBER
X 2410
X-p
endable
Bra
nd
Filte
r St
yle
Chem
ical Form
ula
Length
Desi
gnati
on
8
UNDERSTANDING LAWRENCE FACTORS FILTER NUMBERS
X 65 24 7 vs. X 65 24 0
Ÿ 65 - Filter Style The same on both filters.
Ÿ 24 - Chemical Formula The same on both filters.
Ÿ 0 vs 7 - Length Designation Different on both filters.
Conclusion: Both filters are the same style and the same chemical formula. Since they have different length designations, they are NOT interchangeable.
X 65 24 7 vs. X 65 67 7
Ÿ 65 - Filter Style The Same on both filters.
Ÿ 24 vs 67 - Chemical Formula Different on both filters.
Ÿ 7 - Length Designation The same on both filters.
Conclusion: Both filters are the same style and length. Though they both fit the same tower, the chemical formulas are different. One is a dryer only and the other is a fill purifier.
LENGTH DESIGNATION
0 = 10” 5 = 25” 7 = 27” 8 = 18” 9 = 8” 12 = 9” 14 = 14”
www.Lawrence-Factor.com 05/2015 - Page 51
Desiccant Blend* An economy product, carefully blended mixture of Molecular Sieves 4a and Silica Gel Desiccant. Best at adsorbing water vapors and droplets. This 50/50 blend is very popular among processors of high volumes of air and gas. It is recommended to apply this reagent ONLY as a gas drying strata with first exposure to the gas stream.
0Uses Include: Water droplet absorption and water vapor adsorption to 140 F.
Silica Gel Desiccant* Gel Desiccant is a moderately powerful media best at adsorbing water vapors and droplets. Gel Desiccant finds good use in applications at atmospheric or low pressures and at low temperatures. It is recommended to apply this reagent ONLY as a gas drying media with first exposure to the gas stream.
0Uses Include: Water droplet adsorption and water vapor adsorption to 125 F.
Alumina Desiccant* Alumina Desiccant is a moderately powerful media best at adsorbing water vapors and droplets. Alumina Desiccant finds good use in applications at low pressures and at
0temperatures below 150 F. It is recommended to apply this reagent ONLY as a gas drying media with first exposure to the gas stream.
0Uses Include: Water droplet adsorption and water vapor adsorption to 150 F.
Molecular Sieves 3A & 4A* Molecular Sieves 4A is a highly powerful media best at adsorbing water vapors and droplets. Substances in the hydrocarbon groups also have an affinity towards Molecular Sieves 4A although water has a stronger bond within most gas applications. It is recommended to apply this reagent ONLY as a gas drying media with first exposure to the gas stream.
0Uses Include: Water droplet adsorption and water vapor adsorption to 125 F. Best used for drying CNG without removing the mercaptins.
Molecular Sieves 13X*TM
Vaporshell brand Molecular Sieves 13X is our highest grade of desiccant reagent.
TMVaporshell is at least four times more powerful than other desiccants, especially when approaching use
TMat higher temperatures. Vaporshell can hold up to 1/4 of its own weight in water and also has capacities for hydrocarbons, carbon dioxide, and
TMother organics. Vaporshell may be applied as a reagent in gas purifying, alone or with a compound bed of appropriate medias.
0Uses Include: Water droplet adsorption and water vapor adsorption to 225 F.
Activated Carbon** Activated Carbons are among the most powerful available. Their high density provide low dust and high capacity characteristics. These reagents are quite effective at absorbing oil droplets and vapors, as well as, hydrocarbons, organics, and halogenated solvents. It is recommended to apply this reagent ONLY after the gas stream has been thorough dehydrated.
Uses Include: Adsorption of oil droplets, oil vapors, hydrocarbons, and hologenated solvents.
Monoxycon Catalyst** Where carbon monoxide is a concern,
TM Monoxycon catalyst is the solution. Commonly employed within breathing air systems, this reagent catalytically converts “deadly” carbon monoxide to less harmful carbon dioxide. The gas
0stream must be dehydrated to levels below -50 F TMprior to entering the Monoxycon media. The higher
the levels of carbon dioxide - present after treatment - must be removed with an adsorption reagent such
TMas Vaporshell
Uses Include: Catalytic conversion of Carbon Monoxide.
Descriptions of Lawrence Factor Filter Reagents
*DO NOT REGENERATE media once contaminated with substances other than water.**DO NOT REGENERATE this media.
Your compressor is as vital to your operation as the air that feeds it. And
it’s with that same vitality that New Parts produces world-class
replacement parts for it. With our New Parts collection of products we
make it a snap to keep any high-pressure compressor performing at its
best or better. That means that no matter which brand compressor you
own, or if you own a number of brands, you have only to make one stop
to find everything you need.
A bit unsure that you are choosing the correct part? With our cross-fits
index our catalog makes it easy to locate the exact New Part you need.
Have a question or need advice? Simple - phone us and one of our
customer service representatives are at your service.
HI-PSI REPLACEMENT COMPRESSOR PARTS
SOMETIMES, IT’S NOT CONVENIENT OR EASY TO OBTAIN THE ORIGINAL MANUFACTURER’S
REPLACEMENT PARTS. OFTEN, ALTERNATIVES ARE NOT ECONOMICAL. FREQUENTLY, YOU WANT
COMPONENTS THAT ARE A LITTLE BETTER QUALITY THAN WHAT IS GENERALLY AVAILABLE.
THAT IS WHY THERE ARE NEW PARTS - HIGH PERFORMANCE AFTERMARKET SPARES.
Our Floating PistonsAfter 5 years in development and
2 years of testing, you can take TMconfidence in New Part floating
pistons. The engineering
competes well against the OEM
design - having been made of the
newest generation of materials
and within highly critical
tolerances.
The liner is built of the same
material as used in high-
performance racing engines -
able to:
Ÿ Displace High Heat LoadsŸ Resist WearŸ Continually Provide A
Film Of Lubrication.
Tests have shown the piston
keeps on running in the liner
even at reduced oil pressures.
The piston pin is produced to:
Ÿ Aircraft engine specificationsŸ Carefully heat treated so that
it’s outer shell is hard and it’s center soft - resisting impact & shock. Ÿ Lastly, it is rotationally
ground and finished within micro thousandths of an inch.
All of this enables the piston &
liner to pair up when
withstanding terrific work forces
and producing extreme
pressures.
To find a New Parts dealer
near you, contact:[email protected]
or 305-430-0550. New Parts
a brand you can trust!
Cooling SystemGaskets, Seals and O-rings
Valve Heads
Belts
Pistons & Rings
Gauges
Bearings
and so much more!
All of this . . .
Our New Parts division manufactures high performance spare parts to fit many brands of hi-psi compressors and at the same level of quality,
availability, and support you are used to from Lawrence Factor.
TM
Hi-Performance Parts for Hi-PSI Compressors
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
Page 52 - 05/2015 Products That Purify High PSI Air & Gas
Adsorbents
Activated Carbon (Adsorbent)
Item No. Size Net. Wt.
For pollution control - this media is your choice for adsorbing both condensable and vaporous hydrocarbons (lubricants). Our carbon is also quite effective in cornering odors, organics, as well as halogenated solvents.
Composition
8 x 12 Mesh Granules
Application
Breathing Air Purification & Gas Sweetening
CA-252606-GN Pint 0.5 lb.
CA-252612-GN Quart 1 lb.
CA-252615-GN Gallon 3.5 lb.
CA-252625-GN 2-1/2 Gallons 8.75 lb.
CA-252655-GN 55 Gallon Drum 200 lb.
WARNING:
Some of the ingredients in Activated Carbon are harmful and anyone handling this material must take proper measures to protect respiratory systems and avoid immediate contact with skin, eyes, and mouth. MSDS is available upon request.
Catalysts
Monoxycon (Catalysts)
Item No. Size Net. Wt.
Where Carbon Monoxide is a concern, Monoxycon is the solution. At levels up to 300 ppm, this media will convert "deadly" carbon monoxide to less harmful Carbon Dioxide.
Composition
8 x 12 Mesh Granules
Application
Breathing Air Purification
CH-265706-GN Pint 1 lb.
CH-265712-GN Quart 2 lb.
CH-265715-GN Gallon 8 lb.
WARNING:
Some of the ingredients in Monoxycon are harmful and anyone handling this material must take proper measures to protect respiratory systems and avaoid immediate contact with skin, eyes, and mouth. MSDS is available upon request.
Desiccants
Molecular Sieve 13X - Vaporshell (Desiccant)
Item No. Size Net. Wt.
Vaporshell™ 13x is up to four times more powerful than other desiccants - especially at elevated (up to 120° F) temperatures. It can adsorb up to 23 % of its own weight in water and reach down to - 102° F dewpoint.
Composition
1/16" to 1/8" Spheres
Application
Breathing Air & Laboratory Gas Dehydration
CF-244206-SR Pint 0.75 lb.
CF-244212-SR Quart 1.25 lb.
CF-244215-SR Gallon 5.5 lb.
CF-244225-SR 2-1/2 Gallons 13.5 lb.
CF-244250-SR 55 lb Drum 55 lb.
CF-244255-SR 55 Gallon Drum 300 lb.
WARNING:
Some of the ingredients in Vaporshell™ are harmful and anyone handling this material must take proper measures to protect respiratory systems and avoid immediate contact with skin, eyes, and mouth. MSDS is available upon request.
Molecular Sieve 3A (Desiccant)
Item No. Size Net. Wt.
A highly powerful desiccant - best at adsorbing water vapors and droplets - can soak up 20% of its own weight in water and reach very low dewpoints with added capacities for hydrocarbons, carbon dioxide, and other organics.
Composition
1/8" to 1/4" Spheres
Application
CNGV, Industrial, & Lab. Gas Dehydration
CF-244012-PL Quart 1.25 lb.
CF-244015-PL Gallon 5.5 lb.
CF-244025-PL 2-1/2 Gallons 13.5 lb.
CF-244055-PL 55 Gallon Drum 300 lb.
WARNING:
Some of the ingredients in Molecular Sieves 3A are harmful and anyone handling this material must take proper measures to protect respiratory systems and avoid immediate contact with skin, eyes, and mouth. MSDS is available upon request.
PURITY AGENTS
www.Lawrence-Factor.com 05/2015 - Page 53
Molecular Sieve 4A (Desiccant)
Item No. Size Net. Wt.
A highly powerful desiccant - best at adsorbing water vapors and droplets - can soak up to 20% of its' own weight in water and reach very low dewpoints with added capacities for hydrocarbons, carbon dioxide, and other organics.
Composition
1/16" to 1/8" Spheres
Application
Industrial & Laboratory Gas Dehydration
CF-244112-SR Quart 1.25 lb.
CF-244115-SR Gallon 5.5 lb.
CF-244125-SR 2-1/2 Gallons 13.5 lb.
CF-244155-SR 55 Gallon Drum 300 lb.
WARNING:
Some of the ingredients in Molecular Sieves 4a are harmful and anyone handling this material must take proper measures to protect respiratory systems and avoid immediate contact with skin, eyes, and mouth. MSDS is available upon request.
Activated Alumina (Desiccant)
Item No. Size Net. Wt.
A mid-strength media best at sponging up water, condensables & vapors. It is good in applications operating at lower pressures & at temperatures below 100° F. Highly durable & resistant to liquid cracking. Preferred for use as a water buffer.
Composition
1/8" to 1/4" Spheres
Application
Industrial Air and Gas Dehydration
CF-242212-SR Quart 2 lb.
CF-242215-SR Gallon 8 lb.
CF-242225-SR 2-1/2 Gallons 20 lb.
WARNING:
Activated Alumina may cause irritation to eyes and upper respiratory tract due to dust exposure. MSDS is available upon request.
Desiccant Blend (Desiccant)
Item No. Size Net. Wt.
Designed as an economy product - carefully blended Molecular Sieves with Silica Gel Desiccant - it results in a media that is excellent at adsorbing water condensables, droplets, and vapors at an economical cost.
Composition
1/6" to 1/4" Spheres / Pellets
Application
Breathing Air & Laboratory Gas Dehydration
CF-245012-SR Quart 1.25 lb.
CF-245015-SR Gallon 5.5 lb.
CF-245025-SR 2-1/2 Gallons 13.5 lb.
WARNING:
Some of the ingredients in Desicant Blend are harmful and anyone handling this material must take proper measures to protect respiratory systems and avoid immediate contact with skin, eyes, and mouth. MSDS is available upon request.
Silica Gel (Desiccant)
Item No. Size Net. Wt.
Robust and sturdy - terrific at squeezing water liquids, droplets, and vapors from compressed gases. A workhorse at low temperatures and pressures.
Composition
1/6" to 1/8" Spheres
Application
Industrial Gas Dehydration
CF-242512-SR Quart 2 lb.
CF-242515-SR Gallon 8 lb.
CF-242525-SR 2-1/2 Gallons 20 lb.
WARNING:
Some of the ingredients in Silica Gel are harmful and anyone handling this material must take proper measures to protect respiratory systems and avoid immediate contact with skin, eyes, and mouth. MSDS is available upon request.
Lubricants & Solvents
Aero Lube™ (Lubricant)
Item No. Size Net. Wt.
Pure and clean - Aero Lube™ is a jelly - like grease which is ideal for lubricating o-rings and threaded parts in sterile or breathing air systems.
Composition
Transparent Silicone Jelly
Application
Lubrication
CL-581202-PT 2 oz. 2 oz.
WARNING:
Avoid heating above 290°C. MSDS is available upon request.
PURITY AGENTS
Page 54 - 05/2015 Products That Purify High PSI Air & Gas
Oxy Lube (Lubricant)
Item No. Size Net. Wt.
Safe with oxygen or in use with oxygen handling equipment - Oxy Lube™ is a paste like compound which is inert in Oxygen atmospheres. Great for lubricating seals and moving parts such as valve stems.
Composition
Paste Like Compound
Application
Lubrication of Seals & Mechanical Parts
CL-581002-PT 2 oz. 2 oz.
WARNING:
Avoid heating above 290°C. MSDS is available upon request.
Seco Lube™ 200 - Food Grade, Synthetic (Lubricant)
Item No. Size Net. Wt.
It's a polyalphaolefin-based premium Food Grade Synthetic Lubricant. It is the choice of many for use in their compressors for producing Nitrox mixed air. It complies with FDA H-1 specifications. SecoLube™ 200 is non toxic with a high flash point.
Composition
Synthetic Hydrocarbon
Application
High Pressure Air Compressors
CL-581215-LQ Gallon 10 lb.
WARNING:
Do Not mix with other oils. Exercise care in use with some hoses, seals, paint, and similar compounds as synthetic oil may not be compatible (incompatible: neoprene, SBR rubber, low nitrile Buna, PVC, and ABS). MSDS is available upon request.
Seco Lube™ 500 - Synthetic Oil (Lubricant)
Item No. Size Net. Wt.
Provides extended protection against carbonizing & corrosion with excellent separation from air & reduced foaming tendencies. Recommended for demanding use in high pressure air compressors while remaining safe for breathing air applications.
Composition
Di-Ester Liquid
Application
High Pressure Air Compressors
CL-581812-LQ Quart 3 lb.
CL-581815-LQ Gallon 8 lb.
CL-581850-LQ 5 Gallon 40 lb.
CL-581855-LQ 55 Gallon 440 lb.
WARNING:
Do Not mix with other oils. Exercise care in use with some hoses, seals, paint, and similar compounds as synthetic oil may not be compatible (incompatible: neoprene, SBR rubber, low nitrile Buna, PVC, and ABS). MSDS is available upon request.
Seco Lube™ 550 - Natural Oil (Lubricant)
Item No. Size Net. Wt.
Protects against carbonizing and corrosion with excellent separation from air - reducing foaming tendencies. Recommended for demanding use in high pressure air compressors while remaining safe for breathing air applications.
Composition
Petroleum Liquid
Application
High Pressure Air Compressors
CL-581512-LQ Quart 3 lb.
CL-581515-LQ Gallon 8 lb.
CL-581555-LQ 55 Gallon 440 lb.
WARNING:
Do Not mix with other oils. Exercise care in use with some hoses, seals, paint, and similar compounds as synthetic oil may not be compatible (incompatible: neoprene, SBR rubber, low nitrile Buna, PVC, and ABS). MSDS is available upon request.
Seco Lube™ 800 - Tri Blend (Lubricant)
Item No. Size Net. Wt.
A triester blended lubriant of exceptional quality, high in the standards for anti-wear, low in carbon build up and a great self-cooling lubricant. Great for compressors in high temperature, hot running areas and extreme conditions.
Composition
Synthetic Triester
Application
High Pressure Air Compressors
CL-581715-LQ Gallon 8 lb.
WARNING:
Do Not mix with other oils. Exercise care in use with some hoses, seals, paint, and similar compounds as synthetic oil may not be compatible (incompatible: neoprene, SBR rubber, low nitrile Buna, PVC, and ABS). MSDS is available upon request.
L.F.W.™ Concentrate (Cleanser)
Item No. Size Net. Wt.
Service Solvent - for scuba valves and regulators. Dismantling and cleaning diving apparatus is quite easy with LFW™. It works swiftly and requires little "elbow grease"; blasting away dirt, salt deposits, corrosion, silicone grease, and most grimy substances.
Composition
Solvent
Application
Scuba Valves & Regulators
CM-763206-CN Pint 2 lb.
CM-763212-CN Quart 3 lb.
CM-763215-CN Gallon 10 lb.
PURITY AGENTS
www.Lawrence-Factor.com 05/2015 - Page 55
WARNING:
Do Not use LFW™ with aluminum, plastics, or ferrus materials. Some plastic & aluminum items will deteriorate when exposed to LFW™. This could result in failure of breathing apparatus. Use only with brass, stainless steel, and rubber materials. Professional use by trained technicians only. Contains toxic and acetic ingredients. Not for consumer use. MSDS is available upon request.
Particulate Pads
Particulate Sheet
Item No. Size Net. Wt.
Particulate pads are white round polyester filter disk which vary in size. They prevent passage of large dust and media particles.
Composition
Polyester
Application
High Pressure Air Compressors
FF-007706-PE 36" x 36" 1 Sheet
FF-007725-PE 1.19" x 0.25" 12 Pack
FF-007744-PE 2.25" x 0.25" 12 Pack
FF-007745-PE 4.5" x 0.25" 12 Pack
FF-007746-PE 1.63" x 0.25" 12 Pack
FF-007747-PE 1.75" x 0.25" 12 Pack
FF-007756-PE 2.75" x 0.25" 12 Pack
FF-007766-PE 2.5" x 0.25" 12 Pack
FF-007795-PE 1" x 0.25" 12 Pack
FF-007796-PE 2" x 0.25" 12 Pack
FF-007797-PE 3" x 0.25" 12 Pack
FF-007798-PE 4" x 0.25" 12 Pack
WARNING:
There are no known physical or health hazards associated with this product. MSDS is available upon request.
PURITY AGENTS
Page 56 - 05/2015 Products That Purify High PSI Air & Gas
Desiccant Blend* An economy product, carefully blended mixture of Molecular Sieves 4a and Silica Gel Desiccant. Best at adsorbing water vapors and droplets. This 50/50 blend is very popular among processors of high volumes of air and gas. It is recommended to apply this reagent ONLY as a gas drying strata with first exposure to the gas stream.
0Uses Include: Water droplet absorption and water vapor adsorption to 140 F.
Silica Gel Desiccant* Gel Desiccant is a moderately powerful media best at adsorbing water vapors and droplets. Gel Desiccant finds good use in applications at atmospheric or low pressures and at low temperatures. It is recommended to apply this reagent ONLY as a gas drying media with first exposure to the gas stream.
0Uses Include: Water droplet adsorption and water vapor adsorption to 125 F.
Alumina Desiccant* Alumina Desiccant is a moderately powerful media best at adsorbing water vapors and droplets. Alumina Desiccant finds good use in applications at low pressures and at
0temperatures below 150 F. It is recommended to apply this reagent ONLY as a gas drying media with first exposure to the gas stream.
0Uses Include: Water droplet adsorption and water vapor adsorption to 150 F.
Molecular Sieves 3A & 4A* Molecular Sieves 4A is a highly powerful media best at adsorbing water vapors and droplets. Substances in the hydrocarbon groups also have an affinity towards Molecular Sieves 4A although water has a stronger bond within most gas applications. It is recommended to apply this reagent ONLY as a gas drying media with first exposure to the gas stream.
0Uses Include: Water droplet adsorption and water vapor adsorption to 125 F. Best used for drying CNG without removing the mercaptins.
Molecular Sieves 13X*TM
Vaporshell brand Molecular Sieves 13X is our highest grade of desiccant reagent.
TMVaporshell is at least four times more powerful than other desiccants, especially when approaching use
TMat higher temperatures. Vaporshell can hold up to 1/4 of its own weight in water and also has capacities for hydrocarbons, carbon dioxide, and
TMother organics. Vaporshell may be applied as a reagent in gas purifying, alone or with a compound bed of appropriate medias.
0Uses Include: Water droplet adsorption and water vapor adsorption to 225 F.
Activated Carbon** Activated Carbons are among the most powerful available. Their high density provide low dust and high capacity characteristics. These reagents are quite effective at absorbing oil droplets and vapors, as well as, hydrocarbons, organics, and halogenated solvents. It is recommended to apply this reagent ONLY after the gas stream has been thorough dehydrated.
Uses Include: Adsorption of oil droplets, oil vapors, hydrocarbons, and hologenated solvents.
Monoxycon Catalyst** Where carbon monoxide is a concern,
TM Monoxycon catalyst is the solution. Commonly employed within breathing air systems, this reagent catalytically converts “deadly” carbon monoxide to less harmful carbon dioxide. The gas
0stream must be dehydrated to levels below -50 F TMprior to entering the Monoxycon media. The higher
the levels of carbon dioxide - present after treatment - must be removed with an adsorption reagent such
TMas Vaporshell
Uses Include: Catalytic conversion of Carbon Monoxide.
Descriptions of Lawrence Factor Filter Reagents
*DO NOT REGENERATE media once contaminated with substances other than water.**DO NOT REGENERATE this media.
Your compressor is as vital to your operation as the air that feeds it. And
it’s with that same vitality that New Parts produces world-class
replacement parts for it. With our New Parts collection of products we
make it a snap to keep any high-pressure compressor performing at its
best or better. That means that no matter which brand compressor you
own, or if you own a number of brands, you have only to make one stop
to find everything you need.
A bit unsure that you are choosing the correct part? With our cross-fits
index our catalog makes it easy to locate the exact New Part you need.
Have a question or need advice? Simple - phone us and one of our
customer service representatives are at your service.
HI-PSI REPLACEMENT COMPRESSOR PARTS
SOMETIMES, IT’S NOT CONVENIENT OR EASY TO OBTAIN THE ORIGINAL MANUFACTURER’S
REPLACEMENT PARTS. OFTEN, ALTERNATIVES ARE NOT ECONOMICAL. FREQUENTLY, YOU WANT
COMPONENTS THAT ARE A LITTLE BETTER QUALITY THAN WHAT IS GENERALLY AVAILABLE.
THAT IS WHY THERE ARE NEW PARTS - HIGH PERFORMANCE AFTERMARKET SPARES.
Our Floating PistonsAfter 5 years in development and
2 years of testing, you can take TMconfidence in New Part floating
pistons. The engineering
competes well against the OEM
design - having been made of the
newest generation of materials
and within highly critical
tolerances.
The liner is built of the same
material as used in high-
performance racing engines -
able to:
Ÿ Displace High Heat LoadsŸ Resist WearŸ Continually Provide A
Film Of Lubrication.
Tests have shown the piston
keeps on running in the liner
even at reduced oil pressures.
The piston pin is produced to:
Ÿ Aircraft engine specificationsŸ Carefully heat treated so that
it’s outer shell is hard and it’s center soft - resisting impact & shock. Ÿ Lastly, it is rotationally
ground and finished within micro thousandths of an inch.
All of this enables the piston &
liner to pair up when
withstanding terrific work forces
and producing extreme
pressures.
To find a New Parts dealer
near you, contact:[email protected]
or 305-430-0550. New Parts
a brand you can trust!
Cooling SystemGaskets, Seals and O-rings
Valve Heads
Belts
Pistons & Rings
Gauges
Bearings
and so much more!
All of this . . .
Our New Parts division manufactures high performance spare parts to fit many brands of hi-psi compressors and at the same level of quality,
availability, and support you are used to from Lawrence Factor.
TM
Hi-Performance Parts for Hi-PSI Compressors
Aftermarket Use: X-pendable filter cartridges, New Parts compressor parts, and many other items depicted in the pages are intended and sold for aftermarket use only. Part numbers, graphics, photos, trade names, and corresponding printed matter are not intended to imply that any items in this Catalog (or Websites) are original brand (OEM) products. Although the quality of most of the items listed herein equals or exceeds the performance of the original brand, none of these items are manufactured or associated with, sponsored by, approved by, nor endorsed by the original manufacturer. Lawrence Factor in no way represents itself or it's products to be related to the OEM or their brands.
WARNING: Use of Lawrence Factor products in the OEM’s equipment could void the original warranty.
www.Lawrence-Factor.com 05/2015 - Page 57
BearingsLike the joints in your wrist, a compressors bearings are key to its’ motion. In the case of a hi-psi compressor they rotate at super high speeds, as much as 2000 RPM, generating incredible levels of friction and heat.
TMHere’s why New Part bearings will endure:
Ÿ Contact surfaces are ground to Micro Finishes & tolerances of 0.00001”.Ÿ Materials are tempered to matching
hardness. This ensures reduced frictional wear and long lasting bearings.Ÿ Bearing races are designed so as to
facilitate ease of compressor re-assembly.
Pistons and Piston Rings2At reciprocating speeds of up to 2400ft /sec fps - you can imagine the
inertial thrust that a piston must withstand. In the case of a piston in a hi-psi compressor - add top end pressures of over 6000 psi, friction generated at (as much as) 2000 cycles per minute, and temperatures at over 400 degrees.
Like the pistons that carry them, piston rings are seeing some of the toughest operating conditions in the compressor - high speeds, great friction, and sweltering temperatures. Acting as a seal against the cylinder wall - the ring prevents compressed gas from escaping through the backside of the piston, hence building pressure instead. Meanwhile, it’s important that the rings carry a film of lubricating oil but not so much as to act like an oil pump. They have to wipe away any debris but without scoring or damaging the cylinder wall. It’s a demanding job.
TMHere’s why New Part pistons rings will endure those demands:
Ÿ Phosphate or Chromed Coatings facilitate long shelf life, longer running lives, corrosion resistance, and better wear properties.Ÿ Tightest Possible Ring Gaps reduce “blow-by”
- thus gaining maximum output of compressed air/gas. Even after cylinders begin to show signs of wear - the rings still have sufficient expansion potential without the ring-gap opening beyond acceptable limits.
Gaskets, Seals, and O-ringsA seal is much more than just a slice of paper or a strip of rubber. Somerubbers will dissolve in synthetic oils, and some papers will deteriorateunder pressure. So many factors must be considered when designing aseal. - factors such as:Ÿ FitŸ Operating ConditionsŸ Exposure to Corrosives - especially longevity
Because that seal needs to hold up until the next service intervalTMsometimes decades. New Part gaskets & seals will endure - here are
the reasons:Ÿ Gasket materials are the sturdiest
available.Ÿ Materials that resist shrinkage &
warping during storage & some of which are reinforced for extra resistance to the forces of gas pressure.Ÿ Complicated shapes are cut to
exacting dimensions using laser guided cutters and jets.Ÿ All rubber parts are selected for appropriate hardness, material,
and ability to resist exposure to corrosives.
ValvesCompressor Valves operate at very high speeds and under extremes of temperature, impact, and corrosives. Valves have to endure relentless
TMhours of abuse without giving up - here are the reasons New Part valves will endure:
Ÿ Materials are selected based on ruggedness; materials whose performance characteristics are further ENHANCED BY THERMAL TEMPERING AND ADDING SURFACE COATINGS.Ÿ All RUNNING EDGES ARE POLISHED in
order to prevent “hang up” of interfacing parts. This also facilitates smooth gas flow and disables carbon from depositing.
TMNaturally, New Part valves are designed to perform exceptionally well.But just as importantly . . . they are designed to INSTALL EXCEPTIONALLYEASILY - helping you to Do-It-Yourself, without exception.
Valve HeadsLike the cylinder head on any machine - a compressor head fitted to a
®Bauer Compressor expects to do a ton of grunt work. And “ton”accurately sums up the load that the head must bear - many tons, infact. And when you consider that some high-pressure heads work at upto 6000 psi - that’s as much as 3 tons of force on every square inch of
TMsurface! Here are the reasons New Part valve heads will endure thatforce:
Ÿ Created of SOLID INGOT OF AEROSPACEALUMINUM - by precision machining rather than less solid casting methods.Ÿ All THREADED AREAS ARE SPUN INTO THE
HEAD by tool interpolation. This allows us to maintain thread accuracy much better than using a tap, which is subject to wear. Every single thread is then checked with an inspection gauge.Ÿ In many cases, hard coatings are applied
to outer surfaces. THIS “SKIN” PROMOTES LONGER LIFE DUE TO RESISTANCE AGAINST CORROSION AND GAULING.
Service KitsWhether your compressor is in need of a tune up or a complete
overhaul, our kits make it easier.
Ÿ They include every necessary part to perform the entire job. Ÿ Nothing is left to chance. Ÿ You only order one part
number.
For help and advice contact
our customer service department or visit our website at:
www.Compressor-Parts.com
When ordering kits, be sure to let us know the make, model, vintage,
and serial number for your compressor.
Glossary of Breathing Air Termsreprinted from the High pressure Breathing Air Handbook
with permission from Breathing Air Systems
ABSOLUTE PRESSURE: The atmospheric pressure, at sea level is 14.7 psi (actually 14.69 psi.) A pressure gauge, at sea level, would, of course, read ZERO. There remains this same 14.7 psi difference between absolute pressure and gauge pressure, at any pressure.
ACFM or ACTUAL CUBIC FEET PER MINUTE: This is the measurement of a compressor's static cfm output, with the back-pressure on the compressor held constant at a certain pressure. When the ACFM is measured with the compressor working against its highest intended working pressure, a true comparison of the compressor's efficiency can be made. Another term used for this measurement is FREE AIR DELIVERY, (FAD), at a stated back-pressure.
ABSORB: This speaks to the property of a media placed in the compressor's purification system. A media which ABSORBS a contaminant actually soaks it up and draws it within itself, much as a sponge absorbs water.
ADSORB: This is the property of a material which has the propensity to collect a contaminant by means of causing it to adhere to its outer surface.
ACDS, (AUTOMATIC CONDENSATE DRAIN SYSTEM): By means of an electric timer, a solenoid valve is momentarily energized every 15-18 minutes of operation, and each of the system's separators automatically drained of accumulated liquid. Without this feature, the operator must manually drain the separators four times during each hour of operation. The ACDS is a very convenient feature, and also provides assurance that the separators will be drained. The consequences of the failure to timely drain these separators are mechanical damage to the compressor, or the disabling of the system's purification system, through saturation. However, the ACDS itself requires regular monitoring and routine maintenance.
ACTIVATED CARBON: Charcoal obtained by the destructive distillation of vegetable matter and important as an adsorbent of gases and vapors.
AFTERCOOLER: Heat exchangers used for the cooling of the air after it leaves the final stage of the compressor. With air-cooled compressors, the aftercooler is usually a length of finned tubing, coiled in the flow of the cooling air.
AIR CONTROL PANEL: May be wall-mounted, but is more typically associated with the fill station. Valves, gauges, and regulators are mounted in the air control panel to regulate and control the flow to and from the storage bank, fill hoses, etc. While extremely elaborate air control panels are often used, it is my opinion that the most “basic” design that will accomplish the need is usually the best approach. Most system operators appreciate an air control system that is straight-forward and easy to think through.
AIR-COOLED COMPRESSORS: This design incorporates a fan or blower which directs a high-flow stream of air over the compressor block, heads, intercoolers, and aftercooler.
AIR FLOW: Usually measured in cubic feet per minute, (CFM), in our applications; generally used to speak of the output of a compressor or the amount of air flowing through a line. It can be measured with a flow meter, or by means of timing the flow of a known quantity of air.
AIR LINE RESPIRATOR: This describes a breathing system in which the user is provided air through an air line, or “umbilical” hose. Most often, the pressure in this hose is no more than 75-125 psi. The air can be supplied with a compressor, or from a bank of storage cylinders, (with the pressure reduced by a regulator to the required line pressure), or a combination of both. For extremely long runs of hose, using these relatively low pressures, larger hose interior diameters must sometimes be used. Consult the hose manufacturer for these recommendations. Air-line respirators differ from respirators in that an air supply is involved; generally, the description of a respirator means only a face mask with attached filter canisters.
AIR PURITY ANALYSIS: Usually conducted in a laboratory, where test conditions can be carefully controlled. (The NFPA recommends the use of only accredited laboratories). The laboratory usually provides the apparatus with which the air sample is taken and shipped. Upon completion of the test, the laboratory usually provides a print-out of all of the constituents of the air, and, if it meets all of the standards, a certificate. If the sample fails the analysis, the laboratory sometimes can suggest the means of correcting the situation which caused it. Since MOISTURE CONTENT is not a stated factor of most air purity standards, some laboratories will not test for moisture except as an extra cost. Even so, the compressor owner must insist on a moisture measurement. The NFPA currently recommends at least four air purity tests each year.
AMBIENT: Surrounding, encircling, encompassing. The air surrounding you can be called the ambient air. The temperature in a room where a compressor is located can be called the ambient temperature. Humidity and pressure can also be referred to as ambient, at a given location.
BLEEDER VALVE: Usually smaller than a line valve, this valve is most commonly used to bleed the trapped air from a line or vessel. For example, when the supply valve to a pressurized fill line is closed, and the full cylinder's valve is closed, the bleeder valve, positioned between the two, will relieve the pressure from the fill hose, so that an easier disconnection of the filler attachment can be made. Sometimes also referred to as a PURGE valve.
BLOCK: Used within the industry to describe the assembly comprised of the compressor crankcase with cylinders, cylinder heads, intercoolers, aftercooler, interstage separators, interstage safety relief valves, and drive pulley attached. With low pressure compressors, this assembly is more often called the HEAD.
BOOSTER PUMP: A one or two stage closed-loop mini-compressor which is capable of accepting air at a lower pressure and boosting it to a higher pressure. These are available powered by an electric motor, or powered by 100-150 psi of air pressure. The majority of those in service are of the latter type, utilizing a fraction of the supply air for power, making them completely self-contained.
BURST DISC: This is descriptive of a one-time safety device, typically built into cylinder valves. Instead of a spring-loaded poppet valve, it is a disc of frangible metal, (often copper, or an alloy thereof), held in place over an orifice. The size of this orifice and the strength of the disc are such that the disc will burst, at a certain predetermined pressure. This design burst pressure is usually 5/3, (166%), of the cylinder's working pressure. Once
Page 58 - 05/2015 Products That Purify High PSI Air & Gas
Auto Condensate Drain
Fits Bauer Compressor®
NP-2220-0127A
Solenoid Valve, ACD (12 vdc), Fits N16381
Item No.
Part That Fits:
FUNCTION/RATING: 2-way, 12vdc, 1/2NPT.INCLUDES: Din connector.TIP/NOTE: Rebuild kit and replacement coils are available separately.
N16381
NP-2220-0128A
Solenoid Valve, ACD (115 vac), Fits N16382
Item No.
Part That Fits:
FUNCTION/RATING: 2-way, 115vac, 1/2NPT.INCLUDES: Din connector.TIP/NOTE: Rebuild kit and replacement coils are available separately.
N16382
NP-2220-0587A
Timer, Drain (115 vac), Fits TMR8
Item No.
Part That Fits:
TMR-0008
NP-2220-0838A
Solenoid, ACD (220 vac / 60 hz), Fits N16383
Item No.
Part That Fits:
FUNCTION/RATING: 2 way valve, 220vac/60Hz coil.INCLUDES: DIN connector.
N16383
NP-2222-0153A
Solenoid Coil, ACD (115 vac), Fits N04182
Item No.
Part That Fits:
N04182
NP-2222-0170A
Solenoid Coil, ACD (12 vdc), Fits N04185
Item No.
Part That Fits:
N04185
NP-2222-0195A
Piston, ACD, Fits 064003
Item No.
Part That Fits:
REQUIRED: U-cup seal (NP-2202-0156A).ORIGIN: 100% made in USA.
064003
NP-2222-0207A
Seat, ACD, Fits 064005
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
064005
NP-2222-0524A
Piston, ACD (for 66004) Fits 060417
Item No.
Part That Fits:
REQUIRED: U-cup seal (NP-2202-0537A) and o-ring (NP-2202-0504A).ORIGIN: 100% made in USA.
060417
NP-2222-0525A
Piston, ACD, Fits 057628
Item No.
Part That Fits:
REQUIRED: U-cup seal (NP-2202-0537A) and o-ring (NP-2202-0504A).ORIGIN: 100% made in USA.
057628
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 59
NP-2222-0526A
Piston, ACD, Fits 057629 (for 61010)
Item No.
Part That Fits:
REQUIRED: U-cup seal (NP-2202-0537A) and o-ring (NP-2202-0504A).ORIGIN: 100% made in USA.
057629
NP-2222-0535A
Silencer Muffler, ACD. Fits SEP-0016
Item No.
Part That Fits:
SEP-0016
NP-2222-0564A
Silencer Tank, ACD, Fits TNK-0068
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
TNK-0068
NP-2222-0565AK
Silencer Assembly Kit, ACD
Item No.
Part That Fits:
INCLUDES: Pressure dampener, silencer, fluid collector, fittings, and connections.ORIGIN: 100% made in USA.
TNK-0068-KIT
NP-2222-0710A
Seat, ACD, Fits 056687
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
056687
NP-2222-0711A
Seat, ACD, Fits 056691
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
056691
NP-2222-0712A
Seat, ACD, Fits 060419
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
060419
NP-2222-0853A
Solenoid Coil, ACD (240 vac), Fits N04181
Item No.
Part That Fits:
N04181
NP-2222-1031A
ACD Install Kit, PO system
Item No.
Part That Fits:
FUNCTION/RATING: Facilitates installation of New Parts ACD onto "PO" filter system.INCLUDED: Adapters, tee-fitting, tube loop, check valve.ORIGIN: Made in USA.
Bearings
Fits Bauer Compressor®
NP-2203-0046A
Bearing, roller. Fits N00169.
Item No.
Part That Fits:
N00169
COMPRESSOR PARTS
Page 60 - 05/2015 Products That Purify High PSI Air & Gas
NP-2203-0144A
Bearing, split ball. Fits N02857.
Item No.
Part That Fits:
N02857
NP-2203-0179A
Bearing. Fits N03703, N02638.
Item No.
Part That Fits:
N03703 N02638
NP-2203-0180A
Bearing. Fits N03702.
Item No.
Part That Fits:
N03702
NP-2203-0184A
Bearing. Fits N03015.
Item No.
Part That Fits:
N03015
NP-2203-0185A
Bearing, ball. Fits N03014.
Item No.
Part That Fits:
N03014 N01014 N00525
NP-2203-0186A
Bearing, roller. Fits N00583.
Item No.
Part That Fits:
N00583
NP-2203-0187A
Bearing, ball. Fits N00091 (for oil pump)
Item No.
Part That Fits:
N00091
NP-2203-0188A
Bearing. Fits N00633.
Item No.
Part That Fits:
N00633
NP-2203-0189A
Bearing. Fits N00475.
Item No.
Part That Fits:
N00475
NP-2203-0387A
Bearing, roller. Fits N15406.
Item No.
Part That Fits:
N15406
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 61
NP-2203-0467A
Bearing. Fits N18303,
Item No.
Part That Fits:
N18303
NP-2203-0468A
Bearing. Fits N18304.
Item No.
Part That Fits:
N18304
Belts
Fits Bauer Compressor®
NP-2218-0097A
Belt, timing. Fits N02874 (for oil drive)
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N02874
NP-2218-0101A
Belt, vee. Fits N03173, BET-0136. (for oil drive)
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N03173 BET-0136
NP-2218-0116A
Belt, vee. Fits N04159. (for oil drive)
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N04159
NP-2218-0133A
Belt, vee. Fits N02003. (for fan drive)
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N02003
NP-2218-0469A
Belt, vee. Fits BET-0172.
Item No.
Part That Fits:
RECOMMENDED: 1 spare
N16620 BET-0172
NP-2218-0998A
Belt, vee. Fits BET-0019.
Item No.
Part That Fits:
BET-0019
NP-2218-1001A
Belt, vee. Fits BET-0046
Item No.
Part That Fits:
BET-0046
Control Valves
Fits Bauer Compressor®
NP-2215-0209A
Relief valve, Fits 010670 (8 bar / 115 psi)
Item No.
Part That Fits:
INCLUDES: Gasket.ORIGIN: 100% made in USA.
010670 081802
COMPRESSOR PARTS
Page 62 - 05/2015 Products That Purify High PSI Air & Gas
NP-2215-0210A
Relief valve, Fits 011656 (50 bar / 725 psi)
Item No.
Part That Fits:
INCLUDES: Gasket.ORIGIN: 100% made in USA.
011656
NP-2215-0366A
Relief valve, Fits 072935 (60 bar / 870 psi)
Item No.
Part That Fits:
INCLUDES: Gasket.ORIGIN: 100% made in USA.
072935
NP-2215-0367A
Relief valve, Fits 010253, 012885 (24 bar / 350 psi)
Item No.
Part That Fits:
INCLUDES: Gasket.ORIGIN: 100% made in USA.
010253 012885 014090 081810
NP-2215-0368A
Relief valve, Fits 012886 (80 bar / 1150 psi)
Item No.
Part That Fits:
INCLUDES: Gasket.ORIGIN: 100% made in USA.
012886
NP-2215-0369A
Relief valve, Fits 010254 (18 bar / 260 psi)
Item No.
Part That Fits:
INCLUDES: Gasket.ORIGIN: 100% made in USA.
010254 081807
NP-2215-0381A
Relief valve, Fits 010255 (5.5 bar / 80 psi)
Item No.
Part That Fits:
INCLUDES: Gasket.ORIGIN: 100% made in USA.
010255 081801
NP-2215-0500A
Relief valve, Fits 078706 (95 bar / 1377 psi)
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
078706
NP-2215-0991A
Relief valve assembly & kit, Fits 059410, 061114
Item No.
Part That Fits:
FUNCTION/RATING: This is a kit to replace the OEM valve. Field adjustable 1000-5000psi (100-350bar).INCLUDES: All materials to install in place of original valve. O-rings, tie-down bolts, instructions.
059410 061114 067797
NP-2215-1200A
Relief valve, Fits 81804 (10 bar / 145 psi)
Item No.
Part That Fits:
81804
VL-530132-TH
Relief Valve, 3/8" BSPT-M (In), 1000 - 5200 psi, Fits 003063, 011523, 065410
Item No.
Part That Fits:
003063 011523 065410
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 63
Cooling System, Heat Exchangers, Fans
Fits Bauer Compressor®
NP-2204-0360A
Fan blade (for model K15, K180) Fits 055460
Item No.
Part That Fits:
RECOMMENDED: 18 spares.TIP/NOTE: One set is 18 pieces.
055460
NP-2204-0360AK
Fan blade (for Model K15, K180) Fits 055460 (18 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 18 pieces.
055460
NP-2204-0361A
Fan blade (for model K14) Fits 055459
Item No.
Part That Fits:
RECOMMENDED: 18 spares.TIP/NOTE: One set is 18 pieces.
055459
NP-2204-0361AK
Fan blade (for Model K14) Fits 055459 (18 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 18 pieces.
055459
NP-2206-0669A
Intercooler (for K14.6, 1st stage) Fits 014744
Item No.
Part That Fits:
TIP/NOTE: No brackets included.ORIGIN: 100% made in USA.
014744
NP-2206-0670A
Intercooler (for K14.6, 2nd stage) Fits 014745
Item No.
Part That Fits:
TIP/NOTE: No brackets included.ORIGIN: 100% made in USA.
014745
NP-2206-0671A
Intercooler (for K14.6, 3rd stage) Fits 014746
Item No.
Part That Fits:
TIP/NOTE: No brackets included.ORIGIN: 100% made in USA.
014746
NP-2206-0674A
Intercooler, Fits 014624, 056716 (for U, C. M. 1st stage)
Item No.
Part That Fits:
TIP/NOTE: No brackets included.ORIGIN: 100% made in USA.
014624 056716
NP-2206-0675A
Pre-cooler, Fits 069978, 055697 (for M, 1st stage)
Item No.
Part That Fits:
ALSO REQUIRED: Union fitting.ORIGIN: 100% made in USA.
055697 069978
NP-2206-0677A
Intercooler, Fits 058991, 058992, 056717, 014625
Item No.
Part That Fits:
TIP/NOTE: No brackets included.ORIGIN: 100% made in USA.
058991 058992 056717 014625
COMPRESSOR PARTS
Page 64 - 05/2015 Products That Purify High PSI Air & Gas
NP-2206-0680A
Connecting tube (for U, 1st stg) Fits 014901, 069988
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
014901 069988
NP-2206-0681A
Connecting tube, Fits 014902, 069957 (for C 1 stage)
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
014902 069957
NP-2206-0683A
Connecting tube (for K14.6 2nd stage) Fits 014101
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
014101
NP-2206-0684A
Connecting tube (for K14.6 3rd stage) Fits 014103
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
014103
NP-2206-0685A
Connecting tube (for K14.7 1st stage) Fits 064363
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
069892 064363
NP-2206-0686A
Intercooler (for K14.7, 2nd stage) Fits 064357
Item No.
Part That Fits:
TIP/NOTE: No brackets included.ORIGIN: 100% made in USA.
064357
NP-2206-0687A
Intercooler (for K14.7, 3rd stage) Fits 064359
Item No.
Part That Fits:
TIP/NOTE: No brackets included.ORIGIN: 100% made in USA.
064359
NP-2206-0688A
Connecting tube (for K14.7 2nd stage) Fits 069893, 064364
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
069893 064364
NP-2206-0689A
Connecting tube (for K14.7 3rd stage) Fits 064365
Item No.
Part That Fits:
FUNCTION/RATING: Connects separator to final head.ORIGIN: 100% made in USA.
064365 069894
NP-2206-0697A
Connecting tube (for M, 2nd stg) Fits 058249
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
058249 069959
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 65
NP-2206-0721A
Connecting pipe (K15, 3rd Stage) Fits 014056, 072776
Item No.
Part That Fits:
FUNCTION/RATING: Connects seperator to final head.ORIGIN: 100% made in USA.
072776 014056
NP-2206-0886A
Intercooler (Purus-I, 2nd - 3rd stage) Fits 014546-2
Item No.
Part That Fits:
FUNCTION/RATING: 2nd to 3rd stage intercooler.TIP/NOTE: This individual tube is usually sold as part of cooling assembly.ORIGIN: 100% made in USA.
014546-2
NP-2206-0887A
Intercooler (Purus-I, 1st - 2nd) Fits 014546-1
Item No.
Part That Fits:
FUNCTION/RATING: 1st to 2nd stage intercooler.TIP/NOTE: This individual tube is usually sold as part of cooling assembly.ORIGIN: 100% made in USA.
014546-1
NP-2206-0888A
Connecting Tube, Fits 014000 (for M, 2nd Stage)
Item No.
Part That Fits:
014000
NP-2206-0893A
Connecting tube, Fits 014054, 072774 (K15-2 to 3)
Item No.
Part That Fits:
014054 072774
NP-2206-1018A
Intercooler (Varius) Fits 059400
Item No.
Part That Fits:
059400
NP-2206-1041A
Intercoller, fits 060456,069938(U-10 1st Stage)
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
069938 060456
Cylinders
Fits Bauer Compressor®
NP-2209-0566A
Cylinder (for 2nd Stage) Fits 062477
Item No.
Part That Fits:
REQUIRED: Cylinder base gasket or o-ring.
062477
Electrical Components
Fits Bauer Compressor®
NP-2220-0138A
Switch, air pressure. Fits SWT-0160.
Item No.
Part That Fits:
FUNCTION/RATING: Adjustable range 3650-7500 PSI. Has EMT electrical connection w/ wire leads.TIP/NOTE: SWT-0160-1 (NP-2220-0541A) has Din electrical connection
SWT-0160
COMPRESSOR PARTS
Page 66 - 05/2015 Products That Purify High PSI Air & Gas
NP-2220-0139A
Switch, oil pressure. Fits SWT-0119.
Item No.
Part That Fits:
FUNCTION/RATING: Adjustable range 360-1700psi. Has EMT electical connection w/ leads.
SWT-0119
NP-2220-0382A
Sensor, high temperature. Fits SWT-0015. (N/C)
Item No.
Part That Fits:
FUNCTION/RATING: Pre-wired for normally closed circuit. Has leads and spade coupler & 8-32 stud end. Maximum 12amps.ORIGIN: 100% made in USA.
SWT-0015
NP-2220-0541A
Switch, air pressure (for DIN connector) Fits SWT-0160-1, SWT-257
Item No.
Part That Fits:
FUNCTION/RATING: Adjustable range 3000-7500 psi.INCLUDES: DIN connector.
SWT-0160-1 SWT-257
NP-2220-0542A
Switch, oil pressure (for DIN connector) Fits SWT-0119-1
Item No.
Part That Fits:
FUNCTION/RATING: Adjustable range 22.6-125 psi.INCLUDES: DIN connector.
SWT-0119-1
NP-2220-0622A
Hour meter (90 - 240 volt) Fits HMR-0001, HMR-0021, N16625
Item No.
Part That Fits:
FUNCTION/RATING: Analog hour meter. Operates on a range of ac/dc voltages (90-240, 50/60Hz).REQUIRES: 2" mounting hole.
HMR-0001 N16625 DV/HMR HMR-0021
NP-2220-0659A
Hour meter, LCD (10 - 270 volt) Fits HMR-5, HMR-0020
Item No.
Part That Fits:
FUNCTION/RATING: Indicates run time in hours/minutes. 7mm LCD. 2.8" face. 10-270volt ac/dc.REQUIRED: 2" hole.
HMR-0005 HMR-0020
NP-2220-0797A
Switch, air pressure, Fits N01010, SWT-0055
Item No.
Part That Fits:
FUNCTION/RATING: Air pressure switch. 1000-4500psi adjustable.TIP/NOTE: Box type enclosure.
N01010 SWT-0055
NP-2220-0801A
Switch, oil pressure (for DIN connector) Fits SWT-0258
Item No.
Part That Fits:
FUNCTION/RATING: Oil pressure switch. 360-1700psi adjustable.TIP/NOTE: DIN type connector.
SWT-0258
NP-2220-0814A
Sensor, high temperature (N/O) Fits SWT-0006
Item No.
Part That Fits:
FUNCTION/RATING: Normally (N/O) open switch. Closes on rise at 320F degree. 5mm stud.INCLUDED: 2-spade connector.ORIGIN: 100% made in USA.
SWT-0006
Fasteners
Fits Bauer Compressor®
NP-2205-0075A
Acorn nut. Fits N00084.
Item No.
Part That Fits:
N00084
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 67
NP-2205-0076A
Bolt, allen cap. Fits N00109, SCR-0179.
Item No.
Part That Fits:
N00109 SCR-0179
NP-2205-0076AK
Bolt, allen cap. Fits N00109, SCR-0179. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N00109 SCR-0179
NP-2205-0077A
Bolt, allen cap. Fits: N00123, SCR-0181.
Item No.
Part That Fits:
N00123 SCR-0181
NP-2205-0077AK
Bolt, allen cap. Fits N00123, SCR-0181. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N00123 SCR-0181
NP-2205-0078A
Bolt, allen cap. Fits N00150.
Item No.
Part That Fits:
N00150 SCR-0139
NP-2205-0078AK
Bolt. allen cap. Fits N00150. SCR-0139. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces..
N00150 SCR-0139
NP-2205-0079A
Bolt, allen cap. Fits N00171, SCR-0159.
Item No.
Part That Fits:
N00171 SCR-0159
NP-2205-0079AK
Bolt. allen cap. Fits N00150, SCR-0139. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N00171 SCR-0159
NP-2205-0081A
Bolt, allen cap. Fits N00503, SCR-0180.
Item No.
Part That Fits:
N00503 SCR-0180
NP-2205-0081AK
Bolt, allen cap. Fits N0503, SCR-0180. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N00503 SCR-0180
COMPRESSOR PARTS
Page 68 - 05/2015 Products That Purify High PSI Air & Gas
NP-2205-0084A
Bolt, allen cap. Fits N00724, SCR-0133.
Item No.
Part That Fits:
N00724 SCR-0133
NP-2205-0084AK
Bolt, allen cap. Fits N00724, SCR-0133. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N00724 SCR-0133
NP-2205-0085A
Bolt, allen cap. Fits N00861, SCR-0138.
Item No.
Part That Fits:
N00861 SCR-0138
NP-2205-0085AK
Bolt, allen cap. Fits N00861, SCR-0138. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N00861 SCR-0138
NP-2205-0086A
Bolt, allen cap. Fits N01282.
Item No.
Part That Fits:
N01282
NP-2205-0086AK
Bolts, allen cap. Fits N01282. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N01282
NP-2205-0087A
Bolts, allen cap. Fits N01364.
Item No.
Part That Fits:
N01364 SCR-0136
NP-2205-0087AK
Bolt, allen cap. Fits N01364. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N01364 SCR-0136
NP-2205-0089A
Bolt, allen cap. Fits N01776.
Item No.
Part That Fits:
N01776 SCR-0135
NP-2205-0089AK
Bolt, allen cap. Fits N01776. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N01776 SCR-0135
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 69
NP-2205-0102A
Screw, valve tension (for intermediate) Fits N03520
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N03520
NP-2205-0107A
Acorn nut. Fits N03623
Item No.
Part That Fits:
RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
N03623
NP-2205-0108A
Screw, valve tension (for final) Fits 071065, N03624
Item No.
Part That Fits:
N03624 071065
NP-2205-0124A
Bolt, allen cap. Fits N09253.
Item No.
Part That Fits:
N09253
NP-2205-0124AK
Bolts, allen cap. Fits N09253. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Pkg of 6 pieces.
N09253
NP-2205-0177A
Screw, valve tension. Fits 071064.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
071064 N03520
NP-2205-0178A
Screw, valve tension. Fits 071065.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
071065 N03624
NP-2205-0212A
Bolt, allen cap. Fits N02773.
Item No.
Part That Fits:
N02773
NP-2205-0212AK
Bolt, allen cap. Fits N02773. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Pkg of 6 pieces.
N02773
NP-2205-0322A
Bolt, allen cap. Fits N02945, SCR-183.
Item No.
Part That Fits:
N02945 SCR-0183 N01262
COMPRESSOR PARTS
Page 70 - 05/2015 Products That Purify High PSI Air & Gas
NP-2205-0322AK
Bolt, allen cap. Fits N2945, SCR 183. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N02945 SCR-0183 N01262
NP-2205-0341A
Bolt, allen cap. Fits N00796, N02290, N03859.
Item No.
Part That Fits:
N00796 N02290 N03859
NP-2205-0344AK
Washer, flat. Fits N00058, WAS-0021. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N00058 WAS-0021
NP-2205-0345A
Nut. Fits N00289, NUT-0119.
Item No.
Part That Fits:
N00289 NUT-0119
NP-2205-0346AK
Lock washer. Fits N00654. (6 pack)
Item No.
Part That Fits:
INCLUDES: 6 pieces.
N00654
NP-2205-0359A
Stud, cylinder base. Fits N00215.
Item No.
Part That Fits:
N00215
NP-2205-0475A
Bolt, allen cap. Fits N01437, SCR-0182.
Item No.
Part That Fits:
N01437 SCR-0182
NP-2205-0476AK
Lock nut. Fits N00057, N00370, N370, NUT-0062, NUT-0119. (8mm x 1.25, 6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N00057 NUT-0062 N00370 NUT-0119
NP-2205-0490A
Bolt, allen cap. Fits N00354, SCR-0062.
Item No.
Part That Fits:
N00354 SCR-0062
NP-2205-0490AK
Bolt, allen cap screw. Fits N00354, SCR-0062. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N00354 SCR-0062
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 71
NP-2205-0505A
Lock nut. Fits N00644.
Item No.
Part That Fits:
N00644 N03474 NUT-0128
NP-2205-0505AK
Lock nut. Fits N00644. (4 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 4 pieces.
N00644 N03474 NUT-0128
NP-2205-0506A
Bolt, hex cap. Fits N00089, SCR-0025.
Item No.
Part That Fits:
N00089 SCR-0025
NP-2205-0520A
Bolt, allen cap. Fits N00210, SCR-0145.
Item No.
Part That Fits:
N00210 SCR-0145 N03158
NP-2205-0521A
Bolt, hex cap. Fits N03667, SCR-0196.
Item No.
Part That Fits:
N03667 SCR-0196
NP-2205-0522A
Bolt, allen cap. Fits N03407.
Item No.
Part That Fits:
N03407
NP-2205-0523A
Bolt, allen cap. Fits N01040, SCR-0155.
Item No.
Part That Fits:
N01040 SCR-0155
NP-2205-0602AK
Washer, flat. Fits N102, WAS-0024. (6 pack)
Item No.
Part That Fits:
N00102 WAS-0024
NP-2205-0603AK
Lock nut. Fits N1042, NUT-118. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
N01042 NUT-0118 N00287
NP-2205-0604A
Adjusting screw, oil reg. Fits N02969.
Item No.
Part That Fits:
N02969
COMPRESSOR PARTS
Page 72 - 05/2015 Products That Purify High PSI Air & Gas
NP-2205-0605AK
Stud. Fits N24861. (2 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 2 pieces.
N24861
NP-2205-0606AK
Stud. Fits N4615. (2 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 2 pieces.
N04615
NP-2205-0607A
Stud. Fits N15691.
Item No.
Part That Fits:
BAU5, BAU4, BAU3, BAU1
N15691
NP-2205-0616AK
Bolt, hex cap. Fits N01417, SCR-0065, N15797. (2 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 2 pieces.
N01417 SCR-0065 N15797 N19495
NP-2205-0617A
Stud, cylinder base. Fits N04065.
Item No.
Part That Fits:
N04065
NP-2205-0620A
Stud. Fits N04756.
Item No.
Part That Fits:
N04756
NP-2205-0621A
Bolt, allen cap. Fits N01234, SCR-0137.
Item No.
Part That Fits:
N01234 SCR-0137
NP-2205-0703A
Bolt,. Fits N3498, SCR-0051.
Item No.
Part That Fits:
N03498 SCR-0051
NP-2205-0970A
Hex spacer. Fist 005290.
Item No.
Part That Fits:
005290
NP-2205-0978A
Set screw (10 mm) Fits N00003
Item No.
Part That Fits:
N00003
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 73
Filter - Intake (also elements)
Fits Bauer Compressor®
AA-222201-PP
X-tractor Intake, Fits N4823, C64/2
Item No.
Part That Fits:
RECOMMENDED: One spare
N04823
AA-222202-PP
X-tractor Intake, Fits N00070, C711/1
Item No.
Part That Fits:
RECOMMENDED: 1 spare
N00070
AA-222203-PP
X-tractor Intake, fits N03029
Item No.
Part That Fits:
RECOMMENDED: 1 spare
N03029
AA-222204-PP
X-tractor Intake, (for housing 079577) Fits N25950
Item No.
Part That Fits:
FUNCTION/RATING: Air Intake Filter for housing 079577. RECOMMENDED: 1 spare.
N25950 C630
AA-222205-PP
X-tractor Intake, Fits N25886 - Mann C1140
Item No.
Part That Fits:
RECOMMENDED: 1 Spare
N25886
FO-220030-PP
X-tractor Oil, Fits N25326/Gasket, 36-06-006.
Item No.
Part That Fits:
REQUIRED: Rubber Gasket (order NP-2207-0507A). RECOMMENDED: 1 spare
N25326
NP-2221-0056A
Spring, intake housing. Fits 010528.
Item No.
Part That Fits:
010528
NP-2221-0215A
Cover, intake housing. Fits 059433
Item No.
Part That Fits:
TIP/NOTE: Transparent for easy inspection of filter element.ORIGIN: 100% made in USA.
059433
NP-2221-0563A
Intake Filter Housing assembly, Fits 013758.
Item No.
Part That Fits:
INCLUDED: Filter element, clamp, and o-rings.
013758
Filter - Interstage (also elements)
Fits Bauer Compressor®
FC-220029-SB
X-tractor Coalescor, Fits 61860
Item No.
Part That Fits:
TIP/NOTE: Elements FC-220028-SB (061858) and FC-220027-SB (061859) can be purchased seperately.
061860
COMPRESSOR PARTS
Page 74 - 05/2015 Products That Purify High PSI Air & Gas
FC-221020-SB
X-tractor Coalescor, Fits N02726
Item No.
Part That Fits:
N02726
NP-2212-0059A
Seat, petcock. Fits 013283.
Item No.
Part That Fits:
RECOMMENDED: 2 spare.ORIGIN: 100% made in USA.
013283
NP-2212-0074A
Seat, petcock. Fits 064498.
Item No.
Part That Fits:
RECOMMENDED: 2 spare.ORIGIN: 100% made in USA.
064498
NP-2212-0856A
Vortex plate, inter-filter. Fits 012784.
Item No.
Part That Fits:
012784
NP-2212-0857A
Baffle cone, inter-filter. Fits 012785.
Item No.
Part That Fits:
012785
NP-2212-0858A
Center screw, inter-filter. Fits 012786.
Item No.
Part That Fits:
12786
Gaskets, Seals, O-rings
Fits Bauer Compressor®
NP-2202-0010A
Gasket, cylinder base. Fits 003110
Item No.
Part That Fits:
NOTE/TIP: Use film of silicone sealant when installing.ORIGIN: 100% made in USA.
003110
NP-2202-0011A
Gasket, cylinder base. Fits 001866
Item No.
Part That Fits:
NOTE/TIP: Use film of silicone sealant when installing.ORIGIN: 100% made in USA.
001866
NP-2202-0012A
Gasket, cylinder base. Fits 001867
Item No.
Part That Fits:
NOTE/TIP: Use film of silicone sealant when installing.ORIGIN: 100% made in USA.
001867
NP-2202-0014A
Gasket, oil cam cover. Fits 000149
Item No.
Part That Fits:
RECOMMENDED: 1 spare.NOTE/TIP: Use film of silicone sealant when installing.ORIGIN: Made in USA.
000149
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 75
NP-2202-0015A
Gasket, valve seat. Fits 000240
Item No.
Part That Fits:
RECOMMENDED: 2 spares.ORIGIN: Made in USA.
000240
NP-2202-0016A
Gasket, oil pump. Fits 002010
Item No.
Part That Fits:
RECOMMENDED: 1 spare.NOTE/TIP: Use film of silicone sealant when installing.ORIGIN: Made in USA.
002010
NP-2202-0017A
Gasket, cylinder head. Fits 003039
Item No.
Part That Fits:
RECOMMENDED: 1 spare.ORIGIN: Made in USA.
003039
NP-2202-0018A
Gasket, cylinder head. Fits 004466
Item No.
Part That Fits:
RECOMMENDED: 2 spare.ORIGIN: 100% made in USA.
004466
NP-2202-0020A
Gasket, valves. Fits 004675.
Item No.
Part That Fits:
RECOMMENDED: 2 spares.ORIGIN: 100% made in USA.
004675
NP-2202-0021A
Gasket, valves. Fits 005298
Item No.
Part That Fits:
RECOMMENDED: 2 spare.ORIGIN: 100% made in USA.
005298
NP-2202-0022A
Gasket, back plate. Fits 003177.
Item No.
Part That Fits:
REQUIRED: Use film of gasket sealant when installing.ORIGIN: 100% made in USA.
003177
NP-2202-0023A
Gasket, intake manifold. Fits 005523.
Item No.
Part That Fits:
TIP/NOTE: Use film of gasket sealant when installing.ORIGIN: 100% made in USA.
005523
NP-2202-0024A
Gasket, cylinder base. Fits 007862.
Item No.
Part That Fits:
TIP/NOTE: Use film of gasket sealant when installing.ORIGIN: 100% made in USA.
007862
NP-2202-0037A
Gasket, cylinder head. Fits 058262.
Item No.
Part That Fits:
TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
058262
COMPRESSOR PARTS
Page 76 - 05/2015 Products That Purify High PSI Air & Gas
NP-2202-0038A
Gasket, cylinder head. Fits 058545.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
058545
NP-2202-0043A
Gasket. Fits N00002.
Item No.
Part That Fits:
N00002
NP-2202-0044A
Gasket, oil regulator. Fits N00004, N03224.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N00004 N03224
NP-2202-0045A
Seal. Fits N00086.
Item No.
Part That Fits:
N00086
NP-2202-0047A
Seal. Fits N00170.
Item No.
Part That Fits:
N00170
NP-2202-0048A
Seal. Fits N00220.
Item No.
Part That Fits:
N00220
NP-2202-0049A
Gasket, dipstick tube. Fits N01059.
Item No.
Part That Fits:
TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
N01059
NP-2202-0050A
Gasket. Fits N01316.
Item No.
Part That Fits:
RECOMMENDED: 2 spares.ORIGIN: 100% made in USA.
N01316
NP-2202-0052A
O-ring. Fits N02789.
Item No.
Part That Fits:
FUNCTION/RATING: Fits around final exhaust valve.RECOMMENDED: 1 spare.
N02789
NP-2202-0058A
Gasket, lower case. Fits 012386.
Item No.
Part That Fits:
TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
012386
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 77
NP-2202-0060A
O-ring. Fits 013757.
Item No.
Part That Fits:
FUNCTION/RATING: Ensures airtight seal beneath intake filter.RECOMMENDED: 2 spares.TIP/NOTE: Change out when changing intake filter.
013757
NP-2202-0073A
Gasket, cylinder head. Fits 063340.
Item No.
Part That Fits:
TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
063340
NP-2202-0080A
Gasket. Fits N00380.
Item No.
Part That Fits:
N00380
NP-2202-0082A
Seal. Fits N00582.
Item No.
Part That Fits:
N00582
NP-2202-0083A
O-ring. Fits N00638
Item No.
Part That Fits:
FUNCTION/RATING: Seals around inter-stage valves.RECOMMENDED: 2 spares.
N00638
NP-2202-0088A
O-ring, intake pipe. Fits N01539.
Item No.
Part That Fits:
N01539
NP-2202-0090A
O-ring. Fits N02028.
Item No.
Part That Fits:
N02028
NP-2202-0091A
O-ring, suction valve. Fits N02169.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N02169
NP-2202-0092A
O-ring. Fits N02320.
Item No.
Part That Fits:
RECOMMENDED: 2 spares.
N02320
NP-2202-0093A
O-ring. Fits N02507, RNG-0097.
Item No.
Part That Fits:
RECOMMENDED: 2 spares.
N02507 RNG-0097
COMPRESSOR PARTS
Page 78 - 05/2015 Products That Purify High PSI Air & Gas
NP-2202-0095A
O-ring. Fits N02753.
Item No.
Part That Fits:
N02753
NP-2202-0096A
Seal. Fits N02861.
Item No.
Part That Fits:
N02861
NP-2202-0098A
Seal, shaft. Fits N02906, N15067.
Item No.
Part That Fits:
N02906 N15067
NP-2202-0099A
Seal. Fits N03013.
Item No.
Part That Fits:
N03013
NP-2202-0100A
O-ring. Fits N03157.
Item No.
Part That Fits:
RECOMMENDED: 2 spares.
N03157
NP-2202-0103A
O-ring, valve cover. Fits N03521.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N03521
NP-2202-0104A
O-ring, interstage filter. Fits N03556.
Item No.
Part That Fits:
RECOMMENDED: 1 spare
N03556
NP-2202-0109A
Gasket. Fits N03625.
Item No.
Part That Fits:
N03625
NP-2202-0110A
O-ring, backcase. Fits N03705.
Item No.
Part That Fits:
N03705 N19123
NP-2202-0111A
O-ring, breather cover, Fits N03712, N3712.
Item No.
Part That Fits:
N03712
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 79
NP-2202-0112A
O-ring. Fits N03731.
Item No.
Part That Fits:
N03731
NP-2202-0114A
O-ring. Fits N03860, N23753, N23755.
Item No.
Part That Fits:
N03860 N23753 N23755
NP-2202-0115A
O-ring, cylinder base. Fits N04064.
Item No.
Part That Fits:
RECOMMENDED: 2 spares.
N04064
NP-2202-0119A
Gasket, cylinder head. Fits 012228.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
012228
NP-2202-0121A
O-ring, cylinder liner. Fits N04868.
Item No.
Part That Fits:
N04868
NP-2202-0122A
O-ring, cylinder. Fits N04948.
Item No.
Part That Fits:
N04948
NP-2202-0129A
Gasket, demister cover. Fits 006192.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
006192
NP-2202-0131A
Gasket, lower case. Fits 058300.
Item No.
Part That Fits:
TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
058300
NP-2202-0136A
Gasket, cover. Fits 003733.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
003733
NP-2202-0140A
O-ring. Fits N04451, 013756.
Item No.
Part That Fits:
RECOMMENDED: 2 spares.
N04451 013756
COMPRESSOR PARTS
Page 80 - 05/2015 Products That Purify High PSI Air & Gas
NP-2202-0148A
Seal ring, USIT (for ACD) FIts N04602
Item No.
Part That Fits:
RECOMMENDED: One spare.
N04602 N17071
NP-2202-0150A
O-ring. Fits N07091.
Item No.
Part That Fits:
RECOMMENDED: 2 spares.
N07091 RNG-0033
NP-2202-0151A
Gasket, copper. Fits N04051.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N04051
NP-2202-0155A
O-ring. Fits N04496.
Item No.
Part That Fits:
N04496
NP-2202-0156A
Sealing ring. Fits N16269.
Item No.
Part That Fits:
N16269
NP-2202-0157A
O-ring. Fits N04881.
Item No.
Part That Fits:
N04881
NP-2202-0160A
O-ring, filter housing. Fits N04586.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N04586
NP-2202-0161A
O-ring. Fits N01338.
Item No.
Part That Fits:
N01338
NP-2202-0162A
O-ring, oil regulator. Fits N04600.
Item No.
Part That Fits:
N04600
NP-2202-0163A
O-ring. Fits N03732.
Item No.
Part That Fits:
N03732
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 81
NP-2202-0164A
Gasket, drain plug. Fits N01028.
Item No.
Part That Fits:
N01028
NP-2202-0165A
O-ring. Fits N03824.
Item No.
Part That Fits:
RECOMMENDED: 2 spares.
N03824
NP-2202-0166A
O-ring. Fits N04601.
Item No.
Part That Fits:
N04601
NP-2202-0167A
Gasket. Fits 004479.
Item No.
Part That Fits:
004479
NP-2202-0168A
O-ring. Fits N00631.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N00631
NP-2202-0175A
Gasket, cylinder head. Fits 058144.
Item No.
Part That Fits:
TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
058144
NP-2202-0190A
O-ring, backcase. Fits N04653.
Item No.
Part That Fits:
N04653
NP-2202-0213A
O-ring, cylinder base. Fits N04654.
Item No.
Part That Fits:
N04654
NP-2202-0214A
O-ring., Fits 03331, N3331
Item No.
Part That Fits:
N03331
NP-2202-0323A
Gasket. Fits 056983.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
056983
COMPRESSOR PARTS
Page 82 - 05/2015 Products That Purify High PSI Air & Gas
NP-2202-0324A
O-ring. Fits N15204.
Item No.
Part That Fits:
N15204
NP-2202-0325A
O-ring. Fits N15205.
Item No.
Part That Fits:
N15205
NP-2202-0326A
O-ring. Fits N04882.
Item No.
Part That Fits:
N04882
NP-2202-0327A
O-ring. Fits N04146.
Item No.
Part That Fits:
N04146
NP-2202-0328A
Gasket. Fits N00050.
Item No.
Part That Fits:
N00050
NP-2202-0329A
O-ring. Fits N04855.
Item No.
Part That Fits:
N04855
NP-2202-0330A
Gasket. Fits 008263.
Item No.
Part That Fits:
008263
NP-2202-0331A
O-ring. Fits N04877.
Item No.
Part That Fits:
N04877
NP-2202-0332A
O-ring. Fits N04825.
Item No.
Part That Fits:
N04825
NP-2202-0333A
O-ring. Fits N04857.
Item No.
Part That Fits:
N04857
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 83
NP-2202-0334A
Quad ring. Fits N15124.
Item No.
Part That Fits:
N15124
NP-2202-0335A
Gasket. Fits N02714.
Item No.
Part That Fits:
N02714
NP-2202-0336A
O-ring. Fits N03726.
Item No.
Part That Fits:
N03726
NP-2202-0337A
Gasket. Fits 008264
Item No.
Part That Fits:
008264
NP-2202-0338A
O-ring. Fits N16554.
Item No.
Part That Fits:
N16554
NP-2202-0339A
Sealing ring, USIT. Fits N17071.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N17071
NP-2202-0340A
O-ring. Fits N16591.
Item No.
Part That Fits:
N16591
NP-2202-0343A
O-ring, cylinder base. Fits N02639.
Item No.
Part That Fits:
FUNCTION/RATING: For 1st stage cylinder base.
N02639
NP-2202-0351A
Gasket. Fits 009284.
Item No.
Part That Fits:
009284
NP-2202-0365A
O-ring. Fits N25212.
Item No.
Part That Fits:
N25212
COMPRESSOR PARTS
Page 84 - 05/2015 Products That Purify High PSI Air & Gas
NP-2202-0388A
O-ring. Fits N07063.
Item No.
Part That Fits:
N07063
NP-2202-0428A
Gasket, oil pump housing. Fits 078421.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
078421
NP-2202-0429A
Gasket. Fits 067979.
Item No.
Part That Fits:
TIP/NOTE: Use thin film of gasket sealant when installing. ORIGIN: 100% made in USA.
067979
NP-2202-0453A
Seal. Fits N18305.
Item No.
Part That Fits:
N18305 N26281
NP-2202-0454A
Gasket. Fits 061183.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
061183
NP-2202-0455A
O-ring. Fits N03745.
Item No.
Part That Fits:
N03745
NP-2202-0456A
O-ring. Fits N03997.
Item No.
Part That Fits:
N03997
NP-2202-0457A
O-ring. Fits N04058.
Item No.
Part That Fits:
N04058
NP-2202-0458A
O-ring. Fits N04385.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N04385
NP-2202-0459A
O-ring. Fits N04776.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
NO4776
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 85
NP-2202-0460A
O-ring, oil filter. Fits N25327.
Item No.
Part That Fits:
N25327
NP-2202-0462A
Gasket, fill pipe. Fits 012560.
Item No.
Part That Fits:
TIP/NOTE: Use thin film of gasket sealant when installing.ORIGIN: 100% made in USA.
012560
NP-2202-0465A
O-ring. Fits N15133.
Item No.
Part That Fits:
N15133
NP-2202-0472A
O-ring. Fits N15265.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N15265
NP-2202-0477A
O-ring. Fits N02640.
Item No.
Part That Fits:
N02640
NP-2202-0478A
O-ring. Fits N17959.
Item No.
Part That Fits:
N17959
NP-2202-0482A
O-ring. Fits N04566.
Item No.
Part That Fits:
N04566 RNG-0069
NP-2202-0484A
Seal. Fits N00260.
Item No.
Part That Fits:
N00260
NP-2202-0486A
O-ring. Fits N02621.
Item No.
Part That Fits:
N02621
NP-2202-0487A
O-ring. Fits N15093.
Item No.
Part That Fits:
N15093
COMPRESSOR PARTS
Page 86 - 05/2015 Products That Purify High PSI Air & Gas
NP-2202-0489A
O-ring. Fits N4085.
Item No.
Part That Fits:
N04085
NP-2202-0492A
O-ring. Fits N15412.
Item No.
Part That Fits:
N15412
NP-2202-0493A
O-ring. Fits N02485.
Item No.
Part That Fits:
N02485
NP-2202-0494A
O-ring. Fits N15106.
Item No.
Part That Fits:
N15106
NP-2202-0495A
Gasket, copper. Fits N04261, N04163.
Item No.
Part That Fits:
N04163
NP-2202-0496A
Gasket, copper. Fits N00293.
Item No.
Part That Fits:
N00293
NP-2202-0497A
Gasket, copper. Fits 056668.
Item No.
Part That Fits:
056668
NP-2202-0498A
Gasket, copper. Fits N00842.
Item No.
Part That Fits:
N00842
NP-2202-0501A
Gasket, copper. Fits N19368.
Item No.
Part That Fits:
N19368
NP-2202-0503A
Gasket, copper. Fits N02889.
Item No.
Part That Fits:
N02889
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 87
NP-2202-0504A
O-ring. Fits N03489.
Item No.
Part That Fits:
N03489 RNG-0070
NP-2202-0508A
O-ring. Fits N19120.
Item No.
Part That Fits:
N19120
NP-2202-0509A
O-ring. Fits N03951.
Item No.
Part That Fits:
N03951
NP-2202-0510A
O-ring. Fits N04333.
Item No.
Part That Fits:
N04333
NP-2202-0511A
O-ring. Fits N25452.
Item No.
Part That Fits:
N25452
NP-2202-0512A
Seal. Fits N19654.
Item No.
Part That Fits:
N19654
NP-2202-0513A
Seal. Fits N19655.
Item No.
Part That Fits:
N19655
NP-2202-0514A
Seal. Fits N03340.
Item No.
Part That Fits:
N03340
NP-2202-0527A
Seal. Fits N00160.
Item No.
Part That Fits:
N00160
NP-2202-0532A
O-ring. Fits N03165.
Item No.
Part That Fits:
N03165
COMPRESSOR PARTS
Page 88 - 05/2015 Products That Purify High PSI Air & Gas
NP-2202-0533A
O-ring. Fits N19124.
Item No.
Part That Fits:
N19124
NP-2202-0534A
O-ring. Fits N15540.
Item No.
Part That Fits:
N15540
NP-2202-0536A
O-ring. Fits N02720.
Item No.
Part That Fits:
N02720
NP-2202-0537A
Sealing ring, chevron. Fits N04177.
Item No.
Part That Fits:
N04177
NP-2202-0647A
O-ring. Fits N24788.
Item No.
Part That Fits:
N24788
NP-2202-0658A
O-ring. Fits N00062.
Item No.
Part That Fits:
N00062
NP-2202-0693A
O-ring. Fits N04178.
Item No.
Part That Fits:
N04178
NP-2202-0704A
O-ring. Fits N02858
Item No.
Part That Fits:
N02858
NP-2202-0946A
O-ring. Fits N02814.
Item No.
Part That Fits:
N02814
NP-2202-0947A
USIT ring. Fits N04499.
Item No.
Part That Fits:
N04499 N4499
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 89
NP-2202-0985A
Gasket. Fits 061024 100% made in USA
Item No.
Part That Fits:
061024
NP-2202-1008A
O-ring. Fits N 4869.
Item No.
Part That Fits:
N04869
NP-2202-1082A
Gasket, 2nd stg sylnder base. Fits 009285
Item No.
Part That Fits:
Gasket.
009285
NP-2202-1203A
Washer, copper small. Fits relief valve 81804
Item No.
Part That Fits:
NP-2202-1204A
Washer, copper large. Fits relief valve 81804
Item No.
Part That Fits:
Gauges
Fits Bauer Compressor®
NP-2213-0039A
Gauge. panel mount (200 psi). Fits GAU-200.
Item No.
Part That Fits:
FUNCTION/RATING: 0-200psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAU-0200 GAG-0006W
NP-2213-0040A
Gauge, panel mount (600 psi). Fits GAU-600.
Item No.
Part That Fits:
FUNCTION/RATING: 0-600psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAU-0600 GAG-0007W
NP-2213-0041A
Gauge, panel mount (1500 psi). Fits GAU-1500, GAG-00008.
Item No.
Part That Fits:
FUNCTION/RATING: 0-1500psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAU-1500 GAG-0008W GAG0008S
NP-2213-0042A
Gauge, panel mount (7500 psi). Fits GAU-7500.
Item No.
Part That Fits:
FUNCTION/RATING: 0-7500psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAU-7500 GAG-0009W
NP-2213-0481A
Gauge, panel (10,000 psi). Fits GAG-10000, GAU-10000.
Item No.
Part That Fits:
FUNCTION/RATING: 0-10,000psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAG-10000 GAU-10000
COMPRESSOR PARTS
Page 90 - 05/2015 Products That Purify High PSI Air & Gas
NP-2213-0499A
Gauge flange, 3 hole. (for 2 1/2" panel gauge)
Item No.
Part That Fits:
FUNCTION/RATING: For our standard panel gauge. Slips behind front lip in order to convert to 3 hole screw-on flange.
N-A
NP-2213-0722A
Gauge, panel mount. (5000 psi) Fits GAU-5000.
Item No.
Part That Fits:
FUNCTION/RATING: 0-5000psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAU-5000
Kit - Auto Condensate Drain
Fits Bauer Compressor®
NP-2220-0135AK
Kit, solenoid valve. Fits N16382-KIT.
Item No.
Part That Fits:
INCLUDES: Springs, plunger, seals and o-rings.
N16382-KIT KIT-M16382 KIT-N16382
NP-2222-0208AK
Kit, ACD. Fits N05156, N05956. 100% made in USA
Item No.
Part That Fits:
INCLUDED: Soft goods only. Seat, o-rings, and seal.TIP/NOTE: More complete kits available. Consult customer service.ORIGIN: 100% made in USA.
N05156 N05956
NP-2222-0565AK
Silencer Assembly Kit, ACD
Item No.
Part That Fits:
INCLUDES: Pressure dampener, silencer, fluid collector, fittings, and connections.ORIGIN: 100% made in USA.
TNK-0068-KIT
NP-2222-0588AK
Kit, ACD rebuild. (for ACD unit 063760) 100% made in USA
Item No.
Part That Fits:
FUNCTION/RATING: For 3 stage compressor models.INCLUDED: All soft goods, piston(s), solenoid items, and lubricant.ORIGIN: 100% made in USA.
063760-KIT
NP-2222-0589AK
Kit, ACD rebuild. (for ACD unit 063761) 100% made in USA
Item No.
Part That Fits:
FUNCTION/RATING: For 4 stage compressor models.INCLUDED: All soft goods, piston(s), solenoid items, and lubricant.ORIGIN: 100% made in USA.
063761-KIT
NP-2222-0713AK
Kit, ACD rebuild. (for ACD unit N05539 4 stage 20hp+) 100% made in USA
Item No.
Part That Fits:
FUNCTION/RATING: For 4 stage compressor models (20HP+).INCLUDED: All soft goods, piston(s), solenoid items, and lubricant.ORIGIN: 100% made in USA.
N05539
Kit - Bearing
Fits Bauer Compressor®
NP-2203-0403AK
Bearing kit. (for model C)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
NP-2203-0404AK
Bearing kit. (for model M)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 91
NP-2203-0405AK
Bearing kit. (for model K14.6)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
NP-2203-0406AK
Bearing kit. (for model K14.7)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
NP-2203-0407AK
Bearing kit. (for model U)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
NP-2203-0408AK
Bearing kit. (for models UII, CII, MII, IK100, IK120)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
NP-2203-0409AK
Bearing kit. (for model IK12.14-II)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
NP-2203-0450AK
Bearing kit. (for model K15)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
NP-2203-0451AK
Bearing kit. (for model K20, K150, K180)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
NP-2203-0452AK
Bearing kit. (for models V, Ut10, JII)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
NP-2203-0717AK
Bearing kit. (for model P.H)
Item No.
Part That Fits:
INCLUDES: All bearings (main, rod, and rod end), inner races, shims & spacers, shaft seals, and gaskets.
N-A
Kit - Gasket
Fits Bauer Compressor®
NP-2202-0196AK
Gasket & seal kit. Fits N05450 (for model Ut10)
Item No.
Part That Fits:
INCLUDES: All gaskets, seals, o-rings, and gasket sealant.TIP/NOTE: For all vintages.
N05450
COMPRESSOR PARTS
Page 92 - 05/2015 Products That Purify High PSI Air & Gas
NP-2202-0200AK
Gasket & seal kit. Fits N06193. (for models U & C)
Item No.
Part That Fits:
INCLUDES All gaskets, seals, and o-rings.TIP/NOTE: All vintages.
N06193
NP-2202-0201AK
Gasket & seal kit. Fits N06196. (for model M)
Item No.
Part That Fits:
INCLUDES: All gaskets, seals, o-rings, and gasket sealant.TIP/NOTE: Please specify vintage.
N06196
NP-2202-0204AK
Gasket & seal kit. Fits N05451. (for model K14.6)
Item No.
Part That Fits:
INCLUDES: All gaskets, seals, o-rings, and gasket sealant.TIP/NOTE: Only fits modification-6 units.
N05451
NP-2202-0205AK
Gasket & seal kit. Fits N05561. (for model K14.7)
Item No.
Part That Fits:
INCLUDES: All gaskets, seals, o-rings, and gasket sealant.TIP/NOTE: Only fits modification-7 units.
N05561
NP-2202-0206AK
Gasket & seal kit. Fits N05564. (for model K15)
Item No.
Part That Fits:
INCLUDES: All gaskets, seals, o-rings, and gasket sealant.TIP/NOTE: All vintage.
N05564
NP-2202-0394AK
Gasket & seal kit. Fits KIT-0104. (for model CII, IK100)
Item No.
Part That Fits:
INCLUDES: All gaskets, seals, o-rings, and gasket sealant.
KIT-0104
NP-2202-0395AK
Gasket & seal kit. Fits KIT-0108. (for model IK12.14-II)
Item No.
Part That Fits:
INCLUDES: All gaskets, seals, o-rings, and gasket sealant.
KIT-0108
NP-2202-0396AK
Gasket & seal kit. Fits KIT-0102. (for model Ut10, JII & Oceanus)
Item No.
Part That Fits:
INCLUDES: All gaskets, seals, o-rings, and gasket sealant.
KIT-0102
NP-2202-0474AK
Gasket & seal kit. Fits KIT-0106. (for models M-II, M-II.200, M-II.250, IK120)
Item No.
Part That Fits:
INCLUDES: All gaskets, seals, o-rings, gasket sealant and lube.
KIT-0106
NP-2202-0491AK
Gasket & seal kit. Fits N06233. (for models K20, K150, K180)
Item No.
Part That Fits:
INCLUDES: All gaskets, seals, o-rings, gasket sealant and grease.
N06233 013853 N05413
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 93
NP-2202-0716AK
Gasket & seal kit. (for model P)
Item No.
Part That Fits:
FUNCTION/RATING: Fits Purus and Purus-H, 06/80 to 02/86
N06414
Kit - Master
Fits Bauer Compressor®
NP-2250-0439AK
Master overhaul kit. (for model JII)
Item No.
Part That Fits:
INCLUDES: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0440AK
Master overhaul kit. (for model U)
Item No.
Part That Fits:
INCLUDES: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0441AK
Master overhaul kit. (for model C)
Item No.
Part That Fits:
INCLUDES: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0442AK
Master overhaul kit. (for model CII, IK100)
Item No.
Part That Fits:
INCLUDED: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil filter, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0443AK
Master overhaul kit. (for model M)
Item No.
Part That Fits:
INCLUDED: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0444AK
Master overhaul kit. (for models "M-II.200, "M-II.250, and IK120")
Item No.
Part That Fits:
INCLUDED: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil filter, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0445AK
Master overhaul kit. (for model IK12-14-II)
Item No.
Part That Fits:
INCLUDES: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil drive belt, oil filter, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0446AK
Master overhaul kit. (for model K14 Mod 6)
Item No.
Part That Fits:
INCLUDES: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil drive belt, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0447AK
Master overhaul kit. (for model K14.7)
Item No.
Part That Fits:
INCLUDES: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil drive belt, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
COMPRESSOR PARTS
Page 94 - 05/2015 Products That Purify High PSI Air & Gas
NP-2250-0448AK
Complete overhaul kit. (for model K15)
Item No.
Part That Fits:
INCLUDES: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil drive belt, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0449AK
Master overhaul kit. (for model K20, K150, K180)
Item No.
Part That Fits:
INCLUDES: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil drive belt, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0667AK
Master overhaul kit. (for model Ut10)
Item No.
Part That Fits:
INCLUDES: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
NP-2250-0668AK
Master overhaul kit. (for model P)
Item No.
Part That Fits:
INCLUDES: Bearing kit, ring kit, piston/sleeve, valve kit, gaskets & seals, head bolts, cylinder nuts, intake filter, interstage filters, fan drive belt, oil.REQUIRED: Hand tools, valve spanner, manuals.TIP/NOTE: For trained techs only.
N-A
Kit - Misc.
Fits Bauer Compressor®
NP-2207-0434AK
Rebuild kit, oil regulator. Fits 072439
Item No.
Part That Fits:
FUNCTION/RATING: All necessary items to rebuild all styles of hi-psi oil regulators.INCLUDED: Sightglass, cage, ball, seat, and all gaskets/o-rings.RECOMMENDED: One spare kit.TIP/NOTE: Ensure that seat is correctly facing ball.
072439 002622
Kit - Ring
Fits Bauer Compressor®
NP-2211-0410AK
Piston ring kit. (for models P, Ut10)
Item No.
Part That Fits:
INCLUDES: Piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gaps at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
NP-2211-0411AK
Piston ring kit. (for model J-II)
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gap at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
NP-2211-0412AK
Piston ring kit. (for model U) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gap at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
NP-2211-0414AK
Piston ring kit. (for model C) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gap at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
NP-2211-0415AK
Piston ring kit. (for model CII, IK100)
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gap at 90 degrees of one another.
N-A
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 95
NP-2211-0416AK
Piston ring kit. (for model M)
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gaps at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
NP-2211-0417AK
Piston ring kit. (for model MII, IK120)
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gap at 90 degrees of one another.
N-A
NP-2211-0418AK
Piston ring kit. (for model K14)
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gaps at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
NP-2211-0419AK
Piston ring kit. (for model IK12.14II)
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gaps at 90 degrees of one another.
N-A
NP-2211-0420AK
Piston ring kit. (for model K15) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gaps at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
NP-2211-0421AK
Piston ring kit. (for model K20, K150, K180)
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gaps at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
NP-2211-0530AK
Piston ring set. Fits N23810. (12mm, 5 pieces)
Item No.
Part That Fits:
FUNCTION/RATING: 12mm OD plastic, set consists of 5 pieces.TIP/NOTE: Install with gaps at 90 degrees of one another.
N23810
NP-2211-0714AK
Piston ring kit. (for model IK150II)
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gaps at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
NP-2211-0715AK
Piston ring kit. (for model IK180II)
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gaps at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
NP-2211-0795AK
Piston ring kit. (for model OII)
Item No.
Part That Fits:
INCLUDES: All piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gaps at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
COMPRESSOR PARTS
Page 96 - 05/2015 Products That Purify High PSI Air & Gas
NP-2211-0833AK
Piston ring set. Fits N20683. (14mm, 7 pieces)
Item No.
Part That Fits:
FUNCTION/RATING: 14mm, plastic. Set is comprised of 5 pieces.TIP/NOTE: Install with gaps at 90 degrees of one another.
N20683
NP-2211-0971AK
Piston ring kit. (for Model K150)
Item No.
Part That Fits:
INCLUDES: All piston ring sets, o-rings, & piston & sleeve assembly.TIP/NOTE: DO NOT dis-assemble piston/sleeve.ORIGIN: 100% made in USA
N-A
Kit - Valve
Fits Bauer Compressor®
NP-2201-0197AK
Valve overhaul kit. Fits N05333. (for model U) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pieces, gaskets & o-rings, sealant & grease, instructions.REQUIRED: Valve spanner tool to install (NP-2217-0009a).RECOMMENDED: Video instructions.NOTE/TIP: Verify vintage before ordering.
N05333
NP-2201-0198AK
Valve overhaul kit. Fits N05353. (for model C) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pcs, gaskets & o-rings, sealant & grease, instructions.REQUIRED: Valve spanner tool (NP-2217-0009a).RECOMMENDED: Video instructions.NOTE/TIP: Verify vintage before ordering.
N05353
NP-2201-0199AK
Valve overhaul kit. Fits N05319. (for model M) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pcs, gaskets & o-rings, sealant & grease, instructions.REQUIRED: Valve spanner tool (NP-2217-0009a).RECOMMENDED: Video instructions.NOTE/TIP: Verify vintange before ordering.
N05319 KIT-0105
NP-2201-0202AK
Valve overhaul kit. Fits N05341. (for model K14.6) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pieces, gaskets & o-rings, sealant & grease, instructions.REQUIRED: Valve spanner tool (NP-2217-0009a).RECOMMENDED: Video instructions.NOTE/TIP: Verify vintage before ordering.
N05341
NP-2201-0203AK
Valve overhaul kit. Fits N06412. (for model K14.7) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pcs, gaskets & o-rings, sealant & grease, instructions.REQUIRED: Valve spanner tool (NP-2217-0009a).RECOMMENDED: Video instructions.NOTE/TIP: Verify vintage before ordering.
N06412
NP-2201-0397AK
Valve overhaul kit. Fits KIT-0107. (for model IK12.14-II) Made in USA
Item No.
Part That Fits:
INCLUDES: All valve pieces, reed valve assy, gaskets & o-rings, sealant & grease, instructions.REQUIRED: Valve spanner tool (NP-2217-0009a).NOTE/TIP: Verify vintage before ordering.
KIT-0107 VRK-12II
NP-2201-0398AK
Valve overhaul kit. Fits N05457. (for models V - new, UT10, & P ) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pieces, gaskets & o-rings, instructions.REQUIRED: Valve spanner tool (NP-2217-0009a).NOTE/TIP: Verify vintage before ordering.ORIGIN: 100% made in USA.
N05457 KIT-0101
NP-2201-0399AK
Valve overhaul kit. Fits KIT-0101. (JII, Oceanus)
Item No.
Part That Fits:
INCLUDES: All valve pieces, gaskets & o-rings, sealant & grease, instructions.REQUIRED: Valve spanner tool (NP-2219-0007a).NOTE/TIP: Verify vintage before ordering.
KIT-0101
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 97
NP-2201-0400AK
Valve overhaul kit. Fits KIT-0103. (for model CII, IK100) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pieces, gaskets & o-rings, sealant & grease, instructions.REQUIRED: Valve spanner tool (NP-2217-0009a).NOTE/TIP: Verify vintage before ordering.ORIGIN: 100% made in USA.
KIT-0103
NP-2201-0401AK
Valve overhaul kit. (for models M-II, IK120, M.200, M.250) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pcs, reed valve assy, gaskets & o-rings, sealant & grease.REQUIRED: Valve spanner tool (verify correct version).NOTE/TIP: Verify vintage before ordering.ORIGIN: 100% made in USA.
KIT-0105
NP-2201-0402AK
Valve overhaul kit. Fits N05352. (for model K15) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pieces, gaskets & o-rings, sealant & grease, instructions.REQUIRED: Valve spanner tool (NP-2217-0009a).NOTE/TIP: Verify vintage before ordering.ORIGIN: 100% made in USA.
N05352
NP-2201-0432AK
Valve overhaul kit. Fits N05318. (for model P) 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pieces, gaskets & o-rings, sealant & grease, instructions.REQUIRED: Valve spanner tool (order NP-2217-0009a).NOTE/TIP: Verify vintage before ordering.ORIGIN: 100% made in USA.
N05318
NP-2201-0488AK
Valve overhaul kit.. Fits N06523. (for model K20, K150, K180)
Item No.
Part That Fits:
INCLUDES: ALL VALVE PIECES, gaskets & o-rings, sealant & grease.NOTE/TIP: Original Manufacturer's Kit DOES NOT Include Final Valve. Verify vintage before ordering. Final piston/sleeve may need replacing depending on wear because valve seats against the sleeve.
N06523 KIT-K20
NP-2201-1017AK
Valve overhall kit. (for Varius - old)
Item No.
Part That Fits:
INCLUDES: All valve pieces, gaskets, o-rings, and head nuts.RECOMMEND: One spare kit.ORIGIN: Made in USA.
N-A
NP-2201-1042AK
Final stage valve kit. Fits 007790, 014121.
Item No.
Part That Fits:
INCLUDES: All final stage valve pcs, o-rings, tension screw, acorn nut, copper gasket, & grease.REQUIRED: Valve spanner tool (NP-2217-0009A).NOTE/TIP: Verify vintage before ordering, newer suction valve fits number is 081409.
NP-2201-1043AK
Final stage valve kit, Fits 081409, 04121.
Item No.
Part That Fits:
INCLUDES: All final stage valve pcs, o-rings, tension screw, acorn nut, copper gasket, & grease.REQUIRED: Valve spanner tool (NP-2217-0517A).NOTE/TIP: Verify vintage before ordering, older suction valve fits number is 007790.
Lube System (also lubes and greases)
Fits Bauer Compressor®
FO-220030-PP
X-tractor Oil, Fits N25326/Gasket, 36-06-006.
Item No.
Part That Fits:
REQUIRED: Rubber Gasket (order NP-2207-0507A). RECOMMENDED: 1 spare
N25326
NP-2205-0604A
Adjusting screw, oil reg. Fits N02969.
Item No.
Part That Fits:
N02969
COMPRESSOR PARTS
Page 98 - 05/2015 Products That Purify High PSI Air & Gas
NP-2207-0070A
Sightglass, oil return. Fits 056302
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
056302
NP-2207-0149A
Spoolpiece, oil sightglass. Fits 056301
Item No.
Part That Fits:
REQUIRED: Two o-rings (NP-2202-0150A).ORIGIN: 100% made in USA.
056301
NP-2207-0434AK
Rebuild kit, oil regulator. Fits 072439
Item No.
Part That Fits:
FUNCTION/RATING: All necessary items to rebuild all styles of hi-psi oil regulators.INCLUDED: Sightglass, cage, ball, seat, and all gaskets/o-rings.RECOMMENDED: One spare kit.TIP/NOTE: Ensure that seat is correctly facing ball.
072439 002622
NP-2207-0463A
Seat, oil regulator. Fits 058119
Item No.
Part That Fits:
TIP/NOTE: Ensure that seat is correctly facing ball when installing.ORIGIN: 100% made in USA.
058119
NP-2207-0464A
Ball, oil regulator. Fits N02768
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
N02768
NP-2207-0507A
Gasket, oil filter. Fits 077774.
Item No.
Part That Fits:
TIP/NOTE: Inspect this gasket each time oil filter is replaced. Oil filter assembly available (FO-220030-PP).ORIGIN: 100% made in USA.
077774
NP-2207-0885A
Connecting tube, breather. Fits 063536, 069890
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
063536 069890
Piston Rings
Fits Bauer Compressor®
NP-2211-0370A
Piston ring set. Fits N03215, N03856. (70mm)
Item No.
Part That Fits:
FUNCTION/RATING: 70mm OD.TIP/NOTE: Install with ring gaps at 90 degrees of each other.
N03215 N03856
NP-2211-0371A
Piston ring set. Fits N01462. (36mm)
Item No.
Part That Fits:
FUNCTION/RATING: 36mm.TIP/NOTE: Install with gap at 90 degrees of one another. It is suggested to convert to 32mm cylinder version.
N01462
NP-2211-0376A
Piston ring set. Fits N04158. (36mm)
Item No.
Part That Fits:
FUNCTION/RATING: 36mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N04158
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 99
NP-2211-0377A
Piston ring set. Fits N01787 (88mm)
Item No.
Part That Fits:
FUNCTION/RATING: 88mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N01787
NP-2211-0383A
Piston ring set. Fits N01084 (22mm)
Item No.
Part That Fits:
FUNCTION/RATING: 22mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N01084
NP-2211-0384A
Piston ring set. Fits N01082 (45mm)
Item No.
Part That Fits:
FUNCTION/RATING: 45mm.TIP/NOTE: Install with gaps at 90 degrees of one another.
N01082
NP-2211-0385A
Piston ring set. Fits N01080 (88mm)
Item No.
Part That Fits:
FUNCTION/RATING: 88mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N01080
NP-2211-0389A
Piston ring set. Fits N01461, N02257. (60mm)
Item No.
Part That Fits:
FUNCTION/RATING: 60mm.TIP/NOTE: Install with gaps at 90 dgrees of one another.
N01461 N02257
NP-2211-0390A
Piston ring set. Fits N16313, N04375. (32mm)
Item No.
Part That Fits:
FUNCTION/RATING: 32mm OD.
N16313 N04375
NP-2211-0391A
Piston ring set. Fits N02963. (120mm)
Item No.
Part That Fits:
FUNCTION/RATING: 120mm OD.TIP/NOTE: Install with gaps at 90 dgrees of one another.
N02963
NP-2211-0392A
Piston ring set. Fits N15816. (28mm)
Item No.
Part That Fits:
FUNCTION/RATING: 28mm.TIP/NOTE: Install with ring gaps at 90 degrees of one another.
N15816
NP-2211-0393A
Piston ring set. Fits N04206. (60mm)
Item No.
Part That Fits:
FUNCTION/RATING: 60mm OD.TIP/NOTE: Install with gaps at 90 degrees of each other.
N04206
NP-2211-0422A
Piston ring set. Fits N18861. (88mm)
Item No.
Part That Fits:
FUNCTION/RATING: 88mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N18861
COMPRESSOR PARTS
Page 100 - 05/2015 Products That Purify High PSI Air & Gas
NP-2211-0423A
Piston ring set. Fits N02001. (60mm)
Item No.
Part That Fits:
FUNCTION/RATING: 60mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N02001
NP-2211-0424A
Piston ring set . Fits N25396. (88mm)
Item No.
Part That Fits:
FUNCTION/RATING: 88mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N25396
NP-2211-0425A
Piston ring set. Fits N19833. (28mm)
Item No.
Part That Fits:
FUNCTION/RATING: 28mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N19833
NP-2211-0426A
Piston ring set. Fits N04859. (28mm)
Item No.
Part That Fits:
FUNCTION/RATING: 28mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N04859 N04205 N02142
NP-2211-0427A
Piston ring set. Fits N17039. (120mm)
Item No.
Part That Fits:
FUNCTION/RATING: 120mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N17039
NP-2211-0461A
Piston ring set. Fits N04642. (130mm)
Item No.
Part That Fits:
FUNCTION/RATING: 130mm OD.TIP/NOTE: Install with gaps at 90 degrees of one another.
N04642
NP-2211-0599A
Piston ring set. Fits N04386. (130mm)
Item No.
Part That Fits:
FUNCTION/RATING: 130mm OD, set consists of 5 pieces.TIP/NOTE: Install with gaps at 90 degrees of one another.
N04386
NP-2211-0600A
Piston ring set. Fits N18451. (36mm)
Item No.
Part That Fits:
FUNCTION/RATING: 36mm OD, set consists of 5 pieces.TIP/NOTE: Install with gaps at 90 degrees of one another.
N18451
NP-2211-0601A
Piston ring set. Fits N02647. (36mm)
Item No.
Part That Fits:
FUNCTION/RATING: 36mm OD, set consists of 5 pieces.TIP/NOTE: Install with gaps at 90 degrees of one another.
N02647
NP-2211-0854A
Piston ring set, resin. Fits N25842.
Item No.
Part That Fits:
FUNCTION/RATING: First stage ring set.TIP/NOTE: Cylinder interior has special coating - DO NOT HONE! Install with gaps at 90 degrees. For versions with 6 bolt 1st stage and oblong intake filter - also order one guide ring (NP-2211-0879A).
N25842 N17040
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 101
Pistons
Fits Bauer Compressor®
NP-2210-0057A
Piston assembly (36mm) Fits N00794, 072176.
Item No.
Part That Fits:
FUNCTION/RATING: 36mm.INCLUDES: Piston rings.ORIGIN: 100% made in USA.
n00794 072176
NP-2210-0134A
Piston assembly (32mm) Fits: N04378, 070013.
Item No.
Part That Fits:
FUNCTION/RATING: 32mm.INCLUDES: Piston rings.ORIGIN: 100% made in USA.
N04378 070013 004375
NP-2210-0347A
Piston & sleeve assembly. Fits: 012094, 066934
Item No.
Part That Fits:
INCLUDES: O-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part, DO NOT disassemble.ORIGIN: 100% made in USA.
012094 066934
NP-2210-0348A
Piston & sleeve assembly. Fits 014585
Item No.
Part That Fits:
INCLUDES: O-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part, DO NOT disassemble.ORIGIN: 100% made in USA.
014585
NP-2210-0364A
Piston & sleeve assembly. Fits 014742
Item No.
Part That Fits:
INCLUDES: O-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part, DO NOT disassemble.ORIGIN: 100% made in USA.
014742
NP-2210-0378A
Piston, guide. Fits N00858, 072165
Item No.
Part That Fits:
FUNCTION/RATING: Drives floating piston. Material is aluminum.INCLUDES: Wrist pin & clips.ORIGIN: 100% made in USA.
N00858 072165 N01075 012093
NP-2210-0379A
Piston assembly (1st stage) Fits: 011612, 069975.
Item No.
Part That Fits:
INCLUDES: Piston rings, wrist pin, & clips.
011612 069975
NP-2210-0470A
Piston & sleeve assembly. Fits 014609
Item No.
Part That Fits:
INCLUDES: O-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part, DO NOT disassemble.ORIGIN: 100% made in USA.
014609
NP-2210-0471A
Piston assembly, steeple (60 x 36 mm) Fits 072249, 062487.
Item No.
Part That Fits:
INCLUDES: Piston rings, wrist pin, clips.TIP/NOTE: 60mm x 36mm.ORIGIN: 100% made in USA.
072249 062487
NP-2210-0518A
Piston & sleeve assembly. Fits 057154
Item No.
Part That Fits:
INCLUDES: O-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part, DO NOT disassemble.ORIGIN: 100% made in USA.
057154
COMPRESSOR PARTS
Page 102 - 05/2015 Products That Purify High PSI Air & Gas
NP-2210-0528A
Piston & sleeve assembly. Fits 078045
Item No.
Part That Fits:
INCLUDES: O-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part, DO NOT disassemble.ORIGIN: 100% made in USA.
078045
NP-2210-0529A
Piston & sleeve assembly. Fits 078043
Item No.
Part That Fits:
INCLUDES: Piston rings, o-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part, DO NOT disassemble.ORIGIN: 100% made in USA.
078043
NP-2210-0531A
Piston & sleeve assembly. Fits 075310
Item No.
Part That Fits:
INCLUDES: Piston rings, o-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part, DO NOT disassemble.ORIGIN: 100% made in USA.
075310
NP-2210-0562A
Piston assembly. Fits NP-2210-0562A
Item No.
Part That Fits:
INCLUDES: Piston rings, wrist pin, c-clips.ORIGIN: 100% made in USA.
069949 N02634
NP-2210-0567A
Piston & sleeve assembly. Fits 062901
Item No.
Part That Fits:
INCLUDES: O-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part, DO NOT disassemble.ORIGIN: 100% made in USA.
062901
NP-2210-0591A
Piston assembly. Fits 078334
Item No.
Part That Fits:
INCLUDES: Piston rings, wrist pin, c-clips.TIP/NOTE: 60mm x 28mm.ORIGIN: 100% made in USA.
078334
NP-2210-0835A
Piston & sleeve assembly. Fits 061050, 060532
Item No.
Part That Fits:
INCLUDES: Piston pin, cylinder liner, o-rings.TIP/NOTE: The liner acts as seat for the valves. Both may require replacement at the same time.
060532 061050
NP-2210-0836A
Piston assembly, guide. Fits N00824, 069950
Item No.
Part That Fits:
INCLUDES: Piston, wrist pin, c-clips.TIP/NOTE: Piston tends to wear/crack at top after time.ORIGIN: 100% made in USA.
069950 N00824 N00823
Plumbing, Pipe, Hose, Fittings
Fits Bauer Compressor®
NP-2214-0105A
Fitting, compresson nut. Fits N03608, NUT-0013. (12mmLL)
Item No.
Part That Fits:
FUNCTION/RATING:12mm-LL nut for compression fitting.REQUIRED: Matching ferulle.
N03608 NUT-0013
NP-2214-0106A
Fitting, ferulle. FitsN03609, N3609
Item No.
Part That Fits:
FUNCTION/RATING: 12mm-LL compression ferulle.RECOMMENDED: 2 spare.
N03609
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 103
NP-2214-0123A
Fitting, male connector. Fits N07838, N3418, N20341, CON-0266. (12mmLL)
Item No.
Part That Fits:
FUNCTION/RATING: 12mm-LL compression x R1/4-BSP.RECOMMENDED: 1 spare.
N03418 N20341 CON-0266 N20189
NP-2214-0171A
Fitting, male connector (for final discharge) Fits N20209. (8 mm)
Item No.
Part That Fits:
FUNCTION/RATING: Final exit fitting. 8mm-S compression x R1/4-BSP.RECOMMENDED: 1 spare.
N20209 N03811 N04687 N03504
NP-2214-0483A
Fitting, ferulle. Fits N07441.
Item No.
Part That Fits:
FUNCTION/RATING: 12mm-L compression ferulle. Medium pressure.
N07441
NP-2214-0515A
Fitting, adaptor. (3/8 ISO-M x 1/4 NPT-F)
Item No.
Part That Fits:
ADP-0020
NP-2214-0545A
Fitting, male connector. Fits N20059, N15400.
Item No.
Part That Fits:
FUNCTION/RATING: 12mmL x 1/4BSP. Medium pressure.INCLUDES: Copper gasket
N15400 N20059
NP-2214-0546A
Fitting, compression nut. Fits N07433. (12 L)
Item No.
Part That Fits:
N07433
NP-2214-0547A
Fitting, tube reducer. Fits N03629, N20202.
Item No.
Part That Fits:
FUNCTION/RATING: 12mmL X 15mmL compression.
N03629 N20202
NP-2214-0548A
Fitting, tube coupler. (12 mmLL)
Item No.
Part That Fits:
N03464 UNN-0050
NP-2214-0789A
Fitting, ferulle. Fits N03663. (6 mmL)
Item No.
Part That Fits:
N03663
NP-2214-0790A
Fitting, compression nut. Fits N07430. (6 mmL)
Item No.
Part That Fits:
N07430 NUT-0055
COMPRESSOR PARTS
Page 104 - 05/2015 Products That Purify High PSI Air & Gas
NP-2214-0828A
Hex Plug. Fits N03459, PLU-0028. (R1/8)
Item No.
Part That Fits:
REQUIRED: Copper gasket NP-2202-0043A.
N03459 PLU-0028
NP-2214-1020A
Fitting, male elbow. Fits N03458, ELL-0111.
Item No.
Part That Fits:
N03458 ELL-0111 N22719
NP-2214-1054A
Hose assembly, breather tube. Fits N03857, N03737.
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
N03857 N3857 N03737 N3737
Specialty Tools and Tech Supplies
Fits Bauer Compressor®
NP-2213-0039A
Gauge. panel mount (200 psi). Fits GAU-200.
Item No.
Part That Fits:
FUNCTION/RATING: 0-200psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAU-0200 GAG-0006W
NP-2213-0040A
Gauge, panel mount (600 psi). Fits GAU-600.
Item No.
Part That Fits:
FUNCTION/RATING: 0-600psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAU-0600 GAG-0007W
NP-2213-0041A
Gauge, panel mount (1500 psi). Fits GAU-1500, GAG-00008.
Item No.
Part That Fits:
FUNCTION/RATING: 0-1500psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAU-1500 GAG-0008W GAG0008S
NP-2213-0042A
Gauge, panel mount (7500 psi). Fits GAU-7500.
Item No.
Part That Fits:
FUNCTION/RATING: 0-7500psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAU-7500 GAG-0009W
NP-2213-0481A
Gauge, panel (10,000 psi). Fits GAG-10000, GAU-10000.
Item No.
Part That Fits:
FUNCTION/RATING: 0-10,000psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAG-10000 GAU-10000
NP-2213-0722A
Gauge, panel mount. (5000 psi) Fits GAU-5000.
Item No.
Part That Fits:
FUNCTION/RATING: 0-5000psi, liquid filled, panel mount, 1/4npt cbm.INCLUDES: Panel clamp and flange.REQUIRED: Hole size of 2.5".
GAU-5000
NP-2217-0009A
Tool, valve spanner. Fits 004555.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.TIP/NOTE: There are 2 versions of this tool. This tool fits suction valve 007790 (NP-2201-0001A). The other tool (NP-2217-0517A) fits newer suction valve and has the pins further apart.
004555
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 105
NP-2217-0517A
Tool, valve spanner. Fits 082048.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.TIP/NOTE: There are 2 versions of this tool. This tool fits suction valve 081409 (NP-2201-0516A). The other tool (NP-2217-0009A) fits older suction valve and has the pins closer together.
082048
NP-2220-0138A
Switch, air pressure. Fits SWT-0160.
Item No.
Part That Fits:
FUNCTION/RATING: Adjustable range 3650-7500 PSI. Has EMT electrical connection w/ wire leads.TIP/NOTE: SWT-0160-1 (NP-2220-0541A) has Din electrical connection
SWT-0160
NP-2220-0139A
Switch, oil pressure. Fits SWT-0119.
Item No.
Part That Fits:
FUNCTION/RATING: Adjustable range 360-1700psi. Has EMT electical connection w/ leads.
SWT-0119
NP-2220-0382A
Sensor, high temperature. Fits SWT-0015. (N/C)
Item No.
Part That Fits:
FUNCTION/RATING: Pre-wired for normally closed circuit. Has leads and spade coupler & 8-32 stud end. Maximum 12amps.ORIGIN: 100% made in USA.
SWT-0015
NP-2220-0541A
Switch, air pressure (for DIN connector) Fits SWT-0160-1, SWT-257
Item No.
Part That Fits:
FUNCTION/RATING: Adjustable range 3000-7500 psi.INCLUDES: DIN connector.
SWT-0160-1 SWT-257
NP-2220-0542A
Switch, oil pressure (for DIN connector) Fits SWT-0119-1
Item No.
Part That Fits:
FUNCTION/RATING: Adjustable range 22.6-125 psi.INCLUDES: DIN connector.
SWT-0119-1
NP-2220-0622A
Hour meter (90 - 240 volt) Fits HMR-0001, HMR-0021, N16625
Item No.
Part That Fits:
FUNCTION/RATING: Analog hour meter. Operates on a range of ac/dc voltages (90-240, 50/60Hz).REQUIRES: 2" mounting hole.
HMR-0001 N16625 DV/HMR HMR-0021
NP-2220-0659A
Hour meter, LCD (10 - 270 volt) Fits HMR-5, HMR-0020
Item No.
Part That Fits:
FUNCTION/RATING: Indicates run time in hours/minutes. 7mm LCD. 2.8" face. 10-270volt ac/dc.REQUIRED: 2" hole.
HMR-0005 HMR-0020
NP-2220-0797A
Switch, air pressure, Fits N01010, SWT-0055
Item No.
Part That Fits:
FUNCTION/RATING: Air pressure switch. 1000-4500psi adjustable.TIP/NOTE: Box type enclosure.
N01010 SWT-0055
NP-2221-0563A
Intake Filter Housing assembly, Fits 013758.
Item No.
Part That Fits:
INCLUDED: Filter element, clamp, and o-rings.
013758
COMPRESSOR PARTS
Page 106 - 05/2015 Products That Purify High PSI Air & Gas
NP-2222-0565AK
Silencer Assembly Kit, ACD
Item No.
Part That Fits:
INCLUDES: Pressure dampener, silencer, fluid collector, fittings, and connections.ORIGIN: 100% made in USA.
TNK-0068-KIT
Valve Heads
Fits Bauer Compressor®
NP-2216-0026A
Valve head, bare (for final) Fits 014117.
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
014117
NP-2216-0027A
Valve head cover (for final stage) Fits 014118.
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
014118
NP-2216-0064A
Valve head assembly. Fits 014087, NSN-4820-01-475-9313. (4-hole style)
Item No.
Part That Fits:
INCLUDES: Valves & gaskets, head gasket, fittings, & head bolts.REQUIRED: Gasket sealant.ORIGIN: 100% made in USA.
014087
NP-2216-0065A
Valve head assembly (final stage) Fits 014089, NSN-4820-01-475-9328.
Item No.
Part That Fits:
INCLUDES: Valves & gaskets, fittings, allen wrench, & head bolts.ORIGIN: 100% made in USA.
014089
NP-2216-0066A
Valve head, bare. Fits 014123.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.TIP/NOTE: 6 hole bolt pattern.ORIGIN: 100% made in USA.
014123
NP-2216-0067A
Valve head, bare. Fits 014125.
Item No.
Part That Fits:
FUNCTION/RATING: 2nd stage for K15.RECOMMENDED: 1 spare.TIP/NOTE: 4 hole bolt pattern.ORIGIN: 100% made in USA.
014125
NP-2216-0069A
Valve head assembly. Fits 014696.
Item No.
Part That Fits:
INCLUDES: Valve and gaskets, fittings, & head bolts.REQUIRED: Gasket sealant, relief valve.ORIGIN: 100% made in USA.
014696 069955
NP-2216-0071A
Valve head assembly. (final stage) Fits 057057, 073628, 069793, 057058.
Item No.
Part That Fits:
FUCTION/RATING: Aluminum body, 5000psi.INCLUDES: Valve and gaskets, fittings, allen wrench, & head bolts.ORIGIN: 100% made in USA.
057057 073628 069793 057058
NP-2216-0143A
Valve head assembly. Fits 058245.
Item No.
Part That Fits:
INCLUDES: Valve and gaskets, fittings, & head bolts.REQUIRED: Gasket sealant.ORIGIN: 100% made in USA.
058245
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 107
NP-2216-0176A
Valve head assembly. Fits 069954.
Item No.
Part That Fits:
FUNCTION/RATING: 5000psi.INCLUDES: Valve and gaskets, fittings, allen wrench, & head bolts.ORIGIN: 100% made in USA.
069954
NP-2216-0181A
Valve head assembly. Fits 014086, 69791. 100% made in USA
Item No.
Part That Fits:
INCLUDES: Valve and gaskets, fittings, & head bolts.REQUIRES: Gasket sealant, Relief valve.ORIGIN: 100% made in USA.
014086 069791
NP-2216-0182A
Valve head assembly. Fits 068625, 069792, 014085. 100% made in USA
Item No.
Part That Fits:
INCLUDES: Valve and gaskets, fittings, & head bolts.REQUIRES: Gasket sealant.ORIGIN: 100% made in USA.
068625 069792 014085
NP-2216-0375A
Valve head assembly. Fits 069977. (for 1st stage) 100% made in USA
Item No.
Part That Fits:
069977
NP-2216-0618A
Valve head, bare. Fits 014929. (4 bolt) 100% made in USA
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
014929
NP-2216-0619A
Valve head, bare. Fits 411C, 057254. (for military K15, 4 hole) 100% made in USA
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
000411 057254
NP-2216-0855A
Valve head, bare. Fits 061362. 100% made in USA
Item No.
Part That Fits:
FUNCTION/RATING: Final valve head with inter-filter mounting holes.REQUIRED: Head cover, fittings, valves, and head bolts.ORIGIN: 100% made in USA.
061362
NP-2216-0884A
Valve head cover. Fits 059457. (For final) 100% made in USA
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
059457
NP-2216-0892A
Valve head assembly, final. Fits 069931. 100% made in USA
Item No.
Part That Fits:
FUNCTION/RATING: Final valve head assembly with inter-filter mounting holes.INCLUDES: Valve head, head cover, fittings, valves, o-rings/gaskets, allen wrench, and head bolts.ORIGIN: 100% made in USA.
069931
NP-2216-1023A
Valve head assembly. Fits 000411, 057254.
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
000411 057254
COMPRESSOR PARTS
Page 108 - 05/2015 Products That Purify High PSI Air & Gas
Valves
Fits Bauer Compressor®
NP-2201-0001A
Valve assembly, suction (for final). Fits 007790, 056359.
Item No.
Part That Fits:
INCLUDES: Illustrated instructions.REQUIRED: Valve spanner tool (order NP-2217-0009a).RECOMMENDED: 1 spare valve and tool. Installation video.ORIGIN: 100% made in USA.
007790 056359
NP-2201-0002A
Valve assembly, discharge (for final). Fits 014121.
Item No.
Part That Fits:
INCLUDES: O-ring and instructions.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
014121
NP-2201-0004A
Valve insert, discharge. Fits 012835.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
012835
NP-2201-0005A
Valve insert, suction. Fits 012836.
Item No.
Part That Fits:
REQUIRED: Spanner tool to remove/install.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
012836
NP-2201-0006A
Valve insert, discharge. Fits 012840.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
012840
NP-2201-0007A
Valve insert, suction. Fits 012841.
Item No.
Part That Fits:
REQUIRED: Spanner tool to remove/install.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
012841
NP-2201-0025A
Valve plate, (for 1st Stage). Fits 009884.
Item No.
Part That Fits:
FUNCTION/RATING: 1st stage.TIP/NOTE: Manufactured of high performance spring steel w/protective coating.ORIGIN: 100% made in USA.
009884
NP-2201-0028A
Valve cover, discharge. Fits 014124.
Item No.
Part That Fits:
REQUIRED: O-ring (NP-2202-0103A).RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
014124
NP-2201-0030A
Valve assembly, discharge. Fits 014582.
Item No.
Part That Fits:
INCLUDED: Valve insert, disc, spring, o-ring, gaskets, cover, tension screw, and nut.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
014582
NP-2201-0031A
Valve assembly, discharge. Fits 014583.
Item No.
Part That Fits:
INCLUDES: Valve insert, disc, spring, o-ring, gaskets, cover, tension screw, and nut.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
014583
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 109
NP-2201-0032A
Valve assembly, suction. Fits 056406, N15275, N03581, N02975.
Item No.
Part That Fits:
FUNCTION/RATING: 1st stage.INCLUDED: Gaskets, 2 pcs. (NP-2202-0021A).RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
056406 N15275 N03581 N02975
NP-2201-0033A
Valve assembly, discharge. Fits 056407, N02515, N04149 , N15272.
Item No.
Part That Fits:
FUNCTION/RATING: 1st stage.INCLUDED: Gaskets, 2 pcs (NP-2202-0021A).RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
056407 N02515 N04149 N15272
NP-2201-0034A
Valve assembly, discharge. Fits 058135.
Item No.
Part That Fits:
INCLUDED: O-ring (NP-2202-0083A).RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
058135
NP-2201-0035A
Valve assembly, suction. Fits 058136.
Item No.
Part That Fits:
INCLUDED: O-ring (NP-2202-0083A).RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
058136
NP-2201-0036A
Valve insert, discharge. Fits 013823, 012343.
Item No.
Part That Fits:
INCLUDES: Cage, disc, spring, and gaskets.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
013823
NP-2201-0061A
Valve insert, suction. Fits 013822.
Item No.
Part That Fits:
INCLUDES: Cage, disc, spring, and gaskets.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
013822
NP-2201-0068A
Washer, valve spring. Fits 014332.
Item No.
Part That Fits:
FUNCTION/RATING: Keeps tension on valve cover.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
014332
NP-2201-0118A
Valve assembly, reed. Fits N04670.
Item No.
Part That Fits:
REQUIRED: Head gaskets (according to specific model).RECOMMENDED: 1 spare.TIP/NOTE: 4 mounting holes.ORIGIN: 100% made in USA.
N04670
NP-2201-0130A
Valve insert, discharge. Fits 058232.
Item No.
Part That Fits:
INCLUDES: Valve insert, disc, spring, o-ring, gaskets, cover, tension screw, and nut.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
058232
NP-2201-0132A
Valve assembly, discharge. Fits 058855.
Item No.
Part That Fits:
INCLUDES: Valve insert, disc, spring, o-ring, gaskets, cover, tension screw, and nut.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
058855
COMPRESSOR PARTS
Page 110 - 05/2015 Products That Purify High PSI Air & Gas
NP-2201-0485A
Valve assembly, reed. Fits N04860.
Item No.
Part That Fits:
REQUIRED: Head gasket & o-rings.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
N04860
NP-2201-0516A
Valve assembly, suction. Fits 081409.
Item No.
Part That Fits:
REQUIRED: Valve spanner tool (order NP-2217-0517A).RECOMMENDED: 1 spare valve & tool.ORIGIN: 100% made in USA.
081409
NP-2201-0834A
Valve hood. Fits 056183.
Item No.
Part That Fits:
FUNCTION/RATING: Retains interstage valves.REQUIRED: O-ring (NP-2202-0456A).ORIGIN: 100% made in USA.
056183
NP-2201-0883A
Valve assembly, suction. Fits 009313.
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
009313
NP-2201-0889A
Valve assembly, suction. Fits N04067.
Item No.
Part That Fits:
REQUIRED: Gasket NP-2202-0497A.TIP/NOTE: Ensure valve is installed with the topside facing up. Severe damage can result if installed incorrectly.ORIGIN: 100% made in USA.
N04067
NP-2201-0890A
Valve assembly, discharge. Fits N04068.
Item No.
Part That Fits:
REQUIRED: Gasket NP-2202-0497A.TIP/NOTE: Ensure valve is installed with the topside facing up. Severe damage can result if installed incorrectly.ORIGIN: 100% made in USA.
N04068
NP-2201-0891A
Plug, final head. (for UT-10) Fits 59449.
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
059449
NP-2201-0901A
Valve plate, suction. Fits 011665.
Item No.
Part That Fits:
011665
NP-2201-0930A
Valve assembly, discharge. Fits N15274.
Item No.
Part That Fits:
N15274
NP-2201-0931A
Valve assembly, suction. Fits N15273,
Item No.
Part That Fits:
N15273
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 111
NP-2201-1000A
Valve assembly, discharge. Fits 014122.
Item No.
Part That Fits:
INCLUDES: Illustrated instructions, o-ring.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
014122
NP-2201-1003A
Valve assembly, suction. Fits 056358.
Item No.
Part That Fits:
056358
NP-2205-0102A
Screw, valve tension (for intermediate) Fits N03520
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
N03520
NP-2205-0107A
Acorn nut. Fits N03623
Item No.
Part That Fits:
RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
N03623
NP-2205-0108A
Screw, valve tension (for final) Fits 071065, N03624
Item No.
Part That Fits:
N03624 071065
NP-2205-0177A
Screw, valve tension. Fits 071064.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
071064 N03520
NP-2205-0178A
Screw, valve tension. Fits 071065.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.
071065 N03624
Auto Condensate Drain
Fits Ingersoll Rand®
NP-5022-0798A
Piston, ACD. Fits 3W54047
Item No.
Part That Fits:
3W95921 3W84893 3W54047 3W54048
NP-5022-0871A
Diaphram, ACD. Fits 3W54045
Item No.
Part That Fits:
FUNCTION/RATING: Internal auto drain diaphram.RECOMMEND: 1 spare.
3W54045
COMPRESSOR PARTS
Page 112 - 05/2015 Products That Purify High PSI Air & Gas
Gaskets, Seals, O-rings
Fits Ingersoll Rand®
NP-5002-0594A
Seal, oil. Fits W99622T7.
Item No.
Part That Fits:
W99622T7 37007663
NP-5002-0623A
Gasket, cylinder head (for 15T4) Fits W21482, 30294193
Item No.
Part That Fits:
FUNCTION/RATING: Upper to lower cylinder gasket.ORIGIN: Made in USA.
W21482 30294193
NP-5002-0624A
Gasket, end cover Fits R8168, 304392
Item No.
Part That Fits:
FUNCTION/RATING: Front end cover.ORIGIN: Made in USA.
R8168 30439285
NP-5002-0625A
Gasket, end cover (for 15T4) Fits W21480, 30294961
Item No.
Part That Fits:
FUNCTION/RATING: Back end cover (shaft side).ORIGIN: Made in USA.
W21480 3029461
NP-5002-0626A
Gasket, cylinder base, Fits W75511, 37006814
Item No.
Part That Fits:
FUNCTION/RATING: Cylinder flange to base gasket, 1st/2nd stage cylinder.TIP/NOTE: 4.5" diameter.ORIGIN: Made in USA.
W75511 37006814
NP-5002-0627A
Gasket, cylinder base (for 15T4) Fits W21481, 30294508
Item No.
Part That Fits:
FUNCTION/RATING: Cylinder base gasket for ALL cylinders.ORIGIN: Made in USA
W21481 30294508
NP-5002-0628A
Gasket, guide cylinder, Fits W21483, 30294235
Item No.
Part That Fits:
W21483 30294235
NP-5002-0629A
Gasket, 2nd cooler, Fits W75499, 37006798
Item No.
Part That Fits:
W75499 37006798
NP-5002-0630A
Gasket, 2nd stage (for 15T4) Fits W75496, 31517931
Item No.
Part That Fits:
FUNCTION/RATING: For airhead of 2nd stage.ORIGIN: Made in USA
W75496 31517931 2-0630
NP-5002-0631A
Gasket, 1st cooler. (for 15T4) Fits W21659, 30294821.
Item No.
Part That Fits:
W21659 30294821
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 113
NP-5002-0632A
O-Ring, 2nd cooler (for 15T4) Fits 95097556
Item No.
Part That Fits:
95097556
NP-5002-0633A
O-Ring, 1st cooler (for 15T4) Fits 95018560
Item No.
Part That Fits:
95018560 20A11BM222
NP-5002-0634A
Gasket, copper. Fits X1026T55, 95674842.
Item No.
Part That Fits:
X1026T55 95674842
NP-5002-0635A
O-ring, valve. Fits 37790177, 95018438.
Item No.
Part That Fits:
37790177 95018438
NP-5002-0636A
O-ring, valve. Fits 95018420.
Item No.
Part That Fits:
95018420
NP-5002-0637A
Gasket, cylinder head. Fits X1105T19, 30425599
Item No.
Part That Fits:
X1105T19 30425599
NP-5002-0638A
Back-up ring, valve. Fits W99814T25, MS28782-25, 37124740.
Item No.
Part That Fits:
W99814T25 MS28782-25 37124740
NP-5002-0639A
O-ring, valve. Fits 19A11C14, 95286456, X1524T009H.
Item No.
Part That Fits:
19A11C14 95286456 X1524T009H
NP-5002-0640A
O-ring, ACD Piston. Fits 95028486, 95022182.
Item No.
Part That Fits:
95028486 95022182
NP-5002-0641A
Gasket, copper. Fits X1026T54, 95674784, 32019721, 78A11C2X0100X0122.
Item No.
Part That Fits:
X1026T54 95674784 32019721
COMPRESSOR PARTS
Page 114 - 05/2015 Products That Purify High PSI Air & Gas
NP-5002-0642A
O-ring. Fits 95018149.
Item No.
Part That Fits:
95018149 20A11CM212
NP-5002-0644A
O-ring, ACD. Fits 20A11CM006, 95210225.
Item No.
Part That Fits:
95210225 20A11CM006
NP-5002-0645A
O-ring, ACD. Fits 20A11CM008.
Item No.
Part That Fits:
20A11CM008
NP-5002-0718A
O-ring. Fits 95026183.
Item No.
Part That Fits:
95026183 20A11EM031
Kit - Gasket
Fits Ingersoll Rand®
NP-5002-0595AK
Gasket kit. Fits W90620, 37007408. (for 15T4)
Item No.
Part That Fits:
REQUIRED: Oil seal (NP-5002-0594A).
W90620 37007408
NP-5002-0615A
Gasket kit, fits W90619, 37007390 (for 10T2)
Item No.
Part That Fits:
REQUIRES: Oil seal.
W90619 37007390
Piston Rings
Fits Ingersoll Rand®
NP-5011-0666A
Piston ring. Fits 32278558.
Item No.
Part That Fits:
W84807 32278558
Running Gear, Crankshafts, Con-Rods
Fits Ingersoll Rand®
NP-5004-0593A
Crankshaft with bearings (for 15T4). Fits W75291T80
Item No.
Part That Fits:
INCLUDES: Shaft and bearings.REQUIRES: Bushing-Crankpin (R47248) and connecting rods.
30211601 W75291T80
NP-5004-0596A
Bushing, crankpin (for 15T4). Fits R47248, 37002383.
Item No.
Part That Fits:
R47248 37002383
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 115
NP-5004-0597A
Connecting rod, HP. Fits R22593.
Item No.
Part That Fits:
REQUIRES: 1 piece
R22593 32003642
NP-5004-0598A
Connecting rod, LP (for 15T4) Fits R22594.
Item No.
Part That Fits:
REQUIRES: 2 pieces.
R22594 32003659
NP-5004-0610A
Crankshaft with Bearings (for 10T2) Fits W75281T70, 30211619.
Item No.
Part That Fits:
REQUIRES: Bushing-Crankpin # R47245
W75291T70 30211619
NP-5004-0611A
Bushing, Crankpin (for 10T2) Fits R47245, 37002342
Item No.
Part That Fits:
R47245 37002342
NP-5004-0612A
Connecting Rod, HP (for 10T2) Fits R37138, 30217319
Item No.
Part That Fits:
REQUIRES: 1 piece
R37138 30217319
NP-5004-0613A
Connecting Rod, LP (for 10T2) Fits R37136, 30217202
Item No.
Part That Fits:
REQUIRES: 2 pieces
30217202 R37136
Filter - Intake (also elements)
Fits North American Compressor®
AA-166510-PP
X-tractor Intake, Fits Y39283
Item No.
Part That Fits:
250-AB
Cooling System, Heat Exchangers, Fans
Fits Poseidon®
NP-3006-1019A
Intercooler (for UNI, 2nd stage) Fits W5-9400
Item No.
Part That Fits:
W5-9400
Fasteners
Fits Poseidon®
NP-3005-1013AK
Washer, 6mm flat. Fits 010-02. (6 Pack)
Item No.
Part That Fits:
010 02
COMPRESSOR PARTS
Page 116 - 05/2015 Products That Purify High PSI Air & Gas
NP-3005-1015AK
Nut, 6mm lock. Fits 020-87. (6 Pack)
Item No.
Part That Fits:
020 87
Gaskets, Seals, O-rings
Fits Poseidon®
NP-3002-0847A
O-ring. Fits 020-639.
Item No.
Part That Fits:
FUNCTION/RATING: O-ring for 1st stage cylinder base.
020-639
NP-3002-0848A
O-ring. Fits 070-063.
Item No.
Part That Fits:
FUNCTION/RATING: O-ring for 2nd stage cylinder base.
070-063
NP-3002-0849A
O-ring. Fits 020-0640.
Item No.
Part That Fits:
FUNCTION/RATING: O-ring for 3rd stage cylinder base.
020-640
NP-3002-1002A
O-ring. Fits 040 869.
Item No.
Part That Fits:
040 869
NP-3002-1009A
Gasket, cylinder head (1st stage) Fits W5-8144
Item No.
Part That Fits:
W5-8144
NP-3002-1012A
O-ring. Fits 040-868.
Item No.
Part That Fits:
040 868
NP-3002-1014A
O-ring, final valve. Fits 020-789.
Item No.
Part That Fits:
FUNCTION: O-ring to fit final discharge valve.RECOMMEND: 1 spare.
020-789
Kit - Ring
Fits Poseidon®
NP-3011-0830AK
Ring kit. (for P135.4)
Item No.
Part That Fits:
INCLUDES: Piston rings, piston / sleeve, gasketsRECOMMEND: 1 spare kit.ORIGIN: made in USA.
N-A
NP-3011-0880AK
Ring kit. (for model P250)
Item No.
Part That Fits:
INCLUDES: Piston rings, piston/sleeve, gaskets, o-rings.TIP/NOTE: Install rings with gaps at 90 degrees of one another. DO NOT dis-assemble piston/sleeve.
N-A
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 117
Kit - Valve
Fits Poseidon®
NP-3001-0730AK
Valve kit. (for P200) 100% made in USA
Item No.
Part That Fits:
FUNCTION/RATING: Kit for models P200 & P201.INCLUDES: All valves and gaskets.REQUIRED: Valve spanner tool.
050-319
NP-3001-1016AK
Valve kit. (UNI). 100% made in USA
Item No.
Part That Fits:
INCLUDES: All valve pieces, gaskets, o-rings, and head nuts.RECOMMEND: 1 spare kit..ORIGIN: Made in USA
N-A
Piston Rings
Fits Poseidon®
NP-3011-0724A
Piston ring set. Fits 020-5396.
Item No.
Part That Fits:
TIP/NOTE: Install with ring gaps 90 degrees apart.
020-5396
NP-3011-0725A
Piston ring set. Fits 010-7040.
Item No.
Part That Fits:
TIP/NOTE: Install with rings gaps 90 degrees apart.
010-7040
NP-3011-0727A
Piston ring set. Fits 020-5842.
Item No.
Part That Fits:
TIP/NOTE: Install with ring gaps 90 degrees apart.
020-5842
NP-3011-0728A
Piston ring set. Fits 010-787.
Item No.
Part That Fits:
TIP/NOTE: Install with ring gaps 90 degrees apart.
010-787
NP-3011-0729A
Piston ring set. Fits 040-158
Item No.
Part That Fits:
TIP/NOTE: Install with gaps 90 degrees apart.
040-158
NP-3011-0831A
Piston ring set. Fits 030-856.
Item No.
Part That Fits:
INCLUDES: One each, compression, oil, scraper ring.TIP/NOTE: Install with ring gaps 90 degrees apart.
030-856
NP-3011-0832A
Piston ring set (2nd stage) Fits 020-647
Item No.
Part That Fits:
FUNCTION/RATING: 2nd stage for model P135.INCLUDES: 1 compression ring, 3 tapered ring.TIP/NOTE: Install with ring gaps at 90 degrees to each other.
020-647
COMPRESSOR PARTS
Page 118 - 05/2015 Products That Purify High PSI Air & Gas
Pistons
Fits Poseidon®
NP-3010-0723A
Piston & sleeve. Fits W7-8045
Item No.
Part That Fits:
FUNCTION/RATING: Cylinder sleeve with floating piston and rings.INCLUDES: O-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part. DO NOT dis-assemble.
W7-8045
NP-3010-0731A
Piston & sleeve. Fits W6-2901
Item No.
Part That Fits:
FUNCTION/RATING: Cylinder sleeve with floating piston and rings.INCLUDES: O-rings.RECOMMENDED: 1 spare.TIP/NOTE: Precision part, DO NOT dis-assemble.
W6-2901 W5-5466
Valves
Fits Poseidon®
NP-3001-0796A
Valve assembly, suction. Fits W7-790.
Item No.
Part That Fits:
FUNCTION/RATING: Suction valve for final stage.REQUIRED: Valve spanner tool to remove/install.RECOMENDED: 1 spare.ORIGIN: 100% made in USA.
W7-790 W5-6359
NP-3001-0840A
Valve assembly, discharge. Fits W1-4121.
Item No.
Part That Fits:
FUNCTION/RATING: Discharge valve for final stage.INCLUDES: O-ring.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
W1-4121
NP-3001-0999A
Valve assembly, discharge. Fits W1-4122.
Item No.
Part That Fits:
INCLUDES: Illustrated instructions, o-ring.RECOMMENDED: 1 spare.ORIGIN: 100% made in USA.
W1-4122
NP-3001-1004A
Valve assembly, suction. Fits W5-6358.
Item No.
Part That Fits:
W5-6358
NP-3001-1010A
Valve assembly, reed. Fits 040-860.
Item No.
Part That Fits:
REQUIRED: Gasket (NP-3002-1009A).ORIGIN: Made in USA.
040 860
Bearings
Fits Reavell® / Mako® / Compair®
NP-6603-0916A
Bearing, oil end. Fits 98076/1018.
Item No.
Part That Fits:
FUNCTION/RATING: Main bearing, non-drive end, roller type.REQUIRED: 1 piece.ORIGIN: Asia or Europe.
98076/1018 001RR98076/1018
NP-6603-0932A
Bearing, main. Fits 98076/1019 (drive end).
Item No.
Part That Fits:
98076/1019 001RR98076/1019
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 119
NP-6603-0941A
Bearing Assembly, lower rod end. Fits 98076/1021, 98076/1063. (Includes inner ring)
Item No.
Part That Fits:
INCLUDES: Needle bearing, outer ring, and inner ring (fits 98076/1063).TIP/NOTE: This is a COMPLETE assembly. No need to purchase inner ring separately.ORIGIN: Asia or Europe.
98076/1021 001RR98076/1021 98076/1063
NP-6603-0942A
Bearing, upper rod end. Fits 96072/0029.
Item No.
Part That Fits:
96072/0029 001RR96072/0029
NP-6603-0949A
Bearing, drive end. Fits 98076/1026.
Item No.
Part That Fits:
FUNCTION/RATING: Main shaft ball bearing.REQUIRED: 1 piece.ORIGIN: Asia or Europe.
98076/1026 001RR98076/1026
NP-6603-0956A
Bearing, rod end. (small end 1st stage) Fits 98076/1022.
Item No.
Part That Fits:
REQUIRED: 1 piece per connecting rod.ORIGIN: Asia or Europe.
98076/1022 011RR98076/1022
NP-6603-0957A
Bearing, rod end. (small end 2nd stage) Fits 98076/1023.
Item No.
Part That Fits:
FUNCTION/RATING: Bearing for connecting rod, piston end.REQUIRED: 1 piece per connecting rod.ORIGIN: Asia or Europe.
98076/1023 001RR98076/1023
NP-6603-1068A
Bearing, main. Fits 98076/1044, 001RR98076.
Item No.
Part That Fits:
001RR98076/1044 98076/1044
NP-6603-1097A
Bearing, ball, fits 96004/0013
Item No.
Part That Fits:
96004/0013
NP-6603-1099A
Bearing, upper con-rod. Fits 96072/0046.
Item No.
Part That Fits:
Control Valves
Fits Reavell® / Mako® / Compair®
NP-6615-1024A
Relief valve, Fits 98650/1220 & 1171 (8 bar / 115 psi)
Item No.
Part That Fits:
INCLUDES: Usit ring.ORIGIN: 100% made in USA.
50/1220 98650/11638.3 98650/1163 98650/1
NP-6615-1044A
Relief valve, Fits 98650/1192 (103 bar / 1500 psi)
Item No.
Part That Fits:
INCLUDES: Usit ring.ORIGIN: 100% made in USA.
98650/1192 98650/116497
COMPRESSOR PARTS
Page 120 - 05/2015 Products That Purify High PSI Air & Gas
NP-6615-1081A
Relief valve, Fits 98650/1330, 98650/1221 (300 psi / 21 bar)
Item No.
Part That Fits:
98650/1330 98650/1221
Cooling System, Heat Exchangers, Fans
Fits Reavell® / Mako® / Compair®
NP-6606-0705A
Fan, assembly, 12 blade (black). Fits 98084/1002.
Item No.
Part That Fits:
INCLUDES: 12 fan blades, hub, screws.TIP/NOTE: Blade is red in color.
NP-6606-0706A
Fan assembly, 12 blade (black). Fits 98084/1004.
Item No.
Part That Fits:
INCLUDES: 12 blades, hub, screws.TIP/NOTE: Blade is black in color.
98084/1004 001RR98084/1004
NP-6606-0707A
Fan, assembly,10 blade (black). Fits 98084/1103.
Item No.
Part That Fits:
INCLUDES: All blades and hub.TIP/NOTE: Color of blade is black.
98084/1003 001RR98084/1003
NP-6606-0708A
Fan, assembly, 10 blade (black). Fits 98084/1001.
Item No.
Part That Fits:
INCLUDES: Hub, 10 blades, and screws.TIP/NOTE: Blade is black in color.
98084/1001 01RR9804/1001
Electrical Components
Fits Reavell® / Mako® / Compair®
NP-6620-0851A
Switch, Air Pressure, Fits 003M96201, M96201
Item No.
Part That Fits:
FUNCTION/RATING: Adjustable range 1450-4400 psi. Proof pressure 7000psi. Has spade type connections, 5amp 125/250volt. 1/4npt-male.
M96201 003M96201
Fasteners
Fits Reavell® / Mako® / Compair®
NP-6605-0913AK
Bolt, hex head. Fits 95000/0254. (4 Pack)
Item No.
Part That Fits:
FUNCTION/RATING: Retains oil pump or oil sump cover.REQUIRED: 3 pieces.
95000/0254 001RR95000/0254
NP-6605-0914AK
Washer, flat. Fits 95148/0014. (6 Pack)
Item No.
Part That Fits:
FUNCTION/RATING: 8mm I.D. steel.
95148/0014 001RR95148/0014
NP-6605-0920A
Bolt, allen cap. (for valve head). Fits G10.
Item No.
Part That Fits:
FUNCTION/RATING: Holds final valve assembly.REQUIRED: 2 pieces per assembly.
C201654-G10 G10
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 121
NP-6605-0943A
C-clip. Fits 95650/0014.
Item No.
Part That Fits:
FUNCTION/RATING: Retaining clip for wrist pin.REQUIRED: 2 pieces per piston.
95650/0014 001RR95650/0014
NP-6605-0948AK
Nut, hex. 8mm. Fits 95111/0005. (6 pack)
Item No.
Part That Fits:
TIP/NOTE: Package of 6 pieces.
95111/0005 001RR95111/0005
NP-6605-0968A
Bolt, allen cap (for valve head) Fits C201653-F10
Item No.
Part That Fits:
FUNCTION/RATING: Fits intermediate valve head.REQUIRED: 2 pieces per valve head.
C201653-F10 98650/1883-F10 F10
NP-6605-1048AK
Bolt, allen cap, (6 pack). fits 5406,7,8 & 9. Fits 001RR95000/0256, 95000/0256.
Item No.
Part That Fits:
95000/0256
NP-6605-1062AK
Bolt, allen cap., 4th stage head, fits 5406/07, (6 pack). Fits 98086/1016.
Item No.
Part That Fits:
98086/1016
NP-6605-1064AK
Bolt, allen cap, 3rd stage head, fits5406/07, (6 pack). Fits 95000/0262.
Item No.
Part That Fits:
95000/0262
NP-6605-1067A
Bolt, allen cap, for 5406/07 oil cam cover. Fits 95000/0255.
Item No.
Part That Fits:
95000/0255
NP-6605-1067AK
Bolt, allen cap (for oil cam cover Fits 5406,07) Fits 95000/0255 (4 pack)
Item No.
Part That Fits:
95000/0255
NP-6605-1079A
Lock nut, 6mm, vlave cover for 5406/07. Fits 95111/0004.
Item No.
Part That Fits:
95111/0004
NP-6605-1079AK
Lock nut, 6mm, 4 pk. Fits 9511/0004.
Item No.
Part That Fits:
95111/0004
COMPRESSOR PARTS
Page 122 - 05/2015 Products That Purify High PSI Air & Gas
NP-6605-1106A
Washer, split lock 8mm. Fits 95179/0006.
Item No.
Part That Fits:
95179/0006
NP-6605-1108A
Plug, 3rd stg, BSPP Hex-Head, Fits PS1814/4.
Item No.
Part That Fits:
NP-6605-1109A
Plug (1/8 3rd stage, BSPP Hex-Head) Fits PS1814/2
Item No.
Part That Fits:
NP-6605-1119A
Circlip for Mako Piston
Item No.
Part That Fits:
Filter - Intake (also elements)
Fits Reavell® / Mako® / Compair®
AA-656503-PP
X-tractor Intake, Fits 98262-1037
Item No.
Part That Fits:
Function: Air Intake Filter. Recommended: 1 spare.
98262/1037 000N70
NP-6621-0769A
Intake filter housing assembly. Fits 98262/1036.
Item No.
Part That Fits:
INCLUDES: Housing w/cover, internal & external o-rings, filter element, retension spring, and clamp.ORIGIN: Europe.
98262/1036 00313758 13758
NP-6621-0909A
Filter element, air intake. Fits N70.
Item No.
Part That Fits:
REQUIRED: 1 piece.ORIGIN: Asia.
N70 007N70
Gaskets, Seals, O-rings
Fits Reavell® / Mako® / Compair®
NP-6602-0734A
O-ring. Fits 95602/0050, 98504/1106.
Item No.
Part That Fits:
95602/0050 98504/1106
NP-6602-0735A
O-ring. Fits 95602/0054.
Item No.
Part That Fits:
95602/0054 001RR95602/0054
NP-6602-0741A
O-ring. Fits 95602/0016.
Item No.
Part That Fits:
95602/0016 001RR95602/0016
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 123
NP-6602-0742A
O-ring,. Fits 95602/0017.
Item No.
Part That Fits:
95602/0017
NP-6602-0743A
O-ring. Fits 95602/0018.
Item No.
Part That Fits:
FUNCTION/RATING: Seals lube cavity on cylinder liner.ORIGIN: Asia.
95602/0018
NP-6602-0746A
O-ring (2nd stage valve cover) Fits 95602-0022.
Item No.
Part That Fits:
95602/0022
NP-6602-0751A
O-ring. Fits 98504/1106, 95602/0040.
Item No.
Part That Fits:
REQUIRED: 1 piece.ORIGIN: Asia
95602/0040 98504/1106
NP-6602-0752A
O-ring (for 5406/7) Fits 95602/0041
Item No.
Part That Fits:
95602/0041
NP-6602-0754A
O-ring, intake adapter. Fits 95602/0045.
Item No.
Part That Fits:
FUNCTION/RATING: Seals intake pipe to housing.REQUIRED: 1 piece.ORIGIN: Asia.
95602/0045
NP-6602-0755A
O-ring. Fits 95602/0051
Item No.
Part That Fits:
95602/0051
NP-6602-0756A
O-ring (1st stage valve cove for 5406) Fits 95602/0052.
Item No.
Part That Fits:
95602/0052
NP-6602-0758A
O-ring, breather cover. Fits 95602/0058.
Item No.
Part That Fits:
REQUIRED: 1 piece.ORIGIN: Asia.
95602/0058
NP-6602-0759A
V-seal. Fits 95602/0059.
Item No.
Part That Fits:
95602/0059
COMPRESSOR PARTS
Page 124 - 05/2015 Products That Purify High PSI Air & Gas
NP-6602-0761A
O-ring. Fits 95602/0061.
Item No.
Part That Fits:
95602/0061
NP-6602-0767A
O-ring. Fits 98504/1030.
Item No.
Part That Fits:
98504/1030
NP-6602-0768A
Gasket, cylinder base (1 stage) Fits 98502/1013
Item No.
Part That Fits:
FUNCTION/RATING: Seals cylinder base to case.REQUIRED: 1pc.ORIGIN: 100% made in USA.
98502/1013
NP-6602-0905A
Gasket, valve head (1 stage) Fits 98650/1021
Item No.
Part That Fits:
98650/1021 001RR98502/1021
NP-6602-0906A
Gasket, cylinder base (2nd stage) Fits 98502/1014
Item No.
Part That Fits:
98502/1014 001RR98502/1014
NP-6602-0907A
Gasket, cylinder base (final stage) Fits 98502/1015
Item No.
Part That Fits:
REQUIRED: 1pc.TIP/NOTE: Apply thin film of silicone gasket sealant when installing.ORIGIN: 100% made in USA.
98502/1015 001RR98502/1015
NP-6602-0908A
O-ring. Fits 98504/1029.
Item No.
Part That Fits:
FUNCTION/RATING: For seal at cylinder base.REQUIRED: 1pc.ORIGIN: Asia.
98504/1029
NP-6602-0910A
Gasket. Fits 98504/1051, PS1322/2.
Item No.
Part That Fits:
04/1051 001RR98504/1051 PS1322/2 00354R
NP-6602-0911A
USIT, ring. Fits PS1322/1
Item No.
Part That Fits:
PS1322/1 001PS1322/1
NP-6602-0912A
Gasket, fiber. Fits 95640/0007
Item No.
Part That Fits:
FUNCTION/RATING: For oil drain plug.REQUIRED: 1 piece.ORIGIN: 100% made in USA.
95640/0007 001RR95640/0007
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 125
NP-6602-0915A
Gasket, oil pump. Fits 98502/1017
Item No.
Part That Fits:
FUNCTION/RATING: Gasket for oil sump cover.REQUIRED: 1 piece.ORIGIN: 100% made in USA.
98502/1017 001RR98502/1017
NP-6602-0917A
Gasket, end cover. Fits 98502/1016
Item No.
Part That Fits:
FUNCTION/RATING: Gasket for oil sump cover, non-drive end.REQUIRED: 1 piece.ORIGIN: 100% made in USA.
98502/1016 001RR98502/1016
NP-6602-0918A
Gasket, copper. Fits 95640/0009
Item No.
Part That Fits:
FUNCTION/RATING: Gasket to seal breather unit.REQUIRED: 1 piece.ORIGIN: 100% made in USA.
95640/0009 001RR95640/0009
NP-6602-0933A
Seal, shaft. Fits 95605/0057.
Item No.
Part That Fits:
FUNCTION/RATING: Main crank shaft oil seal, drive side.REQUIRED: 1 piece.ORIGIN: Asia.
001RR95605/0057 95605/0057 PS1322/2
NP-6602-0934A
O-ring. Fits 95602/0098.
Item No.
Part That Fits:
FUNCTION/RATING: Seal for case back cover.REQUIRED: 1 piece.ORIGIN: Asia.
95602/0098 001RR95602/0098
NP-6602-0960A
O-ring. Fits 98504/1028.
Item No.
Part That Fits:
98504/1028
NP-6602-0961A
Gasket (1st stage cover) Fits 98502/1022
Item No.
Part That Fits:
98502/1022 001RR98502/1022
NP-6602-1047A
Gasket, sight glass (for 5406-9) Fits95640/0014, 001RR95640.
Item No.
Part That Fits:
95640/0014
NP-6602-1049A
Gasket, screw seal. Fits 001RLT6495/56, LT6495/56.
Item No.
Part That Fits:
LT6495/56
NP-6602-1053A
Oil seal, double lip (for 5406/7) Fits 98505/1009.
Item No.
Part That Fits:
001RR98505/1009 98505/1009
COMPRESSOR PARTS
Page 126 - 05/2015 Products That Purify High PSI Air & Gas
NP-6602-1059A
O-ring (2nd stage cylinder base) Fits 95602/0087
Item No.
Part That Fits:
95602/0087
NP-6602-1060A
O-ring, cylinder (1st stage) Fits 95602/0090.
Item No.
Part That Fits:
95602/0090
NP-6602-1061A
O-ring (1st stage valve cover for 5407) Fits 95602/0057.
Item No.
Part That Fits:
95602/0057
NP-6602-1065A
O-ring (1st stage head base for 5406) Fits 95602/0088.
Item No.
Part That Fits:
95602/0088
NP-6602-1066A
O-ring (2nd stage cylinder, cover base) Fits 95602/0056.
Item No.
Part That Fits:
NP-6602-1102A
O-ring. Fits 95602/0015.
Item No.
Part That Fits:
95602/0015
NP-6602-1110A
O-ring. Fits 95602/0075
Item No.
Part That Fits:
95602/0075
Gauges
Fits Reavell® / Mako® / Compair®
NP-6613-0922A
Gauge (0 - 200 psi) Fits M2256CM.
Item No.
Part That Fits:
FUNCTION/RATING: Panel mount gauge, liquid filled.INCLUDES: Rear clamps/nuts.
003M2256CM M2256CM
NP-6613-0923A
Gauge (0 - 600 psi) Fits M2257CM.
Item No.
Part That Fits:
003M2257CM M2257CM
NP-6613-0924A
Gauge (0 - 2,000 psi) Fits M2000CM.M2260
Item No.
Part That Fits:
M2000CM 003M2000CM
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 127
NP-6613-0925A
Gauge (0 - 7,500 psi) Fits M2259CM.
Item No.
Part That Fits:
M2259CM 003M2259CM
NP-6613-0928A
Gauge (0 - 10,000 psi) Fits M2261CM.
Item No.
Part That Fits:
M2262CM 003M2261CM
Kit - Bearing
Fits Reavell® / Mako® / Compair®
NP-6603-0994AK
Bearing Kit. (for models 5404/05)
Item No.
Part That Fits:
INCLUDES: All bearings throughout entire machine, gaskets, lube grease, and sealant.
Kit - Gasket
Fits Reavell® / Mako® / Compair®
NP-6602-0996AK
Gasket/seal kit. Fits 98504/1118. (for 5404/5405) 100% made in USA
Item No.
Part That Fits:
INCLUDED: All gaskets, seals, o-rings throughout machine, sealant, grease.REQUIRED: 1 kit.
001RR98504/1118 98504/1118
Kit - Ring
Fits Reavell® / Mako® / Compair®
NP-6611-0995AK
Ring kit. (for model 5404)
Item No.
Part That Fits:
INCLUDES: 1st and 2nd stage rings, final piston/sleeve assembly, o-rings, and gaskets.ORIGIN: Made in USA.
NP-6611-1050AK
Ring kit. Fits 98477/1100-1101. (for 5405)
Item No.
Part That Fits:
INCLUDES: 1st and 2nd stage rings, final piston/sleeve assembly, o-rings, and gaskets.ORIGIN: Made in USA.
Kit - Valve
Fits Reavell® / Mako® / Compair®
NP-6601-0773AK
Valve maintenance kit, final stage. (models 5404 thru 5409). Fits 98650/1199.
Item No.
Part That Fits:
FUNCTION/RATING: Rebuilding of 3rd stage on models 5404/5405 & 4th stage on models 5406/5407/5408/5409.INCLUDES: O-rings, back plates, spring plates, peg, set screw.RECOMMENDED: 1 spare set.
98650/1199 001RR98650/1199
NP-6601-0774AK
Valve maintenance kit, (Models 5404 - 5405, 2nd stage). (Models 5406-5409, 3rd stage). Fits 98650/1215 100% made in USA
Item No.
Part That Fits:
FUNCTION/RATING: For rebuilding of 2nd stage on models 5404/5405 and 3rd stage on models 5406/5407/5408/5409.INCLUDES: O-rings, back plates, spring plates, peg, set screw.RECOMMENDED: 1 spare set.
98650/1215
COMPRESSOR PARTS
Page 128 - 05/2015 Products That Purify High PSI Air & Gas
Piston Rings
Fits Reavell® / Mako® / Compair®
NP-6611-0938A
Piston ring set (1st stage). Fits 98477/1099.
Item No.
Part That Fits:
INCLUDES: 2 compression rings and 1 oiler ring.REQUIRED: 1 set (3pcs).TIP/NOTE: Install with ring gaps opposing and topside up.ORIGIN: Asia.
98477/1099 001RR98477/1099
NP-6611-0939A
Piston ring set (2nd stage). Fits 98477/1101.
Item No.
Part That Fits:
INCLUDES: Oiler and compression rings.REQUIRED: 1 set (4pcs).TIP/NOTE: Install with ring gaps opposing.ORIGIN: Asia.
98477/1101 001RR98477/1101
NP-6611-0953A
Piston ring set. (1st stage) Fits 98477/1100.
Item No.
Part That Fits:
INCLUDES: 2 compression rings, 1 scraper ring, and 1 oiler ring.REQUIRED: 1 set (4pcs).TIP/NOTE: Install with ring gaps opposing and topside up.
98477/1100 001RR98477/1100
NP-6611-0989A
Ring set, 92mm (1st Stage). Fits 98477/1090
Item No.
Part That Fits:
NOT AVAILABLE AT THIS TIME
001RR98477/1090 98477/1090
Pistons
Fits Reavell® / Mako® / Compair®
NP-6610-0732A
Piston & sleeve (for 5404/05, Splash Type) Fits C203113/50
Item No.
Part That Fits:
INCLUDES: Pistion/plunger, liner, o-ring.RECOMMENDED: 1 spare unit.ORIGIN: 100% made in USA.
C203113/50 C201235/100 C200567
NP-6610-0950A
Piston assembly, drive (3rd stage) Fits 98438/1001
Item No.
Part That Fits:
FUNCTION/RATING: Final stage drive piston (crosshead assembly).INCLUDED: Piston, wrist pin, clips. DOES NOT include piston/sleeve.REQUIRED: 1-2 pieces.ORIGIN: 100% made in USA.
98438/1001 001RR98438/1001
NP-6610-0954A
Piston assembly (2nd stage). Fits 98438/1002, C200566
Item No.
Part That Fits:
INCLUDES: Piston, rings, wrist pin, clips.REQUIRED: 1 assembly.TIP/NOTE: Only for model 5404 & 54044. Install with ring gaps opposing.ORIGIN: Made in USA.
98438/1002 001RC200566 C200566
Running Gear, Crankshafts, Con-Rods
Fits Reavell® / Mako® / Compair®
NP-6604-0940A
Spacer, crankshaft. Fits 98660/1061
Item No.
Part That Fits:
REQUIRED: 3 pieces.ORIGIN: made in USA.
98660/1061 001RR98660/1061
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 129
NP-6604-1100A
Shim, lower con-rod. Fits 98660/1064.
Item No.
Part That Fits:
Specialty Tools and Tech Supplies
Fits Reavell® / Mako® / Compair®
NP-6613-0922A
Gauge (0 - 200 psi) Fits M2256CM.
Item No.
Part That Fits:
FUNCTION/RATING: Panel mount gauge, liquid filled.INCLUDES: Rear clamps/nuts.
003M2256CM M2256CM
NP-6613-0923A
Gauge (0 - 600 psi) Fits M2257CM.
Item No.
Part That Fits:
003M2257CM M2257CM
NP-6613-0924A
Gauge (0 - 2,000 psi) Fits M2000CM.M2260
Item No.
Part That Fits:
M2000CM 003M2000CM
NP-6613-0925A
Gauge (0 - 7,500 psi) Fits M2259CM.
Item No.
Part That Fits:
M2259CM 003M2259CM
NP-6613-0928A
Gauge (0 - 10,000 psi) Fits M2261CM.
Item No.
Part That Fits:
M2262CM 003M2261CM
Valve Heads
Fits Reavell® / Mako® / Compair®
NP-6616-0903A
Middle body, final stage. Fits C201654 - G6/M6. 100% made in USA.
Item No.
Part That Fits:
01654 C201654-G6 C201654-M6 C201654-G6/
Valves
Fits Reavell® / Mako® / Compair®
NP-6601-0773AK
Valve maintenance kit, final stage. (models 5404 thru 5409). Fits 98650/1199.
Item No.
Part That Fits:
FUNCTION/RATING: Rebuilding of 3rd stage on models 5404/5405 & 4th stage on models 5406/5407/5408/5409.INCLUDES: O-rings, back plates, spring plates, peg, set screw.RECOMMENDED: 1 spare set.
98650/1199 001RR98650/1199
NP-6601-0902A
Valve assembly, reed. Fits 98650/1310.
Item No.
Part That Fits:
98650/1310 001RR98650/1310
COMPRESSOR PARTS
Page 130 - 05/2015 Products That Purify High PSI Air & Gas
NP-6601-0959A
Valve assembly, reed. Fits 98650/1561, 98650/1311.
Item No.
Part That Fits:
98650/1561 98650/1311 001RR98650/1311
Auto Condensate Drain
Technical Supplies
NP-0015-0560A
Regulator, Pilot Pressure (300 x 6000 psi)
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
N-A
NP-0020-0553A
Timer, ACD (24 - 240 vac)
Item No.
Part That Fits:
FUNCTION/RATING: Supply 24-240vac 50/60Hz.INCLUDES: Mounting screw.TIP/NOTE: Settings are field adjustable (ON @ 0.5-45 minutes, OFF @ 2-40 seconds).
N-A
NP-0020-0555A
Power cord, ACD
Item No.
Part That Fits:
INCLUDED: Power Cord only. Timer & Solonid sold separately.
N-A
NP-0020-0661A
Solenoid Valve, ACD (115 vac)
Item No.
Part That Fits:
INCLUDES: Solenoid only (Timer and Power Cord sold separately).
N-A
NP-0020-1039A
Timer, ACD (12 - 60 vdc)
Item No.
Part That Fits:
N-A
NP-0022-0552A
Piston Tip, ACD, cylindrical style.
Item No.
Part That Fits:
RECOMMENDED: 1 spare.TIP/NOTE: Purchase piston assembly which includes this tip (use NP-0022-0551A).ORIGIN: 100% made in USA.
N-A
NP-0022-0571A
ACD, block only. (for 2 filters)
Item No.
Part That Fits:
FUNCTION/RATING: Auto draining of condensate seperators (5000psi maximum).INCLUDES: 2 drain block assembly and manual bleeders w/ safety chains.REQUIRES: Timer, solenoid, and plumbing. Kit is available (use NP-0022-0648AK).ORIGIN: 100% made in USA.
N-A
NP-0022-0572A
ACD, block only. (for 3 filters)
Item No.
Part That Fits:
FUNCTION/RATING: Auto bleeding of condensate separators (5000psi maximum).INCLUDES: 3 drain block assembly and manual bleeders w/safety chain.REQUIRES: Timer, solenoid, and plumbing. Kit is available (use NP-0022-0649AK).ORIGIN: 100% made in USA.
N-A
NP-0022-0573A
ACD, block only. (for 4 filters)
Item No.
Part That Fits:
FUNCTION/RATING: Auto bleeding of condensate seperators (5000psi maximum).INCLUDES: 4 drain block assembly and manual bleeder w/safety chain.REQUIRES: Timer, solenoid, and plumbing. Kit is available (use NP-0022-0650AK).ORIGIN: 100% made in USA.
N-A
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 131
NP-0022-0574A
ACD, block only. (for 5 filters)
Item No.
Part That Fits:
FUNCTION/RATING: Auto bleeding of condensate seperators (5000psi maximum).INCLUDES: 5 drain block assembly and manual bleeders w/safety chain.REQUIRES: Timer, solenoid, and plumbing. Kit is available (use NP-0022-0651AK).ORIGIN: 100% made in USA.
N-A
NP-0022-0577A
Seat, ACD (for Hi Stage, 2 x 6)
Item No.
Part That Fits:
NP-0022-0578A
Seat, ACD (for interstage, 4 x 6)
Item No.
Part That Fits:
NP-0022-0653A
Solenoid coil, ACD (115 vac)
Item No.
Part That Fits:
FUNCTION/RATING: Fits onto NP-0022-0544A solenoid valve.
N-A
NP-0022-0654A
Solenoid coil, ACD (230 vac)
Item No.
Part That Fits:
FUNCTION/RATING: Fits onto NP-0022-0544A solenoid valve.
N-A
NP-0022-0655A
Solenoid coil, ACD (12 vdc)
Item No.
Part That Fits:
FUNCTION/RATING: Fits onto NP-0022-0544A solenoid valve.
N-A
NP-0022-0709A
Solenoid valve, 3 way (360 psi x 240 vac)
Item No.
Part That Fits:
NP-0022-1078A
Solenoid coil, ACD (24 vac)
Item No.
Part That Fits:
N-A
Control Valves
Technical Supplies
NP-0015-0560A
Regulator, Pilot Pressure (300 x 6000 psi)
Item No.
Part That Fits:
ORIGIN: 100% made in USA.
N-A
NP-0015-1201AK
Rebuild kit for reducing regualtor. Fits NP-0015-0560A.
Item No.
Part That Fits:
COMPRESSOR PARTS
Page 132 - 05/2015 Products That Purify High PSI Air & Gas
VL-530110-AF
Priority Valve - economy version, S/S, 1/4" NPT-F (In / Out), 6000 psi
Item No.
Part That Fits:
N-A
VL-530111-AF
Relief Valve, economy version (0 - 6000 psi)
Item No.
Part That Fits:
N-A
VL-530112-BE
Line Valve, 1/4" NPT-F (In) x 1/4" NPT-M (Out), (6000 psi)
Item No.
Part That Fits:
VAL-0006
VL-530113-BD
Scuba Yoke with Bleeder (3500 psi).
Item No.
Part That Fits:
N-A
VL-530120-TE
Check Valve, 1/4" NPT-F (In / Out), S/S
Item No.
Part That Fits:
VL-530122-TE
Check Valve, 1/4" NPT-M (In / Out), S/S (6000 psi)
Item No.
Part That Fits:
VL-530124-TE
Check Valve, 1/4" NPT-F (In) 1/4" NPT-M (Out), S/S (6000 psi)
Item No.
Part That Fits:
VL-530130-TH
Relief Valve, 1/4" NPT-M (In), 1000 - 5000 psi
Item No.
Part That Fits:
N-A
VL-530131-TH
Relief Valve, 1/4" NPT-M (In), 1000 - 7000 psi
Item No.
Part That Fits:
N-A
VL-530141-TG
Priority Valve - deluxe version, 1/4" NPT-M (In) 1/4" NPT-F (Out) with S/S seat / check al e 7000 psi
Item No.
Part That Fits:
N-A
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 133
Electrical Components
Technical Supplies
NP-0020-0553A
Timer, ACD (24 - 240 vac)
Item No.
Part That Fits:
FUNCTION/RATING: Supply 24-240vac 50/60Hz.INCLUDES: Mounting screw.TIP/NOTE: Settings are field adjustable (ON @ 0.5-45 minutes, OFF @ 2-40 seconds).
N-A
NP-0020-0555A
Power cord, ACD
Item No.
Part That Fits:
INCLUDED: Power Cord only. Timer & Solonid sold separately.
N-A
NP-0020-0661A
Solenoid Valve, ACD (115 vac)
Item No.
Part That Fits:
INCLUDES: Solenoid only (Timer and Power Cord sold separately).
N-A
NP-0020-1039A
Timer, ACD (12 - 60 vdc)
Item No.
Part That Fits:
N-A
Filter - Intake (also elements)
Technical Supplies
NP-0021-0869A
Intake filter housing assembly, generic. (1" NPT-M)
Item No.
Part That Fits:
FUNCTION/RATING: Generic intake housing with a 1" NPT-male inlet stub. Good for up to 12scfm machines.INCLUDES: One filter element AA-360102-PP.RECOMMENDED: One spare filter element.
N-A
Filter - Interstage (also elements)
Technical Supplies
VL-531121-TE
Bleeder Petcock w/Stem, 1/4" BSPT-M (In), 5000 psi
Item No.
Part That Fits:
N-A
Gauges
Technical Supplies
NP-0013-0896A
Mini gauge, 1/8 CBM (100 psi)
Item No.
Part That Fits:
N-A
NP-0013-0897A
Mini gauge, 1/8 CBM (200 psi)
Item No.
Part That Fits:
N-A
COMPRESSOR PARTS
Page 134 - 05/2015 Products That Purify High PSI Air & Gas
NP-0013-0898A
Mini gauge, 1/8 CBM (750 psi)
Item No.
Part That Fits:
N-A
NP-0013-0899A
Mini gauge, 1/8 CBM (1500 psi)
Item No.
Part That Fits:
N-A
NP-0013-0900A
Mini gauge, 1/8 CBM (5000 psi)
Item No.
Part That Fits:
N-A
Kit - Auto Condensate Drain
Technical Supplies
NP-0022-0551AK
Piston assembly - ACD. (for cylindrical valve)
Item No.
Part That Fits:
INCLUDES: Tip, piston o-ring, & cover o-ring.RECOMMENDED: 1 spare.TIP/NOTE: The valve which this fits is no longer manufactured.ORIGIN: 100% made in USA.
N-A
NP-0022-0576AK
Piston kit, ACD. (manifold type ACD)
Item No.
Part That Fits:
INCLUDES: One piston and all O-rings (3 pcs).ORIGIN: made in USA.
N-A
NP-0022-0648AK
Kit, ACD system. (2 filter, 110vac)
Item No.
Part That Fits:
FUNCTION/RATING: Auto bleeding of condensate seperators (5000psi, 110vac).INCLUDES: ACD unit w/manual bleeders, timer, solenoid, plumbing, and instructions.RECOMMENDED: Optional silencer/collector kit.ORIGIN: Made in USA.
N-A
NP-0022-0649AK
Kit, ACD system. (3 filter, 115vac)
Item No.
Part That Fits:
FUNCTION/RATING: Auto bleeds condensate seperators. (5000psi, 110vac).INCLUDES: ACD unit w/manual bleeders, timer, solenoid, plumbing, and instructions.RECOMMENDED: Optional silencer/collector kit.TIP/NOTE: Other voltages available.
N-A
NP-0022-0650AK
Kit, ACD system. (4 filter, 115vac)
Item No.
Part That Fits:
FUNCTION/RATING: Auto bleeding of condensate seperators (5000psi, 110vac).INCLUDES: ACD unit w/manual bleeders, timer, solenoid, plumbing, and instructions.RECOMMENDED: Optional silencer/collector kit.TIP/NOTE: Other voltages available.
N-A
NP-0022-0651AK
Kit, ACD system. (5 filter, 115vac)
Item No.
Part That Fits:
FUNCTION/RATING: Auto bleeding of condensate seperators (5000psi, 110vac).INCLUDES: ACD unit w/manual bleeders, timer, solenoid, plumbing, and instructions.RECOMMENDED: Optional silencer/collector kit.ORIGIN: Made in USA.
N-A
NP-0022-0881AK
Kit, ACD system. (2 filters, 230vac)
Item No.
Part That Fits:
FUNCTION/RATING: Auto bleeding of condensate seperators (5000psi, 230vac).INCLUDES: ACD unit w/manual bleeders, timer, solenoid, plumbing, and instructions.RECOMMENDED: Optional silencer/collector kit.ORIGIN: Made in USA.
N-A
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 135
NP-0022-0882AK
Kit, ACD system. (3 filters, 230vac)
Item No.
Part That Fits:
FUNCTION/RATING: Auto bleeds condensate seperators (5000psi, 230vac).INCLUDES: ACD unit w/manual bleeders, timer, solenoid, plumbing, and instructions.RECOMMENDED: Optional silencer/collector kit.TIP/NOTE: Other voltages available.
N-A
Plumbing, Pipe, Hose, Fittings
Technical Supplies
NP-0022-0561A
Hose assembly. (6000 psi, #4 JIC Swv, 3 ft)
Item No.
Part That Fits:
FUNCTION/RATING: 5000psi x 3ft long.INCLUDES: End fittings which are #4 flare swivel.
TU-530008-AC
Flexible HP Tubing, (Plastic 1/8" OD, 850 psi).
Item No.
Part That Fits:
TU-530010-TF
Rigid HP Tubing, (S/S 6 mm OD, 5000 psi)
Item No.
Part That Fits:
TU-530012-AC
Rigid HP Tubing (Aluminum, 12 mm OD, 2000psi)
Item No.
Part That Fits:
TU-530016-TE
Rigid HP Tubing (S/S 1/8" OD, 6000 psi)
Item No.
Part That Fits:
TU-530017-TF
Rigid HP tubing (S/S 1/4" OD, 5000 psi)
Item No.
Part That Fits:
TU-530018-TF
Rigid HP tubing (S/S 3/8" OD, 5000 psi)
Item No.
Part That Fits:
Specialty Tools and Tech Supplies
Technical Supplies
NP-0013-0896A
Mini gauge, 1/8 CBM (100 psi)
Item No.
Part That Fits:
N-A
NP-0013-0897A
Mini gauge, 1/8 CBM (200 psi)
Item No.
Part That Fits:
N-A
COMPRESSOR PARTS
Page 136 - 05/2015 Products That Purify High PSI Air & Gas
NP-0013-0898A
Mini gauge, 1/8 CBM (750 psi)
Item No.
Part That Fits:
N-A
NP-0013-0899A
Mini gauge, 1/8 CBM (1500 psi)
Item No.
Part That Fits:
N-A
NP-0013-0900A
Mini gauge, 1/8 CBM (5000 psi)
Item No.
Part That Fits:
N-A
NP-0020-1039A
Timer, ACD (12 - 60 vdc)
Item No.
Part That Fits:
N-A
TU-530008-AC
Flexible HP Tubing, (Plastic 1/8" OD, 850 psi).
Item No.
Part That Fits:
TU-530010-TF
Rigid HP Tubing, (S/S 6 mm OD, 5000 psi)
Item No.
Part That Fits:
TU-530012-AC
Rigid HP Tubing (Aluminum, 12 mm OD, 2000psi)
Item No.
Part That Fits:
TU-530016-TE
Rigid HP Tubing (S/S 1/8" OD, 6000 psi)
Item No.
Part That Fits:
TU-530017-TF
Rigid HP tubing (S/S 1/4" OD, 5000 psi)
Item No.
Part That Fits:
TU-530018-TF
Rigid HP tubing (S/S 3/8" OD, 5000 psi)
Item No.
Part That Fits:
COMPRESSOR PARTS
www.Lawrence-Factor.com 05/2015 - Page 137
VL-530112-BE
Line Valve, 1/4" NPT-F (In) x 1/4" NPT-M (Out), (6000 psi)
Item No.
Part That Fits:
VAL-0006
VL-530113-BD
Scuba Yoke with Bleeder (3500 psi).
Item No.
Part That Fits:
N-A
VL-530120-TE
Check Valve, 1/4" NPT-F (In / Out), S/S
Item No.
Part That Fits:
VL-530122-TE
Check Valve, 1/4" NPT-M (In / Out), S/S (6000 psi)
Item No.
Part That Fits:
VL-530124-TE
Check Valve, 1/4" NPT-F (In) 1/4" NPT-M (Out), S/S (6000 psi)
Item No.
Part That Fits:
VL-530130-TH
Relief Valve, 1/4" NPT-M (In), 1000 - 5000 psi
Item No.
Part That Fits:
N-A
VL-530131-TH
Relief Valve, 1/4" NPT-M (In), 1000 - 7000 psi
Item No.
Part That Fits:
N-A
VL-530141-TG
Priority Valve - deluxe version, 1/4" NPT-M (In) 1/4" NPT-F (Out) with S/S seat / check al e 7000 psi
Item No.
Part That Fits:
N-A
VL-531121-TE
Bleeder Petcock w/Stem, 1/4" BSPT-M (In), 5000 psi
Item No.
Part That Fits:
N-A
COMPRESSOR PARTS
Page 138 - 05/2015 Products That Purify High PSI Air & Gas
BearingsLike the joints in your wrist, a compressors bearings are key to its’ motion. In the case of a hi-psi compressor they rotate at super high speeds, as much as 2000 RPM, generating incredible levels of friction and heat.
TMHere’s why New Part bearings will endure:
Ÿ Contact surfaces are ground to Micro Finishes & tolerances of 0.00001”.Ÿ Materials are tempered to matching
hardness. This ensures reduced frictional wear and long lasting bearings.Ÿ Bearing races are designed so as to
facilitate ease of compressor re-assembly.
Pistons and Piston Rings2At reciprocating speeds of up to 2400ft /sec fps - you can imagine the
inertial thrust that a piston must withstand. In the case of a piston in a hi-psi compressor - add top end pressures of over 6000 psi, friction generated at (as much as) 2000 cycles per minute, and temperatures at over 400 degrees.
Like the pistons that carry them, piston rings are seeing some of the toughest operating conditions in the compressor - high speeds, great friction, and sweltering temperatures. Acting as a seal against the cylinder wall - the ring prevents compressed gas from escaping through the backside of the piston, hence building pressure instead. Meanwhile, it’s important that the rings carry a film of lubricating oil but not so much as to act like an oil pump. They have to wipe away any debris but without scoring or damaging the cylinder wall. It’s a demanding job.
TMHere’s why New Part pistons rings will endure those demands:
Ÿ Phosphate or Chromed Coatings facilitate long shelf life, longer running lives, corrosion resistance, and better wear properties.Ÿ Tightest Possible Ring Gaps reduce “blow-by”
- thus gaining maximum output of compressed air/gas. Even after cylinders begin to show signs of wear - the rings still have sufficient expansion potential without the ring-gap opening beyond acceptable limits.
Gaskets, Seals, and O-ringsA seal is much more than just a slice of paper or a strip of rubber. Somerubbers will dissolve in synthetic oils, and some papers will deteriorateunder pressure. So many factors must be considered when designing aseal. - factors such as:Ÿ FitŸ Operating ConditionsŸ Exposure to Corrosives - especially longevity
Because that seal needs to hold up until the next service intervalTMsometimes decades. New Part gaskets & seals will endure - here are
the reasons:Ÿ Gasket materials are the sturdiest
available.Ÿ Materials that resist shrinkage &
warping during storage & some of which are reinforced for extra resistance to the forces of gas pressure.Ÿ Complicated shapes are cut to
exacting dimensions using laser guided cutters and jets.Ÿ All rubber parts are selected for appropriate hardness, material,
and ability to resist exposure to corrosives.
ValvesCompressor Valves operate at very high speeds and under extremes of temperature, impact, and corrosives. Valves have to endure relentless
TMhours of abuse without giving up - here are the reasons New Part valves will endure:
Ÿ Materials are selected based on ruggedness; materials whose performance characteristics are further ENHANCED BY THERMAL TEMPERING AND ADDING SURFACE COATINGS.Ÿ All RUNNING EDGES ARE POLISHED in
order to prevent “hang up” of interfacing parts. This also facilitates smooth gas flow and disables carbon from depositing.
TMNaturally, New Part valves are designed to perform exceptionally well.But just as importantly . . . they are designed to INSTALL EXCEPTIONALLYEASILY - helping you to Do-It-Yourself, without exception.
Valve HeadsLike the cylinder head on any machine - a compressor head fitted to a
®Bauer Compressor expects to do a ton of grunt work. And “ton”accurately sums up the load that the head must bear - many tons, infact. And when you consider that some high-pressure heads work at upto 6000 psi - that’s as much as 3 tons of force on every square inch of
TMsurface! Here are the reasons New Part valve heads will endure thatforce:
Ÿ Created of SOLID INGOT OF AEROSPACEALUMINUM - by precision machining rather than less solid casting methods.Ÿ All THREADED AREAS ARE SPUN INTO THE
HEAD by tool interpolation. This allows us to maintain thread accuracy much better than using a tap, which is subject to wear. Every single thread is then checked with an inspection gauge.Ÿ In many cases, hard coatings are applied
to outer surfaces. THIS “SKIN” PROMOTES LONGER LIFE DUE TO RESISTANCE AGAINST CORROSION AND GAULING.
Service KitsWhether your compressor is in need of a tune up or a complete
overhaul, our kits make it easier.
Ÿ They include every necessary part to perform the entire job. Ÿ Nothing is left to chance. Ÿ You only order one part
number.
For help and advice contact
our customer service department or visit our website at:
www.Compressor-Parts.com
When ordering kits, be sure to let us know the make, model, vintage,
and serial number for your compressor.
Glossary of Breathing Air Termsreprinted from the High pressure Breathing Air Handbook
with permission from Breathing Air Systems
ABSOLUTE PRESSURE: The atmospheric pressure, at sea level is 14.7 psi (actually 14.69 psi.) A pressure gauge, at sea level, would, of course, read ZERO. There remains this same 14.7 psi difference between absolute pressure and gauge pressure, at any pressure.
ACFM or ACTUAL CUBIC FEET PER MINUTE: This is the measurement of a compressor's static cfm output, with the back-pressure on the compressor held constant at a certain pressure. When the ACFM is measured with the compressor working against its highest intended working pressure, a true comparison of the compressor's efficiency can be made. Another term used for this measurement is FREE AIR DELIVERY, (FAD), at a stated back-pressure.
ABSORB: This speaks to the property of a media placed in the compressor's purification system. A media which ABSORBS a contaminant actually soaks it up and draws it within itself, much as a sponge absorbs water.
ADSORB: This is the property of a material which has the propensity to collect a contaminant by means of causing it to adhere to its outer surface.
ACDS, (AUTOMATIC CONDENSATE DRAIN SYSTEM): By means of an electric timer, a solenoid valve is momentarily energized every 15-18 minutes of operation, and each of the system's separators automatically drained of accumulated liquid. Without this feature, the operator must manually drain the separators four times during each hour of operation. The ACDS is a very convenient feature, and also provides assurance that the separators will be drained. The consequences of the failure to timely drain these separators are mechanical damage to the compressor, or the disabling of the system's purification system, through saturation. However, the ACDS itself requires regular monitoring and routine maintenance.
ACTIVATED CARBON: Charcoal obtained by the destructive distillation of vegetable matter and important as an adsorbent of gases and vapors.
AFTERCOOLER: Heat exchangers used for the cooling of the air after it leaves the final stage of the compressor. With air-cooled compressors, the aftercooler is usually a length of finned tubing, coiled in the flow of the cooling air.
AIR CONTROL PANEL: May be wall-mounted, but is more typically associated with the fill station. Valves, gauges, and regulators are mounted in the air control panel to regulate and control the flow to and from the storage bank, fill hoses, etc. While extremely elaborate air control panels are often used, it is my opinion that the most “basic” design that will accomplish the need is usually the best approach. Most system operators appreciate an air control system that is straight-forward and easy to think through.
AIR-COOLED COMPRESSORS: This design incorporates a fan or blower which directs a high-flow stream of air over the compressor block, heads, intercoolers, and aftercooler.
AIR FLOW: Usually measured in cubic feet per minute, (CFM), in our applications; generally used to speak of the output of a compressor or the amount of air flowing through a line. It can be measured with a flow meter, or by means of timing the flow of a known quantity of air.
AIR LINE RESPIRATOR: This describes a breathing system in which the user is provided air through an air line, or “umbilical” hose. Most often, the pressure in this hose is no more than 75-125 psi. The air can be supplied with a compressor, or from a bank of storage cylinders, (with the pressure reduced by a regulator to the required line pressure), or a combination of both. For extremely long runs of hose, using these relatively low pressures, larger hose interior diameters must sometimes be used. Consult the hose manufacturer for these recommendations. Air-line respirators differ from respirators in that an air supply is involved; generally, the description of a respirator means only a face mask with attached filter canisters.
AIR PURITY ANALYSIS: Usually conducted in a laboratory, where test conditions can be carefully controlled. (The NFPA recommends the use of only accredited laboratories). The laboratory usually provides the apparatus with which the air sample is taken and shipped. Upon completion of the test, the laboratory usually provides a print-out of all of the constituents of the air, and, if it meets all of the standards, a certificate. If the sample fails the analysis, the laboratory sometimes can suggest the means of correcting the situation which caused it. Since MOISTURE CONTENT is not a stated factor of most air purity standards, some laboratories will not test for moisture except as an extra cost. Even so, the compressor owner must insist on a moisture measurement. The NFPA currently recommends at least four air purity tests each year.
AMBIENT: Surrounding, encircling, encompassing. The air surrounding you can be called the ambient air. The temperature in a room where a compressor is located can be called the ambient temperature. Humidity and pressure can also be referred to as ambient, at a given location.
BLEEDER VALVE: Usually smaller than a line valve, this valve is most commonly used to bleed the trapped air from a line or vessel. For example, when the supply valve to a pressurized fill line is closed, and the full cylinder's valve is closed, the bleeder valve, positioned between the two, will relieve the pressure from the fill hose, so that an easier disconnection of the filler attachment can be made. Sometimes also referred to as a PURGE valve.
BLOCK: Used within the industry to describe the assembly comprised of the compressor crankcase with cylinders, cylinder heads, intercoolers, aftercooler, interstage separators, interstage safety relief valves, and drive pulley attached. With low pressure compressors, this assembly is more often called the HEAD.
BOOSTER PUMP: A one or two stage closed-loop mini-compressor which is capable of accepting air at a lower pressure and boosting it to a higher pressure. These are available powered by an electric motor, or powered by 100-150 psi of air pressure. The majority of those in service are of the latter type, utilizing a fraction of the supply air for power, making them completely self-contained.
BURST DISC: This is descriptive of a one-time safety device, typically built into cylinder valves. Instead of a spring-loaded poppet valve, it is a disc of frangible metal, (often copper, or an alloy thereof), held in place over an orifice. The size of this orifice and the strength of the disc are such that the disc will burst, at a certain predetermined pressure. This design burst pressure is usually 5/3, (166%), of the cylinder's working pressure. Once
GLOSSARY
www.Lawrence-Factor.com 05/2015 - Page 139
ruptured, the entire burst disc assembly must be replaced. In most modern cylinders, the air escaping from a ruptured burst disc will be directed in two or four opposing directions, so the cylinder will not be “jet propelled” violently. In cylinders that are repeatedly emptied and refilled, the burst disc can sometimes be flexed so often that some fatigue occurs, allowing the disc to eventually rupture at a pressure well below its design pressure. Burst disc assemblies are relatively inexpensive, and should be replaced periodically, if these conditions exist. Some authorities recommend that the burst disc assembly on a cylinder be replaced each time the cylinder is hydrostatically retested.
BURST PRESSURE: All compressor components, pressure vessels, hoses, tubing, etc., are constructed to a design burst pressure, meaning that the product can be expected to FAIL at that pressure. This has an entirely different meaning than the designed working pressure for that product. Depending on the intended safety ratio, the stated working pressure of the product will be a fraction of the burst pressure.
CARBON MONOXIDE INDICATOR: The CO indicator was typically used as an in-line visual check of gross Carbon Monoxide contamination in air. A color-change element was viewed through a transparent port, in which a usually high CO level was expected to change the color of the element from (usually) yellow to gray. The indicator, of course, was incapable of calling attention to itself, and tended to be rather hard to interpret, particularly by those people with some degree of color-blindness.
CARBON MONOXIDE MONITOR: An electronic device with a gas-sensitive electronic sensor. Quite accurate, when calibrated properly, and capable of providing a digital read-out of the exact Carbon Monoxide content of the air, in parts per million (ppm), and, if desired, providing for audible or visual alarms when the CO level exceeds a pre-set level. Most electronic CO monitors can also be used to automatically shut the equipment off, when this threshold is exceeded. The heart of the monitor is the sensor. These eventually must be replaced, typically every 2-5 years. One of two different types of sensors is usually used. The metal oxide type of sensor requires that the monitor be constantly powered, with a constant flowing air sample. When power or air flow is interrupted, these sensors may take several hours to re-stabilize. Electro-chemical sensors, on the other hand, only require about a minute or less to stabilize, when turned on.
COMPRESSOR BLOCK: In industry terminology, the compressor block consists of the compressor crankcase, cylinders, heads, intercoolers, aftercoolers, and inter-stage separators, all as an assembled unit ready to be powered and operated. Also known as a compressor head, usually when speaking of lower-pressure compressors.
CAPACITY: Usually a term for the quantity that a container or vessel can hold, this term also is used to describe the volume rate of a compressor's output.
CARBON: In respect to compressors, carbon is a potential service concern; generally caused by a residue of the lubricating oil carbonizing on surfaces that are too hot. When a carbon deposit forms between a head valve and its seat, or a small piece of dislodged carbon lodges in that position, the seal will be lost, and the compressor will malfunction.
CARTRIDGE-IMBEDDED SENSOR SYSTEMS: A component of advanced purification systems, an electronic sensor device placed directly in the final purification cartridge senses when the cartridge is approaching the end of its service life. At this point, a yellow light alarm is provided to the operator. If the operator does not replace this cartridge within the 4 or 5 hours still remaining in its service life, the sensor provides a red light, and shuts down of the compressor system. With this device, the entire service life of the cartridge can be utilized, and, at the same time, it is impossible to operate the air system with a spent cartridge in place.
CARTRIDGE, PURIFICATION: The word cartridge, in this application, indicates a pre-packed expendable replacement cartridge intended to be discarded when spent. Depending on its duty function, the purification cartridge will be packed with different materials to perform different functions in the processing of the air. If the purification system incorporates only one cartridge, layers of all of these materials will be packed in that one cartridge. In multi-chamber purification systems, all of the cartridges prior to the final cartridge will usually contain only desiccant materials.
Cartridges should not be reused, dried out, or repacked. All cartridges have an “expiration date”, beyond which they should be discarded and not used. When replacing the cartridges in a purification system, the date and hour meter reading should be recorded on the system's maintenance log, and many operators also mark this data on the new cartridge itself.
CASCADE METHOD: This refers to the working of a multi-vessel air storage system utilizing only one vessel at a time, in sequence, and closing the valve on that vessel before using the next. In this respect, the word “cascade” is a verb. When refilling from a multi-vessel storage system into smaller bottles, more small bottles will be completely refilled using this method, than would be affected by opening all of the storage vessels at the same time.
CASCADE SYSTEM: A term still commonly used to describe a multi-vessel air storage system.
CATALYTIC CONVERSION: The process by which the molecules of a gas are converted to a different structure, forming a different gas. In the case of the air system's purification system, this process is functioned by a catalyst packed in the final purification cartridge, and converts Carbon Monoxide to Carbon Dioxide. This catalyst will continue to function as long as it is absolutely dry, so the catalyst is always located after the dissicant. This conversion, however, can only process a certain level of Carbon Monoxide content, and if the incoming air contains more than approximately 400 ppm of Carbon Monoxide, the excess will simply pass on through, unconverted.
CFM (Cubic Feet per Minute): A cubic foot, of course, would be the free air in a space measuring 12" X 12" X 12". A telephone booth measuring 4' X 4' X 8' would contain 128 cubic feet. A compressor capable of pumping 10.7 cfm would pump 128 cu. ft. in approximately 12 minutes.
CHARGING RATE: This is the measure of a compressor's output based on its average output over the span of time required to fill a cylinder of a known capacity from a certain pressure to a certain pressure. To date, however, there exist no industry standards for this measurement, and manufacturers are free to choose the criteria which produce the results most conducive to the desired claims.
CHASSIS: In compressor terms, this is the frame on which the compressor block and the driver are mounted. In most modern units, the purification system will also be mounted on the chassis,along with the electrical control enclosure, the final separator, the gauge panel (if so equipped), and the other accessories that pertain to the operation of the compressor and purification system. Often, the chassis is described as being of vertical configuration, with the driver mounted under the compressor, or horizontal, meaning that the compressor and the driver are mounted side-by-side.
CHECK VALVE: A valve that automatically permits air flow in one direction only.
CLOSED LOOP: Describes an air flow completely contained in a closed circuit, without the possibility of contamination from air outside of the loop. Usually used to describe the method of boosting air pressure from a bank of purified stored air into the cylinders being refilled, thereby eliminating the entry of contaminants into the air stream.
COMPOSITE CYLINDER: A pressure vessel combining a rather thin aluminum alloy “shell”, over-wrapped with a resinoid fabric of exceptional strength. The benefit: lighter weight. Composite cylinders are somewhat more subject to damage from exterior abuse, and should be removed from service if the over-wrap shows evidence of undue wear. As of this date, composite cylinders are approved for a maximum service life of 15 years.
COMPRESSIBILITY: A factor which expresses the deviation of a gas from the laws of hydraulics. Gases vary in their compressibility, while most liquids are, for most practical purposes, incompressible.
COMPRESSION RATIO: The ratio of the absolute discharge pressure to the absolute inlet pressure. Absolute pressure at the inlet of a compressor, at sea level, would be 14.7 psi. (Gauge pressure would be zero.) If the outlet pressure at the discharge side of a compressor's first stage was 88 psi (absolute), this would be said to be a 6 to 1 (6:1) compression ratio. Remember, however, that 88 psi absolute pressure would be read on a gauge as about 73 psi.
CONDENSATE: The liquid which accumulates in the separators, and which must be drained regularly. In an oil-lubricated compressor, this liquid will usually be the color of skim milk, though it may be somewhat dark during the compressor's break-in period. After the compressor is broken in, if this condensate liquid turns quite dark or exceptionally oily, this condition may be a first indication that a problem could exist with the compressor.
CONDENSATE TRAP, CONDENSATE DRAIN: (See SEPARATOR) The condensate drain is the outlet at the lowest point of the separator, from which the accumulated liquid can be drained. On units not equipped with an automatic drain system, a petcock will be located at this point. (This petcock is to be opened momentarily for draining while the chamber is pressurized, and should never be left in an effort to provide constant draining.)
CONTAMINANTS: Any element in the breathing air than is potentially harmful to the breather of the air. Carbon Monoxide and oil droplets or oil vapor are two of the contaminants of the greatest concern.
CRANKSHAFT THROW: The point on the crankshaft to which the connecting rods are attached. Unlike automobile engines, most multi-stage air compressors have only one throw, to which all of the connecting rods are attached. The measurement by which the center line of the throw is different from the center line of the crankshaft determines half the stroke of the piston.
CYLINDER: Two definitions: A cylinder is a container or vessel in which a pressurized gas is stored. (always cylindrical) On a compressor or engine, the cylinder is the bore through which the piston moves.
CYLINDER HEAD: The compression cylinder is closed on top with a removable head, into which are usually built the intake and outlet valves for that cylinder. In the case of air-cooled compressors, the cylinder head is usually finned, to help transfer heat away.
DEALER: A seller of equipment, usually working through a manufacturer's regional distributor. There are some dealers who can provide field service, either limited or full-scale, while others may rely on the distributor to provide this; Responsive, capable dealer sale able to provide pre-specification consultation, budget estimates, and application expertise.
DEFLECTOR TUBE: A part of the Fill Station, the deflector tube accepts the bottle to be filled and holds it in place during the refilling process. In most fill stations, the deflector tube(s) are circular, and constructed of thick-walled metal, to help contain the fragments of a rupturing cylinder.
DESICCANT: A drying agent or media, as used as the first element in a modern purification cartridge.
DISPLACEMENT: The displacement of a compressor is the volume swept by the piston per unit of time. Usually expressed as cubic feet per minute. This is not a direct measurement of a compressor's output, however, as compressors vary greatly in their air leakage and valve efficiency.
DISTRIBUTOR: Most major manufacturers have established a network of servicing distributors. To qualify, the distributor must stock systems and parts, maintain a full-scale repair shop staffed with factory-certified technicians, and provide field service. Distributors, in turn, usually establish a network of regional dealers within their marketing area, and provide end-user service for those dealers without this capability. In those regions in which a dealer is not established, the distributor may sell directly to the end users.
DOOR INTERLOCK: Usually denotes the device installed on a Class 2 fill station which precludes the filling of cylinders if the protective door is left open. May also describe micro switches which are sometimes installed on room or compartment doors for the purpose of causing the door to be opened (for ventilation), before the compressor can be operated.
DOUBLE-ACTING PISTON: The double-acting piston is designed to compress the air in more than one stage at a time, either by “stacking” one cylinder or stage on top of another, or by compressing air in separate chambers on both the “up” and the “down” stroke. Thus, one connecting rod is used to compress air in two chambers. It is more difficult to carry away the added heat that this method produces.
DRAIN CYCLE: Refers to the interval between the recommended manual draining of the separator chambers, or between the automatic drain system's activation. In general, it is suggested that the drain cycle interval be shortened, somewhat, under unusually high ambient humidity conditions.
EFFICIENCY, VOLUMETRIC: Ratio of actual capacity (output) to the piston displacement, stated as a percentage. In high pressure multi-stage compressors, one design may have an efficiency rate of only around 60%, while another may achieve 75%, or more.
EXTENDED WARRANTY: A contract with the supplier in which the original factory warranty is extended, for an annual fee. With the extended warranty, some suppliers also include routine scheduled on-site maintenance service calls, and perform any needed interim service on-site, at the compressor's location. Others may provide no field service at all, and perform any needed warranty work in their own shop, or at the factory, with the owner paying for the transportation to the shop. Most extended warranties provided by compressor suppliers do not cover electric motors or fueled engines.
GLOSSARY
Page 140 - 05/2015 Products That Purify High PSI Air & Gas
ruptured, the entire burst disc assembly must be replaced. In most modern cylinders, the air escaping from a ruptured burst disc will be directed in two or four opposing directions, so the cylinder will not be “jet propelled” violently. In cylinders that are repeatedly emptied and refilled, the burst disc can sometimes be flexed so often that some fatigue occurs, allowing the disc to eventually rupture at a pressure well below its design pressure. Burst disc assemblies are relatively inexpensive, and should be replaced periodically, if these conditions exist. Some authorities recommend that the burst disc assembly on a cylinder be replaced each time the cylinder is hydrostatically retested.
BURST PRESSURE: All compressor components, pressure vessels, hoses, tubing, etc., are constructed to a design burst pressure, meaning that the product can be expected to FAIL at that pressure. This has an entirely different meaning than the designed working pressure for that product. Depending on the intended safety ratio, the stated working pressure of the product will be a fraction of the burst pressure.
CARBON MONOXIDE INDICATOR: The CO indicator was typically used as an in-line visual check of gross Carbon Monoxide contamination in air. A color-change element was viewed through a transparent port, in which a usually high CO level was expected to change the color of the element from (usually) yellow to gray. The indicator, of course, was incapable of calling attention to itself, and tended to be rather hard to interpret, particularly by those people with some degree of color-blindness.
CARBON MONOXIDE MONITOR: An electronic device with a gas-sensitive electronic sensor. Quite accurate, when calibrated properly, and capable of providing a digital read-out of the exact Carbon Monoxide content of the air, in parts per million (ppm), and, if desired, providing for audible or visual alarms when the CO level exceeds a pre-set level. Most electronic CO monitors can also be used to automatically shut the equipment off, when this threshold is exceeded. The heart of the monitor is the sensor. These eventually must be replaced, typically every 2-5 years. One of two different types of sensors is usually used. The metal oxide type of sensor requires that the monitor be constantly powered, with a constant flowing air sample. When power or air flow is interrupted, these sensors may take several hours to re-stabilize. Electro-chemical sensors, on the other hand, only require about a minute or less to stabilize, when turned on.
COMPRESSOR BLOCK: In industry terminology, the compressor block consists of the compressor crankcase, cylinders, heads, intercoolers, aftercoolers, and inter-stage separators, all as an assembled unit ready to be powered and operated. Also known as a compressor head, usually when speaking of lower-pressure compressors.
CAPACITY: Usually a term for the quantity that a container or vessel can hold, this term also is used to describe the volume rate of a compressor's output.
CARBON: In respect to compressors, carbon is a potential service concern; generally caused by a residue of the lubricating oil carbonizing on surfaces that are too hot. When a carbon deposit forms between a head valve and its seat, or a small piece of dislodged carbon lodges in that position, the seal will be lost, and the compressor will malfunction.
CARTRIDGE-IMBEDDED SENSOR SYSTEMS: A component of advanced purification systems, an electronic sensor device placed directly in the final purification cartridge senses when the cartridge is approaching the end of its service life. At this point, a yellow light alarm is provided to the operator. If the operator does not replace this cartridge within the 4 or 5 hours still remaining in its service life, the sensor provides a red light, and shuts down of the compressor system. With this device, the entire service life of the cartridge can be utilized, and, at the same time, it is impossible to operate the air system with a spent cartridge in place.
CARTRIDGE, PURIFICATION: The word cartridge, in this application, indicates a pre-packed expendable replacement cartridge intended to be discarded when spent. Depending on its duty function, the purification cartridge will be packed with different materials to perform different functions in the processing of the air. If the purification system incorporates only one cartridge, layers of all of these materials will be packed in that one cartridge. In multi-chamber purification systems, all of the cartridges prior to the final cartridge will usually contain only desiccant materials.
Cartridges should not be reused, dried out, or repacked. All cartridges have an “expiration date”, beyond which they should be discarded and not used. When replacing the cartridges in a purification system, the date and hour meter reading should be recorded on the system's maintenance log, and many operators also mark this data on the new cartridge itself.
CASCADE METHOD: This refers to the working of a multi-vessel air storage system utilizing only one vessel at a time, in sequence, and closing the valve on that vessel before using the next. In this respect, the word “cascade” is a verb. When refilling from a multi-vessel storage system into smaller bottles, more small bottles will be completely refilled using this method, than would be affected by opening all of the storage vessels at the same time.
CASCADE SYSTEM: A term still commonly used to describe a multi-vessel air storage system.
CATALYTIC CONVERSION: The process by which the molecules of a gas are converted to a different structure, forming a different gas. In the case of the air system's purification system, this process is functioned by a catalyst packed in the final purification cartridge, and converts Carbon Monoxide to Carbon Dioxide. This catalyst will continue to function as long as it is absolutely dry, so the catalyst is always located after the dissicant. This conversion, however, can only process a certain level of Carbon Monoxide content, and if the incoming air contains more than approximately 400 ppm of Carbon Monoxide, the excess will simply pass on through, unconverted.
CFM (Cubic Feet per Minute): A cubic foot, of course, would be the free air in a space measuring 12" X 12" X 12". A telephone booth measuring 4' X 4' X 8' would contain 128 cubic feet. A compressor capable of pumping 10.7 cfm would pump 128 cu. ft. in approximately 12 minutes.
CHARGING RATE: This is the measure of a compressor's output based on its average output over the span of time required to fill a cylinder of a known capacity from a certain pressure to a certain pressure. To date, however, there exist no industry standards for this measurement, and manufacturers are free to choose the criteria which produce the results most conducive to the desired claims.
CHASSIS: In compressor terms, this is the frame on which the compressor block and the driver are mounted. In most modern units, the purification system will also be mounted on the chassis,along with the electrical control enclosure, the final separator, the gauge panel (if so equipped), and the other accessories that pertain to the operation of the compressor and purification system. Often, the chassis is described as being of vertical configuration, with the driver mounted under the compressor, or horizontal, meaning that the compressor and the driver are mounted side-by-side.
CHECK VALVE: A valve that automatically permits air flow in one direction only.
CLOSED LOOP: Describes an air flow completely contained in a closed circuit, without the possibility of contamination from air outside of the loop. Usually used to describe the method of boosting air pressure from a bank of purified stored air into the cylinders being refilled, thereby eliminating the entry of contaminants into the air stream.
COMPOSITE CYLINDER: A pressure vessel combining a rather thin aluminum alloy “shell”, over-wrapped with a resinoid fabric of exceptional strength. The benefit: lighter weight. Composite cylinders are somewhat more subject to damage from exterior abuse, and should be removed from service if the over-wrap shows evidence of undue wear. As of this date, composite cylinders are approved for a maximum service life of 15 years.
COMPRESSIBILITY: A factor which expresses the deviation of a gas from the laws of hydraulics. Gases vary in their compressibility, while most liquids are, for most practical purposes, incompressible.
COMPRESSION RATIO: The ratio of the absolute discharge pressure to the absolute inlet pressure. Absolute pressure at the inlet of a compressor, at sea level, would be 14.7 psi. (Gauge pressure would be zero.) If the outlet pressure at the discharge side of a compressor's first stage was 88 psi (absolute), this would be said to be a 6 to 1 (6:1) compression ratio. Remember, however, that 88 psi absolute pressure would be read on a gauge as about 73 psi.
CONDENSATE: The liquid which accumulates in the separators, and which must be drained regularly. In an oil-lubricated compressor, this liquid will usually be the color of skim milk, though it may be somewhat dark during the compressor's break-in period. After the compressor is broken in, if this condensate liquid turns quite dark or exceptionally oily, this condition may be a first indication that a problem could exist with the compressor.
CONDENSATE TRAP, CONDENSATE DRAIN: (See SEPARATOR) The condensate drain is the outlet at the lowest point of the separator, from which the accumulated liquid can be drained. On units not equipped with an automatic drain system, a petcock will be located at this point. (This petcock is to be opened momentarily for draining while the chamber is pressurized, and should never be left in an effort to provide constant draining.)
CONTAMINANTS: Any element in the breathing air than is potentially harmful to the breather of the air. Carbon Monoxide and oil droplets or oil vapor are two of the contaminants of the greatest concern.
CRANKSHAFT THROW: The point on the crankshaft to which the connecting rods are attached. Unlike automobile engines, most multi-stage air compressors have only one throw, to which all of the connecting rods are attached. The measurement by which the center line of the throw is different from the center line of the crankshaft determines half the stroke of the piston.
CYLINDER: Two definitions: A cylinder is a container or vessel in which a pressurized gas is stored. (always cylindrical) On a compressor or engine, the cylinder is the bore through which the piston moves.
CYLINDER HEAD: The compression cylinder is closed on top with a removable head, into which are usually built the intake and outlet valves for that cylinder. In the case of air-cooled compressors, the cylinder head is usually finned, to help transfer heat away.
DEALER: A seller of equipment, usually working through a manufacturer's regional distributor. There are some dealers who can provide field service, either limited or full-scale, while others may rely on the distributor to provide this; Responsive, capable dealer sale able to provide pre-specification consultation, budget estimates, and application expertise.
DEFLECTOR TUBE: A part of the Fill Station, the deflector tube accepts the bottle to be filled and holds it in place during the refilling process. In most fill stations, the deflector tube(s) are circular, and constructed of thick-walled metal, to help contain the fragments of a rupturing cylinder.
DESICCANT: A drying agent or media, as used as the first element in a modern purification cartridge.
DISPLACEMENT: The displacement of a compressor is the volume swept by the piston per unit of time. Usually expressed as cubic feet per minute. This is not a direct measurement of a compressor's output, however, as compressors vary greatly in their air leakage and valve efficiency.
DISTRIBUTOR: Most major manufacturers have established a network of servicing distributors. To qualify, the distributor must stock systems and parts, maintain a full-scale repair shop staffed with factory-certified technicians, and provide field service. Distributors, in turn, usually establish a network of regional dealers within their marketing area, and provide end-user service for those dealers without this capability. In those regions in which a dealer is not established, the distributor may sell directly to the end users.
DOOR INTERLOCK: Usually denotes the device installed on a Class 2 fill station which precludes the filling of cylinders if the protective door is left open. May also describe micro switches which are sometimes installed on room or compartment doors for the purpose of causing the door to be opened (for ventilation), before the compressor can be operated.
DOUBLE-ACTING PISTON: The double-acting piston is designed to compress the air in more than one stage at a time, either by “stacking” one cylinder or stage on top of another, or by compressing air in separate chambers on both the “up” and the “down” stroke. Thus, one connecting rod is used to compress air in two chambers. It is more difficult to carry away the added heat that this method produces.
DRAIN CYCLE: Refers to the interval between the recommended manual draining of the separator chambers, or between the automatic drain system's activation. In general, it is suggested that the drain cycle interval be shortened, somewhat, under unusually high ambient humidity conditions.
EFFICIENCY, VOLUMETRIC: Ratio of actual capacity (output) to the piston displacement, stated as a percentage. In high pressure multi-stage compressors, one design may have an efficiency rate of only around 60%, while another may achieve 75%, or more.
EXTENDED WARRANTY: A contract with the supplier in which the original factory warranty is extended, for an annual fee. With the extended warranty, some suppliers also include routine scheduled on-site maintenance service calls, and perform any needed interim service on-site, at the compressor's location. Others may provide no field service at all, and perform any needed warranty work in their own shop, or at the factory, with the owner paying for the transportation to the shop. Most extended warranties provided by compressor suppliers do not cover electric motors or fueled engines.
GLOSSARY
www.Lawrence-Factor.com 05/2015 - Page 141
FABRICATOR: Commonly used to describe a manufacturer who utilizes various other brands of “off-the-shelf” components to construct a finished assembly, usually sold under the fabricator's own brand name. Oddly, this same description is also used to describe an O.E.M. (Original Equipment Manufacturer.)
FAD, (FREE AIR DELIVERY): See ACFM
FILL HOSE: This usually describes the flexible line which is connected to the valve of the small cylinder for refilling. The fill hose should be as short as is practical, to minimize the effects of “whipping”, should the hose ever rupture. It should be replaced whenever any signs of wear become apparent.
FILL RATE: Refers to the time required to refill a cylinder. Sometimes stated in terms of cfm, but if only one size of smaller bottles is usually being refilled, the fill rate is often spoken of in terms of minutes required to fill a cylinder of that size.
For example; an empty “30-minute” SCBA cylinder refilled in less than about four minutes, will have enough of a temperature rise that it will only contain 80-85% of its intended capacity when it cools back down to room temperature. To provide the next user with its intended duration, it will then have to be “topped-off” after it cools down (be re-connected to the air system to bring the pressure back up to the cylinder's working pressure.)
In some situations, taking four minutes to refill each small cylinder will seem time-consuming. In this case, if a means is available to connect and fill two cylinders at once, the recommended rate of four minutes will hold the temperatures down, but still result in an AVERAGE fill time of two minutes per cylinder. If the air source is adequate, even more cylinders can be refilled simultaneously, even further reducing the average fill time.
FILL STATION: Technically, the fill station is the protective device into which small cylinders are placed for the refilling process. However, the entire breathing air production system is also still sometimes referred to as a “fill station”.
FILTERS: Today, this usually refers to the pre-inlet devices that separate and remove dust and dirt before it enters the first stage of the compressor. In the past, the media through which the compressed air was flowed after compression was also known as a filter system, but modern systems which better improve the quality of the air are known as purification systems.
FLOATING PISTON: Used in the final stage of certain compressors, the floating piston is not secured to the connecting rod, but is moved with a non-compressing “push piston” that is so attached. Once this stage is pressurized by the intermediate pressure being supplied by the previous stage, the floating piston is held in contact with the push piston on the down stroke. By design, the floating piston can be ringless. Its seal on the cylinder walls is made with a thin film of oil between the two precision-machined surfaces. This creates less heat, less friction, better compression, and longer service life. It also tends to require less start-up torque.
FLOW METER: A device, usually hand-held, with which the CFM flow of air can be measured. Flow meters are available in a number of cfm ranges, typically 0-15 cfm, 0-30 cfm, etc. (The narrower the range, the more accurately they can be read.) While in-line flow meters for permanent installation are available, they are cost-prohibitive for pressures above 1000 psi. The flow meter is one of the primary diagnostic tools used by the compressor technician.
FLOW RESTRICTOR: To avoid harmful high-velocity air flows, or to limit the fill rate of small cylinders to a rate which will not create too much heat, the concept of a flow restrictor at first seems like good logic. Flow restrictors are available, and all operate on the principle of creating a restricted orifice through which only a limited amount of air can flow.
However, in the act of refilling small cylinders, we are dealing with ever-increasing pressures on the downstream side of the restrictor valve, as the small cylinder progresses from empty to full. A restricted orifice will allow more air to pass through it when the pressure differential is the greatest. An orifice about the size of the period at the end of this sentence, for example, might allow an air flow of 10 cfm, when the upstream pressure is 5000 psi, and the downstream pressure is zero. However, when the downstream pressure climbs to 2500 psi, the flow would only be about 5 cfm. When the back-pressure reaches around 4000 psi, the flow would be even further reduced.
The end result, using a fixed orifice, is that we would have a too-high air flow at the start of a refill, and such a small trickle of air as the refill neared completion that it would take 15-20 minutes to finish. While fixed orifice flow restrictors are useful for certain applications, they work poorly (or too well) for slowing down the refill procedure. Perhaps an “automatically variable orifice” flow restrictor will someday be developed.
FLUIDICS: The general subject of instruments and controls that are dependent upon low rate air flow of air or gas at low pressure as the operating medium.
FREE AIR: Free air is defined as air at atmospheric conditions at any specific location; also often referred to ambient air.
GAS: From a physics point of view, the form of air is that of a gas, as one of the three basic phases of matter. However, in pneumatics, a special meaning is assigned to air, and the term gas refers to any gas other than air. Air is actually composed of a number of gases, most notably Oxygen (19-23%), and Nitrogen (77-81%).
GAUGE: The device by which pressure is indicated. In general, pressure gauges should not be used for pressures greater than approximately 75% of their maximum face pressure. It is generally recommended that one should face the gauge away from himself when it is pressurized.
GAUGE PRESSURE: (See ABSOLUTE PRESSURE).
HEAD: In compressor terminology, especially in lower-pressure compressors, the assembled compressor unit is known as the head. With high pressure units, the assembly is more often referred to as the block. See CYLINDER HEAD for more common usage.
HEAT, HIGH TEMPERATURES: Unduly high temperatures are probably the single most destructive element regarding compressor service life and air quality. The air compressor used for the production of breathing air must be designed for the coolest operation possible, and the installation of the air system must provide for an adequate and unrestricted flow of cooling air. The compressor and all of its cooling coils must be kept free of dirt
accumulation at all times.
HIGH PRESSURE: Always a relative term, with no fixed description. For example, one might own some cylinders rated for 2400 psi, and some rated for 4500 psi, and speak of them as “low pressure” and “high pressure”. A compressor manufacturer might make “low pressure” compressors which produce 100-150 psi, and “high pressure” compressors rated to 6000 psi. A plumber might consider 300 psi fittings to be “high pressure”, and anything lower than that to be “low pressure”. In other words, never accept anyone else's terminology of either description.
HORSEPOWER, BRAKE: This is the horsepower input to the compressor shaft, or more generally, to any driven machine shaft.
HOUR METER: As used in breathing air compressor applications, the hour meter is usually of the “accumulative, non-resettable” type. That is, like an automobile odometer, the hour meter will always show the total number of operating hours on the compressor. Hour meters are available in any voltage or even in a “vibration” mode for engine-powered units with no electrical system. (Vibration-type hour meters, however, when mounted on a compressor system installed in a vehicle, sometimes log the vehicle's operation, even when the compressor is not operating.) For proper maintenance, of both the compressor and the purification system, ALL compressors used in our applications should be equipped with recording hour meters.
HUMIDITY, SPECIFIC: Specific humidity is the weight of water vapor in an air vapor mixture per pound of dry air.
HUMIDITY, RELATIVE: The relative humidity of an air mixture is the ratio of the partial pressure of the vapor to the vapor saturation pressure at the dry bulb temperature of the mixture.
HYDROSTATIC TEST: The means of measuring the elasticity of a high pressure cylinder. This is done by pressurizing the cylinder to a prescribed pressure higher than its working pressure, and measuring the temporary expansion of its dimensions, and the permanent expansion, if any, that remains when it is de-pressurized.
INTERCOOLERS: These are heat exchangers used for removing some of the heat of compression from the air between the stages of a compressor. These also serve to help remove a considerable amount of moisture, as well. In an air-cooled compressor, the intercoolers are usually seen in the form of lengths of finned tubing positioned in the flow of cooling air.
LOW PRESSURE: (See HIGH PRESSURE)
MAINTENANCE CONTRACT: An arrangement in which the supplier's technician, on a prescribed schedule, visits the air system to perform operational checks and routine maintenance, leaving a copy of his checklist for the owner's records. If such contracts are available from different sources, they may have different inclusions and exclusions, and the compressor owner will do well to have a complete understanding of the terms. Typically, the Maintenance Contract does not include the cost of any needed emergency service calls that come up between scheduled visits.
MAINTENANCE COORDINATOR: This is the individual assigned to be responsible for the air system's maintenance, and the permanent recording of all maintenance procedures performed. In some cases, he may also serve as the Operations Coordinator.
MAINTENANCE PROCEDURES: Usually drafted by the Maintenance Coordinator, in conjunction with the supplier and the equipment manuals, this is a printed schedule of the routine maintenance to be performed on the air system. Often in the form of a working chart, on which all routine service intervals are listed, then logged on completion.
MAINTENANCE TIMER: A resettable timer clock, which provides a visual or audible alarm, or a compressor shut-down, after a pre-determined number of hours or minutes. The concept is that the operator will therefore be reminded that a certain maintenance procedure is due. However, since various maintenance procedures are performed at different intervals, a single maintenance timer serves only to call attention to one operation.
MOBILE AIR SYSTEM: Generally describes an air refill system, or air-line respirator system, which is transported to the scene-of-the-need for operation. While the mobile air system can include a compressor, the recent trend is more towards the transportation of a quantity of stored air which has been processed by a stationary compressor located away from the scene-of-the-need.
MODULAR AIR SYSTEM: (See UNITIZED air system)
MOISTURE INDICATOR: (See CARBON MONOXIDE MONITOR) In-line color-change moisture indicators are also available, but are incapable of drawing attention to an alarm situation.
MOISTURE MONITORS: These are electronic devices which, by means of an electronic sensor, or humidistat, are capable of alarming the operator when a pre-set moisture level is exceeded. Those which function with a sensing of the relative humidity are considered somewhat inaccurate, but can usually sense a gross moisture condition. (See CARTRIDGE-IMBEDDED SENSOR SYSTEMS)
MOLECULAR SIEVE: A media commonly used in modern purification cartridges, primarily as a desiccant (drying agent).
MUFFLER, SILENCER: For fueled engines, this is the device used to silence the exhaust. On compressors, it refers to the device, usually resembling a filter element that is in place to muffle the sound of the exhausting of the automatic condensate drain system.
MULTI-STAGE COMPRESSORS: These are compressors employing two or more stages.
MURPHY'S LAW: Yes, it's in the dictionary, and it belongs here. It is the principle that whatever can go wrong will (and usually at exactly the worst possible time). This is the rule that causes the electrical power to fail just when the air system operator has a stack of empty cylinders that need refilled quickly. It is the recognition of Murphy's Law that makes it practical, in this example, for emergency personnel to have an ample air storage system fully pressurized.
NEEDLE VALVE: A line valve in which the flow of the media is metered by the controlled insertion of a tapered shaft through an orifice of fixed size. When used for complete shut-off, the tapered shaft completely closes off the orifice, creating a metal-to-metal seal. With most such designs, it is
GLOSSARY
Page 142 - 05/2015 Products That Purify High PSI Air & Gas
FABRICATOR: Commonly used to describe a manufacturer who utilizes various other brands of “off-the-shelf” components to construct a finished assembly, usually sold under the fabricator's own brand name. Oddly, this same description is also used to describe an O.E.M. (Original Equipment Manufacturer.)
FAD, (FREE AIR DELIVERY): See ACFM
FILL HOSE: This usually describes the flexible line which is connected to the valve of the small cylinder for refilling. The fill hose should be as short as is practical, to minimize the effects of “whipping”, should the hose ever rupture. It should be replaced whenever any signs of wear become apparent.
FILL RATE: Refers to the time required to refill a cylinder. Sometimes stated in terms of cfm, but if only one size of smaller bottles is usually being refilled, the fill rate is often spoken of in terms of minutes required to fill a cylinder of that size.
For example; an empty “30-minute” SCBA cylinder refilled in less than about four minutes, will have enough of a temperature rise that it will only contain 80-85% of its intended capacity when it cools back down to room temperature. To provide the next user with its intended duration, it will then have to be “topped-off” after it cools down (be re-connected to the air system to bring the pressure back up to the cylinder's working pressure.)
In some situations, taking four minutes to refill each small cylinder will seem time-consuming. In this case, if a means is available to connect and fill two cylinders at once, the recommended rate of four minutes will hold the temperatures down, but still result in an AVERAGE fill time of two minutes per cylinder. If the air source is adequate, even more cylinders can be refilled simultaneously, even further reducing the average fill time.
FILL STATION: Technically, the fill station is the protective device into which small cylinders are placed for the refilling process. However, the entire breathing air production system is also still sometimes referred to as a “fill station”.
FILTERS: Today, this usually refers to the pre-inlet devices that separate and remove dust and dirt before it enters the first stage of the compressor. In the past, the media through which the compressed air was flowed after compression was also known as a filter system, but modern systems which better improve the quality of the air are known as purification systems.
FLOATING PISTON: Used in the final stage of certain compressors, the floating piston is not secured to the connecting rod, but is moved with a non-compressing “push piston” that is so attached. Once this stage is pressurized by the intermediate pressure being supplied by the previous stage, the floating piston is held in contact with the push piston on the down stroke. By design, the floating piston can be ringless. Its seal on the cylinder walls is made with a thin film of oil between the two precision-machined surfaces. This creates less heat, less friction, better compression, and longer service life. It also tends to require less start-up torque.
FLOW METER: A device, usually hand-held, with which the CFM flow of air can be measured. Flow meters are available in a number of cfm ranges, typically 0-15 cfm, 0-30 cfm, etc. (The narrower the range, the more accurately they can be read.) While in-line flow meters for permanent installation are available, they are cost-prohibitive for pressures above 1000 psi. The flow meter is one of the primary diagnostic tools used by the compressor technician.
FLOW RESTRICTOR: To avoid harmful high-velocity air flows, or to limit the fill rate of small cylinders to a rate which will not create too much heat, the concept of a flow restrictor at first seems like good logic. Flow restrictors are available, and all operate on the principle of creating a restricted orifice through which only a limited amount of air can flow.
However, in the act of refilling small cylinders, we are dealing with ever-increasing pressures on the downstream side of the restrictor valve, as the small cylinder progresses from empty to full. A restricted orifice will allow more air to pass through it when the pressure differential is the greatest. An orifice about the size of the period at the end of this sentence, for example, might allow an air flow of 10 cfm, when the upstream pressure is 5000 psi, and the downstream pressure is zero. However, when the downstream pressure climbs to 2500 psi, the flow would only be about 5 cfm. When the back-pressure reaches around 4000 psi, the flow would be even further reduced.
The end result, using a fixed orifice, is that we would have a too-high air flow at the start of a refill, and such a small trickle of air as the refill neared completion that it would take 15-20 minutes to finish. While fixed orifice flow restrictors are useful for certain applications, they work poorly (or too well) for slowing down the refill procedure. Perhaps an “automatically variable orifice” flow restrictor will someday be developed.
FLUIDICS: The general subject of instruments and controls that are dependent upon low rate air flow of air or gas at low pressure as the operating medium.
FREE AIR: Free air is defined as air at atmospheric conditions at any specific location; also often referred to ambient air.
GAS: From a physics point of view, the form of air is that of a gas, as one of the three basic phases of matter. However, in pneumatics, a special meaning is assigned to air, and the term gas refers to any gas other than air. Air is actually composed of a number of gases, most notably Oxygen (19-23%), and Nitrogen (77-81%).
GAUGE: The device by which pressure is indicated. In general, pressure gauges should not be used for pressures greater than approximately 75% of their maximum face pressure. It is generally recommended that one should face the gauge away from himself when it is pressurized.
GAUGE PRESSURE: (See ABSOLUTE PRESSURE).
HEAD: In compressor terminology, especially in lower-pressure compressors, the assembled compressor unit is known as the head. With high pressure units, the assembly is more often referred to as the block. See CYLINDER HEAD for more common usage.
HEAT, HIGH TEMPERATURES: Unduly high temperatures are probably the single most destructive element regarding compressor service life and air quality. The air compressor used for the production of breathing air must be designed for the coolest operation possible, and the installation of the air system must provide for an adequate and unrestricted flow of cooling air. The compressor and all of its cooling coils must be kept free of dirt
accumulation at all times.
HIGH PRESSURE: Always a relative term, with no fixed description. For example, one might own some cylinders rated for 2400 psi, and some rated for 4500 psi, and speak of them as “low pressure” and “high pressure”. A compressor manufacturer might make “low pressure” compressors which produce 100-150 psi, and “high pressure” compressors rated to 6000 psi. A plumber might consider 300 psi fittings to be “high pressure”, and anything lower than that to be “low pressure”. In other words, never accept anyone else's terminology of either description.
HORSEPOWER, BRAKE: This is the horsepower input to the compressor shaft, or more generally, to any driven machine shaft.
HOUR METER: As used in breathing air compressor applications, the hour meter is usually of the “accumulative, non-resettable” type. That is, like an automobile odometer, the hour meter will always show the total number of operating hours on the compressor. Hour meters are available in any voltage or even in a “vibration” mode for engine-powered units with no electrical system. (Vibration-type hour meters, however, when mounted on a compressor system installed in a vehicle, sometimes log the vehicle's operation, even when the compressor is not operating.) For proper maintenance, of both the compressor and the purification system, ALL compressors used in our applications should be equipped with recording hour meters.
HUMIDITY, SPECIFIC: Specific humidity is the weight of water vapor in an air vapor mixture per pound of dry air.
HUMIDITY, RELATIVE: The relative humidity of an air mixture is the ratio of the partial pressure of the vapor to the vapor saturation pressure at the dry bulb temperature of the mixture.
HYDROSTATIC TEST: The means of measuring the elasticity of a high pressure cylinder. This is done by pressurizing the cylinder to a prescribed pressure higher than its working pressure, and measuring the temporary expansion of its dimensions, and the permanent expansion, if any, that remains when it is de-pressurized.
INTERCOOLERS: These are heat exchangers used for removing some of the heat of compression from the air between the stages of a compressor. These also serve to help remove a considerable amount of moisture, as well. In an air-cooled compressor, the intercoolers are usually seen in the form of lengths of finned tubing positioned in the flow of cooling air.
LOW PRESSURE: (See HIGH PRESSURE)
MAINTENANCE CONTRACT: An arrangement in which the supplier's technician, on a prescribed schedule, visits the air system to perform operational checks and routine maintenance, leaving a copy of his checklist for the owner's records. If such contracts are available from different sources, they may have different inclusions and exclusions, and the compressor owner will do well to have a complete understanding of the terms. Typically, the Maintenance Contract does not include the cost of any needed emergency service calls that come up between scheduled visits.
MAINTENANCE COORDINATOR: This is the individual assigned to be responsible for the air system's maintenance, and the permanent recording of all maintenance procedures performed. In some cases, he may also serve as the Operations Coordinator.
MAINTENANCE PROCEDURES: Usually drafted by the Maintenance Coordinator, in conjunction with the supplier and the equipment manuals, this is a printed schedule of the routine maintenance to be performed on the air system. Often in the form of a working chart, on which all routine service intervals are listed, then logged on completion.
MAINTENANCE TIMER: A resettable timer clock, which provides a visual or audible alarm, or a compressor shut-down, after a pre-determined number of hours or minutes. The concept is that the operator will therefore be reminded that a certain maintenance procedure is due. However, since various maintenance procedures are performed at different intervals, a single maintenance timer serves only to call attention to one operation.
MOBILE AIR SYSTEM: Generally describes an air refill system, or air-line respirator system, which is transported to the scene-of-the-need for operation. While the mobile air system can include a compressor, the recent trend is more towards the transportation of a quantity of stored air which has been processed by a stationary compressor located away from the scene-of-the-need.
MODULAR AIR SYSTEM: (See UNITIZED air system)
MOISTURE INDICATOR: (See CARBON MONOXIDE MONITOR) In-line color-change moisture indicators are also available, but are incapable of drawing attention to an alarm situation.
MOISTURE MONITORS: These are electronic devices which, by means of an electronic sensor, or humidistat, are capable of alarming the operator when a pre-set moisture level is exceeded. Those which function with a sensing of the relative humidity are considered somewhat inaccurate, but can usually sense a gross moisture condition. (See CARTRIDGE-IMBEDDED SENSOR SYSTEMS)
MOLECULAR SIEVE: A media commonly used in modern purification cartridges, primarily as a desiccant (drying agent).
MUFFLER, SILENCER: For fueled engines, this is the device used to silence the exhaust. On compressors, it refers to the device, usually resembling a filter element that is in place to muffle the sound of the exhausting of the automatic condensate drain system.
MULTI-STAGE COMPRESSORS: These are compressors employing two or more stages.
MURPHY'S LAW: Yes, it's in the dictionary, and it belongs here. It is the principle that whatever can go wrong will (and usually at exactly the worst possible time). This is the rule that causes the electrical power to fail just when the air system operator has a stack of empty cylinders that need refilled quickly. It is the recognition of Murphy's Law that makes it practical, in this example, for emergency personnel to have an ample air storage system fully pressurized.
NEEDLE VALVE: A line valve in which the flow of the media is metered by the controlled insertion of a tapered shaft through an orifice of fixed size. When used for complete shut-off, the tapered shaft completely closes off the orifice, creating a metal-to-metal seal. With most such designs, it is
GLOSSARY
www.Lawrence-Factor.com 05/2015 - Page 143
difficult to attain a bubble-tight shut-off of high pressure air, so this is not a popular design for most air system applications.
ON-SITE START-UP: With the installation of a new air system, the buyer should insist that the supplier provide the services of a factory-certified delivery technician. The technician shall make a post-delivery integrity check of the entire system, check for correct installation and wiring, calibrate the system to the buyer's exact application needs, perform a thorough operational check of the entire system, and train the personnel who will be operating and maintaining the system. The buyer should beware of sellers who promise an “on-site start-up”, but are actually capable of little more than having a representative present at the time the system is turned on.
OPERATIONS COORDINATOR: The person assigned to develop the operating procedures for the air system. The drafting of these procedures is often done in consultation with the supplier, and the Maintenance Coordinator. The Operations Coordinator is responsible for seeing that the system is operated in accordance with these procedures. If other personnel are to be involved in the operation of the system, the coordinator is responsible for training these people and enforcing the correct procedures. In some cases, the Operations Coordinator may also serve as the Maintenance Coordinator.
OPERATING PROCEDURES: A written set of instructions for the correct and safe operation of the system. Usually separate from the MAINTENANCE PROCEDURES. All personnel who are authorized to operate the system are to be made thoroughly familiar with these procedures, and the key features of the procedures are to be prominently displayed in the vicinity of the air system. Since air systems are comprised of several components, and since applications can vary, the Operating Procedures must be exactly tailored to the individual system and the applications.
OXIDATION: The process or state of undergoing combination with Oxygen. In our applications, this usually translates to rust or corrosion.
OXYGEN CLEAN: Applies to fittings, hoses, regulators, etc. that are intended for use with pure Oxygen. For this application, all equipment must be chemically cleaned to remove all traces of any type of oil or oil residue. Such equipment, when new, is usually individually packaged, and labeled OXYGEN CLEAN.
PHASING: Electric-driven compressors will be equipped with either a single-phase motor, or three-phase. The electrical supply must match the type of motor. Some older three-phase supplies involve one phase (wire), which is of higher voltage than the other two. This is known as the “wild leg”, and must be connected to the proper terminal in the compressor's electrical enclosure, as per the manufacturer's instructions. Motor rotation of a three-phase motor can be reversed by switching any two of the three power leads. Thus, rotation of the motor must be checked upon installation, and any time thereafter when any wiring changes are made in the building. Though most compressors will pump air and seem to be functioning when the motor rotation is incorrect, damage and high operating temperatures will soon occur.
PIGTAIL: The most common use of this term, in our applications, is to describe the connections between the cylinders in a multi-cylinder air storage system. Usually “looped”, to provide some protection against vibration or movement of the cylinders, the pigtail may be made of hose or of tubing.
POD: This generally refers to a cluster of storage vessels contained in a mounting rack which can be lifted (with a crane or fork-lift), and transported as a single unit.
PLUG VALVE: In the field of high pressure air control it describes a valve design which incorporates a fixed orifice, and onto this a seal element is forced by a clock-wise torque of a threaded stem, for shut-off. A complete bubble-tight shut-off is easily achieved. The seal element most used is of dense nylon, or similar.
When the valve handle is turned counter-clockwise, the seal element is lifted from the orifice in tiny increments, and a metered air flow is readily controllable. In most designs, the usual air flow is intended to be through the orifice TOWARD the seal element. Virtually all cylinder valves are of this design, as are the majority of line valves and control panel valves in use. This is also known as the globe style.
PPM: Parts Per Million.
PRESSURE, DISCHARGE: Discharge pressure is the absolute total pressure at the discharge outlet of a compressor. Compressors are rated at a maximum design discharge pressure, and should not be operated at pressures greater than that, even if they are mechanically capable of generating higher pressures.
PRESSURE LUBRICATION: A feature in which oil pressure from an oil pump is directed to the internal points of the compressor which require absolute lubrication. Typically, in a high pressure compressor, the working oil pressure may be 800-1200 psi. Pressure lubrication is often combined with “splash” and “mist” lubrication for various other points within the crankcase. Without pressure lubrication, though, it is difficult for the lubricant to travel into the upper cylinder wall area of the high pressure stages.
PSI (Pounds Per Square Inch): The amount of pressure exerted on one square inch of surface; often stated as PSIA, or PSIG, signifying ABSOLUTE or GAUGE pressure.
PURGE VALVE: (See BLEEDER VALVE)
PURIFICATION SYSTEM: This is a chamber or series of chambers, in which various media are packed (usually in disposable cartridges), through which the compressed air flows after it has passed through the final moisture separator. On most models of newer compressors, the purification system is mounted directly on the chassis with the compressor. Unlike earlier “filter” systems, which removed only certain contaminants, the modern purification system actually improves the quality of the air by changing some of its constituents (mainly, Carbon Monoxide molecules are converted to Carbon Dioxide molecules, by catalytic conversion.) On a stand-alone purification system, as for retrofit with an older compressor, a final separator chamber is also usually included.
QUARTER-TURN VALVE: A line valve that is FULLY-OPEN, or FULLY-CLOSED, with only a 90° rotation. This is an appealing concept, since such valves can quickly be seen to be open or closed. However, most quarter-turn valves do not lend themselves well to the act of metering the flow of air, which is a very common need in handling high pressure air. In fact, most quarter-turn valves will perform poorly when used for metering air flow, and will often fail prematurely. The quarter-turn valve should be used generally in an application where the air flow is to be only 100% ON or 100% OFF; also known as the ball valve.
RADIAL BLOCK: This term has to do with the positioning of the compression cylinders on the compressor's crankcase. In the radial design 4-stage unit, the stages are lined up 90° from each other. As a piston is on its up-stroke in one cylinder, it is one the down-stroke in the cylinder exactly opposite. The radial configuration tends to provide better balance of the moving parts, and is more effectively cooled.
RECEIVERS: Tanks or vessels used for the storage of air discharged from compressors. They also serve to dampen discharge line pulsations.
RECIPROCATING COMPRESSORS: The reciprocating compressor's element is a piston, or pistons, having a reciprocating motion inside a cylinder (as opposed to rotary or screw-type compressors, which are seldom used in high pressure breathing air applications).
REGULATOR: Usually adjustable, the regulator reduces a higher pressure to a lower pressure. Most regulators incorporate an IN pressure gauge (indicating the supply pressure), and an OUT pressure gauge (indicating the adjusted/regulated pressure).
All regulators are designed for a certain MAXIMUM inlet pressure, and a certain range of adjustable outlet pressure. Simply substituting higher or lower pressure gauges in the regulator will not change its performance characteristics or design safety!
In general, the higher the inlet pressure rating of the regulator, the higher its cost. FIXED RATIO non-adjustable regulators are also available, for certain applications. These reduce the supply pressure to a certain percentage; regulated pressure therefore varies with the supply pressure.
REMOTE INTAKE: This refers to the extension of the compressor's intake port to another area. Before modern purification systems were developed, this practice was rather common, by running the extension to outside of the building.
Today, the concept is that the compressor should not be installed in a location in which the quality of the ambient air would be hazardous to the health of the operator. If the ambient air at the compressor's location is good enough for the operator to breathe safely, then the compressor's purification system can readily improve this to Grade “E” air.
When unusual circumstances dictate the need for a remote intake, the compressor manufacturer's literature should be consulted for the appropriate dimensions of the extension. An extension of the wrong design or dimensions can very easily “throttle” the intake air, and cause reduced output and high operating temperatures.
SAFETY RELIEF VALVE: This describes a spring loaded valve which is normally in the CLOSED position, and which releases air when the upstream pressure is greater than the pre-selected relief pressure. Most such valves will re-close, when the upstream pressure is reduced. Safety valves are available in a wide range of pressure ratings, are usually adjustable for the exact desired relief pressure within that range, and should never be used to control a pressure other than the prescribed range.
A second factor pertaining to safety valves is the rated flow rate of the valve, meaning the maximum amount of air that can flow through the valve, at its rated pressure. For example, a safety valve that could only flow a maximum of 15 cfm, when opened, would be absolutely inappropriate for use in conjunction with a 20 cfm compressor! One-time BURST DISCS, which are used with cylinder valves and certain other applications, are sometimes referred to as safety valves, but they technically are not.
SCBA: An acronym for Self-Contained Breathing Apparatus. Usually descriptive of the unit consisting of the high pressure cylinder, the regulator(s), the connecting hoses, the wearer's face mask assembly, and the harness used to don the apparatus. SCBA units are to NEVER be used as SCUBA (underwater).
SCUBA: An acronym for Self-Contained Underwater Breathing Apparatus. SCUBA usually describes the high pressure cylinder, the diver's regulator and mouthpiece, and the back-pack or assembly used for attaching the unit to the diver.
SEPARATOR: Also known as a condensate trap. A chamber in which moisture is removed from the air, by impingement, coalescence, expansion, temperature change, or any of a number of other mechanical means. In the typical high pressure compressor used for breathing air applications, separator chambers are usually used between each of the stages of compression, and another final separator is used just prior to the air's entry into the purification system. All separator collection chambers must be emptied of their accumulated moisture regularly, without fail!
SERVICE CONTRACT: Unlike the less expensive Maintenance Contract, the service contract includes the cost of any and all needed emergency service calls. Most suppliers incorporate regularly scheduled routine maintenance visits as part of the service contract.
SINGLE-ACTING PISTON: The single-acting piston compresses air only in one chamber, on only one stroke (usually the “up” stroke). A double-acting piston, on the other hand, compresses air in more than one chamber (as in stacked cylinders), some on the same stroke, and some on both the up and down stroke. The single-acting piston tends to create less heat, but does require a separate connecting rod for each stage of compression.
SOLENOID VALVE: A valve, of any pressure, activated by an electrical surge from a remote source. Most automatic condensate drain systems incorporate one or more solenoid valves; can be thought of as serving the same purpose as a relay in an electrical circuit.
SPECIFIC GRAVITY: This property is the ratio of the specific weight of a gas to that of dry air at the same pressure and gravity. The specific gravity of dry air is 1.0, or the “benchmark” for the other gases. The specific gravity of some other gases are: Oxygen 1.105; Nitrogen .9672; Carbon Dioxide 1.529; Carbon Monoxide .9762; Helium .1381.
SPEED: (or RPM). The speed of a compressor refers to the revolutions per minute of the compressor shaft.
SPLASH LUBRICATION: A method of lubrication in which moving parts “dip” into the reservoir of oil in the crankcase, causing droplets to be thrown around the interior of the crankcase.
STACKED CYLINDERS OR STACKED STAGES: In this design, unlike the “radial” block design, one cylinder/stage is located on top of another, both compressed with one piston, and one connecting rod. While less costly than providing a separate rod and piston for each stage of compression, this design tends to make it difficult to carry away the heat of compression as efficiently.
GLOSSARY
Page 144 - 05/2015 Products That Purify High PSI Air & Gas
difficult to attain a bubble-tight shut-off of high pressure air, so this is not a popular design for most air system applications.
ON-SITE START-UP: With the installation of a new air system, the buyer should insist that the supplier provide the services of a factory-certified delivery technician. The technician shall make a post-delivery integrity check of the entire system, check for correct installation and wiring, calibrate the system to the buyer's exact application needs, perform a thorough operational check of the entire system, and train the personnel who will be operating and maintaining the system. The buyer should beware of sellers who promise an “on-site start-up”, but are actually capable of little more than having a representative present at the time the system is turned on.
OPERATIONS COORDINATOR: The person assigned to develop the operating procedures for the air system. The drafting of these procedures is often done in consultation with the supplier, and the Maintenance Coordinator. The Operations Coordinator is responsible for seeing that the system is operated in accordance with these procedures. If other personnel are to be involved in the operation of the system, the coordinator is responsible for training these people and enforcing the correct procedures. In some cases, the Operations Coordinator may also serve as the Maintenance Coordinator.
OPERATING PROCEDURES: A written set of instructions for the correct and safe operation of the system. Usually separate from the MAINTENANCE PROCEDURES. All personnel who are authorized to operate the system are to be made thoroughly familiar with these procedures, and the key features of the procedures are to be prominently displayed in the vicinity of the air system. Since air systems are comprised of several components, and since applications can vary, the Operating Procedures must be exactly tailored to the individual system and the applications.
OXIDATION: The process or state of undergoing combination with Oxygen. In our applications, this usually translates to rust or corrosion.
OXYGEN CLEAN: Applies to fittings, hoses, regulators, etc. that are intended for use with pure Oxygen. For this application, all equipment must be chemically cleaned to remove all traces of any type of oil or oil residue. Such equipment, when new, is usually individually packaged, and labeled OXYGEN CLEAN.
PHASING: Electric-driven compressors will be equipped with either a single-phase motor, or three-phase. The electrical supply must match the type of motor. Some older three-phase supplies involve one phase (wire), which is of higher voltage than the other two. This is known as the “wild leg”, and must be connected to the proper terminal in the compressor's electrical enclosure, as per the manufacturer's instructions. Motor rotation of a three-phase motor can be reversed by switching any two of the three power leads. Thus, rotation of the motor must be checked upon installation, and any time thereafter when any wiring changes are made in the building. Though most compressors will pump air and seem to be functioning when the motor rotation is incorrect, damage and high operating temperatures will soon occur.
PIGTAIL: The most common use of this term, in our applications, is to describe the connections between the cylinders in a multi-cylinder air storage system. Usually “looped”, to provide some protection against vibration or movement of the cylinders, the pigtail may be made of hose or of tubing.
POD: This generally refers to a cluster of storage vessels contained in a mounting rack which can be lifted (with a crane or fork-lift), and transported as a single unit.
PLUG VALVE: In the field of high pressure air control it describes a valve design which incorporates a fixed orifice, and onto this a seal element is forced by a clock-wise torque of a threaded stem, for shut-off. A complete bubble-tight shut-off is easily achieved. The seal element most used is of dense nylon, or similar.
When the valve handle is turned counter-clockwise, the seal element is lifted from the orifice in tiny increments, and a metered air flow is readily controllable. In most designs, the usual air flow is intended to be through the orifice TOWARD the seal element. Virtually all cylinder valves are of this design, as are the majority of line valves and control panel valves in use. This is also known as the globe style.
PPM: Parts Per Million.
PRESSURE, DISCHARGE: Discharge pressure is the absolute total pressure at the discharge outlet of a compressor. Compressors are rated at a maximum design discharge pressure, and should not be operated at pressures greater than that, even if they are mechanically capable of generating higher pressures.
PRESSURE LUBRICATION: A feature in which oil pressure from an oil pump is directed to the internal points of the compressor which require absolute lubrication. Typically, in a high pressure compressor, the working oil pressure may be 800-1200 psi. Pressure lubrication is often combined with “splash” and “mist” lubrication for various other points within the crankcase. Without pressure lubrication, though, it is difficult for the lubricant to travel into the upper cylinder wall area of the high pressure stages.
PSI (Pounds Per Square Inch): The amount of pressure exerted on one square inch of surface; often stated as PSIA, or PSIG, signifying ABSOLUTE or GAUGE pressure.
PURGE VALVE: (See BLEEDER VALVE)
PURIFICATION SYSTEM: This is a chamber or series of chambers, in which various media are packed (usually in disposable cartridges), through which the compressed air flows after it has passed through the final moisture separator. On most models of newer compressors, the purification system is mounted directly on the chassis with the compressor. Unlike earlier “filter” systems, which removed only certain contaminants, the modern purification system actually improves the quality of the air by changing some of its constituents (mainly, Carbon Monoxide molecules are converted to Carbon Dioxide molecules, by catalytic conversion.) On a stand-alone purification system, as for retrofit with an older compressor, a final separator chamber is also usually included.
QUARTER-TURN VALVE: A line valve that is FULLY-OPEN, or FULLY-CLOSED, with only a 90° rotation. This is an appealing concept, since such valves can quickly be seen to be open or closed. However, most quarter-turn valves do not lend themselves well to the act of metering the flow of air, which is a very common need in handling high pressure air. In fact, most quarter-turn valves will perform poorly when used for metering air flow, and will often fail prematurely. The quarter-turn valve should be used generally in an application where the air flow is to be only 100% ON or 100% OFF; also known as the ball valve.
RADIAL BLOCK: This term has to do with the positioning of the compression cylinders on the compressor's crankcase. In the radial design 4-stage unit, the stages are lined up 90° from each other. As a piston is on its up-stroke in one cylinder, it is one the down-stroke in the cylinder exactly opposite. The radial configuration tends to provide better balance of the moving parts, and is more effectively cooled.
RECEIVERS: Tanks or vessels used for the storage of air discharged from compressors. They also serve to dampen discharge line pulsations.
RECIPROCATING COMPRESSORS: The reciprocating compressor's element is a piston, or pistons, having a reciprocating motion inside a cylinder (as opposed to rotary or screw-type compressors, which are seldom used in high pressure breathing air applications).
REGULATOR: Usually adjustable, the regulator reduces a higher pressure to a lower pressure. Most regulators incorporate an IN pressure gauge (indicating the supply pressure), and an OUT pressure gauge (indicating the adjusted/regulated pressure).
All regulators are designed for a certain MAXIMUM inlet pressure, and a certain range of adjustable outlet pressure. Simply substituting higher or lower pressure gauges in the regulator will not change its performance characteristics or design safety!
In general, the higher the inlet pressure rating of the regulator, the higher its cost. FIXED RATIO non-adjustable regulators are also available, for certain applications. These reduce the supply pressure to a certain percentage; regulated pressure therefore varies with the supply pressure.
REMOTE INTAKE: This refers to the extension of the compressor's intake port to another area. Before modern purification systems were developed, this practice was rather common, by running the extension to outside of the building.
Today, the concept is that the compressor should not be installed in a location in which the quality of the ambient air would be hazardous to the health of the operator. If the ambient air at the compressor's location is good enough for the operator to breathe safely, then the compressor's purification system can readily improve this to Grade “E” air.
When unusual circumstances dictate the need for a remote intake, the compressor manufacturer's literature should be consulted for the appropriate dimensions of the extension. An extension of the wrong design or dimensions can very easily “throttle” the intake air, and cause reduced output and high operating temperatures.
SAFETY RELIEF VALVE: This describes a spring loaded valve which is normally in the CLOSED position, and which releases air when the upstream pressure is greater than the pre-selected relief pressure. Most such valves will re-close, when the upstream pressure is reduced. Safety valves are available in a wide range of pressure ratings, are usually adjustable for the exact desired relief pressure within that range, and should never be used to control a pressure other than the prescribed range.
A second factor pertaining to safety valves is the rated flow rate of the valve, meaning the maximum amount of air that can flow through the valve, at its rated pressure. For example, a safety valve that could only flow a maximum of 15 cfm, when opened, would be absolutely inappropriate for use in conjunction with a 20 cfm compressor! One-time BURST DISCS, which are used with cylinder valves and certain other applications, are sometimes referred to as safety valves, but they technically are not.
SCBA: An acronym for Self-Contained Breathing Apparatus. Usually descriptive of the unit consisting of the high pressure cylinder, the regulator(s), the connecting hoses, the wearer's face mask assembly, and the harness used to don the apparatus. SCBA units are to NEVER be used as SCUBA (underwater).
SCUBA: An acronym for Self-Contained Underwater Breathing Apparatus. SCUBA usually describes the high pressure cylinder, the diver's regulator and mouthpiece, and the back-pack or assembly used for attaching the unit to the diver.
SEPARATOR: Also known as a condensate trap. A chamber in which moisture is removed from the air, by impingement, coalescence, expansion, temperature change, or any of a number of other mechanical means. In the typical high pressure compressor used for breathing air applications, separator chambers are usually used between each of the stages of compression, and another final separator is used just prior to the air's entry into the purification system. All separator collection chambers must be emptied of their accumulated moisture regularly, without fail!
SERVICE CONTRACT: Unlike the less expensive Maintenance Contract, the service contract includes the cost of any and all needed emergency service calls. Most suppliers incorporate regularly scheduled routine maintenance visits as part of the service contract.
SINGLE-ACTING PISTON: The single-acting piston compresses air only in one chamber, on only one stroke (usually the “up” stroke). A double-acting piston, on the other hand, compresses air in more than one chamber (as in stacked cylinders), some on the same stroke, and some on both the up and down stroke. The single-acting piston tends to create less heat, but does require a separate connecting rod for each stage of compression.
SOLENOID VALVE: A valve, of any pressure, activated by an electrical surge from a remote source. Most automatic condensate drain systems incorporate one or more solenoid valves; can be thought of as serving the same purpose as a relay in an electrical circuit.
SPECIFIC GRAVITY: This property is the ratio of the specific weight of a gas to that of dry air at the same pressure and gravity. The specific gravity of dry air is 1.0, or the “benchmark” for the other gases. The specific gravity of some other gases are: Oxygen 1.105; Nitrogen .9672; Carbon Dioxide 1.529; Carbon Monoxide .9762; Helium .1381.
SPEED: (or RPM). The speed of a compressor refers to the revolutions per minute of the compressor shaft.
SPLASH LUBRICATION: A method of lubrication in which moving parts “dip” into the reservoir of oil in the crankcase, causing droplets to be thrown around the interior of the crankcase.
STACKED CYLINDERS OR STACKED STAGES: In this design, unlike the “radial” block design, one cylinder/stage is located on top of another, both compressed with one piston, and one connecting rod. While less costly than providing a separate rod and piston for each stage of compression, this design tends to make it difficult to carry away the heat of compression as efficiently.
GLOSSARY
www.Lawrence-Factor.com 05/2015 - Page 145
STAGES: Stages are the steps of compression of a gas. Each stage usually requires a separate cylinder, and the air is compressed by the stages in succession.
STANDARD AIR: Defined as air at a temperature of 68°F, a pressure of 14.7 psi, and a relative humidity of 36%.
SUPPLIER/SOURCE: Generally considered to be the party who is paid for the purchased equipment. A supplier may be the manufacturer of the equipment; a distributor serving as the manufacturer's service and distribution point; a dealer who represents either a manufacturer or a distributor; or a broker, who usually has no service capability. In general, the buyer will obtain the best long-term value by choosing a source capable of providing expert ready field service. Most manufacturers will not sell directly to end users because the factories are not well positioned to provide end user field service.
TEMPERATURE, DISCHARGE: This is the total temperature at the discharge outlet of the compressor. In our applications, this more often refers to the temperature of the air at the outlet of the aftercooler. Well designed compressors will usually affect an (aftercooler) discharge temperature of no more than 15-17° over the compressor's inlet (ambient) temperature.
TWO-WAY VALVE: This is a line valve which is used to send the air flow in one direction or another. As an example, a two-way valve on an air control panel might be used to send the air to a high pressure circuit, when in one position, or to a lower-pressure circuit when in the other position. Like quarter-turn valves, however, the two-way valve is not intended for the metering of the air flow. Three-way valves are also available.
UNITIZED AIR SYSTEM: Also sometimes referred to as the MODULAR air system. A relatively recent development, the unitized air system incorporates the compressor, the driver, the purification system, the air storage system, the air control panel, the electronic monitors, and the fill station all in one cabinet. Unitized systems tend to have a neat appearance, sometimes can cost slightly less than the components purchased separately, and, in some cases, require less total floor space for installation.
VALVES, HEAD: These valves, usually metal-to-metal, control the flow of air into and out of each of the compression cylinders of the compressor. Except for extremely large compressors, these valves are not mechanically opened and closed, but are simply spring-loaded “check valves”, in effect. The head valve is one of the more critical parts of the compressor, and, especially on the higher-pressure stages, must be made of extremely durable metals, and machined to exacting close tolerances. Over a span of operation, the high pressure compressor's head valves are likely to require the most service.
VALVES, CONTROL: Line-mounted or panel mounted, the control valve regulates the flow of air, and are usually manually operated by the system operator.
VALVES, SOLENOID: Solenoid valves are usually actuated by electrical pulse or pneumatic flow or pressure differentials, and are used to function controls such as the automatic condensate drain system, automatic storage system sequential refilling systems, and some of the other automated devices.
“VEE” BLOCK: This refers to the design of the placement of the compression cylinders on the compressor's crankcase. The VEE block, when viewed from the front or back, resembles the letter “V”. If the compressor is of 3 or 4 stages, one or more of the stages will be “stacked” on top of another.
WATER BATH: This usually refers to the practice of immersing the small cylinders to be refilled into a container of cool water, to limit the temperature rise that will result from the compressing of the air. This is not recommended for composite cylinders.
WORKING PRESSURE: According to the desired SAFETY RATIO, a product's design working pressure will be a fraction of the product's design burst pressure. Some products are marked with their working pressure, while others aren't. If in doubt about an unmarked product's intended working pressure, the manufacturer's charts must be consulted. Never pressure any component beyond its rated working pressure.
GLOSSARY
Page 146 - 05/2015 Products That Purify High PSI Air & Gas
Accessories
Service Kit for Bleed & Flow Valves
FITS OEM ITEM NO.
Lawrence Factor® RK-534140-SF
Service Kit for Cartridge Holders
FITS OEM ITEM NO.
17455/56 SK-222206-BC
AB230861 SK-272701-BC
Aero Dri® 5815 SK-444402-BC
Air Dry® SK-242403-BC
Alkin® 6702-19 SK-146702-BC
Alkin® 7047-13 SK-147047-BC
Allied Air® 2333 SK-101003-BC
Bauer® 61860 SK-220026-HS
Bauer® N04568 SK-222205-BC
Bauer® N4735 & N4736 SK-222203-BC
Eagle® 50-L310 SK-363601-BC
Fluid PAC2333 SK-353501-BC
Lawrence Factor® SK-535306-BB
Lawrence Factor® SK-535306-VT
Lawrence Factor® SK-535310-BB
Lawrence Factor® SK-535394-BB
Lawrence Factor® SK-600020-BB
Lawrence Factor® SK-650101-NS
Lawrence Factor® SK-650101-OS
LFI 30 Style Holder SK-303003-BC
Mako® M310 SK-656503-BC
Robbins Aviation® SK-727202-BC
Service Kit for Check Valves
FITS OEM ITEM NO.
Lawrence Factor® GK-530200-SF
Lawrence Factor® RK-530200-HS
Service Kit for Indicators
FITS OEM ITEM NO.
Lawrence Factor® EL-531926-RA
Lawrence Factor® GK-530023-SF
Mako® M7414 EL-652653-OO
NA EL-532453-RH
Service Kit for In-Line Filter Holders
FITS OEM ITEM NO.
Lawrence Factor® EL-534051-E
Lawrence Factor® EL-534051-G
Service Kit for Priority Valves
FITS OEM ITEM NO.
VL-530110-AF RK-530201-HS
VL-530141-TG RK-530210-HS
Service Kit for Relief Valves
FITS OEM ITEM NO.
VL-530111-AF RK-530202-HS
VL-530130-TH RK-530203-HS
VL-530131-TH RK-530204-HS
Compressor Parts
Fits Bauer Compressor®
FITS OEM ITEM NO.
000149 NP-2202-0014A
000240 NP-2202-0015A
000411 NP-2216-0619A
000411 NP-2216-1023A
001866 NP-2202-0011A
001867 NP-2202-0012A
002010 NP-2202-0016A
002622 NP-2207-0434AK
003039 NP-2202-0017A
003063 VL-530132-TH
003110 NP-2202-0010A
003177 NP-2202-0022A
003733 NP-2202-0136A
004375 NP-2210-0134A
004466 NP-2202-0018A
004479 NP-2202-0167A
004555 NP-2217-0009A
004675 NP-2202-0020A
005290 NP-2205-0970A
005298 NP-2202-0021A
005523 NP-2202-0023A
006192 NP-2202-0129A
007790 NP-2201-0001A
007862 NP-2202-0024A
008263 NP-2202-0330A
008264 NP-2202-0337A
009284 NP-2202-0351A
009285 NP-2202-1082A
009313 NP-2201-0883A
009884 NP-2201-0025A
010253 NP-2215-0367A
010254 NP-2215-0369A
010255 NP-2215-0381A
010528 NP-2221-0056A
010670 NP-2215-0209A
011523 VL-530132-TH
011612 NP-2210-0379A
011656 NP-2215-0210A
011665 NP-2201-0901A
012093 NP-2210-0378A
012094 NP-2210-0347A
012228 NP-2202-0119A
012386 NP-2202-0058A
012560 NP-2202-0462A
012784 NP-2212-0856A
012785 NP-2212-0857A
012835 NP-2201-0004A
012836 NP-2201-0005A
012840 NP-2201-0006A
012841 NP-2201-0007A
012885 NP-2215-0367A
012886 NP-2215-0368A
013283 NP-2212-0059A
013756 NP-2202-0140A
013757 NP-2202-0060A
013758 NP-2221-0563A
013822 NP-2201-0061A
013823 NP-2201-0036A
013853 NP-2202-0491AK
014000 NP-2206-0888A
014054 NP-2206-0893A
014056 NP-2206-0721A
014085 NP-2216-0182A
014086 NP-2216-0181A
014087 NP-2216-0064A
014089 NP-2216-0065A
014090 NP-2215-0367A
014101 NP-2206-0683A
014103 NP-2206-0684A
014117 NP-2216-0026A
014118 NP-2216-0027A
014121 NP-2201-0002A
014122 NP-2201-1000A
014123 NP-2216-0066A
014124 NP-2201-0028A
014125 NP-2216-0067A
014332 NP-2201-0068A
CROSS REFERENCE GUIDE
www.Lawrence-Factor.com 05/2015 - Page 147
014546-1 NP-2206-0887A
014546-2 NP-2206-0886A
014582 NP-2201-0030A
014583 NP-2201-0031A
014585 NP-2210-0348A
014609 NP-2210-0470A
014624 NP-2206-0674A
014625 NP-2206-0677A
014696 NP-2216-0069A
014742 NP-2210-0364A
014744 NP-2206-0669A
014745 NP-2206-0670A
014746 NP-2206-0671A
014901 NP-2206-0680A
014902 NP-2206-0681A
014929 NP-2216-0618A
055459 NP-2204-0361A
055459 NP-2204-0361AK
055460 NP-2204-0360A
055460 NP-2204-0360AK
055697 NP-2206-0675A
056183 NP-2201-0834A
056301 NP-2207-0149A
056302 NP-2207-0070A
056358 NP-2201-1003A
056359 NP-2201-0001A
056406 NP-2201-0032A
056407 NP-2201-0033A
056668 NP-2202-0497A
056687 NP-2222-0710A
056691 NP-2222-0711A
056716 NP-2206-0674A
056717 NP-2206-0677A
056983 NP-2202-0323A
057057 NP-2216-0071A
057058 NP-2216-0071A
057154 NP-2210-0518A
057254 NP-2216-0619A
057254 NP-2216-1023A
057628 NP-2222-0525A
057629 NP-2222-0526A
058119 NP-2207-0463A
058135 NP-2201-0034A
058136 NP-2201-0035A
058144 NP-2202-0175A
058232 NP-2201-0130A
058245 NP-2216-0143A
058249 NP-2206-0697A
058262 NP-2202-0037A
058300 NP-2202-0131A
058545 NP-2202-0038A
058855 NP-2201-0132A
058991 NP-2206-0677A
058992 NP-2206-0677A
059400 NP-2206-1018A
059410 NP-2215-0991A
059433 NP-2221-0215A
059449 NP-2201-0891A
059457 NP-2216-0884A
060417 NP-2222-0524A
060419 NP-2222-0712A
060456 NP-2206-1041A
060532 NP-2210-0835A
061024 NP-2202-0985A
061050 NP-2210-0835A
061114 NP-2215-0991A
061183 NP-2202-0454A
061362 NP-2216-0855A
061860 FC-220029-SB
062477 NP-2209-0566A
062487 NP-2210-0471A
062901 NP-2210-0567A
063340 NP-2202-0073A
063536 NP-2207-0885A
063760-KIT NP-2222-0588AK
063761-KIT NP-2222-0589AK
064003 NP-2222-0195A
064005 NP-2222-0207A
064357 NP-2206-0686A
064359 NP-2206-0687A
064363 NP-2206-0685A
064364 NP-2206-0688A
064365 NP-2206-0689A
064498 NP-2212-0074A
065410 VL-530132-TH
066934 NP-2210-0347A
067797 NP-2215-0991A
067979 NP-2202-0429A
068625 NP-2216-0182A
069791 NP-2216-0181A
069792 NP-2216-0182A
069793 NP-2216-0071A
069890 NP-2207-0885A
069892 NP-2206-0685A
069893 NP-2206-0688A
069894 NP-2206-0689A
069931 NP-2216-0892A
069938 NP-2206-1041A
069949 NP-2210-0562A
069950 NP-2210-0836A
069954 NP-2216-0176A
069955 NP-2216-0069A
069957 NP-2206-0681A
069959 NP-2206-0697A
069975 NP-2210-0379A
069977 NP-2216-0375A
069978 NP-2206-0675A
069988 NP-2206-0680A
070013 NP-2210-0134A
071064 NP-2205-0177A
071065 NP-2205-0108A
071065 NP-2205-0178A
072165 NP-2210-0378A
072176 NP-2210-0057A
072249 NP-2210-0471A
072439 NP-2207-0434AK
072774 NP-2206-0893A
072776 NP-2206-0721A
072935 NP-2215-0366A
073628 NP-2216-0071A
075310 NP-2210-0531A
077774 NP-2207-0507A
078043 NP-2210-0529A
078045 NP-2210-0528A
078334 NP-2210-0591A
078421 NP-2202-0428A
078706 NP-2215-0500A
081409 NP-2201-0516A
081801 NP-2215-0381A
081802 NP-2215-0209A
081807 NP-2215-0369A
081810 NP-2215-0367A
082048 NP-2217-0517A
12786 NP-2212-0858A
81804 NP-2215-1200A
ADP-0020 NP-2214-0515A
BET-0019 NP-2218-0998A
BET-0046 NP-2218-1001A
BET-0136 NP-2218-0101A
BET-0172 NP-2218-0469A
C630 AA-222204-PP
CROSS REFERENCE GUIDE
Page 148 - 05/2015 Products That Purify High PSI Air & Gas
CON-0266 NP-2214-0123A
DV/HMR NP-2220-0622A
ELL-0111 NP-2214-1020A
GAG-0006W NP-2213-0039A
GAG-0007W NP-2213-0040A
GAG0008S NP-2213-0041A
GAG-0008W NP-2213-0041A
GAG-0009W NP-2213-0042A
GAG-10000 NP-2213-0481A
GAU-0200 NP-2213-0039A
GAU-0600 NP-2213-0040A
GAU-10000 NP-2213-0481A
GAU-1500 NP-2213-0041A
GAU-5000 NP-2213-0722A
GAU-7500 NP-2213-0042A
HMR-0001 NP-2220-0622A
HMR-0005 NP-2220-0659A
HMR-0020 NP-2220-0659A
HMR-0021 NP-2220-0622A
KIT-0101 NP-2201-0398AK
KIT-0101 NP-2201-0399AK
KIT-0102 NP-2202-0396AK
KIT-0103 NP-2201-0400AK
KIT-0104 NP-2202-0394AK
KIT-0105 NP-2201-0199AK
KIT-0105 NP-2201-0401AK
KIT-0106 NP-2202-0474AK
KIT-0107 NP-2201-0397AK
KIT-0108 NP-2202-0395AK
KIT-K20 NP-2201-0488AK
KIT-M16382 NP-2220-0135AK
KIT-N16382 NP-2220-0135AK
N00002 NP-2202-0043A
N00003 NP-2205-0978A
N00004 NP-2202-0044A
N00050 NP-2202-0328A
N00057 NP-2205-0476AK
N00058 NP-2205-0344AK
N00062 NP-2202-0658A
N00070 AA-222202-PP
N00084 NP-2205-0075A
N00086 NP-2202-0045A
N00089 NP-2205-0506A
N00091 NP-2203-0187A
N00102 NP-2205-0602AK
N00109 NP-2205-0076A
N00109 NP-2205-0076AK
N00123 NP-2205-0077A
N00123 NP-2205-0077AK
N00150 NP-2205-0078A
N00150 NP-2205-0078AK
N00160 NP-2202-0527A
N00169 NP-2203-0046A
N00170 NP-2202-0047A
N00171 NP-2205-0079A
N00171 NP-2205-0079AK
N00210 NP-2205-0520A
N00215 NP-2205-0359A
N00220 NP-2202-0048A
N00260 NP-2202-0484A
N00287 NP-2205-0603AK
N00289 NP-2205-0345A
N00293 NP-2202-0496A
N00354 NP-2205-0490A
N00354 NP-2205-0490AK
N00370 NP-2205-0476AK
N00380 NP-2202-0080A
N00475 NP-2203-0189A
N00503 NP-2205-0081A
N00503 NP-2205-0081AK
N00525 NP-2203-0185A
N00582 NP-2202-0082A
N00583 NP-2203-0186A
N00631 NP-2202-0168A
N00633 NP-2203-0188A
N00638 NP-2202-0083A
N00644 NP-2205-0505A
N00644 NP-2205-0505AK
N00654 NP-2205-0346AK
N00724 NP-2205-0084A
N00724 NP-2205-0084AK
n00794 NP-2210-0057A
N00796 NP-2205-0341A
N00823 NP-2210-0836A
N00824 NP-2210-0836A
N00842 NP-2202-0498A
N00858 NP-2210-0378A
N00861 NP-2205-0085A
N00861 NP-2205-0085AK
N01010 NP-2220-0797A
N01014 NP-2203-0185A
N01028 NP-2202-0164A
N01040 NP-2205-0523A
N01042 NP-2205-0603AK
N01059 NP-2202-0049A
N01075 NP-2210-0378A
N01080 NP-2211-0385A
N01082 NP-2211-0384A
N01084 NP-2211-0383A
N01234 NP-2205-0621A
N01262 NP-2205-0322A
N01262 NP-2205-0322AK
N01282 NP-2205-0086A
N01282 NP-2205-0086AK
N01316 NP-2202-0050A
N01338 NP-2202-0161A
N01364 NP-2205-0087A
N01364 NP-2205-0087AK
N01417 NP-2205-0616AK
N01437 NP-2205-0475A
N01461 NP-2211-0389A
N01462 NP-2211-0371A
N01539 NP-2202-0088A
N01776 NP-2205-0089A
N01776 NP-2205-0089AK
N01787 NP-2211-0377A
N02001 NP-2211-0423A
N02003 NP-2218-0133A
N02028 NP-2202-0090A
N02142 NP-2211-0426A
N02169 NP-2202-0091A
N02257 NP-2211-0389A
N02290 NP-2205-0341A
N02320 NP-2202-0092A
N02485 NP-2202-0493A
N02507 NP-2202-0093A
N02515 NP-2201-0033A
N02621 NP-2202-0486A
N02634 NP-2210-0562A
N02638 NP-2203-0179A
N02639 NP-2202-0343A
N02640 NP-2202-0477A
N02647 NP-2211-0601A
N02714 NP-2202-0335A
N02720 NP-2202-0536A
N02726 FC-221020-SB
N02753 NP-2202-0095A
N02768 NP-2207-0464A
N02773 NP-2205-0212A
N02773 NP-2205-0212AK
N02789 NP-2202-0052A
CROSS REFERENCE GUIDE
www.Lawrence-Factor.com 05/2015 - Page 149
N02814 NP-2202-0946A
N02857 NP-2203-0144A
N02858 NP-2202-0704A
N02861 NP-2202-0096A
N02874 NP-2218-0097A
N02889 NP-2202-0503A
N02906 NP-2202-0098A
N02945 NP-2205-0322A
N02945 NP-2205-0322AK
N02963 NP-2211-0391A
N02969 NP-2205-0604A
N02975 NP-2201-0032A
N03013 NP-2202-0099A
N03014 NP-2203-0185A
N03015 NP-2203-0184A
N03029 AA-222203-PP
N03157 NP-2202-0100A
N03158 NP-2205-0520A
N03165 NP-2202-0532A
N03173 NP-2218-0101A
N03215 NP-2211-0370A
N03224 NP-2202-0044A
N03331 NP-2202-0214A
N03340 NP-2202-0514A
N03407 NP-2205-0522A
N03418 NP-2214-0123A
N03458 NP-2214-1020A
N03459 NP-2214-0828A
N03464 NP-2214-0548A
N03474 NP-2205-0505A
N03474 NP-2205-0505AK
N03489 NP-2202-0504A
N03498 NP-2205-0703A
N03504 NP-2214-0171A
N03520 NP-2205-0102A
N03520 NP-2205-0177A
N03521 NP-2202-0103A
N03556 NP-2202-0104A
N03581 NP-2201-0032A
N03608 NP-2214-0105A
N03609 NP-2214-0106A
N03623 NP-2205-0107A
N03624 NP-2205-0108A
N03624 NP-2205-0178A
N03625 NP-2202-0109A
N03629 NP-2214-0547A
N03663 NP-2214-0789A
N03667 NP-2205-0521A
N03702 NP-2203-0180A
N03703 NP-2203-0179A
N03705 NP-2202-0110A
N03712 NP-2202-0111A
N03726 NP-2202-0336A
N03731 NP-2202-0112A
N03732 NP-2202-0163A
N03737 NP-2214-1054A
N03745 NP-2202-0455A
N03811 NP-2214-0171A
N03824 NP-2202-0165A
N03856 NP-2211-0370A
N03857 NP-2214-1054A
N03859 NP-2205-0341A
N03860 NP-2202-0114A
N03951 NP-2202-0509A
N03997 NP-2202-0456A
N04051 NP-2202-0151A
N04058 NP-2202-0457A
N04064 NP-2202-0115A
N04065 NP-2205-0617A
N04067 NP-2201-0889A
N04068 NP-2201-0890A
N04085 NP-2202-0489A
N04146 NP-2202-0327A
N04149 NP-2201-0033A
N04158 NP-2211-0376A
N04159 NP-2218-0116A
N04163 NP-2202-0495A
N04177 NP-2202-0537A
N04178 NP-2202-0693A
N04181 NP-2222-0853A
N04182 NP-2222-0153A
N04185 NP-2222-0170A
N04205 NP-2211-0426A
N04206 NP-2211-0393A
N04333 NP-2202-0510A
N04375 NP-2211-0390A
N04378 NP-2210-0134A
N04385 NP-2202-0458A
N04386 NP-2211-0599A
N04451 NP-2202-0140A
N04496 NP-2202-0155A
N04499 NP-2202-0947A
N04566 NP-2202-0482A
N04586 NP-2202-0160A
N04600 NP-2202-0162A
N04601 NP-2202-0166A
N04602 NP-2202-0148A
N04615 NP-2205-0606AK
N04642 NP-2211-0461A
N04653 NP-2202-0190A
N04654 NP-2202-0213A
N04670 NP-2201-0118A
N04687 NP-2214-0171A
N04756 NP-2205-0620A
N04823 AA-222201-PP
N04825 NP-2202-0332A
N04855 NP-2202-0329A
N04857 NP-2202-0333A
N04859 NP-2211-0426A
N04860 NP-2201-0485A
N04868 NP-2202-0121A
N04869 NP-2202-1008A
N04877 NP-2202-0331A
N04881 NP-2202-0157A
N04882 NP-2202-0326A
N04948 NP-2202-0122A
N05156 NP-2222-0208AK
N05318 NP-2201-0432AK
N05319 NP-2201-0199AK
N05333 NP-2201-0197AK
N05341 NP-2201-0202AK
N05352 NP-2201-0402AK
N05353 NP-2201-0198AK
N05413 NP-2202-0491AK
N05450 NP-2202-0196AK
N05451 NP-2202-0204AK
N05457 NP-2201-0398AK
N05539 NP-2222-0713AK
N05561 NP-2202-0205AK
N05564 NP-2202-0206AK
N05956 NP-2222-0208AK
N06193 NP-2202-0200AK
N06196 NP-2202-0201AK
N06233 NP-2202-0491AK
N06412 NP-2201-0203AK
N06414 NP-2202-0716AK
N06523 NP-2201-0488AK
N07063 NP-2202-0388A
N07091 NP-2202-0150A
N07430 NP-2214-0790A
N07433 NP-2214-0546A
CROSS REFERENCE GUIDE
Page 150 - 05/2015 Products That Purify High PSI Air & Gas
N07441 NP-2214-0483A
N09253 NP-2205-0124A
N09253 NP-2205-0124AK
N15067 NP-2202-0098A
N15093 NP-2202-0487A
N15106 NP-2202-0494A
N15124 NP-2202-0334A
N15133 NP-2202-0465A
N15204 NP-2202-0324A
N15205 NP-2202-0325A
N15265 NP-2202-0472A
N15272 NP-2201-0033A
N15273 NP-2201-0931A
N15274 NP-2201-0930A
N15275 NP-2201-0032A
N15400 NP-2214-0545A
N15406 NP-2203-0387A
N15412 NP-2202-0492A
N15540 NP-2202-0534A
N15691 NP-2205-0607A
N15797 NP-2205-0616AK
N15816 NP-2211-0392A
N16269 NP-2202-0156A
N16313 NP-2211-0390A
N16381 NP-2220-0127A
N16382 NP-2220-0128A
N16382-KIT NP-2220-0135AK
N16383 NP-2220-0838A
N16554 NP-2202-0338A
N16591 NP-2202-0340A
N16620 NP-2218-0469A
N16625 NP-2220-0622A
N17039 NP-2211-0427A
N17040 NP-2211-0854A
N17071 NP-2202-0148A
N17071 NP-2202-0339A
N17959 NP-2202-0478A
N18303 NP-2203-0467A
N18304 NP-2203-0468A
N18305 NP-2202-0453A
N18451 NP-2211-0600A
N18861 NP-2211-0422A
N19120 NP-2202-0508A
N19123 NP-2202-0110A
N19124 NP-2202-0533A
N19368 NP-2202-0501A
N19495 NP-2205-0616AK
N19654 NP-2202-0512A
N19655 NP-2202-0513A
N19833 NP-2211-0425A
N20059 NP-2214-0545A
N20189 NP-2214-0123A
N20202 NP-2214-0547A
N20209 NP-2214-0171A
N20341 NP-2214-0123A
N20683 NP-2211-0833AK
N22719 NP-2214-1020A
N23753 NP-2202-0114A
N23755 NP-2202-0114A
N23810 NP-2211-0530AK
N24788 NP-2202-0647A
N24861 NP-2205-0605AK
N25212 NP-2202-0365A
N25326 FO-220030-PP
N25327 NP-2202-0460A
N25396 NP-2211-0424A
N25452 NP-2202-0511A
N25842 NP-2211-0854A
N25886 AA-222205-PP
N25950 AA-222204-PP
N26281 NP-2202-0453A
N3737 NP-2214-1054A
N3857 NP-2214-1054A
N4499 NP-2202-0947A
N-A NP-2201-1017AK
N-A NP-2203-0403AK
N-A NP-2203-0404AK
N-A NP-2203-0405AK
N-A NP-2203-0406AK
N-A NP-2203-0407AK
N-A NP-2203-0408AK
N-A NP-2203-0409AK
N-A NP-2203-0450AK
N-A NP-2203-0451AK
N-A NP-2203-0452AK
N-A NP-2203-0717AK
N-A NP-2211-0410AK
N-A NP-2211-0411AK
N-A NP-2211-0412AK
N-A NP-2211-0414AK
N-A NP-2211-0415AK
N-A NP-2211-0416AK
N-A NP-2211-0417AK
N-A NP-2211-0418AK
N-A NP-2211-0419AK
N-A NP-2211-0420AK
N-A NP-2211-0421AK
N-A NP-2211-0714AK
N-A NP-2211-0715AK
N-A NP-2211-0795AK
N-A NP-2211-0971AK
N-A NP-2213-0499A
N-A NP-2250-0439AK
N-A NP-2250-0440AK
N-A NP-2250-0441AK
N-A NP-2250-0442AK
N-A NP-2250-0443AK
N-A NP-2250-0444AK
N-A NP-2250-0445AK
N-A NP-2250-0446AK
N-A NP-2250-0447AK
N-A NP-2250-0448AK
N-A NP-2250-0449AK
N-A NP-2250-0667AK
N-A NP-2250-0668AK
NO4776 NP-2202-0459A
NUT-0013 NP-2214-0105A
NUT-0055 NP-2214-0790A
NUT-0062 NP-2205-0476AK
NUT-0118 NP-2205-0603AK
NUT-0119 NP-2205-0345A
NUT-0119 NP-2205-0476AK
NUT-0128 NP-2205-0505A
NUT-0128 NP-2205-0505AK
PLU-0028 NP-2214-0828A
RNG-0033 NP-2202-0150A
RNG-0069 NP-2202-0482A
RNG-0070 NP-2202-0504A
RNG-0097 NP-2202-0093A
SCR-0025 NP-2205-0506A
SCR-0051 NP-2205-0703A
SCR-0062 NP-2205-0490A
SCR-0062 NP-2205-0490AK
SCR-0065 NP-2205-0616AK
SCR-0133 NP-2205-0084A
SCR-0133 NP-2205-0084AK
SCR-0135 NP-2205-0089A
SCR-0135 NP-2205-0089AK
SCR-0136 NP-2205-0087A
SCR-0136 NP-2205-0087AK
SCR-0137 NP-2205-0621A
CROSS REFERENCE GUIDE
www.Lawrence-Factor.com 05/2015 - Page 151
SCR-0138 NP-2205-0085A
SCR-0138 NP-2205-0085AK
SCR-0139 NP-2205-0078A
SCR-0139 NP-2205-0078AK
SCR-0145 NP-2205-0520A
SCR-0155 NP-2205-0523A
SCR-0159 NP-2205-0079A
SCR-0159 NP-2205-0079AK
SCR-0179 NP-2205-0076A
SCR-0179 NP-2205-0076AK
SCR-0180 NP-2205-0081A
SCR-0180 NP-2205-0081AK
SCR-0181 NP-2205-0077A
SCR-0181 NP-2205-0077AK
SCR-0182 NP-2205-0475A
SCR-0183 NP-2205-0322A
SCR-0183 NP-2205-0322AK
SCR-0196 NP-2205-0521A
SEP-0016 NP-2222-0535A
SWT-0006 NP-2220-0814A
SWT-0015 NP-2220-0382A
SWT-0055 NP-2220-0797A
SWT-0119 NP-2220-0139A
SWT-0119-1 NP-2220-0542A
SWT-0160 NP-2220-0138A
SWT-0160-1 NP-2220-0541A
SWT-0258 NP-2220-0801A
SWT-257 NP-2220-0541A
TMR-0008 NP-2220-0587A
TNK-0068 NP-2222-0564A
TNK-0068-KIT NP-2222-0565AK
UNN-0050 NP-2214-0548A
VRK-12II NP-2201-0397AK
WAS-0021 NP-2205-0344AK
WAS-0024 NP-2205-0602AK
Fits Ingersoll Rand®
FITS OEM ITEM NO.
19A11C14 NP-5002-0639A
2-0630 NP-5002-0630A
20A11BM222 NP-5002-0633A
20A11CM006 NP-5002-0644A
20A11CM008 NP-5002-0645A
20A11CM212 NP-5002-0642A
20A11EM031 NP-5002-0718A
30211601 NP-5004-0593A
30211619 NP-5004-0610A
30217202 NP-5004-0613A
30217319 NP-5004-0612A
30294193 NP-5002-0623A
30294235 NP-5002-0628A
30294508 NP-5002-0627A
3029461 NP-5002-0625A
30294821 NP-5002-0631A
30425599 NP-5002-0637A
30439285 NP-5002-0624A
31517931 NP-5002-0630A
32003642 NP-5004-0597A
32003659 NP-5004-0598A
32019721 NP-5002-0641A
32278558 NP-5011-0666A
37002342 NP-5004-0611A
37002383 NP-5004-0596A
37006798 NP-5002-0629A
37006814 NP-5002-0626A
37007390 NP-5002-0615A
37007408 NP-5002-0595AK
37007663 NP-5002-0594A
37124740 NP-5002-0638A
37790177 NP-5002-0635A
3W54045 NP-5022-0871A
3W54047 NP-5022-0798A
3W54048 NP-5022-0798A
3W84893 NP-5022-0798A
3W95921 NP-5022-0798A
95018149 NP-5002-0642A
95018420 NP-5002-0636A
95018438 NP-5002-0635A
95018560 NP-5002-0633A
95022182 NP-5002-0640A
95026183 NP-5002-0718A
95028486 NP-5002-0640A
95097556 NP-5002-0632A
95210225 NP-5002-0644A
95286456 NP-5002-0639A
95674784 NP-5002-0641A
95674842 NP-5002-0634A
MS28782-25 NP-5002-0638A
R22593 NP-5004-0597A
R22594 NP-5004-0598A
R37136 NP-5004-0613A
R37138 NP-5004-0612A
R47245 NP-5004-0611A
R47248 NP-5004-0596A
R8168 NP-5002-0624A
W21480 NP-5002-0625A
W21481 NP-5002-0627A
W21482 NP-5002-0623A
W21483 NP-5002-0628A
W21659 NP-5002-0631A
W75291T70 NP-5004-0610A
W75291T80 NP-5004-0593A
W75496 NP-5002-0630A
W75499 NP-5002-0629A
W75511 NP-5002-0626A
W84807 NP-5011-0666A
W90619 NP-5002-0615A
W90620 NP-5002-0595AK
W99622T7 NP-5002-0594A
W99814T25 NP-5002-0638A
X1026T54 NP-5002-0641A
X1026T55 NP-5002-0634A
X1105T19 NP-5002-0637A
X1524T009H NP-5002-0639A
Fits Ingersoll-Rand®
FITS OEM ITEM NO.
30287858 NP-5001-0466AK
3W54139 NP-5001-0466AK
Fits North American Compressor®
FITS OEM ITEM NO.
250-AB AA-166510-PP
Fits Poseidon®
FITS OEM ITEM NO.
010 02 NP-3005-1013AK
010-7040 NP-3011-0725A
010-787 NP-3011-0728A
020 87 NP-3005-1015AK
020-5396 NP-3011-0724A
020-5842 NP-3011-0727A
020-639 NP-3002-0847A
020-640 NP-3002-0849A
020-647 NP-3011-0832A
020-789 NP-3002-1014A
030-856 NP-3011-0831A
040 860 NP-3001-1010A
040 868 NP-3002-1012A
040 869 NP-3002-1002A
040-158 NP-3011-0729A
CROSS REFERENCE GUIDE
Page 152 - 05/2015 Products That Purify High PSI Air & Gas
050-319 NP-3001-0730AK
070-063 NP-3002-0848A
N-A NP-3001-1016AK
N-A NP-3011-0830AK
N-A NP-3011-0880AK
W1-4121 NP-3001-0840A
W1-4122 NP-3001-0999A
W5-5466 NP-3010-0731A
W5-6358 NP-3001-1004A
W5-6359 NP-3001-0796A
W5-8144 NP-3002-1009A
W5-9400 NP-3006-1019A
W6-2901 NP-3010-0731A
W7-790 NP-3001-0796A
W7-8045 NP-3010-0723A
Fits Reavell® / Mako® / Compair®
FITS OEM ITEM NO.
000N70 AA-656503-PP
001PS1322/1 NP-6602-0911A
001RC200566 NP-6610-0954A
001RR95000/0254 NP-6605-0913AK
001RR95111/0005 NP-6605-0948AK
001RR95148/0014 NP-6605-0914AK
001RR95602/0016 NP-6602-0741A
001RR95602/0054 NP-6602-0735A
001RR95602/0098 NP-6602-0934A
001RR95605/0057 NP-6602-0933A
001RR95640/0007 NP-6602-0912A
001RR95640/0009 NP-6602-0918A
001RR95650/0014 NP-6605-0943A
001RR96072/0029 NP-6603-0942A
001RR98076/1018 NP-6603-0916A
001RR98076/1019 NP-6603-0932A
001RR98076/1021 NP-6603-0941A
001RR98076/1023 NP-6603-0957A
001RR98076/1026 NP-6603-0949A
001RR98076/1044 NP-6603-1068A
001RR98084/1003 NP-6606-0707A
001RR98084/1004 NP-6606-0706A
001RR98438/1001 NP-6610-0950A
001RR98477/1090 NP-6611-0989A
001RR98477/1099 NP-6611-0938A
001RR98477/1100 NP-6611-0953A
001RR98477/1101 NP-6611-0939A
001RR98502/1014 NP-6602-0906A
001RR98502/1015 NP-6602-0907A
001RR98502/1016 NP-6602-0917A
001RR98502/1017 NP-6602-0915A
001RR98502/1021 NP-6602-0905A
001RR98502/1022 NP-6602-0961A
001RR98504/1051 NP-6602-0910A
001RR98504/1118 NP-6602-0996AK
001RR98505/1009 NP-6602-1053A
001RR98650/1199 NP-6601-0773AK
001RR98650/1310 NP-6601-0902A
001RR98650/1311 NP-6601-0959A
001RR98660/1061 NP-6604-0940A
00313758 NP-6621-0769A
00354RS2V NP-6602-0910A
003M2000CM NP-6613-0924A
003M2256CM NP-6613-0922A
003M2257CM NP-6613-0923A
003M2259CM NP-6613-0925A
003M2261CM NP-6613-0928A
003M96201 NP-6620-0851A
007N70 NP-6621-0909A
011RR98076/1022 NP-6603-0956A
01RR9804/1001 NP-6606-0708A
13758 NP-6621-0769A
95000/0254 NP-6605-0913AK
95000/0255 NP-6605-1067A
95000/0255 NP-6605-1067AK
95000/0256 NP-6605-1048AK
95000/0262 NP-6605-1064AK
95111/0004 NP-6605-1079A
95111/0004 NP-6605-1079AK
95111/0005 NP-6605-0948AK
95148/0014 NP-6605-0914AK
95179/0006 NP-6605-1106A
95602/0015 NP-6602-1102A
95602/0016 NP-6602-0741A
95602/0017 NP-6602-0742A
95602/0018 NP-6602-0743A
95602/0022 NP-6602-0746A
95602/0040 NP-6602-0751A
95602/0041 NP-6602-0752A
95602/0045 NP-6602-0754A
95602/0050 NP-6602-0734A
95602/0051 NP-6602-0755A
95602/0052 NP-6602-0756A
95602/0054 NP-6602-0735A
95602/0057 NP-6602-1061A
95602/0058 NP-6602-0758A
95602/0059 NP-6602-0759A
95602/0061 NP-6602-0761A
95602/0075 NP-6602-1110A
95602/0087 NP-6602-1059A
95602/0088 NP-6602-1065A
95602/0090 NP-6602-1060A
95602/0098 NP-6602-0934A
95605/0057 NP-6602-0933A
95640/0007 NP-6602-0912A
95640/0009 NP-6602-0918A
95640/0014 NP-6602-1047A
95650/0014 NP-6605-0943A
96004/0013 NP-6603-1097A
96072/0029 NP-6603-0942A
98076/1018 NP-6603-0916A
98076/1019 NP-6603-0932A
98076/1021 NP-6603-0941A
98076/1022 NP-6603-0956A
98076/1023 NP-6603-0957A
98076/1026 NP-6603-0949A
98076/1044 NP-6603-1068A
98076/1063 NP-6603-0941A
98084/1001 NP-6606-0708A
98084/1003 NP-6606-0707A
98084/1004 NP-6606-0706A
98086/1016 NP-6605-1062AK
98262/1036 NP-6621-0769A
98262/1037 AA-656503-PP
98438/1001 NP-6610-0950A
98438/1002 NP-6610-0954A
98477/1090 NP-6611-0989A
98477/1099 NP-6611-0938A
98477/1100 NP-6611-0953A
98477/1101 NP-6611-0939A
98502/1013 NP-6602-0768A
98502/1014 NP-6602-0906A
98502/1015 NP-6602-0907A
98502/1016 NP-6602-0917A
98502/1017 NP-6602-0915A
98502/1022 NP-6602-0961A
98504/1028 NP-6602-0960A
98504/1029 NP-6602-0908A
98504/1030 NP-6602-0767A
98504/1051 NP-6602-0910A
98504/1106 NP-6602-0734A
98504/1106 NP-6602-0751A
98504/1118 NP-6602-0996AK
CROSS REFERENCE GUIDE
www.Lawrence-Factor.com 05/2015 - Page 153
98505/1009 NP-6602-1053A
98650/1021 NP-6602-0905A
98650/1163 NP-6615-1024A
98650/11638.3 NP-6615-1024A
98650/116497 NP-6615-1044A
98650/1171 NP-6615-1024A
98650/1192 NP-6615-1044A
98650/1199 NP-6601-0773AK
98650/1215 NP-6601-0774AK
98650/1220 NP-6615-1024A
98650/1221 NP-6615-1081A
98650/1310 NP-6601-0902A
98650/1311 NP-6601-0959A
98650/1330 NP-6615-1081A
98650/1561 NP-6601-0959A
98650/1883-F10 NP-6605-0968A
98660/1061 NP-6604-0940A
C200566 NP-6610-0954A
C200567 NP-6610-0732A
C201235/100 NP-6610-0732A
C201653-F10 NP-6605-0968A
C201654 NP-6616-0903A
C201654-G10 NP-6605-0920A
C201654-G6 NP-6616-0903A
C201654-G6/M6 NP-6616-0903A
C201654-M6 NP-6616-0903A
C203113/50 NP-6610-0732A
F10 NP-6605-0968A
G10 NP-6605-0920A
LT6495/56 NP-6602-1049A
M2000CM NP-6613-0924A
M2256CM NP-6613-0922A
M2257CM NP-6613-0923A
M2259CM NP-6613-0925A
M2262CM NP-6613-0928A
M96201 NP-6620-0851A
N70 NP-6621-0909A
PS1322/1 NP-6602-0911A
PS1322/2 NP-6602-0910A
PS1322/2 NP-6602-0933A
Technical Supplies
FITS OEM ITEM NO.
N-A NP-0013-0896A
N-A NP-0013-0897A
N-A NP-0013-0898A
N-A NP-0013-0899A
N-A NP-0013-0900A
N-A NP-0015-0560A
N-A NP-0020-0553A
N-A NP-0020-0555A
N-A NP-0020-0661A
N-A NP-0020-1039A
N-A NP-0021-0869A
N-A NP-0022-0551AK
N-A NP-0022-0552A
N-A NP-0022-0571A
N-A NP-0022-0572A
N-A NP-0022-0573A
N-A NP-0022-0574A
N-A NP-0022-0576AK
N-A NP-0022-0648AK
N-A NP-0022-0649AK
N-A NP-0022-0650AK
N-A NP-0022-0651AK
N-A NP-0022-0653A
N-A NP-0022-0654A
N-A NP-0022-0655A
N-A NP-0022-0881AK
N-A NP-0022-0882AK
N-A NP-0022-1078A
N-A VL-530110-AF
N-A VL-530111-AF
N-A VL-530113-BD
N-A VL-530130-TH
N-A VL-530131-TH
N-A VL-530141-TG
N-A VL-531121-TE
VAL-0006 VL-530112-BE
Filters
Fits Aero Dri® / Keco® / Gannon®
FITS OEM ITEM NO.
MA1 X44100
C06 X44420
C113X X44670
C14A X44680
C1AA X44250
C1AC X44220
MF-1-5894 FC-444401-WF
NA X44190
NA X44350
NA X44440
NA X44520
NA X44690
Fits Air Dry® Corporation of America
FITS OEM ITEM NO.
54048-CL X24670-C
G4041 X24677
G4042 X24687
G4042-1 X24357
G4043 X24667
G4044 X24657
G4045 X24107
G4046 X24257
G4047 X24227
G4047-1 X24627
G4047-1-C9 X24247
G404-C-9 X24487
G4061 X45670
G4065 X45100
G4065 X45650
G4066 X45250
G4067 X45220
G4067 X45680
G4071 X206711
G4071 Special X206711-C
G4072 X206811
G4072-1 X203511
G4073 X206611
G4074 X206511
G4075 X201011
G4076 X202511
G4077 X202211
G4077-1C9 X202411
G4081 X24670
G4082 X24680
G4082-1 X24350
G4082-1 X24350-C
G4083 X24660
G4084 X24650
G4085 X24100
G4086 X24250
G4087 X24220
G4087-1 X24620
G4087-1C9 X24240
G408-C-9 X24480
G4090-0 X796711
G4091-7 X792211
CROSS REFERENCE GUIDE
Page 154 - 05/2015 Products That Purify High PSI Air & Gas
G4092-1 X793511
NA X204211
NA X24147-C
NA X24420
NA X24427
NA X24430
NA X24500
NA X24507
NA X45440
NA X45520
NA X792411
NA X796311
Fits Alkin®
FITS OEM ITEM NO.
6556 X14247
6556 X14249
7293 X14628
7764-03 AA-140101-PP
Alkin® X14677
Alkin® Dryer X14678
Alkin® Dryer X14679
Alkin® Purifier X14248
NA X14627
Fits Allied Air Products®
FITS OEM ITEM NO.
AP-1 X10248
AP-2 X10678
NA X10228
NA X10628
Fits Alta Robbins®
FITS OEM ITEM NO.
BCD-13X X72670
BCD-AC X72220
BCD-H1 X72420
NA X72180
NA X72185
NA X72235
NA X72240
NA X72255
NA X72430
NA X72500
NA X72505
NA X72600
NA X72605
NA X72620
NA X72655
NA X72800
NA X72805
SPT-13X X72675
SPT-AC X72225
SPT-C1 X72245
SPT-C2 X72625
SPT-C3 X72435
SPT-C4 X72635
SPT-C5 X72535
Fits American Bristol Industries® / Scott®
FITS OEM ITEM NO.
22445 AA-262601-PP
42-X5A X286717
42XCAC X282417
50AC X26222
50-ALS X266245
50C X26422
50CAC X26432
50-CAC9 X26439
50X X26672
50-X9 X26679
50XAC X26622
50XCAC X26242
52-XCAC X282414
60-CAC X274351
60X X276751
60X-10C X27670
65 CAC X254351
65X X256751
65X-10C X25670
65X-10CA X25670-A
65XCAC X254951
65XCAC-SPEC X252451
AB281251 FC-262601-WF
AB281273 AA-282803-PP
ABE065387 AA-250001-PP
B9-C23-4 X267713
NA X255451
NA X26252
NA X26502
NA X26602
NA X26802
NA X274951
NA X275451
NA X29222
Y-24504 X29672
Y-26450 X29242
Y-26455 X29622
Fits Bauer Compressor®
FITS OEM ITEM NO.
04852 X23226
058827 Special X22247
061858 FC-220028-SB
061859 FC-220027-SB
061860 FC-220029-SB
066471 X22221
06961 X23629
090569A X22687
57679 X22629
58820 X22620
58821 X22240
58823 X22217
58823 Special X22227
58824 X22257
58825 X22677
58826 X22627
58827 X22237
59183 X22249
60030 X22560
60031 X22570
60035 X22377
60036 X22517
60037 X22577
61686 X22511
61687 X22571
62565 X22621
63282 X22470
65562 X22477
67224 X22231
68416 X22427
68481 X22420
72767 X22650
80100 X21620
80114 X21240
N0070 AA-222202-PP
N02726 FC-221020-SB
N03029 AA-222203-PP
N04823 AA-222201-PP
N15839 FO-220031-PP
N25326/G FO-220030-PP
CROSS REFERENCE GUIDE
www.Lawrence-Factor.com 05/2015 - Page 155
N25886 AA-222205-PP
N25950 AA-222204-PP
NA X21150
NA X21350-C
NA X22220
NA X22229
NA X22241
NA X22437
NA X22501
NA X22657
NA X22670
NA X22671
NA X22679
NA X22689
NA X23626
NA X23676
Fits Bristol Pneumatics®
FITS OEM ITEM NO.
26485 X196217
NA X192214
NA X192217
NA X192412
NA X192417
NA X196714
NA X196717
Y38947 X196214
Y39390 X192414
YC8974 X196212
Fits Coltri® / Max Air® / Nuvair®
FITS OEM ITEM NO.
040-823 AA-300023-PP
059085 X30629
070-0 AA-300022-PP
Aero Sub® Dryer X156717
Aero Sub® Purifier X151217
IF-35A AA-150080-PP
MCH13 AA-510030-PP
NA X152212
NA X152412
NA X153012
NA X156212
NA X156712
NA X302214
NA X30229
NA X302414
NA X30249
NA X30439
NA X305014
NA X30509
NA X306014
NA X30609
NA X306114
NA X306214
NA X306714
NA X30679
NA X306814
NA X308014
NA X49618
NA X49688
SC000543-M X49678
SC000543-MHC X49238
SC000543-MHCP X49578
Fits Deltech® / Del-Monox®
FITS OEM ITEM NO.
BA102 X854534
BA4 X85647
BA5 X863429
NA X856434
NA X85677
NA X856934
Fits Eagle Compressor®
FITS OEM ITEM NO.
23-0104 AA-360101-PP
23-0106 / 3272282 AA-360102-PP
23-0107 / 32734147 AA-360103-PP
50A001 X43672
50A003 X43242
50A0X9 X43679
50CL01 X33677
50CL03 X34247
50CM01 X336722
50CM03 X342422
50CS01 X33670
50CS03 X34240
50L02 X37225
50M394 FC-365030-SB
50ML01 X36677
50ML03 X36247
50ML-A X36257
50ML-AC X36227
50ML-SG X36107
50ML-XAC X36627
50MM01 X366722
50MM03 X362422
50MRM03 X642422
50MRS03 X64240
50MS01 X36670
50MS03 X36240
50MS-A X36250
50MS-AC X36220
50MS-SG X36100
50MS-XAC X36620
50PL01 X406751
50PL03 X404951
50PM01 X40670
50PM03 X40490
50RL01 X37675
50RL03 X37245
50RL04 X37625
50RL05 X37435
50RS01 X37670
50RS02 X37220
50-S001 X38670
50-S002 X38520
50-S003 X38230
50-S0AC X38220
50-SCAC X38440
50-TX03 X42249
BP-0942 AA-360104-PP
EC004239 X33227
KA1005 / 32738973 AA-360106-PP
KA1997 / 32733883 AA-360105-PP
NA AA-360107-PP
NA AA-360108-PP
NA X36430
NA X36507
NA X37420
NA X37425
NA X37685
NA X414917
NA X416717
Fits Fluid Concepts®
FITS OEM ITEM NO.
A10-005 X35248
A10-010 X35678
NA X35228
CROSS REFERENCE GUIDE
Page 156 - 05/2015 Products That Purify High PSI Air & Gas
NA X35628
Fits Hamworthy England®
FITS OEM ITEM NO.
Y30299 X13624
Y30304, PAS18 X13244
Y51166 X13622
Y51169 X13242
Fits Ingersoll-Rand®
FITS OEM ITEM NO.
123708TI X504534
NA X506434
NA X506734
Fits Jordair®
FITS OEM ITEM NO.
FC-1001-SS X56220
FC-1001-TS X58220
FC-1002-SS X56500
FC-1002-TS X58500
FC-1003-SS X56250
FC-1003-TS X58250
FC-1004-SS X56670
FC-1004-TS X58670
FC-1005-SS X56620
FC-1005-TS X58620
FC-1006-SS X56430
FC-1006-TS X58430
FC-1007-SS X56790
FC-1007-TS X58790
FC-1008-SE FC-591012-WF
FC-1501-NS X61220
FC-1502-NS X61500
FC-1503-NS X61250
FC-1504-NS X61670
FC-1505-NS X61620
FC-1506-NS X61430
FC-1507-NS X61790
FC-2001-SS X56228
FC-2001-TS X58228
FC-2002-SS X56508
FC-2002-TS X58508
FC-2003-SS X56258
FC-2003-TS X58258
FC-2004-SS X56678
FC-2004-TS X58678
FC-2005-SS X56628
FC-2005-TS X58628
FC-2006-SS X56438
FC-2006-TS X58438
FC-2007-SS X56798
FC-2007-TS X58798
FC-2501-NS X61228
FC-2502-NS X61508
FC-2503-NS X61258
FC-2504-NS X61678
FC-2505-NS X61628
FC-2506-NS X61438
FC-2507-JB X57798
FC-2507-NS X61798
FC-3001-SS X56227
FC-3001-TS X58227
FC-3002-SS X56507
FC-3002-TS X58507
FC-3003-SS X56257
FC-3003-TS X58257
FC-3004-SS X56677
FC-3004-TS X58677
FC-3005-SS X56627
FC-3005-TS X58627
FC-3006-SS X56437
FC-3006-TS X58437
FC-3007-SS X56797
FC-3007-TS X58797
FC-3501-NS X61227
FC-3502-NS X61507
FC-3503-NS X61257
FC-3504-NS X61677
FC-3505-NS X61627
FC-3506-NS X61437
FC-3507-NS X61797
FC-507-NS X62790
FC-705-NS X63790
FC-708-SE FC-591017-WF
KTP-1001-JB X57220
KTP-1004-JB X57670
KTP-1005-JB X57620
KTP-1006-JB X57430
KTP-1007-JB X57790
KTP-2001-JB X57221
KTP-2004-JB X57671
KTP-2005-JB X57621
KTP-2006-JB X57431
KTP-2007-JB X57791
KTP-3001-JB X57227
KTP-3004-JB X57677
KTP-3005-JB X57627
KTP-3006-JB X57437
KTP-3007-JB X57797
NA X56240
NA X56247
NA X56248
NA X58240
NA X58247
NA X58248
NA X61240
NA X61247
NA X61248
Fits L & W Compressor®
FITS OEM ITEM NO.
000644 X32629
001466, 45080053 X322214
001467, 3790 X322222
001468, 8070 X326822
002309 X32249
002310 X32229
002311 X32679
002476 X32689
4508005 X326214
4508022 X326222
NA X322414
NA X322422
NA X326714
NA X326722
Fits Lawrence Factor®
FITS OEM ITEM NO.
Hanging Mech. Filter FC-530550-SB
NA FC-530552-SB
NA X104-2420
NA X46220
NA X46240
NA X46247
NA X46677
NA X46678
NA X530730
NA X53077
NA X53078
NA X53087
CROSS REFERENCE GUIDE
www.Lawrence-Factor.com 05/2015 - Page 157
NA X53107
NA X53117
NA X53120
NA X53137
NA X53157
NA X53167
NA X53177
NA X53180
NA X53187
NA X532055
NA X53207
NA X53208
NA X53220
NA X532255
NA X53227
NA X53228
NA X53237
NA X53240
NA X532414
NA X532417
NA X532419
NA X532441
NA X53245
NA X532455
NA X53247
NA X53257
NA X53267
NA X53420
NA X53430
NA X53437
NA X534534
NA X53467
NA X53470
NA X53477
NA X53487
NA X53497
NA X53500
NA X535055
NA X53507
NA X53537
NA X53547
NA X53617
NA X53620
NA X536255
NA X53627
NA X53650
NA X536554
NA X536555
NA X53657
NA X53667
NA X53670
NA X536741
NA X536755
NA X53677
NA X53680
NA X53687
NA X53697
NA X541115
NA X54150
NA X541615
NA X54167
NA X54177
NA X54207
NA X542223
NA X54227
NA X54240
NA X54241
NA X542414
NA X542415
NA X542420
NA X542423
NA X54247
NA X54248
NA X54249
NA X54257
NA X543055
NA X54440
NA X545015
NA X54507
NA X54537
NA X546015
NA X54620
NA X54621
NA X546215
NA X546220
NA X546223
NA X54650
NA X546555
NA X54657
NA X54670
NA X54671
NA X546715
NA X546720
NA X546723
NA X546755
NA X54677
NA X54678
NA X54680
NA X546855
NA X54687
NA X548015
NA X60247
NA X60677
NA X803011
NA X804311
NA X804811
NA X806711
NA X806911
NA X816511
NA X816711
NA X816811
NA X822211
NA X822427
NA X822527
NA X826227
NA X826727
NA X827311
NA X827327
NA X96077
NA X96177
NA X96318
NA X96330
NA X96337
NA X96338
NA X96367
NA X96507
NA X96657
NA X96677
NA X96678
NA X96687
NA X96780
NA X-CELL 01
NA X-CELL 02
NA X-CELL 05
NA X-CELL 10
NA X-CELL 15
NA X-CELL 20
NA X-CELL 30
NA X-CELL 40
Special FC-532050-MF
Special FC-532051-MF
CROSS REFERENCE GUIDE
Page 158 - 05/2015 Products That Purify High PSI Air & Gas
Standing Mech. Filter FC-530551-SB
Standing Mech. Filter FC-530751-MF
Fits Mako Compressor® / Comp Air®
FITS OEM ITEM NO.
04852 X65226
06961 X65229
06961 X65629
98262-1060 AA-656501-PP
98262-1148 FO-650100-PP
M212 FC-655063-SB
N02726 FC-651060-SB
N70 AA-656503-PP
NA X65237
NA X65457
NA X65500
NA X65507
NA X65600
NA X65607
NA X65637
NA X65797
NA X65800
NA X65807
NA X65887
PC-1101 X65100
PC-1201 X65220
PC-1401 X65250
PC-1501 X65670
PC-1601 X65620
PC-1801 X65240
PC-2001 X65430
PD-1103 X65107
PD-1203 X65227
PD-1403 X65257
PD-1503 X65677
PD-1603 X65627
PD-1802 X65248
PD-1803 X65247
PD-2003 X65437
X0225 AA-656502-PP
Fits Midland Diving Equipment®
FITS OEM ITEM NO.
X89624
H015039 X874017
H015050 X874117
H015055 X872217
H034153 X89404
H034158 X89414
H034159 X89224
H034167 X89674
H035712 X88400
H035720 X88410
H035730 X88220
H036107 X894051
H036120 X894151
H036130 X892251
NA X872417
NA X876217
NA X88240
NA X88620
NA X892451
NA X896251
NA X896751
Fits Nardi®
FITS OEM ITEM NO.
NA X912441
NA X91629
Fits North American®
FITS OEM ITEM NO.
ABY39283 AA-166510-PP
Fits Schifauer & Pek®
FITS OEM ITEM NO.
Schifauer & Pek® X162418
Schifauer & Pek® X162419
Schifauer & Pek® X166218
CROSS REFERENCE GUIDE
www.Lawrence-Factor.com 05/2015 - Page 159