Lava Digital Veneering System...
Transcript of Lava Digital Veneering System...
Digital Crown
Lava™ DVSDigital Veneering System
Full Contour
Full contour production made easy with the Lava™ DVS Digital Veneering System. Now with the Lava DVS system, dental labs can produce more crowns per day than with pressed ceramics or traditional hand-layered
porcelain techniques.
How? By starting with a full contour software design and coupling it with CAD/CAM—driven productivity. The digital design file enables precision
milling of the ceramic porcelain and the zirconia coping. The fusion of the ceramic and the zirconia deliver an unmatched esthetic restoration.
A Faster Path to Beauty
After fusion, the restoration is ready for characterization4
The software design process provides optimum support every time1
2 Design and mill the Lava™ Zirconia Coping and Lava™ DVS Veneer
Taking Innovation to the Top
5 Completed Lava™ DVS Crown offers beauty and strength
Fuse together with Lava™ DVS Fusion Porcelain3
Red indicates unsupported porcelain; green indicates proper support.
“ When taking scans from the Lava™ Chairside Oral Scanner C.O.S., our ceramists can finish
2.6 times as many Lava™ DVS crowns in the time it takes to finish one traditional hand-layered
zirconia crown, and we are able to produce restorations of comparable or better quality.”
– Steve Daggett, CDT, D&S Dental Laboratory, Inc.
1. Average hands-on ceramist time to complete overlay porcelain for hand-layered cases was 38.8 min; time to with Lava DVS was 20.7 min. Software design time not included. Based on a customer survey. Includes averages from 2 months of production activity for 6 labs, or approximately 2,100 cases.
On average, the Lava DVS ceramic finishing process requires nearly half the
hands-on manual labor time as a traditional hand-layered porcelain to zirconia process.
Average number of crowns finished in two hours1
Lava™ DVS Crown
Hand-layered Crown
4,500
4,000
3,500
3,000
2,500
2,000
1,500
1,000
500
0.0Lava™ DVS
Crown
1.2mm
Lava™ ZirconiaSimple Core with
Pressable Ceramics
1.2mm
Frac
ture
For
ce (N
)
Source: 3M ESPE Internal Test Method
Posterior Crowns— Initial Fracture Force
Design and mill the Lava™ Zirconia Coping and Lava™ DVS Veneer
Double Your Output
Consistent Strength
Red indicates unsupported porcelain; green indicates proper support.
The strength of Lava™ DVS crowns
make them an ideal solution.
Why? Our controlled CAD/CAM
process and a strong zirconia core
ensure Lava™ DVS restorations are
strong and beautiful every time—
even when the dentist provides
a conservative prep and uses
conventional cementation.
“ When taking scans from the Lava™ Chairside Oral Scanner C.O.S., our ceramists can finish
2.6 times as many Lava™ DVS crowns in the time it takes to finish one traditional hand-layered
zirconia crown, and we are able to produce restorations of comparable or better quality.”
– Steve Daggett, CDT, D&S Dental Laboratory, Inc.
“ In a little more than seven hours, I can complete
25 Lava™ DVS crowns that match the quality of
our hand-layered zirconia restorations.”
– Jed Miller, Ceramist.
Esthetic Excellence
Our PaletteYour Artistry
10 Fusion Porcelain Powders 4 Corrective Porcelain Powders
4 Shades
6 Stains
Lava™ DVS Glass Ceramic Material
Lava™ DVS Fusion Porcelain Lava™ Zirconia
Lava™ DVS Stains/Shades/Glaze
3M ESPE Customer Care Center at 1-800-634-2249 3MESPE.com/LavaDVS
3M CanadaPost Office Box 5757London, Ontario N6A 4T1Canada1-888-363-36853MESPE.ca/lava
Dental Products3M CenterBuilding 275-2SE-03St. Paul, MN 55144-1000USA
3M, ESPE and Lava are trademarks of 3M or 3M ESPE AG. Used under license in Canada.VITA is a registered trademark of Zahnfabrik H Rauter GmbH & Co KG.
Please recycle. Printed in USA.© 3M 2010. All rights reserved.70-2013-0242-2
It’s easy to offer Lava™ DVS Crowns
1. Talk to your 3M Specialist about guidelines and instructions for your Lava™ Form
2. Lava™ CNC 240 Milling Machine is scheduled for release later this year
• Order a Trial Kit and sign up for one of our training sessions
• Outsource milling to an Authorized Lava™ DVS Milling Center. Find one at 3MESPE.com/LavaDVS.
Try it First!
Ordering Information
Item # Product Information
68473 Lava™ DVS Trial Kit Kit Includes: 3 – 15g Lava DVS Fusion Porcelain (D1, D3, D6); 2 – 15g Lava DVS Corrective Porcelain Powders (CR1, CR2); 1 – 40ml Lava DVS Modeling Liquid; 1 – 5g Lava DVS Glaze; 1 – 40ml Lava DVS Shade/Stain/Glaze Liquid; Lava DVS CD-Rom, Lava DVS Dosing Aid, Instructions for Use Step-by-Step Guide, (including firing table and conversion table to VITA® Classic)
68443 Lava™ DVS Introductory Kit Kit Includes: 10 Fusion Porcelain Powders; 4 Corrective Porcelain Powders; 6 Stains; 4 Shades; 1 Glaze; 1 Shade/Stain/Glaze Liquid; 1 Modeling Liquid; Shade Guide, Dosing Aid, Step-by-Step Guide (including firing table and conversion table to VITA® Classic)
68444 Lava™ DVS Shade Guide
For the complete list of Lava DVS materials, visit 3MESPE.com/LavaDVS
Lava™ DVS Trial Kit
Lava™ DVS Introductory Kit
Outsource
• Outsource the milling to an Authorized Lava DVS Milling Center
• You have the option to design, fuse, or just stain and glaze
Mill it Yourself!
• Retrofit your Lava™ Form Milling Machine1
• Upgrade to a Lava™ CNC 2402 or a Lava™ CNC 500 Milling Machine. Talk to your 3M Specialist about trade in promotions and specials