A Step By Step Guide

2015

heatsign

11/21/2015

Laser Marking Machines vs Dot Peen Marking Machine What Makes

Them Different

With the quick propelling innovation today, the business sector is overwhelmed with decisions

for stamping parts of metals and in addition non-metals. At the point when there is more than

one decision, the requirement for examination emerges so that we just pick the item that best

addresses our issues. For this situation, we have to settle on decision between the most

mainstream stamping frameworks.

The following is an examination between laser marking machines and a dab peen checking

machine. Subsequent to perusing this article, you will have the capacity to settle on the two

innovations.

Lasers have been around the checking business for more than 50 years. The applications are as

broad as their wattages and wavelengths. Laser stamping and additionally imprinting is a

generally raising commercial center as clients have now distinguished the advantages of

utilizing lasers over customary techniques for direct part checking like speck peen.

All in all, what are the advantages that have turned the business head over heels?

Contrast vs. No Contrast

A spot peen checking machine really dislodges the material and gives no perceptible difference

to the markings. This makes discovering the markings or codes like information frameworks

hard and perusing exceptionally troublesome. It likewise makes it difficult to get a high-review

quality stamping.

Laser checking frameworks then again give the darkest contrast on an expansive assortment of

materials as the markings can be a shading change onto the plastic or even a surface temper.

The laser denoting machine's focused vitality makes the complexity at first glance and takes

into account review "An" information lattices onto plastics, metals or earthenware production.

Marking Versatility vs. Limited Marking

The PC controlled interface that drives the bar directing mirrors and the limit of laser

checking machines to ensure a reliable yield supplies with a stamping consistency for

practically 99.99% of the time. It in like manner licenses stamping of logos, barcoding,

representation, photos, CAD based delineations or any honest to goodness kind of content

style required. A touch peen checking machine can simply make data matrix and

alphanumeric codes.

No Consumables vs. Consumables

Lasers expend nothing with the exception of power. Then again, a dab peen stamping

machine requires the substitution of the metallic tip after an express time period, which

implies that the spot peen checking machines require upkeep when utilized every day. At

the point when utilizing laser stamping machines, there is no yearly support required or

consumables in this way, you will dependably be prepared for denoting your next venture.

Impact Marking vs. Non-Impact Marking

Dot peens require a blunt impact on the metallic or non-metallic surface. The file creation is

only limited to data matrix code and text only. In addition, lasers do not require earplugs for

surrounding manufacturing cells or operators because they are extremely quiet machines.

HeatSign laser marking machines provide non-contact markings from start to end. The part

simply needs to be placed at the proper focal height under the laser and the laser will etch

the part without the need for washing, surface treatment or even consumables.

Adaptability versus Single Marking Type

Laser stamping frameworks are fit for a few various types of markings.

Surface Annealing: It alludes to the shading change that shows up specifically on the

surface of the metal that is being stamped.

Shading Changing: This is for plastics, and like surface tempering. It is straightforwardly

performed on the surface of the strong.

Drawing: This is the third sort of stamping which alludes to the slight entrance of the

substrates' surface. It ordinarily has less difference than the shading changed markings or

tempered markings.

Etching: This is the last sort of stamping. Like drawing, etching punctures the surface yet

goes much more profound. It normally goes from 0.003" and higher. A spot peen checking

machine can just make more profound, barely wedged engravings however just onto harder

metals on the grounds that pottery or plastics will be harmed by such a profound effect.

Besides, spot peen units require a level surface while laser checking machines have little

worry over part geometry. With a central scope of 0.25" to 0.5", lasers can even handle

round and hollow shapes without any difficulty. With the presentation of a revolving toss

gadget, lasers are likewise ready to give 360 markings

Marking Quality v. Dot Patterning

Laser stamping machines give a checking spot as low as 15 microns giving them the ability to

stamp Hi-determination pictures and representation, or even messages that are as little as 100

microns tall. Then again, spot peen units are just ready to handle fundamental alpha numeric in

only a solitary text style sort, with spaces and breaks between every peen.

To total it all up, laser stamping machines are much more progressed and give enhanced quality

markings when contrasted with speck peen units. They are calm and non-effect to have in your

creation or assembling office while likewise offering more prominent checking flexibility. The

favorable circumstances are clear and the decision ought to be evident at this point.

On the off chance that you need to take in more with respect to the most recent laser stamping

machines particularly a spot peen checking machine, please contact HeatSign. HeatSign is a

rumored merchant of an assortment of laser checking instruments. To get the best

arrangements, visit our site, www.heatsign.com. You can likewise email us on

info@heatsign.com or call us on +86 15061477073.