924K 930K 938K Wheel Loaders

924K 930K 938K

Engine Model Catreg C71 ACERTtrade Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW (143 hp) 119 kW (162 hp) 140 kW (190 hp)

ISO 14396 105 kW (141 hp) 119 kW (160 hp) 140 kW (188 hp)

Bucket Capacity 17-50 m3 (22-65 yd3) 21-50 m3 (27-65 yd3) 25-50 m3 (33-65 yd3)

Full Turn Tip Load 7488 kg (16508 lb) 8477 kg (18689 lb) 9698 kg (21380 lb)

Operating Weight 11 550 kg (25464 lb) 13 135 kg (28958 lb) 15 146 kg (33301 lb)

Engine meets US EPA Tier 3EU Stage IIIA emission standards

2

Experience the Difference

Optimized Parallel Lift Z-bar Linkage Combines the digging effi ciency of a traditional Z-bar with tool carrier capabilities for superior performance and fl exibility

Cab and Controls Large spacious cab features excellent visibility to the front and rear extremely low sound levels and low-effort ergonomic joystick controls so you can concentrate on your work In cab adjustments are easy with intuitive controls and an easy to read optional display

Intelligent Power Management A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb groundspeed control for fast digging cycles and the fl exibility to effi ciently perform a multitude of tasks

Powerful Predictable Hydraulics The system senses demand and adjusts fl ow and pressure to match Working with buckets forks and other work tools has never been more effi cient

Work Tools A new line of optimized Performance Series buckets pallet and construction forks as well as a wide range of work tools are available in a Pin-on Fusiontrade coupler or ISO 23727 coupler interface

Serviceability Daily service points are easily accessible from ground level Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner

Contents Parallel Lift Loader Linkage 4

Industry Leading Operator Station 5

Power Train 6

Hydraulics 7

Work Tools 8

Options 9

Serviceability and Customer Support 10

Wheel Loader Specifications 11

Bucket Specifications 18

Sand and Gravel Bucket Specifications 27

Operating Specifications 28

Supplemental Specifications 32

Standard Equipment 33

Optional Equipment34

3

The Cat 924K 930K and 938K Wheel Loaders set a new standard for productivity fuel efficiency and comfort Extremely low sound levels large spacious cab and intuitive controls keep you working comfortably all day long The new optimized Z-bar loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier Experience the new industry benchmark

Parallel Lift Loader Linkage Optimized Z-bar linkage delivers enhanced visibility with maximum productivity

Optimized Z-bar Linkage The new optimized patent-pending Z-bar linkage

combines the digging efficiency of a traditional Z-bar

with tool carrier capabilities for great performance

and versatility

bull Parallel lift and high tilt forces throughout the

working range help you safely and confidently

handle loads with precise control

bull Linkage features excellent visibility to the bucket

cutting edge and fork tips

bull High Lift versions are also available on the 930K

and 938K

4

Industry Leading Operator Station Superior visibility ergonomics and comfort

Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab

bull Extremely low sound levels

bull Superior visibility to the work tool due to wide curved windshield redesigned Z-bar linkage

lines routing and work tool design

bull Automatic temperature control

bull Seat-mounted ergonomic joystick for lift and tilt functions Joystick includes integrated ForwardNeutral

Reverse switch and optional differential lock trigger third and fourth function auxiliary hydraulics

bull Easy access to the cab with ergonomically placed grab rails walk-up steps and large platform

Easy to Use Instrument Panel and Display An optional secondary display provides easy access to vital machine parameters and works in

conjunction with the standard soft touch panel to allow real time adjustments

bull Machine information and diagnostics at a glance

bull Real time and historic fuel usage

bull Backup camera display

bull Help button plus 22 language capability

bull Adjustment of functions such as creep third function flow throttle and rimpull

5

Power Train Maximum machine power reduced fuel consumption

Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the

machine working at peak efficiency

Engine The Cat C71 ACERT engine provides cleaner quieter operation while delivering superior performance and durability The engine meets

US EPA Tier 3 and EU Stage IIIA emission requirements Maximum engine speed is now 1800 rpm for reduced fuel consumption and

lower sound levels The engine also features

bull Class-leading fuel efficiency significantly reducing owning and operating costs

bull Configurable auto idle shut down feature as standard equipment

Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb

groundspeed control for a multitude of tasks

bull Four speed ranges ensure maximum controllability for any task

bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear

bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters

bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed

Axles and Brakes Fully locking front differential axles are optional and can be engaged at full torque on the go with a button on the joystick Limited slip

differentials are also optional on the rear Brake system includes independent service brakes on front and rear axles and a spring

applied electronically activated park brake

6

Hydraulics Smooth efficient operation helps you get the job done faster

Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management

system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full

hydraulic forces at any engine speed

bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the

work cycle is repeatable

bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator

comfort and component life in addition to improved material retention

bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools

bull Optional Ride Control System provides an even smoother ride and excellent material retention

bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency

for multi-function operation

7

Work Tools Do more jobs with one machine

The Right Tool for the Job An extensive range of work tools and bucket styles are available to make

your Cat Wheel Loader one of the most versatile machines on the job site

Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance

bucket shape with the machinersquos linkage weight lift and tilt capacities

They deliver higher fill factors and better material retention for significant

productivity and fuel efficiency improvements The buckets feature a longer

floor open throat and curved side bars

Additional Buckets bull Light Material bull High Dump

bull Multi Purpose bull Wood Chip

bull Sand and Gravel

Material Handling Work Tools bull Pallet Forks bull Material Handling Arm

bull Construction Forks

Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks

bull Snow Plows bull Side Dump Buckets

bull Brooms bull Grapple Buckets

bull Rakes bull Grading Buckets

bull Log and Lumber Forks

Couplers The Cat Fusion interface provides coupler flexibility without compromise in

breakout force and dump clearance The advanced wedging mechanism

creates a tight rattle-free fit eliminating play and wear for long service life

The open coupler frame design provides excellent line of sight to the work

tool An ISO 23727 coupler interface is also available for use with competitive

work tools

8

Options Customize your machine to meet your needs

Configure the Machine the Way You Want It A variety of options are available on the Cat K Seriestrade Wheel Loaders to suit your specific application needs See your Cat dealer

for more information about the features below and additional options

Coupler Options High Lift Linkage (930K and 938K)

Counterweight Options HID Lights Turbine Precleaner

Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires

3rd and 4th Function Hydraulics

Cold Start Package Semi-Cab

Additional options include bull Differential Lock bull Remote Axle Breathers

bull Secondary Steering bull Power Train Side Guards

bull Steer Cylinder Guards bull Driveshaft Guard

bull Hitch Guards bull Rear Waste Gate

bull Tilt Cylinder Guards bull RESPA Cab Filtration

Product Linktrade

bull Lower Power Train Guard

bull Crankcase Guard

bull Full Coverage Fenders

bull Optional Toolbox

bull Autolube (930K and 938K)

Side Power Train Guard

9

Serviceability Easy service to keep your machine working

All service points are accessible from ground level Three large

service doors can be opened and closed in any order to give full

access to filters and service points Extended service intervals

reduce service time and maximize uptime Additional service

features include

bull Caterpillar exclusive electric fuel priming pump

bull Jump start studs as standard equipment

bull Single plane cooling system with 6 fins per inch coolers

as standard

bull Swing-up air conditioner condenser for easy clean out

bull Product Linktrade ready (standard)

Customer Support Unmatched support makes the difference

Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new

or used machine sales to rental or rebuild options your Cat dealer

can provide an optimal solution to your business needs Unsurpassed

worldwide parts availability trained technicians and customer

support agreements maximize your machine uptime

10

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

2

Experience the Difference

Optimized Parallel Lift Z-bar Linkage Combines the digging effi ciency of a traditional Z-bar with tool carrier capabilities for superior performance and fl exibility

Cab and Controls Large spacious cab features excellent visibility to the front and rear extremely low sound levels and low-effort ergonomic joystick controls so you can concentrate on your work In cab adjustments are easy with intuitive controls and an easy to read optional display

Intelligent Power Management A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb groundspeed control for fast digging cycles and the fl exibility to effi ciently perform a multitude of tasks

Powerful Predictable Hydraulics The system senses demand and adjusts fl ow and pressure to match Working with buckets forks and other work tools has never been more effi cient

Work Tools A new line of optimized Performance Series buckets pallet and construction forks as well as a wide range of work tools are available in a Pin-on Fusiontrade coupler or ISO 23727 coupler interface

Serviceability Daily service points are easily accessible from ground level Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner

Contents Parallel Lift Loader Linkage 4

Industry Leading Operator Station 5

Power Train 6

Hydraulics 7

Work Tools 8

Options 9

Serviceability and Customer Support 10

Wheel Loader Specifications 11

Bucket Specifications 18

Sand and Gravel Bucket Specifications 27

Operating Specifications 28

Supplemental Specifications 32

Standard Equipment 33

Optional Equipment34

3

The Cat 924K 930K and 938K Wheel Loaders set a new standard for productivity fuel efficiency and comfort Extremely low sound levels large spacious cab and intuitive controls keep you working comfortably all day long The new optimized Z-bar loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier Experience the new industry benchmark

Parallel Lift Loader Linkage Optimized Z-bar linkage delivers enhanced visibility with maximum productivity

Optimized Z-bar Linkage The new optimized patent-pending Z-bar linkage

combines the digging efficiency of a traditional Z-bar

with tool carrier capabilities for great performance

and versatility

bull Parallel lift and high tilt forces throughout the

working range help you safely and confidently

handle loads with precise control

bull Linkage features excellent visibility to the bucket

cutting edge and fork tips

bull High Lift versions are also available on the 930K

and 938K

4

Industry Leading Operator Station Superior visibility ergonomics and comfort

Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab

bull Extremely low sound levels

bull Superior visibility to the work tool due to wide curved windshield redesigned Z-bar linkage

lines routing and work tool design

bull Automatic temperature control

bull Seat-mounted ergonomic joystick for lift and tilt functions Joystick includes integrated ForwardNeutral

Reverse switch and optional differential lock trigger third and fourth function auxiliary hydraulics

bull Easy access to the cab with ergonomically placed grab rails walk-up steps and large platform

Easy to Use Instrument Panel and Display An optional secondary display provides easy access to vital machine parameters and works in

conjunction with the standard soft touch panel to allow real time adjustments

bull Machine information and diagnostics at a glance

bull Real time and historic fuel usage

bull Backup camera display

bull Help button plus 22 language capability

bull Adjustment of functions such as creep third function flow throttle and rimpull

5

Power Train Maximum machine power reduced fuel consumption

Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the

machine working at peak efficiency

Engine The Cat C71 ACERT engine provides cleaner quieter operation while delivering superior performance and durability The engine meets

US EPA Tier 3 and EU Stage IIIA emission requirements Maximum engine speed is now 1800 rpm for reduced fuel consumption and

lower sound levels The engine also features

bull Class-leading fuel efficiency significantly reducing owning and operating costs

bull Configurable auto idle shut down feature as standard equipment

Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb

groundspeed control for a multitude of tasks

bull Four speed ranges ensure maximum controllability for any task

bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear

bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters

bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed

Axles and Brakes Fully locking front differential axles are optional and can be engaged at full torque on the go with a button on the joystick Limited slip

differentials are also optional on the rear Brake system includes independent service brakes on front and rear axles and a spring

applied electronically activated park brake

6

Hydraulics Smooth efficient operation helps you get the job done faster

Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management

system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full

hydraulic forces at any engine speed

bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the

work cycle is repeatable

bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator

comfort and component life in addition to improved material retention

bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools

bull Optional Ride Control System provides an even smoother ride and excellent material retention

bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency

for multi-function operation

7

Work Tools Do more jobs with one machine

The Right Tool for the Job An extensive range of work tools and bucket styles are available to make

your Cat Wheel Loader one of the most versatile machines on the job site

Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance

bucket shape with the machinersquos linkage weight lift and tilt capacities

They deliver higher fill factors and better material retention for significant

productivity and fuel efficiency improvements The buckets feature a longer

floor open throat and curved side bars

Additional Buckets bull Light Material bull High Dump

bull Multi Purpose bull Wood Chip

bull Sand and Gravel

Material Handling Work Tools bull Pallet Forks bull Material Handling Arm

bull Construction Forks

Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks

bull Snow Plows bull Side Dump Buckets

bull Brooms bull Grapple Buckets

bull Rakes bull Grading Buckets

bull Log and Lumber Forks

Couplers The Cat Fusion interface provides coupler flexibility without compromise in

breakout force and dump clearance The advanced wedging mechanism

creates a tight rattle-free fit eliminating play and wear for long service life

The open coupler frame design provides excellent line of sight to the work

tool An ISO 23727 coupler interface is also available for use with competitive

work tools

8

Options Customize your machine to meet your needs

Configure the Machine the Way You Want It A variety of options are available on the Cat K Seriestrade Wheel Loaders to suit your specific application needs See your Cat dealer

for more information about the features below and additional options

Coupler Options High Lift Linkage (930K and 938K)

Counterweight Options HID Lights Turbine Precleaner

Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires

3rd and 4th Function Hydraulics

Cold Start Package Semi-Cab

Additional options include bull Differential Lock bull Remote Axle Breathers

bull Secondary Steering bull Power Train Side Guards

bull Steer Cylinder Guards bull Driveshaft Guard

bull Hitch Guards bull Rear Waste Gate

bull Tilt Cylinder Guards bull RESPA Cab Filtration

Product Linktrade

bull Lower Power Train Guard

bull Crankcase Guard

bull Full Coverage Fenders

bull Optional Toolbox

bull Autolube (930K and 938K)

Side Power Train Guard

9

Serviceability Easy service to keep your machine working

All service points are accessible from ground level Three large

service doors can be opened and closed in any order to give full

access to filters and service points Extended service intervals

reduce service time and maximize uptime Additional service

features include

bull Caterpillar exclusive electric fuel priming pump

bull Jump start studs as standard equipment

bull Single plane cooling system with 6 fins per inch coolers

as standard

bull Swing-up air conditioner condenser for easy clean out

bull Product Linktrade ready (standard)

Customer Support Unmatched support makes the difference

Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new

or used machine sales to rental or rebuild options your Cat dealer

can provide an optimal solution to your business needs Unsurpassed

worldwide parts availability trained technicians and customer

support agreements maximize your machine uptime

10

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

3

The Cat 924K 930K and 938K Wheel Loaders set a new standard for productivity fuel efficiency and comfort Extremely low sound levels large spacious cab and intuitive controls keep you working comfortably all day long The new optimized Z-bar loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier Experience the new industry benchmark

Parallel Lift Loader Linkage Optimized Z-bar linkage delivers enhanced visibility with maximum productivity

Optimized Z-bar Linkage The new optimized patent-pending Z-bar linkage

combines the digging efficiency of a traditional Z-bar

with tool carrier capabilities for great performance

and versatility

bull Parallel lift and high tilt forces throughout the

working range help you safely and confidently

handle loads with precise control

bull Linkage features excellent visibility to the bucket

cutting edge and fork tips

bull High Lift versions are also available on the 930K

and 938K

4

Industry Leading Operator Station Superior visibility ergonomics and comfort

Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab

bull Extremely low sound levels

bull Superior visibility to the work tool due to wide curved windshield redesigned Z-bar linkage

lines routing and work tool design

bull Automatic temperature control

bull Seat-mounted ergonomic joystick for lift and tilt functions Joystick includes integrated ForwardNeutral

Reverse switch and optional differential lock trigger third and fourth function auxiliary hydraulics

bull Easy access to the cab with ergonomically placed grab rails walk-up steps and large platform

Easy to Use Instrument Panel and Display An optional secondary display provides easy access to vital machine parameters and works in

conjunction with the standard soft touch panel to allow real time adjustments

bull Machine information and diagnostics at a glance

bull Real time and historic fuel usage

bull Backup camera display

bull Help button plus 22 language capability

bull Adjustment of functions such as creep third function flow throttle and rimpull

5

Power Train Maximum machine power reduced fuel consumption

Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the

machine working at peak efficiency

Engine The Cat C71 ACERT engine provides cleaner quieter operation while delivering superior performance and durability The engine meets

US EPA Tier 3 and EU Stage IIIA emission requirements Maximum engine speed is now 1800 rpm for reduced fuel consumption and

lower sound levels The engine also features

bull Class-leading fuel efficiency significantly reducing owning and operating costs

bull Configurable auto idle shut down feature as standard equipment

Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb

groundspeed control for a multitude of tasks

bull Four speed ranges ensure maximum controllability for any task

bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear

bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters

bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed

Axles and Brakes Fully locking front differential axles are optional and can be engaged at full torque on the go with a button on the joystick Limited slip

differentials are also optional on the rear Brake system includes independent service brakes on front and rear axles and a spring

applied electronically activated park brake

6

Hydraulics Smooth efficient operation helps you get the job done faster

Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management

system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full

hydraulic forces at any engine speed

bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the

work cycle is repeatable

bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator

comfort and component life in addition to improved material retention

bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools

bull Optional Ride Control System provides an even smoother ride and excellent material retention

bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency

for multi-function operation

7

Work Tools Do more jobs with one machine

The Right Tool for the Job An extensive range of work tools and bucket styles are available to make

your Cat Wheel Loader one of the most versatile machines on the job site

Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance

bucket shape with the machinersquos linkage weight lift and tilt capacities

They deliver higher fill factors and better material retention for significant

productivity and fuel efficiency improvements The buckets feature a longer

floor open throat and curved side bars

Additional Buckets bull Light Material bull High Dump

bull Multi Purpose bull Wood Chip

bull Sand and Gravel

Material Handling Work Tools bull Pallet Forks bull Material Handling Arm

bull Construction Forks

Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks

bull Snow Plows bull Side Dump Buckets

bull Brooms bull Grapple Buckets

bull Rakes bull Grading Buckets

bull Log and Lumber Forks

Couplers The Cat Fusion interface provides coupler flexibility without compromise in

breakout force and dump clearance The advanced wedging mechanism

creates a tight rattle-free fit eliminating play and wear for long service life

The open coupler frame design provides excellent line of sight to the work

tool An ISO 23727 coupler interface is also available for use with competitive

work tools

8

Options Customize your machine to meet your needs

Configure the Machine the Way You Want It A variety of options are available on the Cat K Seriestrade Wheel Loaders to suit your specific application needs See your Cat dealer

for more information about the features below and additional options

Coupler Options High Lift Linkage (930K and 938K)

Counterweight Options HID Lights Turbine Precleaner

Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires

3rd and 4th Function Hydraulics

Cold Start Package Semi-Cab

Additional options include bull Differential Lock bull Remote Axle Breathers

bull Secondary Steering bull Power Train Side Guards

bull Steer Cylinder Guards bull Driveshaft Guard

bull Hitch Guards bull Rear Waste Gate

bull Tilt Cylinder Guards bull RESPA Cab Filtration

Product Linktrade

bull Lower Power Train Guard

bull Crankcase Guard

bull Full Coverage Fenders

bull Optional Toolbox

bull Autolube (930K and 938K)

Side Power Train Guard

9

Serviceability Easy service to keep your machine working

All service points are accessible from ground level Three large

service doors can be opened and closed in any order to give full

access to filters and service points Extended service intervals

reduce service time and maximize uptime Additional service

features include

bull Caterpillar exclusive electric fuel priming pump

bull Jump start studs as standard equipment

bull Single plane cooling system with 6 fins per inch coolers

as standard

bull Swing-up air conditioner condenser for easy clean out

bull Product Linktrade ready (standard)

Customer Support Unmatched support makes the difference

Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new

or used machine sales to rental or rebuild options your Cat dealer

can provide an optimal solution to your business needs Unsurpassed

worldwide parts availability trained technicians and customer

support agreements maximize your machine uptime

10

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Parallel Lift Loader Linkage Optimized Z-bar linkage delivers enhanced visibility with maximum productivity

Optimized Z-bar Linkage The new optimized patent-pending Z-bar linkage

combines the digging efficiency of a traditional Z-bar

with tool carrier capabilities for great performance

and versatility

bull Parallel lift and high tilt forces throughout the

working range help you safely and confidently

handle loads with precise control

bull Linkage features excellent visibility to the bucket

cutting edge and fork tips

bull High Lift versions are also available on the 930K

and 938K

4

Industry Leading Operator Station Superior visibility ergonomics and comfort

Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab

bull Extremely low sound levels

bull Superior visibility to the work tool due to wide curved windshield redesigned Z-bar linkage

lines routing and work tool design

bull Automatic temperature control

bull Seat-mounted ergonomic joystick for lift and tilt functions Joystick includes integrated ForwardNeutral

Reverse switch and optional differential lock trigger third and fourth function auxiliary hydraulics

bull Easy access to the cab with ergonomically placed grab rails walk-up steps and large platform

Easy to Use Instrument Panel and Display An optional secondary display provides easy access to vital machine parameters and works in

conjunction with the standard soft touch panel to allow real time adjustments

bull Machine information and diagnostics at a glance

bull Real time and historic fuel usage

bull Backup camera display

bull Help button plus 22 language capability

bull Adjustment of functions such as creep third function flow throttle and rimpull

5

Power Train Maximum machine power reduced fuel consumption

Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the

machine working at peak efficiency

Engine The Cat C71 ACERT engine provides cleaner quieter operation while delivering superior performance and durability The engine meets

US EPA Tier 3 and EU Stage IIIA emission requirements Maximum engine speed is now 1800 rpm for reduced fuel consumption and

lower sound levels The engine also features

bull Class-leading fuel efficiency significantly reducing owning and operating costs

bull Configurable auto idle shut down feature as standard equipment

Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb

groundspeed control for a multitude of tasks

bull Four speed ranges ensure maximum controllability for any task

bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear

bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters

bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed

Axles and Brakes Fully locking front differential axles are optional and can be engaged at full torque on the go with a button on the joystick Limited slip

differentials are also optional on the rear Brake system includes independent service brakes on front and rear axles and a spring

applied electronically activated park brake

6

Hydraulics Smooth efficient operation helps you get the job done faster

Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management

system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full

hydraulic forces at any engine speed

bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the

work cycle is repeatable

bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator

comfort and component life in addition to improved material retention

bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools

bull Optional Ride Control System provides an even smoother ride and excellent material retention

bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency

for multi-function operation

7

Work Tools Do more jobs with one machine

The Right Tool for the Job An extensive range of work tools and bucket styles are available to make

your Cat Wheel Loader one of the most versatile machines on the job site

Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance

bucket shape with the machinersquos linkage weight lift and tilt capacities

They deliver higher fill factors and better material retention for significant

productivity and fuel efficiency improvements The buckets feature a longer

floor open throat and curved side bars

Additional Buckets bull Light Material bull High Dump

bull Multi Purpose bull Wood Chip

bull Sand and Gravel

Material Handling Work Tools bull Pallet Forks bull Material Handling Arm

bull Construction Forks

Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks

bull Snow Plows bull Side Dump Buckets

bull Brooms bull Grapple Buckets

bull Rakes bull Grading Buckets

bull Log and Lumber Forks

Couplers The Cat Fusion interface provides coupler flexibility without compromise in

breakout force and dump clearance The advanced wedging mechanism

creates a tight rattle-free fit eliminating play and wear for long service life

The open coupler frame design provides excellent line of sight to the work

tool An ISO 23727 coupler interface is also available for use with competitive

work tools

8

Options Customize your machine to meet your needs

Configure the Machine the Way You Want It A variety of options are available on the Cat K Seriestrade Wheel Loaders to suit your specific application needs See your Cat dealer

for more information about the features below and additional options

Coupler Options High Lift Linkage (930K and 938K)

Counterweight Options HID Lights Turbine Precleaner

Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires

3rd and 4th Function Hydraulics

Cold Start Package Semi-Cab

Additional options include bull Differential Lock bull Remote Axle Breathers

bull Secondary Steering bull Power Train Side Guards

bull Steer Cylinder Guards bull Driveshaft Guard

bull Hitch Guards bull Rear Waste Gate

bull Tilt Cylinder Guards bull RESPA Cab Filtration

Product Linktrade

bull Lower Power Train Guard

bull Crankcase Guard

bull Full Coverage Fenders

bull Optional Toolbox

bull Autolube (930K and 938K)

Side Power Train Guard

9

Serviceability Easy service to keep your machine working

All service points are accessible from ground level Three large

service doors can be opened and closed in any order to give full

access to filters and service points Extended service intervals

reduce service time and maximize uptime Additional service

features include

bull Caterpillar exclusive electric fuel priming pump

bull Jump start studs as standard equipment

bull Single plane cooling system with 6 fins per inch coolers

as standard

bull Swing-up air conditioner condenser for easy clean out

bull Product Linktrade ready (standard)

Customer Support Unmatched support makes the difference

Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new

or used machine sales to rental or rebuild options your Cat dealer

can provide an optimal solution to your business needs Unsurpassed

worldwide parts availability trained technicians and customer

support agreements maximize your machine uptime

10

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Industry Leading Operator Station Superior visibility ergonomics and comfort

Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab

bull Extremely low sound levels

bull Superior visibility to the work tool due to wide curved windshield redesigned Z-bar linkage

lines routing and work tool design

bull Automatic temperature control

bull Seat-mounted ergonomic joystick for lift and tilt functions Joystick includes integrated ForwardNeutral

Reverse switch and optional differential lock trigger third and fourth function auxiliary hydraulics

bull Easy access to the cab with ergonomically placed grab rails walk-up steps and large platform

Easy to Use Instrument Panel and Display An optional secondary display provides easy access to vital machine parameters and works in

conjunction with the standard soft touch panel to allow real time adjustments

bull Machine information and diagnostics at a glance

bull Real time and historic fuel usage

bull Backup camera display

bull Help button plus 22 language capability

bull Adjustment of functions such as creep third function flow throttle and rimpull

5

Power Train Maximum machine power reduced fuel consumption

Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the

machine working at peak efficiency

Engine The Cat C71 ACERT engine provides cleaner quieter operation while delivering superior performance and durability The engine meets

US EPA Tier 3 and EU Stage IIIA emission requirements Maximum engine speed is now 1800 rpm for reduced fuel consumption and

lower sound levels The engine also features

bull Class-leading fuel efficiency significantly reducing owning and operating costs

bull Configurable auto idle shut down feature as standard equipment

Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb

groundspeed control for a multitude of tasks

bull Four speed ranges ensure maximum controllability for any task

bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear

bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters

bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed

Axles and Brakes Fully locking front differential axles are optional and can be engaged at full torque on the go with a button on the joystick Limited slip

differentials are also optional on the rear Brake system includes independent service brakes on front and rear axles and a spring

applied electronically activated park brake

6

Hydraulics Smooth efficient operation helps you get the job done faster

Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management

system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full

hydraulic forces at any engine speed

bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the

work cycle is repeatable

bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator

comfort and component life in addition to improved material retention

bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools

bull Optional Ride Control System provides an even smoother ride and excellent material retention

bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency

for multi-function operation

7

Work Tools Do more jobs with one machine

The Right Tool for the Job An extensive range of work tools and bucket styles are available to make

your Cat Wheel Loader one of the most versatile machines on the job site

Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance

bucket shape with the machinersquos linkage weight lift and tilt capacities

They deliver higher fill factors and better material retention for significant

productivity and fuel efficiency improvements The buckets feature a longer

floor open throat and curved side bars

Additional Buckets bull Light Material bull High Dump

bull Multi Purpose bull Wood Chip

bull Sand and Gravel

Material Handling Work Tools bull Pallet Forks bull Material Handling Arm

bull Construction Forks

Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks

bull Snow Plows bull Side Dump Buckets

bull Brooms bull Grapple Buckets

bull Rakes bull Grading Buckets

bull Log and Lumber Forks

Couplers The Cat Fusion interface provides coupler flexibility without compromise in

breakout force and dump clearance The advanced wedging mechanism

creates a tight rattle-free fit eliminating play and wear for long service life

The open coupler frame design provides excellent line of sight to the work

tool An ISO 23727 coupler interface is also available for use with competitive

work tools

8

Options Customize your machine to meet your needs

Configure the Machine the Way You Want It A variety of options are available on the Cat K Seriestrade Wheel Loaders to suit your specific application needs See your Cat dealer

for more information about the features below and additional options

Coupler Options High Lift Linkage (930K and 938K)

Counterweight Options HID Lights Turbine Precleaner

Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires

3rd and 4th Function Hydraulics

Cold Start Package Semi-Cab

Additional options include bull Differential Lock bull Remote Axle Breathers

bull Secondary Steering bull Power Train Side Guards

bull Steer Cylinder Guards bull Driveshaft Guard

bull Hitch Guards bull Rear Waste Gate

bull Tilt Cylinder Guards bull RESPA Cab Filtration

Product Linktrade

bull Lower Power Train Guard

bull Crankcase Guard

bull Full Coverage Fenders

bull Optional Toolbox

bull Autolube (930K and 938K)

Side Power Train Guard

9

Serviceability Easy service to keep your machine working

All service points are accessible from ground level Three large

service doors can be opened and closed in any order to give full

access to filters and service points Extended service intervals

reduce service time and maximize uptime Additional service

features include

bull Caterpillar exclusive electric fuel priming pump

bull Jump start studs as standard equipment

bull Single plane cooling system with 6 fins per inch coolers

as standard

bull Swing-up air conditioner condenser for easy clean out

bull Product Linktrade ready (standard)

Customer Support Unmatched support makes the difference

Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new

or used machine sales to rental or rebuild options your Cat dealer

can provide an optimal solution to your business needs Unsurpassed

worldwide parts availability trained technicians and customer

support agreements maximize your machine uptime

10

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Power Train Maximum machine power reduced fuel consumption

Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the

machine working at peak efficiency

Engine The Cat C71 ACERT engine provides cleaner quieter operation while delivering superior performance and durability The engine meets

US EPA Tier 3 and EU Stage IIIA emission requirements Maximum engine speed is now 1800 rpm for reduced fuel consumption and

lower sound levels The engine also features

bull Class-leading fuel efficiency significantly reducing owning and operating costs

bull Configurable auto idle shut down feature as standard equipment

Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb

groundspeed control for a multitude of tasks

bull Four speed ranges ensure maximum controllability for any task

bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear

bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters

bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed

Axles and Brakes Fully locking front differential axles are optional and can be engaged at full torque on the go with a button on the joystick Limited slip

differentials are also optional on the rear Brake system includes independent service brakes on front and rear axles and a spring

applied electronically activated park brake

6

Hydraulics Smooth efficient operation helps you get the job done faster

Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management

system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full

hydraulic forces at any engine speed

bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the

work cycle is repeatable

bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator

comfort and component life in addition to improved material retention

bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools

bull Optional Ride Control System provides an even smoother ride and excellent material retention

bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency

for multi-function operation

7

Work Tools Do more jobs with one machine

The Right Tool for the Job An extensive range of work tools and bucket styles are available to make

your Cat Wheel Loader one of the most versatile machines on the job site

Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance

bucket shape with the machinersquos linkage weight lift and tilt capacities

They deliver higher fill factors and better material retention for significant

productivity and fuel efficiency improvements The buckets feature a longer

floor open throat and curved side bars

Additional Buckets bull Light Material bull High Dump

bull Multi Purpose bull Wood Chip

bull Sand and Gravel

Material Handling Work Tools bull Pallet Forks bull Material Handling Arm

bull Construction Forks

Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks

bull Snow Plows bull Side Dump Buckets

bull Brooms bull Grapple Buckets

bull Rakes bull Grading Buckets

bull Log and Lumber Forks

Couplers The Cat Fusion interface provides coupler flexibility without compromise in

breakout force and dump clearance The advanced wedging mechanism

creates a tight rattle-free fit eliminating play and wear for long service life

The open coupler frame design provides excellent line of sight to the work

tool An ISO 23727 coupler interface is also available for use with competitive

work tools

8

Options Customize your machine to meet your needs

Configure the Machine the Way You Want It A variety of options are available on the Cat K Seriestrade Wheel Loaders to suit your specific application needs See your Cat dealer

for more information about the features below and additional options

Coupler Options High Lift Linkage (930K and 938K)

Counterweight Options HID Lights Turbine Precleaner

Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires

3rd and 4th Function Hydraulics

Cold Start Package Semi-Cab

Additional options include bull Differential Lock bull Remote Axle Breathers

bull Secondary Steering bull Power Train Side Guards

bull Steer Cylinder Guards bull Driveshaft Guard

bull Hitch Guards bull Rear Waste Gate

bull Tilt Cylinder Guards bull RESPA Cab Filtration

Product Linktrade

bull Lower Power Train Guard

bull Crankcase Guard

bull Full Coverage Fenders

bull Optional Toolbox

bull Autolube (930K and 938K)

Side Power Train Guard

9

Serviceability Easy service to keep your machine working

All service points are accessible from ground level Three large

service doors can be opened and closed in any order to give full

access to filters and service points Extended service intervals

reduce service time and maximize uptime Additional service

features include

bull Caterpillar exclusive electric fuel priming pump

bull Jump start studs as standard equipment

bull Single plane cooling system with 6 fins per inch coolers

as standard

bull Swing-up air conditioner condenser for easy clean out

bull Product Linktrade ready (standard)

Customer Support Unmatched support makes the difference

Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new

or used machine sales to rental or rebuild options your Cat dealer

can provide an optimal solution to your business needs Unsurpassed

worldwide parts availability trained technicians and customer

support agreements maximize your machine uptime

10

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Hydraulics Smooth efficient operation helps you get the job done faster

Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management

system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full

hydraulic forces at any engine speed

bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the

work cycle is repeatable

bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator

comfort and component life in addition to improved material retention

bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools

bull Optional Ride Control System provides an even smoother ride and excellent material retention

bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency

for multi-function operation

7

Work Tools Do more jobs with one machine

The Right Tool for the Job An extensive range of work tools and bucket styles are available to make

your Cat Wheel Loader one of the most versatile machines on the job site

Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance

bucket shape with the machinersquos linkage weight lift and tilt capacities

They deliver higher fill factors and better material retention for significant

productivity and fuel efficiency improvements The buckets feature a longer

floor open throat and curved side bars

Additional Buckets bull Light Material bull High Dump

bull Multi Purpose bull Wood Chip

bull Sand and Gravel

Material Handling Work Tools bull Pallet Forks bull Material Handling Arm

bull Construction Forks

Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks

bull Snow Plows bull Side Dump Buckets

bull Brooms bull Grapple Buckets

bull Rakes bull Grading Buckets

bull Log and Lumber Forks

Couplers The Cat Fusion interface provides coupler flexibility without compromise in

breakout force and dump clearance The advanced wedging mechanism

creates a tight rattle-free fit eliminating play and wear for long service life

The open coupler frame design provides excellent line of sight to the work

tool An ISO 23727 coupler interface is also available for use with competitive

work tools

8

Options Customize your machine to meet your needs

Configure the Machine the Way You Want It A variety of options are available on the Cat K Seriestrade Wheel Loaders to suit your specific application needs See your Cat dealer

for more information about the features below and additional options

Coupler Options High Lift Linkage (930K and 938K)

Counterweight Options HID Lights Turbine Precleaner

Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires

3rd and 4th Function Hydraulics

Cold Start Package Semi-Cab

Additional options include bull Differential Lock bull Remote Axle Breathers

bull Secondary Steering bull Power Train Side Guards

bull Steer Cylinder Guards bull Driveshaft Guard

bull Hitch Guards bull Rear Waste Gate

bull Tilt Cylinder Guards bull RESPA Cab Filtration

Product Linktrade

bull Lower Power Train Guard

bull Crankcase Guard

bull Full Coverage Fenders

bull Optional Toolbox

bull Autolube (930K and 938K)

Side Power Train Guard

9

Serviceability Easy service to keep your machine working

All service points are accessible from ground level Three large

service doors can be opened and closed in any order to give full

access to filters and service points Extended service intervals

reduce service time and maximize uptime Additional service

features include

bull Caterpillar exclusive electric fuel priming pump

bull Jump start studs as standard equipment

bull Single plane cooling system with 6 fins per inch coolers

as standard

bull Swing-up air conditioner condenser for easy clean out

bull Product Linktrade ready (standard)

Customer Support Unmatched support makes the difference

Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new

or used machine sales to rental or rebuild options your Cat dealer

can provide an optimal solution to your business needs Unsurpassed

worldwide parts availability trained technicians and customer

support agreements maximize your machine uptime

10

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Work Tools Do more jobs with one machine

The Right Tool for the Job An extensive range of work tools and bucket styles are available to make

your Cat Wheel Loader one of the most versatile machines on the job site

Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance

bucket shape with the machinersquos linkage weight lift and tilt capacities

They deliver higher fill factors and better material retention for significant

productivity and fuel efficiency improvements The buckets feature a longer

floor open throat and curved side bars

Additional Buckets bull Light Material bull High Dump

bull Multi Purpose bull Wood Chip

bull Sand and Gravel

Material Handling Work Tools bull Pallet Forks bull Material Handling Arm

bull Construction Forks

Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks

bull Snow Plows bull Side Dump Buckets

bull Brooms bull Grapple Buckets

bull Rakes bull Grading Buckets

bull Log and Lumber Forks

Couplers The Cat Fusion interface provides coupler flexibility without compromise in

breakout force and dump clearance The advanced wedging mechanism

creates a tight rattle-free fit eliminating play and wear for long service life

The open coupler frame design provides excellent line of sight to the work

tool An ISO 23727 coupler interface is also available for use with competitive

work tools

8

Options Customize your machine to meet your needs

Configure the Machine the Way You Want It A variety of options are available on the Cat K Seriestrade Wheel Loaders to suit your specific application needs See your Cat dealer

for more information about the features below and additional options

Coupler Options High Lift Linkage (930K and 938K)

Counterweight Options HID Lights Turbine Precleaner

Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires

3rd and 4th Function Hydraulics

Cold Start Package Semi-Cab

Additional options include bull Differential Lock bull Remote Axle Breathers

bull Secondary Steering bull Power Train Side Guards

bull Steer Cylinder Guards bull Driveshaft Guard

bull Hitch Guards bull Rear Waste Gate

bull Tilt Cylinder Guards bull RESPA Cab Filtration

Product Linktrade

bull Lower Power Train Guard

bull Crankcase Guard

bull Full Coverage Fenders

bull Optional Toolbox

bull Autolube (930K and 938K)

Side Power Train Guard

9

Serviceability Easy service to keep your machine working

All service points are accessible from ground level Three large

service doors can be opened and closed in any order to give full

access to filters and service points Extended service intervals

reduce service time and maximize uptime Additional service

features include

bull Caterpillar exclusive electric fuel priming pump

bull Jump start studs as standard equipment

bull Single plane cooling system with 6 fins per inch coolers

as standard

bull Swing-up air conditioner condenser for easy clean out

bull Product Linktrade ready (standard)

Customer Support Unmatched support makes the difference

Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new

or used machine sales to rental or rebuild options your Cat dealer

can provide an optimal solution to your business needs Unsurpassed

worldwide parts availability trained technicians and customer

support agreements maximize your machine uptime

10

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Options Customize your machine to meet your needs

Configure the Machine the Way You Want It A variety of options are available on the Cat K Seriestrade Wheel Loaders to suit your specific application needs See your Cat dealer

for more information about the features below and additional options

Coupler Options High Lift Linkage (930K and 938K)

Counterweight Options HID Lights Turbine Precleaner

Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires

3rd and 4th Function Hydraulics

Cold Start Package Semi-Cab

Additional options include bull Differential Lock bull Remote Axle Breathers

bull Secondary Steering bull Power Train Side Guards

bull Steer Cylinder Guards bull Driveshaft Guard

bull Hitch Guards bull Rear Waste Gate

bull Tilt Cylinder Guards bull RESPA Cab Filtration

Product Linktrade

bull Lower Power Train Guard

bull Crankcase Guard

bull Full Coverage Fenders

bull Optional Toolbox

bull Autolube (930K and 938K)

Side Power Train Guard

9

Serviceability Easy service to keep your machine working

All service points are accessible from ground level Three large

service doors can be opened and closed in any order to give full

access to filters and service points Extended service intervals

reduce service time and maximize uptime Additional service

features include

bull Caterpillar exclusive electric fuel priming pump

bull Jump start studs as standard equipment

bull Single plane cooling system with 6 fins per inch coolers

as standard

bull Swing-up air conditioner condenser for easy clean out

bull Product Linktrade ready (standard)

Customer Support Unmatched support makes the difference

Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new

or used machine sales to rental or rebuild options your Cat dealer

can provide an optimal solution to your business needs Unsurpassed

worldwide parts availability trained technicians and customer

support agreements maximize your machine uptime

10

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Serviceability Easy service to keep your machine working

All service points are accessible from ground level Three large

service doors can be opened and closed in any order to give full

access to filters and service points Extended service intervals

reduce service time and maximize uptime Additional service

features include

bull Caterpillar exclusive electric fuel priming pump

bull Jump start studs as standard equipment

bull Single plane cooling system with 6 fins per inch coolers

as standard

bull Swing-up air conditioner condenser for easy clean out

bull Product Linktrade ready (standard)

Customer Support Unmatched support makes the difference

Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new

or used machine sales to rental or rebuild options your Cat dealer

can provide an optimal solution to your business needs Unsurpassed

worldwide parts availability trained technicians and customer

support agreements maximize your machine uptime

10

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Engine

924K 930K 938K Wheel Loader Specifications

924K 930K 938K

Engine Model Cat C71 ACERT Cat C71 ACERT Cat C71 ACERT

Maximum Gross Power

ISO 14396 (DIN) 105 kW 143 hp 119 kW 162 hp 140 kW 190 hp

ISO 14396 105 kW 141 hp 119 kW 160 hp 140 kW 188 hp

Rated Net Power 1800 rpm

SAE J1349 101 kW 135 hp 115 kW 154 hp 136 kW 182 hp

ISO 9249 (1977)EEC 801269 102 kW 137 hp 116 kW 156 hp 137 kW 184 hp

ISO 9249 (DIN) 102 kW 139 hp 116 kW 158 hp 137 kW 186 hp

Maximum Gross Torque

ISO 14396 725 Nmiddotm 535 lbf-ft 787 Nmiddotm 580 lbf-ft 912 Nmiddotm 673 lbf-ft

Maximum Net Torque

SAE J1349 700 Nmiddotm 516 lbf-ft 750 Nmiddotm 553 lbf-ft 874 Nmiddotm 645 lbf-ft

ISO 9249 (1977)EEC 801269 708 Nmiddotm 522 lbf-ft 758 Nmiddotm 559 lbf-ft 883 Nmiddotm 651 lbf-ft

Displacement 70 L 428 in3 70 L 428 in3 70 L 428 in3

Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in

Stroke 135 mm 5 in 135 mm 5 in 135 mm 5 in

bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter

and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C71 engine meets US EPA Tier 3 (EU Stage IIIA) emission requirements

Engine Power and Torque

924K 930K 938K

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

600

500

400

300

800

900

700

600

500

400

800 1000 1200 1400 1600 1800 rpm

140

120

100

80

60

40

160

120

80

Power Torque

lbf-ft Nmiddotm kW hp

11

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

924K 930K 938K Wheel Loader Specifications

Buckets

bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention

924K 930K 938K

General Purpose 17-25 m3 22-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3

Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3

Weights

924K 930K 938K

Operating weight ndash Standard Lift 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Operating weight ndash High Lift NA NA 13 382 kg 29502 lb 15 395 kg 33940 lb

bull Specifications shown are for a machine configured with general purpose pin on bucket bolt-on cutting edges optional counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) pin on bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) pin on bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) pin on bucket with bolt-on cutting edge

Steering

bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders

924K 930K 938K

Steering articulation angle each direction 40deg 40deg 40deg

Steering cylinder double acting

Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in

Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in

Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in

Maximum flow ndash steering pump 125 Lmin 33 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin

Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi

Maximum steering torque

0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft

40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft

Steering cycle times (full left to full right)

800 rpm pump flow limited 28 seconds 28 seconds 31 seconds

1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds

Number of steering wheel turns

Full left to full right or full right to full left 35 turns 35 turns 33 turns

12

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Loader Hydraulic System

bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder

bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped

bull 4th function flow is fi xed

924K 930K 938K

Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin

4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin

Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump

Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

3rd function maximum working pressure

3rd function relief pressure

26 000 kPa

28 000 kPa

3771 psi

4061 psi

25 000 kPa

28 000 kPa

3626 psi

4061 psi

28 000 kPa

30 000 kPa

4061 psi

4351 psi

4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi

4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi

Lift cylinder double acting

Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in

Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in

Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in

Tilt cylinder double acting

Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in

Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in

Stroke 516 mm 203 in 555 mm 219 in 555 mm 219 in

Hydraulic cycle times (1800 rpm)

Raise (ground level to maximum lift) 54 seconds 51 seconds 55 seconds

Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds

Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds

Total cycle time 95 seconds 93 seconds 97 seconds

Service Refi ll Capacities

924K 930K 938K

Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal

Cooling system 32 L 85 gal 32 L 85 gal 32 L 85 gal

Engine crankcase 195 L 52 gal 195 L 52 gal 195 L 52 gal

Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal

Axles

Front 21 L 55 gal 26 L 69 gal 35 L 92 gal

Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal

Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal

Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal

13

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

924K 930K 938K Wheel Loader Specifications

Transmission

Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)

924K 930K 938K

Forward

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Reverse

Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph

Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph

Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph

Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph

Power Train

bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency

Optional differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K

924K 930K 938K

Front axle Fixed Fixed Fixed

Traction aid Open differential (standard) Open differential (standard) Open differential (standard) Locking differential Locking differential Locking differential (optional) (optional) (optional)

Rear axle Oscillating Oscillating Oscillating

Oscillation with 175 tires plusmn 13 degrees ndash ndash

Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees

Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional

Brakes

Service brakes Inboard wet disc Inboard wet disc Outboard wet disc

Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released

14

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Tires

924K 930K 938K

175 R25 radial (L-2) Yes

175 R25 radial (L-3) Yes

175 R25 radial (L-5) Yes

205-25 12PR (L-2) Yes Yes Yes

205-25 12PR (L-3) Yes Yes Yes

205-25 16PR (L-5) Yes Yes Yes

205 R25 radial (L-2) Yes Yes Yes

205 R25 radial (L-3) Yes Yes Yes

205 R25 radial (L-5) Yes Yes Yes

55065 R25 radial (L-3) Yes

60065 R25 radial (L-3) Yes

65065 R25 radial (L-3) Yes

SkidderAgriculture Yes Yes Yes

Flexports Gen II Yes Yes Yes

Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model

Cab

bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard bull Semi-cab option is available bull The typical dynamic operator sound pressure level is 71 dB(A) when ISO 63962008 is

used to measure the value for an enclosed cab The measurement was conducted at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds The cab was properly installed and maintained The measurement was conducted with the cab doors and the cab windows closed The cab was properly installed and maintained

The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds

Operating Specifi cations

924K 930K 938K

Tipping load ndash straight (ISO 14397-1) 8732 kg 19252 lb 9908 kg 21844 lb 11 385 kg 25100 lb

Tipping load ndash full turn (ISO 14397-1) 7488 kg 16508 lb 8477 kg 18689 lb 9698 kg 21380 lb

Clearance full lift and 45deg dump 2772 mm 91 2855 mm 94 2869 mm 95

Reach full lift and 45deg dump 1016 mm 34 1033 mm 35 1108 mm 38

Steering articulation angle each direction 40deg 40deg 40deg

15

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

924K 930K 938K Wheel Loader Specifications

Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets

2

1

6

8

16

9 11

12 13

10 14

7

5

23

24

25

15 4 26 3

19

21

22

20

18

27

17

Standard Lift

924K 930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 397 mm 13 286 mm 13

5 Length overall 7374 mm 242 7488 mm 246 7604 mm 2411

6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 2857 mm 94 2855 mm 94 2869 mm 94

10 Clearance load over height 3308 mm 1010 3331 mm 1011 3354 mm 110

11 Clearance level bucket 3526 mm 116 3580 mm 118 3642 mm 1111

12 Height bucket pin 3853 mm 127 3907 mm 129 3969 mm 130

13 Height overall 4997 mm 164 5122 mm 169 5242 mm 172

14 Reach bucket at 45deg 950 mm 31 1033 mm 34 1108 mm 37

15 Carry height bucket pin 447 mm 15 458 mm 16 467 mm 16

16 Dig depth 100 mm 39 100 mm 39 100 mm 39

17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69

19 Turning radius over bucket 5903 mm 194 5933 mm 195 6117 mm 200

20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 54deg 54deg

24 Dump angle at full lift 50deg 49deg 49deg

25 Rack angle at carry 43deg 45deg 45deg

26 Departure angle 33deg 33deg 33deg

27 Articulation angle 40deg 40deg 40deg

Operating weight 11 550 kg 25464 lb 13 135 kg 28958 lb 15 146 kg 33391 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

16

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Dimensions with Bucket

High Lift

930K 938K

1 Height ground to cab 3340 mm 1011 3340 mm 1011

2 Height ground to beacon 3669 mm 120 3669 mm 120

3 Height ground axle center 685 mm 22 685 mm 22

4 Height ground clearance 397 mm 13 386 mm 13

5 Length overall 8282 mm 272 8344 mm 274

6 Length rear axle to bumper 1993 mm 66 1968 mm 65

7 Length hitch to front axle 1500 mm 411 1525 mm 50

8 Length wheel base 3000 mm 910 3050 mm 100

9 Clearance bucket at 45deg 3448 mm 113 3450 mm 113

10 Clearance load over height 3540 mm 117 3561 mm 118

11 Clearance level bucket 4173 mm 138 4223 mm 1310

12 Height bucket pin 4500 mm 149 4550 mm 1411

13 Height overall 5715 mm 188 5823 mm 191

14 Reach bucket at 45deg 1353 mm 45 1374 mm 46

15 Carry height bucket pin 692 mm 23 686 mm 22

16 Dig depth 135 mm 53 135 mm 53

17 Width bucket 2550 mm 84 2750 mm 90

18 Width tread center 1930 mm 63 2065 mm 69

19 Turning radius over bucket 6315 mm 208 6472 mm 212

20 Width over tires 2540 mm 84 2675 mm 89

21 Turning radius outside of tires 5402 mm 178 5537 mm 181

22 Turning radius inside of tires 2851 mm 94 2852 mm 94

23 Rack angle at full lift 53deg 53deg

24 Dump angle at full lift 48deg 47deg

25 Rack angle at carry 51deg 50deg

26 Departure angle 33deg 33deg

27 Articulation angle 40deg 40deg

Operating weight 13 382 kg 29502 lb 15 395 kg 33940 lb

Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose pin on bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

Supplemental Operating Data ndash Tires

924K 930K 938K

205-25 12 PR 175 R25 (L-2) 205-25 16 PR 205R25 (L-5) 65065 R25 205 L-5

mm in mm in mm in mm in mm in mm in

Vertical heights ndash22 ndash09 ndash96 ndash38 ndash25 ndash21 +15 +06 ndash35 ndash14 +15 +06

Reach bucket at 45deg ndash6 ndash02 +73 +29 ndash3 ndash01 ndash21 ndash08 ndash5 ndash02 ndash22 ndash08

Width over tires ndash38 ndash15 +0 +0 +38 +15 +0 +0 +121 +48 +65 +26

Turning radius outside of tires ndash11 ndash04 ndash45 ndash18 +42 +17 +1 +0 +53 +21 +61 +24

Turning radius inside of tires ndash11 ndash04 +35 +14 +0 +0 +0 +0 ndash61 ndash24 ndash33 ndash13

kg lb kg lb kg lb kg lb kg lb kg lb

Tipping load ndash straight ndash190 ndash419 ndash217 ndash478 ndash166 ndash366 +444 +979 +329 +725 +441 +972

Tipping load ndash full turn ndash164 ndash362 ndash187 ndash412 ndash144 ndash317 +384 +847 +285 +628 +381 +840

Operating weight ndash282 ndash622 ndash40 ndash88 ndash254 ndash560 +678 +1495 +506 +1115 +678 +1495

17

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Bucket Specifications

924K Operating Specifications with Buckets

17 22

13 17

2550 84

2311 3936

2915 96

882 210

1440 48

2142 70

100 39

7284 2310

5002 164

5297 174

9153 20179

9535 21021

7858 17324

8360 18431

12 273 27057

11 966 26381

General Purpose

19 25

17 22

2550 84

1948 3262

2830 93

982 32

1499 411

2273 75

100 39

7416 243

5022 165

5916 194

8667 19107

9028 19903

7401 16316

7874 17359

9893 21810

12 361 27251

Pin On Fusion

Rated capacity m3 19 21 21 23 yd3 25 27 27 30

Struck capacity m3 17 19 19 21 yd3 22 25 25 27

Width bucket mm 2550 2550 2550 2550 ftin 84 84 84 84

Nominal material density 100 fill factor kgm3 2043 1835 1744 1576 lbyd3 3423 3146 2989 2663

Clearance full lift 45deg dump mm 2857 2801 2773 2725 ftin 94 92 91 811

Reach full lift 45deg dump mm 950 990 1022 1059 ftin 31 32 34 35

Reach 2130 mm (70) clearance 45deg dump mm 1480 1492 1509 1520 ftin 410 410 411 411

Reach level arm level bucket mm 2231 2303 2345 2408 ftin 73 76 78 710

Dig depth mm 100 100 100 100 in 39 39 39 39

Length overall mm 7374 7446 7588 7551 ftin 242 245 2410 249

Height overall mm 4997 5068 5093 5151 ftin 164 167 168 1610

Turning radius bucket at carry mm 5903 5925 5938 5957 ftin 194 195 195 196

Tipping load ndash straight ISO 14397-1 kg 9053 8990 8583 8503 lb 19958 19820 18922 18746

Tipping load ndash straight rigid tire kg 9430 9364 8940 8857 lb 20790 20644 19709 19526

Tipping load ndash full turn ISO 14397-1 kg 7765 7708 7323 7250 lb 17119 16993 16144 15984

Tipping load ndash full turn rigid tire kg 8260 8199 7791 7713 lb 18210 18076 17176 17004

Breakout force kg 10 342 9645 9238 8725 lb 22800 21264 20366 19235

Operating weight kg 12 019 12 038 12 405 12 443 lb 26497 28539 27348 27432

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

ISO 23727

21 23 27 30

20 22 26 29

2550 2550 84 84

1676 1515 2874 2560

2693 2643 810 88

1126 1162 38 39

1568 1575 51 51

2476 2539 81 83

93 93 37 37

7613 7676 2411 252

5182 5240 170 172

5959 5980 196 197

8252 8174 18192 18019

8596 8514 18950 18770

7040 6968 15521 15362

7490 7413 16512 16343

8174 7756 18020 17098

12 352 12 390 27231 27315

18

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

924K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

Pin On

35 46

33 43

2750 90

1028 1723

2575 85

1094 37

1463 49

2556 84

100 39

7699 253

5229 171

6094 1911

8442 18611

8794 19387

7194 15860

7653 16872

7626 16812

12 418 27377

Light Material

42 55

40 52

2750 90

827 1391

2455 80

1214 311

1499 411

2726 811

100 39

7869 259

5390 178

6148 202

8172 18016

8513 18768

6945 15311

7388 16288

6660 14683

12 555 27679

35 46

33 43

2750 90

977 1638

2545 84

1124 38

1473 49

2598 86

100 39

7741 254

5254 172

6107 200

8064 17778

8400 18519

6836 15071

7273 16034

7439 16400

12 768 28149

Fusion

42 55

40 52

2750 90

785 1321

2425 711

1244 40

1506 411

2768 90

100 39

7911 2511

5417 179

6163 202

7799 17193

8124 17910

6593 14535

7013 15461

6433 14182

12 908 28457

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

19

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Bucket Specifications

924K Bucket Selection Table

kgm3 1750 1825 1900 1975 2050 2125 2200 2275 23501450 1525 1600 1675

2443 2570

114

2696

115

109

2822

110

104 109 103 99 94

Bucket Fill Factor lbyd3 2949 3075 3202 3328 3454 3581 3707 3833 3960

m3 yd3

17 22 113 109 105 102 98 100 96Pin On 19 25 112 108 103

Gen

eral

Pur

pose 101 97

99 95 100 96

650 700 750 800 850 900 950 1000 1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938 2022 2106

114 108 103 98 110 103 97

115 109 103 98 112 105 98

21 27 105 19 25 111 107 103

Fusion 21 27 23 30

kgm3

lbyd3

1050 1100 1150 1200 1250Bucket Fill Factor

m3 yd3

35 46Pin On

42 55 35 46

Fusion 42 55

Ligh

tM

ater

ial

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

924K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

924K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash148 kg ndash326 lb ndash142 kg ndash313 lb

Tipping load ndash full turn ndash145 kg ndash320 lb ndash139 kg ndash306 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

20

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

930K Operating Specifications with Buckets

General Purpose

21 27

19 25

2550 84

1925 3299

2828 93

1064 35

1578 52

2392 710

100 39

7530 248

5147 1610

5945 196

9490 20922

9886 21795

8083 17820

8599 18958

12 366 27262

13 501 29765

Pin On Fusion

Rated capacity m3 23 25 23 25 yd3 30 33 30 33

21 27

19 25

2550 84

2018 3460

2855 94

1033 34

1560 51

2350 78

100 39

7488 246

5122 169

5933 195

9908 21843

10 321 22864

8477 18689

9018 19881

12 891 28420

13 135 28958

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

21 23 27 30

2550 2550 84 84

1821 1649 3076 2754

2807 2761 92 90

1070 1109 36 37

1573 1587 51 52

2413 2475 711 81

100 100 39 39

7551 7613 249 2411

5180 5239 1611 172

5951 5970 196 197

9798 9661 21601 21299

10 206 10 064 22500 22187

8375 8246 18464 18179

8909 8772 19641 19339

12 158 11 488 26804 25327

13 198 13 297 29097 29315

21 23 27 30

2550 2550 84 84

1741 1579 2941 2637

2779 2733 91 811

1102 1140 37 38

1590 1603 52 53

2455 2517 80 83

100 100 39 39

7593 7655 2410 251

5205 5264 170 173

5964 5983 196 197

9406 9288 20737 20477

9798 9675 21601 21330

8007 7896 17652 17408

8518 8400 18779 18519

11 693 11 076 25779 24418

13 539 13 621 29848 30029

ISO 23727

23 25 30 33

22 24 29 31

2550 2750 84 90

1674 1521 2829 2540

2698 2698 810 810

1205 1205 311 311

1648 1648 54 54

2586 2586 85 85

93 93 37 37

7718 7718 253 253

5294 5294 174 174

5984 6075 197 1911

9049 8952 19950 19736

9426 9325 20781 20558

7702 7607 16980 16771

8193 8093 18062 17842

10 432 10 375 22999 22873

13 487 13 590 29734 29961

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

21

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Bucket Specifications

930K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 915 765 872 730 ndash lbyd3 1540 1298 1468 1237 ndash

Clearance full lift 45deg dump mm 2509 2509 2479 2479 +593 ftin 82 82 81 81 +111

Reach full lift 45deg dump mm 1257 1257 1286 1286 +320 ftin 41 41 42 42 +10

Reach 2130 mm (70) clearance 45deg dump mm 1579 1579 1588 1588 +717 ftin 52 52 52 52 +24

Reach level arm level bucket mm 2773 2773 2815 2815 +653 ftin 91 91 92 92 +21

Dig depth mm 100 100 100 100 +35 in 39 39 39 39 +14

Length overall mm 7911 7911 7953 7953 +794 ftin 2511 2511 261 261 +27

Height overall mm 5445 5725 5471 5752 +593 ftin 1710 189 1711 1810 +111

Turning radius bucket at carry mm 6152 6152 6166 6166 +384 ftin 202 202 202 202 +13

Tipping load ndash straight ISO 14397-1 kg 9059 9028 8675 8646 ndash2741 lb 19972 19903 19125 19061 ndash6043

Tipping load ndash straight rigid tire kg 9436 9404 9036 9006 ndash2855 lb 20803 20732 19921 19855 ndash6294

Tipping load ndash full turn ISO 14397-1 kg 7688 7655 7326 7295 ndash2402 lb 16949 16876 16151 16061 ndash5296

Tipping load ndash full turn rigid tire kg 8178 8143 7794 7761 ndash2555 lb 18029 17952 17183 17110 ndash5633

Breakout force kg 9020 8969 8730 8682 ndash299 lb 19886 19773 19246 19141 ndash659

Operating weight kg 13 651 13 721 14 004 14 069 +247 lb 30095 30250 30874 31017 +545

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

22

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

930K Bucket Selection Table

kgm3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

m3 yd3

1375

2317

115

kgm3 lbyd3

Bucket Fill Factor High Liftlbyd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

111 106 102 98 95 114 109 104 100 96

114 108 103 98 94 115 110 105 101 97

114 109 104 99 95 109 104 99 94

21 27 ndash576 ndash971

Pin On 23 30 ndash522 ndash880

Gen

eral

Pur

pose 25 33 ndash477 ndash804

21 27 ndash568 ndash957

Fusion 23 30 ndash515 ndash867 25 33 ndash470 ndash792

m3 yd3 kgm3 lbyd3

650 700 750 800 850 1095 1180 1264 1348 1432

114 108 109 102

109 103 112 104

kgm3 900 950 1000 1050 1100 1150Bucket Fill Factor High Lift

lbyd3 1517 1601 1685 1769 1854 1938

102 9642 55 ndash272 ndash458

Ligh

tM

ater

ial Pin On

Fusion

9650 65 ndash229 ndash387 9742 55 ndash269 ndash452

9750 65 ndash226 ndash382

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

930K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

930K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +11 mm +04 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in

Reach +103 mm +41 in +88 mm +35 in

Tipping load ndash straight ndash150 kg ndash331 lb ndash143 kg ndash315 lb

Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb

Breakout force ndash121 kg ndash267 lb ndash115 kg ndash254 lb

Operating weight +120 kg +265 lb +116 kg +256 lb

23

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Bucket Specifications

938K Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Width bucket mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm in

Length overall mm ftin

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

25 33

23 30

2750 90

1940 3238

2869 94

1108 37

1637 54

2452 80

100 39

7604 2411

5242 172

6117 200

11 385 25100

11 859 26145

9698 21380

10 317 22745

13 813 30452

15 146 33391

General Purpose

Pin On

25 33

23 30

2750 90

1848 3085

2834 93

1146 39

1658 55

2504 82

101 4

7656 251

5273 173

6133 201

10 892 24013

11 346 25014

9238 20366

9827 21665

13 170 29035

15 551 34284

Fusion

27 29 35 38

25 27 33 35

2750 2750 90 90

1780 1644 3026 2766

2822 2786 93 91

1146 1178 39 310

1652 1664 55 55

2514 2563 82 84

100 100 39 39

7666 7715 251 253

5301 5348 174 176

6136 6150 201 202

11 290 11 209 24890 24712

11 760 11 676 25926 25741

9610 9537 21186 21025

10 224 10 145 22540 22366

13 082 12 552 28841 27672

15 191 15 228 33490 33572

27 29 35 38

25 27 33 35

2750 2750 90 90

1695 1566 2881 2633

2787 2751 91 90

1185 1216 310 311

1672 1684 55 56

2566 2615 85 86

101 101 4 4

7718 7767 253 255

5332 5379 175 177

6152 6166 202 202

10 798 10 720 23806 23634

11 248 11 167 24798 24619

9151 9080 20175 20018

9735 9660 21462 21297

12 498 12 009 27553 26475

15 595 15 631 34381 34460

ISO 23727

27 29 35 38

26 27 34 35

2750 2750 90 90

1644 1519 2795 2555

2712 2675 810 89

1280 1311 42 43

1726 1735 57 58

2687 2736 89 811

93 93 37 37

7833 7882 258 2510

5415 5462 179 1711

6169 6185 202 203

10 470 10 398 23082 22924

10 907 10 832 24046 23880

8878 8812 19573 19427

9445 9375 20823 20668

11 299 10 887 24910 24002

15 481 15 515 34130 34205

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

24

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

938K Operating Specifications with Buckets

Light Material

High LiftPin On Fusion

Rated capacity m3 42 50 42 50 ndash yd3 55 65 55 65 ndash

Struck capacity m3 40 48 40 48 ndash yd3 52 63 52 63 ndash

Width bucket mm 2750 2750 2750 2750 ndash ftin 90 90 90 90 ndash

Nominal material density 100 fill factor kgm3 1080 905 1029 861 ndash lbyd3 1818 1535 1731 1460 ndash

Clearance full lift 45deg dump mm 2571 2571 2534 2534 +581 ftin 85 85 83 83 +110

Reach full lift 45deg dump mm 1294 1294 1331 1331 +267 ftin 42 42 44 44 +11

Reach 2130 mm (70) clearance 45deg dump mm 1654 1654 1666 1666 +666 ftin 55 55 55 55 +22

Reach level arm level bucket mm 2812 2812 2864 2864 +607 ftin 92 92 94 94 +111

Dig depth mm 100 100 101 101 +35 in 39 39 4 4 +14

Length overall mm 7964 7964 8016 8016 +740 ftin 261 261 263 263 +25

Height overall mm 5507 5786 5539 5820 +581 ftin 180 1811 182 191 +110

Turning radius bucket at carry mm 6227 6227 6244 6244 +357 ftin 205 205 205 205 +12

Tipping load ndash straight ISO 14397-1 kg 10 705 10 688 10 241 10 217 ndash2951 lb 23600 23563 22578 22525 ndash6506

Tipping load ndash straight rigid tire kg 11 151 11 134 10 668 10 643 ndash3074 lb 24584 24546 23519 23464 ndash6777

Tipping load ndash full turn ISO 14397-1 kg 9073 9054 8640 8614 ndash2577 lb 20003 19961 19048 18991 ndash5681

Tipping load ndash full turn rigid tire kg 9653 9632 9192 9164 ndash2741 lb 21281 21235 20265 20203 ndash6043

Breakout force kg 10 331 10 281 9936 9888 ndash502 lb 22776 22666 21905 21799 ndash1107

Operating weight kg 15 493 15 560 15 894 15 959 +249 lb 34156 34304 35040 35184 +549

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires

25

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125

lbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581

Gen

eral

Pur

pose

Pin On

25 33 111 106 102 98 95 27 35 111 106 102 98 29 38 113 108 103 98

Fusion

25 33 110 106 101 97 27 35 111 106 101 97 29 38 114 108 103

Bucket Specifications

938K Bucket Selection Table

m3 yd3

High Lift

kgm3

ndash519 lbyd3

ndash874 ndash477 ndash804 ndash442 ndash744 ndash509 ndash858 ndash468 ndash789 ndash43398 ndash730

Bucket Fill Factor 650 700

1095 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938

m3 yd3 kgm3 lbyd3

kgm3 750 800 850 900 950 1000 1050 1100 1150 lbyd3

High Lift

Ligh

tM

ater

ial 114 108 103 98

113 107 101 95 114 108 103 98

115 108 101 96

Pin On 42 55 ndash295 ndash496 50 65 ndash249 ndash419

Fusion 42 55 ndash290 ndash488 50 65 ndash245 ndash412

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

938K Fill Factors

Materials Density Fill

Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115

Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100

Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100

938K Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in

Reach +102 mm +4 in +87 mm +34 in

Tipping load ndash straight ndash138 kg ndash304 lb ndash144 kg ndash317 lb

Tipping load ndash full turn ndash135 kg ndash298 lb ndash141 kg ndash311 lb

Breakout force ndash112 kg ndash247 lb ndash115 kg ndash254 kg

Operating weight +111 kg +245 lb +116 kg +256 lb

26

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Sand and Gravel Bucket Specifications

Purpose Built Configuration Sand and Gravel Performance Series Buckets Belly Mounted Counterweight

Maximize your productivity while keeping The buckets feature a longer floor open Additional counterweight improves stability your operating costs low Cat Aggregate throat curved side bars and additional without reducing ground clearance or Handlers are built for sand and gravel serviceable wear plates for extended life departure angle to maximize performance rehandling to maximize your profits

Aggregate Handler Operating Specifications with Buckets

Rated capacity m3

yd3

Struck capacity m3

yd3

Bucket width mm ftin

Nominal material density 100 fill factor kgm3

lbyd3

Clearance full lift 45deg dump mm ftin

Reach full lift 45deg dump mm ftin

Reach 2130 mm (70) clearance 45deg dump mm ftin

Reach level arm level bucket mm ftin

Dig depth mm ftin

Length overall mm in

Height overall mm ftin

Turning radius bucket at carry mm ftin

Tipping load ndash straight ISO 14397-1 kg lb

Tipping load ndash straight rigid tire kg lb

Tipping load ndash full turn ISO 14397-1 kg lb

Tipping load ndash full turn rigid tire kg lb

Breakout force kg lb

Operating weight kg lb

924K 924K

25 27 33 35

21 26 27 34

2750 2750 90 90

1521 1385 2541 2356

2753 2706 90 810

1028 1066 34 35

1504 1516 411 411

2366 2428 79 711

100 100 39 39

7509 7571 247 2410

5126 5184 169 170

6023 6054 199 1910

8890 8757 19599 19306

9260 9121 20415 20108

7606 7480 16768 16491

8091 7956 17838 17540

9027 8509 19901 18759

12 359 12 450 27247 27448

Pin On Sand and Gravel

930K 930K

27 32 35 42

26 30 34 39

2750 2750 90 90

1629 1366 2771 2294

2761 2724 90 811

1109 1140 37 38

1587 1598 52 52

2475 2524 81 83

100 100 39 39

7613 7662 2411 251

5239 5349 172 176

6060 6075 1910 1911

10 325 10 261 22763 22622

10 756 10 689 23713 23565

8799 8740 19398 19268

9359 9297 20633 20496

11 430 10 957 25199 24156

13 946 13 983 30746 30827

938K 938K

32 35 42 46

30 34 39 44

2750 2750 90 90

1579 1371 2653 2300

2786 2663 91 88

1178 1362 310 45

1664 1779 55 510

2563 2776 84 91

100 100 39 39

7715 7928 253 260

5411 5453 179 1710

6150 6215 202 204

11 890 11 328 26213 24974

12 385 11 785 27304 25981

10 108 9599 22284 21162

10 752 10 189 23704 22463

12 506 10 435 27571 23005

15 842 16 077 34926 25444

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for machines configured with pin on buckets bolt-on cutting edges heavy (924K) or logger (930K and 938K) counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires

27

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

95

102 97

99 94

Operating Specifications

Aggregate Handler Bucket Selection Table

kgm3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1825 1900Bucket Fill Factor

lbyd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 3075 3202

Agg

rega

teH

andl

er

924K

930K

938K

111 105 100 113 107 101 96

112 107 111 105 99 94

115 109 104 112 105 100 95

m3 yd3

25 33 27 35 27 35 32 42 32 42 35 46

Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing

Aggregate Handler Fill Factors

Materials Density Fill

Dry sand ~ 1450 kgm3 ~ 2407 lbyd3 ~ 115

Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105

Damp sand ~ 1700 kgm3 ~ 2822 lbyd3 ~ 115

Aggregate Handler Ground Engagement Options

Long Teeth and Segments Short Teeth and Segments

Dig depth +12 mm +05 in +5 mm +02 in

Length overall +146 mm +57 in +121 mm +48 in

Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in

Reach +104 mm +41 in +89 mm +35 in

Tipping load ndash straight ndash151 kg ndash332 lb ndash145 kg ndash319 lb

Tipping load ndash full turn ndash148 kg ndash326 lb ndash142 kg ndash312 lb

Breakout force ndash121 kg ndash266 lb ndash115 kg ndash253 lb

Operating weight +120 kg +264 lb +116 kg +255 lb

28

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Operating Specifications with Pallet Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Pallet Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40

2 Load center 610 mm 20 610 mm 20 610 mm 20

3 Length overall 7840 mm 258 7882 mm 2510 7942 mm 260

4 Reach ground 891 mm 211 926 mm 30 961 mm 31

5 Dig depth 47 mm 19 47 mm 19 44 mm 17

6 Reach level arm 1522 mm 411 1569 mm 51 1617 mm 53

7 Reach full lift 724 mm 24 767 mm 26 814 mm 28

8 Clearance level arm 1761 mm 59 1792 mm 510 1830 mm 60

9 Clearance full lift 3639 mm 1111 3693 mm 121 3758 mm 123

10 Height overall 4621 mm 151 4676 mm 154 4740 mm 156

Tipping load ndash straight ISO 14397-1 6615 kg 14584 lb 7351 kg 16206 lb 8571 kg 18896 lb

Tipping load ndash full turn ISO 14397-1 5670 kg 12500 lb 6287 kg 13860 lb 7311 kg 16118 lb

Operating weight 12 070 kg 26610 lb 13 166 kg 29026 lb 15 056 kg 33193 lb

Rated load of full turn tip

50 of tip SAE J1197 2835 kg 6250 lb 3144 kg 6931 lb 3655 kg 8058 lb

60 of tip rough terrain EN474-3 3402 kg 7500 lb 3772 kg 8316 lb 4387 kg 9672 lb

80 of tip firm and level EN474-3 4536 kg 10000 lb 5030 kg 11089 lb 5849 kg 12895 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

1566 mm

1550 mm

51

51

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

29

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Operating Specifications

Operating Specifications with Construction Forks

9

8

5

10

7

3

2

1 4

6

13

11

12

Construction Fork ndash Fusion

924K 930K 938K

1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50

2 Load center 762 mm 26 762 mm 26 762 mm 26

3 Length overall 8263 mm 271 8305 mm 272 8366 mm 275

4 Reach ground 1009 mm 33 1045 mm 35 1081 mm 36

5 Dig depth 120 mm 47 ndash120 mm ndash47 ndash119 mm ndash47

6 Reach level arm 1580 mm 52 1627 mm 54 1675 mm 55

7 Reach full lift 782 mm 26 825 mm 28 872 mm 210

8 Clearance level arm 1698 mm 56 1729 mm 58 1766 mm 59

9 Clearance full lift 3575 mm 118 3630 mm 1110 3693 mm 121

10 Height overall 4880 mm 160 4935 mm 162 0 mm 0

Tipping load ndash straight ISO 14397-1 5911 kg 13032 lb 6604 kg 14559 lb 7749 kg 17084 lb

Tipping load ndash full turn ISO 14397-1 5036 kg 11102 lb 5617 kg 12383 lb 6577 kg 14500 lb

Operating weight 12 404 kg 27346 lb 13 501 kg 29765 lb 15 390 kg 33929 lb

Rated load of full turn tip

50 of tip SAE J1197 2518 kg 5551 lb 2808 kg 6191 lb 3288 kg 7249 lb

60 of tip rough terrain EN474-3 3022 kg 6662 lb 3370 kg 7430 lb 3946 kg 8699 lb

80 of tip firm and level EN474-3 4029 kg 8882 lb 4494 kg 9908 lb 5261 kg 11599 lb

11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11

12 Carriage width

13 Maximum fork spacing

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

2498 mm

2375 mm

82

79

Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool heavy counterweights 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires

30

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Operating Specifications with Material Handling Arm

5

6

7

8

13

18 19

20

21

12

11

14

4

3

10

9

2

1

15

16

17

22

Material Handling Arm ndash Fusion

924K 930K 938K 924K 930K 938K

1 2279 mm 75 2113 mm 611 2144 mm 70 12 5280 mm 173 5327 mm 175 5376 mm 177

2 2551 mm 84 2333 mm 77 2362 mm 78 13 1823 mm 511 1854 mm 60 1890 mm 62

3 3223 mm 106 2919 mm 96 2943 mm 97 14 278 mm 10 863 mm 29 906 mm 211

4 3896 mm 129 3505 mm 116 3525 mm 116 15 373 mm 12 1045 mm 35 1089 mm 36

5 4867 mm 1511 5257 mm 172 5343 mm 176 16 411 mm 14 1276 mm 42 1324 mm 44

6 5134 mm 1610 5568 mm 183 5655 mm 186 17 448 mm 15 1507 mm 411 1559 mm 51

7 5567 mm 183 6112 mm 200 6204 mm 204 18 2013 mm 67 1975 mm 65 1983 mm 66

8 6000 mm 198 6657 mm 2110 6754 mm 221 19 2381 mm 79 2310 mm 76 2316 mm 77

9 3307 mm 1010 3354 mm 110 3403 mm 111 20 3180 mm 105 3076 mm 101 3081 mm 101

10 3680 mm 120 3727 mm 122 3775 mm 124 21 3979 mm 130 3842 mm 127 3846 mm 127

11 4480 mm 148 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810

Operating weight 11 926 kg 26292 lb 13 361 kg 29456 lb 15 244 kg 33606 lb

Rated load (50 of full turn tip SAE J1197)

Fixed tab (9) 2023 kg 4460 lb 2329 kg 5134 lb 2705 kg 5963 lb

Minimum extension (10) 1853 kg 4085 lb 2135 kg 4706 lb 2482 kg 5472 lb

Middle extension (11) 1569 kg 3459 lb 1811 kg 3992 lb 2109 kg 4649 lb

Maximum extension (12) 1361 kg 2999 lb 1572 kg 3466 lb 1833 kg 4041 lb

Full compliance to EN474-3 and SAE J1197

31

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Supplemental Specifications

Optional Equipment

924K 930K 938K

Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with

Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket

kg lb kg lb kg lb kg lb kg lb kg lb

Without heavy counterweight ndash320 ndash705 ndash521 ndash1149 ndash320 ndash705 ndash509 ndash1122 ndash320 ndash705 ndash502 ndash1107

Without cab (semi-cab option) ndash100 ndash220 ndash116 ndash256 ndash100 ndash220 ndash112 ndash247 ndash100 ndash220 ndash113 ndash249

With guard driveshaft +44 +97 +12 +26 +44 +97 +12 +26 +45 +99 +12 +26

With ride control +49 +107 +27 +60 +49 +107 +27 +60 +49 +108 +27 +60

With roading fenders +18 +40 +25 +55 +18 +40 +24 +53 +18 +40 +24 +53

With guards front lights +11 +24 +2 +4 +11 +24 +2 +4 +11 +24 +2 +4

With guard hitch +54 +119 +37 +82 +54 +119 +36 +79 +54 +119 +36 +79

With guard front window +34 +75 +19 +42 +34 +75 +19 +42 +34 +75 +19 +42

With guards steering cylinders +14 +31 +10 +22 +14 +31 +10 +22 +14 +31 +10 +22

With guard power train lower +77 +170 +72 +159 +77 +170 +70 +154 +70 +154 +63 +139

With secondary steering +69 +152 +76 +168 +69 +152 +74 +163 +69 +152 +74 +163

With guard crankcase +19 +42 +25 +55 +19 +42 +25 +55 +11 +24 +14 +31

With guards power train side +11 +24 +9 +20 +11 +24 +9 +20 +11 +24 +9 +20

With tool box +44 +97 +26 +57 +44 +97 +25 +55 +44 +97 +25 +55

With guard rear waste gate NA NA NA NA +276 +608 +495 +1091 +276 +608 +488 +1076

With cold start package +54 +119 +77 +170 +54 +119 +75 +165 +54 +119 +75 +165

With logger counterweight NA NA NA NA +400 +882 +564 +1243 +400 +882 +557 +1228

32

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

924K 930K 938K Standard Equipment

Standard Equipment

Standard equipment may vary Consult your Cat dealer for details

POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C71 ACERT engine

ndash Tier 3Stage IIIA compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather

bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential front open bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control

ndash 4 speed ranges ndash Rimpull control ndash Creeper control

bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)

HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotS ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR

ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear

OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External mirrors bull Ground level cab door release bull Gauges

ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer

bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers

turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front

OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments

NOTE Not all features are available in all regions See your Cat dealer for more information

33

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

924K 930K 938K Optional Equipment

Optional Equipment

Optional equipment may vary Consult your Cat dealer for details

bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Axles differential lock front bull Beacon light rotating or strobe bull Camera rearview (standard in Europe) bull Cold start package

ndash Ether starting aid ndash Block heater ndash Additional batteries (2)

bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Guards

ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield ndash Steer cylinder ndash Hitch ndash Tilt cylinder

bull Hydraulic control auxiliary third and fourth function

bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages

ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players

ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface

microphone and auxiliary inputs for MP3 players bull Remote axle breathers bull Ride Control System bull Seats

ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest

bull Semi-cab bull Steering

ndash Dual mode ndash Secondary

bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture

bull Toolbox additional bull Work tools

NOTE Not all features are available in all regions See your Cat dealer for more information

34

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

Notes

35

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)

For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom

copy 2013 Caterpillar Inc

All rights reserved

Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options

CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission

AEHQ7034 (07-2013)