LARGE SALVAGE PACKAGING - bauer-suedlohn.de · time according to DIN EN ISO 9001:2008; the...
Transcript of LARGE SALVAGE PACKAGING - bauer-suedlohn.de · time according to DIN EN ISO 9001:2008; the...
LARGE SALVAGE PACKAGING
INNOVATION | CONSTRUCTION | PRODUCTION
HAZARDOUS MATERIALS CONTAINERS
...made by
Finish hot-dip galvanized
The ADR 2015 makes special provisions for transport packaging used to carry dangerous goods when the original packaging has leaked, is damaged or defective or if it does not conform to ADR requirements. Any packaging with a volume of more than 60 litres that is involved in a spill must be transported in salvage packaging.
Our Large Salvage Packaging type SAG is approved for the transport of dam-aged, defective or leaking packaging carrying hazardous materials as well as for hazardous materials intended for recycling or disposal. International trans-port of liquids, solids or paste-like substances according to the ADR/RID/IMDG codes, packing groups II and III.
Product characteristics common to all designs
� Construction made of 3 mm steel sheet
� Reinforced edging
� Full length fork sleeves
� Sturdy stacking corners with crane eyes
� Suitable for pick-up by pallet-, forklift truck or crane
� Lid fasteners, one lockable
� Lid with special seal
� Marking "SALVAGE" on two sides
Hazardous Materials Containers › Large Salvage Packaging
LARGE SALVAGE PACKAGING TYPE SAG
§ UN-APPROVALS
nu 50AT/Y/D/14727-BAUERnu 50AT/Y/D/14807-BAUERnu 50AT/Y/D/14808-BAUERnu 50AT/Y/D/14809-BAUER
Volumein l
Outer dimensions in mm (l x w x h)
Inner dimensions in mm (l x w x h)
Can be stacked Lid fasteners (pcs)
Total permitted weight in kg
Weight in kg
SAG 800 800 1200 x 1000 x 1235 1036 x 836 x 925 3 high 12 1008 225SAG 1500 1563 1564 x 1364 x 1235 1400 x 1200 x 925 2 high 14 1887 369SAG 2100 2135 1564 x 1364 x 1560 1400 x 1200 x 1250 2 high 14 2486 424SAG 2700 2870 1564 x 1364 x 1949 1400 x 1200 x 1639 2 high 14 3335 477
SAG 800, 1500, 2100 and 2700 (from left to right)
Finish hot-dip galvanized
Hazardous Materials Containers › Large Salvage Packaging
LARGE SALVAGE PACKAGING TYPE SAGDesigns
SAG 800 � According to standard "DIN 30741 part I" � Base frame and lid made of 2.5 mm steel sheet with strengthening plates
� Spring assisted lid � Lid support in 70° position � Automatic lid lock in 270° position
SAG 1500 � Base frame and lid made of 3 mm steel sheet with strengthening plates
� Spring assisted lid and lid support
SAG 2100 � Base frame and lid made of 3 mm steel sheet with strengthening plates
� Spring assisted lid and lid support � Folding step on two sides
SAG 2700 � Base frame and lid made of 3 mm steel sheet with strengthening plates
� Lid with fork sleeves for handling i.e. removing, replacing
� Folding step on two sides
Accessories � Acid-resistant coating � PE foil bags (100 bags/roll)
SAG 800: requires only one person to open SAG 800: lid support in 70° position
SAP 800: recovery using a Crane Hook type LH and Drum Traverse type FT
SAG 800: recovery using a Crane Hook type LH and Drum Traverse type FT
SAG 2100: recovery of a Special Waste Container SAG 2100: recovery of a Special Waste Container
SAG 2700: lid with fork sleeves for handling, i.e. removing, replacing SAG 2100: two people required to open
BAUER GmbH develops and manufactures attachments for the forklift truck, products for the environmental sector and recycling and waste containers and also sells them to international markets.
Founded in 1966 by Heinz Dieter Bauer, today the company has more than 300 employees and is one of the leading European manufacturers in this field.
Qualified personnel and the use of the most modern manufacturing technology available guarantee our products meet the highest standards where safety and quality are concerned. In 1993 the company was certified for the first time according to DIN EN ISO 9001:2008; the implementation of this quality assurance management system guarantees consistent high quality "made by BAUER"
Suedlohn Site I, Manufacturing and Administration Halberstadt Site II, Manufacturing
990 tonnes C02 savings
per year thanks to rooftop
photovoltaic installations!
Company name
Contact person
Street, Number
Postcode
Phone Fax
Date Signature
Please contact us
Please send me a copy of the free BAUER catalogue 7.0
Please send me a copy of the free catalogue for Recycling & Waste Materials Containers
Please issue a quotation for No. of units :SAG 800 No. of units :SAG 1500 No. of units :SAG 2100 No. of units :SAG 2700
Please send us the completed request form per fax or call us. ... made by
…einzigartig vielseitig
�Wertstoff- & Abfallcontainer
STAPLER-ANBAUGERÄTE
UMWELT-LAGERTECHNIK
GEFAHRGUT-CONTAINER
WERTSTOFF-CONTAINER
... made by
7.0 INNOVATION | KONSTRUKTION | PRODUKTION
... made by
...uniquely diverse
� Recycling and Waste Materials Containers
FORKLIFT TRUCK ATTACHMENTS
ENVIRONMENT / STORAGE
HAZARDOUS MATERIALS CONTAINERS
RECYCLING BANKS
... made by
7.0 INNOVATION | CONSTRUCTION | PRODUCTION
BAUER GmbHEichendorffstr. 62 • 46354 Südlohn • GermanyTel. + 49 2862 709-0 • Fax +49 2862 709-155
[email protected] • www.geotainer.com
INNOVATION – CONSTRUCTION – PRODUCTION