PRO-S ™ SPRAYS

5YEARWARRANTY

The Pro-S Spray is designed to providelong life and outstanding performance.

Co-Molded Wiper Seal – Ensures a leak free,full pop-up operation even under low-pressuresituations. Cartridge design allows for easyremoval and cleaning. Treated with UV inhibitorsfor long life. Seal is microbe resistant to reducedegradation and stick-ups.

Accepts Female Threaded Nozzles

Ratcheting Riser – Permits quick, easy alignmentof spray pattern.

Heavy-Duty Retraction Spring – Strongest spring in the industry for positive retraction in all soil conditions.

Side and Bottom Inlets – On 6" and12" models.

Wide Selection of Sizes – Availablein 2", 3", 4", 6" and 12" models.

Pre-Installed Flush Cap

Optional In-stem Pressure Regulator –available for 4", 6" and 12" models

Five Year Limited Warranty.

The result of precision engineering and extensive fieldtesting by contractors around the world, the PRO-Sis designed to provide long life and outstandingperformance. PRO-S sprays are rugged, contractor-friendly sprays. Available in 2", 3", 4", 6" and 12" pop-upheights, the PRO-S spray is designed to be compatiblewith all standard female-threaded nozzles.

PRO-S pop-up sprays are built with the contractorin mind. The co-molded wiper seal ensures proper operation time after time with minimal flow by.

MODELS78002 2" Pop-up (5 cm) 78006 6" Pop-up (15 cm)

78003 3" Pop-up (7.5 cm) 78012 12" Pop-up (30 cm)

78004 4" Pop-up (10 cm)

OTHER OPTIONS: ADD TO PART NUMBER

- PR Pressure Regulator (4", 6" & 12" models only)

Model Number

HOW TO SPECIFY

78002

Description

2" PRO-S

KVF-8; 8’ GREEN KVF-10; 10’ BLUE KVF-12; 12’ BROWN KVF-15; 15’ BLACKPRESSURE RADIUS FLOW RADIUS FLOW RADIUS FLOW RADIUS FLOW

ARC (PSI) (FT) (GPM) (FT) (GPM) (FT) (GPM) (FT) (GPM)

45 20 9 0.5 12 0.5 12 0.8 16 0.930 10 0.8 13 0.8 14 0.9 17 1.140 10 1.0 13 1.0 14 1.1 18 1.350 11 1.1 14 1.1 15 1.2 19 1.4

90 20 9 0.7 12 0.7 12 1.1 15 1.330 9 1.1 12 1.1 13 1.3 17 1.640 10 1.4 13 1.4 14 1.5 18 1.850 11 1.5 14 1.5 15 1.7 19 2.0

120 20 8 1.1 11 1.1 11 1.4 14 1.730 9 1.4 12 1.4 12 1.6 16 2.140 10 1.7 13 1.7 13 2.0 17 2.350 10 1.9 13 1.9 14 2.2 18 2.6

180 20 8 1.4 11 1.4 11 1.6 14 1.830 8 1.6 11 1.6 12 1.8 15 2.340 9 1.8 12 1.8 13 2.2 16 2.650 10 2.0 13 2.0 14 2.4 18 2.8

240 20 8 1.3 10 1.3 11 1.8 14 2.430 8 1.9 11 1.9 12 2.3 15 2.940 9 2.2 12 2.2 13 2.4 16 3.250 9 2.5 12 2.5 13 2.9 17 3.7

270 20 8 1.7 10 1.7 11 1.9 14 2.730 8 2.0 10 2.0 12 2.4 15 3.240 8 2.3 11 2.3 12 2.6 16 3.650 9 2.6 12 2.6 13 3.0 16 4.0

360 20 8 2.2 10 2.2 11 2.8 13 3.430 8 2.7 10 2.7 12 3.1 15 4.240 8 3.0 11 3.0 12 3.5 15 4.750 8 3.5 12 3.5 13 3.9 16 5.3

Data represents test results in zero wind. Adjust for local conditions. Radius may be reduced with nozzle retention screw.

K-RAIN VARIABLE ARC NOZZLES STANDARD PERFORMANCE DATA

SPECIFICATIONSPressure Rating: 20 - 70 PSI

Flow-by: 0 to 8 psi (0.6 bar) 0.20 gpm

Precipitation Rate: .4 - 4 in./hr

Inlet: 1/2" NPT Female Thread

© K-Rain Manufacturing CorporationAN ISO 9001:2000 CERTIFIED COMPANY L-78000

K-Rain Manufacturing Corp.1640 Australian AvenueRiviera Beach, FL 33404 USA+1 561 844-1002FAX: +1 561 842-9493

1.800.735.7246 | www.krain.com

KVF-8; 8’ GREEN KVF-10; 10’ BLUE KVF-12; 12’ BROWN KVF-15; 15’ BLACKPRESSURE RADIUS FLOW RADIUS FLOW RADIUS FLOW RADIUS FLOW

ARC (kPa) (BARS) (M) (L/M) (M) (L/M) (M) (L/M) (M) (L/M)

45 138 1.38 2.7 1.9 3.7 1.9 3.7 3.0 4.9 3.4207 2.07 3.0 3.0 4.0 3.0 4.3 3.4 5.2 4.2276 2.76 3.0 3.8 4.0 3.8 4.3 4.2 5.5 4.9345 3.45 3.4 4.2 4.3 4.2 4.6 4.5 5.8 5.3

90 138 1.38 2.7 2.6 5.5 6.4 4.6 4.9 3.7 4.2207 2.07 2.7 4.2 3.7 4.0 4.9 4.2 5.2 6.1276 2.76 3.0 5.3 4.0 5.3 4.3 5.7 5.5 6.8345 3.45 3.4 5.7 4.3 5.7 4.6 6.4 5.8 7.6

120 138 1.38 2.4 4.2 3.4 4.2 3.4 5.3 4.3 6.4207 2.07 2.7 5.3 3.7 5.3 3.7 6.1 4.9 7.9276 2.76 3.0 6.4 4.0 6.4 4.0 7.6 5.2 8.7345 3.45 3.0 7.2 4.0 7.2 4.3 8.3 5.5 9.8

180 138 1.38 2.4 5.3 3.4 5.3 3.4 6.1 4.3 6.8207 2.07 2.4 6.1 3.4 6.1 3.7 6.8 4.6 8.7276 2.76 2.7 6.8 3.7 6.8 4.0 8.3 4.9 9.8345 3.45 3.0 7.6 4.0 7.6 4.3 9.1 5.5 10.6

240 138 1.38 2.4 4.9 3.0 4.9 3.4 6.8 4.3 9.1207 2.07 2.4 7.2 3.4 7.2 3.7 8.7 4.6 11.0276 2.76 2.7 8.3 3.7 8.3 4.0 9.1 4.9 12.1345 3.45 2.7 9.5 3.7 9.5 4.0 11.0 5.2 14.0

270 138 1.38 2.4 6.4 3.0 6.4 3.4 7.2 4.3 10.2207 2.07 2.4 7.6 3.0 7.6 3.7 9.1 4.6 12.1276 2.76 2.4 8.7 3.4 8.7 3.7 9.8 4.9 13.6345 3.45 2.7 9.8 3.7 9.8 4.0 11.4 4.9 15.1

360 138 1.38 2.4 8.3 3.0 8.3 3.4 10.6 4.0 12.9207 2.07 2.4 10.2 3.0 10.2 3.7 11.7 4.6 15.9276 2.76 2.4 11.4 3.4 11.4 3.7 13.2 4.6 17.8345 3.45 2.4 13.2 3.7 13.2 4.0 14.8 4.9 20.1

K-RAIN VARIABLE ARC NOZZLES METRIC PERFORMANCE DATA

PRO-S ™ SPRAYS

KVF NOZZLES

Pre-installedflush cap.

Male threaded body is compatiblewith all standard female nozzles.

CO-MOLDED WIPER SEAL Ensures a leak free, full pop-up operation evenunder low-pressure situations. Unique cartridgedesign featuring microbe-resistant durable material prevents degradation and stick-ups.

RUGGED CONSTRUCTIONThe K-Rain Pro-S line of spraysis distinguished by its robustconstruction, rugged body and cap, co-molded seal and heavy-duty retraction spring.

Overall Body Height:78002 - 4"78003 - 4 7/8"78004 - 6"78006 - 9 3/8"78012 - 16"

K-Rain’s KVF Adjustable Nozzles have a FEMALE thread configurationto fit PRO-S Spray bodies.

K-SPRAYS

Available in 3”, 4”, 6” and 12” Models – Provides flexibility in system design.

Accepts Male Threaded Nozzles (Except Model 74001-M).

Stainless Steel Retraction Spring – Provides reliable retraction of the riser in all soil conditions.

Ratcheting Riser – Allows for easy pattern alignment by turning the riser.

Heavy Duty Wiper Seal – Ensures leak free, full pop-up operation even under low-pressure situations.

Optional Purple Cap for Reclaimed Water use – Highly visible for identification of reclaimed water systems reducing liability.

Ideal for watering smaller areas, ground cover and shrub areas.

K-SPRAYS

MODELS 73001 3” Pop-Up74001 4” Pop-Up74001-M 4” Pop-Up w/Male Thread Riser – Accepts Female Threaded Nozzles76001 6” Pop-Up71201 12” Pop-Up

OTHER OPTIONS: ADD TO PART NUMBER

-RCW Reclaimed Water Use / Purple Cap

K-Rain Manufacturing Corp.1640 Australian AvenueRiviera Beach, FL 33404 USA+1 561 844-1002FAX: +1 561 842-9493

1.800.735.7246 | www.krain.com

SPECIFICATIONS Pressure Rating: 20 - 50 PSI Flow Range: .5 - 4.6 GPM Precipitation Rate: .4 - 1.91 in./hr Inlet: 1/2” NPT Female Thread

© K-Rain Manufacturing CorporationAN ISO 9001: 2008 CERTIFIED COMPANY L-10013

HOW TO SPECIFY

73001

Model Number

PERFORMANCE SPECIFICATIONS FOR KV & KVF NOZZLES

8’ GREEN 10’ BLUE 12’ BROWN 15’ BLACK 17’ GRAY-KV ONLY PRESSURE RADIUS FLOW RADIUS FLOW RADIUS FLOW RADIUS FLOW RADIUS FLOWARC (PSI) (FT) (GPM) (FT) (GPM) (FT) (GPM) (FT) (GPM) (FT) (GPM)

45 20 9 0.5 12 0.5 12 0.8 16 0.9 19 1.2 30 10 0.8 13 0.8 14 0.9 17 1.1 19 1.3 40 10 1.0 13 1.0 14 1.1 18 1.3 20 1.4 50 11 1.1 14 1.1 15 1.2 19 1.4 20 1.6

90 20 9 0.7 12 0.7 12 1.1 15 1.3 18 1.7 30 9 1.1 12 1.1 13 1.3 17 1.6 18 1.8 40 10 1.4 13 1.4 14 1.5 18 1.8 19 2.0 50 11 1.5 14 1.5 15 1.7 19 2.0 20 2.2

120 20 8 1.1 11 1.1 11 1.4 14 1.7 17 1.8 30 9 1.4 12 1.4 12 1.6 16 2.1 18 2.2 40 10 1.7 13 1.7 13 2.0 17 2.3 19 2.3 50 10 1.9 13 1.9 14 2.2 18 2.6 19 2.6

180 20 8 1.4 11 1.4 11 1.6 14 1.8 17 1.9 30 8 1.6 11 1.6 12 1.8 15 2.3 18 2.4 40 9 1.8 12 1.8 13 2.2 16 2.6 19 2.6 50 10 2.0 13 2.0 14 2.4 18 2.8 19 2.9

240 20 8 1.3 10 1.3 11 1.8 14 2.4 16 2.5 30 8 1.9 11 1.9 12 2.3 15 2.9 17 3.1 40 9 2.2 12 2.2 13 2.4 16 3.2 18 3.2 50 9 2.5 12 2.5 13 2.9 17 3.7 18 3.6

270 20 8 1.7 10 1.7 11 1.9 14 2.7 16 2.9 30 8 2.0 10 2.0 12 2.4 15 3.2 17 3.4 40 8 2.3 11 2.3 12 2.6 16 3.6 18 4.0 50 9 2.6 12 2.6 13 3.0 16 4.0 18 4.5

360 20 8 2.2 10 2.2 11 2.8 13 3.4 15 3.5 30 8 2.7 10 2.7 12 3.1 15 4.2 17 4.4 40 8 3.0 11 3.0 12 3.5 15 4.7 17 4.9 50 8 3.5 12 3.5 13 3.9 16 5.3 18 5.4

METRIC

8’ GREEN 10’ BLUE 12’ BROWN 15’ BLACK 17’ GRAY-KV ONLY PRESSURE RADIUS FLOW RADIUS FLOW RADIUS FLOW RADIUS FLOW RADIUS FLOWARC KPA BARS (M) (L/M) (M) (L/M) (M) (L/M) (M) (L/M) (M) (L/M)

45 138 1.38 2.7 1.9 3.7 1.9 3.7 3.0 4.9 3.4 5.8 4.5 207 2.07 3.0 3.0 4.0 3.0 4.3 3.4 5.2 4.2 5.8 4.9 276 2.76 3.0 3.8 4.0 3.8 4.3 4.2 5.5 4.9 6.1 5.3 345 3.45 3.4 4.2 4.3 4.2 4.6 4.5 5.8 5.3 6.1 6.1

90 138 1.38 2.7 2.6 3.7 2.6 3.7 4.2 4.6 4.9 3.7 2.6 207 2.07 2.7 4.2 3.7 4.0 4.0 4.9 5.2 6.1 5.5 6.8 276 2.76 3.0 5.3 4.0 5.3 4.3 5.7 5.5 6.8 5.8 7.6 345 3.45 3.4 5.7 4.3 5.7 4.6 6.4 5.8 7.6 6.1 8.3

120 138 1.38 2.4 4.2 3.4 4.2 3.4 5.3 4.3 6.4 5.2 6.8 207 2.07 2.7 5.3 3.7 5.3 3.7 6.1 4.9 7.9 5.5 8.3 276 2.76 3.0 6.4 4.0 6.4 4.0 7.6 5.2 8.7 5.8 8.7 345 3.45 3.0 7.2 4.0 7.2 4.3 8.3 5.5 9.8 6.1 9.8

180 138 1.38 2.4 5.3 3.4 5.3 3.4 6.1 4.3 6.8 5.2 7.2 207 2.07 2.4 6.1 3.4 6.1 3.7 6.8 4.6 8.7 5.5 9.1 276 2.76 2.7 6.8 3.7 6.8 4.0 8.3 4.9 9.8 5.8 9.8 345 3.45 3.0 7.6 4.0 7.6 4.3 9.1 5.5 10.6 5.8 11.0

240 138 1.38 2.4 4.9 3.0 4.9 3.4 6.8 4.3 9.1 4.9 9.5 207 2.07 2.4 7.2 3.4 7.2 3.7 8.7 4.6 11.0 5.2 11.7 276 2.76 2.7 8.3 3.7 8.3 4.0 9.1 4.9 12.1 5.5 12.1 345 3.45 2.7 9.5 3.7 9.5 4.0 11.0 5.2 14.0 5.5 13.6

270 138 1.38 2.4 6.4 3.0 6.4 3.4 7.2 4.3 10.2 4.9 11.0 207 2.07 2.4 7.6 3.0 7.6 3.7 9.1 4.6 12.1 5.2 12.9 276 2.76 2.4 8.7 3.4 8.7 3.7 9.8 4.9 13.6 5.5 15.1 345 3.45 2.7 9.8 3.7 9.8 4.0 11.4 4.9 15.1 5.5 17.0

360 138 1.38 2.4 8.3 3.0 8.3 3.4 10.6 4.0 12.9 4.6 13.2 207 2.07 2.4 10.2 3.0 10.2 3.7 11.7 4.6 15.9 5.2 16.7 276 2.76 2.4 11.4 3.4 11.4 3.7 13.2 4.6 17.8 5.2 18.5 345 3.45 2.4 13.2 3.7 13.2 4.0 14.8 4.9 20.1 5.5 20.4

K-RAIN VARIABLE ARC NOZZLES

SPRAY HEAD CHECK VALVESPART # 53426 (OPTIONAL)

SHRUB ADAPTERPART # PSA

RPS SPRAYS

Available in 2”and 4” Models – Provides flexibility in system design.

Accepts Female Threaded Nozzles.

Stainless Steel Retraction Spring – Provides reliable retraction of the riser in all soil conditions.

Ratcheting Riser – Allows for easy pattern alignment by turning the riser.

Co-Molded Wiper Seal – Ensures leak free, full pop-up operation even under low-pressure situations.

Narrow Profile Body – Easy to retrofit with existing systems.

Ideal for watering smaller areas, ground cover and shrub areas.

RPS SPRAYSRPS pop-up sprays are built with the contractor in mind. With the narrow profile, replacement is effortless.

The RPS Spray is the only narrow profile spray with a co-molded wiper seal. The co-molded wiper seal ensures proper operation year after year with minimal flow by.

MODELS RPS-2 2” Narrow Profile Spray BodyRPS-4 4” Narrow Profile Spray Body

K-Rain Manufacturing Corp.1640 Australian AvenueRiviera Beach, FL 33404 USA+1 561 844-1002FAX: +1 561 842-9493

1.800.735.7246 | www.krain.com

SPECIFICATIONS Pressure Rating: 20 - 50 PSI Flow Range: .5 - 4.6 GPM Precipitation Rate: .3 - 4.0 in./hr Inlet: 1/2” NPT Female Thread

© K-Rain Manufacturing CorporationAN ISO 9001: 2008 CERTIFIED COMPANY L-10028

HOW TO SPECIFY

RPS-2 2” RPS

Model Number Description

PERFORMANCE SPECIFICATIONS FOR KVF NOZZLES

KVF-8; 8’ GREEN KVF-10; 10’ BLUE KVF-12; 12’ BROWN KVF-15; 15’ BLACK PRESSURE RADIUS FLOW RADIUS FLOW RADIUS FLOW RADIUS FLOWARC (PSI) (FT) (GPM) (FT) (GPM) (FT) (GPM) (FT) (GPM)

45 20 9 0.5 12 0.5 12 0.8 16 0.9 30 10 0.8 13 0.8 14 0.9 17 1.1 40 10 1.0 13 1.0 14 1.1 18 1.3 50 11 1.1 14 1.1 15 1.2 19 1.4

90 20 9 0.7 12 0.7 12 1.1 15 1.3 30 9 1.1 12 1.1 13 1.3 17 1.6 40 10 1.4 13 1.4 14 1.5 18 1.8 50 11 1.5 14 1.5 15 1.7 19 2.0

120 20 8 1.1 11 1.1 11 1.4 14 1.7 30 9 1.4 12 1.4 12 1.6 16 2.1 40 10 1.7 13 1.7 13 2.0 17 2.3 50 10 1.9 13 1.9 14 2.2 18 2.6

180 20 8 1.4 11 1.4 11 1.6 14 1.8 30 8 1.6 11 1.6 12 1.8 15 2.3 40 9 1.8 12 1.8 13 2.2 16 2.6 50 10 2.0 13 2.0 14 2.4 18 2.8

240 20 8 1.3 10 1.3 11 1.8 14 2.4 30 8 1.9 11 1.9 12 2.3 15 2.9 40 9 2.2 12 2.2 13 2.4 16 3.2 50 9 2.5 12 2.5 13 2.9 17 3.7

270 20 8 1.7 10 1.7 11 1.9 14 2.7 30 8 2.0 10 2.0 12 2.4 15 3.2 40 8 2.3 11 2.3 12 2.6 16 3.6 50 9 2.6 12 2.6 13 3.0 16 4.0

360 20 8 2.2 10 2.2 11 2.8 13 3.4 30 8 2.7 10 2.7 12 3.1 15 4.2 40 8 3.0 11 3.0 12 3.5 15 4.7 50 8 3.5 12 3.5 13 3.9 16 5.3

METRIC

KVF-8; 8’ GREEN KVF-10; 10’ BLUE KVF-12; 12’ BROWN KVF-15; 15’ BLACK PRESSURE RADIUS FLOW RADIUS FLOW RADIUS FLOW RADIUS FLOW ARC KPA BARS (M) (L/M) (M) (L/M) (M) (L/M) (M) (L/M)

45 138 1.38 2.7 1.9 3.7 1.9 3.7 3.0 4.9 3.4 207 2.07 3.0 3.0 4.0 3.0 4.3 3.4 5.2 4.2 276 2.76 3.0 3.8 4.0 3.8 4.3 4.2 5.5 4.9 345 3.45 3.4 4.2 4.3 4.2 4.6 4.5 5.8 5.3

90 138 1.38 2.7 2.6 3.7 2.6 3.7 4.2 4.6 4.9 207 2.07 2.7 4.2 3.7 4.0 4.0 4.9 5.2 6.1 276 2.76 3.0 5.3 4.0 5.3 4.3 5.7 5.5 6.8 345 3.45 3.4 5.7 4.3 5.7 4.6 6.4 5.8 7.6

120 138 1.38 2.4 4.2 3.4 4.2 3.4 5.3 4.3 6.4 207 2.07 2.7 5.3 3.7 5.3 3.7 6.1 4.9 7.9 276 2.76 3.0 6.4 4.0 6.4 4.0 7.6 5.2 8.7 345 3.45 3.0 7.2 4.0 7.2 4.3 8.3 5.5 9.8

180 138 1.38 2.4 5.3 3.4 5.3 3.4 6.1 4.3 6.8 207 2.07 2.4 6.1 3.4 6.1 3.7 6.8 4.6 8.7 276 2.76 2.7 6.8 3.7 6.8 4.0 8.3 4.9 9.8 345 3.45 3.0 7.6 4.0 7.6 4.3 9.1 5.5 10.6

240 138 1.38 2.4 4.9 3.0 4.9 3.4 6.8 4.3 9.1 207 2.07 2.4 7.2 3.4 7.2 3.7 8.7 4.6 11.0 276 2.76 2.7 8.3 3.7 8.3 4.0 9.1 4.9 12.1 345 3.45 2.7 9.5 3.7 9.5 4.0 11.0 5.2 14.0

270 138 1.38 2.4 6.4 3.0 6.4 3.4 7.2 4.3 10.2 207 2.07 2.4 7.6 3.0 7.6 3.7 9.1 4.6 12.1 276 2.76 2.4 8.7 3.4 8.7 3.7 9.8 4.9 13.6 345 3.45 2.7 9.8 3.7 9.8 4.0 11.4 4.9 15.1

360 138 1.38 2.4 8.3 3.0 8.3 3.4 10.6 4.0 12.9 207 2.07 2.4 10.2 3.0 10.2 3.7 11.7 4.6 15.9 276 2.76 2.4 11.4 3.4 11.4 3.7 13.2 4.6 17.8 345 3.45 2.4 13.2 3.7 13.2 4.0 14.8 4.9 20.1

K-RAIN VARIABLE ARC NOZZLES

CO-MOLDED WIPER SEALK-Rain’s co-molded wiper seal reduces flow by-pass at start up and provides durability for longer life.

KVF NOZZLESK-Rain’s KVF Adjustable Nozzles have a FEMALE thread configuration to fit RPS Spray bodies.