Lampart Inductive Lightning Catalogue

8/13/2019 Lampart Inductive Lightning Catalogue

1/32

Lampart Australasia

Induction LightingCatalogue2011 - 2012

Lampart Australasia Pty Ltd 6 Arkley Street, Bankstown NSW 2200 Ph: (612) 9790 8788 Fax: (612) 9790 8777Email: ABN: 94 147 824 [email protected]


2/32


3/32

Pg 01

INTRODUCTION Pg 01 - 02

SELF BALLAST & RETRO FIT LAMPS Pg 03 - 04

STREET LIGHTS Pg 05 - 08

TUNNEL LIGHTS Pg 09 - 11

FLOOD & PROJECTOR LIGHTS Pg 12 - 13

GARDEN LIGHTS Pg 14 - 15

HIGHBAYS Pg 16 - 22

DOWN LIGHTS Pg 23 - 24

CANOPY LIGHTS Pg 25 - 26

BULKHEADS Pg 27

EXPLOSION PROOF LIGHTS Pg 28

PROJECTS GALLERY Pg 29

Low Carbon Living, Starts from me!

Pg 01


4/32


5/32


6/32

Pg 04

LAI-YTO LAI-YTLLAI-YTO LAI-YTL

Pg 04


7/32

Pg 05

Size: 830 x 390 x 181mm

Ingress Protection: IP65

Marching Power: 60W / 85W / 125W / 165W

Material: The shell of the lamp is made of two parts which are made ofshock resistant high pressure die-cast aluminium, with a reflective covermoulded from high purity aluminium, with heat resistant tempered glasslens.

Applicable Height: 6m ~ 12m

Application areas: Applicable to the lighting of urban primary andsecondary roads, residential areas, Car Parks, Public squares.

Dimensions Light distribution curve

Size: 648 x 322 x 200mm


Matching Power: 60W / 85W / 125W / 165W

Material: High quality aluminium die-cast housing, with matt reflectorand heat resistant tempered glass lens with stainless steel fasteners.

Application Height: 4m~ 9m

Application areas: It is applicable to roads, streets, parks, squaresdocks.

Light distribution curveDimensions

Size: 830 x 390 x 181mm



Material: The shell of the lamp is made of two parts which are made ofshock resistant high pressure die-cast aluminium, with a reflective covermoulded from high purity aluminium, with heat resistant tempered glasslens.Applicable Height: 6m ~ 12m

Application areas: Applicable to the lighting of urban primary andsecondary roads, residential areas, Car Parks, Public squares.


Size: 648 x 322 x 200mm



Material: High quality aluminium die-cast housing, with matt reflectorand heat resistant tempered glass lens with stainless steel fasteners.

Application Height: 4m~ 9m

Application areas: It is applicable to roads, streets, parks, squaresdocks.


Pg 05


8/32

Pg 06


Size: 710 x 600 x 270mm



Material: The housing is made of impact-resistant high-pressure die-cast aluminium. The high-purity aluminium oxide reflector providesoptimal light distribution, complete with heat-resistant tempered glasstranslucent lens.

Applicable Height: 4m ~ 9m Application areas: Applicable to the lighting of urban primary andsecondary roads, residential areas, Car Parks, Public squares.

Size: 706 x 358 x 210mm



Material: The housing is made of die-cast aluminium alloy and has a

light weight structure with a property of corrosion resistance. Thereflecting cover is made of high purity aluminium, and beingprocessed by polishing treatment, the reflecting cover has a stableoptical performance and high reflectivity.

Application areas: It is applicable to illumination in municipal primaryand secondary areas, residential community, Public Park, Publicsquares and so on.



Size: 710 x 600 x 270mm



Material: The housing is made of impact-resistant high-pressure die-cast aluminium. The high-purity aluminium oxide reflector providesoptimal light distribution, complete with heat-resistant tempered glasstranslucent lens.

Applicable Height: 4m ~ 9mApplication areas: Applicable to the lighting of urban primary andsecondary roads, residential areas, Car Parks, Public squares.

Size: 706 x 358 x 210mm



Material: The housing is made of die-cast aluminium alloy and has a

light weight structure with a property of corrosion resistance. Thereflecting cover is made of high purity aluminium, and beingprocessed by polishing treatment, the reflecting cover has a stableoptical performance and high reflectivity.

Application areas: It is applicable to illumination in municipal primaryand secondary areas, residential community, Public Park, Publicsquares and so on.


Pg 06


9/32

Pg 07







HIGHBAYS Pg 16 - 22



BULKHEADS Pg 27



Size: 800 x 383 x 145mm


Matching Power: 80W / 150W / 200W

Material: The housing is made of high pressure, high strength die-cast aluminium, and resists high temperature. With a high purityaluminium reflector and an arc shaped tempered glass lens.Applicable Height: 12m

Application areas: Applicable to the lighting of highways, commercialstreets, Car Parks.



Size: 935 x 400 x 245mm


Marching Power: 80W / 150W / 200W

Material: The housing is made of high-pressure die-cast aluminium.The high-purity aluminium reflector provides optimal light distribution,complete with arc shaped tempered glass lens.Applicable Height: 12m

Application areas: Applicable to the lighting of highways, commercialstreets, Car Parks.

Pg 07


10/32

Pg 08

Street light illumination is the most important insurance on traffic safety, improvingtraffic efficiency and improving the environment. As for the illumination design ofthe street light, there is more emphasis on the illumination intensity, safety, liability,

energy saving, ease of maintenance and advanced technology.

Before upgrading After upgrading

High Pressure Sodium Induction Lamp

Light Power Qty Power Qty

400W 1280 Set 200W 1280 Set

Installation height 12.5m 12.5m

Illumination 33 lux 29 luxConsumption 184,320kwh/m 92,160lwh/m

Usage 12h/day 2,211,840kwh/y 1,105,920kwh/y

Energy Conservation 1,105,920kwh/y

Electricity Fee according AUD $30,965/M AUD $15,483/M

0.8yuan/wh AUD $371,580/Y AUD $185,796/Y

Maintenance AUD $12,996/Y ZERO

Total AUD $384,576/Y AUD $185,796/Y

Total cost saving AUD $198,780/Y

Street light illumination is the most important insurance on traffic safety, improvingtraffic efficiency and improving the environment. As for the illumination design ofthe street light, there is more emphasis on the illumination intensity, safety, liability,

energy saving, ease of maintenance and advanced technology.


High Pressure Sodium Induction Lamp


400W 1280 Set 200W 1280 Set

Installation height 12.5m 12.5m

Illumination 33 lux 29 luxConsumption 184,320kwh/m 92,160lwh/m

Usage 12h/day 2,211,840kwh/y 1,105,920kwh/y

Energy Conservation 1,105,920kwh/y


0.8yuan/wh AUD $371,580/Y AUD $185,796/Y


Total AUD $384,576/Y AUD $185,796/Y


Pg 08


11/32

Pg 09

Size: 620 x 400 x 175mm



Material: This luminaire is made of high intensity die-cast aluminiumshell, with external electro-static painted thermoplastic, silicone seal

rubber gasket strip, waterproof and dustproof, with a pure aluminiumreflector.

Application areas: Applicable to the lighting of traffic tunnels, publicsquares, outdoor advertising, public parks, subways, mining sites.



Size: 555 x 280 x 150mm


Marching Power: 60W / 85 / 125W / 165W

Material: The housing is made of a die-cast aluminium structure, andis corrosion resistant, with a flat aluminium reflector, 5mm toughenedglass lens, rubber sealing gasket. It is waterproof and dustproof.

Application areas: Applicable to the lighting of traffic tunnels,squares, outdoor advertising, public parks, subways and mines.

Size: 620 x 400 x 175mm



Material: This luminaire is made of high intensity die-cast aluminiumshell, with external electro-static painted thermoplastic, silicone sealrubber gasket strip, waterproof and dustproof, with a pure aluminiumreflector.Application areas: Applicable to the lighting of traffic tunnels, publicsquares, outdoor advertising, public parks, subways, mining sites.



Size: 555 x 280 x 150mm


Marching Power: 60W / 85 / 125W / 165W

Material: The housing is made of a d ie-cast aluminium structure, andis corrosion resistant, with a flat aluminium reflector, 5mm toughenedglass lens, rubber sealing gasket. It is waterproof and dustproof.


Pg 09


12/32

Pg 010


Size: 750 x 320 x 160mm



Material: The anti-impact high pressure die-cast aluminium luminairehas the advantages of high temperature resistance, good weatherresistant performance, aesthetics and durability, high efficiency mirror

surface aluminium reflector, high reflectivity, high strength temperedglass lens.



Size: 750 x 320 x 160mm



Material: The anti-impact high pressure die-cast aluminium luminairehas the advantages of high temperature resistance, good weatherresistant performance, aesthetics and durability, high efficiency mirror

surface aluminium reflector, high reflectivity, high strength temperedglass lens.Application areas: Applicable to the lighting of traffic tunnels,squares, outdoor advertising, public parks, subways and mines.

Pg 10


13/32

Pg 011

Illumination inside the tunnel could be adjusted according to different illuminationrequirements under different environments and traffic volumes in different districts.By controlling the illumination, drivers will become accustomed to the variation oflight intensity inside and outside the tunnel, being free from obstacles caused byvariation of light intensity. On the one hand the illumination requirement has beenmet and on the other hand, the traffic safety is ensured.


Metal Halide Lamp Induction Lamp


250W 580 Set 125W 580 Set

Installation height 8m 8m

Illumination 230 lux 260 luxConsumption 104,400kwh/m 52,200kwh/m

Usage 12h/day 1,252,800kwh/y 626,400kwh/y

Energy Conservation 626,400kwh/y

Electricity Fee according AUD $17,539/M AUD $ 8,770/M

0.8yuan/wh AUD $210,468/Y AUD $105,240/Y


Total AUD $ 216,357/Y AUD $105,240/Y

Total cost saving AUD $ 111,117/Y

Illumination inside the tunnel could be adjusted according to different illuminationrequirements under different environments and traffic volumes in different districts.By controlling the illumination, drivers will become accustomed to the variation oflight intensity inside and outside the tunnel, being free from obstacles caused byvariation of light intensity. On the one hand the illumination requirement has beenmet and on the other hand, the traffic safety is ensured.




250W 580 Set 125W 580 Set



Usage 12h/day 1,252,800kwh/y 626,400kwh/y


Electricity Fee according AUD $17,539/M AUD $ 8,770/M

0.8yuan/wh AUD $210,468/Y AUD $105,240/Y


Total AUD $ 216,357/Y AUD $105,240/Y

Total cost saving AUD $ 111,117/Y

Pg 11


14/32

Pg 012


Size: 425 x 429 x 145mm



Material: The housing is made of die-cast aluminium, with atoughened glass lens, with a facetted matt reflector.

Application areas: Applicable to the lighting of outdoor advertising,wharfs, squares and especially applicable to three-dimensional highrise architectural landscape lighting.

Size: 590 x 380 x 200mm



Material: This luminaire is made of die-cast aluminium, and is corrosionresistant and very durable. With a mirror reflector and tempered glasslens. High quality heat resistant silicone rubber seals. The ballast andlight source are installed separately, which effectively prolongs theservice life of them both.

Application areas: Applicable to large or small buildings, landscaping,parking lots, billboards, stadiums and other indoor and outdoorenvironments.



Size: 425 x 429 x 145mm



Material: The housing is made of die-cast aluminium, with atoughened glass lens, with a facetted matt reflector.Application areas: Applicable to the lighting of outdoor advertising,wharfs, squares and especially applicable to three-dimensional highrise architectural landscape lighting.

Size: 590 x 380 x 200mm



Material: This luminaire is made of die-cast aluminium, and is corrosionresistant and very durable. With a mirror reflector and tempered glasslens. High quality heat resistant silicone rubber seals. The ballast andlight source are installed separately, which effectively prolongs theservice life of them both.

Application areas: Applicable to large or small buildings, landscaping,parking lots, billboards, stadiums and other indoor and outdoorenvironments.


Pg 12


15/32

Pg 013


Size: 380 x 420 / 500 x 600mm



Material: The housing is made of a high intensity die-cast aluminium,shell, with external static thermal plastic spray-paint. Corrosion resis-tance, shock resistance and great durability.

Application areas: Applicable to illuminating in buildings, stadiums,squares, wharfs, scenic spots, and municipal brightening projects.

Size: 612 x 612 x 480mm


Matching Power: 200W / 300W

Material: This luminaire is made of impact resistant high pressure die-cast aluminium, and can stand high temperature with good weatherresistance performance, and is very durable. The highly efficient mirroraluminium reflector has high reflectivity and the high strength temperedglass boasts high transparency and impact resistance.

Application areas: Applicable to the lighting of traffic tunnels, subways,mines, sports stadiums.



Size: 380 x 420 / 500 x 600mm



Material: The housing is made of a high intensity die-cast aluminium,shell, with external static thermal plastic spray-paint. Corrosion resis-tance, shock resistance and great durability.

Application areas: Applicable to illuminating in buildings, stadiums,squares, wharfs, scenic spots, and municipal brightening projects.

Size: 612 x 612 x 480mm


Matching Power: 200W / 300W

Material: This luminaire is made of impact resistant high pressure die-cast aluminium, and can stand high temperature with good weatherresistance performance, and is very durable. The highly efficient mirroraluminium reflector has high reflectivity and the high strength temperedglass boasts high transparency and impact resistance.

Application areas: Applicable to the lighting of traffic tunnels, subways,mines, sports stadiums.


Pg 13


16/32

Pg 014

Size: 620 x 430mm



Material: This luminaire is made of high intensity die-cast aluminiumcovers with external static thermal plastic spray-paint.

Application areas: Applicable to the lighting in residential areas, publicpark, courtyard, squares, pedestrian streets.

Dimensions

Dimensions

Size: 600 x 580mm



Material: The housing is made of galvanized iron. The surface of theluminaire is powder coated with high quality outdoor fluorine carbonlacquer. It has a stylistic design, with easy installation.

Application areas: Applicable to illuminating public parks, villas,town houses, developments, pedestrian street, residential community.

Size: 620 x 430mm



Material: This luminaire is made of high intensity die-cast aluminiumcovers with external static thermal plastic spray-paint.

Application areas: Applicable to the lighting in r esidential areas, publicpark, courtyard, squares, pedestrian streets.

Dimensions

Dimensions

Size: 600 x 580mm



Material: The housing is made of galvanized iron. The surface of theluminaire is powder coated with high quality outdoor fluorine carbonlacquer. It has a stylistic design, with easy installation.

Application areas: Applicable to illuminating public parks, villa s,town houses, developments, pedestrian street, residential community.

Pg 14


17/32

Pg 015

Landscape lighting should create a comfortable, pleasant environment. By applyingdifferent materials, making use of variation and comparisons of colours. It wouldestablish a casual atmosphere.




250W 460 Set 125W 460 Set



Usage 12h/day 496,800kwh/y 248,400kwh/y



0.8yuan/wh AUD $83,460/Y AUD $41,731/Y


Total AUD $88,131/Y AUD $41,731/Y


Landscape lighting should create a comfortable, pleasant environment. By applyingdifferent materials, making use of variation and comparisons of colours. It wouldestablish a casual atmosphere.




250W 460 Set 125W 460 Set






0.8yuan/wh AUD $83,460/Y AUD $41,731/Y


Total AUD $88,131/Y AUD $41,731/Y


Pg 15


18/32

Size: 500 x 460mm


Material: The control gear housing is made of a high intensity die-castaluminium shell with external static thermal plastic spray-paint. With ahigh polished facetted aluminium reflector which has properties of goodradiance, corrosion resistance, shock resistance and great durability.


Application areas: It is especially applicable to illumination in factories,workshops, warehouses, storage facility.

Dimensions

Dimensions

Size: 300 x 430mm


Material: The control gear housing is made of a high intensity die-castaluminium shell with external static thermal plastic spray-paint with apolished aluminium reflector which gives a good reflective broadirradiation range.

Applicable Height: 3m ~ 6m Application areas: It is especially applicable to illumination in facto-ries, workshops, warehouses, storage facility.

Light distribution curve


Optional Accessories: Wireguard / Glass Lens

Size: 500 x 460mm


Material: The control gear housing is made of a h igh intensity die-castaluminium shell with external static thermal plastic spray-paint. With ahigh polished facetted aluminium reflector which has properties of goodradiance, corrosion resistance, shock resistance and great durability.



Dimensions

Dimensions

Size: 300 x 430mm


Material: The control gear housing is made of a high intensity die-castaluminium shell with external static thermal plastic spray-paint with apolished aluminium reflector which gives a good reflective broadirradiation range.

Applicable Height: 3m ~ 6mApplication areas: It is especially applicable to illumination in facto-ries, workshops, warehouses, storage facility.



Optional Accessories: Wireguard / Glass Lens

Pg 16


19/32

Size: 470 x 580mm


Material: The control gear housing is made of a high intensity die-castaluminium shell with external static thermal plastic spray-paint. With ahigh polished facetted aluminium reflector which has properties of goodradiance, corrosion resistance, shock resistance and great durability.




Dimensions

Size: 384 x 472mm


Material: The control gear housing is made of a high intensity die-castaluminium shell with external static thermal plastic spray-paint with amatt aluminium reflector.


Application areas: It is especially applicable to illumination in facto-ries, workshops, warehouses, storage facility.


Size: 470 x 580mm


Material: The control gear housing is made of a h igh intensity die-castaluminium shell with external static thermal plastic spray-paint. With ahigh polished facetted aluminium reflector which has properties of goodradiance, corrosion resistance, shock resistance and great durability.




Dimensions

Size: 384 x 472mm


Material: The control gear housing is made of a high intensity die-castaluminium shell with external static thermal plastic spray-paint with amatt aluminium reflector.Applicable Height: 4m ~ 8m

Application areas: It is especially applicable to illumination in facto-ries, workshops, warehouses, storage facility.


Pg 17


20/32

Dimensions

Size: 480 x 580mm


Material: The High strength die-cast aluminium housing with a highpurity aluminium reflector. Is also available with a bottom glass coverlens.


Application areas: It is especially applicable to illumination infactories, workshops, warehouses and storage facility.


Size: 480 x 580mm


Material: The High strength die-cast aluminium housing with a highpurity aluminium reflector. Is also available with a bottom glass coverlens.Applicable Height: 7m ~ 15m

Application areas: It is especially applicable to illumination infactories, workshops, warehouses and storage facility.


Pg 18


21/32

Mining and Industrial sites usually have a broad space and operating 24hrs a day.Its illumination system is usually large and is constantly in operation. Under acomfortable lighting environment, workers could be free from distraught feelings andstrong lights which causes low efficiency and increase accident rate.




250W 600 Set 125W 600 Set

Installation height 10m 10mIllumination 130 lux 155 lux

Consumption 72,000kwh/m 36,000kwh/m




0.8yuan/wh AUD $145,152/Y AUD $72,576/Y


Total AUD $151,244/Y AUD $72,576/Y


Mining and Industrial sites usually have a broad space and operating 24hrs a day.It s illumination system is usually large and is constantly in operation. Under acomfortable lighting environment, workers could be free from distraught feelings andstrong lights which causes low efficiency and increase accident rate.




250W 600 Set 125W 600 Set






0.8yuan/wh AUD $145,152/Y AUD $72,576/Y


Total AUD $151,244/Y AUD $72,576/Y


Pg 19


22/32

Dimensions

Size: 445 x 410mm


Material: The control gear housing is made of a high intensity die-castaluminium shell with external static thermal plastic spray-paint with apolycarbonate reflector and optional polycarbonate bottom cover lens .


Application areas: It is especially applicable to illumination in publicplaces like shopping centres, supermarkets,

Size: 470 x 580mm


Material: The control gear housing is made of a high intensity die-cast

aluminium shell with external static thermal plastic spray-paint. With ahigh polished facetted aluminium reflector which has properties of goodradiance, corrosion resistance, shock resistance and great durability.



Dimensions



Dimensions

Size: 445 x 410mm


Material: The control gear housing is made of a high intensity die-castaluminium shell with external static thermal plastic spray-paint with apolycarbonate reflector and optional polycarbonate bottom cover lens.Applicable Height: 3m ~ 7m

Application areas: It is especially applicable to illumination in publicplaces like shopping centres, supermarkets,

Size: 470 x 580mm


Material: The control gear housing is made of a h igh intensity die-cast

aluminium shell with external static thermal plastic spray-paint. With ahigh polished facetted aluminium reflector which has properties of goodradiance, corrosion resistance, shock resistance and great durability.



Dimensions



Pg 20


23/32

Dimensions

Size: 410mm


Material: The control gear housing is made of a high intensity die-castaluminium shell with commercial powdercoat and with a very durablematt reflector and adjustable locking knuckle for directing the light atdifferent angles.

Applicable Height: 4m ~ 7m Application areas: It is especially applicable to illumination in work-shops, conference room, theatres, school halls, supermarkets andshopping centres,.

Size: 420 x 530mm


Material: The control gear housing is made of a high strength and

intensity die-cast aluminium shell powdercoated. With a high polishedfacetted aluminium reflector



Dimensions



Dimensions

Size: 410mm


Material: The control gear housing is made of a high intensity die-castaluminium shell with commercial powdercoat and with a very durablematt reflector and adjustable locking knuckle for directing the light atdifferent angles.

Applicable Height: 4m ~ 7mApplication areas: It is especially applicable to illumination in work-shops, conference room, theatres, school halls, supermarkets andshopping centres,.

Size: 420 x 530mm


Material: The control gear housing is made of a high strength and

intensity die-cast aluminium shell powdercoated. With a high polishedfacetted aluminium reflector



Dimensions



Pg 21


24/32

While the development of large sized comprehensive supermarkets is becoming the

main stream, how to balance illumination data and calculating appropriate designswould be a problem that markets are currently facing. To choose an excellentillumination product not only stimulates customers desire to buy, but also reducesthe power consumption and air conditions additional thermo loss caused by theheat of light source substantially. This is inturn could reduce the overall operatingcost for the market.


Compact FluorescentLamp Induction Lamp


60W 750 Set 30W 750 Set





Electricity Feeaccording AUD $3,628/M AUD $1,814/M

0.8yuan/wh AUD $43,536/Y AUD $21,772/Y


Total AUD $46,997/Y AUD $21,772/Y


While the development of large sized comprehensive supermarkets is becoming the

main stream, how to balance illumination data and calculating appropriate designswould be a problem that markets are currently facing. To choose an excellentillumination product not only stimulates customers desire to buy, but also reducesthe power consumption and air conditions additional thermo loss caused by theheat of light source substantially. This is inturn could reduce the overall operatingcost for the market.


Compact FluorescentLamp Induction Lamp


60W 750 Set 30W 750 Set





Electricity Feeaccording AUD $3,628/M AUD $1,814/M

0.8yuan/wh AUD $43,536/Y AUD $21,772/Y


Total AUD $46,997/Y AUD $21,772/Y


Pg 22


25/32

Dimensions

Size: 240 x 235mm

Marching Power: 20W / 30W

Material: The main body of the down light is made of a full aluminiumstructure. The high purity alumina reflector provides the best lightdistribution . Together with the induction lamp it has the advantages ofhigh light efficiency, long service life, good colour rendering perform-ance, stable light, no flickering, mild light, energy saving and givesgood protection for your eyes.Application areas: It is especially applicable to Indoor Lighting ofshopping malls, supermarkets, hotels, offices, meeting rooms, depart-ment stores, exhibition centres, villas, etc.

Size: 225mm x 228mm


Material: The main body of the lamp is made of good quality aluminium,

powdercoated with a high purity alumina reflector, has simple structureand is aesthetic and durable. Working together with the induction lamp ithas the advantages of high light efficiency, long service life, good colourrendering performance, stable light, no flickering, mild light, energysaving and gives good protection for your eyes.

Application areas: It is especially applicable to Indoor Lighting of shop-ping malls, supermarkets, hotels, offices, meeting rooms, departmentstores, exhibition centres, villas, etc.

Dimensions



Dimensions

Size: 240 x 235mm

Marching Power: 20W / 30W

Material: The main body of the down light is made of a full aluminiumstructure. The high purity alumina reflector provides the best lightdistribution . Together with the induction lamp it has the advantages ofhigh light efficiency, long service life, good colour rendering perform-ance, stable light, no flickering, mild light, energy saving and givesgood protection for your eyes.Application areas: It is especially applicable to Indoor Lighting ofshopping malls, supermarkets, hotels, offices, meeting rooms, depart-ment stores, exhibition centres, villas, etc .

Size: 225mm x 228mm


Material: The main body of the lamp is made of good quality aluminium,

powdercoated with a high purity alumina reflector, has simple structureand is aesthetic and durable. Working together with the induction lamp ithas the advantages of high light efficiency, long service life, good colourrendering performance, stable light, no flickering, mild light, energysaving and gives good protection for your eyes.

Application areas: It is especially applicable to Indoor Lighting of shop-ping malls, supermarkets, hotels, offices, meeting rooms, departmentstores, exhibition centres, villas, etc .

Dimensions



Pg 23


26/32

Dimensions

Size: 240 x 235mm


Material: Australian Made The frame is made of metal and ispowder coated in white complete with a matt reflector and twist lockfront cover glass lens.

Application areas: It is especially applicable to Indoor Lighting of

shopping malls, supermarkets, hotels, offices, meeting rooms, depart-ment stores, exhibition centres, villas, etc.

Size: 225mm x 228mm


Material: Australian Made The frame is made of metal and ispowder coated in white complete with a facetted reflector and whitetrim .

Application areas: It is especially applicable to Indoor Lighting of shop-ping malls, supermarkets, hotels, offices, meeting rooms, departmentstores, exhibition centres, villas, etc.


* Available with a clear or frost glass lens .

Dimensions

Size: 240 x 235mm


Material: Australian Made The frame is made of metal and ispowder coated in white complete with a matt reflector and twist lockfront cover glass lens.Application areas: It is especially applicable to Indoor Lighting of

shopping malls, supermarkets, hotels, offices, meeting rooms, depart-ment stores, exhibition centres, villas, etc .

Size: 225mm x 228mm


Material: Australian Made The frame is made of metal and ispowder coated in white complete with a facetted reflector and whitetrim .

Application areas: It is especially applicable to Indoor Lighting of shop-ping malls, supermarkets, hotels, offices, meeting rooms, departmentstores, exhibition centres, villas, etc .


* Available with a clear or frost glass lens .

Pg 24


27/32







HIGHBAYS Pg 16 - 22



BULKHEADS Pg 27



Dimensions

Size: 600 x 600 x 240mm


Material: The recessed body of this luminaire is made of highintensity die-cast aluminium, and powder coated in white. Completewith a prismatic PVC diffuser and integral control gear.Applicable Height: 2m ~ 6m

Application areas: It is especially applicable to illumination in theoffice, exhibition room, library, shopping mall, supermarket.

Size: 585 x 585 x 230mm / 460 x 460 x 230mm


Material: The main body of this luminaire is made of high intensity die-cast aluminium, and powder coated in white. Complete with a prismaticPVC diffuser and integral control gear.Applicable Height: 2m ~ 6m

Application areas: It is especially applicable to illumination in theoffice, exhibition room, library, shopping mall, supermarket.

Dimensions



Pg 25


28/32

Office hours are during daytime, so we combined the arti ficial illumination withnatural light to establish a pleasant illuminated environment.


Grille lamp Induction Lamp


108W 280 Set 85W 100 Set


Illumination 300 lux 350 lux




Electricity Fee according AUD $1,132/M AUD $342/M

0.8yuan/wh AUD $13,584/Y AUD $4,104/Y


Total AUD $15,307/Y AUD $4,104/Y


Office hours are during daytime, so we combined the artificial illumination withnatural light to establish a pleasant illuminated environment.


Grille lamp Induction Lamp


108W 280 Set 85W 100 Set


Illumination 300 lux 350 lux




Electricity Fee according AUD $1,132/M AUD $342/M

0.8yuan/wh AUD $13,584/Y AUD $4,104/Y


Total AUD $15,307/Y AUD $4,104/Y


Pg 26


29/32

Dimensions

Size: 520 x 520 x 210mm

Marching Power: 60W / 85W / 125W / 165W / 200W

Material: Hi intensity, shock resistance, fire standing, corrosion resis-

tance, good insulativity; it has adopted prism refractive technique toproduce high purity aluminium plate, separating electrical fittings. Ithas broad range of irradiation and reflectivity.


Application areas: It is especially applicable to strong illuminationlike gas station and bus station.


Size: 520 x 520 x 210mm

Marching Power: 60W / 85W / 125W / 165W / 200W

Material: Hi intensity, shock resistance, fire standing, corrosion resis-

tance, good insulativity; it has adopted prism refractive technique toproduce high purity aluminium plate, separating electrical fittings. Ithas broad range of irradiation and reflectivity. Applicable Height: 2m ~ 10m

Application areas: It is especially applicable to strong illuminationlike gas station and bus station.


Pg 27


30/32







HIGHBAYS Pg 16 - 22



BULKHEADS Pg 27



Dimensions

Size: 550 x 240mm



Material: Glass lampshade, cast aluminium alloy seal ring, water anddust proofing and fastened by an eyebolt.Application areas: It is especially applicable to illumination in factory,workshop, shopping mall, supermarket etc..

Size: 470 x 230mm


Material: It consists of die-casting aluminium alloy shell and hardtransparent cover after siliconization and bosonization. It has adoptedwing nut and bolt to fasten for easier uncapping, which realizes fastuncapping.Applicable Height: 2m ~ 6m

Application areas: It is especially applicable to explosive gaspenvironment.

Dimensions



Pg 28


31/32

PROJECTS GALLERY

Large Supermarket Workshop of Ceramic Factory

Main Street Lighting Warehouse Complex

Badminton Venue Enterprise Office

PROJECTS GALLERY

Large Supermarket Workshop of Ceramic Factory

Main Street Lighting Warehouse Complex

Badminton Venue Enterprise Office

Pg 29


32/32

We Are Committed To Saving The EnvironmentAre You Committed?

We Are Committed To Saving The Environment Are You Committed?

Lampart Inductive Lightning Catalogue

Documents

Transcript of Lampart Inductive Lightning Catalogue