LADDER SAFETY SYSTEMS Stainless-Steel Cable
Transcript of LADDER SAFETY SYSTEMS Stainless-Steel Cable
www.safekeepersafety.com | 866-537-2262 Meets applicable ANSI & OSHA standards
LADDER SAFETY SYSTEMSStainless-Steel Cable
Shock AbsorberPN7000(02)-SK
�Material: stainless steel 316 �Limits the impact of force in the event of fall to less than 6 kN (1,349 lbs)
Wire Rope (Cable Wire)PN9XXXSL-SK
�Material: stainless steel 316 �Diameter: 8 mm (0.31 in) �Construction: 7 x 19
IntermediatePN2001(04)-SK
�Material: stainless steel 316 �Recommended installation: every 10 m (33 ft)
Wire Rope CapPN7000(12)-SK
�Material: aluminum alloy
Inspection PlatePN8000(09)-SK
�For ID and maintenance of implementation records
Mounting BracketPN7000(01)-SK
�Material: stainless steel 316 �Breaking strength > 23 kN (5,171 lbs)
Rope GrabRG02(112)-SK
�Material of rope grab: stainless steel 316 �Material of carabiner: alloy steel �Anti-inversion mechanism
U-Bolts & ThimblePN6000(01)-SK
�Includes 2 u-bolts and 1 thimble �Material: stainless steel 316
TensionerPN7000(05)-SK
�Material: stainless steel 316 �Regulates cable tension �Equipped with a tension indicator
PN7000-SK – Fixed Cable Line System � Vertical anchorage line made of stainless steel wire rope installed on a ladder using mounting brackets � Easy to install permanent stainless steel shock absorber for resistance to harsh climate conditions � Intermediates to reduce vibration and proper alignment of wire rope at every 10 m (33 ft) � Stainless steel rope grab moves up and down with the user and locks them in case of fall
Optional Extension ArmPN7000(06)-SK
�Length: 83 in
www.safekeepersafety.com | 866-537-2262 Meets applicable ANSI & OSHA standards
LADDER SAFETY SYSTEMS
PN8000-SK – Fixed Rail Line System � Gliding vertical guide rail over with guided-type fall arrest trolley � Trolley moves up and down with the user and locks them in case of fall � Corrosion-free, anodized, aluminum-alloy rail
Aluminum ExtensionPN8000(02)-SK
�Material: extruded aluminum alloy �Length: 1.5 m (59 in)
Aluminum Rail IntermediatePN5000(01)-SK
�Material: extruded aluminum alloy �Length: 3 m (118 in)
Vertical TrolleyPN8000(01)-SK
�Material: stainless steel 316 trolley with brass wheel provides frictionless movement �Anti-inversion pin
Aluminum Rail ExtremityPN5000(02)-SK
�Material: extruded aluminum alloy �Locking jib to prevent unintentional release of trolley from the rail �Length: 3 m (118 in)
JunctionPN5000(08)-SK
�Material: stainless steel 316 �Used to connect 2 rails together
CarabinerPN111-SK
�Material: alloy steel �Quarter-turn, auto-locking, steel carabiner
Rung ClampPN8000(03)-SK
�Material: stainless steel 316 �Clamps system to the ladder
Inspection PlatePN8000(09)-SK
�For ID and maintenance of implementation records
Aluminum-Alloy Rail