LabVIEW Embedded Module for ARM Microcontrollers

• The NI LabVIEW Embedded Module for ARM Microcontrollers offers a comprehensive graphical environment for programming the world's most popular embedded 32-bit RISC processor. Jointly developed by NI and ARM, the software seamlessly integrates LabVIEW embedded technology and the ARM RealView development environment to provide an out-of-the-box embedded programming experience for targeting ARM7 and ARM9 family and Cortex-M3 microcontrollers.

•  • Package Contents• -LabVIEW• - LabVIEW Embedded Module for ARM Microcontrollers• - RealView Microcontroller Development Kit (MDK)• - Keil ULINK2 USB-JTAG Adapter• - Development Board• - Getting Started with the Embedded Module for ARM

Micocontrollers

• 제품 구매정보http://sine.ni.com/nips/cds/view/p/lang/ko/nid/205040

• 평가 소프트웨어 다운로드 http://joule.ni.com/nidu/cds/view/p/id/1371/lang/ko

• 더 많은 정보 알아보기http://www.ni.com/labview/arm/ko/

Luminary Micro LM3S8962 Eval-uation Board

• Microcontroller Manufacturer: Luminary Micro• Evaluation Board Manufacturer: Luminary Micro• Processor Type: ARM Cortex-M3 LM3S8962• Evaluation Board features:• 1 CAN interface• SD Card interface• OLED graphics display with 128 x 96 pixel resolution• User LED, navigation switches, and select pushbuttons• Ethernet• Analog Input• Processor Specifications:• 256KB Flash ROM• 64KB SRAM• 50MHz• 6 Motion Control PWM• Ethernet MAC + PHY• 1 CAN• 1 UART • 8 10-bit ADC• 1 Analog Comparator • 38 GPIO Pins• Related LM3S8962 Links• Evaluation Board Information http://www.ti.com/tool/ek-lm3s8962• Processor Overview http://www.keil.com/dd/chip/4285.htm• Full Processor Specifications http://www.keil.com/dd/docs/datashts/luminary/lm3s8962.pdf

Keil MCB2300 Evaluation Board

• Microcontroller Manufacturer: NXP• Evaluation Board Manufacturer: Keil• Processor Type: ARM7 NXP LPC2378• Evaluation Board features:• 2 Serial interfaces• Speaker• Analog Input (via potentiometer)• 2 CAN interfaces• LCD• USB• Ethernet• 8 LEDs• Processor Specifications:• 512KB on-chip Flash ROM• 58KB RAM• CPU clock up to 72 MHz• Ethernet 10/100 MAC with DMA• External Memory Controller for static devices such as Flash and SRAM• USB 2.0 Full Speed Device Controller• CAN 2.0B with two channels• 4 UARTs• 3 I2C serial interfaces• 3 SPI/SSP serial interfaces• SD/MMC memory-card interface• 10-bit ADC with 8 channels• 10-bit DAC• PWM unit for three-phase motor control• General purpose I/O pins• Related MCB2300 Links• Evaluation Board Information http://www.keil.com/mcb2300/• Processor Overview http://www.keil.com/dd/chip/4153.htm• Full Processor Specifications http://www.keil.com/dd/docs/datashts/philips/lpc2378_ds.pdf

LabVIEW 를 이용한 ARM 마이크로컨트롤러 제어

• LabVIEW 환경에서 ARM 마이크로 컨트롤러 제어

• ARM7, ARM9, Cortex-M3 마이크로 컨트롤러에 사용가능

• Luminary Micro, NXP 평가보드의 Ethernet, CAN, SD Card, Dis-play, Analog Input/ Output, GPIO, LED, UART 등을 LabVIEW 함수로 제어

• 기본적인 LabVIEW 프로그램에 대한 지식을 갖고 , 직접 하드웨어 레벨의 ARM 마이크로 컨트롤러를 제어할 수 있게 함