Laboratory Pad Steam Range Laboratory Pad Steam Range New special design for short distance in...
1
PS-J Laboratory Pad Steam Range New special design for short distance in between the padding rollers and the entry to the Steaming Chamber. Much easier Pick-Up for higher percentage than the PT-J. Adjustable fabric speed control, standard dwell time inside the steaming chamber from 20-90 seconds also with digital indication. Padding roller pressure adjustable independently on RHS/LHS; permanently constant nip pressure thanks to the pneumatic design. Safety devices include a safety rod in between the padding rollers plus an emergency touch ON/OFF button which willautomatically stop the machine as well as release both padding rollers. Short distance between the padding rollers and the entry to the steaming chamber excellent reproducibility especially on Sulphur & Vat dyes. Except for the least minor parts, the machine is of all stainless steel manufacture. PS-J 65 / 2, 14th Lane, off. Khayaban-e-Badban, Phase 7, DHA, Karachi - Pakistan. Ph.#: +92-21-35311025, 35311074, Fax#: +92-21-35310945 TechnicalColor Solution www.tec-color.com ■ Suitable for carrying out all PAD STEAM processes with saturated steam. ■ Offers the shortest distance between padding mangle and steaming chamber. ■ Much easier Pick-Up for higher percentage than the PT-J. ■ Complete with sight glass for easy observation inside the steaming chamber. ■ Least percentage Pick-Up for 60% for 100% cotton, 45% for 65/35% polyester/cotton, 25% for taffeta. Specifications PS-J Vertical padding mangle, roller diameter 125mm and 300mm effective working width. Roller Dimension Padding Rollers Roller Pressure Speed Steam Trap Steam Generator Guide Roller Main Drive N.B.R. rubber material of 70°shore hardness ±5 Pneumatically-Controlled padding roller pressure stays constant at all time. Maximum pressure 6kg/cm. Accessories include Air Filter, Pressure Regulating Valves (JAPAN). Frequency inverter Made in Japan "MIYAWAKI " Brand, float-actuated FUO type. Optional SUS304 stainless steel made and covered with Teflon tube, no dyestuff contamination is assured. 3-Phase 6-pole motor of TECO Brand (380 x 3PH x 50HZ) Dwell Time Temperature Range Speciality Steam Consumption Fluid Beck Working Witdh 20-90 seconds with digital display 98°C- 102°C, Digital display New special design for short distance in between the padding rollers and the entry to the Steaming Chamber 5 kg/hour for indirect steam,15 kg/hour for direct steam about 1000cc capacity Max. 600mm (on request)
Transcript of Laboratory Pad Steam Range Laboratory Pad Steam Range New special design for short distance in...
PS-J
Laboratory
Pad Steam RangeNew special design for short distance in between the padding rollers and the entry to the Steaming Chamber. Much easier Pick-Up for higher percentage than the PT-J. Adjustable fabric speed control, standard dwell time inside the steaming chamber from 20-90 seconds also with digital indication. Padding roller pressure adjustable independently on RHS/LHS; permanently constant nip pressure thanks to the pneumatic design. Safety devices include a safety rod in between the padding rollers plus an emergency touch ON/OFF button which willautomatically stop the machine as well as release both padding rollers. Short distance between the padding rollers and the entry to the steaming chamber excellent reproducibility especially on Sulphur & Vat dyes. Except for the least minor parts, the machine is of all stainless steel manufacture.
PS-J
65 / 2, 14th Lane, off . Khayaban-e-Badban, Phase 7, DHA, Karachi - Pakistan.
Ph.#: +92-21-35311025, 35311074, Fax#: +92-21-35310945
TechnicalColorSolution
w w w . t e c - c o l o r . c o m
■ Suitable for carrying out all PAD STEAM processes with saturated steam.■ Offers the shortest distance between padding mangle and steaming chamber.■ Much easier Pick-Up for higher percentage than the PT-J.■ Complete with sight glass for easy observation inside the steaming chamber.■ Least percentage Pick-Up for 60% for 100% cotton, 45% for 65/35% polyester/cotton, 25% for taffeta.
Specifications PS-JVertical padding mangle, roller diameter 125mm
and 300mm effective working width.Roller Dimension
Padding Rollers
Roller Pressure
Speed
Steam Trap
Steam Generator
Guide Roller
Main Drive
N.B.R. rubber material of 70°shore hardness ±5
Pneumatically-Controlled padding roller pressure stays constant at alltime. Maximum pressure 6kg/cm. Accessories include Air Filter,
Pressure Regulating Valves (JAPAN).Frequency inverter
Made in Japan "MIYAWAKI " Brand, float-actuated FUO type.
OptionalSUS304 stainless steel made and covered
with Teflon tube, no dyestuff contamination is assured.3-Phase 6-pole motor of TECO Brand (380 x 3PH x 50HZ)
Dwell Time
Temperature Range
Speciality
Steam Consumption
Fluid Beck
Working Witdh
20-90 seconds with digital display
98°C- 102°C, Digital displayNew special design for short distance in between the padding rollers
and the entry to the Steaming Chamber5 kg/hour for indirect steam,15 kg/hour for direct steam
about 1000cc capacity
Max. 600mm (on request)
