Limos Dublin | Limo Hire Dublin | Silver Limousines Dublin | kpcdlimos.ie
LABBOX: GENERAL INTRODUCTION Dublin, 16th May 2014 Distribution in Ireland.
-
Upload
kaleigh-fairbanks -
Category
Documents
-
view
216 -
download
2
Transcript of LABBOX: GENERAL INTRODUCTION Dublin, 16th May 2014 Distribution in Ireland.
LABBOX: GENERAL INTRODUCTION
Dublin, 16th May 2014
Distribution in Ireland
WHO IS LABBOX?
2006
2011
201020092007 2008
2012 2013
Basic labware at basic prices supplierIncorporated September 14, 2005Offices and warehouse located in Mataró (at 40 km north Barcelona)Shareholders: Juan R. Jiménez (General Manager, Chemical Engineer-MBA) and Mónica San Martín (President, Business Angel-Private investor)Sales activity since March 2006Product range: 4000 references (glassware, porcelain, plasticware, metalware, small equipment, reagents...), 90% of them with labbox brandingSubsidiary office in France and distributors in 70 countries
2014
our company
our company MILESTONES
09/2005 Company incorporation01/2006 5 employees
03/2006 First catalogue launch (200 references)
03/2006 First customer, first order10/2006 First distributor outside Spain : Portugal
09/2007 First personalized catalogue for Portugal10/2008 First tradeshow booth : Expoquimia 2008
(Barcelona)
11/2008 1000 customers in Spain06/2009 Subsidiary office in France
our company MILESTONES
08/2009 Moving to new warehouse (1100 m2) 09/2009 First launch of our France catalogue
06/2010 First tradeshow outside Spain: Forum Labo 2010 (Paris)
10/2010 2000 customers in Spain02/2011 First catalogue in English02/2011 Launch of our Export Department
our company MILESTONES
03/2011 First tradeshow outside Europe : Arablab 2011 (Dubai)
06/2011 First catalogue of lab chemicals (Labkem brand)
03/2012 Distributors in 50 countries (now 70)12/2012 40% of the turnover is done outside Spain11/2012 25 employees
02/2013 Launch of LBX Instruments
MILESTONES
Morocco
Sweden, Norway
Benelux
Portugal
Swizterland
01/2014 12 versions of our catalogue (personalized with End-user prices for Spain, France, Switzerland, Morocco, Benelux, Scandinavia)
our company
customers OUR DISTRIBUTORS
Active distributors worldwide
glassware BOROSILICATE GLASS 3.3
LBG 3.3 is a borosilicate glass with a minimum content in silica of 80% and a low expansion coefficient (3.3•10-6 K-1) included in the 3.3 borosilicate group, as defined in ISO 3585 standard.It is used in products where chemical and mechanical resistance is to be combined with resistance to sudden temperature changes. This particular combination of properties makes this type of glass the most used in labware.
Physical and chemical propertiesLinear expansion coefficient (@ 20/300 ºC) 3.3•10-6 K-1Strain point 520 ºCAnnealing point 560 ± 10 ºCSoftening point 820 ± 10 ºCDensity 2.23 ± 0.02 g/cm3Hydrolytic resistance (according to ISO 719, water at 98 ºC) Class 1Hydrolytic resistance (according to ISO 720, water at 121 ºC) Class 1Resistance to acids (according to ISO 1776, DIN 12116) Class 1Resistance to alkalis (according to ISO 695) Class 2
Typical composition 80,4% in weight SiO213,0% in weight B2O3
4,2% in weight Na2O
2,4% in weight Al2O3
Technical specifications of LBG 3.3 glassware
glassware BOROSILICATE GLASS 3.3
Some examples of linear temperature expansion coefficient
Material •10-6 K-1
Ethanol 250Mercury 61Aluminum 23,1Silver 18Copper 16,6Gold 14Stainless steel 13Glassware (regular) 8,5Glassware (borosilicate) 3,3Diamond 1Quartz 0,33
What is a linear expansion coefficient?
TO REMEMBER
“Borosilicate 3.3” in a type of glass
All glassware manufacturers are using “Borosilicate 3.3”
“LBG 3.3” is the name of our LABBOX “Borosilicate 3.3” de LABBOX. It is our brand
GENERAL LABWAREour products
Products for routine applications in very different kind of laboratories (chemistry, life science, didactics, etc…) and not related with a particular
technique
Different materials…
borosilicate glass 3.3 borosilicate glass 3.3
polypropylene
PTFE
stainless steel
polypropylene
porcelain
soda glass
our products GENERAL LABWARE
Manufacturing Standards
Although the products seems very simple, manufacturing standards are to be followed, such as :
Beakers: DIN 12331, ISO 3819
Polypropylene beakers: ISO 7056
Erlenmeyers: DIN 12380, ISO 1773
our products GENERAL LABWARE
VOLUMETRIC MATERIALour products
Batch certificate is always available
Class A always available (some products as well Class B)
our products
ISO, DIN… are defining Class A and BUsually Class A tolerance is half of Class BMost of the labbox VOLUMETRIC MATERIAL is only available on Class A
VOLUMETRIC MATERIAL
our products
Batch number
VOLUMETRIC MATERIAL
Batch number
Standard reference
Test results
Nominal valueToleranceAverage value (batch)Standard deviation (batch)
our products VOLUMETRIC MATERIAL
Standard LineISO 1042DIN 12664Class ABorosilicate 3.3Batch certificate
our products
Premium LineISO 1042DIN 12664Class ABorosilicate 3.3 superiorBatch certificateBatch number engraved
Premium LineISO 1042DIN 12664Class ABorosilicate 3.3 amberBatch certificateBatch number engraved
Premium LineISO 1042DIN 12664USP (tolerance > ISO)“Eichordnung” (“H”)Class ABorosilicate 3.3 superiorBatch certificateBatch number engraved
Premium LineISO 1042DIN 12664USP (tolerance > ISO)Class ABorosilicate 3.3 superiorIndividual certificateIndividual number engraved
VOLUMETRIC MATERIAL
LIQUID HANDLINGour products
Instruments and consumables for laboratory liquid handling
LIQUID HANDLINGour products
EASY: our LABBOX brand of liquid handlingFrom the simple to the most sofisticated solution
EASY 5
EASY 9
EASY 8EASY 10
mini-micropipette
EASY 30+Fixed volume micropipette
EASY 40+Variable volume
micropipette
EASY 40 Smart
Variable volume micropipette
REVOLUTIONElectronic
micropipetteEASY 60+
Electronic filling device
EASY 20Bottle top dispenser
Standard Line tipsThe best price
our products
Premium Line tipsHuman DNA freeCertified DNAse, RNAse e PCRInhibitors freeDyes freeSterile and non-sterile available
LIQUID HANDLING
Premium Line tips with filterHuman DNA freeCertified DNAse, RNAse e PCRInhibitors freeDyes freeSterile and non-sterile available
our products LIQUID HANDLING
The sample retention within the tip is a important aspect of handling issues.
Usually technicians were applying silicon inside tips but this may give contamination problems.
labbox Premium Line ULR tips are manufactured with a new polymer (Novelle-Polypropylene) producing a slippery wall where no sample is retained . This polymer give a better performance once autoclaved.
This method reduce 85% the sample retention and lower in more than 75% the standard volume deviation.
They are specially recommended for molecular biology application, specially in DNA analysis, quantitative PCR and protein handling.
Available with filter and without filter.
Premium Line ULTRA LOW RETENTION tips:the best accuracy for critical molecular biology routine
JOINTED GLASSWAREour products
For organic synthesis techniques and other analytical techniques
FILTRATION AND SEPARATIONour products
Filter paper: LABBOX is associated with PRAT DUMAS, a French manufacturer with more than 100 years of
experience and an old paper mill dating 1309
FILTRATION AND SEPARATIONour products
FILTRATION AND SEPARATIONour products
FILTRATION, SEPARATION and CONCENTRATION
our products
Once the required quality is decided, you only need to define the diameter and to choose between flat or folded paper:
FILTRATION, SEPARATION and CONCENTRATION
our products
Special papers:
Glass microfiber paper:standard paper for determination of particle suspension (S.P.M.) in drinking or sewage water according to European standards (EN 872) and American standards (Standard Methods 2540D)
Phase separating paper:hydrophobic paper for the fast separation of aqueous solutions from hydrofuge solvents
Activated carbon filter paper:used to dispose benzene, toluene, xylene, ethyl benzene or other small organic molecules.
Blotting paper for germination tests:it allows to determine the capacity of germination of seeds.
Antibiotic control filter paper:used to determine the suitable antibiotic for a particular infection treatment.
Blaine test filter paper:Used to determine the fineness of cement according to EN 196-6:2010 standard.
FILTRATION, SEPARATION and CONCENTRATION
our products
LABBOX filtration unitsFor Ø 25 mm
+For Ø 90 mm
+
+
+
+
For Ø 47 mm
For Ø 47 mm
FILTRATION, SEPARATION and CONCENTRATION- VACUUM PUMP and EQUIPMENT -
our products
LABBOX is associated with the German manufacturer KNF LAB, one of the leading companies in laboratory vacuum pumps
All vacuum pumps are membrane pumps 100% oil free
FILTRATION, SEPARATION and CONCENTRATION- VACUUM PUMP and EQUIPMENT -
our products
Laboratory applications:Rotary evaporation, distillation, sublimation, vacuum dry, gel dry, vacuum filtration, pressure filtration, sample preparation, liquid dosage…
FILTRATION, SEPARATION and CONCENTRATION- VACUUM PUMP and EQUIPMENT -
our products
Depending the materials used for manufacturing, you will find different versions of the same pump
PPS pump-head and EPDM membrane:pump for neutral gases
PPS pump-head and PTFE-coated diaphragm:pump for slightly aggressive gases
PTFE pump-head and PTFE-coated diaphragm :pump for aggressive or corrosive gases
METALWARE and LABORATORY TOOLS
our products
Metalware, small tools and various items used on a daily basis at the laboratory: cutting tools, rods, spatulas, brushes, trays…
MICROBIOLOGY and PATHOLOGYour products
Petri dishesMicroscope slides and accessories
Reagents for biochemistry, histology dies…
MICROBIOLOGY and PATHOLOGYour products
Polystyrene disposable Petri dishes
- Available in 55, 90, 100, 120 and 150 Ø mm and square-shape 120 x 120 mm
- Aseptic or sterilized by irradiation- With our without vents (ventilation holes)- Without compartments or with 2/3 compartments- CE-IVD Marking (European directive for in-vitro
diagnostic products)- Non disposable glass Petri dishes are available
Sterilization certificate
CE Conformity Declaration
MICROBIOLOGY and PATHOLOGYour products
Microscope slides: 4 qualities to satisfy any kind of customers
BASIC LINEThe economic optionFor education and routine applications in veterinary, urine analysisClearglass, pre-cleanedCut or ground edges
STANDARD LINEThe quality/price optionFor all kind of applicationsClearglass, pre-cleanedCut or ground edges
PREMIUM LINESuperior quality at an affordable priceFor applications in pathology, histology, cytology, and other ones where a higher quality is requiredClearglass, pre-cleanedBeveled edges
SUPER WHITE LINEThe best quality: made of pure white glassFor the most for the most exigent applications in pathology, histology, cytology, etc.The composition of pure white glass with very low contents of iron, grants exceptional optical propertiesBeveled edges
MICROSCOPES and STEREOMICROSCOPES
our products
LABBOX is associated with MOTIC, a leader manufacturer of microscope components and equipments.
Motic have manufacturing plants and warehouses in Canada, Germany, Hong-Kong, Spain and United States
BOTTLES and SAMPLE CONTAINERSour products
In different kind of glass and plastic materialFrom 3,5 ml up to 50 l
Narrow mouth, wide mouth, screw cap, round shape, square shape, aseptic, sterile, sealable, with thiosulfate, transparent, etc…
…one kind of bottle for each application
BOTTLES and SAMPLE CONTAINERSour products
Laboratory bottle with ISO thread
Commonly used for microbiology culture media preparationMade of borosilicate glass 3.3Completely autoclavable at 140 ºC (caution: always autoclaving not screwing the cap)GL 45 thread, according to ISO 4796 (suitable for bottle dispensers such as EASY20 labbox or similar from other brands) Pouring ring and cap in blue PP, suitable up to 140 ºCFor higher temperatures (up to 200 ºC) a red ring made in PBTP and a red cap made in silicone-PTFE coated is availableFor photosensitive products, amber version is available
BOTTLES and SAMPLE CONTAINERSour products
Versatility: different bottles with PP28 thread to combine with different caps
Transparent glass
Amber glass Transparent PET
Amber PET
HDPE
+
Regular cap
Counter drop screw
Dropper screw cap
BOTTLES and SAMPLE CONTAINERSour products
Sealable bottles: to ensure the security of the samples
Bottles include a ring on the cap and on the bottleOnce closed, the sealing can only be opened if broken
Security sealing are available in plastic and stainless steel wireEach sealing have a single serial number printed
CHROMATOGRAPHY VIALSour products
Vials 12 x 32 mm (1,8-2 mL)Crimped or screw capTransparent or amber
You will find this kind of vial in the most common equipements such as:
Agilent (HP) 1050/1100/1200/1090/7673ACTC LC PAL, GC PAL and COMBI PALMerck-HitachiPerkin Elmer Autosystem/XL/Clarus/ISS 100/ISS 200/Integral 4000Shimadzu GC and LC autosamplersSparkThermo Scientific GC TRACE/AS3000/AI3000/AS800/TriPlus and HPLC SpectraSystem AS3500/AS3000/AS1000/Surveyor/AccelaVarian GC Autosamplers 8000/8100/8410 and LC Autosamplers 9090/9095/PROSTARWaters Alliance/Acquity
Nota: brands and models are indicated here as a reference. The same model may accept different types of vials racks and they are not always compatible with vials 12 x 32 mm
CENTRIFUGATION and TEST TUBESour products
LBX Instruments Brand
STIRRERS and ACCESSORIESour products
THERMOREGULATION, COMBUSTION and CALCINATION
our products
Porcelain crucibles: up to 1150 ºCQuartz crucibles: up to 1100 ºCAlumina crucibles: up to 1750 ºCPlatinum crucibles: up to 1700 ºC
THERMOREGULATION, COMBUSTION and CALCINATION
our products
Thermal Shock Resistance: Average coefficient of expansion from 20 ºC to 200 ºC is 3.56 x 10-5 , gradually increasing to 4.69 x 10-5 at 1000 ºC.To prevent thermal stress cracks on porcelain ware, labbox strongly recommends a heating/cooling rate not toexceed 200 ºC/hour.
Resistance to Chemical Action:The resistance to acids and alkalis is excellent, except for hydrofluoric acid.
Technical specifications of porcelain
Prolonging labware life:- Follow gradual heating and cooling rates.- Use an oven or hot plate as an intermediate step when quicker
heating/cooling rates are required.- Gradually increase flame intensity when using a gas burner.- Avoid contact of heated ware with a cold surface.- Carefully inspect your labware prior to each use- Do not use any product that appears defective.
THERMOREGULATION, COMBUSTION and CALCINATION
our products
Made of pure aluminum oxyde (AL2O3 at 99.6%)
Used in metallurgy and other fields where high temperatures combined with high chemical resistance are required.
It can be used in reducing or oxidizing atmospheres. Inert in hydrogen or carbonic atmospheres.
Suitable for melting glass, borosilicate glass included.
Recommended to with refractory metals such as molybdenum, platinum, tungsten, tantalum, rhodium and iridium. To avoid cracks due to thermal stress on alumina, labbox recommended the speed of warming / cooling does not exceed 150 ° C / hour.
Technical specifications of alumina
THANK YOU