lab companion

Laboratory Equipment • Heating Baths• Shaking Heating Baths• Viscometer Heating Baths• Heating Bath Circulators• Refrigerated & Heating Bath Circulators• Desiccators • Clean Benches• Ductless Fume Hoods• PCR Workstations• UV Sterilization Cabinets• General Incubators• Low Temperature Incubators• Incubated & Refrigerated & Illuminated Shakers• Forced / Natural Convection Ovens• Vacuum Ovens• Electrical Aspirator Pumps• Recirculating Coolers (Chillers)• Low Temp. Recirculating Coolers (Chillers)• General Purpose Laboratory Refrigerators• Pharmacy Refrigerator • General Purpose Laboratory Freezer• Open-Air Shakers• Rocking & Waving Shakers• Separatory Funnel Shakers • Magnetic Stirrers – Scale, Digital & Multi Position • Overhead Stirrers – Economic, Anlogy & Digital• Vortex Mixer – Economic & Basic • Flask Support• Ultrasonic Cleaners• Magnetic Drives

Environmental Testing Equipment• Plant Growth Chambers• Temperature & Humidity Chambers• Clean Temperature & Humidity Chambers• Low Temperature Chambers• Incubators• Low Temperature Incubators• Incubated Shakers• Shaking & Heating Baths • Fingerprint Development Temp. & Humid. Chambers

Industrial Reliability Testing Equipment• Temperature & Humidity Chambers• General Recirculating coolers (Chillers)• Low Temp. Recirculating Coolers• Vacuum Ovens• Temperature Chambers

* Custom-Designed Equipment

Baths & Circulators

Desiccators

Fume Hoods

Incubators

Ovens

Pumps

Recirculating Coolers (Chillers)

Laboratory Refrigerators & Freezers

Shakers

Stirrers & Vortex Mixer

Environmental Chambers

Other

2011~2012

Lab Companion• Lab Companion Korea - International head office #1005, Byucksan Digital valley 6-cha, 481-4 Gasan-Dong, Geumcheon-Gu, Seoul 153-803, Korea Tel +82 2 2627 3816 Fax +82 2 3143 1824 e-mail [email protected]

• Lab Companion U.S.A. 1-A Gill st. Woburn, MA 01801, U.S.A. Tel +1 781 376 0700 Fax +1 781 376 0704 e-mail [email protected]

• Lab Companion Europe Unit 3, Tower Industrial Park, Chalgrove, Oxfordshire, OX44 7XZ, United Kingdom Tel +44 1865 400321 Fax +44 1865 400736 e-mail [email protected]

• Lab Companion China RM107, No.68 Line, 569 Xin Hua Road, Shanghai, 200052 China Tel +86 21 6294 0608 Fax +86 21 6294 0602 e-mail [email protected]

• Lab Companion SEA (South East Asia) No.7A, Jalan Kemboja 1 B/2, 48300 Bandar Bukit Beruntung, Selangor Darul Ehsan, Malaysia Tel +60 603 6028 5833 Fax +60 603 6028 5822 e-mail [email protected]

Dr. Kim, Jin-Eog

is proud to introduce to you in this catalogue, our new line of Y2011 Laboratory and Environmental Testing Equipments. We are taking the next step forward and eager to take on new challenges in creating a product right for you! In the world inside physics and chemistry our reliable instruments will help aid you in the growth and evolution in any field of research. We are driven by innovation and our extensive arrays of products are cutting-edge in the scientific and industrial research industries and specialized markets.

Through continuous focus on human resources, acquisition of technology, and overcoming new challenges, we have set forth on preserving and strengthening our Jeio Tech cornerstone in maintaining to be one of the Global Leading Companies in the manufacturing and distributing of Laboratory and Environmental Testing Equipments.

JEIO TECH's number one priority is to provide the world's best products and services through outstanding quality and customer satisfaction.

Founder & President

JEIO TECH

Jeio tech Co,. Ltd Established

CE/UL - Accredited international certificates (Y2010 acquired "CE marks" - 38 models 158 products)

Participated in international exhibition; ACHEMA, Pittcon, Arab lab, Analytica and etc.

Strong Worldwide network· Lab Companion overseas branch in China, U.K, Malaysia, & U.S.A.

· Jeio Tech works with more than 300 distributors and dealers worldwide.

Annual technical seminar and service training

Leading company of scientific and industrial instrument manufacturer ·Leader of Korean markets share.

·Average 20% of growth rate annually. ·Wide field of laboratory and industrial products.

(Thermal, refrigerating, pressure, humidity,and cleaning conditions)·Set up the one-step solution for all your laboratory needs.

From scientific research and development to industrial reliable test for perfect simulation of enviromental conditions.·Developed newly build mass production of 2nd high-tech manufacturing facility (Y2011) in Dae Jeon techno valley.

(Show room, warehouse, R & D center and etc)

History of JEIOTECH

ISO 9001 certification received

Over 18 Own technology patents certificated in Korea and U.S.A

Organized the Institute of Technology

Launched of Lab Companion brand

1991 ~ 1999Growth and Consolidation in

Company founded in

1988 ~ 1990

Becoming a Global Player in

2000 ~ Now

Lab Companion is seeking for the global standard.

Lab Companion which is JEIO TECH's laboratory instrument brand is well known for its guaranteed quality since 1989.

We have being organized high quality one-stop manufacture system on sheet metal work, metallic moldings, coating, assembling.

We keep trying to give our clients maintenance-free, user-friendly and safe operation. � e 'Lab Companion' is continuously growing and developing into an international brand value, and best products for reliable results.

We are striving exceptional service to become the � rst choice of our customers, to improve customer value enhancement with high- quality engineering and advanced organization.

Ergonomic design system helps to maintain the units easily and to be free from frequent mechanical trouble.

Qualified worldwide service team - Engineering and sales managing specialists always provide tailored service.

Based on over 20 years of temperature control technical experience, our highly integrated engineering team focuses on always striving to provide di� erentiated values from competition. Jeio tech have manufactured the basic metal processing to � nal inspection processes are strictly under controlled to try to deliver the best products for valued clients.

Our professorial engineer know-how will never cease to build up its reputation as the � rst partner for customer's needs.

Valuable & Reliable production system

Enable to do anything!

Valuable and Progressive Service Know-How

JEIO TECH - Lab Companion obtained ISO 9001: 2008 / CE / UL certi� cation in order to raise the customer satisfaction of its superior technology and quality. Certi� cates

Product Catalog &Technical Highlight Worldwide Relationship

We are representing as a high level of technical instrument manufacturer throughout Korea and worldwide. Over 60 countries -Intimate relationship with our partners and logistics providers Worldwide.

Periodically communicate and instruct with the latest technology and service principles.

All our partnership groups are very quali� ed and enthusiastic to keep providing the best solution for your laboratory needs.

CLS-Safety Control SystemCLS (Custom Logical Safe) Control System

Our years of technical know-how develops a maximized safety control system-CLS Control System with adjustable warning and safety functions for user safety and convenience.

All the instruments of JEIO TECH show much safer operation with independent safety device and circuit when electric and electronic system trouble occurred even during the operation. (Patented)

CFC-Free(Green Mark)

Protect the Global Environment

All JEIO TECH products use HFC refrigerant which causes NO damage to ozone layer. Complies with the measures for ozone layer protection speci� ed by the Montreal Protocol

BDBC2-Fuzzy Control SystemBDBC2-Fuzzy Control System

Temp. & Humid. Fuzzy Control System design allows our Temp. & Humid. chambers provide extended very low-temp. with stable humidity control range.

Also, the system optimize and increase energy e� ciency by cascading refrigeration and heating controls adjusting for humidi� cation, and dehumidi� cation. (Patented)

Balan

ced D

ehumidifying & Bath Cooling

Fuzzy Control System

Balan

ced D

ehumidifying & Bath Cooling

Fuzzy Control System

GD mark Award of good designed products

A Design Award only awarded for well-designed Korean manufactured products that have passed the criteria in product aesthetics, relationship with the user, environmental awareness, economic considerations, and consumer satisfaction.

Jeio Tech’s expertise lies in not only in our well-executed designs but we are thoroughly alive with ideas and cu� ing-edge designs.

1) Products without refrigerators · Specifications are under room temperature 25℃, no load. ·Applicable operation temperature range is 15 to 40℃.

2) Products with refrigerators · Specifications are under room temperature 20℃, no load. ·Applicable operation temperature range is 18 to 35℃. * Except for Temperature (& Humidity) Chambers. (P. 114-146)

3) All product spec can be changed without prior notice subject to our performance improvement and quality control of products

4) Communication to PC (Software + Cable) PC Control Software ·Display of temp. values and effective heating / cooling capacity on PC. ·Programming and recording of time parameter and individual temp. profile.

5) Our Web-site includes detailed information of all JEIO TECH products with recent technical data

Please visit www.jeiotech.com

� e contents of this catalogue are based on the below unless otherwise speci� ed.

Table of Contents

10 Heating Baths13 Shaking Heating Baths14 Viscometer Heating Baths15 Heating Bath Circulators16 Refrigerated & Heating Bath Circulators18 Cold Trap Baths

Baths & Circulators8

22 Cubic Vacuum Desiccators22 Round Vacuum Desiccators

Desiccators22

26 Clean Benches30 Ductless Hume Hoods34 PCR Workstations34 UV Sterilization cabinet

Fume Hoods24

40 Incubators42 Low Temperature Incubators45 Low Temperature Personal Incubators46 Incubated & Refrigerated & Illuminated Shakers

Incubators38

68 Electrical Aspirator Pumps69 Rotary Vacuum Pumps

Pumps68

58 Forced Convection Ovens63 Natural Convection Ovens66 Vacuum Ovens

Ovens56

82 General Purpose Laboratory Refrigerators82 Pharmacy Refrigerators82 General Purpose Laboratory Freezers

Laboratory Refrigerators & Freezers80

90 Advanced Orbital Shakers92 Dual-Action Shakers93 Economic Shakers94 Mini Shakers95 Rocking & Waving Shakers96 Separatory Funnel Shakers

Shakers86

114 Temperature [& Humidity] Chambers128 Temperature [& Humidity] Chambers-Tabletop Type137 Finger Print Temperature & Humidity Chambers140 Clean Temperature & Humidity Chambers146 Plant Growth Chambers

Environmental Chambers112

151 Flask Supports152 Ultrasonic Cleaners154 Magnetic Drives

Other150

156 Technical Data160 INDEX

Appendixes155

104 Magnetic Stirrers 106 Overhead Stirrers 108 Vortex Mixers

Stirrers & Vortex Mixer102

72 Recirculating Coolers - Basic type74 Low Temp. Recirculating Coolers - General Type76 Low Temp. Recirculating Coolers - Intelligent Type

70 Recirculating Coolers (Chillers)

Economy Heating Baths.Heating Baths.Viscometer Heating Baths.

Shaking Heating Baths.Heating Baths Circulators.Refrigerated & Heating Bath Circulators.

Baths & Circulators

Heating Baths

Description Working Temp. Range [℃/℉]

Bath Volume[L/cu ft]

TemperatureStability [±℃/℉] Page

Analog type (Economic)

BW-05BAmb. +7 to 100/ Amb. +12 .6 to 212

3.5 / 0.10.5 / 0.9 10BW-10B 11.5 / 0.4

BW-20B 20.0 / 0.7

Digital type (Economic)

BW-05HAmb. +5 to 100/ Amb. +9 to 212

3.5 / 0.10.1 / 0.18 10BW-10H 11.5 / 0.4

BW-20H 20.0 / 0.7

Dual type (Economic)

BW-0505HAmb. +5 to 100/ Amb. +9 to 212

3.5 & 3.5 / 0.1 & 0.1

0.1 / 0.18 10BW-0510H 3.5 & 11.5 / 0.1 & 0.4BW-1010H 11.5 & 11.5 / 0.4 & 0.4BW-1020H 11.5 & 20.0 / 0.4 & 0.7

General PurposeBW-05G

Amb. +5 to 100/ Amb. +9 to 212

5.0 / 0.20.2 / 0.36 12BW-10G 10.0 / 0.4

BW-20G 20.0 / 0.7

Shaking & Heating

BS-06Amb. +5 to 100/ Amb. +9 to 212

17.0 / 0.6

0.2 / 0.36 13BS-11 25.0 / 0.9BS-21 37.0 / 1.3BS-31 55.0 / 1.9

Viscometer VB-25G Amb. +5 to 150/ Amb. +9 to 302

25.0 / 0.9 0.05 / 0.09 14VB-40G 40.0 / 1.4 0.1 / 0.18

Bath Circulators

Description Working Temp. Range [℃/℉]

Bath Volume[L/cu ft]

TemperatureStability [±℃/℉] Page

Heating

CW-05GAmb. +5 to 150/ Amb. +9 to 302

5.0 / 0.2 0.05 / 0.09

15CW-10G 10.0 / 0.4 0.05 / 0.09 CW-20G 20.0 / 0.7 0.1 / 0.18 CW-30G 30.0 / 1.1 0.1 / 0.18

Refrigerated & Heating(to -25℃)

RW-0525G -25 to 150/ -13 to 302

5.0 / 0.2 0.05 / 0.09

16RW-1025G 10.0 / 0.4 0.05 / 0.09 RW-2025G 20.0 / 0.7 0.05 / 0.09RW-3025G 30.0 / 1.1 0.08 / 0.14

Refrigerated & Heating(to -35℃)

RW-0540G -35 to 150/ -31 to 302

5.0 / 0.2 0.05 / 0.09

16RW-1040G 10.0 / 0.4 0.05 / 0.09 RW-2040G 20.0 / 0.7 0.05 / 0.09 RW-0540G 30.0 / 1.1 0.08 / 0.14

Cold Trap BathDescription Working Temp. Range [℃/℉] Bath Volume [L/cu ft] Page

Cold Trap CTB-10 Down to -40 / -40 4.8 / 0.17 18

Accessories & OptionsDescription Page

for Baths & Circulators 20-21for Viscometer Heating Baths 21for Shaking Heating Baths 19

Selection Guide

Safety functions1) Self-protecting cut-off function and signal: - For over temperature, the power supply is

automatically cut from the heater and controller systematically before the unit shuts down.

- 2 separated over-current fuses for user safety.

2) Time setting function for automated run / off: - Integrated time setting: Delayed ON / OFF.

(from 1 min to 99 hr 59 min) - Operating settable function: After a power

interruption, select automated run or manual run.

3) Low fluid level and dry-running protection: - Intermittent tone alert sounds and optical

signals alarms display on the control panel. - Heating element automatically stop soon after

the alarm has been triggered to protect the user and samples.

* Except for BW-B/H series.

Optimum control performance1) Professional electronic controls and program

control : (Except for BW-B series) - Microprocessor PID temperature control with

very simple calibration and auto-tuning features. - Conveniently preset 3 most commonly used

temperature settings. - Select between Celsius and Fahrenheit.

2) Applicable control display considering HMI (Human Machine Interface) network system:

- Similar key arrangements throughout all our products.

- Splash-proof / easy-to-clean keypads and clear LED displays.

- A quick lock button prevents accidental resetting of parameters.

* Except for BW-B/H series.

Ideal construction1) High quality 304 grade stainless steel interior

bath and dirt-repellent powder coating external surface.

2) All wetted parts are made of stainless steel, making it corrosion-resistant allowing users to use bath fluids other than water.

3) Leak-proof, corrosion-resistant, seamless, deep-drawn and rounded corner baths for easy cleaning.

Technical Benefits

General ApplicationsGeneral Applications

Baths & CirculatorsBW-Series BS-Series CW, RW-Series

Bacteriological Examinations • •Coagulation Tests • • •Coliform Determinations • •Crude Oil Research • •Cytochemistry Examinations •Demulsibility Research • •Enzyme Studies •Food Processing QC • •Genetic Studies • • •Hormone Studies • •Immunological Research • • •Incubation for Microbiological Assays • • •Molecular Biology • • •Protein Studies • •Serological tests • • •Thawing Cryopreservation Vials •Tissue Culture Studies • • •Virology Research • • •Warming Reagents • •Water Quality Research • • •

Heating Bath Circulators (Combined)

- Clinical chemistry and analytics / external temperature control application for measuring cells, photometers, refractometers, polarimete rs, rotary viscometers.

Refrigerated & Heating Bath Circulators (Combined)

- Routine laboratory temperature applications / external temperature control application for measuring cells, photometers, refractometers, polarimeters, viscometers, fermenters, electrophoresis chambers, chromatography columns, rotary evaporators, rheometers.

* For general purpose use and storage.

10 Operating features for BW-B (Analog types)

• +7℃ above room temperature to 100℃. • On / Off temperature control. • Over -temperature limit, alarm indicator. • Analog dialed indication with fine adjustment.

Operating features for BW-H (Digital & Dual types)

• +5℃ above room temperature to 100℃. • PID temperature control. • Over-temperature limit, alarm indicator. • Digital LED displays temperature readouts and setpoint to

0.1℃ or 1℃.

Constructional features • Low-profile baths with front slope-panel controls provide an

easier access and makes it safer.

• Additional inner circulating system by equipped agitator. (BW-H series)

• Dual bath models feature individually programmable temperature controlled chambers. (BW-H series)

• Various accessories - gable and flat covers, test tube and spring wire racks, half-shelf adjusters etc. (optional)

* All accessories for dual baths (BW-H series) refer to BW-H / B series acces-sories options per each bath size.

(Ex. Each gable cover for BW-0510H may be used to cover BW-05H / B and the other cover for BW-10H / B)

BW-10B with test tube rack

BW-10H with gable cover

BW-0510H with open-rings cover

Optional Accessories • Transparent polypropylene gable / Stainless steel flat /

Open-rings covers.• Test tube racks, Spring wire racks, Half-shelf adjusters.

see page 20-21

Economical water bath series with complete temperature maintenance!

Especially BW-B/ H series has a patented agitating system that makes bettertemperature stability. A wide range of choice from analog or digital control, even mix & match sizes of dual bath models.

Baths & CirculatorsHeating Baths (Economic)

11

Baths & CirculatorsHeating Baths (Economic)

Specifications & Ordering Informations Analog types

Model BW-05B BW-10B BW-20BBath volume (L / cu ft) 3.5 / 0.1 11.5 / 0.4 20 / 0.7Working Temperature Range (℃ / ℉) Amb. +7 to 100 / Amb. +12.6 to 212Temperature Stability 1) (±℃ / ℉) 0.5 / 0.9

Dimensions

Bath opening / depth(W×L, D) (mm / inch)

240×136, 115 /9.4×5.4, 4.5

300×240, 165 /11.8×9.5, 6.5

498×300, 165 /19.6×11.8, 6.5

Overall(W×L×H, H) (mm / inch)

303×242×245 /11.9×9.5×9.6

357×330×290 /14.1×13.0×11.4

564×392×290 /22.2×15.4×11.6

Net weight (kg / lbs) 6.5 / 14.3 10.0 / 22.0 18.5 / 40.8Electrical Requirements (230V) 60Hz, 3.0A 50Hz, 3.0A 60Hz, 4.3A 50Hz, 4.3A 60Hz, 8.7A 560Hz, 8.7ACat. No. AAH46011K AAH46012K AAH46021K AAH46022K AAH46031K AAH46032KElectrical Requirements (120V) 60Hz, 5.8A 60Hz, 8.3A 60Hz, 8.3ACat. No. AAH46013U AAH46023U AAH46033U

1) Technical data. (according to DIN 12876)

Specifications & Ordering Informations Digital types

Model BW-05H BW-10H BW-20HBath volume (L / cu ft) 3.5 / 0.1 11.5 / 0.4 20 / 0.7Working Temperature Range (℃ / ℉) Amb. +5 to 100 / Amb. +9 to 212Temperature Stability 1) (±℃ / ℉) ±0.1 / 0.18

Dimensions


240×136, 150/ 9.4×5.4, 5.9

300×240, 200/ 11.8×9.5, 7.9

498×300, 200/ 19.6×11.8, 7.9

Overall(W×L×H) (mm / inch)

307×216×266/ 12.08×8.5×10.47

364×316×318/ 14.33×14.44×12.5

564×372×318/ 22.2×14.64×12.51

Net weight (kg / lbs) 6.5 / 14.3 9.5 / 21.0 15.5 / 34.2Electrical Requirements (230V, 50 / 60Hz) 3.0A 4.3A 8.7ACat. No. AAH45115K AAH45125K AAH45135KElectrical Requirements (120V, 60Hz) 5.8A 8.3A 8.3ACat. No. AAH45113U AAH45123U AAH45133U

1) Technical dad (according to DIN 12876)

Specifications & Ordering Informations Dual types

Model BW-0505H BW-0510H BW-1010H BW-1020HBath volume (L / cu ft) 3.5 & 3.5 / 0.1 & 0.1 3.5 & 11.5 / 0.1 &0.4 11.5 & 11.5 / 0.4 & 0.4 11.5 & 20.0 / 0.4 & 0.7Working Temperature Range (℃ / ℉) Amb. +5 to 100 / Amb. +9 to 212Temperature Stability 1) (±℃ / ℉) ±0.1 / 0.18

Dimensions

Bath opening / depth(W×L, D & W×L, D) (mm / inch)

240×136, 150Per chamber

240×136, 150 & 300×240, 200

300×240, 200Per chamber

300×240, 200 & 498×300, 200

9.4×5.4, 5.9Per chamber

9.4×5.4, 5.9 & 11.8×9.5, 7.9

11.8×9.5, 7.9Per chamber

11.8×9.5, 7.9 & 19.6×11.8, 7.9

Overall(W×L, D & W×L, D) (mm / inch)

590×200×265.4 /23.22×7.8×10.45

544×300×317.6 /21.41×11.8×12.5

706×300×317.6 /27.79×11.8×12.5

844×356×317.6 /33.22×14.64×12.5

Net weight (kg / lbs) 9.7 / 21.3 12.4 / 27.3 14 .0 / 30.8 17.6 / 38.7Electrical Requirements (230V, 50 / 60Hz) 3.0 & 3.0A 3.0 & 4.3A 4.3A & 4.3A 4.3A & 8.7ACat. No. AAH47115K AAH47125K AAH47135K AAH47145KElectrical Requirements (120V, 60Hz) 5.8A & 5.8A 5.8A & 8.3A 8.3A & 8.3A 8.3A & 8.3ACat. No. AAH47113U AAH47123U AAH47133U AAH47143U

1) Technical dad [according to Din 12876]

12

Specifications & Ordering Informations

Model BW-05G BW-10G BW-20GBath volume (L / cu ft) 5 / 0.2 10 / 0.4 20 / 0.7Working Temperature Range (℃ / ℉) Amb. +5 to 100 / Amb. +9 to 212Temperature Stability 1) (±℃ / ℉) 0.2 / 0.36

Dimensions


231×150, 160/ 9.1×5.9, 6.3

285×211, 180/ 11.2×8.3, 7.1

345×290, 200/ 13.6×11.4, 7.9

Overall / with gable cover(W×L×H) (mm / inch)

355×260×334/ 14.0×10.2×13.1

410×311×354/ 16.1×12.2×14.0

471×390×374/ 18.5×15.4×14.7

Net weight (kg / lbs) 10.0 / 22.0 14.0 / 31.0 18.0 / 40.0Electrical Requirements (230V, 50 / 60Hz) 3.0A 4.4A 8.7ACat. No. AAH41405K AAH41415K AAH41425KElectrical Requirements (120V, 50 / 60Hz) 5.8A 8.3A 8.3ACat. No. AAH41406U AAH41416U AAH41426U

1) Technical data (according to DIN 12880)

Baths & CirculatorsHeating Baths

Excellent temperature performance heating water baths for general-purpose use. BW-G series features Microprocessor PID controls to guarantee exceptional temperature Variation and exclusive timer, programming function for critical research, quality control and regulatory testing!

Operating features • +5℃ above room temperature to 100℃. • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over-temperature limiter and low fluid level protection. • 3 different temperature values memorable without auto-tuning. • Digital LED display (0.1℃ resolution) with splash-proof keypads.

Constructional features • Stainless steel bath allows to use with water or other bath fluids,

such as silicone fluids.

• User-friendly low-profile baths design with easy-to-use digital controller with 2 display.

• Dry-running protection; automated heating element cut-off and audible and visual warning.

• Bottom baffle plate screens heater and sensor to protect sample and operators from direct contact.

BW-05G included SUS cover Included Accessories • Stainless steel flat type cover. Optional Accessories • Open-rings covers. see page 20-21 • Test tube racks, Spring wire racks,

Half-shelf adjusters.

13

Reciprocal shaking heating baths.

BS series features a more accurate rapid shaking thanks to the noiseless and anti-vibration Brushless DC motor. The constant temperature performance keeps samples incubated, ideal for DNA, tissue, or cell culture applications.

Shaking & Heating Baths


Model BS-06 BS-11 BS-21 BS-31Bath volume (L / cu ft) 17.0 / 0.6 25.0 / 0.9 37.0 / 1.3 55.0 / 1.9Working Temperature Range (℃ / ℉) Amb. +5 to 100 / Amb. +9 to 212Temperature Stability 1) (±℃ / ℉) 0.2 / 0.36Shaking system

Motion / Speed range (RPM) Reciprocating / 20 to 180Recip stroke length (mm / inch) 25, 30, 35 / 1.0, 1.2, 1.4 Available - Standard 30 / 1.2

Dimensions

Bath opening /depth (W×L, D) (mm / inch)

109×243, 235/ 4.3×9.6, 9.3

229×243, 235/ 9.0×9.6, 9.3

389×243, 235/ 15.3×9.6, 9.3

670×350, 235/ 26.4×13.8, 9.3

Overall (W×L×H) (mm / inch)

430×440×355/ 16.9×17.3×14.0

550×440×355/ 21.7×17.3×14.0

710×440×355/ 28.0×17.3×14.3

860×490×355/ 33.9×19.3×14.0

Net weight (kg / lbs) 3.7A 4.6A 8.9A 8.9AElectrical Requirements (230V, 60Hz) 3.0 & 3.0A 3.0 & 4.3A 4.3A & 4.3A 4.3A & 8.7ACat. No. AAH44061K AAH44111K AAH44211K AAH44311KElectrical Requirements (230V, 50Hz) 3.7A 4.6A 8.9A 8.9ACat. No. AAH44062K AAH44112K AAH44212K AAH44312KElectrical Requirements (120V, 60Hz) 7.1A 8.8A

- -Cat. No. AAH44063U AAH44133U

※ BS-21,31 are provided ONLY for 230 voltage.1) Technical data. (according to DIN 12876)

Operating features • +5℃ above room temperature to 100℃. • Microprocess PID control / built-in Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Independent over-temperature limiter. • Digital LED display (0.1℃ / 1 rpm resolution) with splash-proof keypads.

Constructional features • Shaker mechanism has its own control key, so the unit can be used

as constant temperature baths.

• Gently start shaking to minimize shock to the test samples.

• Multi-LED display for adjusting actual value, setpoint temperatures and shaking frequency.

• Baffle plate screens circulator, heater, and sensor to minimize turbulence in the bath fluid and to protect the sample and user from direct contact with the heating element.

• Shaking carriage is removable and can be assembled outside of the bath; no direct contact with the bath fluid.

• Included bath cover prevents liquid losses, the gable type roof ensures no-dripping into the test samples directly.

• Included SUS 304 spring wire rack consists double column for various setting of glassware.

BS-31 included gable cover and spring wire rack Included Accessories • Stainless steel gable type cover. • Spring wire racks. Optional Accessories • Universal platform, Dedicated platform,

Flask clamps. see page 19 • Test tube racks.

Baths & Circulators

14

Viscometer Heating Baths

Specifications & Ordering Informations Model VB-25G VB-40G

Bath volume (L / cu ft) 25.0 / 0.9 40.0 / 1.4Working Temperature Range 2) (℃ / ℉) Amb. +5 to 150 / Amb. +9 to 302Temperature Stability 1) (±℃ / ℉) 0.05 / 0.09 0.1 / 0.18

Dimensions

Bath opening / depth (W×L, D) (mm / inch) 145×265, 368 / 5.7×10.4, 14.5 295×265, 368 / 11.6×10.4, 14.5Cover lids / Hole for thermometer (mm) 5ea / Ø51.0, 1ea / Ø12.6 8ea / Ø51.0, 1ea / Ø12.6Overall (W×L×H) (mm / inch) 492×374×547 / 19.4×14.7×21.5 642×374×547 / 25.3×14.7×21.5Net weight (kg / lbs) 28.0 / 61.7 37.0 / 81.6

Electrical Requirements (230V) 60Hz, 13.0A 50Hz, 13.0A 60Hz, 13.0A 50Hz, 13.0ACat. No. AAH43301K AAH43302K AAH43401K AAH43402K

* VB-25G, 40G series are provided ONLY for 230 voltage.1) Technical data. (according to DIN 12876)2) If you want to operate the unit below Amb. +5℃ (Amb. +9℉), the optional cooling circulator must be used with.

In that case, the temperature range can be from +10℃ (+50℉). Ordering information - refer to P.17

VB-G series maintains higher temperature stability and excellent visibility for kinematic viscosity measurement using glass capillary viscometers.

Ultra precise temperature control with excellent visibility!

Operating features • +5℃ Above room temperature to 150℃. • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over-temperature limiter and low fluid level protection. • Conveniently preset 3 most commonly used temperature settings • Select between Celsius and Fahrenheit. • Digital LED display with splash-proof keypads.

(0.01℃ resolution at 0~99.9℃ / 0.1℃ resolution at 100~150℃)

• RS-232 interface available.

Constructional features • Double tempered safety glass windows in front and rear well

ensures excellent visibility.

• Baffle plate screens circulator, heater, and sensor to minimize turbulence in the bath fluid and to protect samples and users from direct contact with the heating element.

• A vane type stirrer makes powerful circulation for creating an optimal temperature variation.

• Included stainless steel cooling coil allows to work at temperatures below or slightly above ambient.

(Use of optional cooling circulator allows to work at temperatures from 10℃ / 50℉)

• Ø51.0mm holes for suspending glass capillary viscometers tubes and a Ø12.6mm hole for thermometer.

VB-40G included SUS coversIncluded Accessories • Stainless steel covers for holes in the top. • Cooling coil.Optional Accessories • Tube holders for 2 openings viscometer

glass tube. (Max. 5 holders for VB-25G / Max. 8 holders for VB-40G)

see page 21 • Cooling circulators.

Baths & Circulators

15

Heating Bath Circulators

External and internal circulating with powerful pumping capacity.

CW-G series is designed for controlling temperature in external instruments, or for immersion purposes. Pump has five adjustable pressure stages.

Operating features • +5℃ above room temperature to 150℃. • Microprocessor PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over-temperature limit and low fluid level protection. • Conveniently preset 3 most commonly used temperature settings,

without auto-tuning. • Digital LED display (0.1℃ resolution) with splash-proof keypads. • RS-232 interface available.

Constructional features • Variable-speed pump for liquid viscosity for accurate, stable, and

efficient temperature management. (1 to 3 steps of pump for internal circulation / 4 and 5 steps for external circulation)

• Powerful pressure and suction pumps provide contrast pressure and flow rate throughout the whole temperature range.

• Baffle plate screens circulator, heater, and sensor to minimize shaking bath fluids and protect sample and operators from direct contact.


• Seamless stainless steel tank with a reservoir drain that resists corrosion and make cleaning easy.

• Space saving design uses minimal bench space.

CW-05G included SUS coversIncluded Accessories • Stainless steel flat type cover. • One 30cm (1 ft) length and Ø12mm of

silicone rubber tubing.Optional Accessories • Suction function for pump.

see page 20-21 • Test tube racks, Spring wire racks.

Specifications & Ordering Informations Model CW-05G CW-10G CW-20G CW-30G

Bath volume (L / cu ft) 5.0 / 0.2 10.0 / 0.4 20.0 / 0.7 30.0 / 1.1Working Temperature Range 2) (℃ / ℉) Amb. +5 to 150 / Amb. +9 to 302Temperature Stability 1) (±℃ / ℉) 0.05 / 0.09 0.05 / 0.09 0.1 / 0.18 0.1 / 0.18

PumpMax. pressure, max. flow rate 5.9 PSI (406.8 millibar), 7.4 gallons / minute (28.0 liters / minute)

Max. suction flow rate 2.6 gallons / minute (10.0 liters / minute)

Dimensions


150×99, 160/ 5.9×3.9, 6.3

211×154, 180/ 8.3×6.1, 7.1

290×214, 200/ 11.4×8.4, 7.9

300×264, 230/ 11.8×10.4, 9.0


220×395×424/ 8.7×15.6×16.7

281×450×444/ 11.1×17.7×17.5

360×510×464/ 14.2×20.1×18.3

370×560×494/ 14.6×22.0×19.4

Net weight (kg / lbs) 12.5 / 27.6 15.0 / 33.0 17.5 / 38.6 19.5 / 43.0Electrical Requirements (230V, 50 / 60 Hz) 4.5A 6.7A 8.8A 8.8ACat. No. AAH52305K AAH52315K AAH52325K AAH52335KElectrical Requirements (120V, 50 / 60 Hz) 8.6A 8.6A 8.6A 8.6ACat. No. AAH52306U AAH52316U AAH52326U AAH52336U

1) Technical data. (according to DIN 12876)2) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from Amb. +5℃ but in 4 and 5 steps, the range will be from Amb. +15℃.

Baths & Circulators

16

Refrigerated & Heating Bath Circulators

Rapid heating and cooling throughout the entire temperature range!RW-G series has powerful circulation pump for external and internal circulating. The temperatures can be down to maximum -35℃ that maintain and control accurate low temperatures for use with Refractometers and Viscometers.

Operating features • -25 to 150 for RW-25G / -35 to 150 for RW-40G. • Microprocessor PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over-temperature limit and low fluid level protection. • Conveniently preset 3most commonly used temperature settings. • Digital LED display (0.1 resolution) with splash-proof keypads. • RS-232 interface available.

Constructional features • Turbulence reduced do to five-speed duplex pump and built-in

cooling coil let you use in an open or closed bath environment. (1 to 3 steps of pump for internal circulation / 4 and 5 steps for external circulation)

• Baffle plate screens circulator, heater, and sensor to minimize turbulence in the bath fluids and to protect the samples and user from direct contact with the heating or cooling element.


• Seamless stainless steel tank with a reservoir drain that resists corrosion and make cleaning easy.

• Use CFC-free refrigerant R-134A, R-404A and double service valve to prevent the leakage of refrigerant.

• Quick-release front grille for easy condenser cleaning and space saving design uses minimal bench space.

RW-0525G included SUS coversIncluded Accessories • Stainless steel flat type cover. • One 30 cm (1 ft) length and Ø12 mm of

silicone rubber tubing.Optional Accessories • Additional suction function.

see page 20-21 • Test tube racks, Spring wire racks. * Applicable for CW-G, RW-25G, RW-40G series.* Bath fluid : Water (on the normal temperature)

Baths & Circulators

17

Refrigerated & Heating Bath CirculatorsBaths & Circulators

Specifications & Ordering Informations RW-25G models for temperature range of -25℃ to 150℃

Model RW-0525G RW-1025G RW-2025G RW-3025GBath volume (L / cu ft) 5.0 / 0.2 10.0 / 0.4 20.0 / 0.7 30.0 / 1.1Working Temperature Range 2) (℃ / ℉) -25 to 150 / -13 to 302Temperature Stability 1) (±℃ / ℉) 0.05 / 0.09 0.05 / 0.09 0.05 / 0.09 0.08 / 0.14

Coolingcapacity

at -20℃ (-4℉), W 30 50 260 390at 0℃ (+32℉), W 230 250 410 570at +20℃ (68℉), W 320 380 560 680Refrigerator 1 / 3 LBP, R-134A 1 / 3 LBP, R-134A 1 / 2 LBP, R-404A 3 / 4 LBP, R-404A


Max. suction flow rate 3) 2.6 gallons / minute (10.0 liters / minute)

Dimensions

Bath opening /depth(W×L, D) (mm / inch)

150×99, 160/ 5.9×3.9, 6.3

211×154, 180/ 8.3×6.1, 7.1

290×214, 200/ 11.4×8.4, 7.9

300×264, 230/ 11.8×10.4, 9.0


302×438×690/ 11.9×17.2×27.2

360×490×780/ 14.2×19.3×30.7

380×560×825/ 15.0×22.0×32.5

440×620×895/ 17.3×24.4×35.2

Net weight (kg / lbs) 37.0 / 81.6 44.0 / 97.0 60.0 / 132.2 7.0 / 147.7Electrical Requirements (230V, 60Hz) 7.0A 9.2A 12.8A 13.8ACat. No. AAH57001K AAH57011K AAH57021K AAH57031KElectrical Requirements (230V, 50Hz) 7.0A 9.2A 12.8A 13.8ACat. No. AAH57002K AAH57012K AAH57022K AAH57032KElectrical Requirements (120V, 60Hz) 12.6A 12.6A

- -Cat. No. AAH57003U AAH57013U

* RW-2025G, 3025G are provided ONLY for 230 voltage. 1) Technical data. (according to DIN 12876)2) The cooling capacity is measured on a 230V / 50Hz electrical condition.3) The additional suction function is optional.

Specifications & Ordering Informations RW-40G models for temperature range of -35℃ to 150℃

Model RW-0540G RW-1040G RW-2040G RW-3040GBath volume (L / cu ft) 5.0 / 0.2 10.0 / 0.4 20.0 / 0.7 30.0 / 1.1Working Temperature Range 2) (℃ / ℉) -35 to 150 / -31 to 302Temperature Stability 1) (±℃ / ℉) 0.05 / 0.09 0.05 / 0.09 0.05 / 0.09 0.08 / 0.14

Coolingcapacity

at -20℃ (-4℉), W 80 150 400 440 at 0℃ (+32℉), W 150 330 660 700 at +20℃ (68℉), W 280 450 800 880Refrigerator 1 / 2 LBP, R-404A 1 / 2 LBP, R-404A 3 / 4 LBP, R-404A 1 LBP, R-404A


Max. suction flow rate 3) 2.6 gallons / minute (10.0 liters / minute)

Dimensions

Bath opening /depth(W×L, D) (mm / inch)

150×99, 160/ 5.9×3.9, 6.3

211×154, 180/ 8.3×6.1, 7.1

290×214, 200/ 11.4×8.4, 7.9

300×264, 230/ 11.8×10.4, 9.0


302×438×690/ 11.9×17.2×27.2

360×490×780/ 14.2×19.3×30.7

380×560×825/ 15.0×22.0×32.5

440×620×895/ 17.3×24.4×35.2

Net weight (kg / lbs) 38.0 / 83.8 44.0 / 97.0 60.0 / 132.2 67.0 / 147.7Electrical Requirements (230V, 60Hz) 8.5A 10.7A 13.8A 14.8ACat. No. AAH57101K AAH57111K AAH57121K AAH57131KElectrical Requirements (230V, 50Hz) 8.5A 10.7A 13.8A 14.8ACat. No. AAH57102K AAH57112K AAH57122K AAH57132K

* RW-0540G, 1040G, 2040G, 3040G series are provided ONLY for 230 voltage.1) Technical data. (according to DIN 12876)2) The cooling capacity is measured on a 230V / 50Hz electrical condition. 3) The additional suction function is optional.

18 Features

• The temperature is indicated by LED digits. • Glass traps can be connected. • Over Current Breaker. • 2 glass traps comes standard with the equipment. • Condenser can be cleaned easily by opening front cover. • Realized constructive precision, little noise, small size of the body. • Dissolving system for ice or solid matter stuck on the bath. • Durable Stainless Steel Bath. • Transparent acrylic lid with glass trap to check condensate level in

the trap.

Digital temperature display.Effective moisture capture.Useful for exceptional cooling system.

Specifications

Specifications CTB - 10Temperature Range (℃ / ℉) Down to -40 / -40

Material

Bath external Stainless steel, 1.2t, double painted & bakedBath up desk Stainless steel, 1.5tInsulation Polyurethane foam (30mm)

Refrigerator 1 / 2 HP, R-404A (LBP)

Dimensions

Volume (L / cu ft) 4.8 / 0.17Bath (Ø×H, mm) Dia, 210×204 / 8.3×8Overall (W×D×H) (mm / inch) 360×465×555 / 14.1×18.3×21.9Net weight (kg / lbs) 46 / 101.4

Electrical Requirements 230V, 60HzCat. No. AAH62011K

Electrical Requirements 230V, 50HzCat. No. AAH62012K

Standard Accessories

Cold Trap Bath

CTB-10Included Accessories • U-type glass traps 2EA.

Baths & Circulators

Model Description Cat. No.Related accessory U-type Glass Trap AAA62501

19

Accessories & Options

for Shaking & Heating Baths

Universal platforms Flask clamps Dedicated platforms Test tube racks

Baths & Circulators

Universal platforms & Flask clamps The universal platforms provide flexibility for mixing different size test tubes and glassware on a single platform. Flask clamps vailable with

different size clamps for Erlenmeyer flasks. (only for BS series)

BS-06 BS-11 BS-21 BS-31Universal platform Cat. No. AAA44521 AAA44522 AAA44523 AAA44524

Max. mountable flask clamps*Cat. No. Erlenmeyer flask sizeAAA23550 for 50mL 9 12 20 32AAA23551 for 100mL 3 9 15 24AAA23552 for 250ml 2 4 8 12AAA23556 for 300mL 2 4 8 12AAA23553 for 500ml 2 4 6 12AAA23554 for 1L 1 2 4 6AAA23555 for 2L ◊ - 1 2 3AAA23557 for 2.8L ◊ - 1 1 2

◊ 2 and 2.8L flasks must be used with opening the bath cover by height problem.* Flask clamps for Universal platform are each sold separately.

Dedicated platforms If using a single flask size only, the dedicated platforms provided below are maximum capacity of clamps for each platform size; Comes with

clamps installed. Provided are standard clamps with volume sizes of 250mL and 500mL, but it is possible to purchase other size clamps. (only for BS series)

Cat. No. DescriptionAAA44531 universal platform for BS-06 with 250mL flask clamps 2ea onAAA44532 universal platform for BS-06 with 500mL flask clamps 2ea onAAA44541 universal platform for BS-11 with 250mL flask clamps 4ea onAAA44542 universal platform for BS-11 with 500mL flask clamps 4ea onAAA44551 universal platform for BS-21 with 250mL flask clamps 8ea onAAA44552 universal platform for BS-21 with 500mL flask clamps 6ea onAAA44561 universal platform for BS-31 with 250mL flask clamps 12ea onAAA44562 universal platform for BS-31 with 500mL flask clamps 12ea on

※ A dedicated platform is sold with setting each max. mountable amount of flask clamps on.

Test tube racks Highly durable stainless steel racks with adjustable angle and tube height support. No need for any other base plates to use the test tube

racks, simply release and mount racks directly.

Cat. No. Description Insert capacity of racks*AAA44581 for 86 test tubes 8mm dia. (0.3˝)

BS-061EA

BS-112EA

BS-213EA

BS-314EA

AAA44582 for 86 test tubes 10mm dia. (0.4˝)




* No declination※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific requirements. Contact us for details.

20


Transparent polypropylene gable covers Stainless steel flat covers Open-rings Covers

for Baths & Bath Circulators

Baths & Circulators

Transparent polypropylene gable type covers Prevent liquid loss due to evaporation, protect samples from contamination. Made of transparent polypropylene material to observe the

samples and gable type roof accommodates glassware of varying height. (only for BW-H/ B series)

Cat. No. Description Suitable forAAA45531 Transparent polypropylene gable type BW-05H / BW-05BAAA45532 Transparent polypropylene gable type BW-10H / BW-10BAAA45533 Transparent polypropylene gable type BW-20H / BW-20B

Stainless steel flat type covers Made of stainless steel to prevent corrosion and rust. (only for BW-H/ B series)

Cat. No. Description Suitable forAAA45541 Stainless steel flat type BW-05H / BW-05BAAA45542 Stainless steel flat type BW-10H / BW-05BAAA45543 Stainless steel flat type BW-20H / BW-05B

Open-rings covers Beakers or Erlenmeyer flasks can be placed directly onto the perforated stainless steel half-shelf adjuster or water tank bottom. Adjustable

rings size for each glassware to minimize liquid losses due to evaporation. (only for BW-H/ B and BW-G series)

Cat. No. Description Suitable forAAA45521 with 2 openings 80mm dia. (3.1˝) BW-05H / BW-05BAAA45524 with 1 opening 110mm dia. (4.3˝)AAA45522 with 4 openings 80mm dia. (3.1˝)

BW-10H / BW-10BAAA45525 with 2 openings 110mm dia. (4.3˝)AAA45526 with 1 opening 185mm dia. (7.3˝)AAA45523 with 8 openings 80mm dia. (3.1˝)

BW-20H / BW-20BAAA45527 with 6 openings 110mm dia. (4.3˝)AAA45528 with 2 openings 185mm dia. (7.3˝)AAA41561 with 2 openings 80mm dia. (3.1˝) BW-05GAAA41564 with 1 opening 110mm dia. (4.3˝)AAA41562 with 4 openings 80mm dia. (3.1˝)

BW-10GAAA41565 with 2 openings 110mm dia. (4.3˝)AAA41566 with 1 opening 185mm dia. (7.3˝)AAA41563 with 6 openings 80mm dia. (3.1˝)

BW-20GAAA41567 with 4 openings 110mm dia. (4.3˝)AAA41568 with 1 opening 185mm dia. (7.3˝)

Test tube racks Highly durable stainless steel racks with adjustable angle and tube height support. Do not need any other base plates to use it, simply release

and mount racks directly.

Cat. No. Description Insert capacity of racks*AAA44581 for 86 test tubes 8mm dia. (0.3˝)AAA44582 for 86 test tubes 10mm dia. (0.4˝)AAA44583 for 58 test tubes 12mm dia. (0.5˝)AAA44585 for 32 test tubes 16mm dia. (0.6˝)AAA44586 for 19 test tubes 25mm dia. (1.0˝)AAA41531 for 50 test tubes 8mm dia. (0.3˝)AAA41532 for 50 test tubes 10mm dia. (0.4˝)AAA41533 for 33 test tubes 12mm dia. (0.5˝)AAA41535 for 16 test tubes 16mm dia. (0.6˝)AAA41539 for 10 test tubes 25mm dia. (1.0˝)AAA45551 for 176 test tubes 8mm dia. (0.3˝)AAA45552 for 176 test tubes 10mm dia. (0.4˝)AAA45554 for 84 test tubes 12mm dia. (0.5˝)AAA45556 for 68 test tubes 16mm dia. (0.6˝)AAA45561 for 33 test tubes 25mm dia. (1.0˝)

BW-05HBW-05B

BW-10GCW-20G, 30GRW-2025G, 2040G, 3025G, 3040G

BW-20G

1EA 2EA 3EA

BW-05GCW-10G

RW-1025G, 1040G

1EA

BW-10HBW-10B

BW-20HBW-20B

1EA 2EA

21


Spring wire racks Half-shelf adjusters Suction function for pumps

for Baths & Bath Circulators

Baths & Circulators

Spring wire racks Ideal for holding a wide variety of tubes, flasks, and other glassware.

All components are made of stainless steel. (for all models)

Cat. No. Suitable forAAA45502 BW-10H / BW-10BAAA45503 BW-20H / BW-20BAAA41502 BW-10GAAA41503 BW-20GAAA51522 CW-20G / RW-2025G, 2040GAAA51523 CW-30G / RW-3025G, 3040G

Viscometer tube holders Holders for 2 openings viscometer glass tube, made of thermal

endurance material:Bakelite. (only for VB series)

Cat. No. Suitable for

AAA43501 VB-25G (need Max. 5 holders)VB-40G (need Max. 8 holders)

Half-shelf adjusters Stainless steel perforated sample tray shelf with adjustable height support prevents leaks and guards against rust and contamination.

(only for BW-H / B and BW-G series)

Cat. No. Suitable forAAA45511 BW-05H / BW-05BAAA45512 BW-10H / BW-10BAAA45513 BW-20H / BW-20BAAA41551 BW-05GAAA41552 BW-10GAAA41553 BW-20G

for Viscometer Heating Baths

Cooling circulators for visco baths The temperature range of viscometer baths series is from +10 (+50℉) when be used with the additional cooling circulators. (only for VB series)

Cat. No. Suitable for Cooling circulators *AAH57011K VB-25G (230V, 60Hz) RW-1025G (230V, 60Hz)

AAH57012K VB-25G (230V, 50Hz) RW-1025G (230V, 50Hz)



* Refer to P.16-17 for more specific information of the cooling circulators.

Suction function for pumps* Additional suction function for powerful external / internal circulating.

Maximum suction flow rate is 10.0 liters per minute. (only for CW-G and RW-G series)

Cat. No. Suitable for52503 CW-05G / RW-0525G, 0540G52513 CW-10G / RW-1025G, 1040G52523 CW-20G / RW-2025G, 2040G52533 CW-30G / RW-3025G, 3040G

* The additional suction function is needed to have a prior request.

Viscometer tube holders

Cubic Vacuum Desiccators.Round Vacuum Desiccators.

Desiccators

Constructional features • Fitted with an airtight silicon gasket to maintain

a tight vacuum seal without the use of any grease.

• Highly transparent PC (Polycarbonate) strong, great for clear viewing of samples, non-corrosive, easy to clean and maintain.

• The basic component of the drying agent tray and desiccant allows the desiccators to be used in various experiments that involve desiccation.

• Convenient 2-Way stopcock provides a cons-istent and uniformed release of vacuum during operation.

• O-ring and additional exclusively developed “Locking Clip” provide an air tight seal at any vacuum or atmospheric conditions.

(only VDR Series)

• Flange Lock holds the base and top together during non vacuum conditions. (only VDR Series)

• Detachable analog vacuum gauge, fitted at the center of the lid. (optional only VDR Series)

• The heavy-duty desiccators are durably con-structed. (only VDC Series)

• Included are 4 ports for attachment of other vacuum gauges or stopcocks. (only VDC Series)

• To maximize laboratory space the desiccators can be stacked 5 high

(max stacking limit: 5 units - only VDC Series)

Selection Guide

Description Internal volume (L / cu ft) Vacuum range (MPa) Body MaterialCubic type VDC-31 35 / 1.2 1.13 × 10- 4 Mpa (Analog) PC (Polycarbonate)

Round typeVDR-20 (20G) 6 / 0.2

1.13 × 10- 4 Mpa (Analog) PC (Polycarbonate)VDR-25 (25G) 10 / 0.4VDR-30 (30G) 20 / 0.7

* VDR-G Type is with gauge.

23

Round & Cubic Vacuum DesiccatorsDesiccators

Offer reliable vacuum condition: Desiccators holds -0.1 Mpa for 72 hours.

Fitted with an airtight silicon gasket to maintain a tight vacuum seal without the use of any grease.: for safeguards samples, electronics, other high-value items.

Durable Vacuum Desiccators (Transparent models)

Specifications & Ordering Informations Cubic Vacuum Desiccators.

MODEL VDC-31Internal volume (L / cu ft) 35.0 / 1.2Vacuum range (MPa) 0 ~ -0.1 (Analog)

Nozzle (mm / inch, Ø) 9.5 / 0.37Max. permissible vacuum (Bodies) 1.13×10 -4 MPaMax. load (kg / lbs) / for shelf 5.0 / 11.0Number of shelves (included / max.) 3 / 5

Material

Bodies PC (Polycarbonate)

Perforated sample tray PC (Polycarbonate)

Drying agent tray / Locker PP (Polypropylene)

Vacuum seal Silicone Rubber

Dimensions(W×H)

Internal (mm / inch) 355×375×345 / 14.0×14.8×13.6Exterior (mm / inch) 418×398×381 / 16.5×15.7×15.0

Net weight (kg / lbs) 11.5 / 25.4Cat. No. AAAD4011

Round Vacuum Desiccators.

MODEL VDR-20 (20G) VDR-25 (25G) VDR-30 (30G)

Internal volume (L / cu ft) 6.0 / 0.2 10.0 / 0.4 20.0 / 0.7Vacuum range (MPa) 0 ~ -0.1 (Analog)

Nozzle (mm / inch, Ø) 9.5 / 0.37Max. permissible vacuum (Bodies) 1.13×10 -4 MPa

Materiallid / Bottom PC (Polycarbonate)

Tray, Locker PP (Polypropylene)

Vacuum seal Silicone Rubber

Dimensions(W×H)

Exterior(mm / inch)

Ø286×279 / Ø11.3×11.0 Ø353×325 / Ø13.9×12.8 Ø427×399 / Ø16.8×15.7 (Ø286×354 / Ø11.3×13.9 ) (Ø353×400 / Ø13.9×15.7) (Ø427×475 / Ø16.8×18.7)

Net weight (kg / lbs)

1.5 / 3.3 2.5 / 5.5 4.2 / 9.3(1.7 / 3.7) (2.6 / 5.7) (4.3 / 9.5)

Cat. No.without gauge AAAD2011 AAAD2111 AAAD2211with gauge (G types) AAAD2021 AAAD2121 AAAD2221

for Cubic & Round Vacuum Desiccators.Cat. No. DescriptionAAAD1501 VDE-501 Drying Agent Tray for VDR-20 Series

AAAD1502 VDE-502 Drying Agent Tray for VDR-25 Series

AAAD1503 VDE-503 Drying Agent Tray for VDR-30 Series

VDC0005 Drying Agent Tray for VDC-31

AAAD1511 VDE-511 Perforated Sample Tray for VDR-20 Series



VDC0003 Perforated Sample Tray for VDC-31

VDR0004 VDR-0001 Silicagel for VDR-20 Series (20g)

VDR0005 VDR-0002 Silicagel for VDR-25, 30 Series (40g)

Cat. No. DescriptionVDR0001 Vacuum Seal for VDR-20 SeriesVDR0002 Vacuum Seal for VDR-25 SeriesVDR0003 Vacuum Seal for VDR-30 SeriesVDC0015 Vacuum Seal for VDC-31VDR0015 Flange Locker for VDR-20 SeriesVDR0016 Flange Locker for VDR-25 SeriesVDR0017 Flange Locker for VDR-30 SeriesEDA4300 Vacuum gauge for VDR SeriesEDA4214 Vacuum gauge for VDC-31AAAD1521 Stopcock for VDR SeriesAAAD1522 Stopcock for VDC-31

Clean Benches.Ductless Fume Hoods.PCR Workstations.UV Sterilization Cabinets.

Fume Hoods

Selection GuideFume Hoods

Description Filter Work Surface Page

Clean BenchesBC-01E

HEPA Filter Stainless Steel #304 26BC-11EBC-21E

Ductless Fume HoodsDLH-01G Optional 6

Different FiltersOptional 6 DifferentWork Surface 30

DLH-11G

PCR WorkstationsPW-01

HEPA Filter Acryl 10 mm / 0.39 inch(Clear type) 34PW-11

PW-21

UV Sterilization CabinetsUVC-01

- Stainless Steel #304 34UVC-11UVC-21


for Clean Benches 29for Ductless Fume Hoods 33for PCR Workstations & UV Sterilization Cabinets 37


Fume Hoods BC-Series PW-Series DLH-Series

Asbestos Handling • •Chemical sampling •Chemical preparationin an electron microscopy or histology laboratory,forensic, and pharmaceutical applications, depending on the solvents used

•

Cosmetic production to photochemical •Dental laboratory •Electronics Inspection / Repair • •Fingerprinting •General Forensics • • •Medical device assembly •Non-biohazardous [Tissue] Culture Maintenance • •

Non-toxic IV Solution Preparation • •Numerous vapor-generating laboratory processes (HPLC preparation and biochemistry protocols can be performed with improved safety and comfort)

•

PCR •Plant Tissue Culture Maintenance • •Powder extraction •QA / QC Testing • • •Slide preparation •Staining with Volatile •Sterile Media Preparation •Syringe filling •Sterile Media Preparation •Tissue Fixation / Staining Preparation • •Touch up painting •Volatile Radiolabeling / Tagging • •Weighing Toxic Powders • •Welding fumes •

* For general purpose use and storage applications.

Technical BenefitsClean benches Ductless fume hoodsSafety functions - 2 separated over- current fuses for user safety. - Toggle switch provided can be selective one of

them. (UV, off, and fluorescent)

- Automated UV lamp switch off when unintended window opening.

- Tempered glass sliding sash window and intercept the UV light for user safety.

- Permanent magnehelic differential pressure gauge displays across the HEPA filter to check the air changes. (optional)

- Using a 99.99% efficient supply HEPA filter.

Ideal construction - Optimum PWM (pulse width modulation) control

performance. - As a blower of large enough capacity is adapted,

sufficient intake flow rate is maintained and noise is reduced.

- Dirt-repellent surface external powder coating.- Light and blower switches are within easy reach

of the user.- Great chemical resistance work surface (#304) with

various organic solvents.

Ideal construction - Front windows part can be seeing through made

by transparent acryl.- Lower Stand mounted fixable casters easy for

moving & fixing. (Optional)- Control Panel : Consist of fluorescent lamp, Fan

Start/Stop, Blower speed controller, alarm, menu and etc.

- Over - current circuit CP (Circuit Protector) for user safety. - Anemometer: Visual for the input air velocity at real

time.- Door Stay : Fixture to fix it when door open at 2 step.

(if it's dropped without backing up, result in damage, and Fixing magnetic enable to open hold it to 1 step-door.)

PCR workstations & UV Sterilization CabinetsIdeal construction - Built-in over-current products for user safety.- Intelligent Digital controller.

(timer, alarm, blower speed (PW-series)) - Pre-filter mounted extends the life of the filters.

(PW-series)- High quality 99.99% efficient supply HEPA filter.- Powerful, uniformly distributed, UV-C.

(average 8,000 hours) - Excellent chemical resistance work surface.

(UVC-series)- Automated UV lamp switch off.

26

Clean Benches

※ Product design subject to change without notice.

BC-11EOptional Accessories •Standwithcaster.

see page 29 •Differentialpressuregauge.

Please visit .comFor further information on Jeio Tech´s Fume Hood products Information is readily available on our website.

Fume Hoods

27

Vertical type laminar flow clean bench!ISO 14644-1 Class 4 air. (formerly Class 10 per Federal Standard 209E)Supply HEPA filter, high efficient for particles beginning at size 0.3micron. Nominal downflow velocity of 0.3m/s. (60fpm)Ergonomic 5 degree sloped front for comfort.

Control panel

Service Fixtures (Optional)

Gas

Vacuum

Air

Filtration features Particle-free ISO 14644-1 Class 4 air

• Particle count in the work area conform to ISO Class 4 conditions (formerly Class 10 per Federal Standard 209E). Supply HEPA filter, 99.99% efficient on particles 0.3 micron.

• Polyester fiber pre-filter that has a minimal pressure loss and 85% arrestance on the A.F.L. test which serves to trap larger particles and increase the life of the main filter.

• Neoprene gaskets ensures that the HEPA filter is airtight to the body unit. ※The HEPA filters life span depending on the test room conditions has a life span about 3 years.

Constructional features Ergonomic design

• Angled front profile is free of protrusions that will not interfere with visibility or obstruct tall users.

• 304 grade stainless steel work surface - Highly durable and rust free work zone, made for easy cleaning.

• Use of tempered glass door to be strong of damage and intercepts the UV light for user safety.

• The door smoothly slides up and down and stops at any height useful for protecting the user when used at a proper level or for easy transportation of experimental apparatuses and equipments into the workspace.

• Right and left both sides also have wide glasses windows for a clear viewing.

• Adjustable blower located by the front blower switch.

Lighting • Electronically ballasted FL lamp is installed on the top center roof inside the hood that

minimizes airflow disturbance and shadows in the work zone, and to relieves eye strain.

• Toggle switch provided can be set up to turn On/Off UV, off, and fluorescent functions, so one can make sure that the user is safely protected from careless switching on UV & fluorescent lamps at the same time.

Clean Bench Airflow Profile • Room air is taken in from the top blower of the bench through a disposable pre-filter.

• The filtered air is first purified by the secondary HEPA filter to confirm to class standards.

• The laminar down-flowing air is supplies from the dual filtering system into the working zone.

• The clean bench work zone easily maintains a high sterile condition due to positive pressure preventing outside contaminants.

• The purified air flows across the work zone in the cabinet in a vertical, unidirectional stream and leaves the main work chamber across the entire open front of the cabinet and in through the slots.

Clean Benches Fume Hoods

28

Dimensions (Model: BC-11E)

Clean Benches Fume Hoods

1. Pre-Filter 2. Blower 3. HEPA Filter 4. UV Lamp 5. Fluorescent Lamps 6. Tempered Glass Side Panel 7. Service Fixture 8. Sliding Front Sash Window 9. Electrical Outlet socket 10. Stainless Steel Grade 304 Work Surface11. Blower Speed Controller 12. Differential pressure gauge

Air flow Diagram

9

10

11

1

2

34

5

8

6

7

12


Model BC-01E BC-11E BC-21EAir Flow Type Vertical flowAir Volume (Minimum / Maximum) 274 to 914 cmh / 119 to 399 cfmLaminar Airflow Velocity (m / s / fpm) 0.3 / 60Air Cleanliness Within Working Area ISO 14644-1 Class 4, US Federal Standard 209E Class 10

FiltersHEPA Filter Typical efficiency of 99.99% at 0.3㎛ US MIL - STD -282

; Micro glass fiber Media, Particle board, AL separator, Neoprene gaskets

Pre-Filter Polyester fibers with an efficiency of 85% (A·F·I TEST) ; AL frame, Polyester fiber MediaNoise Level Typically < 67dBA at initial Blower speed

MaterialsMain Body Stainless steel grade 304 & Steel powder coatingWork Surface Stainless steel grade 304Windows (Front / Side) Colorless and transparent UV absorbing 5mm tempered glass

IlluminationIntensity (lux) >1000FL lamp (W) 30W×2EA electronically ballasted FL LampUV lamp (W) 30W electronically ballasted UV Lamp

Electric Socket Outlets 230V socket, 120V socket

Dimensions (W×D×H)

Internal (mm / inch) 970×540×570 / 38.2×21.3×23.2 1270×540×570 / 50×21.3×23.2 1870×540×570 / 73.6×21.3×23.2External Without Stand (mm / inch) 1040×630×1060 / 40.1×24.8×42.7 1340×630×1060 / 52.8×24.8×42.7 1940×630×1060 / 76.4×24.8×42.7External With Stand (mm / inch) 1040×630×1780 / 40.1×24.8×70.1 1340×630×1780 / 52.8×24.8×70.1 1940×630×1780 / 76.4×24.8×70.1Weight (Body) (kg / lbs) 110 / 242.5 110 / 242.5 110 / 242.5Weight (Body+Stand) (kg / lbs) 130 / 302 150 / 330.7 190 / 418.9

Electrical Requirements (230V) 60Hz / 1ph / 1.7A 50Hz / 1ph / 1.82A 60Hz / 1ph / 1.7A 50Hz / 1ph / 1.82A 60Hz / 1ph / 1.7A 50Hz / 1ph / 1.82ACat. No. AAHA4011K AAHA4012K AAHA4021K AAHA4022K AAHA4031K AAHA4032KElectrical Requirements (120V) 60Hz / 1ph / 3.48A 60Hz / 1ph / 3.48A 60Hz / 1ph / 3.48A Cat. No. AAHA4013U AAHA4023U AAHA4033U

29

for Clean Bench

Accessories & Options for Clean Benches

HEPA Filter (1EA included)

- 99.99% efficient HEPA filter, industry standard size for economical replacement.

Electric Sockets (optional)

- Provided included a conveniently placed power source for small devices or equipment used within the cabinet. Two style of outlets are avail-able; 120V and 230V outlets.

Pre-Filter (1EA included)

- Replaceable pre-filter, to trap larger particles, extends HEPA filter life.

Differential Pressure Gauge (optional)

- Permanent magnhelic pressure differential gauge display across the HEPA filter to check the air changes.

UV Lamp (optional)

- For secondary method of decontamination while the bench is not in use.

Fume Hoods

Basic Stand (optional)

- Economical basic stand without casters made of powder coated steel.

Stand with Casters (optional)

- For easy transport with casters made of powder coated steel.

Service Fixture (optional)

- Conveniently hook up source a Gas/ Vacuum/ Air source within the working area.

- CSA limited (Canadian Standards Association)

Accessories for BC-01 / 11 / 21E

Cat. No. DescriptionAAAB1501 BCE-501 HEPA Filter for BC-01EAAAB1502 BCE-502 HEPA Filter for BC-11EAAAB1503 BCE-503 HEPA Filter for BC-21EAAAB1511 BCE-511 Pre Filter for BC-01EAAAB1512 BCE-512 Pre Filter for BC-11EAAAB1513 BCE-513 Pre Filter for BC-21EAAAB1521 BCE-521 Basic Stand for BC-01EAAAB1522 BCE-522 Basic Stand for BC-11EAAAB1523 BCE-523 Basic Stand for BC-21EAAAB1531 BCE-531 Stand with casters for BC-01E

※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific needs. Please contact Jeio Tech for details.

Cat. No. DescriptionAAAB1532 BCE-532 Stand with casters for BC-11EAAAB1533 BCE-533 Stand with casters for BC-21EAAAB1541 BCE-541 UV lamp for BC-01E (230V)AAAB1542 BCE-542 UV lamp for BC-01E (120V)AAAB1543 BCE-543 UV lamp for BC-11E (230V)AAAB1544 BCE-544 UV lamp for BC-11E (120V)AAAB1545 BCE-545 UV lamp for BC-21E (230V)AAAB1546 BCE-546 UV lamp for BC-21E (120V)AAAB1551 BCE-551 Electrical socket for BC-01/11/21EAAAB1561 BCE-561 Gas cock for BC-01/11/21EAAAB1571 BCE-571 Differential pressure gauge for BC-01/11/21E

30

Ductless Fume Hoods

DLH-01G Optional Accessories •Standwithcaster. •Differenttypesofchemicalfilters. see page 33 •6Differenttypesofworksurfaces.

Fume Hoods


31

Ductless Fume Hoods

Ductless Fume Hoods are manufactured and gonethrough a complete safety tests of rigorouslyinternational standards.

Constructional features • Internal airflow speed in the workspace can be identified with

attached anemometer. Airflow speed can be controlled by identifying varying wind speeds in accordance with the surroun-ding environments and filter conditions.

• Connection with a separate exhaust system is not required, since the hood uses reticulating air flow by discharging the filtered air into the laboratory.

• Other types of filter cartridges can be easily replaced by opening the upper cover located in the front.

• Front sash can be fully opened or fixed for easy transportation of experimental apparatuses and equipments into the workspace.

• A utility hole is manufactured in the fume hood, for use of appa-ratuses inside the hood allows for easy connection of power source or other cable outport sources outside the hood.

• A blower of large enough capacity is adopted into the equipment so sufficient intake air flow rate is maintained to reduce noise.

• A fluorescent light is provided outside the workspace so that the air flow is not hindered, prevents contamination of reagents and the illumination intensity is maintained.

• Various filters and work surfaces are available to fit your experimental needs. (Refer to accessory section)

Reliable Test : Efficiency, Capacity of Activated carbon filters tested according to

BS 7989:2001 : Structure, Electrical outlet, Lighting, Sound level tested according to

BS 7258-1:1994 : Local smoke, Large volume visualization, Face velocity, Tracer gas

tested according to ANSI / ASHRAE 110-1995, NF EN 14175-1

Selection for Chemical Filter

Code Filter Name ApplicationGF Activated carbon Filter All common laboratory chemicals, especially VOC, Organic, Benzene, Toluene, etcAC Acid Filter An acidic solvent; Acetic acid, Hydrochloric acid, etcHF Halogen Compound Filter Halogen compounds like Chlorine, Flourine, Iodine, Bromine, Astatine, etcFF Formaldehyde Filter Formadehyde applicationsAM Ammonia / Amine Filter Ammonia / Amines by chemisorptions

HEPA HEPA Filter The filtration efficiency of 99.99% at 0.3 microns For trapping biohazardous aerosols and other visible and non visible particles

Digital controller

Utility hole

Anemometer

Front cover

Fume Hoods

32

Ductless Fume Hoods

1. Exhaust Hole 2. Pre-filter 3. Front cover 4. Blower 5. Control Panel 6. Chemical filter 7. F.L. Lamp (INNER) 8. Anemometer 9. Front Door 10. Side viewing Panel 11. Door Opening Fixed Magnet 12. Utility Hole

Dimensions (Model: DLH-01G)

Fume Hoods

9

10

11

1

2

3 4

5

8

6

7

12

Air flow Diagram


Model DLH-01G DLH-11GFume Hood Type Ductless

Permissibleenvironmental condition

Temperature 5℃ to 40℃Maximum relative humidity 80%

Altitude up to 2,000m

Controller Microprocessor controlFace Velocity Initial set point : 0.4m/s, 80fpmAir flow meter Swing Vane TypeMain Filter Chemical Filter (Optional 6 Different filters)

Pre-filter Washable High efficiency nylon filter

MaterialsMain body 2.0mm steel (Epoxy powder-coated)

Work surface Optional 6 Different work surfacesWindow (Front / Side) Acryl 8mm / Acryl 6mm

Fluorescent Light Intensity > 600lux Sound Emission 55dB at Normal Operation

Dimensions(W×D×H)

Internal (mm / inch) 880×640×800 / 34.6×25.2×31.5 1180×640×800 / 46.5×25.2×31.5External Without Stand (mm / inch) 900×660×1248 / 35.4×26×49.1 1200×660×1248 / 47.2×26×49.1External With Stand (mm / inch) 900×660×1953 / 35.4×26×76.8 1200×660×1953 / 47.2×26×76.8Weight (Body) (kg / lbs) 100 / 220.5 118 / 260.1Weight (Body+Stand) (kg / lbs) 120 / 264.6 140 / 308.6

Electric requirement AC 230V, 60Hz / 0.7ACat. No. AAAB2001 AAAB2011Electric requirement AC 230V, 50Hz / 0.6ACat. No. AAHB2002K AAHB2012KElectric requirement AC 120V, 60Hz / 1.3ACat. No. AAHB2003U AAHB2013UElectric requirement AC 100V, 50Hz / 1.5ACat. No. AAHB2004U AAHB2014U

33

Accessories & Options for Ductless Fume Hoods

Gas Detector and Tubes Filters

Work Surfase Stand with Caster

for Ductless Fume Hoods

Fume Hoods

Accessories for DLH-01G / 11G

Cat. No. DescriptionAAAB2521 Stand with casters for DLH-01G

AAAB2522 Stand with casters for DLH-11G

EDA9191 GF Activated carbon filter for DLH-01G

EDA9192 GF Activated carbon filter for DLH-11G

EDA9199 AC Acid filter for DLH-01G

EDA9200 AC Acid filter for DLH-11G

EDA9201 HF Halogen compounds filter for DLH-01G

EDA9202 HF Halogen compounds filter for DLH-11G

EDA9203 FF Formaldehyde filter for DLH-01G

EDA9204 FF Formaldehyde filter for DLH-11G

EDA9205 AM Ammonia / Amines filter for DLH-01G

EDA9206 AM Ammonia / Amines filter for DLH-11G

EDA9193 HEPA filter for DLH-01G

EDA9194 HEPA filter for DLH-11G

EDA9196 Prefilter for DLH-01G

EDA9198 Prefilter for DLH-11G

AAAB1531 BCE-531 Stand with casters for BC-01E

※ Above spec can be changed without prior notice.

Cat. No. DescriptionAAAB2501 Work surface (SUS #304) for DLH-01GAAAB2502 Work surface (SUS #304) for DLH-11GAAAB2503 Work surface (SUS #316L) for DLH-01GAAAB2504 Work surface (SUS #316L) for DLH-11GAAAB2505 Work surface (Ceramite) for DLH-01GAAAB2506 Work surface (Ceramite) for DLH-11GAAAB2507 Work surface (Polypropylene) for DLH-01GAAAB2508 Work surface (Polypropylene) for DLH-11GAAAB2509 Work surface (Bakelite) for DLH-01GAAAB2510 Work surface (Bakelite) for DLH-11GAAAB2511 Work surface (PVC) for DLH-01GAAAB2512 Work surface (PVC) for DLH-11GAAAB2531 Gas Detector (KITAGAWA AP-20)

EAA1550 Gas Detecting tube (Benzene, GASTEC-121SP (0.5-10ppm))

EDA9207 Gas Detecting tube (Toluene, GASTEC-122L (1-100ppm))

EAA1552 Gas Detecting tube (Acetic acid, GASTEC-81L (0.125-25ppm))

EAA1553 Gas Detecting tube (Chloroform, GASTEC-137 (4-400ppm))

EAA1554 Gas Detecting tube (Formaldehyde, GASTEC-91LL (0.05-1ppm))

EAA1555 Gas Detecting tube (Ammonia, GASTEC-3L (0.5-60ppm))

34

PCR Workstations & UV Sterilization cabinetsFume Hoods


PCR Workstation Included Accessories •HEPAFilter

See page 37 •Pre-Filter •UVLamp •FluorescentLamp

UV Sterilization cabinet Included Accessories •UVLamp

See page 37 •FluorescentLamp

35


Using a HEPA filter provides an effective particulate-free working space for ambient environment conditions. – PW series

High quality UV lamp with a timer control feature is great for sterilizing the workspace before carrying out sensitive or PCR experiments. - UVC series

Constructional features

Effective sterilization 254nm ultraviolet lamp and Fluorescent lamp.

• Adjustable UV-timer for precise control of decontamination. - The variable digital timer for UV exposure with detail settings by

second. (Delay OFF: Max. 30min) - Long life (Up to 8,000 hour) UV lamp.

• Anti-glare fluorescent lamp is installed on the center ceiling of the work space area, minimizing shadows and relieves eye strain.

User-Friendly Control System • Microprocessor-based control system. • Bright and vivid LCD (PW - series) or VFD (UVC - series) display with

responsive touch buttons. • Easily indicating the total use time and operating time on the

screen.

A reliable interlock safety system • An audible alarm for product and sample protection against UV

over exposure. • For safety UV-opaque and resistant 99.99%, thick acryl front, back

and sides. • Automatic UV lamp safety shut OFF, in case the door is opened,

which prevents accidental UV exposure. • 304 grade stainless steel work surface - Highly durable and rust

free work zone, made for easy cleaning. (UVC-series)

• Self-protection against over-current.

Additional features

Filtration features (PW-series)

• Particle-free ISO 14644-1 HEPA filter (Class 4 conditions) - Using a 99.99% efficiency HEPA filter that filters particle sizes

of 0.3 micron and greater, traps biohazardous aerosols, and provides a particulate-free work environments that minimizes cross contamination.

• Neoprene gaskets ensures that the HEPA filter is airtight to the body unit.

- The HEPA filters life span depending on the test room conditions has a life span of 3 years.

• Replacing of the HEPA filter can easily be replaced by opening the upper cover, located in the front.

• Polyester fiber pre-filter that has minimal pressure loss and 85% arrestance on the A.F.L. test which serves to trap larger particles and increases the life of the main filter.

• Adjustable digital blower speed switch located in the front with use of large capacity blower is adopted into the equipment.

PCR Workstations

Digital controller

Air flow

UV Sterilization cabinet

Digital controller

36



PCR Workstations

Model PW-01 PW-11 PW-21

Air Flow type Vertical

Max. air volume (cmh / cfm) 557 / 327 697 / 408 929 / 546

Min. air volume (cmh / cfm) 167 / 97 209 / 121 279 / 162

Laminar airflow velocity (m / s / fpm) 0.3 / 60

Filter

Air cleanliness ISO 14644-1Class 4

HEPA Filter Typical efficiency of 99.99% at 0.3 ㎛ US MIL -STD -282 ; Micro glass fiber Media, Particle board, AL separator, Neoprene gaskets

Pre-Filter Polyester fibers with an efficiency of 85% (A·F·I TEST); AL frame, Polyester fiber Media

Noise level (dBA) Typically < 60 dBA at initial Blower speed

MaterialWork Surface Acryl 10mm (Clear type)

Window (Front, Side / Back) Acryl 8mm / 10mm (Clear type)

Illumination

IntensityFL lamp (lux) >1000

UV Density (㎼/cm2) 165 185 330

CapacityFL Lamp 15W×1EA 20W×1EA 30W×1EA

UV Lamp 15W×1EA 20W×1EA 30W×1EA


Interior (mm / inch) 700×585×602 / 27.5×23×23.7 880×585×602 / 34.6×23×23.7 1180×585×602 / 46.5×23×23.7

Exterior (mm / inch) 720×605×964 / 28×24×38 900×605×964 / 35.4×24×38 1200×605×964 / 47.2×24×38

Weight (Body) (kg / lbs) 56.2 / 123.9 64.2 / 141.5 77.8 / 171.5

Electric requirement (230V) 60Hz, 1.3A 50Hz, 1.3A 60Hz, 1.4A 50Hz, 1.4A 60Hz, 1.5A 50Hz, 1.5A

Cat. No. AAHB3001 AAHB3002 AAHB3011 AAHB3012 AAHB3021 AAHB3022

Electric requirement (120V) 60Hz, 2.2A 60Hz, 2.7A 60Hz, 2.9A

Cat. No. AAHB3003 AAHB3013 AAHB3023


UV Sterilization cabinet

Model UVC-01 UVC-11 UVC-21

Illumination

IntensityFl lamp (Lux) >800 >900 >1000

UV Density (㎼ / ㎠) 150 385 450

CapacityFl lamp 8W×1ea 15W×1ea 20W×1ea

UV lamp 8W×1ea 15W×1ea 20W×1ea

MaterialWork Surface Stainless steel grade 304

Window (Front, Back / Side) Acryl 5 mm (Clear type)


Interior (mm / inch) 433×500×468 / 17.0×19.7×18.4 583×500×468 / 23.0×19.7×18.4 880×500×468 / 34.6×19.7×18.4

Exterior (mm / inch) 450×509×610 / 17.7×20.0×24.0 600×509×610 / 23.6×20.0×24.0 900×509×610 / 35.4×20.0×24.0

Weight (Body) (kg / lbs) 15.0 / 33.1 17.5 / 38.6 20.0 / 44.1

Electric requirement (230V) 60Hz, 0.1A 50Hz, 0.1A 60Hz, 0.2A 50Hz, 0.2A 60Hz, 0.3A 50Hz, 0.3A

Cat. No. AAHB4001 AAHB4002 AAHB4011 AAHB4012 AAHB4021 AAHB4022

Electric requirement (120V) 60Hz, 0.2A 60Hz, 0.4A 60Hz, 0.6A

Cat. No. AAHB4003 AAHB4013 AAHB4023

※ Above spec can be changed without prior notice.

37

Accessories & Options for PW / UVC seriesFume Hoods

General UV dose and time required

PathogenAverage UV dose

required (㎼ . s/㎠)

Average UV time required (㎼/ ㎠ /sec.)

PW-01 UVC-01 PW-11 UVC-11 PW-21 UVC-21165 150 185 385 330 450

S. enteritidis 4,000 25 27 22 10 13 9

B. megatherium sp. (spores) 2,730 17 18 15 7 9 6

B. subtilis 7,100 43 47 39 18 22 16

Eberthella typhosa 2,140 13 14 12 6 7 5

Escherichia coli (E. coli) 3,000 19 20 17 8 10 7

Micrococcus candidus 6,050 37 40 33 16 19 13

Proteus vulgaris 2,640 16 18 15 7 8 6

Pseudomonas aeruginosa 5,500 34 37 30 14 17 12

Pseudomonas aeruginosa 3,500 22 23 19 9 11 8

S. typhimurium 8,000 49 53 44 21 25 18

Shigella paradysenteriae 1,680 101 11 10 4 6 4

Spirillum rubrum 4,400 27 29 24 11 14 10

Staphylococcus albus 1,840 12 12 10 5 6 4

* Environment Condition : temperature 20~25℃, Relative humidity 60%* General purpose use and average disinfection applications

Accessories for PW - 01/11/21

Cat. No. Description

EDA9219 HEPA filter for PW-01



CHE4436 Lighting Lamp for PW-01



CHE4431 UV Lamp for PW-01



Accessories for UVC- 01/11/21


CHE4435 Lighting Lamp for UVC-01



CHE4434 UV Lamp for UVC-01



HEPA Filter

Pre-Filter

Only for PW Series

PW and UVC Series

UV Lamp

Fluorescent Lamp

General Incubators.Low Temperature Incubators. Low Temperature Personal Incubators. Incubated & Refrigerated & Illuminated Shakers.

Incubators

Selection GuideIncubators

DescriptionOperating

Temp. Range(℃/℉)

ChamberVolume

(L /cu ft)

TemperatureFluctuation

at 37℃ [±℃/℉]

TemperatureVariation

at 37℃ [±℃/℉]

Page

Generaltype

IB-05GAmb. +5 to 70/ Amb. +9 to 158

60 / 2.10.1 / 0.18

0.6 / 1.08 40IB-15G 102 / 3.6 0.2 / 0.36

IB-25G 151 / 5.3 0.2 / 0.36 0.6 / 1.08

Economic type

IB-01E Amb. +3 to 60/ Amb. +5.4 to 140

65 / 2.3 0.2 / 0.36 0.6 / 1.0841IB-11E 150 / 5.3 0.3 / 0.54 0.8 / 1.44

IB-21E 205 / 7.2 0.1 / 0.18 1.1 / 1.98

Low Temperature Incubators



ChamberVolume (L /cu ft)

TemperatureFluctuation

at 37℃[±℃/℉]


at 37℃[±℃/℉]Page

Convectiontype

IL -11 0 to 60/ +32 to 140

150 / 5.30.1 / 0.18

0.5 / 0.942

IL -21 224 / 8.6 0.4 / 0.72

Air Jacket type

IL -11A +4 to 60/ +39.2 to 140

162 / 5.7 0.2 / 0.36 0.5 / 0.9 44

IL -21A 254 / 9.0

Personal type

ILP -02 10~40℃ at ambient temperature 25℃

14 / 0.50.1 / 0.18

0.5 / 0.945

ILP -12 48 / 1.7 0.4 / 0.72

Incubated & Refrigerated & Illuminated Shakers



Speed Range[RPM]

MaximumAmplitude Size (dia)

Page

Benchtoptype

SI-300Incubated Shakers Amb. +5 to 60

/ Amb. +9 to 140

10 to 300

40mm(1.6” dia) 46

SI-600SI-300R Incubated & Refrigerated

Shakers+15 to 60 / +59 to 140SI-600R

Floor type

IS-971 Incubated Shakers Amb. +5 to 60/ Amb. +9 to 140

70mm(2.8” dia) 48IS-971R Incubated & Refrigerated

Shakers+4 to 60 / +40 to 140

IS-971RF Incubated & Refrigerated & Illuminated Shakers

Amb. -15 to 60 / Amb. -27 to 140

Chambertype

SIF-5000Incubated Shakers Amb. +5 to 80

/ Amb.+9 to 17610 to 300 (Stackable Top : 10 to 250)

19 mm dia(0.75” dia)

50SIF-6000 25 mm dia

(1.0” dia)

SIF-5000R Incubated & Refrigerated Shakers

Amb. -20 to 80 / Amb. -36 to 176

19 mm dia(0.75” dia)

SIF-6000R 25 mm dia(1.0” dia)


for Incubators52 - 54

for Incubated & Refrigerated & Illuminated Shakers

Safety functions1) Self-protecting cut-off function and signal - For over temperature, the power supply is


- 2 separate over-current fuses for user safety.

2) Time setting function for automated ON / OFF. - Integrated time setting: Delayed ON / OFF. (from 1 min to 99 hr 59 min) - Operating settable function: After a power inter-

ruption, select automated run or manual run.

3) Door-open warning alarm : - Intermittent tone and optical signal alarm 5 min.

after automated cut-off. - Heating element and fan automaically stop

when door opening to minimize heat loss and protect operator.

Optimum control performance1) Profession electronic controls and program control. - Microprocessor PID temperature control with

very simple calibration and auto-tuning features. - Conveniently preset 3 most commonly used

temperature settings. - Select between Celsius and Fahrenheit. - Self-diagnostic function identifies any errors and

advises the user with the correct procedure.

2) Applicable control display considering HMI (Human Machine Interface) network system :

- Very similar key arrangement throughout the whole temperature chambers, bath circulators and shakers series.

- Operator-friendly controller with the splash-proof / easy-to-clean keypads and clear LED displays.

- A quick lock button prevents accidental resetting of parameters. (Only incubatator series)

- Shaker and lamp mechanism have their own ON / OFF switch for independent incubation.

(Only SI, SIF, IS-971RF series)

Ideal construction 1) High quality 304 grade stainless steel inner cha-

mber and dirt-repellent powder coating external surface.

2) Perfectly sealed door gasket minimizes heat loss and fully insulated chambers keep the exterior at a safe temperature.

3) Adjustable stainless steel and electro polished wire shelves allows for better air-flow and allow for easy clean. (Only IB, SIF series)

Technical Benefits

General ApplicationsGeneral applications

General, Low temp. & Low temp. personal Incubators

Incubated & Refrigerated & Illuminated Skakers

IB series IL series ILP series SI & SIF series IS seriesAntibody Testing • • •Bacterial Research • •Bacterial suspensions • •Chemical Storage • •Chick Embryo Studies • •Clinical Science • • •Cultivating Low Temperature Microbesand Plant Cells •

Crystallization Studies • •Cultivating Thermophilic Bacteria •Drying And Staining Procedures • •Denaturalizing Tests for Food • •Environmental technology(waste water and soil analysis) • •

Enzyme Digestion Studies • •Extraction procedures • •Fermentation(Pharmacy and biotech -DNA and Enzymes) • •

General mixing • •Hematological Testing • • •Histochemical Procedures • •Measuring COD/ BOD •Medical researches. (Diagnostic tests) • •Microbiological Determinations • • •Microorganism • • •Molecular biology • •Organism Germs for Life Science • • •Organism Pharmacy • • •Paraffin Embedding • •Pharmaceutical Stability Testing •Plasmid purification • •Protein expression in bacteria • •Solubility • •Staining and destaining • •Tissue Culturing • • •

* General purpose use and storage applications

40

Incubators - General type

Exclusive gravity convection type incubators for all laboratory purposes.IB-G series are the most useful incubators for general purpose use air-jacketed convection style for excellent temperature variation without external air disturbance.

Operating features • U+5℃ above room temperature to 70℃. • Microprocessor PID control / Auto-tuning / Calibration. • Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. • Over-temperature limiter / Door open alarm. • 3 different temperature values memorable. • Digital LED display (0.1℃ resolution) using touch-sensitive keypads. • RS-232 interface available.

Constructional features • Fully insulated dual-wall door with rubber magnetic seal gasket

keeps setting temperature. • Stackable two high using the stacking kit. (optional)

• Optimized sample inspection through a tempered inner glass door without affecting the chamber temperature.

• Detachable shelves and rounded inner chamber corners for easy cleaning.

• Highly durable incoloy heating element with fins that guarantee better radiation.

• Attach other electric instruments to the inside of the chamber through a side cable port.

• Cable port allow for control of the amount of airflow in the cha-mber. (dia 38mm/1.5℃, Provided silicon or rubber cap)

IB-05G Included Accessories •2wireshelves

Optional Accessories •Perforatedshelves see page 52 •Stackingkitsforstackablechambers

Incubators


Model IB-05G IB-15G IB-25GChamber Volume (L / cu ft) 60 / 2.1 102 / 3.6 151 / 5.3

TemperatureRange (℃ / ℉) Amb. +5 to 70 / Amb. +9 to 158Fluctuation 1) (±℃ / ℉) at 37℃ 0.1 / 0.18 0.1 / 0.18 0.2 / 0.36Variation 1) (±℃ / ℉) at 37℃ 0.6 / 1.08 0.2 / 0.36 0.6 / 1.08

Dimensions(W×D×H)

Interior (mm / inch)400×360×420 / 15.7×14.2×16.5

480×410×520 / 18.9×16.1×20.5

610×460×540 / 24×18×21.3

Exterior (mm / inch)595×555×745 / 23×22×29

675×605×855 / 27×24×34

805×655×885 / 32×26×35

Net weight (Kg / lbs) 45 / 99 55 / 121 62 / 136Electrical Requirements (230V, 50 / 60Hz) 1.3A 2.2A 3.1ACat. No. AAH21162K AAH21172K AAH21182KElectrical Requirements (120V, 50 / 60Hz) 2.8A 4.6A 6.4ACat. No. AAH21166U AAH21176U AAH21186U


41


Model IB-01E IB-11E IB-21EChamber Volume (L / cu ft) 65 / 2.3 150 / 5.3 205 / 7.2

TemperatureRange (℃ / ℉) Amb. +3 to 60 / Amb. +5.4 to 140Fluctuation 1) (±℃ / ℉) at 37℃ 0.2 / 0.36 0.3 / 0.54 0.1 / 0.18Variation 1) (±℃ / ℉) at 37℃ 0.6 / 1.08 0.8 / 1.44 1.1 / 1.98

Dimensions(W×D×H)

Interior (mm / inch)423×355×445 / 16.7×14×17.5

500×515×585 / 19.7×20.3×23

632×515×630 / 24.9×20.3×24.8

Exterior (mm / inch)533×475×725 / 21×18.7×28.5

595×630×865 / 23.5×24.8×34

740×630×910 / 29.1×24.8×35.8

Net weight (Kg / lbs) 33 47 57Electrical Requirements (230V, 50 / 60Hz) 1.1A 2.2A 2.4ACat. No. AAH26015K AAH26025K AAH26035KElectrical Requirements (120V, 50 / 60Hz) 2.1A 4.2A 4.6ACat. No. AAH26016U AAH26026U AAH26036U


Incubators - Economic type

Space saving design and dependable, trouble-free heating system.

Operating features • +3℃ above room temperature to 60℃. • Microprocessor PID control / Auto-tuning / Calibration. • Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. • Over-temperature limit / Door open alarm. • Preset 3 most commonly used temperature settings. • Digital LED display (0.1℃ resolution) using touch-sensitive keypads.

Constructional features • Completely safe anti-vibration design is helpful for cultivating yeast. • Space saving dimensions, lightweight, and compact design with

fully sealed gasket. • Stackable two high using the stacking kits. (optional)

• Without affecting the chamber temperature Sample inspection viewing is made easy due to the inner tempered glass door.

• Detachable shelves and rounded inner chamber corners allow for easy cleaning.

IB-E series complete inner chamber is a film type heater that is perfectly safe, it is vibration and noise free, and in addition it is most likely to not have mechanical troubles.

IB-01EIncluded Accessories •2wireshelves

Optional Accessories •Perforatedshelves see page 52 •Stackingkitsforstackablechambers

Incubators

42

Low Temperature Incubators

IL-21 / IL-21A

Incubators

Please visit .comFor further information on Jeio Tech´s Low Temperature Incubators products Informationisreadilyavailableonourwebsite.

43

Low Temperature Incubators - Forced Convection

Intensive low temperature incubating performance with compressor cooling system.IL series has an excellent HBP type compressor cooling system which is noiseless and reduces water-evaporation within the chamber.

IL-21Included Accessories •2wireshelvesforIL-11 •3wireshelvesforIL-21

Optional Accessories •Perforatedshelves see page 52

Incubators

Operating features • 0℃ to 60℃. • Microprocessor PID control / Auto-tuning / Calibration. • Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. • Over-temperature limit / Door open alarm. • Preset 3 most commonly used temperature settings. • 9 step temperature and up to 200 cycles of repetition

programmable for each profile. • Adjustable 3 step fan speed with defrosting time / period control. • Digital LED display (0.1℃ resolution) using touch-sensitive keypad. • RS-232 interface available.

Constructional features • Forced-air convection with an optimal cross flow type fan for

excellent variation. • Large size chamber with maximum of 244L. (8.6cu ft) • One electrical outlet with a safety cover which other electronic

instruments can be used in the chamber. • viewing is made easy due to the inner tempered glass door. • Detachable shelves and rounded inner chamber corners allow for

easy cleaning.


Model IL -11 IL -21Chamber Volume (L / cu ft) 150 / 5.32 244 / 8.6 Refrigerator (Hp) 1 / 8 HBP 1 / 6 HBP

TemperatureRange (℃ / ℉) 0 to 60 / +32 to 140Fluctuation 1) (±℃ / ℉) at 25℃ 0.1 / 0.18Variation 1) (±℃ / ℉) at 25℃ 0.5 / 0.9 0.4 / 0.72

Dimensions(W×D×H)

Interior (mm / inch)600×500×500 / 24.0×20.0×20.0

500×520×940 / 20.0×20.5×37.0

Exterior (mm / inch)735×742×1010 / 28.9×29.0×40.0

635×740×1630 / 25.0×29.0×64.0

Net weight (Kg / lbs) 100 / 220.0 135 / 297.0Electrical Requirements (230V) 50Hz, 4.5A 60Hz, 4.5A 50Hz, 6.4A 60Hz, 6.4ACat. No. AAH22042K AAH22041K AAH22052K AAH22051KElectrical Requirements (120V) 60Hz, 8.3A 60Hz, 10.6ACat. No. AAH22046U AAH22056U


44 Operating features

• +4℃ to 60℃. • Microprocessor PID control / Auto-tuning / Calibration. • Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. • Over-temperature limit / Door open alarm. • Preset 3 most commonly used temperature settings. • 9 step temperature and up to 200 cycles of repetition program-

mable for each profile. • Adjustable defrosting time / period control. • Digital LED display (0.1℃ resolution) using touch-sensitive keypad. • RS-232 interface available.

Constructional features • Air-jacketed type: independently exchanges heat outwardly with

inner gravity convection. • Large size chamber with a maximum volume of 254L. (9cu ft) • One electrical outlet with safety cover allows use of other electric

instruments in the chamber. • Viewing is made easy due to the inner tempered glass door. • Detachable shelves and rounded inner chamber corners allow for

easy cleaning.

IL-11A Included Accessories •2wireshelvesforIL-11A •3wireshelvesforIL-21A


Low Temperature Incubators - Air-jacket

Air-jacketed convection type incubators, prevent outside air disturbance in the inner chamber and has excellent temperature variation.IL-A series is perfectly safe from water-evaporation due to the use of an evaporator cooling system or blower, especially ideal for incubating tests that consist of easily drying samples outside.

Incubators


Model IL -11A IL -21AChamber Volume (L / cu ft) 162 / 5.7 254 / 9.0Refrigerator (Hp) 1 / 6 HBP 1 / 4 HBP

TemperatureRange (℃ / ℉) +4 to 60 / +39.2 to 140Fluctuation 1) (±℃ / ℉) at 25℃ 0.2 / 0.36Variation 1) (±℃ / ℉) at 25℃ 0.5 / 0.9

Dimensions(W×D×H)

Interior (mm / inch)600×540×500 / 24×21.3×20

500×540×940 / 20×21.3×37

Exterior (mm / inch)770×772×1060 / 30×30×42

670×760×1680 / 26×30×66

Net weight (Kg / lbs) 108 / 238.1 145 / 319.7Electrical Requirements (230V) 50Hz, 6.9A 60Hz, 6.9A 50Hz, 8.4A 60Hz, 8.4ACat. No. AAH22062K AAH22061K AAH22072K AAH22071KElectrical Requirements (120V) 60Hz, 10.2A 60Hz, 12.3ACat. No. AAH22063U AAH22073U


45

Low Temperature Personal Incubators

Compact, lightweight with reliable incubating performance for important testing.

Operating features • +10℃ to 40℃ at room temperature 25℃. • Microprocessor PID control / Auto-tuning / Calibration. • Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. • Over-temperature limit. • Preset 3 most commonly used temperature settings. • 9 step temperature and up to 200 cycles of repetition program-

mable for each profile. • Adjustable 3 step fan speed with defrosting time / period control. • Digital LED display (0.1℃ resolution) using touch-sensitive keypad. • RS-232 interface available.

Constructional features • Tempered inner glass door is equipped with all models! (14L / 48L)

• Maximum 2×1000mL Erlenmeyer flasks can be stored in the smallest chamber. (14L)

• Environment-friendly insulation material-EPDM used for safety and convenience. (ASTM-C534)

• Space-saving compact size on bench-top and easily stackable.

ILP series has a thermal electric module-Peltier cooling chip type which is very quiet, with no vibration, and small generation of heat to just fit a bench-top personal incubator!

ILP-02 stackable chambers Included Accessories •1wireshelfforILP-02 •2wireshelvesforILP-12


Incubators


Model ILP -02 ILP -12Chamber Volume (L / cu ft) 14 / 0.5 48 / 1.7

TemperatureRange (℃ / ℉) 10~40℃ (50~104℉) at ambient temperature 25℃

Fluctuation 1) (±℃ / ℉) at 25℃ 0.1 / 0.18Variation 1) (±℃ / ℉) at 25℃ 0.5 / 0.9 0.4 / 0.72

Dimensions(W×D×H)

Interior (mm / inch)315×200×230 / 12.4×7.9×9.1

334×334×430 / 13.1×13.1×17

Exterior (mm / inch)430×495×400 / 17×19.4×15.7

430×665×620 / 17×26.2×24.4

Net weight (Kg / lbs) 27.5 / 60.6 49 / 108Electrical Requirements (230V) 50Hz, 1.8A 60Hz, 1.8A 50Hz, 3.5A 60Hz, 3.5ACat. No. AAH24032K AAH24031K AAH24042K AAH24041KElectrical Requirements (120V) 60Hz, 3.4A 60Hz, 6.7ACat. No. AAH24033U AAH24043U


46

SI-600R Control Display

Incubated Shakers - Benchtop type

SI-600R Optional Accessories •Universal/Dedicatedplatforms,Rubbermats,Universalattachments see page 78-81 •Flaskclamps,Funnelclamps •Testtuberacks,Springwireracks •Microplateholders(three styles) •Labsticker

Incubators

Please visit .comFor further information on Jeio Tech´s Incubated Shaker products Informationisreadilyavailableonourwebsite.

47 Shaking features • Select between orbital or reciprocating action. • Speed range: 10 to 300 rpm. • Programmable shaking motion. - Run time: 10 sec to 999 hr 59 min 59 sec. - Forward & Backward, Pause: 10 sec to 59 min 59 sec. • Maximum orbit size: 40mm dia. (1.6˝ dia.)

Operating features • +5℃ above room temperature to 60℃ for SI-300, 600. • +15℃ to 60℃ for SI-300R, 600R. • Microprocessor PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over-temperature limit/ Door open alarm . • Digital LED display for temperature (0.1℃ resolution), speed, and

shaking motion • Preset 3 most commonly used temperature settings. • 9 step temperature and up to 200 cycles of repetition

programmable for each profile. • Adjustable 3 step fan speed . • RS-232 interface available.

Constructional features • Brushless DC motor for long maintenance-free use. • High-velocity fan ensures rapid thermal recovery and excellent

temperature variation. • Gas spring door and lid guards against sudden closures. • Acryl lid and inner lamp functions allow observation of flask

contents. • Uses CFC-free refrigerant. (for SI - 300R, 600R)

• Attached fluorescent lamp offered bright observation in a chamber.

Inside of SI series

Incubated Shakers - Benchtop type

Combines a benchtop incubator, refrigerator with dual-action in orbital and reciprocating shaker. Fulfills a variety of molecular biology, general incubation, and cell culture applications.

Digital incubating/ refrigerating benchtop shakers.

Incubators


Model SI-300 SI-300R SI-600 SI-600R

Temperature

Range (℃ / ℉) Amb. +5 to 60 (Amb. +9 to 140) for SI-300, 600

+15 to 60 (+59 to 140) for SI-300R, 600RFluctuation 1) at 37℃ (±℃ / ℉) 0.3 / 0.54 0.6 / 1.08 0.1 / 0.18 0.2 / 0.36Variation 1) at 37℃ (±℃ / ℉) 1.6 / 2.88 1.5 / 2.7 0.7 / 1.26 0.3 / 0.54

Refrigerator (Hp) -1 / 8 HBP (220V, 230V)

-1 / 8 HBP (220V, 230V)

1 / 6 HBP (100V, 120V) 1 / 6 HBP (100V, 120V)

Shaking system

Motion type Orbital or Reciprocating motion selectableSpeed range (RPM) 10 to 300

Timer Run time: 10 sec to 999 hr 59 min 59 secForward & Backward, Pause: 10 sec to 59 min 59 sec

Amplitude size (mm / inch, dia.) 20,30,40/0.8,1.2,1.6Available-Standard30/1.2Recip stroke length (mm / inch) 20,30,40/0.8,1.2,1.6Available-Standard30/1.2

Dimensions

Volume (L / cu ft) 53 / 1.9 83 / 2.9Platform (W×D) (mm / inch) 350×350 / 13.8×13.8 450×450 / 17.7×17.7Internal (W×D×H) (mm / inch) 410×410×320 / 16.1×16.1×12.6 510×510×320 / 20.1×20.1×12.6Overall (W×D×H) (mm / inch) 442×740×622 / 17.4×29.1×24.5 542×850×622 / 21.4×33.5×24.5Net weight (Kg / lbs) 74 / 163 85 / 187 91 / 200 102 / 225

Electrical Requirements (230V) 50 / 60Hz, 4.0A 60Hz, 5.5A 50Hz, 5.5A 50 / 60Hz, 4.0A 60Hz, 5.5A 50Hz, 5.5ACat. No. AAH23105K AAH23111K AAH23112K AAH23205K AAH23211K AAH23212KElectrical Requirements (120V) 50 / 60Hz, 7.5A 60Hz, 10.1A 50 / 60Hz, 7.5A 60Hz, 10.1ACat. No. AAH23106U AAH23113U AAH23206U AAH23213U


48

IS-971R Control Display

Incubated Shakers - Floor type

IS-971R Optional Accessories •Universal/Dedicatedplatforms,Rubbermats,Universalattachments see page 53-55 •Flaskclamps,Funnelclamps •Testtuberacks,Springwireracks •Microplateholders(three styles) •Labsticker

Incubators

Please visit .comFor further information on Jeio Tech´s Incubated Shaker products Informationisreadilyavailableonourwebsite.

Certification only for the IS-971/971R

49

Incubated Shakers - Floor type

Large and heavy capacity shaking with rapid heating / cooling performance.Advanced shaking for heavy workload and flask up to maximum 4×6L.Exclusive drive mechanism delivers years of dependable service.

Shaking features • Select between orbital or reciprocating action. • Speed range: 10 to 300 rpm. • Programmable shaking motion. - Run time: 10 sec to 999 hr 59 min 59 sec. - Forward & Backward, Pause: 10 sec to 59 min 59 sec. • Maximum orbit size: 70mm dia. (2.8˝ dia.)

Operating features • +5℃ above room temperature to 60℃ for IS-971

-15℃ above room temperature to 60℃ for IS-971RF +4℃ to 60℃ for IS-971R.

• Microprocessor PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over-temperature limit/ Door open alarm. • Digital LED display for temperature (0.1℃ resolution), speed, and

shaking motion. • Preset 3 most commonly used temperature settings. • 9 step temperature and up to 200 cycles of repetition

programmable for each profile. • Adjustable 3 step fan speed with defrosting time / period control. • RS-232 interface available.

Constructional features • Brushless DC motor for long maintenance-free use. • High-velocity fan ensures rapid thermal recovery and excellent

temperature variation. • Viewing window in top-opening provides a clear inner chamber

view, minimizing the need for opening the lid. (without IS - 971RF)

• Controlling 5 steps illumination lamp available. (Max. 12,000 lux IS-971RF)

• Gas spring door and lid guards against sudden closures. • Casters easily makes the unit mobile. • Door can be secured with a lock and key. • Uses CFC-free refrigerant. (for IS-971R, IS-971RF)

Inside of IS series

Incubators


Model IS-971 IS-971R IS-971RF

Temperature

Range (℃ / ℉) Amb. +5 to 60

/ Amb. +9 to 140 +4 to 60 / +40 to 140 Amb. -15 to 60 / Amb. -27 to 140

Fluctuation 1) at 37℃ (±℃ / ℉) 0.2 / 0.36Variation 1) at 37℃ (±℃ / ℉) 0.8 / 1.44

Refrigerator - 1 / 3 LBP (AC 120V) 1 / 3 LBP (AC 120V)

- 1 / 6 HBP (AC 230V) 1 / 4 HBP (AC 230V)

Shaking system

Motion type Orbital or Reciprocating motion selectableSpeed range (RPM) 10 to 300

Timer Run time : 10 sec to 999 hr 59 min 59 secForward & Backward, Pause: 10 sec to 59 min 59 sec

Amplitude size (mm / inch, dia.) 30,40,50,60,70/1.2,1.6,2.0,2.4,2.8Available-Standard30/1.2Recip stroke length (mm / inch) 30,40,50,60,70/1.2,1.6,2.0,2.4,2.8Available-Standard30/1.2

Dimensions

Volume (L / cu ft) 270 / 9.5Platform (W×D) (mm / inch) 755×481 / 29.7×18.9 Internal (W×D×H) (mm / inch) 894×634×480 / 35.2×25.0×18.9

Overall (W×D×H) (mm / inch)1,132×810×1,045 /

44.6×31.9×41.11,132×810×1,075 / 44.6×31.9×42.3

Net weight (Kg / lbs) 180.0 / 396.8 195.0 / 429.9 210.0 / 462.9Electrical Requirements (230V) 50 / 60Hz, 5.2A 60Hz, 7.3A 50Hz, 7.3A 60Hz, 9.3A 50Hz, 9.3ACat. No. AAH23306K AAH23321K AAH23322K AAH23351K AAH23352KElectrical Requirements (120V) 60Hz, 11.2A 60Hz, 13.8A 60Hz, 17.0ACat. No. AAH23336U AAH23346U AAH23356U

1) Technical data. (according to DIN 12880)※Certification only for the IS-971, IS-971R.

Certification only for the IS-971/971R

50

Incubated Shakers - Chamber type

Incubators

SIF-6000R Control Display

SIF-6000R Included Accessories •2wireshelves Optional Accessories •Universal/Dedicatedplatforms,Rubbermats,Universalattachments see page 52-55 •Flaskclamps,Funnelclamps •Testtuberacks,Springwireracks •Microplateholders(three styles) •Labsticker

Please visit .comFor further information on Jeio Tech´s Incubator products Informationisreadilyavailableonourwebsite.

51

Incubated Shakers - Chamber type

Space- saving provides various locations on/under your lab benches, or double-stacked on the FloorMulti-purpose laboratory incubated shakers accept flasks up to 2ea x 6 L (SIF-6000(R)). Two adjustable-height shelves provide added incubating or storage samples.

Incubators

Shaking features • Select between orbital or reciprocating action. • Speed range: 10 to 300 rpm. (Stackable Top :10 to 250) • Programmable shaking motion. - Run time: 10 sec to 999 hr 59 min 59 sec. - Forward & Backward, Pause: 10 sec to 59 min 59 sec. • Maximum orbit size : 19mm / 0.75″ dia (SIF 5000/R),

25mm / 1.0″ dia (SIF 6000/R)

Operating features • +5℃ above room temperature to 80℃ for SIF-5000/6000

-20℃ below room temperature to 80℃ for SIF-5000R/6000R • Microprocessor PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over-temperature limit / Door open alarm. • Digital LED display temperature (0.1℃ resolution), speed and shaking

motions. • Preset 3 most commonly used temperature settings. • 9 step temperature and up to 200 cycles of repetition programmable

for each profile. • Adjustable fan speed within 3 steps and defrosting time / period

control. • RS-232 interface available.

Constructional features • Brushless DC motor for long maintenance-free use. • Stackable 2 steps up to maximize spave efficiency. • High-velocity fan ensures rapid thermal recovery and excellent

temperature variation. • Viewing window in the front-opening provides a clear inner

chamber view, minimizing the need for opening the lid. • Observation lamp as standard. • Electrical socket inside chamber provides power to small equipments • Casters easily makes the unit mobile. • Door can be secured with a lock and key. • Uses CFC-free refrigerant. (For SIF-5000R/6000R)

Inside of SIF series


Model SIF-5000 SIF-5000R SIF-6000 SIF-6000R

Temperature 1)

Range (℃ / ℉) Amb.+5 to 80 [Amb.+41 to 176] for SIF -5000, 6000

Amb.-20 to 80 [Amb. -4 to 176] for SIF -5000R, 6000RFluctuation at 37℃ (±℃ / ℉) 0.1 / 0.18Variation at 37℃ (±℃ / ℉) 1.0 / 1.8Refrigerator (Hp) - 1/8Hp, HBP - 1/6Hp, HBP

Shaking system

Motion type Orbital or Reciprocating motion (Default : Orbital motion)

Speed range (RPM) 10 to 300 (Stackable Top :10 to 250)

Timer Run time(10sec ~ 999hr 59min 59sec) Pause, Forward, Backward(10sec ~ 59min 59sec)

Amplitude size (mm / inch, dia.) 13,19/0.5,0.75Available-Standard19/0.75Recip stroke length (mm / inch) 19,25/0.75,1.0Available-Standard25/1.0

Dimensions

Volume (L / cu ft) 80 / 2.8 150 / 5.3Platform (W×D, mm / inch) 350×350 / 13.8x13.8 450×450 / 17.7×17.7Interior (W×D×H, mm / inch) 440×440×418 / 17.3×17.3×16.5 540×540×518 / 21.3×21.3×20.4 Exterior (W×D×H, mm / inch) 570×815×900 / 22.4×32.1×35.4 670×895×980 / 26.4×35.2×38.6Shelves (Standard / Max) 2 / 8 2 / 11Net weight (kg / Ibs) 120 / 264.6 130 / 286.6 140 / 308.6 150 / 330.7

Electrical Requirements (230V) 50 / 60Hz, 5.4A 60Hz, 7.2A 50Hz, 7.2A 50 / 60Hz, 5.4A 60Hz, 7.3A 50Hz, 7.3ACat. No. AAH27025K AAH27121K AAH27122K AAH27015K AAH27111K AAH27112KElectrical Requirements (120V) 60Hz, 11.1A 60Hz, 12.9A 60Hz, 11.2A 60Hz, 13.1ACat. No. AAH27026U AAH27123U AAH27016U AAH27113U

※ Permissible ambient Condition : Temperature 5℃ to 40℃,Maximumrelativehumidity80%※ All specifications are under ambient temperature 20℃(with refrigerator) / 25℃(without refrigerator), no load1) Technical data. (according to DIN 12880)

52

Accessories & Options for IncubatorsIncubators

Universal Platforms Wire Shelves Perforated Shelves

Wire Shelves Stainless steel and electro polished shelf system is removed easily without using tools for easy cleaning.

Cat. No. ModelsDescription

Included Maximum W×L (mm / inch)

EDA8136 IB-05G 2 8 366×316 / 14.4×12.4EDA8135 IB-15G 2 12 446×366 / 17.6×14.4EDA8137 IB-25G 2 12 576×419 / 22.7×16.5EDA8136 IB-01E 2 11 366×316 / 14.4×12.4EDA8220 IB-11E 2 14 466×490 / 17.6×19.3EDA8219 IB-21E 2 15 566×466 / 22.3×17.6EDA8219 IL-11 / 11A 2 12 566×466 / 22.3×17.6EDA8220 IL-21 / 21A 3 26 466×490 / 17.6×19.3EDA8223 ILP-02 1 6 195×310 / 7.7×12.2EDA8221 ILP-12 2 11 305×299 / 12.0×11.8

AAA31521 SIF-5000 / R 2 8 416×406 / 16.4×16.0AAA31522 SIF-6000 / R 2 11 516×506 / 20.3×19.9

Perforated Shelves Stainless steel shelf system is removed easily without using tools for easy cleaning.

Cat. No. ModelsDescription

Maximum W×L (mm / inch)

AAA12531 IB-05G 8 366×316 / 14.4×12.4AAA12532 IB-15G 12 446×366 / 17.6×14.4AAA12535 IB-25G 12 576×419 / 22.7×16.5AAA12531 IB-01E 11 366×316 / 14.4×12.4AAA22522 IB-11E 14 466×490 / 17.6×19.3AAA22521 IB-21E 15 566×466 / 22.3×17.6AAA22521 IL-11 / 11A 12 566×466 / 22.3×17.6AAA22522 IL-21 / 21A 26 466×490 / 17.6×19.3AAA24501 ILP-02 6 195×310 / 7.7×12.2AAA24502 ILP-12 11 305×299 / 12.0×11.8

Stacking Kits Stackable 2 steps up to maximize space efficiency with exclusive stacking kits. (Only for IB-G, IB-E series)

Cat. No. Models DescriptionAAA21521 IB-05G Stacking kits for stackable chambersAAA21522 IB-15G Stacking kits for stackable chambersAAA21523 IB-25G Stacking kits for stackable chambersAAA26501 IB-01E Stacking kits for stackable chambersAAA26502 IB-11E Stacking kits for stackable chambersAAA26503 IB-21E Stacking kits for stackable chambers

53


Flask Clamps Plastic Clamps Funnel Clamps

Universal platforms & Flask clamps, Funnel clamps The universal platforms provide flexibility for mixing different sized assortment of test tubes and glassware on a single platform. Available in

different size assortment of clamps for Erlenmeyer flasks and Separatory funnels.

Description SI-300(R) SI-600(R) SI-971(R/F) SIF-5000(R) SIF-6000(R)

Universal platform Cat. No. AAA23501-V1 AAA23502-V1 AAA23503-V1 AAA31501-V1 AAA31502-V1Max. mountable fl ask clamps *

Cat. No. Erlenmeyer fl ask sizeSteel Plastic AAA23550 AAA30570 for 50mL 28 45 99 36 55AAA23551 AAA30571 for 100mL 24 36 74 28 44AAA23552 AAA30573 for 250mL 13 18 39 13 24AAA23556 AAA30574 for 300mL 13 18 39 13 24AAA23553 AAA30575 for 500mL 9 13 25 10 16AAA23554 AAA30576 for 1L 4 7 14 5 8AAA23555 AAA30577 for 2L 2 5 9 4 5AAA23557 - for 2.8L 1 2 6 2 4AAA23558 - for 4L - - 4 - 2AAA23559 - for 6L - - 4 - 2

Max. mountable funnel clamps *Cat. No. Separating funnel sizeAAA23562 for 250mL 4 6 11 4 6AAA23563 for 500mL 2 3 9 2 3AAA23564 for 1L - 2 5 - 2AAA23565 for 2L - - 4 - -

Dedicated platforms If using a single flask size only, the dedicated platforms provide maximum capacity, and come with clamps installed.

Provided standard clamp size are 250mL and 500mL, but possibly provide the other size of clamps also.

Cat. No. DescriptionAAA23611 AnuniversalplatformforSI-300serieswith250mLflaskclamps13eaAAA23612 AnuniversalplatformforSI-300serieswith500mLflaskclamps9eaAAA23621 AnuniversalplatformforSI-600serieswith250mLflaskclamps18eaAAA23622 AnuniversalplatformforSI-600serieswith500mLflaskclamps13eaAAA23631 AnuniversalplatformforIS-971serieswith250mLflaskclamps39eaAAA23632 AnuniversalplatformforIS-971serieswith500mLflaskclamps25eaAAA31551 AnuniversalplatformforSIF-5000serieswith250mLflaskclamps13eaAAA31552 AnuniversalplatformforSIF-5000serieswith500mLflaskclamps10eaAAA31561 AnuniversalplatformforSIF-6000serieswith250mLflaskclamps24eaAAA31562 AnuniversalplatformforSIF-6000serieswith500mLflaskclamps16ea

*Adedicatedplatformissoldwithsettingeachmax.mountableamountofflaskclampson.

54


Rubber Mats Universal attachments Spring Wire Racks

Spring wire racks Ideal for holding a wide variety of tubes, flasks, and other glassware. All component are made of stainless steel.

Description SI-300(R) SI-600(R) SI-971(R/F) SIF-5000(R) SIF-6000(R)

Spring wire racks Cat. No. AAA23521 AAA23522 AAA23523 AAA31521 AAA31522

Max. inserting flask clampsErlenmeyer flask size

for 50mL 16 25 40 16 25for 100mL 9 16 28 9 16for 250ml 4 9 15 4 9for 300mL 4 9 15 4 9for 500ml 4 5 10 4 5

for 1L 2 4 8 2 4for 2L 1 2 4 1 2

for 2.8L 1 2 4 1 2

Rubber mats The non-skid rubber mats are designed for low-speed applications, allow for quick addition or removal of flasks, plates or tubes.

Models SI-300(R) SI-600(R) SI-971(R/F) SIF-5000(R) SIF-6000(R)

Cat. No. AAA23531 AAA23532 AAA23533 AAA31531 AAA31532

Universal attachments (Utility carriers) Several adjustable clamping bars to quickly secure a variety of glassware or tubes on non-skid rubber mat. Suitable for different sizes of flat

bottomed flasks.

Models SI-300(R) SI-600(R) SI-971(R/F) SIF-5000(R) SIF-6000(R)

Cat. No. AAA23531 AAA23532 AAA23533 AAA31531 AAA31532

Please visit .comFor further information on Jeio Tech´s Incubators products Informationisreadilyavailableonourwebsite.

55


Test tube racks Highly durable stainless steel racks with adjustable angle and tube height support. Simply release and mount racks. Requires an universal

platform which are sold separately.

Cat. No. Description Mountable capacity of racks *AAA23581 for 86 test tubes 8mm dia. (0.3˝)







* No declination※ We can manufacture other size of test tube racks to meet your specific requirements. Contact us for details.

Microplate holders Available in three styles. A Tower type holder, two Flat types (small and large) and a Single type. The large flat holders will hold 4 standard or deep

well plates. The small flat holders will hold 3 standard or deep well plates. The single holders will hold only 1 standard or deep well plate.

Microplate holders Tower type Flat-A type (large) Flat-B type (small) Single typeCat. No. AAA23651 AAA23652 AAA23653 AAA23654

Max. mountable holdersSI-300(R) 5 - 2 7SI-600(R) 7 2 2 12

IS-971(R / F) 16 3 5 25SIF-5000 (R) 6 - 2 8SIF-6000 (R) 10 2 3 15

*Microplateholdersneedtobemountedonanuniversalplatformwhichissoldseparately.

Lab Sticker Alternative to flask clamps for securing vessels to a shaker platform the ideal way to secure containers such as bottles and dishes on the universal

platform is that cannot be held with conventional flask clamps. The lab sticker can be re-generated to a new condition by washing it with mild detergent and water. It cannot be used in water baths. For safe operation, suggest increasing the RPM gradually.

Description Lab StickerLab Sticker Cat. No. AAA30551

Size (mm / inch, W×D×H) 200×200×5 / 7.9×7.9×0.2

*LabStickerneedtobemountedonanuniversalplatformwhichissoldseparately.

SI-300(R) SI-600(R) IS-971(R/ F) SIF -5000 Series SIF-6000 Series

2EA 4EA 6EA 2 EA 4 EA

Test Tube Racks Microplate Holders Lab Sticker

Forced Convection Ovens.Natural Convection Ovens.Vacuum Ovens.

Ovens

Selection GuideForced Convection Ovens (Mechanical)



ChamberVolume

(L /cu ft)

TemperatureFluctuationat 100℃ [±℃/℉]


at 100℃ [±℃/℉]Page

General type

OF -02G Amb. +10 to 250 / Amb. +18 to 482

60 / 2.1 0.5 / 0.9 1.0 / 1.858OF -12G 102 / 3.6 0.6 / 1.08 1.3 / 2.3

OF -22G 151 / 5.3 0.8 / 1.44 1.7 / 3.1OF -300G

Amb. +10 to 200/ Amb.+18 to 392

314 / 11.0 0.2 / 0.36 0.9 / 1.6

60

OF -450G 450 / 15.9 0.1 / 0.18 0.7 / 1.3OF -750G 760 / 26.8 0.2 / 0.36 1.5 / 2.7OF -300H

Amb. +10 to 300/ Amb.+18 to 572

314 / 11.00.2 / 0.36

0.9 / 1.6OF -450H 450 / 15.9 0.8 / 1.4OF -750H 760 / 26.8 1.9 / 3.4

Economictype

OF -01EAmb. +10 to 220 / Amb. +18 to 428

52 / 1.8 0.8 / 1.44

3.3 / 5.9462OF -11E 100 / 3.5 3.3 / 5.94

OF -21E 150 / 5.3 2.3 / 4.14

Natural Convection Ovens (Gravity)



ChamberVolume

(L /cu ft)

TemperatureFluctuationat 100℃ [±℃/℉]


at 100℃ [±℃/℉]Page

General type

ON -02G Amb. +15 to 250 / Amb. +27 to 482

52 / 1.8 0.3 / 0.54

5.9 / 10.6263ON -12G 91 / 3.2 7.5 / 13.5

ON -22G 135 / 4.8 6.9 / 12.42

Economictype

ON -01E Amb. +15 to 220 / Amb. +27 to 428

52 / 1.8 0.3 / 0.54 6.5 / 11.764ON -11E 100 / 3.5 0.4 / 0.72 4.1 / 7.38

ON -21E 150 / 5.3 0.5 / 0.9 7.3 / 13.14

Vacuum Ovens



ChamberVolume

(L /cu ft)

TemperatureFluctuationat 100℃[±℃/℉]


at 100℃[±℃/℉]Page

VacuumOV -11 Amb. +5 to 250

/ Amb. +9 to 48228 / 1.0 0.1 / 0.18

3.7 / 6.66 66OV -12 65 / 2.3 0.3 / 0.54


for Convection Ovens 65for Vacuum Ovens 67

Safety functions1) Self-protecting cut-off function and visual signals : - Over temperature safety function: shuts the

power that is being supplied to the heater and then the controller sequentially.

- 2 separate over-current fuses. (without large type)

2) Timer mode useful for delaying the start of a test or for stopping a test that has been running for a certain time :

- Integrated time setting: Delay ON/OFF [from 1 min 99hr 59 min]

- Power interruption setting: After a power interruption select automatic run or manual run.

3) Door-open warning alarm (excludes OV series) : - Intermittent audible tone and visual LED

warning alarms. - After 5 minutes of the door being open the

heater and fan will automatically stop to protect the user.

Optimum control performance1) Professional electronic and program control : - Microprocessor PID temperature control with

very simple calibration and auto-tuning feature. - Conveniently preset 3 most commonly used

temperature settings. - Switch from Celsius to Fahrenheit. (℃ or ℉)

2) HMI (Human Machine Interface) control display network system :

- Similar key arrangements to the temperature humidity chamber, bath, circulator, and shaker.

- User-friendly controls, splash proof / easy to clean keypad and clear LED display.

- Quick keypad lock key prevents accidental resetting of testing parameters.

Ideal construction1) High quality #304 grade stainless steel inner

chamber and dirt repellent powder coated exterior surface. (except for OV series)

2) Gasket minimizes heat loss and tightly seals the chamber door.

3) Fully insulated oven chamber prevents heat from escaping to the exterior surface.

4) Adjustable electro polished stainless steel shelving provides air flow around samples for unifor-med tempering and allow for easy cleaning.

Technical Benefits


Forced, Nature convection ovens & VacuumOF-Series ON-Series OV-Series

General Aging and Curing •Agricultural Genetic • •Annealing • • •Asphalt Testing • •Conditioning • •

Contamination-Free storage of semiconductors and other sensitiveelectronic components

•

Desiccating •Digestion of Proteins and Starches •Drying of Plant Tissue •Drug Metabolism • •Electronic Burn-in • •Epoxy and Plastic Curing • •Fine Chemical Precipitation •General Baking • •General Heating • •Glassware Drying • •Ideal for General Drying •Life and Exposure Studies • •Ordnance Material Testing • •Out-gassing Solids and Liquids •Paper Drying • •Plating •Precise Moisture Determination • •Preheating • •Rubber Drying • •Serum Protein Analysis • •Silicon Wafer Drying •Stability and QC/ Batch Testing • •Sterilization • •Suspended Solids Evaluation • •Textile Drying • •Vacuum Embedding •Volatile Resins and Polymers Testing •Vulcanization Studies • •

58

Forced Convection OvensOvens

OF-22G with optional viewing window

Please visit .comFor further information on Jeio Tech´s Forced Convection Oven products Information is readily available on our website.

59

Forced Convection Ovens

Operating features • From +10℃ above room temperature to 250℃. • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF. • Over temperature limit protection / door open alarm. • Conveniently preset 3 most commonly used temperature settings. • LED display (1℃ resolution) with a touch keypad. • RS-232 interface available.

Constructional features • Forced-air convection, noiseless sirocco fan which ensures proper

circulation and strong dispersion of air.

• Sample viewing window with threefold tempered glass window. (optional)

• An adjustable fan speed with an analog dial to prevent powdered samples from blowing away. (optional)

• Dual walled door opens 180 degrees and features a double latch door handle.

• Rounded inner chamber corners for easy cleaning and uniformed air flow.

• Corrosion-resistance incoloy sheath heated and stainless steel interior.

• Adjustable 2 top ventilation vents to control the inner air vapor circulation. (dia 38mm / 1.5inches)

OF-G series, quiet and with a strong air-flow for a high air exchange rate and short rise time that guarantees intensive drying performance, especially for material with high moisture content.

Intensive drying performance with a powerful air-flow.

Specifi cations & Ordering Informations

Model OF -02G OF -12G OF -22GChamber volume (L / cu ft) 60 / 2.1 102 / 3.6 151 / 5.3


Dimension(W×D×H)

Interior (mm / inch)400×360×420/ 15.7×14.2×16.5

480×410×520/ 18.9×16.1×20.5

550×460×600/ 22×18×23.6

Exterior (mm / inch)577×642×760 / 22.7×25.3×30

657×692×870 / 25.9×27.2×34.3

727×742×974/ 28.7×29.2×38.3

Net weight (Kg / lbs) 53 / 117 63 / 139 72.5 / 160Electrical Requirements (230V, 50 / 60Hz) 4.4A 6.1A 7.4ACat. No. AAH12155K AAH12165K AAH12175KElectrical Requirements (120V, 50 / 60Hz)) 6.8A 8.4A 10.1ACat. No. AAH12155U AAH12166U AAH12176U


Convection pattern of OF-G series Included Accessories • 2 wire shelves Optional Accessories • Tempered viewing window

see page 65 • Fan speed adjuster • Perforated shelves

Ovens

60

OF-G / H series with optional viewing window


OF-G / H (large) Display

Please visit .comFor further information on Jeio Tech´s Forced Convection Oven productsInformation is readily available on our website.

61


The large high-performance oven types are designed for a wide variety of applications, even for intensive use. Also, the precise temperature control and powerful quickly heated air with evenly distributed air-flow, makes it possible for receiving immediate test results.

Available efficient large volume general purpose type ovens up to 760 liters and with fast drying performance. (200℃ or 300℃)

Convection pattern of OF-G / H series Included Accessories • 2 wire shelves (OF-300G / H) • 3 wire shelves (OF-450G / H, 750G / H) Optional Accessories • Tempered viewing window

see page 65 • Perforated shelves • Digital recorders

Operating features • 10℃ above room temperature to 200℃ (OF-G series) 10℃ above room temperature to 300℃ (OF-H series)

• Microprocess PID control/ Auto-tuning/ Calibration • Digital timer: 1 min ~ 99 hr 59 min, delayed ON/ OFF • Over-temperature limiter/ Door opening alarm • 3 different temperature values memorable • Selective Auto Run function after power recovery. • Digital LED display (1℃ resolution) using touch-sensitive keypads • RS-232 interface available

Constructional features • Forced-air convection with two noiseless sirocco fan which ensures

good mixing and strong dispersion • Optimized sample monitoring with threefold tempered safety

glass window (optional)

• Rounded inner chamber corners for easy cleaning and better air-flowing

• Corrosion-resistant incoloy sheath heating element and stainless steel interior

• Adjustable 2 side ventilation slides to control inner air, vapor circulation (dia 38mm/1.5″)

• 5 steps fan speed adjuster can be control inner circulation speed. • Casters easily make the unit mobile • Large size chamber with a maximum volume of 760L (28.8cu ft). • Recorder (optional) - 6-point dot type recorder with a digital display. - Thermal line type recorder


Model OF-300G OF-450G OF-750G OF-300H OF-450H OF-750HChamber volume (L / cu ft) 314 / 11.0 450 / 15.9 760 / 26.8 314 / 11.0 450 / 15.9 760 / 26.8

TemperatureRange (℃ / ℉) Amb. +10 to 200 / Amb.+18 to 392 Amb. +10 to 300 / Amb.+18 to 572Fluctuation 1) (±℃ / ℉) at 100℃ 0.2 / 0.36 0.1 / 0.18 0.2 / 0.36 0.2 / 0.36 0.2 / 0.36 0.2 / 0.36Variation 1) (±℃ / ℉) at 100℃ 0.9 / 1.6 0.7 / 1.3 1.5 / 2.7 0.9 / 1.6 0.8 / 1.4 1.9 / 3.4

Dimension(W×D×H)

Interior (mm / inch)645×750×650 / 25.4×29.5×25.6

645×750×930 / 25.4×29.5×36.6

745×850×1200 / 29.3×33.5×47.2

645×750×650 / 25.4×29.5×25.6

645×750×930/ 25.4×29.5×36.6

745×850×1200 / 29.3×33.5×47.2

Exterior (mm / inch)835×1020×1225 / 32.9×40.2×48.2

835×1020×1505 / 32.9×40.2×59.3

955×1140×1775 / 37.6×44.9×69.9

835×1020×1225 / 32.9×40.2×48.2

835×1020×1505 / 32.9×40.2×59.3

955×1140×1775 / 37.6×44.9×69.9

Net weight (Kg / lbs) 175 / 386 210 / 463 280 / 617 210 / 463 250 / 551 335 / 739Electrical Requirements (230V, 1 ph, 50 / 60 Hz) 12.7A

Cat. No.Solid door type AAH18015 - - - - -Viewing window door type AAH18115 - - - - -

Electrical Requirements (230V, 3 ph, 50 / 60 Hz) 10.0A 13.8A 10.0A 13.8A 16.8A

Cat. No.Solid door type - AAH180213 AAH180313 AAH190113 AAH190213 AAH190313Viewing window door type - AAH181213 AAH181313 AAH191113 AAH191213 AAH191313

Electrical Requirements (380V, 3 ph, 50 / 60 Hz) 6.5A 8.8A 6.5A 8.8A 10.6A

Cat. No.Solid door type - AAH180214 AAH180314 AAH190114 AAH190214 AAH190314Viewing window door type - AAH181214 AAH181314 AAH191114 AAH191214 AAH191314


62

Forced Convection Ovens - Economic type

Full feature performance for general purpose lab ovens.OF-E series feature a fast drying with vertical air-flow.

Operating features • From +10℃ above room temperature to 220℃. • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over-temperature limit protection / Door opening alarm. • Conveniently preset 3 most commonly used temperature settings

without auto-tuning. • Digital LED display (1℃ resolution) with touch keypads.

Constructional features • Circular fan assisted forced-air convection provides a high unifor-

med drying performance.

• Moderately sized, spacious, and an easy to grip circular door handle.

• Corrosion-resistant incoloy sheath heater and stainless steel chamber.

• Two circular adjustable top slide vents helps to control inner air vapor circulation. (38mm / 1.5˝ in dia.)

OF-11E Included Accessories • 2 wire shelves Optional Accessories • Perforated shelves

see page 65

Ovens


Model OF-01E OF-11E OF-21EChamber volume (L / cu ft) 52 / 1.8 100 / 3.5 150 / 5.3

TemperatureRange (℃ / ℉) Amb. +10 to 220 / Amb. +18 to 428Fluctuation 1) (±℃ / ℉) at 100℃ 0.4 / 0.72Variation 1) (±℃ / ℉) at 100℃ 3.3 / 5.94 3.3 / 5.94 2.3 / 4.14

Dimension(W×D×H)

Interior (mm / inch)375×370×370 14.8×14.6×14.6

455×430×51018×17×20

585×460×555 23×18.1×21.9

Exterior (mm / inch)530×535×737 20.9×21.1×29

610×595×877 24×23.4×34.5

740×625×922 29.1×24.6×36.3

Net weight (Kg / lbs) 36 / 79.4 47 / 103.6 59 / 130Electrical Requirements (230V, 50 / 60 Hz) 4.3A 6.0A 7.4ACat. No. AAH14012K AAH14022K AAH14032KElectrical Requirements (120V, 50 / 60 Hz) 6.8A 8.4A 10.1ACat. No. AAH14016U AAH14026U AAH14036U


63


Model ON-02G ON-12G ON-22GChamber volume (L / cu ft) 52 / 1.8 91 / 3.2 135 / 4.8

TemperatureRange (℃ / ℉) Amb. +15 to 250 / Amb. +27 to 482Fluctuation 1) (±℃ / ℉) at 100℃ 0.3 / 0.54Variation 1) (±℃ / ℉) at 100℃ 5.9 / 10.62 7.5 / 13.5 6.9 / 12.42

Dimension(W×D×H)

Interior (mm / inch)400×360×365/ 15.7×14.2×14.4

480×410×465/ 18.9×16.1×18.3

610×460×485/ 24×18×19

Exterior (mm / inch)577×542×760/ 22.7×21.3×30

657×592×870/ 25.9×23.3×34.3

785×642×897/ 30.9×25.3×35.3

Net weight (Kg / lbs) 49 / 108 59 / 130 68 / 150Electrical Requirements (230V, 50 / 60 Hz) 4.3A 6.0A 7.4ACat. No. AAH11135K AAH11145K AAH11155KElectrical Requirements (120V, 50 / 60 Hz) 6.7A 8.3A 10.0ACat. No. AAH11136U AAH11146U AAH11156U


Natural Convection Ovens

Operating features • From +15℃ above room temperature to 250℃. • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over temperature limit protection / Door opening alarm. • Conveniently preset 3 most commonly used temperature settings

without auto-tuning. • Digital LED display (1℃ resolution) with touch keypads.

Constructional features • Gravity-flow convection with vertical airflow for uniform sample

heating.

• Threefold tempered glass viewing window allows for easy moni-toring of samples. (optional)

• Fully insulated dual-wall door opens 180 degrees & featuring a pull down door handle.

• Rounded inner chamber corners for easy cleaning and better air-flowing.

• Corrosion-resistant incoloy sheath heater and stainless steel interior.


ON-G series is used for all sterilization and drying tasks that do not require high drying rates or special time requirements, ideal for drying applications requiring a gentle airflow.

Ideal for high temperature storage with user-friendly design

ON-22G with optional viewing window Included Accessories • 2 wire shelves Optional Accessories • Tempered viewing windows

see page 65 • Perforated shelves

Ovens

64

Natural Convection Ovens - Economic type

Full features performance for general purpose lab ovens.ON-E series is a economical warm storage up to 220℃.

Operating features • From +15℃ above room temperature to 220℃. • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over temperature limit protection / Door opening alarm. • Conveniently preset 3 most commonly used temperature settings

without auto-tuning • Digital LED display (1℃ resolution) with touch keypads.

Constructional features • Gravity-flow convection generates a vertical airflow of heat for a

uniformed heating of samples.

• Moderately sized, an easy to clean spacious chamber, and an easy to grip circular door handle.

• Corrosion-resistant incoloy sheath heater and stainless steel chamber.


ON-11E Included Accessories • 2 wire shelves Optional Accessories • Perforated shelves

see page 65

Ovens


Model ON-01E ON-11E ON-21EChamber volume (L / cu ft) 52 / 1.8 100 / 3.5 150 / 5.3


Dimension(W×D×H)

Interior (mm / inch)375×370×370 / 14.8×14.6×14.6

455×430×510 / 18×17×20

585×460×555 / 23×18.1×21.9

Exterior (mm / inch)530×535×737 / 20.9×21.1×29

610×595×877 / 24×23.4×34.5

740×625×922 / 29.1×24.6×36.3

Net weight (Kg / lbs) 34 / 75 46 / 101.4 59 / 130Electrical Requirements (230V, 50 / 60 Hz) 4.3A 6.0A 7.4ACat. No. AAH15015K AAH15025K AAH15035KElectrical Requirements (120V, 50 / 60 Hz) 6.7A 8.3A 10.0ACat. No. AAH15016U AAH15026U AAH15036U


65

Wire Shelves Stainless steel and electro polished shelf system is removed easily without using tools for easy cleaning.

ModelsDescription

Cat. No.Included Maximum W×L (mm / inch)

OF-02G 2 8 366×316 / 14.4×12.4 EDA8136OF-12G 2 12 446×366 / 17.6×14.4 EDA8135OF-22G 2 14 516×416 / 20.3×16.4 EDA8134OF / ON-01E 2 10 366×316 / 14.4×12.4 EDA8136OF / ON-11E 2 14 446×366 / 17.6×14.4 EDA8135OF / ON-21E 2 15 576×419 / 22.7×16.5 EDA8137OF-300G / H 2 17 708×608 / 27.9×23.9 RTD1196OF-450G / H 3 26 708×608 / 27.9×23.9 RTD1196OF-750G / H 3 35 708×808 / 27.9×31.8 RTD1197ON-02G 2 8 366×316 / 14.4×12.4 EDA8136ON-12G 2 12 446×366 / 17.6×14.4 EDA8135ON-22G 2 12 576×419 / 22.7×16.5 EDA8137

Perforated Shelves Stainless steel shelf system is removed easily without using tools for easy cleaning.

ModelsDescription

Cat. No.Maximum W×L (mm / inch)

OF-02G 8 366×316 / 14.4×12.4 AAA12531OF-12G 12 446×366 / 17.6×14.4 AAA12532OF-22G 14 516×416 / 20.3×16.4 AAA12533OF / ON-01E 10 365×310 / 14.4×12.4 AAA12531OF / ON-11E 14 445×360 / 17.6×14.4 AAA12532OF / ON-21E 15 575×410 / 22.7×16.5 AAA12535OF-300G / H 17 708×608 / 27.9×23.9 AAA80604-2OF-450G / H 26 708×608 / 27.9×23.9 AAA80604-2OF-750G / H 35 708×808 / 27.9×31.8 AAA80604-3ON-02G 8 366×316 / 14.4×12.4 AAA12531ON-12G 12 446×366 / 17.6×14.4 AAA12532ON-22G 12 576×419 / 22.7×16.5 AAA12535

Recorders Easy recognizable digital recorders for efficient temperature indicating.

Models Description Cat. No.

OF-300, 450, 750 G/HRecorder (6 Point) AAA8T500Recorder (Thermal Line type) AAAE1503

Tempered Viewing Windows Optimized sample monitoring with threefold, tempered safety glass window. (Only for OF-G, ON-G series)

ModelsDescription

Cat. No.Thickness, W×L (mm / inch)

OF / ON-02G 5, 150×280 / 0.2, 5.9×11 AAA12611OF / ON-12G, 22G 5, 150×380 / 0.2, 5.9×15.0 AAA12612

Fan-Speed Adjuster Adjustable inner air circulation speed, which protects spreading out powder sample.

(Only for OF-G series)


F - 02G, 12G, 22G Analog dial control AAA12701

※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific requirements. Contact us for details.

Wire Shelves

Perforated Shelves

Tempered Viewing Windows

Fan Speed Adjuster

Accessories & Options for OvensOvens

66

Vacuum Ovens

Optimal vacuum oven with a wide temperature range for various test applications.OV series ovens are ideal for separating solvents from solutions without using high temperature drying and for drying solvents with high boiling points in a vacuum ovens reduces the boiling point of the solvent to make drying easy.

Operating features • From +5℃ above room temperature to 250℃. • Vacuum range: 0 to 0.1MPa. (analog vacuum gauge) • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over temperature limit protection / Door opening alarm. • Conveniently preset 3 most commonly used temperature settings

without auto-tuning. • Digital LED display (1℃ resolution) with touch keypads. • RS-232 interface available.

Constructional features • Separate vacuum and vent ports: the narrow vent line controls the

vacuum rate and inert. (wider the vacuum line, the faster the vacuum is produced.)

• Tight gasket seal and push-button latch.

• Block type heater distributes heat evenly from the chamber exterior to the anodized.

• Heat tempered spring load glass door gives a tight vacuum seal and convenient for continuous monitoring of samples.

• Moderately sized oven with user-friendly all-in-one control panel.

• Upon request available with Viton (fluorine rubber) door gasket.(optional)

OV-11 Included Accessories • Plate shelve, 3.0mm (0.12˝) :

2 for OV-11 / 3 for OV-12. Optional Accessorie • Safety cover.

see page 67 • Viton gasket. • Vacuum pumps and Oil mist trap. • Cold trap baths and U-type glass trap.

Ovens


Model OV-11 OV-12Chamber volume (L / cu ft) 28 / 1.0 65 / 2.3Vacuum range 0~0.1MPa, AnalogNozzle size (mm / inch) Vacuum Ø10 / 0.4, Vent Ø10 / 0.4

TemperatureRange (℃ / ℉) Amb. +5 to 250 / Amb. +9 to 482Fluctuation 1) (±℃ / ℉) at 100℃ 0.1 / 0.18 0.3 / 0.54Variation 1) (±℃ / ℉) at 100℃ 3.7 / 6.66

Dimension(W×D×H)

Interior (mm / inch)302×305×302 / 11.9×12×11.9

402×405×402/ 15.8×15.9×15.8

Exterior (mm / inch)680×453×495 / 26.8×17.8×19.5

780×557×595/ 15.8×15.9×15.8

Net weight (Kg / lbs) 63 / 139 103 / 227Electrical Requirements (120V, 50 / 60 Hz) 5.3A 6.1ACat. No. AAH13115K AAH13125KElectrical Requirements (230V, 50 / 60 Hz) 10A 11.7ACat. No. AAH13116U AAH13126U


67

Safety Covers

Viton Gaskets

Vacuum Pumps

Cold Trap Baths

Accessories & Options for Vacuum OvensOvens

(Organization chart for use of Vacuum oven with Pump and Cold trap bath)

Safety Covers Netted steel frame and polycarbonate sheet covering prevents the glass door from exploding.

Models Description Cat. No.OV-11 Safety Cover AAA13603OV-12 Safety Cover AAA13604

Gaskets Upon request available with Viton (fluorine rubber) door gasket.


OV-11Silicone Gasket FAA5146Viton (Fluorine rubber) Gasket FAA5187

OV-12Silicone Gasket FAA5147Viton (Fluorine rubber) Gasket FAA5188

Related products for Vacuum Ovens

Vacuum Pumps Rotary vacuum pump equipped with direct connect oil seal prevents air reflux, essentially

used with vacuum ovens to achieve a higher level of vacuum pressure. Oil mist trap, an optional feature, prevents oil in-flow (refer to page. 69 for more specific information)

Models Electrical Requirements Cat. No.

MVP-6230V, 50 / 60Hz BEH73005K120V, 60Hz BEH73006K

Related accessory Oil Mist Trap BEH73501

Cold Trap Baths Preventing vacuum pumps in a condition of vacuuming as a cold trap to prevent vapors from

a vacuum pump Included 2 U-type glass traps. (refer to page. 18 for more specific information)


CTB-10230V, 60Hz AAH62011K230V, 50Hz AAH62012K

Related accessory U-type Glass Trap AAA62501

※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific requirements. Contact us.

Electrical Aspirator Pumps.Rotary Vacuum Pumps.

Pumps

Electrical Aspirator Pumps

VE-11 with optional vacuum gauge / regulator

Portable dual-channel, water-jet aspirator pumps.

VE-11 creates a vacuum using an aspirator pump that is dependent on the vapor pressure of water, a function of temperature. Ideal for rotary vacuum evaporators, decompressing distillatories, vacuum dryers, and vacuum filtering units.

Features • Built-in circulating pump and water tank makes this unit portable

and eliminates water waste.

• Circulating pump continuously forces water quietly across a set of aspirators, and therefore clean and efficient.

• Included (2) metal aspirators to create a vacuum with a built-in check valve to prevent backflow of water into the aspirator pump.

• Submerged parts: Type 304 stainless steel, polypropylene silicone, and nickel-coated brass.

• Tank features a drain port and spigot for easy water changes.

• Unlike other vacuum pumps the VE-11 can suck a little bit of solvent. (water)

Included Accessories • Tank / Aspirating pump / Tank closure.

• Two aspirators.

• Two ø6mm (0.02˝) silicone rubber tube 20cm (0.7 ft) in length and an additional ø6mm (0.02˝) silicone rubber tube 100cm (3.3 ft)in length.

69

Aspirators

Cooling coil

MVP-6 Rotary Vacuum PumpOptional Accessories •Oilmisttraps(TMF -12)

Rotary Vacuum Pumps

Optional Accessories • Vacuum gauge / regulator: to monitor and control the vacuum

pressure. (between 0.0267~0.0998MPa / 7.9~29.5˝ Hg)

• Cooling coil: to prevent vacuum from decreasing due to tempe-rature increase.

• Aspirators: nickel-coated brass, with inner ball, and check valve to prevent backflow of water.

Description Cat. No.Vacuum gauge / regulator AAA71531Cooling coil AAH71501Aspirator AAH71121

Specifications & Ordering Informations Model VE-11

Bath volume (L / cu ft) 9.5 / 0.3Max. vacuum (Mpa / Hg) 0.0998 / 29.5”Free-air capacity 18L/minute(0.6cfm)×2ea

MaterialBath PolypropyleneAspirator Nickel-coatedbrass×2ea

Dimensions

Bath internal (W×L , D) (mm / inch) 298×210, 227 / 11.7×8.3 ,8.9Overall (W×L×H) (mm / inch) 330×265×390 / 13.0×10.4×15.4Inhale nozzle externalØ9.5mm(0.4”)×2eaDrain cook, over flow nozzle (mm / inch) Ø17.0/0.7Net weight (kg / lbs) 5.7 / 12.6

Electrical Requirements 230V / 50,60Hz / 0.7A 120V / 50,60Hz / 1.4A Cat. No. AAH71015K AAH71016U

Feature • Rotary vacuum pump equipped with direct connect oil seal

prevents air reflux, essentially used with vacuum ovens to achieve a higher level of vacuum pressure.

• Oil mist trap, an optional feature, prevents oil in-flow.

Specifications & Ordering InformationsModel MVP - 6

Pumping speed (L / min) 100Msx. pressure (Pa) 6.7×10 -2

Motor power (W) 400Motor speed (rpm) 1750Recommended oil (L) 1.1Inlet / Outlet port (DN) 25KFWeight (Kg) 22.5 (49.6lb)Electrical Requirement 230V, 50 / 60HzCat. No. BEH73005KElectrical Requirement 120V, 60HzCat. No. BEH73006U

Accessories Model Electrical Requirement Cat. No.

Related accessory OilMistTrap BEH73501

Recirculating Coolers - Basic type

Low Temp. Recirculating Coolers - General Type

Low Temp. Recirculating Coolers - Intelligent type

Recirculating Coolers(Chillers)

Selection GuideRecirculating Cooler

DescriptionWorking Temp.

Range (℃ / ℉)

Cooling capacity at 10℃ [Kw]

Pump (50Hz)

PageMax. flow rate (L / min, gal / min)

Max. pressure (bar / psi)

Basic type

HX-20

+3 to 40 / +37.4 to 104

1.438 / 10.03 1.58 / 22.92

72

HX-25 1.7HX-20H 1.4

45 / 11.89 4.3 / 62.37HX-25 H 1.7HX-35H 3.1HX-45H 3.6HX-55H 5.1

General type (Low temp.)

HL-05

-20 to 40 / -4 to 104

0.50

50 / 13.2 1.0 / 14.5

74

HL-10 0.60 HL-15 1.15 HL-20 1.50 HL-15H 1.15

40 / 10.57 2.8 / 40.6HL-20H 1.15 HL-25H 1.80 HL-35H 2.30 HL-45H 4.50

70 / 18.49 6 / 87.0HL-55H 6.00

Intelligent type (Low temp.)

HS-15

-20 to 40 / -4 to 104

1.15

40 / 10.57 2.8 / 40.6

76

HS-20 1.50 HS-25 1.80 HS-35 2.30 HS-45 4.50 HS-55 6.00 HS-25H 1.80

70 / 18.49 6 / 87.0HS-35H 2.30 HS-45H 4.50 HS-55H 6.00


for Recirculating Cooler 78 - 79

Safety functions1) Self - protecting cut-off function and signal : - For over temperature, the power supply is


- Over - current Circuit breaker for user safety.

2) Low fluid level and dry - running protection : - Intermittent tone alert sounds and optical

signals alarms display on the control panel.

3) Double service valve provided to prevent ref-rigerant leakage.

Optimum control performance1) Functional LCD (resolution 0.1℃) keypad type

display : Designed to simplify operation with a VFD touch screen type display (HL / HS-series)

- Self-diagnostic function identifies equipment errors.

- Recognizable and convenient keypad . - Clear and easy-to-use LCD display.

2) Bright LED water level indicator

3) Pump pressure gauge

4) Run, compressing, pumping visual indicator

5) Eco-friendly R-404A or R507 refrigerant

6) Hot gas by-pass (only HL/HS series)


chamber and dirt repellent powder coated external surface.

2) Stainless steel submerged parts are resistant to corrosion against all usual bath fluids.

3) Pump pressure can be controlled using a bypass function. (only for HX-H type)

4) Removable gridded vent for reducing condenser contamination and to facilitate cleanliness.

5) A wide (Ø120mm / 4.72″) solution inlet is for easy and safe pouring of solution.

6) Wheels allow for easy mobility.

7) Computer Interface. (only HS series)

8) Warning alarm/monitoring system. - Over temperature. - Lack of bath solutions.

9) Pressure gauge comes standard with recirculating units to provide fluid system diagnostics at a glance and for observing the pump pressure.

Technical Benefits


Recirculating CoolersHX-Series HL/HS-Series

AAS • •Autoclaves • •Calorimeters •CCM cameras •Combinatorial chemistry •Cooling of peltier elements •Diffusion pumps • •Distillation apparatus • •Dosing and gluing techniques •Drying of gas •Electrophoresis chambers • •Gas chromatographs •General industries • •General laboratory apparatus • •Lasers •Mass spectrometers • •Mills and kneaders •NMR • •Pilot plants • •Plastic industries • •Reaction vessels • •Rotary evaporators • •SEM •Semiconductor industries • •Soxhlet installation •Spectrometers • •Vacuum systems • •

* General purpose use and applications.

72


Providing a constant temperature control and high cooling efficiency.

Operating cost can be reduced by using the recirculator for cooling water. It is eco-friendly and reduces energy consumption.

Operating features • Control temperature range is from 3℃~40℃.

• Clear and easy-to-use LCD display. (resolution 0.1℃)

• Bright LED water level indicator can be seen from a distance.

• Low fluid level and dry-running protection when triggered shows an error symbol on the display and an audible buzzer sound.

• If the equipment operates at 40℃ or above due to the external environment, user can simply identify the error with a visual signal or an audible buzzer sound.

• Pump pressure can be controlled using a by-pass function. (only H type)

Constructional features • The refrigerating system is designed to reduce energy consumption

and to maximize in refrigerating efficiency.

• Eco-friendly R-404A refrigerant is used to prevent environmental pollution. Double service valve is used to prevent refrigerant leakage.

• Removable gridded vent for reducing condenser contamination and to facilitate cleanliness.

• A plastic solution inlet is for easy and safe pouring of solution into the chiller unit.

• Pressure gauge comes standard with chiller units to provide fluid system diagnostics at a glance and for observing the pump pressure.

• Wheels allow for easy mobility throughout the lab.

• The beautifully designed chiller is compact.

• Different types of pumps and valves come standard with the chiller to provide versatility.

• Variety of accessories are available to meet user’s different lab environment needs. (refer to accessories)

Testing in accordance with DIN EN 12876Optional Accessories •Fittings,Adapters

see page 78-79 •Tubing,Insulations •Tubeclamps •Bathfluid


LCD Display

Pressure Gauge Level Indicator

73

Pumping Capacities (Bath fluid : water)

Centrifugal Magnetic


Model HX-20 HX-25 HX-20H HX-25H HX-35H HX-45H HX-55H

Temperature1)

(bath fluid : water)

Working temperature range (℃ / ℉)

+3 to 40 / +37.4 to 104

Temperature stability at 15℃ (±℃ / ℉)

1 / 1.8

Cooling capacity (bath fluid : water)

at20℃ (kW) 1.9 2.4 1.9 2.4 3.6 4.7 7.1at10℃ (kW) 1.4 1.7 1.4 1.7 3.1 3.6 5.1at5℃ (kW) 1.0 1.4 1.0 1.4 2.4 2.9 4.2

PumpMax. flow rate(L / min, gal / min) 38 / 10.03 38 / 10.03 45 / 11.89 45 / 11.89 45 / 11.89 45 / 11.89 45 / 11.89

Max. pressure (bar / psi) 1.58 / 22.92 1.58 / 22.92 4.3 / 62.37 4.3 /62.37 4.3 /62.37 4.3 / 62.37 4.3 / 62.37

Dimension

Max. filling capacity(L / cu ft) 35 / 1.24 35 / 1.24 35 / 1.24 35 / 1.24 45 / 1.59 45 / 1.59 45 / 1.59

For tubing dia(mm / inch) 20 / 0.79 20 / 0.79 20 / 0.79 20 / 0.79 20 / 0.79 20 / 0.79 20 / 0.79

Overall(W×L×H, mm / inch)

610×670×970 /24.0×26.4×38.2

740×730×1065 /29.1×28.7×41.9

Net weight (kg / lbs) 93 / 205 101 / 223 97 / 214 105 / 231 120 / 265 130 / 287 140 / 309Electrical Requirements (220V, 60Hz) 8.5A 9A 9A 9.5A 15ACat. No. AAA64011 AAA64021 AAA64111 AAA64121 AAA64131 - -Electrical Requirements (230V, 50Hz) 7A 7.6A 10.5A 11A 17ACat. No. AAH64012K AAH64022K AAH64112K AAH64122K AAH64132K - -Electrical Requirements (120V, 60Hz)

Cat. No. AAH64013U AAH64023U - - - - -Electrical Requirements (380V, 60Hz) 10A 11.5ACat. No. - - - - - AAA64149 AAA64159Electrical Requirements (380V, 50Hz) 7A 8.5ACat. No. - - - - - AAH64148K AAH64158K

1)Technicaldata(accordingtoDIN12876)

*Abovespeificationvalueisrecordedby50Hz.2)OnlyHX-45H,55Hisrecordedby380V,60Hz.

*Theperformancevaluesreferto+20℃(68℉) ambienttemperature.*Productperformancemaybeaffectedbyambienttemperatures.



74


Powerful recirculating coolers, the HL series provide a wide range of cooling capacities with temperature reliability. Innovative control system, with a dynamic pumping capacity, and ideal for external temperature applications. Broad range of models to choose from based on working temperature range.

Testing in accordance with DIN EN 12876Optional Accessories •Fittings,Adapters

see page 78-79 •Tubing,Insulations •Tubeclamps •Bathfluid


Operating features • Temperature range is from -20℃~40℃.

• Bright LED water level indicator can be easily identified.

• Low fluid level and dry-running protection when triggered shows an error symbol on the display and an audible sound.

• If the equipment operates at 40℃ or above due to the external environment, user can simply identify the error with a visual or an audible sound.

• Designed to simplify operation with a touch screen type display. - Easy-to-read VFD display with interactive touch keys. - Setting and resolution indication 0.1℃/℉. - Quick keypad lock prevents accidental parameter changes. - Signal indicator for operation status.


and to maximize in refrigerating efficiency.

• Eco-friendly R-404A / R507 refrigerant is used to prevent enviro-nmental pollution. Double service valve is used to prevent refrigerant leakage.


• A wide (Ø120mm / 4.72″) solution inlet is for easy and safe pouring of solution into the recirculating cooler.

• Pressure gauge comes standard for observing the pump pressure

• The refrigeration system can be observed easily to diagnostic at a glance by high / low pressure gauges. (HL-25H, 35H, 45H, 55H models)

• Wheels allow for easy mobility.

• The beautifully designed and compact.

• Different types of pumps come standard with the recirculating cooler to provide versatility.

• Warning alarm/monitoring system. - Over temperature. - Lack of bath solutions.

• Variety of accessories is available to meet user’s different lab environment needs. (Refer to accessories)

75

Pumping Capacities (Bath fluid : Ethtylene glycol mix 1:1 Water)

Submersible pump

0

0.6

0.4

0.2

0.8

1.0

1.2

1.4

10 20 30 40 50 60

Flow rate (L/min)

60Hz

60Hz

50Hz

50Hz

50Hz, 60Hz

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 50 60 70

Flow rate (L/min)

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 6050 70

Flow rate (L/min)

pressure (Bar)

0

0.6

0.4

0.2

0.8

1.0

1.2

1.4

10 20 30 40 50 60

Flow rate (L/min)

60Hz

60Hz

50Hz

50Hz

50Hz, 60Hz

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 50 60 70

Flow rate (L/min)

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 6050 70

Flow rate (L/min)

pressure (Bar)

0

0.6

0.4

0.2

0.8

1.0

1.2

1.4

10 20 30 40 50 60

Flow rate (L/min)

60Hz

60Hz

50Hz

50Hz

50Hz, 60Hz

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 50 60 70

Flow rate (L/min)

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 6050 70

Flow rate (L/min)

pressure (Bar)


Model HL-05 HL-10 HL-15 HL-20 HL-15H HL-20H HL-25H HL-35H HL-45H 2) HL-55H 2)

Temperature 1) (bath fluid : Ethtylene glycol mix 1:1 Water)

Working Temperature range (℃ / ℉)

-20 to 40 / -4 to 104

Temperature stability at 15℃, (±℃ / ℉)

1 / 1.8

Cooling capacity (bath fluid : Ethtylene glycol mix 1:1 Water)

at 20℃ (kw) 0.60 0.70 1.45 1.80 1.45 1.80 2.50 3.30 6.50 7.10

at 10℃ (kw) 0.50 0.60 1.15 1.50 1.15 1.50 1.80 2.30 4.50 6.00

at 0℃ (kw) 0.35 0.42 0.86 1.15 0.86 1.15 1.10 1.70 3.00 4.10

at -10℃ (kw) 0.18 0.32 0.62 0.85 0.62 0.85 0.65 1.00 2.10 2.50

at -20℃ (kw) 0.04 0.14 0.30 0.40 0.30 0.40 0.40 0.55 1.20 1.50

Pump

Max. flow rate (L / min, gal / min) 50 / 13.2 40 / 10.57 70 / 18.49

Max. pressure (bar / psi) 1.0 / 14.5 2.8 / 40.6 6 / 87.0

Dimension

Max,. filling capacity (L, cu ft) 10 / 0.35 15 / 0.53 15 / 0.53 25 / 0.88 40 /1.41

For tubing dia (mm / inch) 12.7 / 0.5 20 / 0.79

Overall (WxLxH, mm / inch)

400×545×690 / 15.7×21.5×27.2

510×640×715 / 20.1×25.2×28.1

510×640×715 / 20.1×25.2×28.1

550×850×1100 / 21.7×33.5×43.3

600×1000×1300 / 23.6×39.4×39.4

Net weight (kg / Ibs)62.85 / 138.6

64.85/ 143.0

86.5 / 190.7

87.35 /192.9

91.8 / 202.4

92.65 / 204.3

141.3 / 310.9

146.3 /321.9

171 ±10 /377 ±22

176 ±10 / 388 ±10

Electric requirement (230V, 60Hz) 5.0A 5.5A 6.5A 7.5A 6.5A 7.5A 9.5A 13.5A

Cat. No. AAH65001 AAH65011 AAH65021 AAH65031 AAH65121 AAH65131 AAH65141 AAH65151 - -

Electric requirement (230V, 50Hz) 4.5A 5.0A 6.0A 7.0A 6.0A 7.0A 7.5A 12.5A

Cat. No. AAH65002 AAH65012 AAH65022 AAH65032 AAH65122 AAH65132 AAH65142 AAH65152 - -

Electric requirement (120V, 60Hz) 10.0A 11.0A 13.0A 15.0A

Cat. No. AAH65003 AAH65013 AAH65023 AAH65033 - - - - - -

Electric requirement (380V, 60Hz) 5.5A 7.0A

Cat. No. - - - - - - - - AAH65169 AAH65179

Electric requirement (380V, 50Hz) 5.0A 6.0A

Cat. No. - - - - - - - - AAH65168 AAH65178


*Abovespeificationvalueisrecordedby50Hz.2)OnlyHL-45H,55Hisrecordedby380V,60Hz.




• HL - 05, 10, 15, 20 models • HL - 15H, 20H, 25H, 35H models • HL - 45H, 55H models

76

Low Temp. Recirculating Coolers - Intelligent Type

Adjustable, precise PID temperature controller beneficial for various cooling tasks, for use in the science, research, and industrial laboratories.Innovative and exclusive controller can be adjusted the cooling capacity from 1% to 100%

Operating features • Temperature range is from -20℃~40℃. • As an option an external sensor can be directly installed into the

cooling circuit for monitoring and regulating of temperatures. • Precise temperature stability ± 0.2℃ (at 15℃) without heater. • Bright LED water level indicator can be easily identified. • Low fluid level and dry-running protection when triggered shows

an error symbol on the display and an audible sound. • If the equipment operates at 40℃ or above due to the external

environment, user can simply identify the error with a visual or an audible sound.

• Designed to simplify operation with a touch screen type display. - Easy-to-read VFD display with interactive touch keys - Setting and resolution indication 0.1℃/℉ - Quick keypad lock prevents accidental parameter changes - Signal indicator for operation status


and to maximize in refrigerating efficiency. • Available external temperature sensor (Pt 100) for measured value • Computer Interface -Software provided -Save data in excel format -Storage of program information, backup of value settings/recovery,

and temperature values -RS-232C comes standard • Eco-friendly R-404A / R507 refrigerant is used to prevent enviro-

nmental pollution. Double service valve is used to prevent refrigerant leakage.


• A wide (Ø120mm / 4.72″) solution inlet is for easy and safe pouring of solution into the recirculating cooler.

• Pressure gauge comes standard for observing the pump pressure • The refrigeration system can be observed easily to diagnostic at a

glance by high / low pressure gauges. (HL-25H, 35H, 45H, 55H models)

• The beautifully designed and compact. • Different types of pumps come standard with the recirculating

cooler to provide versatility • Warning alarm/monitoring system - Over temperature - Lack of bath solutions

• Variety of accessories is available to meet user’s different lab env-ironment needs. (Refer to accessories)


Digital controllor

RS-232 Serial port & etc

77

0 10 20 30 40 50

Flow rate (L/min)

50Hz, 60Hz 50Hz, 60Hz

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 50 60 70

Flow rate (L/min)

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 6050 70

Flow rate (L/min)

pressure (Bar)

0 10 20 30 40 50

Flow rate (L/min)

50Hz, 60Hz 50Hz, 60Hz

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 50 60 70

Flow rate (L/min)

pressure (Bar)

0

1.0

2.0

3.0

4.0

5.0

6.0

10 20 30 40 6050 70

Flow rate (L/min)

pressure (Bar)

Pumping Capacities (Bath fluid : water)

Submersible pump


Model HS-15 HS-20 HS-25 HS-35 HS-45 HS-55 HS-25H HS-35H HS-45H HS-55H

Temperature 1) (bath fluid : Ethtylene glycol mix 1:1 Water)

Working Temperature range (℃ / ℉)

-20 to 40 / -4 to 104

Temperature stability at 15℃, (±℃ / ℉)

0.2 / 0.36

Cooling capacity (bath fluid : Ethtylene glycol mix 1:1 Water)

at 20℃ (kw) 1.45 1.80 2.50 3.30 6.50 7.10 2.50 3.30 6.50 7.10

at 10℃ (kw) 1.15 1.50 1.80 2.30 4.50 6.00 1.80 2.30 4.50 6.00

at 0℃ (kw) 0.86 1.15 1.10 1.70 3.00 4.10 1.10 1.70 3.00 4.10

at -10℃ (kw) 0.62 0.85 0.65 1.00 2.10 2.50 0.65 1.00 2.10 2.50

at -20℃ (kw) 0.30 0.40 0.40 0.55 1.20 1.50 0.40 0.55 1.20 1.50

Pump

Max. flow rate (L / min, gal / min) 40 / 10.57 70 / 18.49

Max. pressure (bar / psi) 3.3 / 47.86 6 / 87.0

Dimension

Max. filling capacity (L, cu ft) 15 / 0.53 25 / 0.88 40 / 1.41 25 / 0.88 40 / 1.41

For tubing dia (mm / inch) 20 / 0.79

Overall (W×L×H, mm / inch)

510×640×715 / 20.1×25.2×28.1

550×850×1100 / 21.7×33.5×43.3

600×1000×1300 / 23.6×39.4×39.4

550×850×1100 / 21.7×33.5×43.3

600×1000×1300 / 23.6×39.4×39.4

Net weight (kg / Ibs)91.8 / 202.4

92.65 / 204.3

141.3 / 310.9

146.3 / 321.9

168 ±10 / 370 ±22

173±10 / 381 ±22

144.3 / 317.5

149.3 / 328.5

171 ±10 / 377 ±22

176 ±10 / 388 ±22

Electric requirement (230V, 60Hz) 6.5A 7.5A 9.5A 13.5A 9.5A 13.5A

Cat. No. AAH66011K AAH66021K AAH66031K AAH66041K - - AAH66131K AAH66141K - -

Electric requirement (230V, 50Hz) 6.0A 7.0A 7.5A 12.5A 7.5A 12.5A

Cat. No. AAH66012K AAH66022K AAH66032K AAH66042K - - AAH66132K AAH66142K - -

Electric requirement (380V, 50 / 60Hz) 5.5A 7.0A 5.5A 7.0A

Cat. No. - - - - AAH66058K AAH66068K - - AAH55158K AAH66168K


*Abovespeificationvalueisrecordedby50Hz.2)OnlyHS-45H,55Hisrecordedby380V,60Hz.


Low Temp. Recirculating Coolers - Intelligent Type


• HS-15, 20, 25, 35, 45, 55 models • HS-25H, 35H, 45H, 55H models

78

Barbed fittings Barbed fitting systems are geared for quick connecting of various size type tubes using pipe fittings, tube fittings, and hose fittings without tools.

Cat. No. DescriptionHXE1066 3/4”Maletobarbedfittingfortubing1”innerdiaHXE1067 3/4”Maletobarbedfittingfortubing3/4”innerdiaHXE1068 3/4”Maletobarbedfittingfortubing5/8”innerdiaHXE1069 3/4”Maletobarbedfittingfortubing1/2”innerdiaHXE1070 3/4”Maletobarbedfittingfortubing3/8”innerdia

AAA64501 1”BarbedfittingssetwithBallvalveAAA64502 3/4”BarbedfittingssetwithBallvalveAAA64503 5/8”BarbedfittingssetwithBallvalveAAA64504 1/2”BarbedfittingssetwithBallvalveAAA64505 3/8”BarbedfittingssetwithBallvalveAAA64506 1”BarbedfittingssetwithGatevalveAAA64507 3/4”BarbedfittingssetwithGatevalveAAA64508 5/8”BarbedfittingssetwithGatevalveAAA64509 1/2”BarbedfittingssetwithGatevalveAAA64510 3/8”BarbedfittingssetwithGatevalve

Connectors / AdaptersCat. No. DescriptionHXE1105 3/4”Maleto3/4”FemaleHXE1106 3/4”Maleto5/8”FemaleHXE1107 3/4”Maleto1/2”FemaleHXE1108 3/4”Maleto3/8”FemaleHXE1109 3/4” Male to 3/4” MaleHXE1110 3/4” Male to 5/8” MaleHXE1111 3/4” Male to 1/2” MaleHXE1112 3/4” Male to 3/8” Male

One touch adapters set Connect and exchange rigid tubing easily.

Cat. No. DescriptionHXE1075 12mmOnetouchadapter id9.0mm,od12.0mmHXE1076 10mmOnetouchadapter id6.5mm,od10.0mmHXE1077 8mmOnetouchadapter id5.5mm,od8.0mmHXE1078 6mmOnetouchadapter id4.0mm,od6.0mm

AAA64531 12mmAdapterssetwithBallvalveAAA64532 10mmAdapterssetwithBallvalveAAA64533 8mmAdapterssetwithBallvalveAAA64534 6mmAdapterssetwithBallvalve

Flexible fittings Stainless tubing designed for superior flexibility and with good chemical resistance.

Cat. No. DescriptionHXE1071 3/4”Maleto3/4”FlexiblefittingHXE1072 3/4”Maleto1/2”Femalewith1/2”Maleto1/2”Flexiblefitting

AAA64521 3/4”FlexiblefittingssetwithBallvalveAAA64522 1/2”FlexiblefittingssetwithBallvalveAAA64523 3/4”FlexiblefittingssetwithGatevalveAAA64524 1/2”FlexiblefittingssetwithGatevalve

Accessories & Options for Recirculating Coolers

Barbed fittings Connectors / Adapters Flexible fittings One touch adapters set

Recirculating Coolers


79

TubingCat. No. DescriptionHXE1079 1m12mmUrethanetubing id9.0mm,od12.0mmHXE1080 1m10mmUrethanetubing id6.5mm,od10.0mmHXE1081 1m8mmUrethanetubing id5.5mm,od8.0mmHXE1082 1m6mmUrethanetubing id4.0mm,od6.0mmHXE1083 1m1”PVCtubingwiththread id25.0mm,od31.0mmHXE1084 1m3/4”PVCtubingwiththread id19.0mm,od24.0mmHXE1085 1m5/8”PVCtubingwiththread id16.0mm,od20.5mmHXE1086 1m1/2”PVCtubingwiththread id12.0mm,od16.0mmHXE1087 1m3/8”PVCtubingwiththread id10.0mm,od14.0mmHXE1088 1m1”PVCtubingwithwire id25.0mm,od33.0mmHXE1089 1m3/4”PVCtubingwithwire id19.0mm,od26.0mmHXE1090 1m5/8”PVCtubingwithwire id15.0mm,od22.0mmHXE1091 1m1/2”PVCtubingwithwire id12.0mm,od18.0mmHXE1092 1m3/8”PVCtubingwithwire id9.0mm,od15.0mm

Tubing insulations EPDM insulation is used to reduce heat loss and condensation from cold water plumbing, chilled water, and refrigeration lines.

Cat. No. DescriptionHXE1093 EPDMInsulation,16mminnerdia.(9T)HXE1094 EPDMInsulation,19mminnerdia.(9T)HXE1095 EPDMInsulation,25mminnerdia.(9T)HXE1096 EPDMInsulation,28mminnerdia.(9T)HXE1097 EPDMInsulation,35mminnerdia.(9T)

Flexible tubingCat. No. DescriptionHXE1073 3/4”Flexibletubing(sus304,m)

HXE1074 1/2”Flexibletubing(sus304,m)

Tube clampsCat. No. DescriptionHXE1098 1”ClampHXE1099 3/4”Clamp

HXE1100 5/8”Clamp

HXE1101 1/2”ClampHXE1102 3/8”Clamp

Distributing fittings Distributing fittings connect even with small tubes with barb fittings.

Cat. No. DescriptionAAA64541 3-Waydistributingbarbedfittingsset(1/4”)AAA64542 3-Waydistributingbarbedfittingsset(3/8”)

Tubing Tubing insulations Tube clamps Distributing fittings


Accessories & Options for Recirculating CoolersRecirculating Coolers

Bath fluid Are bath fluids that may be suitable to use with the recirculating

cooler, in place of water.

Cat. No. DescriptionHXE1113 Distilledwater(20L)HXE1114 Ethyleneglycol(4L)HXE1115 Ethyleneglycol(20L)

External Sensor (only HS series) External temperature sensor (Pt 100) for measured value.

Cat. No. DescriptionCFA1943 3mcableforPt100sensor

Selection GuideLaboratory Refrigerators & Freezers



ChamberVolume (L /cu ft)

Door type Shelve or Drawer Page

General Purpose LaboratoryRefrigerators

CLG-150

2 ~ 10 / 35.6 ~ 50

156 / 5.5

Glass or Solid

Shelve

82 - 84

CLG-300 319 / 11.3CLG-650 636 / 22.5CLG-850 843 / 29.7CLG-1400 1395 / 49.3

Pharmacy Refrigerators

CLP-650 636 / 22.5DrawerCLP-850 843 / 29.7

CLP-1400 1395 / 49.3

General Purpose LaboratoryFreezer

FLG-150-20 ~ -30 / -4 ~ -22

156 / 5.5Solid ShelveFLG-300 319 / 11.3

FLG-650 636 / 22.5


for General Purpose Laboratory Refrigerators85for Pharmacy Refrigerators

for General Purpose Laboratory Freezers

General Purpose Laboratory Refrigerators.Pharmacy Refrigerators.General Purpose Laboratory Freezers.


Safety functions1) Visual and audible alarms. - High / low temperature.

2) 2 individual over-current fuses for safety.

3) Door-open warning alarm : - During 2 minutes, visual alarm and after 2

minutes, intermittent audible alarm. - Fan automatically stops when the door is opened

to minimize heat loss and protect operator. - Equipped with a lock and key.

Optimum control performance1) Temperature selection either in ℃ or ℉.

2) CPU logic control system. - Economic power consumption control. - Optimum control of temperature.

3) User friendly controls with a splash proof / easy to clean keypad and with a clear VFD display.

4) Quick keypad lock button prevents accidental parameter changes.

5) Touch screen type monitor. - Colorful and bright VFD display with interactive

touch keys. - Visible set values: set point (SP) / present value (PV)

displayed together on the vibrant VFD display.

6) Optimizing defrost system. - Non-conventional defrost system, with an ad-

vanced defrost sensor (dual sensor) manages the defrost cycle by detecting trace amounts of frost build-up in the evaporator.

(Only for CLG / CLP / FLG-150, 300, 650 series) - The unique dual sensor defrost system is

initiated when needed, to maintain internal temperature uniformity during operation.

(Only for CLG / CLP-850, 1400 series)


chamber and dirt repellent powder coated external surface.

2) Perfectly magnetic sealed consistently maintains the temperature and the fully insulated chamber keeps the exterior shell of the equipment at a safe temperature.

3) Adjustable electro polished stainless steel shelving provides air flow around samples for uniformed tempering and allow for easy cleaning.

4) Heat treated glass door provides a clear obser-vation of samples.

Protect the global environment1) Use of HFC refrigerant prevents damage to the

ozone layer. - Complies with the Montreal Protocol on Sub-

stances That Deplete the Ozone Layer control measures.

Technical Benefits


Laboratory Refrigerators & FreezersCLG/CLP series FLG series

BOD Protocols •Chemical Storage •Chromatography Apparatus and Instrumentation •Clinical • •Culture •Enzymes •General Storage • •Life science •Medication • •Pharmaceutical •Pre-Freezing •Reagents •Test Samples • •Temperature Sensitive Materials •Vaccines • •

*For general purpose use and storage applications.

82

Laboratory Refrigerators & FreezersLaboratory Refrigerators & Freezers

General Purpose Laboratory Freezers

General Purpose Laboratory RefrigeratorsPharmacy Refrigerators

83


Constructional features • Spacious and with different capacity sized refrigeration units to

choose from. - General purpose laboratory and pharmacy refrigeration units

come in volume capacities of 1395 liters. - General purpose laboratory freezer units come in volume cap-

acities of 636 liters.

• High quality #304 grade stainless steel interior.

• Fluorescent lighting included with general purpose laboratory and pharmacy refrigeration units.

- General Purpose Laboratory Refrigerators. (Excludes 150 Series)

- Pharmacy Refrigerators.

• Heat treated glass door for sample observation. (Only glass types) - Double-pane glass door with built in wire heaters in only G type

refrigeration units, to provide a clear observation of samples.

• Magnetic door seal. - Double cushioned packing provides impact absorption from

opening and closing of refrigeration or freezer unit door. - The magnet in the double cushioned packing ensures a perfect

seal around the chamber.

• Casters, comes standard with the laboratory refrigeration and freezer units and allows for easy transport and installation.

(Excludes 150 Series)

• Cable port for external probes or wires. (Only CLG / CLP models excludes 150 Series) - 50mm diameter cable port comes standard on the left side of

the unit. - Additional 50mm diameter cable ports can be custom ordered.

(optional)

• 150 series stand and stacking kit optional. (up to 2 chambers high) - For use in labs with limited space.

• Efficient system with durable parts. - Evaporating system for better thermal efficiency with corrosion-

resistant materials.

• Timer less Defrost system. - Advanced defrost sensor (dual sensor) manages the defrost cycle

by detecting trace amounts of frost build-up in the evaporator. (Only for CLG/CLP/FLG-150,300,650 series) - Unique dual system defroster only runs when needed therefore

internal temperature uniformity is maintained. (Only for CLG/CLP-850, 1400 series)

Operating features • CPU logic control system. - Optimum control of temperature with economical power

consumption.

• Enhanced digital controller, designed to simplify operation with a touch of a screen and with used of knob.

• Touch screen type display. - Colorful and bright VFD display with interactive touch keys. - Quick keypad lock button prevents accidental parameter

changes. - Visible set values : set point (SP) / present value (PV) displayed

together on the vibrant VFD display. - Setting and resolution indication : ∙ Temperature: 0.1℃ / ℉. ∙ Signal indication for operation status.

• Convenient and easy to maintain-warning alarm / monitoring system, and door lock system, etc.

• Recorder. (optional) - 6-point dot type recorder with a digital display. - Temperature recorder, 6 inches (152 mm) chart, 7-days drive. - Thermal Line type recorder.

Safety functions • Over current protection.

• Warning alarm with visual indicators and audible alarms. - Door open alarm. - High / low temperature alarm.

• Vice lock door closing mechanism.

With advanced safety features, the cold storage system providesa stable refrigerated environment for life science, pharmaceutical, biotechnology, clinical, and industrial laboratories.

84


General Purpose Laboratory Refrigerators

Model CLG-150 CLG-300 CLG-650 CLG-850 CLG-1400Chamber volume (L / cu ft) 156 / 5.5 319 / 11.3 636 / 22.5 843 / 29.7 1395 / 49.3Display VFD and touch-screenTemperature range (℃ / ℉) 2 ~ 10 / 35.6 ~ 50Refrigerator (Hp) 1/8 1/6 1/3 1/6×2ea 1/4×2eaDoor type Heated glass or SolidLighting - 18W Fluorescent lamp 32W Fluorescent lamp

MeterialInterior Stainless steel #304Exterior Steel, 1.0 mm, powder coatingInsulation 60mm, Polyurethane foam

Dimensions(W×D×H)

Interior (mm / inch)550×580×490/ 21.7×22.8×19.3

550×580×1000/ 21.7×22.8×39.4

650×675×1450/ 25.6×26.6×57.1

750×775×1450/ 29.5×30.5×57.1

1425×675×1450/ 56.1×26.6×57.1

Exterior (mm / inch)683×791×870/ 26.9×31.1×34.4

670×719×1515/ 26.4×28.3×59.6

770×815×1965/ 30.3×32.1×77.4

870×915×1965/ 34.3×36×77.4

1545×815×1965/60.8×32.1×77.4

Net weight (kg / Ibs) 100 / 220.4 130 / 286.6 210 / 463.0 260 / 573.2 350 / 771.6Electrical Requirements (120V, 60Hz) 4.0 A 4.5 A 6.5 A 9.0 A 13.0 A

Cat. No.Solid door type AAHE1003U AAHE1013U AAHE1023U AAHE1033U AAHE1043UGlass door type AAHE1103U AAHE1113U AAHE1123U AAHE1133U AAHE1143U

Electrical Requirements (230V, 60Hz) 2.0 A 2.3 A 4.0 A 5.0 A 6.0 A

Cat. No.Solid door type AAAE1001 AAAE1011 AAAE1021 AAAE1031 AAHE1041Glass door type AAAE1101 AAAE1111 AAAE1121 AAHE1131 AAAE1141

Electrical Requirements (230V, 50Hz) 2.0 A 2.3 A 4.0 A 5.0 A 6.0 A

Cat. No. Solid door type AAHE1002 AAHE1012 AAHE1022 AAAE1032 AAHE1042Glass door type AAHE1102 AAHE1112 AAHE1122 AAHE1132 AAHE1142

Pharmacy Refrigerators

Model CLP-650 CLP-850 CLP-1400Chamber volume (L / cu ft) 636 / 22.5 843 / 29.7 1395 / 49.3Display VFD and touch-screenTemperature range (℃ / ℉) 2 ~ 10 / 35.6 ~ 50Refrigerator (Hp) 1 / 3 1 / 6×2ea 1 / 4×2eaDoor type Heated glass or Solid Lighting 32W Fluorescent lamp


Dimensions(W×D×H)

Interior (mm / inch) 650×675×1450 / 25.6×26.6×57.1 750×775×1450 / 29.5×30.5×57.1 1425×675×1450 / 56.1×26.6×57.1Exterior (mm / inch) 770×815×1965 / 30.3×32.1×77.4 870×915×1965 / 34.3×36×77.4 1545×815×1965 / 60.8×32.1×77.4Net weight (kg / Ibs) 210 / 463.0 260 / 573.2 350 / 771.6

Electrical Requirements (230V, 60Hz) 4.0 A 5.0 A 6.0 A

Cat. No.Solid door type AAHE3021 AAHE3031 AAHE3041Glass door type AAHE3121 AAHE3131 AAHE3141

Electrical Requirements (230V, 50Hz) 4.0 A 5.0 A 6.0 A

Cat. No. Solid door type AAHE3022 AAHE3032 AAHE3042Glass door type AAHE3122 AAHE3132 AAHE3142

※ Other size of chamber also available. (156L,300L)

General Purpose Laboratory Freezers

Model FLG-150 FLG-300 FLG-650Chamber volume (L / cu ft) 156 / 5.5 319 / 11.3 636 / 22.5Display VFD and touch-screenTemperature range (℃ / ℉) -20 ~ -30 / -4 ~ -22Refrigerator (Hp) 1 / 2 3 / 4 1Door type Solid


Dimensions(W×D×H)

Interior (mm / inch) 550×580×490 / 21.7×22.8×19.3 550×580×1000 / 21.7×22.8×39.4 650×675×1450 / 25.6×26.6×57.1Exterior (mm / inch) 683×791×885 / 26.9×31.1×34.8 670×719×1530 / 26.4×28.3×60.2 770×815×1980 / 30.3×32.1×78Net weight (kg / Ibs) 100 / 220.4 130 / 286.6 210 / 463.0

Electrical Requirements (230V, 60Hz) 3.5 A 4.0 A 4.3 ACat. No. Solid door type AAHE2001 AAHE2011 AAHE2021Electrical Requirements (230V, 50Hz) 3.5 A 4.0 A 4.3 ACat. No. Solid door type AAHE2002 AAHE2012 AAHE2022

※ Permissible ambient Condition: Temperature 18 to 35℃ (64.4 to 86℉), Maximum relative humidity 85%. ※ Technical data. (according to DIN 12880)

85


Dot type recorder Chart type recorder

Thermal line type recorder

for CLG / CLP / FLG Recorders

Electrical outlet (CLG)

Stand with casters (Only CLG-150/FLG-150)

Others

Wire Shelves Wire Shelves (Slide type)

Drawer (Slide type)

Shelves


Include and Maximum Shelve Quantity

ProductsWire Shelves Wire Shelves (Slide type) Drawer (Slide type)

Include Maximum Include Maximum Include MaximumCLG-150 2 6 - 4 - 3CLG-300 3 11 - 7 - 5CLG-650 3 17 - 11 - 8CLG-850 3 17 - 11 - 8CLG-1400 6 34 - 22 - 16CLP-650 - 17 - 11 6 8CLP-850 - 17 - 11 6 8CLP-1400 - 34 - 22 12 16FLG-150 2 6 - 4 - 3FLG-300 3 11 - 7 - 5FLG-650 3 17 - 11 - 8

Sheleves, Drawers, Recoders, others


Shelves

AAAE1511 Wire Shelves for CLG / FLG-150 / 300 (Flat type, Included Shelf Bracket)

AAAE1512 Wire Shelves for CLG / CLP / FLG-650, CLG / CLP-1400 (Flat type, Included Shelf Bracket)

AAAE1513 Wire Shelves for CLG / CLP-850 (Flat type, Included Shelf Bracket)

AAAE1514 Wire Shelves for CLG / FLG-150 / 300 (Slide type, Included Guide Rail)

AAAE1515 Wire Shelves for CLG / CLP / FLG-650, CLG / CLP-1400 (Slide type, Included Guide Rail)

AAAE1516 Wire Shelves for CLG / CLP-850 (Slide type, Included Guide Rail)

DrawersAAAE1517 Drawer Shelves for CLG / FLG-150/300 (Slide type, Included Guide Rail)

AAAE1518 Drawer Shelves for CLG / CLP / FLG-650, CLG / CLP-1400 (Slide type, Included Guide Rail)

AAAE1519 Drawer Shelves for CLG / CLP-850 (Slide type, Included Guide Rail)

Recorders

AAA8T500 Recorder (6 Point)

AAAE1501 Recorder (Chart type, 6”, 24hr / 7day)

AAAE1502 Chart Recorder Paper (6”, 60 Package)

AAAE1503 Recorder (Thermal Line chart recorder)

OthersAAAE1521 Cable Port for CLG / CLPseries (50mm) - without150 modelsAAAE1532 Electrical Outlet for CLG / CLP series with 230V Outlet (Korea style) - without150 models

Advanced Orbital ShakersMini ShakersRocking & Waving Shakers

Dual-Action ShakersEconomic Shakers

Shakers

Selection GuideShakers

Description Speed Range [RPM]

MaximumAmplitude Size

[mm / inch, dia]

Net Weight[kg/Ibs] Page

Benchtoptype- Open-Air

SKC-6075

Advanced Orbital Shaker 10 to 500

19 / 0.7465 / 143.3

90

SKC-6100 25 / 0.98SKC-6200 50 / 1.96SKC-7075 19 / 0.74

75 / 165.4SKC-7100 25 / 0.98SKC-7200 50 / 1.96SK-300

Dual-Action Shaker 10 to 300

40 / 1.624 / 52.9

92SK-600 29 / 63.9SK-71 70 / 2.4 50 / 110.2SKF-2025

Economic Shaker

10 to 500 7 / 0.3

20 / 44.1

93

SKF-2050 10 to 400 13 / 0.5SKF-2075 10 to 300 19 / 0.7SKF-2025R 10 to 450 7 / 0.3SKF-2050R 10 to 350 13 / 0.5SKF-2075R 10 to 250 19 / 0.7SKF-3050 10 to 400 13 / 0.5

33.68 / 74.25

SKF-3075 10 to 300 19 / 0.7SKF-3100 10 to 300 25 / 1.0SKF-3050R 10 to 350 13 / 0.5SKF-3075R 10 to 250 19 / 0.7SKF-3100R 10 to 250 25 / 1.0CMS-350 Mini Shaker 50 to 300 13 / 0.5 8 / 17.6 94CRS-350 Rocking Shaker

10 to 100[ Tilt 7~13° adjustable] 3.68 / 8.11

95CWS-350 Waving Shaker [ Tilt 0~13° adjustable] 3.75 / 8.27

Separatory Funnel Shakers

Description Speed Range [RPM]

VerticalStroke Length

[mm / inch]

Net Weight[kg/Ibs] Page

Benchtoptype RS-1 Separatory Funnel

Shakers 50 to 300 40 / 1.6 24.0 / 52.9 96


for Shaker - Open-Air 97 - 101

Safety functions1) Self-protecting cut-off function :

- Over-current fuses for user safety.

2) User setting functions: Select automatic run or manual run after power has been interrupted.

3) Acceleration / deceleration circuit : (Excludes RS, CMS, CWS and CRS models)

- The shaker units stops and starts at the always same position.

- To prevent spillage from flasks and tubes the shaker gently starts up and gently stops.

4) If the load sensor detects any type of imbalance from the shaker it will reduce the shaking motion . (only SKC models)

Optimum control performance1) Easy to use, comes in a wide range of rpm setting

which covers most applications.

2) Professional electronic and program control. - Microprocessor PID controls. - Self-diagnostic function identifies any errors

and advises the user on how to correct the errors.

3) Multi-function shaking system: - Timer

SK SKF SKCWait on - • •Wait off • • •Program mode - - •

- Forward & Backward, Pause.

4) Similar key arrangements to the temperature humidity chamber, bath, circulator, and shaker.

- User-friendly controls, splash proof / easy to clean keypad and clear LED display.

(Only SK and SKF models) - Colorful and bright VFD display with interactive

touch keys. (SKC, CMS, CWS and CRS models)

5) End of shaking session unit stops while an audible alarm sounds. (Only RS models)

Ideal construction1) Dual shaking action- select from orbital or recip-

rocating shaking motion. (Only SK models)

2) Slim and low-profile design, reduces the vibration and sliding caused by the high speed shaking motion.

3) Brushless DC motor creates a smooth and quiet uniformed shaking motion.

4) Innovative triple-cam shaking system. (SKC models)

5) DD(Direct drive) motor allows the shaker to hold heavy loads, is quiet, high rpm, and durable.

(SKC models)

6) Dirt repellent powder coated external surface.

7) Wide range of accessories.

Technical Benefits


Open-Air and Separatory funnel ShakersSKC series SK. SKF series RS series CMS CRS / CWS

Bacterial suspensions • •Cell culture • • • •Diagnostic tests • • •Drug analysis • • • • •ELISA • • • •

Environmental technology (waste water and soil analysis) • • •

Enzyme immunoassays • • • •Extraction procedures • • • •General mixing • • • • •Hemolyzing blood sparation • • • •Hybridization • • • •Inorganic solvent extraction •Soil compound extraction •Solubility studies • • •

Solvent extraction for water quality analysis •

Staining and destaining • • • •Perparation for metal analysis •Pharmaceutical profiling • • • • •Protein synthesis • • • •

* For general purpose use applications.

88

ShakersShakers - Open - Air

Please visit .comFor further information on Jeio Tech´s Shaker productsInformation is readily available on our website.

89

Convenient and unique Shaking FunctionsThis unique shaker stops and starts at the always same position. This shaker is beneficial for semi-automated dosing or sampling of samples. Select between clockwise and counterclockwise shaking motion.

- These durable shaking systems are able to function stably at low rpm settings. (between 10-25rpm) Usually the SK models-10rpm (SKC models-30rpm) setting is great for low damage biological mixing tests and cell cultivation.

Shaking SystemShakers

only start / stop here

Power offPower off

Reciprocating motion

Orbital motion

Dual-action Shaking SystemAll SK, SI, and IS shaking units are dual-action. The user is able to select between orbital and reciprocating shaking motion. Simply change the type of shaking motion by changing the way the platform is connected.

Multi-function Shaking SystemIntensive multi-function shaking system surpasses all the previous levels of shaker units. Mix and match clockwise, counterclockwise, start, and stop motions. (Making 6 possible combinations - refer to each model spec.)

90

SKC-7075Optional Accessories •Universalplatforms,Dualuniversalplatforms,

see page 97-101 •Rubbermats,Universalattachments •Flaskclamps,Funnelclamps •Testtuberacks,Springwireracks,HalfSpringwireracks •Microplateholders •Labsticker

SKC Control Display

Advanced Orbital ShakersShakers

Please visit .comFor further information on Jeio Tech´s Shaker products Information is readily available on our website.

91

Advanced Orbital ShakersInnovative triple-cam shaking system with compact design and superior fabrications.Exclusive SKC shaker series can carry out low maintenance applications that demand heavy duty, continuous operation, and high reliability testing.

Shakers

Constructional features • Microprocessor PID controller provides feedback to motor to

maintain constant speed during operation. • Ideal DD(Direct Drive) Brushless Motor supports heavy loads, quiet

(beltless, brushless, and gearless), maintenance free, and delivers high torque at high speeds, smooth rotation.

• Slim and low-profile design (height of 122mm) useful for various applications for example usage in confined areas.

• Highly chemically resistant and durably manufactured. • Convenient universal platform exchange sliding. • Maintenance-free, triple cam system, able to handle heavy loads

with reduced vibration. • To prevent spillage from flasks and tubes the shaker gently starts

up and gently stops. • This unique shaker stops and starts at the always same position.

This shaker is beneficial for semi-automated dosing or sampling of samples.

• A wide range of accessories are available for attachment of any flask or vessel.

• If the load sensor detects any type of imbalance from the shaker it will reduce the shaking motion.

Operating features • Precise Orbital shaking action. • Powerful speed range :

30~500RPM-Vibration free.

Programmable shaking motion

Programming parametersMaximum Number of segments in one (1) pattern (Cycle) 20Maximum Number of Patterns (Cycle) saved 20

Shaking Motion-Forward & Backward, PauseTime 1min to 99hr 59minRPM 10 to 500

• Adopted bright VFD display, and capacitive touch sensor button. • Digital timer : 1min 99hr 59min, delayed ON / OFF.


Model SKC-6075 SKC-6100 SKC-6200 SKC-7075 SKC-7100 SKC-7200Control system FeedbackcontrolPIDDisplay VFD

Shaking system

Motion type OrbitalSpeed range1) (RPM) 30 to 500Accuracy at 100 RPM ±1Amplitude size (mm / inch, dia) 19 / 0.74 25 / 0.98 50 / 1.96 19 / 0.74 25 / 0.98 50 / 1.96

Dimensions

Platform (W×D) (mm / inch)

Small 580×520 / 22.8×20.5 755×520 / 29.7×20.5Large 660×520 / 26.0×20.5 885×520 / 34.8×20.5

Overall (W×D×H) (mm / inch)582.8×618 ×122.2 754.8×662×122.2

22.9×24.3×4.8 29.7×26.1×4.8Net weight (kg / Ibs) 65 / 143.3 75 / 165.4

Electric requirements (230V, 50 / 60Hz) 0.4ACat. No. AAH30105 AAH30115 AAH30125 AAH30205 AAH30215 AAH30225Electric requirements (120V, 50 / 60Hz) 0.8ACat. No. AAH30106 AAH30116 AAH30126 AAH30206 AAH30216 AAH30226

1)Duetohigherspeedrangebetween350rpmand500rpm,werecommendthattheshakersneedextraattachmenttobefixedontheflooroftheworkingplace.


• Select between orbital or reciprocating motion.

• Speed range: 10 to 300 rpm.

• Programmable shaking motion. - Run time: 10 sec to 999 hr 59 min 59 sec. - Forward & Backward, Pause: 10 sec to 59 min 50 sec.

• Maximum orbit size. - 40mm dia. (1.6″ dia.) for SK-300, 600. - 70mm dia. (2.8″ dia.) for SK-71.

• Digital LED display for speed and shaking motion.

Constructional features • Brushless DC motor creates a smooth and quiet uniformed shaking

motion. • To prevent spillage from flasks and tubes the shaker gently starts

up and gently stops. • This unique shaker stops and starts at the always same position.

This shaker is beneficial for semi-automated dosing or sampling of samples.

• Low-profile design useful makes it possible to stack multiple units on one rack.

• Highly chemically resistant and durably manufactured. • Wide range of accessories are available.

SK-300Optional Accessories •Universal/Dedicatedplatforms,Rubber

mats,Universalattachments. see page 97-101 •Flaskclamps,Funnelclamps

•Testtuberacks,Springwireracks •Microplateholders •Labsticker •Stagerack(max.4stages)

Dual-Action ShakersBenchtop platform shakers with advanced dual-shaking features, for flask up to maximum 6L.Performances orbital or reciprocating action and variable-speed control provided gentle to vigorous agitation. Offers user-friendly operating and safety features for reliable shaking of lab glassware.

Shakers


Model SK-300 SK-600 SK-71

Shaking system

Motion type OrbitalorReciprocatingmotionselectableSpeed range (RPM) 10 to 300

Timer Runtime:10secto999hr59min59secForward&Backward,Pause:10secto59min50sec

Amplitude size (mm / inch, dia.) 20,30,40/0.8,1.2,1.6Available-Standard30/1.2 30,40,50,60,70/1.2,1.6,2.0,2.4,2.8 Available - Standard 30 / 1.2

Recip stroke length (mm / inch) 20,30,40/0.8,1.2,1.6Available-Standard30/1.2 30,40,50,60,70/1.2,1.6,2.0,2.4,2.8 Available - Standard 30 / 1.2

Dimensions

Platform (W×D) (mm / inch) 350×350 / 13.8×13.8 450×450 / 17.7×17.7 755×481 / 29.7×18.9

Overall (W×D×H) (mm/inch)410×490×150 / 16.1×19.3×5.9

510×595×150 / 20.1×23.4×5.9

820×610×166 / 32.3×24.0×6.5

Net weight (Kg / lbs) 24.0 / 52.9 29.0 / 63.9 50.0 / 110.2Electrical Requirements (230V, 50 / 60Hz) 0.2A 0.2A 0.2ACat. No. AAH31105K AAH31205K AAH31305KElectrical Requirements (120V, 50 / 60Hz) 0.4A 0.4A 0.4ACat. No. AAH31106U AAH31206U AAH31306U

93

Economic ShakersThe Distinctive and economical SKF models offer the most felicitous shaking motionTwo types of shaking motions (orbital or reciprocating), four types of an orbit or reciprocating lengths. The compact and interchangeable platform design accommodates various types and sizes of vessels and suitable for use in chambers.

Shakers

Operating features • 12 options with different amplitude sizes and shaking motion

(orbital or reciprocating) are available.

• Speed range: selective Max. RPM for each models. - 10 to 500, 450, 400 300, 350, 250 rpm.

• Programmable shaking motion. - Delay On / Off Time: 10 sec to 999 hr 59 min 59 sec. - Forward & Backward, Pause: 10 sec to 59 min 59 sec.

• Max. orbit or reciprocating size. (Factory fixed) - 7, 13, 19 mm dia, [0.3″, 0.5″, 0.75″ dia.] for SKF-2000 series. - 13, 19, 25 mm dia, [0.5″, 0.75″, 1.0 dia.] for SKF-3000 series.


• A large selection of attachments is provided for the use of various vessels and sizes.

- Interchangeable top platforms for flasks, dishes or microplates available separately. (Dual Stacking Tray)


Model SKF-2025 SKF-2050 SKF-2075 SKF-2025R SKF-2050R SKF-2075R

Shaking system

Motion type Orbital Orbital Orbital Reciprocating Reciprocating ReciprocatingSpeed range (RPM) 10 to 500 10 to 400 10 to 300 10 to 450 10 to 350 10 to 250Accuracy at 100 RPM ± 2

Timer DelayOn/OffTime:1minto999hr59min Forward&Backward,Pause:10secto99hr59min

Amplitude size (mm / inch) 7 / 0.3 13 / 0.5 19 / 0.7 7 / 0.3 13 / 0.5 19 / 0.7

DimensionsPlatform (W×D) (mm / inch) 320×260 / 12.6×10.2Exterior (W×D×H) (mm / Inch) 355×375×140 / 14.0×14.8×5.5Net weight (kg / Ibs) 20 / 44.1

Electrical Requirements (230V, 50/60Hz) 0.2 A 0.2 A 0.2 A 0.2 A 0.2 A 0.2 ACat. No. AAH3A105 AAH3A115 AAH3A125 AAH3A205 AAH3A215 AAH3A225Electrical Requirements (120V, 50/60Hz) 0.4 A 0.4 A 0.4 A 0.4 A 0.4 A 0.4 ACat. No. AAH3A106 AAH3A116 AAH3A126 AAH3A206 AAH3A216 AAH3A226

Model SKF-3050 SKF-3075 SKF-3100 SKF-3050R SKF-3075R SKF-3100R

Shaking system

Motion type Orbital Orbital Orbital Reciprocating Reciprocating ReciprocatingSpeed range (RPM) 10 to 400 10 to 300 10 to 300 10 to 350 10 to 250 10 to 250Accuracy at 100 RPM ± 2

Timer DelayOn/OffTime:1minto999hr59min Forward&Backward,Pause:10secto99hr59min

Amplitude size (mm / inch) 13 / 0.5 19 / 0.7 25 / 1.0 13 / 0.5 19 / 0.7 25 / 1.0

DimensionsPlatform (WxD) (mm / inch) 350×350 / 13.8×13.8Exterior (WxDxH) (mm / Inch) 410×490×140 / 16.1×19.3×5.5Net weight (kg / Ibs) 30 / 74.25

Electrical Requirements (230V, 50/60Hz) 0.2 A 0.2 A 0.2 A 0.2 A 0.2 A 0.2 ACat. No. AAH3A305K AAH3A315K AAH3A325K AAH3A405K AAH3A415K AAH3A425KElectrical Requirements (120V, 50/60Hz) 0.4 A 0.4 A 0.4 A 0.4 A 0.4 A 0.4 ACat. No. AAH3A306U AAH3A316U AAH3A326U AAH3A406U AAH3A416U AAH3A426U


• Microprocessor PID controller provides feedback to the motor to maintain constant rpm.

• Suitable at even low speeds for low rpm sensitive experimental tests.

- Speed range : 50 to 300 rpm • One-touch timer facilitative for time-dependent studies. - 1 min to 99 hour 59 min • Orbit size: 13mm dia. [0.51″ dia.]


Constructional features • Brushless DC motor creates a smooth, quiet, and uniformed

shaking motion. • The VFD controller display is quick and easy to view set up speed

and operational speed. • Designed for Portability, constructed with a lightweight plastic

body for facilitative use in experimental chamber. (incubator and etc)

• Removable rubber mat can be used to transport well-pates (Max. 6 ea) and dishes-optional.

• Brushless DC motor creates a smooth, quiet, and uniformed shaking motion.

• Highly chemically resistant and durably manufactured. • Wide range of accessories are available.

CMS-350Optional Accessories •UniversalRubbermats,Universal

attachments. see page 97-101 •Flaskclamps,Funnelclamps

•Testtuberacks,Springwireracks •Microplateholders •Labsticker

Mini ShakersCompact and lightweight design for easy mobility and for use in areas with limited space.The real-time RPM controlling is responsive with the speed control knobIdeal for hybridization, immunocytochemistry, gel staining/destaining, and other bioscience applications.

Shakers


Model CMS-350Control system FeedbackcontrolPIDDesplay VFD

Shaking system

Motion type OrbitalSpeed range (RPM) 50 to 300Accuracy at 100 RPM ±5Timer 1min. to 99hrs. 59min.Orbit size (mm / inch, dia) 13 / 0.51Max. load (kg / Ibs) up to 4 / 8.81

MaterialRubber mat (standard) PP+RubberBody PP

Dimensions

Rubber mat (W×D) (mm /inch) 276×276 / 10.87×10.87Platform (W×D) (mm /inch) 250×250 / 9.8×9.8Overall (W×D×H) (mm /inch) 276×334×130 / 10.9×13.1×5.1Net weight (Kg / lbs) 8 / 17.6

Permissible relative temperature (℃ / ℉) 5~40 / 41~104Electrical Requirements AV100~240V,50/60Hz

Cat. No. KR Plug AAH3B1115KUS Plug AAH3B1115U

95

Adjustable tilt angle and variable digital speed controller provides any possible movement for outstanding rocking or waving results. Removable tray and digital timer can be applied to variety purposes- Ideal for ELISA, enzyme immunoassays, protein synthesis, hybridization staining or

destaining gels, pharmaceutical profiling, and among other laboratory applications.

Operating features • Suitable at even low speed (10rpm) for sensitive experimental tests.

• Digital speed control provides a gentle to vigorous motion. - Rocking shaker: 5 to 100 rpm. - Waving shaker: 8 to 100 rpm.

• User friendly, tilt angle setting can be adjusted to fit user’s exper-imental needs.

- Rocking shaker: Tilt 7 ~ 13° adjustable. - Waving shaker: Tilt 0~ 13° adjustable.

• One-touch timer facilitative for time-dependent studies. - 1 min to 99 hour 59 min.

Constructional features • Brushless DC motor creates a smooth and quiet uniformed

shaking motion.

• The controller display adopts VFD. It is easy to indicate speed set up and operating condition.

• Designed for Portability, constructed with lightweight materials for convenient use in an experiment chamber.

• 3 type of removable trays surface can be used to transport tubes, well-pate and etc.

(Included Dimpled mat, and optional Rubber mat, Universal harness)

CRS-350 / CWS-350Included Accessories •DimpledMatOptional Accessories •RubberMat

see page 97-101 •UniversalHarness


MODEL CRS-350 CWS-350Control system FeedbackcontrolwithPIDDesplay VFD

Shaking system

Motion type Rockingtype Waving TypeSpeed range (RPM) 5 ~ 100 8 ~ 100Accuracy at 100 RPM ±5Tilt angle 7 ~ 13° 0 ~ 13°Max. load (kg / Ibs) 5 / 11.02

MaterialDimpled mat (standard) PP (Polypropylene)+SiliconeBody PP (Polypropylene)

Permissible ambient temperature (℃/℉) 5~60 / 41~140

DimensionTray (W×D) (mm / inch] 276×276×10.87×10.87Overall (W×D×H) (mm / inch) 276×320×150 / 10.87×12.6×5.91Net weight (kg / Ibs) 3.7 / 8.16

Electrical Requirements AV100~240V,50/60Hz

Cat. No.KR Plug AAH391115K AAH381115KUS Plug AAH391115U AAH381115U

Rocking & Waving ShakersShakers


• Vertical reciprocating action.

• Speed range: 50 to 300 rpm.

• Time range: 0~60min / continuos operation.

• Maximum shaking width: 40mm. (1.6″)

• Digital LED speed indicator.

Constructional features • Easy to use, comes in a wide range of rpm setting which covers

most applications.

• Precision of speed control, feedback loop to a digital controller.

• Standard timer range 0-60 minutes, can be overridden upon request.

• End of shaking session unit stops while an audible alarm sounds.

• Easily adjustable holder/maximum of 5 holders per each side. (10 total)

* Funnel capacities (per each side)

Capacity Round type funnel Slim type funnelunder 500ml 3-5 5500ml 3 31L - 3

RS-1 Included Accessories •Funnelholder6sets

(Orderinginformation-Cat.No.:AAA32501)

Separatory Funnel ShakersIntensive vertical reciprocating quick solvent extraction shaking unit.

The separatory funnel shaker is able to shake six samples in identical conditions for any series or comparative protocols in chemistry, biotech, and medical labs.

Shakers


Model RS-1

Shaking system

Motion type Vertical reciprocatingSpeed range (RPM) 50 to 300Timer 60 min or continuous operationVertical stroke length (mm / inch) 40 / 1.6

DimensionsOverall (W×D×H) (mm / inch) 445×730×505 / 17.5×28.7×19.9Max. load per each side (kg / lbs) 3.0 / 6.6Net weight (Kg / lbs) 24.0 / 52.9

Electrical Requirements (230V) 50Hz,0.4A 60Hz,0.4ACat. No. AAH32012K AAH32015K

97

Accessories & Options for ShakersShakers

Universal platforms & Flask clamps, Funnel clamps The universal platforms provide flexibility for mixing different sized assortment of test tubes and glassware on a single platform. Available in

different size assortment of clamps for Erlenmeyer flasks and Separatory funnels.

Description SK-300 SK-600 SK-71 CMS-350 SKF-2000 [R] SKF-3000 [R]Universal platform Cat. No. AAA31501-V1 AAA31502-V1 AAA31503-V1 AAA3B501 AAA3A501 AAA31501-V1

Max. mountable funnel clamps *Cat. No.

Erlenmeyer flask sizeSteel Plastic

AAA23550 AAA30570 for 50mL 36 55 99 16 21 36AAA23551 AAA30571 for 100mL 28 44 74 9 14 28AAA23552 AAA30573 for 250ml 13 24 39 9 8 13AAA23556 AAA30574 for 300mL 13 24 39 9 8 13AAA23553 AAA30575 for 500ml 10 16 25 5 5 10AAA23554 AAA30576 for 1L 5 8 14 4 3 5AAA23555 AAA30577 for 2L 4 5 9 1 - 4AAA23557 - for 2.8L 2 4 6 - - 2AAA23558 - for 4L 1 2 4 - - - AAA23559 - for 6L 1 2 4 - - -

Max. mountable funnel clamps *Cat. No. Separating funnel size

AAA23562 for 250mL 4 6 11 3 4 4AAA23563 for 500ml 3 4 9 2 3 3AAA23564 for 1L 2 3 5 2 2 2AAA23565 for 2L 1 2 4 - - 1

Description SKC-6000 Series SKC-7000 SeriesUniversal platform Cat. No. AAA30501 AAA30503 AAA30502 AAA30504

Dual universal platform Cat. No. - - AAA30541 1) AAA30542 1)

Universal platform size (mm / inch) 580×520 / 22.8×20.5 660×520 / 26.0×20.5 755×520 / 29.7×20.5 885×520 / 34.8×20.5Cat. No.

Erlenmeyer flask sizeSteel Plastic

AAA23550 AAA30570 for 50mL 84 96 108 (under 108) 126 (under 126)AAA23551 AAA30571 for 100mL 54 66 72 (under 72) 84 (under 84)AAA23552 AAA30573 for 250ml 33 39 42 (under 42) 51(under 51)AAA23556 AAA30574 for 300mL 28 32 36 40AAA23553 AAA30575 for 500ml 20 24 27 30AAA23554 AAA30576 for 1L 14 16 18 20AAA23555 AAA30577 for 2L 8 11 12 13AAA23557 - for 2.8L 6 7 9 11AAA23558 - for 4L 4 6 8 9AAA23559 - for 6L 3 4 6 7

Max. mountable funnel clamps *Cat. No. Separating funnel size

AAA23562 for 250mL 14 16 18 20AAA23563 for 500ml 9 10 11 14AAA23564 for 1L 7 8 9 12AAA23565 for 2L 5 6 7 8

* Flask clamps and funnel clamps for universal platform are sold separately.1)Universalplatformattachmentsaremountedonthedualuniversalplatform,Underthedualuniversalplatformaremountedonly50ml,100ml200ml-Refertotheabovechart.(Distancebetween

platforms is 175mm)

Universal Platforms Flask Clamps Funnel Clamps

98


Spring wire racks Ideal for holding a wide variety of tubes, flasks, and other glassware. All component are made of stainless steel.

Description SK-300 SK-600 SK-71 CMS-350 SKF-2000 [R] SKF-3000 [R]Spring wire racks Cat. No. AAA31521 AAA31522 AAA31523 AAA3B511 AAA3A521 AAA31521-V1


for 50mL 16 25 40 12 12 16for 100mL 9 16 28 6 6 9for 250ml 4 9 15 3 3 4for 300mL 4 9 15 3 3 4for 500ml 4 5 10 3 3 4

for 1L 2 4 8 2 2 2for 2L 1 2 4 - - 1

for 2.8L 1 2 4 - - 1

Description SKC-6000 Series SKC-7000 SeriesSpring wire racks Cat. No. AAA30521 AAA30522 AAA30523 AAA30524


for 50mL 30 35 45 50for 100mL 20 24 28 32for 250ml 12 15 18 21for 300mL 12 15 18 21for 500ml 9 12 15 18

for 1L 6 8 10 12for 2L 4 5 6 7

for 2.8L 3 3 4 5

Universal Platforms (for SKC)

Spring wire racks (for SKC)

Dual Universal Platforms (for SKC)

Spring wire rack (for SKF)

99


Universal attachments (for SKC)

Test Tube Racks

Dimpled mats (for CRS / CWS)

Universal attachments (Utility carriers) Several adjustable clamping bars to quickly secure a variety of glassware or tubes on non-skid rubber mat. Suitable for different sizes of flat

bottomed flasks.

Models SK-300 SK-600 SK-71 CMS-350 SKF-2000 [R] SKF-3000 [R] SKC-6000 Series SKC-7000 SeriesCat. No. AAA31511 AAA31512 AAA31513 AAA3B521 AAA3A511 AAA31511 AAA30511 AAA30512 AAA30513 AAA30514

Test tube racks Highly durable stainless steel racks with adjustable angle and tube height support. Simply release and mount racks. Requires an universal

platform which are sold separately.

Cat. No. Description Mountable capacity of racks*AAA23581 for 86 test tubes 8mm dia. (0.3”)

AAA23582 for 86 test tubes 10mm dia. (0.4”)






* No declination※Wecanmanufactureothersizeoftesttuberackstomeetyourspecificrequirements.Contactusfordetails.

Dimpled Mat

Models SKF-2000 [R]Cat. No. AAA3A532

SK-300 SK-600 SK-71 CMS-350 SKF-2000[R],3000[R]Series SKC-6000 Series SKC-7000 Series2EA 4EA 6EA 2EA 2EA 8EA 9EA 9EA 12EA

100


Dedicated platforms If using a single flask size only, the dedicated platforms provide maximum capacity, and come with clamps installed. Provided standard clamp

size are 250mL and 500mL, but possibly provide the other size of clamps also.

Cat. No. DescriptionAAA31551 AnuniversalplatformforSK-300,SKF-3000serieswith250mLflaskclamps13ea

AAA31552 AnuniversalplatformforSK-300,SKF-3000serieswith500mLflaskclamps10ea

AAA31561 AnuniversalplatformforSK-600with250mLflaskclamps24ea

AAA31562 AnuniversalplatformforSK-600with500mLflaskclamps16eaAAA23631 AnuniversalplatformforSK-71with250mLflaskclamps39eaAAA23632 AnuniversalplatformforSK-71with500mLflaskclamps25eaAAA23611 AnuniversalplatformforSI-300serieswith250mLflaskclamps13eaAAA23612 AnuniversalplatformforSI-300serieswith500mLflaskclamps9eaAAA23621 AnuniversalplatformforSI-600serieswith250mLflaskclamps18eaAAA23622 AnuniversalplatformforSI-600serieswith500mLflaskclamps13eaAAA23631 AnuniversalplatformforIS-971serieswith250mLflaskclamps39eaAAA23632 AnuniversalplatformforIS-971serieswith500mLflaskclamps25ea

*Adedicatedplatformissoldwithsettingeachmax.mountableamountofflaskclampson.

Rubber mats The non-skid rubber mats are designed for low-speed applications, allow for quick addition or removal of flasks, plates or tubes.

Models SK-300 SK-600 SK-71 CMS-350 SKF-2000 [R] SKF-3000 [R] SKC-6000 Series SKC-7000 SeriesCat. No. AAA31531 AAA31532 AAA23533 AAA38501 AAA3A531 AAA31531 AAA30531 AAA30532 AAA30533 AAA30534

Plastic Clamps Dedicated Platform

Rubber mats (for SKC)

101


Microplate holders Available in three styles. A Tower type holder, two Flat types (small and large) and a Single type. The large flat holders will hold 4 standard or deep

well plates. The small flat holders will hold 3 standard or deep well plates. The single holders will hold only 1 standard or deep well plate.

Microplate holders Tower type Flat-A type (large) Flat-B type (small) Single typeCat. No. AAA23651 AAA23652 AAA23653 AAA23654

Max. mountable holdersSK-300 6 - 2 8SK-600 10 2 3 15SK-71 16 3 5 25

CMS-350 6 - - 6SKF-2000 (R) 4 - 1 6SKF-3000 (R) 6 - 2 8

SKC-6000 SeriesAAA30501 16 3 4 20AAA30503 19 4 5 23

SKC-7000 SeriesAAA30502 22 5 6 25AAA30504 25 6 7 28

*Microplateholdersneedtobemountedonanuniversalplatformwhichissoldseparately.

Dual stacking tray for Microplate

Models CMS-350 SKF-2000 [R]Cat. No. AAA3B531 AAA3A541

Dual stacking tray size 319×285×96 / 12.6×11.2×3.8

319×285×96(105) / 12.6×11.2×3.8

Max. mountable Microplate

Total 12EA(each try for 6EA)

Total 12EA(each try -6EA)

Lab Sticker Alternative to flask clamps for securing vessels to a shaker platform the ideal way to secure containers such as bottles and dishes on the universal

platform is that cannot be held with conventional flask clamps. The lab sticker can be re-generated to a new condition by washing it with mild detergent and water. It cannot be used in water baths. For safe operation, suggest increasing the RPM gradually.

Description Lab StickerLab Sticker Cat. No. AAA30551Size (mm / inch, W×D×H) 200×200×5 / 7.9×7.9×0.2

*LabStickerneedtobemountedonanuniversalplatformwhichissoldseparately.

Large tray for Microplate

Models CMS-350 SKF-2000 [R]Cat. No. AAA3B532 AAA3A542

Tray size 396×273×21 / 15.6×10.7×0.8

396×273×21 / 15.6×10.7×0.8

Max. mountable Microplate Total 9EA Total 9EA

Dual stacking tray for microplate Microplate Holders Lab Sticker

Magnetic Stirrers - Scale & Digital Type.Magnetic Stirrers - Multi Position Type.Overhead Stirrers - Economic, Analog & DigitalVortex Mixer.

Stirrers & Vortex Mixer

Selection GuideMagnetic Stirrers

Description Speed Range[RPM]

Stirring Capacity, Max. [L, H2O]

Positions Page

Scale TypeMS-12B

150 ~ 2,5002 -

104

MS-17B 4 -MS-22B 5 -

Digital TypeMS-17G

30 ~ 2,000

4 -MS-22G 5 -

Multi-Position

MS-23M 1.5* 6MS-32M 1.5* 6MS-33M 2.25* 9MS-51M 1.25* 5MS-52M 2.5* 10MS-53M 3.75* 15

* Erlenmeyer flask : Usable under 250㎖ in case full positions.

Overhead StirrersDescription Speed Range

[RPM]Stirring Capacity,

Max. [L, H2O]Page

Economic TypeMSE-1 UP to 1,400 20

106

MSE-2 UP to 1,200 30MSE-3 UP to 900 50

Analog TypeMSM-1 50 ~ 1,400 20MSM-2 50 ~ 1,200 30MSM-3 50 ~ 900 50

Digital TypeMSP-1 50 ~ 1,400 20

107MSP-2 50 ~ 1,200 30MSP-3 50 ~ 900 50

Vortex MixerDescription Speed Range

[RPM]Orbit Size[mm/inch, Ø] Operating Mode Page

Basic type 0 ~ 3,000 4 / 0.16 Touch, Continous, High-Continous

108Economic type 0 ~ 3,000 4 / 0.16 Touch, Continous


for Magnetic Stirrer 109for Overhead Stirrer 110for Vortex Mixer 109

General ApplicationsStirrersFacilitating Crystallization, Evaporating Solvents, Chemical Reactions, Titration, Distillation Procedures, Suspensions, Dissolving Media, Food products.

Overhead stirrerBeverage production, Dairy products, Food, Sugar & Candy production, Chemistry / Petrochemistry, Ceramics, Water treatment, Cosmetic, Colorant/Paint production and Paper manufacture etc.

Vortex mixer Enzymatic and RIA assays · General test tube mixing, Biochemical assays, Vortexing cell suspensions, Mixing tissue samples, Viral dilutions preparations, Precipitated Assays.

Magnetic Stirrers (MS-B/G/M types)

- Easy to use, broad rpm speed range covers most applications.

- Microprocessor PID controls. (only MS-G/M types)

- Speed can be controlled regardless of the weight of the experimental sample.

- Magnetic stirrer rapidly works in real-time according to the RPM and safety. (MS-B type)

- Controls are even safer when the magnetic stirrer is used in low speed rotation.

- Powerful magnets and motor guarantee a high-speed and a proper management of the device.

- BLDC is less noisy and more durable than regular DC motors.

Overhead Stirrers (MSE/MSM/MSP types)

- Broad range of rpm speeds, high viscosity, and powerful torque covers various applications.

- PID feedback control system controls and main-tains constant motor speed under conditions of changing viscosity. (MSM / MSP types)

- Bright and recognizable FND display. (MSM / MSP types)

- Compact and slim head design takes up minimal space therefore comfortable to use.

- Aluminum main body sturdy and efficiently absorbs the heat generated by the motor.

Vortex Mixer (VM-96B/96E)

- In less than 4 second a vortex is made with amplitude of rotation.

: 4mm and rate of rotation : 0 ~ 3,000rpm (B type) 200~3000rpm (E type)

- Offered easy converter mode between touch and continuous.

- High sensitive touch switch mode used to reduce wrist stress when the user is pushing and holding their test samples.

- Functional BLDC motor offers accurate control of speed.

- Low center of gravity design minimizes vibration and sliding movement caused by high rpm speed.

Technical Benefits

104

Magnetic Stirrers - Scale & Digital & Multi-position TypeStrirrers & Vortex Mixer

Constructional Features • Ergonomic design, lightweight, simple to use and efficient low

profile structure.

• 120mm (MS-12B), 170mm, and 220mm / included top plate provided.

• The white & black silicone plate cover (Only MS-B, G types) and the non-slip strength of the rubber feet prevent the sample from sliding.

• BLDC is less noisy and more durable than regular DC motors.

• Best-in-the-class with broad range of RPM speed is reliable.

• Built in thermal shutdown and current limit protection.

Additional MS-G Type Features • Microprocessor PID controls.

• Convenient program and timer modes.

• Bright and vivid VFD display and responsive touch screen buttons.

• Gradual start-up prevents users from splashing of samples.

• Included M12 rod holder for clamping in samples.

Multi-position Type Features • User friendly and timer mode allows the user to select from one

point in one row, or one point in one column, one row, one column, or multiple rows or columns, with different rpm and timer settings.

• Easy to read digital VFD control display and beautifully illuminate LED single position, multiple position, row position, & column position lighting.

• Non-slip see through silicon place mat. (optional)

• Uncompromising safety devices.

• Supported various number of multi position stirring to meet user demands.

• #304 grade stainless steel and chemical resistant top-plate.

105

Magnetic Stirrers - Scale & Digital & Multi-position TypeStrirrers & Vortex Mixer


Model MS-12B MS-17B MS-22B

Technical data

Speed control Electronic speed controlStirring Capacity (Liter, H2O) 2 4 5Speed range (RPM) 150 ~ 2,500Speed display NoneMotor rating input / output (W) 2.9 / 1.6Magnetic bar (Ø×L, mm / Inch), Max. 8×30 / 0.31×1.18 8×40 / 0.31×1.57 10×50 / 0.39×1.97Load, Max (kg / lbs) 15 / 33.07 20 / 44.09 25 / 55.12

Top plateMaterial Poly propylene with non-slip silicon coverDimension (mm / inch, Ø) 120 / 4.72 170 / 6.69 220 / 8.66

General data

Body material Poly propylene

Dimension (mm / inch, W×D×H)130×130×65 / 5.12×5.12×2.56

185 ×185×65 / 7.28×7.28×2.56

230×230×65 / 9.06×9.06×2.56

Weight (kg / lbs) 0.6 / 1.32 0.9 / 1.98 1.1 / 2.43Electrical requirements AC 100 ~ 240V, 50 / 60Hz (only MS-12B, 17B with power adapter)

Power consumption (W) 5 6Protection class (DIN EN 60529) IP42

Cat. No.Persian blue

KR plug AAH330115BK AAH330215BK AAH330315BKUS plug AAH330115BU AAH330215BU AAH330315BU

YellowKR plug AAH330115YK AAH330215YK AAH330315YKUS plug AAH330115YU AAH330215YU AAH330315YU


Model MS-17G MS-22G

Technical data

Speed control Feedback control with PIDStirring Capacity (Liter, H2O) 4 5Speed range (RPM) 30 ~ 2,000Speed display VFDMotor rating input / output (W) 2.9 / 1.6Magnetic bar (Ø×L, mm / Inch), Max. 8×40 / 0.31×1.57 10×50 / 0.39×1.97Load, Max (kg / lbs) 20 / 44.09 25 / 55.12

Top plateMaterial Poly propylene with non-slip silicon coverDimension (mm / inch, Ø) 170 / 6.69 220 / 8.66

General data

Body material Poly propylene

Dimension (mm / inch, W×D×H)210×280×72 / 8.27×11.02×2.82

260×360×72 / 10.24×14.17×2.82

Weight (kg / lbs) 1.35 / 2.98 1.75 / 3.86Electrical requirements AC 100 ~ 240V, 50 / 60Hz Power consumption (W) 6Protection class (DIN EN 60529) IP42

Cat. No.Persian blue

KR plug AAH331215BK AAH331515BKUS plug AAH331215BU AAH331515BU

YellowKR plug AAH331215YK AAH331515YKUS plug AAH331215YU AAH331515YU


Model MS-23M MS-32M MS-33M MS-51M MS-52M MS-53M

Technical data

Speed control Feedback control with PID

StirringPositions 6 6 6 5 10 15Speed range (RPM) 30 ~ 2,000

Stirring point distance (mm / inch, W×D)

118×170 / 4.64×6.69

115×90 / 4.52×3.54

117×90 / 4.6×3.54 90 / 3.54 117×90 / 4.6×3.54

Timer 1 min. to 99 hours 59 min.Speed display VFDMotor rating input / output (W) 2.9 / 1.6Load, Max (kg / lbs) 30 / 66.14

General data

Dimension(mm / inch, W×D×H)

377×434×81 / 14.84×17.09×3.19

254×434×81 / 10×17.09×3.19

377×434×81 / 14.84×17.09×3.19

130×591×75 / 5.12×23.27×2.95

251×591×75 /9.88×23.27×2.95

378×591×75 /14.89×23.27×2.95

Weight (kg / lbs) 6 / 13.23 5 / 11.02 7 / 15.43 4 / 8.82 8 / 17.64 11 / 24.25Electrical requirements AC 100 ~ 240V, 50 / 60HzPower consumption (W) 45 45 54 45 85 135Protection class (DIN EN 60529) IP 21

Cat. No.KR plug AAH332115K AAH332215K AAH332315K AAH332415K AAH332515K AAH332615KUS plug AAH332115U AAH332215U AAH332315U AAH332415U AAH332515U AAH332615U

106 Constructional Features

• Compact and slim head design. • Powerful torque easy use with high viscosity samples. • Overload and thermal protection for safe operation. - MSM model: sequenced-visible and audible alarms and stop

systems. • Speed adjustment dial knob. • With high speed, vibration free, and silent, during operation. • Various accessories available.

Additional MSM Type Features • Well illuminated digital display panel with sensitive touch buttons. • Convenient emergency stop. • Recognizable display modes : rpm, ratio%


Model MSE-1 MSE-2 MSE-3 MSM-1 MSM-2 MSM-3

Technical Data

Speed control Scale AnalogSpeed range (rpm) Up to 1,400 Up to 1,200 Up to 900 50 ~ 1,400 50 ~ 1,200 50 ~ 900Display None DigitalStirring capacity (L, H2O) 20 30 50 20 30 50Torque, max. (N·cm) 15 27 53 15 27 53Power max. (W / A) 15 / 1.2 20.4 / 1.7 31.2 / 2.6 15 / 1.2 20.4 / 1.7 31.2 / 2.6

General Data

Body material Aluminum + PP

Dimensions (mm / inch, W×D×H)65×135×190 /2.56×5.31×7.48

70×150×200 /2.76×5.91×7.87

70×150×215 /2.76×5.91×8.46

65×135×190 /2.56×5.31×7.48

70×150×200 /2.76×5.91×7.87

70×150×215 /2.76×5.91×8.46

Net weight (Kg / lbs) 2 / 4.41 2.5 / 5.51 3 / 6.61 2 / 4.41 2.5 / 5.51 3 / 6.61Electrical requirements AC 100 ~ 240V, 50/60HzSafety device Thermal protection, Current protection, Emergency stop [MSM] Shaft die, max (mm / Inch) 3 ~ 10 / 0.12 ~ 0.39Protection class (DIN EN 60529) IP10

Cat. No.KR plug AAH372115K AAH372215K AAH372315K AAH370115K AAH370215K AAH370315KUS plug AAH372115U AAH372215U AAH372315U AAH370115U AAH370215U AAH370315U

※ Permissible environment condition : Temperature +5℃ ~ 40℃, Relative humidity up to 80%.※ Protection class according to DIN EN 60529 : Waterproof, Dust production index based on the test level.※ Above spec can be changed without prior notice.

Overhead Stirrer - Economic & Analog type

High dynamic stirring, simple operating, and sustainable economic benefits - for tasks of up to 50 liters [H2O]

Aluminum main body sturdy and efficiently absorbs the heat generated by the motor.

MSE types MSM types

Strirrers & Vortex Mixer

107

Overhead Stirrer - Digital type

Constructional Features • Compact and slim head design.

• Smooth start up and speed-down functions which prevent spills and splashing, controlled with a microprocessor

• PID feedback control system controls and maintains constant motor speed under conditions of changing viscosity.

• Powerful torque easy use with high viscosity samples.

• Aluminum main body sturdy and efficiently absorbs the heat generated by the motor.

• Well illuminated digital display panel with sensitive touch buttons.

• Selectable display modes: rpm, ratio%, motor temp, and run time.

• Convenient emergency stop.

• Recognizable overload and thermal protection for safe operation : sequenced-visible and audible alarms and stop systems.

• Speed adjustment dial knob.

• With high speed, vibration free, and silent, during operation.

• USB port comes standard. (Lab Companion exclusive software for control and data collection)

• Various accessories available.

Designed for optimum usability, strongest efficiency in the same class, and advanced safety system for protecting the user and laboratory environment.


Model MSP-1 MSP-2 MSP-3

Technical Data

Speed control PID feedback controlSpeed range (rpm) 50 ~ 1,400 50 ~ 1,200 50 ~ 900Display DigitalStirring capacity, max. (L, H2O) 20 30 50Torque, max. (N·cm) 15 27 53Power max. (W / A) 15 / 1.2 20.4 / 1.7 31.2 / 2.6

General Data

Body material Aluminum + PP

Dimensions (mm / inch, W×D×H)65×135×190 /2.56×5.31×7.48

70×150×200 /2.76×5.91×7.87

70×150×215 /2.76×5.91×8.46

Net weight (Kg / lbs) 2 / 4.41 2.5 / 5.51 3 / 6.61Electrical requirements AC 100 ~ 240V, 50 / 60HzSafety device Thermal protection, Current protection, Emergency stop, Automatic speed-down (MSP)

Shaft die, max (mm / Inch) 3 ~ 10 / 0.12 ~ 0.39Protection class (DIN EN 60529) IP10

Cat. No.KR plug AAH371115K AAH371215K AAH37131KUS plug AAH371115U AAH371215U AAH37131U

※ Permissible environment condition : Temperature +5℃ ~ 40℃, Relative humidity up to 80%.※ Protection class according to DIN EN 60529 : Waterproof, Dust production index based on the test level. ※ Above spec can be changed without prior notice.

MSP types


108

Vortex Mixer

Constructional Features • Well-balanced and designed vortex mixer, with optimized safety

functions.

• Low-profile vortex mixer, with small footprint for used in lab benches, fume hoods, and clean benches.

• Touch sensitive switch offers real-time mixing. (B-type)

• Variable speed control knob, with different modes of mixing, and LED lighting to let the user which mode of mixing the vortex mixer is in. (B-type)

• Non spark BLDC motor safe, quick acceleration, and low mainte-nance.

• Built in safety device from overload and over current.

• Chemically resistant, PP (polypropylene) molded exterior.

• A wide range of accessories available. (VMS0011 accessories come standard)



Model VM-96B VM-96E

Technical Data

Motion OrbitalSpeed range (rpm) 0 - 3,000 200 - 3,000Display Analog NoneControl ScaleOrbit (mm / inch, Ø) 4 / 0.16Operating mode Touch, Continuous, High-continuous Touch, ContinuousMotor rating input / output (W) 12W / 6WMotor BLDC motorMax. load (kg / lbs) - incl. attachment 0.5 / 1.1

General Data

MaterialBody PolypropylenePlatform Silicone rubber

Dimension (mm / inch, W×D×H) 154×210×83 / 6.06×8.27×3.27 148×159×87 / 5.83×7.44×3.43Net weight (kg / lbs) 3.5 / 7.72 2.6 / 5.73Electrical requirements AC 100V ~ 240V, 50 / 60HzSafety Device Self-resetting / Current limit protection Current limit protectionProtection class (DIN EN 60529) IP 42

Cat. No.KR Plug AAH360115K

Parsian blue AAH361115BKYellow AAH361115YK

US Plug AAH360115UParsian blue AAH361115BUYellow AAH361115YU

※ Permissible environment condition : Temperature +5℃ ~ 40℃, Relative humidity up to 80%※ Protection class according to DIN EN 60529 : Waterproof, Dust production index based on the test level.

Intelligent 3 style operating modes allow user to select Touch, Continuous, High-continuous selective functions. - (VM-96B)

Easy converter operating mixer is designed for noiseless and powerful mixing that requires real-time control. (VM-96E)

109

Accessories & Options for Stirrers and Vortex Mixer

Egg Type Octagon Type

Plastic Retrievers(PE)

Polygon Type

Plastic Retrievers(teflon)


for Magnetic Stirrer

Cat. No. Description mmMTT0001 Power Adapter for MS-12B & MS-17B 100 ~ 240V, 50 / 60HzMTT0002 Plate Cover (White, Silicone) for MS-12B Ø120MTT0003 Plate Cover (White, Silicone) for MS-17B/G Ø170MTT0004 Plate Cover (White, Silicone) for MS-22B/G Ø220MTT0005 Plate Cover (Black, Silicone) for MS-12B Ø120MTT0006 Plate Cover (Black, Silicone) for MS-17B/G Ø170MTT0007 Plate Cover (Black, Silicone) for MS-22B/G Ø220MTS0015 Silicone Plate for MS-53M 355×310MTS0016 Silicone Plate for MS-52M 235×310MTS0017 Silicone Plate for MS-51M 115×475MTS0041 Silicone Plate for MS-23M / 32M 355×310MTS0042 Silicone Plate for MS-33M 235×310MTT0008 Magnetic Stirring Bar (Octagon type) 12.7×8MTT0009 Magnetic Stirring Bar (Octagon type) 16.0×8MTT0010 Magnetic Stirring Bar (Octagon type) 22.0×8MTT0011 Magnetic Stirring Bar (Octagon type) 25.4×8MTT0012 Magnetic Stirring Bar (Octagon type) 28.6×8MTT0013 Magnetic Stirring Bar (Octagon type) 38.0×8

Cat. No. Description mmMTT0014 Magnetic Stirring Bar (Octagon type) 50.8×9.5MTT0015 Magnetic Stirring Bar (Polygon type) 15×5MTT0016 Magnetic Stirring Bar (Polygon type) 20×5MTT0017 Magnetic Stirring Bar (Polygon type) 25×5MTT0018 Magnetic Stirring Bar (Polygon type) 30×5MTT0019 Magnetic Stirring Bar (Polygon type) 40×5MTT0020 Magnetic Stirring Bar (Polygon type) 50×5MTT0021 Magnetic Stirring Bar (Egg type, 50ml Round flask) 16.0MTT0022 Magnetic Stirring Bar (Egg type, 10, 25, 50, 100ml Round flask) 19.0MTT0023 Magnetic Stirring Bar (Egg type, 100, 200ml Round flask) 25.4MTT0024 Magnetic Stirring Bar (Egg type, 300, 500ml Round flask) 31.8MTT0025 Magnetic Stirring Bar (Egg type, 500, 1000ml Round flask) 41.28MTT0026 Plastic Retrievers (PE) 300MTT0027 Plastic Retrievers (PE) 500MTT0028 Plastic Retrievers (Yellow, Teflon) 510MTT0029 Plastic Retrievers (Blue, Teflon) 510

for Vortex MixerCat. No. DescriptionVMS0008 Micro plate Tray

VMS0011 Rubber Platform

AAA36520 Tube Holder with Insert Retainer

AAA36521 Tube Holder with Insert Retainer (Ø10mm)





AAA36522

AAA36523VMS0008AAA36520

AAA36521

VMS0011

110

Accessories & Options for Overhead Stirrers

for Overhead Stirrers Impeller

Propeller Impeller

- Standard grade stainless steel with Teflon shaft produces an axial flow stir between the bottom and top levels of a sample with local shearing force. Used at medium or high speeds for mixing normal range level vis-cosity samples.

Radial Flow Impeller

- A radial flowing stir from the top and bottom levels of a sample with a powerful, high shearing turbulent force. Used ideally for the gassing of liquids and mixing medium to high range level vis-cosity samples.

Blade and Half-Moon Impeller

- Tiltable moon-shaped and bl-ade shaft produces a normal axial flow percentage mixing of samples. Used with round bo-ttom shaped containers, medium mixing speed, and samples ranging from low to medium viscosity levels.

Anchor and Paddle Impeller

- An anchored shaft that pro-duces a strong tangential flow with a high shearing percentage force on samples with medium to high viscosity level with speed setting in the low to medium range.

PTFE Impeller

Propeller Impeller Radial Flow Impeller Blade and Half-Moon Impeller Anchor and Paddle Impeller


Cat. No. DescriptionAAA37521 Propeller (50mm 3-Bladed, 8mm Shaft, 400mm Length)

AAA37522 Propeller (70mm 3-Bladed, 8mm Shaft, 400mm Length)





AAA37541 Half-Moon (65/20mm , 8mm Shaft, 300mm Length)

AAA37542 Half-Moon (90/25mm , 8mm Shaft, 500mm Length)

BEA0570031 Dissolver (55mm, 8mm Shaft, 350mm Length)

BEA0570032 Dissolver (75mm, 8mm Shaft, 350mm Length)

AAA37551 Centrifugal (50/15mm, 8mm Shaft, 500mm Length)

AAA37552 Centrifugal (80/15mm, 8mm Shaft, 500mm Length)

AAA37561 Turbine (40mm, 8mm Shaft, 500mm Length)

Cat. No. DescriptionAAA37562 Turbine (70mm, 8mm Shaft, 500mm Length)

AAA37571 Anchor (45×45mm, 8mm Shaft, 300mm Length)

AAA37572 Anchor (60×60mm, 8mm Shaft, 500mm Length)

AAA37581 Paddle A (70×70mm, 8mm Shaft, 500mm Length)

BEA0570081 PTFE Propeller (50mm 4-Bladed, 8mm Shaft, 500mm Length)

BEA0570082 PTFE Propeller (70mm 4-Bladed, 8mm Shaft, 500mm Length)

BEA0570091 PTFE Half-Moon (60 / 18mm , 8mm Shaft, 500mm Length)

BEA0570101 PTFE Centrifugal (76 / 17mm, 8mm Shaft, 500mm Length)

BEA0570111 PTFE Anchor (80×50×5mm, 8mm Shaft, 500mm Length)

BEA0570121 PTFE Anchor (80×40mm, 8mm Shaft, 500mm Length)

BEA0570131 PTFE Turbine (70mm, 8mm Shaft, 500mm Length)

BEA0570141 PTFE Paddle (70mm, 8mm Shaft, 500mm Length)

BEA0570151 PTFE Paddle A (78×80mm, 8mm Shaft, 500mm Length)

111

Accessories & Options for Overhead Stirrers

for Overhead Stirrers

Clamp Holder Utility Clamp 3 Prong

Fixing Clamp Flexible Coupling

Utility Clamp Plat (2P)

3 Prong Clamp 2 Prong Clamp

PTFE Stirring seals

Clamp

Prong Clamp, Fixing Clamp, Flexible Coupling

PTFE Stirring seals

DS-01 Dial Stand

BS-03 Basic Stand BS-02 Basic Stand


Cat. No. DescriptionAAA37501 DS-01 Dial Stand (W×D×H, 400×400×700)

AAA37502 BS-01 Basic Stand (W×D×H, 400×400×700)



MSS0051 SU-15 15Ø support, 500mm, M14 Nut



BEA0570161 PTFE Stirring seals (24 / 40)




BEA0570171 Clamp Holder

BEA1000001 Utility Clamp 3 Prong

BEA1000002 Utility Clamp Plat (2P)

BEA1000011 3 Prong Clamp (80mm grip)




BEA0570181 Fixing Clamp

BEA0570191 Flexible Coupling

Environmental ChambersTemperature & Humidity Chambers. Temperature & Humidity Chambers - Tabletop type.Fingerprint Development Chamber - Tabletop type.Temperature Chambers.

Temperature Chambers - Tabletop type.Clean Temperature & Humidity Chambers. Plant Growth Chambers.

Selection GuideTemperature (& Humidity) Chambers

Description Operating Temp. Range 1) (℃/℉)

Operating Humid. Full Range 2) (%RH)

Chamber Volume (L / cu ft)

Page

Temperature & Humidity Chamber (Floor type)

TH-G Series -35 to 150 / -31 to 302

25 to 98 180 to 1500 / 6.4 to 53.0114 - 120TH-I Series 20 to 98 180 to 408 / 6.4 to 14.4

TH-GU-300 -60 to 150 / -76 to 302 25 to 98 300 / 10.6TH-TG Series -5 to 100 10 to 95 190 to 1500 / 6.7 to 53.0

123 - 127TH-ICH 3) Series -5 to 85 20 to 85 300, 760 / 10.6, 26.8

Temperature & Humidity Chamber (Tabletop type)

TH-KE Series -35~150 / -31~302 20 to 9525 to 100 / 0.9 to 3.53 128 - 134TH-ME Series -20 to 150 / -4 to 248 30 to 95

TH-PE Series 0 to 120 / 32 to 248 35 to 95TH-PF-100 4) 40 to 100 / 104 to 212 50 to 90 100 / 3.53 137 - 139

TemperatureChamber (Floor type)

TC-G Series -35 to 150 / -31 to 302 - 180 to 1500 / 6.4 to 53.0121 - 122

TC-GU-300 -60 to 150 / -76 to 302 - 300 / 10.6TemperatureChamber (Tabletop type)

TC-KE Series -40~150 / -40~302 -25 to 100 / 0.9 to 3.53 135 - 136

TC-ME Series -20 to 120 / -4 to 248 -

Clean Temperature& Humidity Chamber (Floor type)

TH-CR-270 -35 to 100 / -31 to 212 30 to 90 270 / 9.5 140 - 143

1) Operating Temperature Ranges obtained with using humidity.2) Please, refer to the specification details in the catalog.3) TH-ICH Series Temperature Ranges obtained w/o using light or humidity.4) Fingerprint development chamber.

Plant Growth Chambers

Description Operating Temp. Range 1) (℃/℉)

Operating Humid. Full Range (%RH)

Chamber Volume (L / cu ft)

Page

Plant Growth Chambers(Floor type)

GC-300TL 5 to 50 / 41 to 122- Lamp off10 to 50 / 50 to 122- Lamp on

- 300 / 10.6

146 - 148GC-300TLH50 to 90 300 / 10.6

1000 / 35.3GC-1000TLH


for Temperature & Humidity Chambers 144for Plant Growth Chambers 149

General Applications

Safety functions1) Self-protecting cut-off function : - Over temperature, electrical leakage or overvo-

ltage automatically cuts the power from the unit, in an orderly fashion, starting with the heating element then the controller unit.

2) Time setting function for automated run / off : - Enable automatic start and shut off of a unit at

any specific time. - A timer can be set for a month and data can be

recorded in time, day, or week intervals.

3) Low fluid level protection water leakage alarm : - Intermittent toned alarm audible alarm and

visual alarms. - Water supply and circuit compartment separate

from each other to ensure safety.

4) Door-open warning alarm : - Intermittent toned alarm audible alarm and

visual alarms. - Heating element, fan, and platform automatically

stops when the door is opened to minimize heat loss and to ensure users safety.

Optimum control performance1) Microprocess PID control / Auto-tuning /

Calibration.

2) Optimize CPU logic control system. - Optimum control of temperature / humidity

with economical controls that reduces power consumption.

3) Touch screen type display. - 5.7-inch Color LCD display with interactive input

system. (only floor type) - Temperature & humidity / timer settings, and

operation condition. - Temperature, humidity, and other operating

parameters can be recorded using a chart recorder.

- Easily visible set value : set point (SP) / present value (PV) are also added on the colorful LCD controller.

Protect the global environment - Use of HFC refrigerant prevents damage to the

ozone layer. - Complies with the Montreal Protocol on Sub-

stances That Deplete the Ozone Layer control measures.

Temperature (& Humidity) ChambersTest for reliability, durability, climatic, freezing res-istance, quality assurance, thermal endurance etc. - Testing for electric and electronic component,

sensors. - Testing for semiconductor, PCB, LCD & LED. - Pharmaceutical tests. - Mechanical / Military / Aircraft engineering. - Automobile, Transport / automobile supply

industries. - Chemical / Petrochemical industries. - Construction materials / Plastic / Textile industries. - Testing mould, liquor, cigar, paintings. - Testing metal related industries like plating etc. - Ninhydrin, DFO and other fingerprint develo-

pment processes. (Only TH-PF-100)

Plant Growth Chamber - Agriculture experiment with growth of plants. - Growth experiment of animals and insects. - Food preservation experiments. - Genetic of life science researches. - Genetic researches and pathology of plants. - Retardation researches of seeds. - Tissue culture of plants and germinating

researches of seeds.

Technical Benefits

114

Temperature (& Humidity) Chambers

TH-G / TH-I / TC-G series


Floor type

Certification only for the TH-G-180·300·408

Certification only for the TC-G-180·300·408

115


Dimensions(TH-G / TH-I / TC-G series)

Models Capacity W D H A BTH-GTH-ITC-G

180L (6.4cu ft) 1025mm (40.4”) 1035mm (40.7”) 1530mm (60.2”) 450mm (17.7”) 1230mm (48.4”)



TH-GTC-G



1500L (53.0 cu ft) 1570mm (61.8”) 2045mm (80.5”) 2050mm (80.7”) 560mm (22.0”) 800mm (31.5”)

Temperature & Humidity control range(TH series only)

Relative Humidity % RH

TH-G-800/1000/1500

TH-G-180/300/408, TH-GU-300

TH-I-180/300/408

98%RH

95%RH

Temperature ℃

TH-G type (180, 300, 408L) TH-GU-300

• 40 ~ 85% RH at 15℃ • 25 ~ 98% RH at 25 ~ 80℃ • 25 ~ 80% RH at 90℃

TH-G type (800, 1000, 1500L)

• 50 ~ 90% RH at 20℃ • 45 ~ 95% RH at 25℃ • 40 ~ 95% RH at 30 ~ 80℃ • 40 ~ 80% RH at 90℃

TH-I type (180, 300, 408L)

• 30 ~ 80% RH at 10℃ • 20 ~ 90% RH at 20℃ • 20 ~ 98% RH at 25 ~ 80℃ • 20 ~ 80% RH at 90℃


116


Operating & Constructional features User-friendly design

• Standard environmental test chambers.

• High quality #304 stainless steel exterior and interior.

• Casters for easy mobility when installing or moving environmental test chamber.

• Convenient maintenance-available to view total operating time.

• Spacious chamber volume maximum capacity of 1000L.

• Choose from 15 different model chambers based on size and temperature preference.

- The series comes in 3 different model types based on tempe-rature (&humidity) ranges ranging in -35℃ to 150℃, -35℃ to 120℃, -60℃ to 150℃ / upmost 20 to 98% RH and five different volume capacities of 180L, 300L, 408L, 800L, and 1000L.

• Unique door lock & trim. - Vice lock type door and foam silicone packing to ensure a perfect

seal. - Door open warning alarm.

• Inner door. - Optional inner glass door comes with four holes to handle samples

inside the chamber. (Excludes chambers with volume capacities of 800L or 1000L)

• Ventilation. - Ventilation vent is located at the upper right side of the unit.

• Chart recorder. (optional) - 6-point dot type recorder with a digital display.

• Container type tank for easy adding and changing of water. - Maintenance of the water tank can be easily performed from the

front side. - Checking of the water level and the amount of water remaining

in the tank can be performed by looking through the center viewing window.

• Viewing window for observation. - Tempered glass window provides a clear view of samples in the

chamber, beneficial during testing. - Fluorescent lighting source included.

• Cable port for external probes or wires. - 50mm diameter cable port comes standard on the left side of

the unit. Additional 50mm or 80mm diameter cable ports can be custom ordered. (Optional)

• Easy cleaning of condenser air-filter. - To prevent deterioration of refrigeration system and keep filter

dust free by periodically cleaning the filter.

Safety functions • Leakage breaker for power supply. • Over current protection. • Overheat / overcool protection. • Switch-off after alarm for over heating. • Water empty alarm. (TH-G / TH-GU / TH-I only)

• Door open alarm. • Vice lock door type locking mechanism.

Color LCD Controller

Digital Recorder (optional)

Door Catch & Trim


117


Control operation • Microprocess PID control / Auto-tuning / Calibration.

• Chamber supports three different languages : English, Chinese, and Korean.

• Optimize CPU logic control system. - Optimum control of temperature / humidity with economical

power consumption.

• Touch screen type display. - 5.7-inch Color LCD display with interactive input system. : Easily visible set value: set point (SP) /present value (PV) are also

added on the colorful LCD controller. - Temperature & humidity / timer settings and operation condition. - Temperature, humidity, and other operating parameters can be

recorded using a chart recorder.

• Programming operation.

Description TH-G, I, GU /TC-G, GU series

Programmable pattern capacity 120Pattern repeat time 999Max. segments per a pattern 100Available max. segments* 1200Programmable process time per a segment 0 to 99 hr 59 min

* Even though the max. segments per a pattern are 100, available total seg-ments are up to 1200 not 12000, so you need to arrange the number of segment an patterns properly.

• Computer interface. - Save data in excel format. - Software provided. - Storage of program information, backup of value settings /

recovery, and temperature / humidity values. - RS-232C port as standard offer.

• RS-485 communication port offers connection of a maximum of 9 temperature & humidity chamber units to one PC. (optional)

Air filter

Ventilation

Water Tank

Single-control Display Multi-control Display

Program setting Display Graph Display


118

Temperature & Humidity Chambers


Model TH-G-180 TH-G-300 TH-G-408 TH-G-800 TH-G-1000 TH-G-1500Chamber volume (L / cu ft) 180 / 6.4 300 / 10.6 408 / 14.4 800 / 28.3 1000 / 35.3 1500 / 53.0Control system BDBC2 system - Balanced Dehumidifying & Bath Cooling controlController Programmable, Touch screen type controller (5.7” Color monitor)

Temperature

Range (±℃ / ℉)- without humidity

-35 to 150 / -31 to 302* best programmable control range : -30 to 140 / -22 to 284 -35 to 150 / -31 to 302

Fluctuation 1) (±℃ / ℉) at 55℃ / 60%RH 0.1 / 0.18 0.2 / 0.36 0.2 / 0.36 0.3 / 0.55 0.3 / 0.55 0.3

Variation 1) (±℃ / ℉) at 55℃ / 60%RH 0.6 / 1.08 0.5 / 0.9 0.5 / 0.9 0.5 / 0.9 0.5 / 0.9 0.5

Time

Heating - without humidity (Min.)

50 From -35℃ to 120℃ (-31℉ to 248℉) 60 From -35℃ to 120℃ (-31℉ to 248℉)

Cooling - without humidity (Min.)

60 From 20℃ to -35℃ (68℉ to -31℉) 85 From 20℃ to -35℃ (68℉ to -31℉)

On singe point control *

Humidity

Range (%RH)

40 to 85 at 15℃ (59℉) 50 to 90 at 20℃ (68℉) 25 to 98 at 25℃ to 80℃ (77℉ to 176℉) 45 to 95 at 30℃ to 80℃ (86 to 176℉) 25 to 80 at 90℃ (194℉) 40 to 80 at 30℃ to 90℃ (86 to 194℉)

Fluctuation 1) (±%RH) at 60%RH / 55℃ 0.3 0.4 0.3 0.5 0.6 3

Variation 1) (±%RH) at 60%RH / 55℃ 3.0 3.5

RefrigerationSystem Mechanical single stage refrigerator system

(air-cooled condenser)Mechanical dual stage refrigerator system (air-cooled condenser)

Refrigerant R-404A R-404A (1st step), R-23 (2nd step)

Capacity (W) 1500 4250 6000Cooler Plate fin cooler

HeaterMaterial Ni-Cr Wire Heater / SUS sheath Heater SUS Tube heater

Drying bulb (W) 2000 3000 5000Humidity bulb (W) 1500 2000 3500

SensorTemperature Pt 100Humidity Electronic sensor - Free of drying a wet pack and good reaction time

Material

Interior Stainless steel #304Exterior Stainless steel #304Insulation Polyurethane foam 100mm (3.94”)

Door Glass woolAir flow Tangent blower (90W) 4 sets of sirocco fan (4×90W)

Water supplyCapacity 15L (0.53cu ft) - Cartridge type Direct water supplying systemWater quality pH6.2 to 7.2 / Electrical conductivity 20㎲ /cm to below

Dimensions(W×D×H)

Interior (mm / inch)500×630×600/ 19.7×24.8×23.6

600×630×800/ 23.6×24.8×31.5

600×850×800/ 23.6×33.5×31.5

1000×800×1000/ 39.4×31.5×39.4

1000×1000×1000/ 39.4×39.4×39.4

1000×1000×1500 / 39.4×39.4×59.1

Exterior (mm / inch)1025×1035×1530/ 40.4×40.7×60.2

1120×1070×1730/ 44.1×42.1×68.1

1120×1240×1730/ 44.1×44.8×68.1

1570×1245×2060/ 61.8×49.0×81.1

1570×1445×2060/ 61.8×56.9×81.1

1570×2045×2050 / 61.8×80.5×80.7

Viewing windows(mm / inch) 200×330 / 7.9×13.0 270×330 / 10.6×13.0

Net weight (kg / lbs) 310±10 / 683.4±22.0 375±10 / 826.7±22.0 400±10 / 881.8±22.0 610±10 / 1345±22.0 670±10 / 1477±22.0 750±10 / 1653.5±22.0

Cable Port Basically one hole provided / Ø50mm (2.0”)Optionally max. two holes available / Ø50 or 80mm (2.0 or 3.2”)

Interface Port Basically RS-232C [RS-485(Maximum 9 Units Control)-Optional]

Electrical Requirements (230V, 60Hz) 1ph / 23.0A - -Cat. No. AAH80011 AAH80021 AAH80031 - - -Electrical Requirements (230V, 50Hz) 1ph / 23A 50Hz / 3ph / 22.5A 50Hz / 3ph / 37.7ACat. No. AAH80012 AAH80022 AAH80032 AAH80042 AAH80052 AAH80072KElectrical Requirements (380V, 50Hz) 3ph / 7.7A 50Hz / 3ph / 13.0A 50Hz / 3ph / 20.6ACat. No. AAH80018 AAH80028 AAH80038 AAH80048 AAH80058 AAH80078

1) Technical data. (according to DIN 12880, IEC 60068)※ Certification only for the TH-G-180∙300∙408※ Permissible ambient Condition: Temperature 18 to 30℃ (64.4 to 86℉), Maximum relative humidity 85%.※ All specifications are under ambient temperature 20℃ (68℉), no load.


Certification only for the TH-G-180.300.408

119



Model TH-I-180 TH-I-300 TH-I-408Chamber volume (L / cu ft) 180 / 6.4 300 / 10.6 408 / 14.4

Control system BDBC2 system - Balanced Dehumidifying & Bath Cooling control

Controller Programmable, Touch screen type controller (5.7” Color monitor)

Temperature

Range (℃ / ℉) -35 to 150 / -31 to 302 without humidity

* best programmable control range : -30 to 140 / -22 to 284

Fluctuation 1) (±℃ / ℉) at 55℃ / 60%RH 0.1 / 0.18 0.2 / 0.36 0.2 / 0.36

Variation 1) (±℃ / ℉) at 55℃ / 60% 0.6 / 1.08 0.5 / 0.9 0.5 / 0.9

TimeHeating - without humidity (Min.) 50 From -35℃ to 120℃ (-31℉ to 248℉)

Cooling - without humidity (Min.) 60 From 20℃ to -35℃ (68℉ to -31℉) on singe point control *

Humidity

Range (%RH)

30 to 80 at 10℃ (50℉)

20 to 98 at 20 to 80℃ (68 to 176℉)

20 to 80 at 90℃ (194℉)

Fluctuation 1) (±%RH) at 60%RH / 55℃ 0.3 0.4 0.3

Variation 1) (±%RH) at 60%RH / 55℃ 3 3 3

Refrigeration

System Mechanical single stage refrigerator system(air-cooled condenser)

Refrigerant R-404A

Capacity (W) 1500

Cooler Plate fin cooler

Heater

Material Ni-Cr Wire Heater / SUS sheath Heater

Drying bulb (W) 2000

Humidity bulb (W) 1500

SensorTemperature Pt 100

Humidity Electronic sensor - Free of drying a wet pack and good reaction time

Material

Interior Stainless steel #304

Exterior Stainless steel #304

Insulation Polyurethane foam 100mm (3.94”)

Door Glass wool

Air flow Tangent blower (90W)

Water supplyCapacity 15L (0.53cu ft) - Cartridge type

Water quality pH6.2 to 7.2 / Electrical conductivity 20㎲ /cm to below

Dimensions(W×D×H)

Interior (mm / inch)500×630×600/ 19.7×24.8×23.6

600×630×800/ 23.6×24.8×31.5

600×850×800/ 23.6×33.5×31.5

Exterior (mm / inch)1025×1035×1530/ 40.4×40.7×60.2

1120×1070×1730/ 44.1×42.1×68.1

1120×1240×1730/ 44.1×44.8×68.1

Viewing windows (mm / inch) 200×330 / 7.9×13.0

Net weight (kg / lbs) 310±10 / 683.4±22.0 375±10 / 826.7±22.0 400±10 / 881.8±22.0



Electrical Requirements (230V, 60Hz) 1ph / 23.0A

Cat. No. AAH80111 AAH80121 AAH80131





1) Technical data. (according to DIN 12880, IEC 60068)※ Permissible ambient Condition : Temperature 18 to 30℃ (64.4 to 86℉), Maximum relative humidity 85%※ All specifications are under ambient temperature 20℃ (68℉), no load.


120

Temperature & Humidity Chambers Environmental Chambers


Model TH-GU-300Chamber volume (L / cu ft) 300 / 10.6



Temperature


*best programmable control range : -50 to 140 / -58 to 284

Fluctuation 1) (±℃ / ℉) at 40℃ / 60%RH 0.3 / 0.54

Variation 1) (±℃ / ℉) at 40℃ / 60%RH 0.5 / 0.9


Cooling - without humidity (Min.) 65 From 20℃ to -60℃ (68℉ to -76℉) on singe point control

Humidity

Range (%RH)

40 to 85 at 15℃ (59℉)

25 to 98 at 25 to 80℃ (77 to 176℉)

25 to 80 at 90℃ (194℉)

Fluctuation 1) (±%RH) 3

Variation 1) (±%RH) 3

Refrigeration

System Mechanical single stage refrigerator system (air-cooled condenser)

Refrigerant R-404A / R-23

Capacity (W) 3000


Heater






Material




Door Glass wool



Water quality pH6.2 to 7.2/ Electrical conductivity 20㎲ / cm to below

Dimensions(W×D×H)

Interior (mm / inch) 600×630×800 / 23.6×24.8×31.5

Exterior (mm / inch) 1120×1070×1730 / 44.1×42.1×68.1


Net weight (kg / lbs) 395±10 / 870.8±22.0




Cat. No. AAH80321


Cat. No. AAH80322


Cat. No. AAH80328

1) Technical data. (according to DIN 12880, IEC 60068)※ Permissible ambient Condition: Temperature 18 to 30℃ (64.4 to 86℉), Maximum relative humidity 85%.※ Upon request, other sizes of chambers are available. Please contact with us.※ All specifications are under ambient temperature 20℃ (68℉), no load.

121

Temperature ChambersEnvironmental Chambers


Model TC-G-180 TC-G-300 TC-G-408 TC-G-800 TC-G-1000 TC-G-1500Chamber volume (L / cu ft) 180 / 6.4 300 / 10.6 408 / 14.4 800 / 28.3 1000 / 35.3 1500 / 53.0

Control system Cooling fuzzy control system


Temperature

Range (℃ / ℉) -35 to 150 / -31 to 302

Fluctuation 1) (±℃ / ℉) at 100℃ 0.2 / 0.36 0.1 / 0.18

Variation 1) (±℃ / ℉) at 100℃ 0.9 / 1.62 1.0 / 1.80 0.8 / 1.44 0.4 / 0.72 0.5 / 0.9 0.5 / 0.9

Time

Heating - without humidity (Min.)

50 From -35℃ to 120℃ (-31℉ to 248℉) 60 From -35℃ to 120℃ (-31℉ to 248℉)

Cooling - without humidity (Min.)

60 From 20℃ to -35℃ (68℉ to -31℉) 85 From 20℃ to -35℃ (68℉ to -31℉)

On singe point control

Refrigeration

System Mechanical single stage refrigerator system(air-cooled condenser)

Mechanical dual stage refrigerator system (air-cooled condenser)

Refrigerant R-404A R-404A (1st step), R-23 (2nd step)

Capacity (W) 1500 4250 6000


HeaterMaterial Ni-Cr Wire Heater SUS TUBE Heater

Drying bulb (W) 2000 3000 5000

Sensor Temperature Pt 100

Material




Door Glass wool

Air flow Tangent blower (90W) 4 sets of sirocco fan (4×90W)

Dimensions(W×D×H)

Interior (mm / inch)500×630×600/ 19.7×24.8×23.6

600×630×800/ 23.6×24.8×31.5

600×850×800/ 23.6×33.5×31.5

1000×800×1000/ 39.4×31.5×39.4

1000×1000×1000/ 39.4×39.4×39.4

1000×1000×1500 / 39.4×39.4×59.1

Exterior (mm / inch)1025×1035×1530/ 40.4×40.7×60.2

1120×1070×1730/ 44.1×42.1×68.1

1120×1240×1730/ 44.1×44.8×68.1

1570×1245×2060/ 61.8×49.0×81.1

1570×1445×2060/ 61.8×56.9×81.1

1570×2045×2050 / 61.8×80.5×80.7

Viewing windows(mm / inch) 200×330 / 7.9×13.0 270×330 / 10.6×13.0

Net weight (kg / lbs)310±10 / 683.4±22.0

375±10 / 826.7±22.0

400±10 / 881.8±22.0

610±10 / 1345±22.0

670±10 / 1477±22.0

750±10 / 1653.5±22.0



Electrical Requirements (230V, 60Hz) 1ph / 16.2A - -

Cat. No. AAH81411 AAH81421 AAH81431 - - -

Electrical Requirements (230V, 50Hz) 1ph / 16.2A 3ph / 22.5A 3ph / 28.5A

Cat. No. AAH81412 AAH81422 AAH81432 AAH81442 AAH81452 AAH81462K

Electrical Requirements (380V, 50Hz) 3ph / 5.2A 3ph / 11.5A 3ph / 15.2A

Cat. No. AAH81418 AAH81428 AAH81438 AAH81448 AAH81458 AAH81468K

1) Technical data. (according to DIN 12880, IEC 60068)※ Certification only for the TC-G-180∙300∙408.※Permissible ambient Condition: Temperature 18 to 30℃ (64.4 to 86℉), Maximum relative humidity 85%.※ All specifications are under ambient temperature 20℃ (68℉), no load.

Please visit .comFor further information on Jeio Tech´s Temperature Chamber products Information is readily available on our website.

Certification only for the TC-G-180.300.408

122

Temperature ChambersEnvironmental Chambers


Model TC-GU-300Chamber volume (L / cu ft) 300 / 10.6

Control system Cooling fuzzy control system


Temperature

Range (℃ / ℉)-60 to 150 / -76 to 302 without humidity

*best programmable control range : -50 to 140 / -58 to 284

Fluctuation 1) (±℃ / ℉) at 40℃ 0.3 / 0.54

Variation 1) (±℃ / ℉) at 40℃ 0.5 / 0.9

TimeHeating (Min.) 60 From -60℃ to 120℃ (-76℉ to 248℉)

Cooling (Min.) 65 From 20℃ to -60℃ (68℉ to -76℉) on singe point control

Refrigeration


Refrigerant R-404A (1st step), R-23 (2nd step)

Capacity (W) 3000


HeaterMaterial Ni-Cr Wire Heater


Temperature Sensor Pt 100

Material




Door Glass wool


Water supplyCapacity 600× 630×800 / 23.6×24.8×31.5

Water quality 1120×1070×1730 / 44.1×42.1×68.1

Dimensions(W×D×H)

Interior (mm / inch) 200×330 / 7.9×13.0

Exterior (mm / inch) 375±10 / 870.8 ±22.0

Viewing windows (mm / inch) Basically one hole provided / Ø 50mm (2.0”)

Net weight (kg / lbs) Optionally max. two holes available / Ø 50 or 80mm (2.0 or 3.2”)

Cable Port Basically one hole provided / Ø 50mm (2.0”)Optionally max. two holes available / Ø 50 or 80mm (2.0 or 3.2”)



Cat. No. AAH81521


Cat. No. AAH81522

Electrical Requirements (380V, 60 / 50Hz) 3ph / 8.3A

Cat. No. AAH81528

1) Technical data. (according to DIN 12880, IEC 60068)※ Permissible ambient Condition: Temperature 18 to 30℃ (64.4 to 86℉), Maximum relative humidity 85%.※ All specifications are under ambient temperature 20℃ (68℉), no load.

123


TH-TG Series


TH-ICH Series

Please visit .comFor further information on Jeio Tech´s Environmental Chamber products Information is readily available on our website.

Certification without TH-TG-1500

124


TEMPERATURE & HUMIDITY CONTROL RANGE TH-TG type (190 to 960L)

• 40~90% RH at 10℃

• 20~95% RH at 30℃

• 10~95% RH at 50~80℃

• 10~80% RH at 90℃

TH-TG type (1500L)

• 40~90% RH at 15℃

• 30~95% RH at 30℃

• 20~95% RH at 50~80℃

• 20~85 RH at 85℃

TH-ICH type (300, 760L)

• 40~80% RH at 15℃

• 30~85% RH at 30℃

• 20~85% RH at 50~85℃


Dimensions(TH-TG / TH-ICH series)

Model Capacity W D H A BTH-TG-180 190L (6.7 cu ft) 880mm (34.6”) 945mm (37.2”) 1465mm (57.7”) 420mm (16.5”) 880mm (34.6”)

TH- TG -300 300L (10.6 cu ft) 1130mm (44.5”) 945mm (37.2”) 1520mm (59.8”) 420mm (16.5”) 905mm (35.6”)

TH-TG-408 410L (14.5 cu ft) 1130mm (44.5”) 1045mm (41.1”) 1520mm (59.8”) 520mm (20.5”) 905mm (35.6”)

TH-TG-800 760L (26.8 cu ft) 1220mm (48”) 1175mm (46.3”) 1965mm (77.4”) 520mm (20.5”) 1010mm (39.8”)

TH-TG-1000 960L (33.9 cu ft) 1220mm (48”) 1415mm (55.7”) 1965mm (77.4”) 635mm (25”) 1010mm (39.8”)

TH-TG-1500 1500L (53.0 cu ft) 1450mm (57.1”) 1900mm (74.8”) 2065mm (81.3”) 635mm (25”) 800mm (31.5”)

TH-ICH-300 300L (10.6 cu ft) 1130mm (44.5”) 985mm (33.8”) 1520mm (59.8”) 460mm (18.1”) 905mm (35.6”)

TH-ICH-800 760L (26.8 cu ft) 1220mm (48”) 1215mm (47.8”) 1965mm (77.4”) 545mm (21.5”) 1185mm (46.7”)

TH-TG-1500

TH-ICH 300/800

TH-TG-180/300/408/800/1000

125

The temperature & humidity chamber units comply with the ICH guidelines.Stability Testing Q1A (R2)-ICH, TG Chamber series.Photostability Testing Q1B (Option 2)-ICH Chamber series.


Constructional features • High quality #304 stainless steel exterior and interior.


• Convenient maintenance. - Available to check total operating time.

• Unique door lock & trim.

• Vice lock type door and foam silicone packing to ensure a perfect seal.

• Cable port for external probes or wires.

• 50mm diameter cable port comes standard on the left side of the unit. Additional 50mm or 80mm diameter cable ports can be custom ordered. (Optional)


front side.

• Door lock. (Optional)

• Cyclic defrost functions does not affect the temperature & humi-dity control for extended operation. (Under 15℃ set value)

• Powerful two sirocco fans maintains a constant airflow in the chamber.

Additional TH-ICH 300, 800 Features • In the event of a validation the apparatus correctly controls each

light and then transfers accurate data and is equipped with light sensors. (UV light sensor / VIS light sensor)

• Samples that have to be exposed to the light in which it is com-pletely near the UV energy of less than 200W-hr/m2 is provided to compare directly the results from overall intensity of less than 1.20 million lux-hr, drug substances and reagent.

• Total fluorescent lamp & UV lamp indicator and operating time indicator.

Safety Functions • Leakage breaker for power supply. • Over current protection. • Overheat protection. • Switch-off after alarm for over heating. • Door open alarm. • Water empty. • Vice lock door type locking mechanism. (Optional) • Alarm for completed Photostability Test. (Only TH-ICH series)

Control Operation • Microprocess PID control / Auto-tuning / Calibration.

• Digital LCD display with touch-sensitive 7 keypads.

• Easy operation with wide LCD screen. - Temperature & humidity / timer settings and operation condition.

• Program patterns are memorized for 10 years due to a battery built into the PCB.

• Expansion parameter inputs. (Conveniently display by letters)


• Computer interface. - Software provided. - Save data in excel format. - Storage of program information, backup of value settings /


• Chart recorder. (Optional) - 6-point dots type recorder with digital display. - Digital recorder. (6-Channels)


126

Temperature & Humidity ChambersEnvironmental Chambers


Model TH-TG-180 TH-TG-300 TH-TG-408 TH-TG-800 TH-TG-1000 TH-TG-1500Chamber volume (L / cu ft) 190 / 6.7 300 / 10.6 410 / 14.5 760 / 26.8 960 / 33.9 1500 / 53.0Controller PID control (LCD Type)

Temperature 1)

Range

Without humidity (℃ / ℉)

-5 ~ 100 / 23 ~ 212

With humidity (℃ / ℉)

+10 ~ 90 / 50 ~ 194 +15~85

Fluctuation 1) (±℃ / ℉)at 40℃ / 60%RH 0.3 / 0.55 0.5 / 0.9

Variation 1) (±℃ / ℉)at 40℃ / 60%RH 0.5 / 0.9 0.7 / 1.3 1.0 / 1.8

Humidity

Range (%RH)

FULL RANGE : 10 ~ 95%RH40 ~ 90 at 10℃ / 50℉30 ~ 95 at 20℃ / 68℉10 ~ 95 at 50℃ ~ 80℃ / 122℉ ~ 176℉10 ~ 80 at 90℃ / 194℉

FULL RANGE : 20~95%RH 40 ~ 90% RH at 15℃ (59℉) 30 ~ 95% RH at 30℃ (86℉) 20 ~ 95% RH at 50℃~80℃ (122℉ ~ 176℉) 20 ~ 85% RH at 85℃ (194℉)

Fluctuation 2) (±%RH) at 60%RH / 40℃ 2.0

Variation 2) (±%RH) at 60%RH / 40℃ 3.0

TimeHeating 4) 50min

(-5℃ 100℃)55min

(-5℃ 100℃)

Cooling 4) 120min(100℃ -5℃)

145min(100℃ -5℃)

RefrigerationSystem Air - cooledRefrigerant R- 404ACapacity (W) 150 250 250 470 470 470×2

Cooler Copper plate fin cooler

HeaterMaterial Ni-Cr Wire Heater / SUS Tube HeaterDrying bulb (W) 1000 1500 1500 2300 2300 3000Humidity bulb (W) 1000 1200 1200 2000 2000 2500

SensorTemperature Pt 100Humidity Electronic sensor (Free of drying a wet pack and good response time)

Air flow 2 set of sirocco fan (2×60 W) : Vertical type 4 set of sirocco fan(4×60W) : Vertical type

Material

Internal SUS #304 (2B polish)

External SUS #304 (Hairline finish) & Steel, 2.0t, Double painted & bakedInsulation Polyurethane (70mm / 2.76”)

Door GlasswoolOperating temperature 18℃ ~ 30℃ / 64.4℉~56℉, 85%RH (Non-corrosive and pure place)

Water tankCapacity (L / cu ft) 15 / 0.53 30 / 1.1Water quality pH6.2 ~ 7.2, Electrical conductivity 20㎲ / cm to below

Interface Port Basically RS-232C, [RS-485 : Optional]

Cable port Basically one hole provided / Ø 50mm (2.0”),Optionally max. two holes available / Ø 50 or 80mm (2.0 or 3.2”)

Viewing Window (mm / inch) 230×340 / 9.1×13.4 (Option)

Dimension(W×D×H)

Internal(mm / inch)

500×650×600 / 19.7×25.6×23.6

750×650×650 / 29.5×25.6×25.6

750×850×650/ 29.5×33.5×25.6

750×880×1160/ 29.5×34.6×45.7

750×1110×1160/ 29.5×43.7×45.7

1000×1000×1500 / 39.4×39.4×59.1

External(mm / inch)

880×945×1465 / 34.6×37.2×57.7

1130×945×1520/ 44.5×37.2×59.8

1130×1045×1520 / 44.5×41.1×59.8

1220×1175×1965 / 48.0×46.3×77.3

1220×1415 ×1965/ 48.0×55.7×77.4

1450×1900×2065 / 57.1×74.8×81.3

Net weight (kg / lbs) 220±10 / 485±22 250±10 / 485±22 280±10 / 617±22 360±10 / 794±22 410±10 / 904±22 480±10 / 1058±22

Electrical Requirements

AC230V, 1ph, 60Hz 13.1 A 15.4 A 15.4 A 24.5 A 24.5 A 30.5ACat.No. AAHC2001K AAHC2011K AAHC2021K AAHC231K AAHC2041K AAHC2051KAC230V, 1ph, 50Hz 12.4 A 14.7 A 14.7 A 23.5 A 23.5 A 29.2ACat.No. AAHC2002K AAHC2012K AAHC2022K AAHC2032K AAHC2042K AAHC2052K

1) All specifications are under ambient temperature 20℃ (68℉), no load.2) Technical data. (according to DIN 12880, IEC 60068)3) The value is measured on the center of chamber at the point of vertical direction.4) Up to 98% of the set value.※ Certification without TH-TG-1500

Certification without TH-TG-1500

127

Temperature & Humidity ChambersEnvironmental Chambers


Model TH-ICH-300 TH-ICH-800Chamber volume (L / cu ft) 300 / 10.6 760 / 26.8Controller PID control (LCD Type)

Temperature 1)

Range

Without humidity (℃ / ℉)

-5 ~ 85 / 23~185 without Light0 ~ 85 / 32~185 with Light

With humidity (℃ / ℉)

+15 ~ 85 / 59~185 with Light

Fluctuation 1) (±℃ / ℉)at 40℃ / 60%RH 0.3 / 0.55 0.3 / 0.55

Variation 1) (±℃ / ℉)at 40℃ / 60%RH 0.5 / 0.9 0.7 / 1.3

Humidity

Range (%RH)

FULL RANGE : 20 ~ 85%RH40 ~ 80 at 15℃ / 59℉30 ~ 85 at 30℃ / 86℉20 ~ 85 at 50℃ ~ 85℃ / 122℉ ~ 185℉

Fluctuation 2) (±%RH) at 60%RH / 40℃ 3.0

Variation 2) (±%RH) at 60%RH / 40℃ 5.0

Light source(ICH Q1B option 2)

Cool white 3) 6,000 lux 6,500 luxUltraviolet-A 3) 4.5 W/㎡ 5.0 W/㎡

Light Uniformity VIS. : ±10% UVA : ±15%

VIS. : ±15% UVA : ±15%

Typical Time Required to Reach ICH Recommendation of 1.2 million lux-hr

≒ 200Hr ≒ 184Hr

Typical Time Required to Reach ICH Recommendation of 200 W-hr/m2

≒ 50Hr ≒ 40Hr

TimeHeating 4) 25min (20℃ 85℃) 30min (20℃ 85℃)

Cooling 4) 35min (20℃ -5℃) 40min (20℃ -5℃)

Refrigeration

System Air - cooledRefrigerant R- 404ACapacity (W) 250 470

Cooler Copper plate fin cooler

Heater

Material Ni-Cr Wire Heater / SUS Tube HeaterDrying bulb (W) 1500 2300 Humidity bulb (W) 1200 2000

SensorTemperature Pt 100Humidity Electronic sensor (Free of drying a wet pack and good response time)

Air flow 2 set of sirocco fan (2×60 W) : Vertical type

Material

Internal SUS #304 (2B polish)

External SUS #304 (Hairline finish) & Steel, 2.0t, Double painted & bakedInsulation Polyurethane (70mm / 2.76”)

Door EPDM SheetOperating temperature 18℃ ~ 30℃ / 64.4℉~ 56℉, 85%RH (Non-corrosive and pure place)

Water tankCapacity (L / cu ft) 15 / 0.53Water quality pH6.2 ~ 7.2, Electrical conductivity 20㎲ / cm to below

Interface Port Basically RS-232C, [RS-485 : Optional]

Cable port Basically one hole provided / Ø 50mm (2.0”),Optionally max. two holes available / Ø 50 or 80mm (2.0 or 3.2”)

Dimension(W×D×H)

Internal (mm / inch) 750×650×650 / 29.5×25.6×25.6 750×880×1160 / 29.5×34.6×45.7 External (mm / inch) 1130×985×1520 / 44.5×38.8×59.8 1220×1215×1965 / 48.0×47.8×77.4

Net weight (kg / lbs) 280±10 / 617±22 400±10 / 882±22


AC230V, 1ph, 60Hz 15.4 A 24.5 ACat.No. AAHC1001K AAHC1011K

AC230V, 1ph, 50Hz 14.7 A 23.5 ACat.No. AAHC1002K AAHC1012K

1) All specifications are under ambient temperature 20℃ (68℉), no load.2) Technical data. (according to DIN 12880, IEC 60068)3) The value is measured on the center of chamber at the point of vertical direction.4) Up to 98% of the set value.

128

※ In the year of 2010, this products design can be changed without prior notice.

Temperature (& Humidity) Chambers - Tabletop type

TH-ME / TH-PE / TC-ME Series



129


Temperature & Humidity control range(TH-KE / ME / TH-PE series only)

TH-KE / ME type (25 to 100L)

• 45~75% RH at 15℃

• 20~95% RH at 40~80℃

• 20~90% RH at 90℃

TH-PE type (25 to 100L)

• 45~95% RH at 20℃

• 30~95% RH at 30~80℃

• 30~90% RH at 85℃

Relative Humidity % RH

95%RH

30% RH

20% RH85℃

90℃

Temperature ℃

TH-PE-025/065/100

TH-KE / ME-025/065/100

TH-PE-025/065/100TH-KE / ME-025/065/100 [Including TH-PE control range]


Dimensions(TH-ME / TH-PE / TC-ME series)

Models Capacity W D H A B

TH-METH-PETC-ME




TH-KE TC-KE



100L (3.53 cu ft) 760mm (29.9”) 1070mm (42.1”) 1085mm (42.7”) 318mm (12.5”) 56.3mm (22.2”)

130

Operating & Constructional features(TH - KE / ME / PE series only)

User-friendly design • Small size & light weight.

• Compact design with high performance.

• Choose from 9 different model chambers based on size and temperature preference.

- The series comes in 3 different model types based on tempe-rature (& humidity) ranges ranging in -20℃ to 150℃, -0℃ to 120℃, -20℃ to 150℃ / upmost 20 to 95% RH and three different volume capacities of 20L, 65L, 100L.

• Efficient system with durable materials. - The evaporating system for better thermal efficiency with

corrosion-resistant materials. - The heating system with minimized potential heat when heating

or cooling for prompt reaction time and advanced performance.

• Water tank for easy water supply. - Maintenance can be done easily from the front side.

• Viewing window. - A tempered glass window provides a clear view of samples in the

chamber, beneficial during testing.


the unit. Additional 50mm or 80mm diameter cable ports can be custom ordered. (Optional)

• Optional stand for space-saving layout. - For use in limited spaces: stand & casters. ※ Be sure to secure the stand onto floor with earthquake resistant fitting

for your safety when using stand.

Safety functions • Leakage breaker for power supply. • Over current protection. • Overheat / overcool protection. • Switch-off after alarm for over heating. • Door open alarm. • Water empty alarm. (TH-ME / TH-PE)

Controller

Inner glass door

Portable Digital Recorder (optional)




131

Control operation • Microprocessor PID control / Auto-tuning / Calibration.

• Digital LCD display with touch-sensitive keys.

• Easy operation with wide LCD screen. - Temperature & humidity / timer settings and operating condition.


• Expansion parameter inputs. (displayed by letters)


Description TH-ME / PE, TC-ME seriesProgrammable pattern capacity 10

pattern repeat time 999

Max. segments pera pattern 100

Available max. segments* 100

Programmable process time pera segment 0 to 99 hr 59 min

* Even though the max. segments per a pattern are 100, available total segments are up to 300 not 3000, so you need to arrange the number of segment and patterns properly.

• Computer interface. (optional) - Software provided - Save data in excel format. - Storage of program information, backup of value settings /


• Chart Recorder. (optional) - 6 point dot type recorder with digital display.

• RS-485 communication port offers a maximum of 9 temperature humidity chambers to be connected by one PC. (optional)

Water Tank

Exclusive stand for the chamber

Multi-control Display Single-control Display

Program setting Display Graph Display



132




Model TH-KE-025 TH-KE-065 TH-KE-100Chamber volume (L / cu ft) 25 / 0.9 65 / 2.3 100 / 3.53


Controller Program controller (LCD type)

Temperature 1)

Range (℃ / ℉) -35~150 / -31~302 without humidity +15~90 / 59~194 with humidity

Fluctuation2) (±℃ / ℉) at 50℃ / 60%RH 0.5 / 0.90

Variation2) (±℃ / ℉) at 50℃ / 60%RH 1.0 / 1.8

TimeHeating3) without humidity (Min.) 60 (-40℃ 100℃)

Cooling3) without humidity (Min.) 70 (25℃ -35℃)

Humidity

Range (%RH)

FULL RANGE : 20~95%RH 45~75 RH at 15℃ (59℉) 40~95 RH at 20℃ (68℉) 20~95 RH at 40~80℃ (104~176℉) 20~90 RH at 90℃ (194℉)

Fluctuation2) (±%RH) at 60%RH / 50℃ 2

Variation2) (±%RH) at 60%RH / 50℃ 3

Refrigeration


Refrigerant R-404A

Capacity (W) 470 656 750

Cooler Plate fin cooler (cooper)

Heater

Material Ni-Cr Wire Heater/SUS TUBE Heater

Drying bulb (W) 800 1000 1200

Humidity bulb (W) 800 1000 1200



Air flow (sirocco fan) 60W×1EA 60W×1EA 60W×2EA

Material

Internal Stainless steel #304 (2B polish)

External Stainless steel #304 & Steel, 0.8t, Double painted & baked

Insulation Polyurethane foam 100mm [3.94”]

Door Glasswool

Water tankcapacity (L / cu ft) 5.5 / 0.19 7.2 / 0.25 9.8 / 0.35

quality pH6.2 ~ 7.2, Electrical conductivity 20℃ / cm to below

Interface port BASICALLY RS-232C, [RS-485:OPTIONAL]

Cable port Basically one hole provided / Ø 50mm (2.0”) Optionally max. two holes available/ Ø 50 or 80mm (2.0 or 3.2”)

Dimension (W×D×H)

Internal (mm / inch)350×220×350 / 13.8×8.7×13.8

400×330×495 / 15.7×13.0×19.5

500×380×530 / 19.7×15.0×20.9

External (mm / inch)610×855×920 / 24.0×33.7×36.2

660×970×1065 / 26.0×38.2×41.9

760×1070×1085 / 29.9×42.1×42.7

Weight (kg / lbs) 110 ±10 / 242.5 ±22.0 140 ±10 / 308.6 ±22.0 150 ±10 / 330.7 ±22.0


AC230V, 1ph, 60Hz 10.1A 12.4A 16A


AC230V, 1ph, 50Hz 9.7A 11.8A 15.6A


1) All specifications are under ambient temperature 20℃(68℉), no load 2) Technical data (according to DIN 12880, IEC 60068)3) Up to 98% of the set value※ Permissible ambient Condition: Temperature 18 to 30℃(64.4 to 86℉), Maximum relative humidity 85%※ Recommanded ambient temperature : +20℃(68℉)

133




Model TH-ME-025 TH-ME-065 TH-ME-100Chamber volume (L / cu ft) 25 / 0.9 65 / 2.3 100 / 3.53



Temperature



Variation 1) (±℃ / ℉) at 25℃ / 60% 0.3 / 0.55 0.3 / 0.55 0.3 / 0.55

TimeHeating - without humidity (Min.) 55 From -15℃ to 120℃ (5℉to 248℉)

Cooling - without humidity (Min.) 60 From 20℃ to -15℃ (68℉ to 5℉) on singe point control *

Humidity

Range (%RH)

FULL RANGE : 20~95%RH 45~75% RH at 15℃ (59℉) 40~95% RH at 20℃ (68℉) 20~95% RH at 40~80℃ (104~176℉) 20~90% RH at 90℃ (194℉)



Refrigeration


Refrigerant R-404A

Capacity (W) 250 250 375


Heater


Drying bulb (W) 500 800 1000




Material


Exterior Steel, 1.0mm (0.04”) / Double painted & baked


Door Glass wool

Air flow Sirocco fan (60W)

Water tankCapacity (L / cu ft) 5 / 0.18 6 / 0.21 9 / 0.32

Water quality pH6.2 to 7.2 / Electrical conductivity 20㎲/cm to below

Dimensions(W×D×H)

Interior (mm / inch) 350×220×350 / 13.8×8.7×13.8 400×330×495 / 15.7×13.0×19.5 500×380×530 / 19.7×15.0×20.9

Exterior (mm / inch) 500×760×850 / 19.7×29.9×33.5 550×890×1000 / 21.7×35.0×39.4 650×1000×1030 / 5.6×39.4×40.6

Net weight (kg / lbs) 80±5 / 176.0±11.0 110±5 / 242.0±11.0 130±5 / 286±11.0


Interface Port Basically RS-232C [RS-485 (Maximum 9 Units Control) - Optional]

Electrical Requirements (230V, 1ph, 60Hz) 9.6A 12A 14.4A


Electrical Requirements (380V, 1ph, 50Hz) 9.2A 11.1A 13.8A


1) Technical data. (according to DIN 12880, IEC 60068)

* 80mm cable access hole is NOT available for 25L chamber. (TH-ME-025)

* Above the dimensions are NOT included size of attached accessories.※ Permissible ambient Condition : Temperature 18 to 30℃ (64.4 to 86℉), Maximum relative humidity 85%※ All specifications are under ambient temperature 20℃ (68℉), no load.


134




Model TH-PE-025 TH-PE-065 TH-PE-100Chamber volume (L / cu ft) 25 / 0.9 65 / 2.3 100 / 3.53



Temperature

Range (℃ / ℉) 0 to 120 / 32 to 248 - without humidity


Variation 1) (±℃ / ℉) at 25℃ / 60% 0.3 / 0.55 0.3 / 0.55 0.3 / 0.55

TimeHeating - without humidity (Min.) 40 From 0℃ to 120℃ (32℉ to 248℉)

Cooling - without humidity (Min.) 30 From 20℃ to 0℃ (68℉ to 32℉) on singe point control *

Humidity

Range (%RH)

FULL RANGE : 30~95%RH 45~95% RH at 20℃ (68℉) 30~95% RH at 30~80℃ (86~176℉) 30~90% RH at 85℃ (185℉)



Refrigeration


Refrigerant R-404A

Capacity (W) 250 250 375


Heater

Material Ni-Cr Wire Heater/ SUS sheath Heater

Drying bulb (W) 500 800 1000




Material


Exterior Stainless steel, 1.0mm (0.04”) / Double painted & baked


Door Glass wool


Water tankCapacity (L / cu ft) 5 / 0.18 6 / 0.21 9 / 0.32

Water quality pH6.2 to 7.2/ Electrical conductivity 20㎲/cm to below

Dimensions(W×D×H)

Interior (mm / inch)350×220×350 / 13.8×8.7×13.8

400×330×495 / 15.7×13.0×19.5

500×380×530 / 19.7×15.0×20.9

Exterior (mm / inch)500×760×850 / 19.7×29.9×33.5

550×890×1000 / 21.7×35.0×39.4

650×1000×1030 / 25.6×39.4×40.6

Net weight (kg / lbs) 80±5 / 176.0±11.0 110±5 / 242.0±11.0 130±5 / 286±11.0



Electrical Requirements (230V, 1hp, 60Hz) 9.6A 12.0A 14.4A


Electrical Requirements (380V, 1hp, 50Hz) 9.2A 11.1A 13.8A



* 80mm cable access hole is NOT available for 25L chamber. (TH-PE-025)


135

Temperature Chambers - Tabletop type



Model TC-KE-025 TC-KE-065 TC-KE-100Chamber volume (L / cu ft) 25 / 0.9 65 / 2.3 100 / 3.53

Controller PID control (LCD Type)

Temperature1)

Range (℃ / ℉) -35~150 / -31~302 without humidity

Fluctuation2) (±℃ / ℉) at 50℃ ± 0.5°C

Variation2) (±℃ / ℉) at 50℃ ± 1.0°C

Time

heating3) without humidity (Min.)

60 (-40℃ 100℃)

cooling3) without humidity (Min.)

70 (25℃ -35℃)

Refrigeration


Refrigerant R-404A

Capacity (W) 470 565 657



Drying bulb (W) 1000 1200 1500

Temperature sensor Pt 100

Material

Internal Stainless steel #304 (2B polish)

External Stainless steel #304 & Steel, 0.8t, Double painted & baked

Insulation Polyurethane foam 100mm [3.94”]

Door Glasswool

Air flow (sirocco fan) 60W×1EA 60W×1EA 60W×2EA

Interface port BASICALLY RS-232C, [RS-485:OPTIONAL]

Cable port Basically one hole provided / Ø50mm (2.0”) Optionally max. two holes available / Ø50 or 80mm (2.0 or 3.2”)

Dimension (W×D×H)

Internal (mm / inch)350×220×350 / 13.8×8.7×13.8

400×330×495 / 15.7×13.0×19.5

500×380×530 / 19.7×15.0×20.9

External (mm / inch)610×855×920 / 24.0×33.7×36.2

660×970×1065 / 26.0×38.2×41.9

760×1070×1085 / 29.9×42.1×42.7

Weight (kg / lbs) 110 ±10 / 242.5 ±22.0 140 ±10 / 308.6 ±22.0 150 ±10 / 330.7 ±22.0


AC230V, 1ph, 60Hz7.4A 8.8A 10.8A

AAH86111 AAH86121 AAH86131

AC230V, 1ph, 50Hz7.1A 8.4A 10.3A

AAH86112 AAH86122 AAH86132

1) All specifications are under ambient temperature 20℃(68℉), no load2) Technical data (according to DIN 12880, IEC 60068)3) Up to 98% of the set value※ Permissible ambient Condition: Temperature 18 to 30℃(64.4 to 86℉), Maximum relative humidity 85%

Recommanded ambient temperature : +20℃(68℉)

136

Temperature Chambers - Tabletop type



Model TC-ME-025 TC-ME-065 TC-ME-100Chamber volume (L / cu ft) 25 / 0.9 65 / 2.3 100 / 3.53

Control system Cooling PID control system


Temperature

Range (℃ / ℉) -20 to 120 / -4 to 248

Program control (℃ / ℉) -15 to 120 / -5 to 248

Fluctuation 1) (±℃ / ℉) at 100℃ 0.4 / 0.72 0.3 / 0.55 0.3 / 0.55

Variation 1) (±℃ / ℉) at 100℃ 2.0 / 3.60 1.9 / 3.42 1.8 / 3.24

TimeHeating (Min.) 55 From -15℃ to 120℃ (5℉ to 248℉)

Cooling (Min.) 60 From 20℃ to -15℃ (68℉ to 5℉) on singe point control *

Refrigeration


Refrigerant R-404A

Capacity (W) 250 250 375



Drying bulb (W) 800 1000 1000

Temperature Sensor Pt 100

Material


Exterior Stainless steel, 1.0mm (0.04”) / Double painted & baked


Door Glass wool


Dimensions(W×D×H)

Interior (mm / inch)350×220×350 / 13.8×8.7×13.8

400×330×495 / 15.7×13.0×19.5

500×380×530 / 19.7×15.0×20.9

Exterior (mm / inch)500×760×850 / 19.7×29.9×33.5

550×890×1000 / 21.7×35.0×39.4

650×1000×1030 / 25.6×39.4×40.6

Net weight (kg / lbs) 80±5 / 176.0±11.0 110±5 / 242.0±11.0 130±5 / 286±11.0








* 80mm cable access hole is NOT available for 25L chamber. (TC-ME-025)


137

Fingerprint Development Chamber

Temperature & Humidity control rangeRelative Humidity % RH

TH-PF -100

Temperature ℃

TH-PF-100 • 80 ~ 90% RH at 40℃

• 65 ~ 95% RH at 50℃

• 50 ~ 95% RH at 60℃

• 50 ~ 90% RH at 90℃




138

Exceptional design for Ninhydrin, DFO and other fingerprint development processes.Highly precise controlled microprocessor PID controller for rapid performance. Advanced safety features for protecting evidence. A clear display with LED light indicator and heated glass window.



Operating & Constructional features [Fingerprint Development Chamber]

Constructional Features • Small size & light weight.

• Compact design with high performance.

• Efficient system with durable materials. - The evaporating system for better thermal efficiency with

corrosion-resistant materials. - The heating system with minimized potential heat when heating

or cooling for prompt reaction time and advanced performance.

• Stainless steel interior. - High quality & Corrosion-resistant.

• Water tank for easy water supply. - Maintenance can be done easily from the front side.

(Optional Direct water system.)

• Large viewing window. - A tempered glass door provides a clear view of your specimen

during testing.

• Vice lock type door and foam silicone packing to ensure a perfect seal.

• Cable port for external probes or wires. - B50mm diameter cable port comes standard on the left side of

the unit. - Additional 50mm or 80mm diameter cable ports can be custom

ordered. (optional)

• Optional stand for space-saving layout. - For use in limited spaces: stand & casters. - Chambers can be stacked maximum two high. Be sure to secure the stand to the floor with an earthquake resistant

fitting for safety.

SAFETY FUNCTIONS • Key lockable door for your evidences. • Leakage breaker for power supply. • Over current protection. • Over heat protection. • Switch-off after alarm for overheating. • Automatic shut off after overheat alarm. • Low and empty water level alarm.

Control Operation • Intuitive Control Panel. - Sight Lamp, Window Clean, Water Level indicators.

• Microprocessor PID control / auto tuning / calibration. - Precise temperature & humidity control. - Faster fingerprint development. - Rapid recovery time after the door has been opened.

• Digital LCD display with touch-sensitive keys.

• Easy operation with wide LCD screen. - Temperature & humidity / timer settings and operating condition.

• Digital Timer with acoustic alarm. - Start / Stop button for easy operation. - Digital display for time remaining. - Set time expiring alarm.



• Expansion parameter inputs. (Conveniently display by letters.)

• Computer Interface. (optional) - Software provided. - Save data in excel format. - Storage of program information, backup of value settings /

recovery, and temperature / humidity values. - RS-232C port standard.

• Chart Recorder. (Optional) - 6-point dot type recorder with a digital display.

Control Board


139


Large window for viewing samples and with LED lighting on left and right of the interior door window.Heated glass window eliminates condensation.

Water Tank includedEasy maintenance.Direct water system. (Optional)

Key lockable doorfor your evidences.


Specifications & Ordering Informations (Fingerprint development chamber)

Model TC-ME-025Chamber volume (L / cu ft) 100 / 3.53

Controller PID control (LCD Type)

Temperature

Range (℃ / ℉) 40 ~ 100 / 104 ~ 212

Fluctuation (±℃ / ℉) at 100℃ 0.5 / 0.9

Variation (±℃ / ℉) at 100℃ 0.5 / 0.9

Humidity

Range (%RH)

FULL RANGE : 50 ~ 90%RH80 to 90 at 40℃65 to 95 at 50℃50 to 90 at 90℃

Fluctuation (±%RH) 3.0

Variation (±%RH) 3.0

Heater

Material Ni-Cr Wire Heater / SUS cartridge Heater

Drying bulb 400W

Humidity bulb 400W


Humidity Electronic sensor (free of drying a wet pack and good response time)

Air flow 2 set of sirocco fan (60W)

Material

Interior SUS #304 (2B polish)

Exterior SUS #304 & Steel, 1.0t, Double painted & baked

Insulation Polyurethane (70mm)

Door Glasswool

Water tankcapacity (L / cu ft) 9 / 0.32

quality pH6.2 ~ 7.2, Electrical conductivity 20㎲ / cm to below

Viewing Window (mm / inch) 280×430 / 11.02×16.9

Cable port Basically one hole provided / Ø 50mm (2.0”)Optionally max. two holes available/ Ø 50 or 80mm (2.0 or 3.2”)

Interface Basically RS-232C [RS-485 [Maximum 9 Units Control] - Optional]

Dimensions(W×D×H)

Interior (mm / inch) 500×380×530 / 1.97×15.0×20.9

Exterior (mm / inch) 670×845×1045 / 26.4×33.3× 41.15

Weight (kg / lbs) 115kg±5kg / 253.5±11.0

Electrical Requirements AC230V, 1ph, 60Hz 4.5A

Cat. No. AAH82331

Electrical Requirements AC230V, 1ph, 50Hz 4.3A

Cat. No. AAH82332

※ Permissible ambient conditions : Temperature 18 to 30℃(64.4 to 86.0℉), Maximum relative humidity 85%※ Recommended ambient temperature : +20℃(68℉)※ All specifications are under ambient temperature 20℃(68℉), no load.

140

Clean Temperature & Humidity Chambers

Temperature & Humidity control rangeRelative Humidity % RH

90% RH

TH-CR-270

85℃

Temperature ℃

TH-CR-270 • 50~90% RH at 20℃

• 40~90% RH at 30℃

• 30~90% RH at 40~85℃

TH-CR-270



141


User-friendly design • Standard clean environmental test chambers.

• Silicone-free safe construction.

• High quality type 304 grade stainless steel exterior and interior.


• Convenient maintenance-available to view total operating time. - available to check total operating time.

• Unique door lock & trim. - Vice lock type door and foam silicone packing to ensure a

perfect seal. - Door open warning alarm.

• Inner door. - Optional inner glass door comes with four holes to handle

samples inside the chamber.

• Exhaust duct. - Exhaust duct is located at the upper right side of the unit.

• RChart Recorder. (optional) - 6 point dot type recorder with digital display.


front side. - Checking of the water level and the amount of water remaining

in the tank can be performed by looking through the center viewing window.

• Viewing window. - Tempered glass window provides a clear view of samples in the

chamber, beneficial during testing. - Fluorescent lighting source included.


the unit. - Additional 50mm or 80mm diameter cable ports can be custom

ordered. (Optional)



Dimensions(TH-CR-270)

Models Capacity W D H* A BTH-CR-270 270L (9.5 cu ft) 1180mm (46.5”) 1120mm (44.1”) 1935mm (76.1”) 325mm (12.8”) 1155mm (45.5”)

Operating & Constructional features

Inner chamber


142

Capable for the best cleaned temperature and humidity chamber! By employing a HEPA filter and a top to bottom laminar air flow system, a class 100 controlled chamber is achieved.


Control operation • Microprocess PID control / Auto-tuning / Calibration.

• Chamber supports three different languages : English, Chinese, and Korean.

• CPU logic control system. - Optimum control of temperature / humidity with economical

power consumption.

• Touch Screen Type Display. - 5.7-inch Color LCD display with interactive input system.

(only floor type) : Easily visible set value: set point (SP) / present value (PV) are also

added on the colorful LED controller. - Temperature & humidity, timer settings, and operation conditions. - Temperature, humidity, and other operating parameters can be

recorded using a chart recorder.


Description TH-CR-270Programmable pattern capacity 120

Pattern repeat time 999

Max. segments per a pattern 100

Available max. segments* 1200

Programmable process time per a segment 0 to 99 hr 59 min

* Even though the max. segments per a pattern are 100, available total segments are up to 1200 not 12000, so you need to arrange the number of segment and patterns properly.

• Computer interface. - Software provided. - Save data in excel format. - Storage of program information, backup of value settings /

recovery, and temperature / humidity values. - RS-232C port as standard offer. - RS-485 communication port offers connection of a maximum of

9 temperature & humidity chamber units to one PC. (optional)

Safety functions • Leakage breaker for power supply. • Over current protection. • Over heat protection. • Automatic shut off after overheat alarm. • Low and empty water level alarm. • Door opening alarm. • Vice lock door closing equipment.

Control Panel

Door Catch & Trim

Air-filter

Operating & Constructional features


143

Clean Temperature & Humidity Chambers Environmental Chambers


Specifications & Ordering Informations (Fingerprint development chamber)

Model TH-CR-270Chamber volume (L / cu ft) 270 / 9.5


Controller Programmable, Touch screen type controller (5.7” Color monitor)Local controller (Fixed - command control)

Temperature

Range (℃ / ℉) -35 to 100 / -31 to 212

Fluctuation 1) (±℃ / ℉) at 40℃ / 60%RH 0.5 / 0.9

Variation 1) (±℃ / ℉) at 40℃ / 60%RH 0.5 / 0.9


Cooling - without humidity (Min.) 65 From 20℃ to -35℃ (68℉ to -31℉)

Humidity

Range (%RH)

50 to 90 at 20℃ (68℉)

40 to 90 at 30℃ (86℉)

35 to 90 at 40~85℃ (104~185℉)

Fluctuation 1) (±%RH) 3

Variation 1) (±%RH) at 60%RH 3

Cleanliness Class 100 (ISO 14644-1)

Refrigeration


Refrigerant R-404A

Capacity (W) 1500


Heater






Material


Exterior Stainless steel #304(Base & Control panels are made of Stainless steel with powder coating)

Insulation Polyurethane

Door Glass wool

*Silicon Free (optional)EPDM for door packing, chamber sealing and tubePoly Urethane for DI water inlet & drainage

Air flow Sirocco fan


Water quality pH6.2 to 7.2 / Electrical conductivity 20㎲ /cm to below

Dimensions(W×D×H)

Interior (mm / inch) 600×700×648 / 23.6×27.6×25.4

Exterior (mm / inch) 1180×1120×1935 / 46.5×44.1×76.2


Net weight (kg / lbs) 400±10 / 881.8±22.0


Interface Port Basically RS-232C [RS-485 [Maximum 9 Units Control] - Optional]

Electrical Requirements (230V, 1ph) 60Hz / 29.0A 50Hz / 29.0A

Cat. No. AAH83011 AAH83012

Electrical Requirements (380V, 3ph) 50Hz / 9.6A

Cat. No. AAH83018

1) Technical data. (according to DIN 12880, IEC 60068)※ Permissible ambient Condition: Temperature 18 to 30℃ (64.4 to 86℉), Maximum relative humidity 85%※ All specifications are under ambient temperature 20℃ (68℉), no load.※ Upon request, other sizes of chambers are available. Please contact with us.

144

Accessories & Options for TH/ TC series

Viewing window • An observation window is only installed in the floor type chambers.

(TH/TC series and TH-CR-270 excludes TH-ICh series) A tempered dual window provides a clear of view of samples

during testing.

Inner door • An inner glass door comes installed with the clean temperature

& humidity chamber for quick viewing of samples and to prevent outside air from flowing in.

(Table top - without hand entry ports.)

Temperature and Humidity recorder • 6-point dot type recorder. • digital display.

Water supply • Water supply system for supplying pure water for humidification. - Maintenance of the water tank can be easily performed from the

front side.

Cable port • A through hole of 50 or 80mm dia. (2.0 or 3.2˝ dia.) is provided on

the wall of chamber to allow electrical cables to be introduced into the chamber. A 50mm hole is provided, maximum two holes (50 or 80mm) are optional.

Water purifier • Water purifier with reverse osmosis membrane. (optional)

Shelf • Wire and perforated type shelves (shelf brackets included) are made of

durable stainless steel. Standard shelves and shelf brackets come standard.

Warning signal light • A malfunction indicator can be placed on the right upper side.

Viewing window Inner door Recorder Warning signal light

Tabletop type chambers (TH-ME / TH-PE / TC-ME series / TH-PF-100)

Cat. No. DescriptionModels

TH-KE/ME/PE TH-PF TC-ME/KEAAA8T504 Portable recorder (6 points) • • •AAA8T506 Portable recorder (Digital, 6 channels) • • •AAA8T540 RS-232C interface converter included a cable (5m / 16.4ft) • • •AAA8T541 RS-485 interface converter included a cable (5m / 16.4ft) • • •AAA8T542 Interface cable (5m / 16.4ft) • • •AAA8T550 Warning signal lamp • • •RTD679 Wire shelf for TH / TC - KE / ME / PE - 025* • - •RTD680 Wire shelf for TH / TC - KE / ME / PE - 065 * • - •RTD681 Wire shelf for TH / TC - KE / ME / PE / PF - 100 * • • •AAA80602-6 Perforated shelf for TH / TC - KE / ME / PE - 025 * • - •AAA80602-7 Perforated shelf for TH / TC - KE / ME / PE - 065 * • - •AAA80602-8 Perforated shelf for TH / TC - KE / ME / PE / PF - 100 * • • •AAA8T612 Cable port (Ø 50mm / 2.0”) for TH / TC - ME / PE Series • • •AAA8T613 Cable port (Ø 80mm / 3.2”) for TH / TC - ME / PE Series • • •AAA8T610 Cable port (Ø 50mm / 2.0”) for TH / TC - KE Series • - •AAA8T611 Cable port (Ø 80mm / 3.2”) for TH / TC - KE Series • - •AAA80631 Stand for TH / TC - KE / ME / PE - 025 • - •AAA80632 Stand for TH / TC - KE / ME / PE - 065 • - •AAA80633 Stand for TH / TC - KE / ME / PE / PF - 100 • • •AAA80634 Two step stand for TH / TC - KE / ME / PE - 025 • - •AAA80635 Two step stand for TH / TC - KE / ME / PE - 065 • - •AAA8T621 Water purifier • • -RTD0794 Humidity sensor • • -CFA1910 Temperature sensor (RTD type) • • •

※ 80mm cable access hole is NOT available for 25L chamber. (TH-ME/PE-25, TC-ME-25)

Wire & Perforated shelves for Tabletop type chambers

ModelsDescription

Included* Maximum Space Dimensions (W×L)TH / TC - KE / ME / PE - 025 2 7 20mm (0.8”) 195×310mm (7.7×12.2”)TH / TC - KE / ME / PE - 065 2 10 20mm (0.8”) 280×360mm (11.0×14.2”)TH / TC - KE / ME / PE / PF - 100 2 10 20mm (0.8”) 330×460mm (13.0×18.1”)

* Only for wire shelf.


145

Accessories & Options for TH/ TC series

Floor type chambers (TH-G / TH-I / TH-TG / TH-ICH / TC-G series)

Cat. No. DescriptionModels

TH-G TH-I TC-G TH-TG TH-ICH TH-CR 270AAA8T500 Recorder (6 points) • • • • • •AAA8T505 Recorder (Digital, 6 channels) • • • • • •AAA8T541 Interface converter included a cable (5m / 16.4ft) • • • • • •AAA8T542 Interface cable (5m / 16.4ft) • • • • • •AAA80550 Warning signal lamp • • • • • •AAA81552 Inner glass door (only for 180L chambers) • • • - - -AAA81551 Inner glass door (only for 270, 300, 408L chambers) • • • - - -EDA8212 Wire shelf for TH / TC - G / I - 180 • • • - - -EDA8213 Wire shelf for TH / TC - G / I - 300 • • • - - -EDA8214 Wire shelf for TH / TC - G / I - 408 • • • - - -EDA8215 Wire shelf for TH / TC - G - 800 • - - - - -EDA8216 Wire shelf for TH / TC - G - 1000, 1500 • - - - - -RTD1195 Wire shelf for TH-TG-180 - - - • - -RTD1196 Wire shelf for TH-TG / ICH-300 - - - • • -RTD1197 Wire shelf for TH-TG-408 - - - • - -RTD1198 Wire shelf for TH-TG / ICH-800 - - - • • -RTD1199 Wire shelf for TH-TG-1000, 1500 - - - • - -STT1040 Wire shelf for TH-CR-270 * - - - - - •AAA80602-1 Perforated shelf for TH / TC - G / I - 180 • • • - - -AAA80602-2 Perforated shelf for TH / TC - G / I - 300 • • • - - -AAA80602-3 Perforated shelf for TH / TC - G / I - 408 • • • - - -AAA80602-4 Perforated shelf for TH / TC - G - 800 • - - - - -AAA80602-5 Perforated shelf for TH / TC - G - 1000 , 1500 • - - - - -AAA80604-1 Perforated shelf for TH-TG-180 - - - • - -AAA80604-2 Perforated shelf for TH-TG / ICH-300 - - - • • -AAA80604-3 Perforated shelf for TH-TG-408 - - - • - -AAA80604-4 Perforated shelf for TH-TG / ICH-800 - - - • • -AAA80604-5 Perforated shelf for TH-TG-1000 / 1500 - - - • - -AAA80630-1 Perforated shelf for TH-CR-270 * - - - - - •AAA8T610 Cable port (Ø 50mm / 2.0”) • • • • • •AAA8T611 Cable port (Ø 80mm / 3.2”) • • • • • •AAA8T621 Water purifier • • - • • •AAA80622 Water cartridge tank • • - • • •RTD0794 Humidity sensor • • - • • •CFA1185 Temperature sensor (RTD type) • • • • • •RTD1190 Fluorescent Lamp(Cool White) for TH-ICH-300 - - - - • -RTD1191 Fluorescent Lamp(Cool White) for TH-ICH-800 - - - - • -RTD1188 UVA Lamp for TH-ICH-300 - - - - • -RTD1189 UVA Lamp for TH-ICH-800 - - - - • -AAA80680 THE-680 UV Sensor TH-ICH - - - - • -AAA80681 THE-681 Illumination Sensor for TH-ICH - - - - • -EDA9175 ULPA filter (optional) - - - - - •EDA9184 HEPA filter (1EA included) - - - - - •AAA80661 Door lock device - - - • • -AAA80620 Direct water system - - - • • -

Wire & Perforated shelves for Floor type chambers

ModelsDescription

Included* Maximum Space Dimensions (W×L)

TH / TC - G / I - 180 2 9 40mm (1.6”) 463×518mm (17.2×20.4”)

TH / TC - G / I - 300 2 10 40mm (1.6”) 518×558mm (20.4×22.0”)

TH / TC - G / I - 408 2 10 40mm (1.6”) 560×740mm (22.0×29.1”)

TH / TC - G / I - 800 2 14 40mm (1.6”) 750×960mm (30.0×37.8”)

TH / TC - G / I - 1000, 1500 2 14 40mm (1.6”) 950×960mm (37.4×37.8”)

TH-TG-180 2 7 60mm (2.4”) 458×608 (18×23.9)

TH-TG / ICH-300 2 8 60mm (2.4”) 708×608 (27.9×23.9)

TH-TG-408 2 8 60mm (2.4”) 708×808 (27.9×31.8)

TH-TG / ICH-800 2 17 60mm (2.4”) 708×718 (27.9×28.3)

TH-TG-1000, 1500 2 17 60mm (2.4”) 1008×708 (39.7×27.9)

TH-CR-270 2 10 40mm (1.6”) 640×558mm (25.2×22.0”)

* Only for wire shelf.※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific requirements. Contact us for details.


146


GC-1000TLH


Please visit .comFor further information on Jeio Tech´s Temperature Chamber products Information is readily available on our website.

147


Operating features • +5℃ to 50℃ (lamp off ) / 10℃ to 50℃. (lamp on)

• Max. to 35,000Lux for GC-1000.

• Max. to 20,000Lux for GC-300 series.

• 40 to 80% RH for GC-300TLH. (at 20~35℃) 50 to 90% RH for GC-1000TLH. (at 20~35℃)

• 300 to 5,000ppm CO2 control. (optional)

• Microprocessor PID control / Auto-tuning / Calibration.

• Digital timer: 1 min to 99 hr 59 min.

• Over-temperature limit / Door open alarm.

• 10 step programmable temperature, humidity, and illumination profiles and repeat the steps up to 999 cycles. (self-testing)

Constructional features • High quality #304 grade stainless steel interior and dirt repellent

powder coated exterior surface.

• User-friendly door system. - Silicone packing for keep inner chamber perfectly. - External door with magnetic sealing for dual airtight. - Smoothly open to minimize damage of samples.

• Wide inner tempered glass door provides a full view of the samples.

- A tempered window provides a clear view of your specimen during testing.

• Powerful air circulator for smooth airflow. - Air flow system very efficient for plant growth. - One propeller for GC-1000TLH / tangent blower and a sirocco

fan for GC-300 series.

• High frequency electronic ballast lamps. - Reinforced Blue and Red spectrums lighting system for plant

photosynthesis. - Economical with stable light and long life span. - Easy-to change bulbs.

• Heat rise restraint. - Unique construction to minimize the heat from rising due to the

luminous light source. - Designed to exhaust the heated air through the upper holes.

(only for GC-1000TLH)



• Casters for easy mobility when installing or moving environmental testing chamber.

• Electronic humidity sensor is fast acting and easy to calibrate.

• Dual type water level sensor.

• Adjustable water tank positions. (only for GC-300TLH)

• Removable shelving and rounded inner chamber corners for easy cleaning.

Safety functions • Leakage breaker for power supply. • Over current protection. • Over heat protection with alarm. • Door opening alarm. • Low and empty water level alarm. (TLH models only)

Enough capacity, maximum 1000L to satisfy the user's plant growth needs.User-friendly programmable logic microprocessor, streamlined design, with optimized air flow and temperature flexibility.

Temperature setting graph

* 00:00 time value setting for the step 10 makes total number of step is 9 as the above graph.

Efficient airflow for plant growth


148


GC-300 lamp arrangement GC-1000 lamp arrangement

Lamps setting for GC-300

No. Lux (lx) Set valueson display Lamp diagram

1 1,500 0000 010 22 3,500 0000 101 1,33 5,500 0000 111 1,2,34 6,000 0101 010 2,4,65 8,000 0101 101 1,3,4,66 10,000 1010 010 2,5,77 12,000 1010 101 1,3,5,78 14,000 1111 010 2,4,5,6,79 17,000 1111 101 1,3,4,5,6,710 20,000 1111 111 1,2,3,4,5,6,7

※ Above the set values are measured at the center of chamber toward upside.

Lamps setting for GC-1000

No. Lux (lx) Set valueson display Lamp diagram

1 5,000 0101 000 4,6 (or 5,7)2 7,500 0000 010 23 9,500 1111 000 4,5,6,74 12,500 0101 010 2 with 4,6 (or 5,7)5 15,000 0000 101 1,36 18,500 1111 010 2,4,5,6,77 21,000 0101 101 1,3 with 4,6 (or 5,7)8 24,000 0000 111 1,2,39 28,000 1111 101 1,3,4,5,6,710 31,500 0101 111 1,2,3 with 4,6 (or 5,7) 11 35,000 1111 111 1,2,3,4,5,6,7


Model GC-300TL GC-300TLH GC-1000TLHChamber volume (L / cu ft) 300 / 10.6 1000 / 35.3Control system Microprocessor PID controller

Temperature

Range (℃ / ℉)

5 to 50 / 41 to 122 - Lamp off 10 to 50 / 50 to 122 - Lamp on

20 to 50 / 68 to 122 - with humidity

Fluctuation (±℃ / ℉) at 25℃ 0.1 / 0.18 - without humidity

Variation (±℃ / ℉) at 25℃ 0.8 / 1.43 - without humidity

Illumination

Range (Lux) 0 to 20,000 0 to 35,000Control (steps) 10 11

Lamp Fl lamp (32W×18EA)FL lamp (32W×16EA)

Metal lamp (400W×3EA)

HumidityRange (RH %) -

40~80 at 20~35℃ 50~90 at 20~35℃

70~90 at 36~50℃ 60~90 at 36~50℃

Fluctuation (±RH)at 60% RH - 3

Co2(Optional)Range (ppm) 300 to 5,000Sensor NDIR CO2 sensor

Refrigerant (HP) 1/2 3/4Temp. heater power (W) 750×2EA 1,500×2EAHumid. heater power (W) - 1300 1500

Dimensions(W×D×H)

Interior (mm / inch) 510×540×1100 / 20.0×21.3×43.3 1200×800×1080 / 47.2×31.5×42.5Exterior (mm / inch) 700×805×1900 / 27.6×30.1×74.8 1410×1070×2150 / 55.5×42.1×84.7Net weight (kg / lbs) 250 / 551.2 550 / 1212.5

Electrical Requirements (230V) 60Hz / 12.5A 50Hz / 12.5A 60Hz / 16.0A 50Hz / 16.0A 60Hz / 30.0A 50Hz / 30.0A Cat. No. AAHA1011 AAHA1012 AAHA1021 AAHA1022 AAHA1031 AAHA1032

Lamps settingControl illumination values with the below lamp setting arrangements.

149

Accessories & Options for GC series

Wire Shelves

Cat. No.Description

ModelsIncluded Maximum Dimensions (W×L)

EDA8220 3 15 466×490mm (18.3×19.3”) GC-300TLGC-300TLH

EDA8222 6 30 770×580mm (30.3×22.8”) GC-1000TLH

Perforated Shelves

Cat. No.Description

ModelsIncluded Maximum Dimensions (W×L)

AAAA1511 - 15 466×490mm (18.3×19.3”) GC-300TLGC-300TLH

AAAA1512 - 30 770×580mm (30.3×22.8”) GC-1000TLH

Recorder

Models Description Cat. No.All GC series Recorder (6 points) AAA8T500

CO2 Control System

Models Description Cat. No.All GC series CO2 control system AAAA1521

※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specifi c requirements. Contact us for details.

Wire shelves Perforated shelves

recorder CO 2 Sensor


Flask Supports.Ultrasonic Cleaners.Magnetic Drives.

Other Products

General ApplicationsFlask Supports - Concave recessed, secure, and safe multi-volume flask holder.

Ultrasonic Cleaners- For cleaning laboratory, medical instruments/industrial micro goods/glasses, jewels.

Magnetic Drives - Blends, Biotech, Catalyst preparation, Food products, Fuels, Liquids, Solvents, Lacquers, Multiphase catalyic

reactions, Oils, Synthetic materials, Specialty chemicals, Polymers, Plymers, Slurries, Starches, Pulp and paper, Particle synthesis.

It's concave recessed, secure, and safe multi-volume flask holder.Convenient grip for easy carryingNoticeable name tag for classificationMulti-purpose holder also is able to hold ice.

Features • Flask size : 100ml, 250ml, 500ml, 1000ml, 2000ml • Chemically resistant to various organic solvents. • Material : PP (Polypropylene)

• Heat Resistance : -30℃ ~ +121℃ -22℉ ~ +249.8℉


Model FT 010 13 FT 010 34 FT 025 12 FT 025 23Hole Capacity (ml) 100 100 250 250Hole (Dia, ×H) (mm / inch) 70×91 / 2.76×3.58 70×91 / 2.76×3.58 98×122 / 3.86×4.8 98×122 / 3.86×4.8

Dimensions (W×D×H) (mm / inch)

310×100×100 / 12.2×3.94×3.94

384×265×98/ 15.12×10.43×3.86

280×125×130/ 11.02×4.92×5.12

389×239×130/ 15.31×9.41×5.12

Cat. No. AAA23706 AAA23701 AAA23707 AAA23702

Model FT 050 12 FT 100 12 FT 200 12Capacity (ml) 500 1000 2000Hole (Dia, ×H) (mm / inch) 121×128 / 4.76×5.04 148×156 / 5.83×6.14 183×188 / 7.2×7.4

Dimensions (W×D×H) (mm / inch)

360×146×135/ 14.17×5.75×5.31

415×192×165/ 16.34×7.56×6.5

503×223×199/ 19.8×8.78×7.83

Cat. No. AAA23703 AAA23704 AAA23705

Flask SupportsOther Products

152

Ultrasonic Cleaners

UC-10 included cover and basket

UC-02 / UC-20

US-20 included cover and basket / Basket for UC/US series

Other Products

Please visit .comFor further information on Jeio Tech´s Ultrasonic Cleaner products Information is readily available on our website.

153 Features for UC series (ABS / PBT housing, SUS tank)

• Durable leakproof ABS / PBT housing and cover with 304 stainless steel tanks. • Maximum heater temperature is 70℃. (only 50℃ for UC-02)

• Digital LED display using splash-proof keypads: timer (1 to 99 min), temperature monitor. (UC-02 is only On/Off )

• High-frequency 40 kHz sound waves provide greater cleaning power and increased reliability. • Multiple frequency on 3 stages for both gentle cleaning and intensive cleaning. (without UC-02)


Model UC - 02 UC - 10 [10P] UC - 20 [20P]Bath volume (L / cu ft) 2.0 / 0.07 10.0 / 0.35 20.0 / 0.70

Temperature range (℃ / ℉)Amb. ~ to 50Amb. ~ to 122 Amb. ~ to 70 / Amb. ~ to 158

Ultrasonic power (W) 70 200 [300] 400 [500]

Dimensions

Bath internal(W×L , D) (mm / inch)

142×132, 104/ 5.6×5.2, 4.1

300×240, 150/ 11.8×9.4, 5.9

495×292, 150/ 19.5×11.5, 5.9


290×210×200/ 11.4×8.4×7.9

490×368×297/ 19.3×14.5×11.7

721×451×297/ 28.4×17.8×11.7

Net weight (kg / lbs) 2.0 / 4.4 11.0 / 24.3 17.0 / 37.5Electrical Requirements (230V, 50 / 60Hz) 0.3A 0.9A (1.3A) 1.7A (2.2A)

Cat. No. BDH53015 BDH53045 (BDH53055) BDH53065 (BDH53075)

Electrical Requirements (120V, 50 / 60Hz) 0.6A 1.7A (2.5A) 3.3A (4.2A)

Cat. No. BDH53013 BDH53043 (BDH53053) BDH53063 (BDH53073)

Features for US series (Steel housing, SUS tank)

• All parts are made of durable 304 stainless steel tanks, cover and powder coating steel housing. • Maximum heater temperature is 70℃. • Digital LED display using splash-proof keypads: timer (1 to 99 min), temperature monitor. • High-frequency 40 kHz sound waves provide greater cleaning power and increased reliability. • Multiple frequency on 3 stages for both gentle cleaning and intensive cleaning.


Model US-05 (05P) US-10 (10P) US-20 (20P)Bath volume (L / cu ft) 5.7 / 0.20 10.0 / 0.35 20.0 / 0.70Temperature range (℃ / ℉) Amb. ~ to 70 / Amb. w~ to 158Ultrasonic power (W) 150 [200] 200 [300] 400 [500]

Dimensions

Bath internal(W×L, D) (mm / inch)

300×150, 150/ 11.8×5.9, 5.9

300×240, 150/ 11.8×9.4, 5.9

495×292, 150/ 19.5×11.5, 5.9


380×236×300/ 15.0×9.3×11.8

360×300×300/ 14.2×11.8×11.8

565×360×300/ 22.2×14.2×11.8

Net weight (kg / lbs) 9.0 / 19.8 12.5 / 27.6 19.0 / 41.9

Electrical Requirements (230V, 50 / 60Hz) 0.7A (0.9A) 0.9A (1.3A) 1.7A (2.2A)

Cat. No. BDH53125 (BDH53135) BDH53145 (BDH53155) BDH53165 (BDH53175)

Electrical Requirements (120V, 50 / 60Hz) 1.3A (1.7A) 1.7A (2.5A) 3.3A (4.2A)

Cat. No. BDH53126 (BDH53136) BDH53146 (BDH53156) BDH53166 (BDH53176)

Ultrasonic Cleaners

Industrial B.L.T type ultrasonic transducer (Bolt Clamped Langevin Type Transducer) generates high-frequency sound waves that provide maximum cleaning power. UC/ US-P types are increased the frequency to improve cleaning ability.

Aggressive cleaning ability in a variety of sizes!

Other Products

Included Accessories • Cover • 304 stainless steel wire basket

Included Accessories • Cover • 304 stainless steel wire basket

154

Magnetic Drives

Magnetic drives are designed for agitating a fully vacuumed flask. Multi-functional easy to replace impeller.

Feature • Use of rare-earth elements which is Neodymium (Nd),

Samarium (Sm-Co) magnet. • High-speed rpm, vibration free. • Specifically designed with permanent magnets which has a

dynamic torque rating. • Small size and powerful rotating magnetic drive is useful both for

laboratory and manufacturing applications.

Magnetic Drive

Application of Magnetic Drive

Other Products

Specifications

Model MD-T6-24 MD-T6-29 MD-T6-34Ground joint 24 / 40 29 / 42 34 / 45

Material Body / Housing SUS316L / CR-PLATE

Bushing / Seal PTFE / Viton

Driving

Vacuum Max. 1×10-4 mmHg

Pressure Max. 5kg / cm2

Temp Max. 70℃ (without cooling), Max. 300℃ (with cooling)

Shaft size (Ø, mm) Ø8

Cooling in / out size (Ø, mm) Ø3.2

Dimension (Ø×L, mm) Ø50×200

Weight (kg / lbs) 1.02 / 2.25 1.04 / 2.29 1.08 / 2.38

Cat. No. BEA511001 BEA511002 BEA511003

Lab Companion2011 - 12 Product Catalog

Appendix

156

Chemicals- Periodic Table

FranciumRadium

RutherfordiumDubnium

SeaborgiumBohrium

HassiumMeitnerium

UnunniliumUnununium

UnunbiumUnunquadium

UnunhexiumUnunoctium

87 (223)

88 (226)

104 (261)

105 (262)

106 (266)

107 (264)

108(277)109

(268)110

(281)111

(272)112

(285)114

(289)116

(289)118

(293)

FrRa

Ac-LrRf

DbSg

BhHs

MUun

UuuUub

UuqUuh

Uuo89-103

CesiumBarium

HafniumTantalum

TungstenRhenium

Osmiumlridium

PlatinumGold

MercuryThallium

LeadBismuth

PoloniumAstatine

Radon

55 132.91

56 137.33

72 178.49

73 180.95

74 183.84

75 186.21

76 190.23

77 192.22

78 195.08

79 196.97

80 200.59

81 204.38

82 207.20

83 208.98

84 (209)

85 (210)

86 (222)

CsBa

La-LuHf

TaW

ReO

sIr

PtAu

HgTl

PbBi

PoAt

Rn

RubidiumStrontium

yttriumZirconium

NiobiumMolybdenum

TechnetiumRuthenium

RhodiumPalladium

SilverCadmium

IndiumTin

AntimonyTellurium

IodineXenon

37 85.468

38 87.62

39 88.906

40 91.224

41 92.906

42 95.94

43 (98)

44 101.07

45 102.91

46 106.42

47 107.87

48 112.41

49 114.82

50 118.71

51 121.76

52 127.60

53 126.90

54 131.29

RbSr

YZr

NbM

oTc

RuRh

PdAg

CdIn

SnSb

TeI

Xe

PotassiumCalcium

ScandiumTitanium

VanadiumChromium

Manganeselrin

CobaltNickel

CopperZinc

GalliumGermanium

ArsenicSelenium

BromineKrypton

19 39.098

20 40.078

21 44.956

22 47.867

23 50.942

24 51.996

25 54.938

26 55.845

27 58.933

28 58.693

29 63.546

30 65.39

31 69.723

32 72.64

33 72.922

34 78.96

35 79.904

36 83.80

KCa

ScTi

VCr

Mn

FeCo

NiCu

ZnGa

GeAs

SeBr

Kr

SodiumMagnesium

3 IIIB

4 IVB

5 VB

6 VIIB

7 VIIB

89

1011

IB12

IBAluminum

SiliconPhosphorus

SulfurChlorine

Argon

11 22.990

12 24.305

13 26.982

14 20.086

15 30.974

16 32.065

17 35.453

18 39.948

NaM

gAl

SiP

SCl

Ar

LithiumBeryllium

BprpnCarbon

NitrogenOxygen

FluorineNeon

3 6.941

4 9.0122

5 10.811

6 12.011

7 14.007

8 15.999

9 18.998

10 20.180

LiBe

BC

NO

FNe

Hydrogen2

IIA13 IIIA

14 IVA15

VA16 VIA

17 VIIA

Helium

1 1.0079

2 4.0026

1 IA

18 VIIA

HH

e

57-71

ActiniumThorium

ProtactiniumUranium

NeptuniumPlutonium

AmerciumCurium

BerkeliumCalifornium

EinsteiniumFermium

MendeleviumNobelium

Lawrencium

89 (227)

90 232.04

91 231.04

92 238.03

93 (237)

94 (244)

95 (243)

96 (247)

97 (247)

98 (251)

99 (252)

100 (257)

101 (258)

102 (259)

103 (262)

AcTh

PaU

NpPu

AmCm

BkCf

EsFm

Md

NoLr

LanthanumCerium

PraseodymiumNeodymium

PromethiumSamarium

EuropiumGadolinium

TerbiumDysprosium

HolmiumErbium

ThuliumYtterbium

Lutetium

57 138.91

58 140.12

59 140.91

60 144.24

61 (145)

62 150.36

63 151.96

64 157.25

65 158.93

66 162.50

67 164.93

68 167.26

69 168.93

70 173.04

71 174.97

LaCe

PrNd

PmSm

EuGd

TbDy

HoEr

TmYb

Lu

VIIIB

LANTHANIDE SERIES

group

Period1

ACTINIDE SERIES

METAL

ALKALI METAL

ALKALINE EARTH METAL

TRANSITION METAL

LANTHANIDE SERIES

ACTINIDE SERIES

SEMIM

ETAL

NONMETAL

HALOGEN

NOBLE GAS

PERIODIC TABLE OF THE ELEMENTS KEY

STANDARD STATE

HeBr

LiTc

GASSOLID

SYNTHETICLIQUID

B5

10.81113 IIIA

Boron

GROUP IU PAC

ATOMIC NUM

BER

SYMBOL

ELEMENT NAM

E

GROUP GAS

RELATIVE ATOMIC M

ASSTechnical DataAppendix

157

Formulas, Conversions and Engineering Constants Conversion Factors

To Convert To... Multiply... By...Atmospheres (atm) Bar 0.9869

Atmospheres (atm) Inches Mercury (in Hg) 0.03342

Atmospheres (atm) Pounds/square inch (psi) 0.06805

Atmospheres (atm) Torr 0.001316

Bar Atmospheres (atm) 1.0133

Bar Pounds/square inch (psl) 0.06895

British Thermal Units (BTU) Joules (J) 0.000948

British Thermal Units (BTU) Kilowatt-hours (kWH) 3412

British Thermal Units (BTU) Watt-hours (WH) 3.412

British Thermal Units/hour (BTU/h) Kilocalories/hour (kcal/h) 3.969

British Thermal Units/hour (BTU/h) watts (W) 3.412

British Thermal Units+inches hour-square foot-℉

(BTU+in)(h-ft2-℉) watts/meter-℃ (W/m-℃) 6.933

British Thermal Units/pound (BTU/Ib) Kilojoules/kilogram (kJ/kg) 0.4299

British Thermal Units/pound-℉ (BTU/lb-℉) Kllojoules/kilogram-℃ (kJ/Kg-℃) 0.2388

Calories (cal) Joules (J) 0.2388

Centimeters (cm) Feet (ft) 30.48

Centimeters (cm) Inches (in) 2.54

Centimeters/second (cm/s) Feet/minute (FPM) 0.508

Cubic Centimeters (cm3or cc) Cubic feet (ft3) 28.320

Cubic Centimeters (cm3or cc) Cubic inches (in3) 16.39

Cubic Centimeters (cm3or cc) Milliliters (ml) 1.0

Cubic feet (ft3) Cubic meters (m3) 35.32

Cubic feet (ft3) Gallons, U.S. (gal) 0.1337

Cubic feet (ft3) Liters (I) 0.03532

Cubic feet/minute (CFM) Cubic meters/hour (m3/h) 0.5885

Cubic feet/minute (CFM) Cubic meters/second (m3/s) 2119

Cubic feet/minute (CFM) Liters/second (I/s) 2.119

Cubic inches (in3) Cubic centimeters (cm3 or cc) 0.061

Cubic meters (m3) Gallons, U.S. (gal) 0.003785

Cubic meters (m3) Liters (I) 0.001

Cubic meters (m3) Cubic feet (ft3) 0.02832

Cubic meters/hour (m3/h) Cubic feet/minute (CFM) 1.699

Cubic meters/hour (m3/h) Gallons/minute (GPM) 0.2271

Cubic meters/second (m3/s) Cubic feet/minute (CFM) 0.000472

Feet (ft) Centimeters (cm) 0.03281

Feet (ft) Meters (m) 3.281

Feet/minute (FPM) Centimeters/second (cm/s) 1.969

Feet/minute (FPM) Meters/second (m/s) 196.9

Gallons, imperial Gallons, U.S. (gal) 0.8327

Gallons, U.S (gal) Cubic feet (ft3) 7.481

Gallons, U.S (gal) Cubic meters (m3) 264.2

Gallons, U.S (gal) Gallons, imperial 1.201

Gallons, U.S (gal) Liters (I) 0.2642

Gallons/minute (gpm) Cubic meters/hour (m3/h) 4.403

Gallons/minute (gpm) Liters/second (l/s) 15.85

Grams (g) Ounces (oz) 28.35

Grams (g) Pounds (lb) 453.6

Grams/cubic centimeter (g/cm3) Kilograms/cubic meter (kg/m3) 0.001

Grams/cubic centimeter (g/cm3) Pounds/cubic fool (lb/ft3) 0.01602

Grams/cubic centimeter (g/cm3) Pounds/cubic inch (lb/in3) 27.68

Inches (in) Centimeters (cm) 0.3937

Inches (in) Millimeters (mm) 0.03937

Inches Mercury (in Hg) Atmospheres (atm) 29.92

Inches Mercury (in Hg) Torr 25.4

Technical DataAppendix

158


To Convert To... Multiply... By...Joules (J) British Thermal Units (BTU) 1055

Joules (J) Calories (cal) 4.187

Joules (J) Watt-hours (WH) 36.00

Joules/second (J/s) British Thermal Units/hour (BTU/h) 0.2931

Joules/second (J/s) Watts (W) 1

Kilocalories/hour (kcal/h) BTU/hour (BTU/h) 0.252

Kilograms (kg) Pounds (lb) 0.4536

Kilograms/cubic meter (kg/m3) Grams/cubic centimeter (g/cm3) 1000

Kilograms/cubic meter (kg/m3) Pounds/cubic foot (lb/ft3) 16.02

Kilograms/square centimeter (kg/cm2) Pounds/square inch (psi) 0.07031

kilojoules (kJ) Watt-hours (WH) 3.6

Kilojoules/kilogram (kJ/kg) British Thermal Units/pound (BTU/lb) 2.326

Kilojoules/kilogram-℃ (kJ/kg-℃) British Thermal Units/Pound-℉ (BTU/lb-℉) 4.187

Kilometers/hour (km/h) Miles/hour (MPH) 1.609

Kilopascals (kPa) Pounds/square inch (p8l) 6.895

Kilowatts (kW) British Thermal Units/hour (BTU/h) 0.0002931

Kilowatts (kW) Watts (W) 0.001

Kilowatt-hours (kWH) British Thermal Units (BTU) 0.0002931

Kilowatt-hours (kWH) Watt-hours (WH) 0.001

Liters (I) Cubic Feet (ft3) 28.32

Liters (I) Cubic Meters (m3) 1000

Liters (I) Gallons, U.S. (gal) 3.785

Liters/second (I/s) Cubic feet/minute (CFM) 0.4719

Liters/second (I/s) Gallons/minute (GPM) 0.06309

Meters (m) Feet (ft) 0.3048

Meters/second (m/s) Feet/minute (FPM) 0.00508

Miles/hour (MPH) Kilometers/hour (km/h) 0.6215

Millimrters (mm) Inches (in) 25.4

Newtons/square meter (N/m2) Pounds/square inch (psi) 6.895

Ounces (oz) Grams (g) 0.035274

Pounds (lb) Grams (g) 0.002205

Pounds (lb) Kilograms (kg) 2.205

Pounds/cubic foot (lb/ft3) Grams/cubic centimeter (g/cm3) 62.43

Pounds/cubic foot (lb/ft3) Kilograms/cubic meter (kg/m3) 0.06243

Pounds/cubic inch (lb/in3) Grams/cubic centimeter (g/cm3) 0.03613

Pounds/square inch (psi) Bar 14.504

Pounds/square inch (psi) Kilograms/square centimeter (kg/cm2) 14.22

Pounds/square inch (psi) Kilopascals (kPa) 0.145

Pounds/square inch (psi) Newtons/square meter (N/m2) 0.000145

Square centimeters (cm2) square feel (ft2) 929

Square centimeters (cm2) Square inches (in2) 6.452

Square feet (tt2) Square centimeters (cm2) 0.001076

Square feet (tt2) Square meters (m2) 10.76

Square inches (in2) Square centimeters (cm2) 0.155

Square meters (m2) Square feet (ft2) 0.0929

Torr Inches Mercury (in Hg) 0.03937

Torr Pounds/square inch (psi) 51.71

Watts (W) British Thormal Units/hour (BTU/h) 0.2931

Watts (W) Joules/second (J/s) 1

Watt-hours (WH) British Thermal Units (BTU) 0.2931

Watt-hours (WH) Joules (J) 0.0002778

Watt-hours (WH) Kilojoules (kJ) 0.2778

Watts/meter-℃ (W/m-℃) British Thermal Units incheshour-square foot-℉

(BTU+in)(h-ft2-℉) 0.1442

Watts/square centimeter (W/cm2) Watts/square inch (W/in2) 0.155

Watts/square inch (W/in2) Watts/square centimeter (W/cm2) 6.452

159

Formulas, Conversions and Engineering Constants


E

WR ER

E2

RE2

W

WI2

WI

WR

WE

EIEI

I2R

IR(Volts)

I(Amps)

R(Ohms)

W(Watts)

Volts Volts = Watts x Ohms

Volts = Watts Amperes

Volts = Amperes x Ohms

Amperes Amperes = Volts Ohms

Amperes = Watts Volts

Amperes = Watts Ohms

Watts Watts = Volts2

Ohms

Watts = Amperes2 x Ohms

Watts = Volts x Amperes

Wattage varies directly as ratio of voltages squared.

W2 = W1 E2 2

E1

3 Phase Amperes = Total Watts Volts x 1.732

Ohms Ohms = Volts Amperes

Ohms = Volts2 Watts

Ohms = Watts Amperes2

( )x

160

INDEX

AAir-Jacketed Incubators 44

Aspirators 68

Electric Water-Jet type 68

BBaths & Circulators 8

-Accessories 19-21

Cold Trap 18

Economy Heating 10

General Purpose Heating 12

Heating Bath Circulators 15

Refrigerated & Heating Bath Circulators 16

Shaking Heating 13

Ultrasonic Cleaning 152-153

Viscometer Heating 14

Benchtop

Baths 10-13

Baths & Circulators 10-16

Circulators 15

Clean Benches (Vertical type Laminar Flow) 26

Desiccators (Cubic & Round) 23-24

Ductless Fume Hood 31

Incubators 40-51

Ovens 58-66

Overhead 106-107

Pumps 68-69

Shakers 88-96

Stirrers 104-107

Temperature (& Humidity) Chambers 144-145

Ultrasonic Cleaners 152-153

Vortex Mixer 108

CCell Culture

Incubators 40-51

Incubated & Refrigerated & Illuminated Shakers 46-51

Low Temperature Incubators 42-45

Low Temperature Personal Incubators 45

Laboratory Refrigerators 82-84

Shaker 88-96

Stirrers, Stirrering Hot Plates, Hot Plates 104-108

Vortex Mixer 23

Chambers

Environmental 114-149

Incubators 40-51

Laboratory Refrigerators & Freezers 82-84

Low Temperature 121-122

Ovens 58-66

Plant Growth 146-149

Temperature & Humidity 114-149

Clean Temperature & Humidity 140-143

Circulators

Heating Bath 10-13

Refrigerated & Heating Bath 15-16

Clamps

Flask 19, 97

Separating Funnel 19, 97

for Overhead 111

Clean Benches

Vertical type Clean Benches 26

Cleaners

Ultrasonic 152-153

Cold Trap Baths (related with Vacuum Ovens) 18

Cooling Circulators 16-17

Covers for Baths

-Accessories 20

Chillers 72-77

-Accessories 78-79

161

INDEX

DDrying

Forced (Mechanical) Convection Ovens - Economic type 62

Gravity (Natural) Convection Ovens - Economic type 64

Forced (Mechanical) Convection Ovens 58-61

Gravity (Natural) Convection Ovens 63

Vacuum Ovens 66

Desiccators (Cubic & Round) 23-24

-Accessories 23


-Accessories 33

EEnclosure


Environmental, Environmental Chambers

Incubators 40-51

Laboratory Refrigerators & Freezers 82-84



Ovens 58-66

Plant Growth Chambers 146-149

Temperature & Humidity Chambers 114-149

Benchtop (Tabletop) type 128-139

Floor type 66

Cleaned (HEPA Filtered) Floor type 118-121

Vacuum Ovens 51

FFingerprint Development Chamber 137-139

-Accessories 144

Forced Convection

Compact Incubators 45

Incubators 40-51

Ovens (Economy) 62

Ovens (General Purpose) 58-61

Flask Support 151

GGravity Convection

Incubators 40-51

Ovens (Economy) 64

Ovens (General Purpose) 63, 66

Growth Chambers

Plant 146-149

HHeating

Baths 10-13

Bath Circulators 15-16

Ovens 58-66

Incubators 40-51

Incubated Shakers 46-51

HEPA-Filtered

Laminar Flow (Vertical type) 26



PCR Workstations 34-37

-Accessories 37

Hoods


- Accessories 29

Vertical type Laminar Flow 26

Ductless fume hood 31

- Accessories 33

Humidity



PCR Workstations 34-37

-Accessories 37

UV Sterilization cabinet 34-37

-Accessories 37

162

IIlluminated

Incubated & Refrigerated Shakers 46-51


Incubators

-Accessories 52-55

Air-Jacketed 44

Compact (Personal) 45

Economy 41

General Purpose 40


Plant Growth 146-149

Shaking 46-51

LLaboratory Refrigerators & Freezers

-Accessories 69

General Purpose Laboratory Refrigerators 82-84

Pharmacy Refrigerator 82-84

General Purpose Laboratory Freezer 82-84

Low Temperature

Circulation Baths 16

Incubators 42-45


Recirculating Coolers 74-77

Temperature Chamber 121-122133-135

MMagnetic Stirrers (MS-B/G/M) 104-105

-Accessories 109

Magnetic Drive 154

Mechanical Convection

Compact Incubators 45

Incubators 42-43

Ovens (Economy) 62

Ovens (General Purpose) 64

NNatural Convection 64

Incubators 40-51

Ovens (Economy) 64

Ovens (General Purpose) 63

OOpen-Rings Covers for Water Baths 20

Orbital Shaker

Incubating 46-51

Incubating & Refrigerating 46-51

Incubating & Refrigerating & Illuminating 46-51

Open-Air type (Platform) 91-94

Drying

Economy 62, 64

Forced (Mechanical) Convection 58-61

Gravity (Natural) Convection 63

Vacuum 66

Overhead 106-107

-Accessories 110-111

Vortex Mixer 108

-Accessories 109

PPerforated Shelves

for Incubators 52

for Plant Growth Chambers 149

for Ovens 65

for Temperature (& Humidity) Chambers 144-145

Platforms

Dedicated (for Shaking Water Baths) 19

Dedicated (for Shakers) 53

Platform Shakers 97

Universal (for Shaking Water Baths) 19

Universal (for Shakers) 97

Pumps

Rotary Vacuum 69

Rotary Vacuum Pumps 69

INDEX

163

RReciprocating Shakers


Separatory Funnel 96


Heating Baths 15

Recirculating Coolers 72-77

Basic type 78-79

General type

Intelligent type 16

Refrigerated 140-143

Bath Circulators 121-122

Clean Temperature & Humidity Chambers 133-135

Environmental Chambers 46-51

Incubating Shakers 46-51

Incubating & Illuminating Shakers 146-149

Incubating & Illuminating Plant Growth Chambers 121-122

Low Temperature Chambers 133-135


Shakers 46-51


118-120126-127132-136142-143

Rotary Vacuum Pumps 69

SSeparatory Funnel Shakers 96

Shakers

-Accessories 97-99

Incubating 46-51

Incubating & Refrigerating 46-51



Orbital 90-93

Orbital / Reciprocating 92-94

Rocking 95

Reciprocating 92-93

Reciprocating Separatory Funnel 96

Reciprocating Heating Baths 13

Stainless Steel

Flat type Bath Covers 20

Spring Wire Racks for Baths 21

Spring Wire Racks for Shakers1) 95

Test Tube Racks for Baths 19

Test Tube Racks for Shakers1) 99

Stands

for Clean Benches (Table with Casters) 29

for Clean Benches (Basic Table) 29

for Benchtop Temp. & Humid Chambers (1 step) 144

for Benchtop Temp. & Humid Chambers (2 steps) 144

for Ductless Fume Hoods 33

for Laboratory Refrigerators & Freezers

for Overhead Stirrer 85

Stirring 104-107

Sterilization cabinets 34-37

TTable

for Clean Benches (Basic Table) 29

for Clean Benches (Table with Casters) 29

Tabletop

Baths 10-13

Baths & Circulators 15-16

Circulators 15-16

Clean Benches (Vertical type Laminar Flow) 26

Incubators 40-51

Ovens 61-66

Pumps 68-69

Shakers

Stirrers 90-96

Temperature (& Humidity) Chambers 128-139

Ultrasonic Cleaners 152-153

INDEX

164

Temperature Chambers

Cold Chambers 121-122

Growth Chambers 146-149

Incubators 40-51

Ovens 58-66


Benchtop (Tabletop) type 128-139

Floor type 114-127140-143

Cleaned (HEPA Filtered) Floor type 140-143

Tissue Culture

Incubators 40-51


Incubated & Refrigerated Shakers 46-51

Incubated & Refrigerated & Illuminated Shakers 46-51


Low Temperature Personal Incubators 45

Shaker 90-96

Stirrering 104-107

UUltrasonic Cleaners

Steel housing, Stainless Steel tank 152-153

ABS / PST housing, Stainless Steel tank 152-153

Universal Attachments (Utility Carriers) 97

for Shakers

Universal Platform 97

for Shakers (Dual) 19

for Shaking Heating Baths 19

YVacuum

Electric Aspirator 65

Ovens 66

Pumps 68-69

Silicone Gaskets for Vacuum Ovens (OV series) 67

Viton Gaskets for Vacuum Ovens (OV series) 67

Viscosity, Viscometer

Tube Holders 21

Heating Baths 15

Vortex Mixer 108

-Accessories 109

WWater Baths

-Accessories 19-21

Cold Trap 18

Economy 10

General Purpose 12

Heating Circulation 15

Refrigerated & Heating Circulation 15-16

Shaking 13

Ultrasonic Cleaning 152-153

Viscometer 14

Wire Shelves

for Oven 65

for Incubator 54

for Laboratory Refrigerators & Freezers 85

Work Surace for Ductless Fume Hoods 33

1) Need to be installed on an universal platform, which is sold separately.

INDEX

lab companion

Documents

Transcript of lab companion