L280 Series - mueggler.dk · L280 series applies roller type LM guideway on Z-axis which shows...
Transcript of L280 Series - mueggler.dk · L280 series applies roller type LM guideway on Z-axis which shows...
L280 SeriesHYUNDAI WIA CNC Turning Center
L280 series, designed by Hyundai WIA with years of expertise and the latest technology, is a Turning Center that maximizes productivity and performance.
Technical Leader
10″ Standard Long Standard TurnMill
Spindle Bed Turret
● ● ●
● ● ●
● ● ●
MODEL
L280
L280L
L280LM
New Leader in Middle Class to Large CNC Turning Center
L280 Series● Utilizes roller bearings of Ø140 (Ø5.5″) and double angular contact bearings
for the main spindle
● Highly sturdy and reliable servo turret
● Main body designed to achieve high rigidity and accuracy
● A powerful tailstock with a thrust of 7,252 N.m (5,349 lbf.ft)
● Highly efficient SIEMENS 828D (Option)
01 Basic FeaturesThe Best Productivity Popular 10 inch CNC Turning CenterL280 Series
Main SpindleBy enlarging the diameter and thickening the width of the spindle, it has become more rigid. Also, highly precise angular ball bearings help maintain rigidity and precision.
TurretTurret is installed with a 3-piece coupling to ensure high indexing accuracy.
Powerful hydraulic tool clamping enables heavy duty cutting by minimizing the displacement of the tool tip.
GuidewayL280 series applies roller type LM guideway on Z-axis which shows excellent performance in travel. Great reapeatability accuracy makes It suitable for precise machining.
❖ X-axis : Ball Type LM Guide
Ball ScrewLarge diameter ball screws with preloading prevent deformation due to heat. Also double-anchor suppport method improves rigidity.
04
0302
High Precision, High Rigidity All in One StructureThe L280 features a 60° slant bed design which was developed using finite element analysis (FEA) to effectively absorb vibration for stable and precise machining.
01
BallScrewDeviation(Diameter)
Number of Positioning Repeated (Time)
Deviation (μm)
◉ Rapid Travel (X/Z axis) : 25/30 m/min (984/1,181 ipm)
- Compare to Previous Model, rapid traverse rate is improved by 5m/min (197 ipm) : X-axis and 6m/min (236 ipm) : Z-axis
◉ Travel(X/Z axis)
L280 : 200/750mm (7.9″/29.5″) L280L : 200/1,100mm (7.9″/43.3″) L280LM : 220/1,020mm (8.7″/40.2″)
Reductionofnon-cuttingtimebyfastrapidspeed
Basic Features
01
03
04
02
04+
05
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
02 High-Precision SpindleLong Lasting High Accuracy & Excellent PerformanceCNC Turning CenterL280 Series
Main SpindleThe main spindle unit is designed with Ø140 (Ø5.5″) roller bearings and double angular contact bearings to maintain stability during high speed machining.
The unit is able to maintain precision for a long time where the outer bearing part is assembled to the highest precision standards. Also, stable machining is possible by AC motor which controls spindle at constant speed.
(MT#5) Tail Stock
C-Axis ControlC-axis of L280LM can be controlled to 0.001°which makes it possible to machine various shapes.
0.001°
L280 : 570mm L280L/LM : 920mmL280 : 570mm L280L/LM : 920mmTaper : MT#5Diameter : Ø100 (Ø3.9″) Quill Travel : 120 mm (4.7″)
L280 : 570 mm (22.4″) L280L/LM : 920 mm (36.2″)
•The large (MT#5) tail stock ensures high accuracy even during heavy duty cutting.
•The quill travel can be operated by foot pedal, or program.
•The tail stock body can be manually moved by using JOG button or MPG.
SieMenS
22kW[29.5HP] (30min)
Spindle Speed (r/min) Spindle Speed (r/min)
729.5N∙m[538lbf∙ft] (30min)
22[29.5]
729.5[538]
613.5[452.5]
165.5[122]58.9[43.4]
18.5[24.8]
11[14.7]
9[12]
0
22[29.5]
493.2[363.8]
414.7[305.9]
165.5[122]
58.9[43.4]
18.5[24.8]
11[14.7]
9[12]
0
0 0
18.5kW[24.8HP] (Cont.)
22kW[29.5HP] (30min)
18.5kW[24.8HP] (Cont.)
613.5N∙m[452.5lbf∙ft] (Cont.)
33.6kW[45HP] (30min)
Spindle Speed (r/min)
641.4N∙m[473lbf∙ft] (30min)
28kW[37.5HP] (Cont.)534.5N∙m[394.2lbf∙ft] (Cont.)
493.2N∙m[363.8lbf∙ft] (30min)
414.7N∙m[305.9lbf∙ft] (Cont.)
L280/L
L280/280L L280LM
33.6[45]
28[37.5]
500 1,900 2,250
641.4[473]
534.5[394.2]
63.6[47]
3,000
3,000 3,5002,5563381,725228
20[26.8]
33.6kW[45HP] (30min)
Spindle Speed (r/min)
433N∙m[319.4lbf∙ft] (30min)28kW[37.5HP] (Cont.)
360.8N∙m[266lbf∙ft] (Cont.)
L280LM
33.6[45]
28[37.5]
741 2,815 3,407
433[319.4]
360.8[266]
73.6[54.3]
3,500
Power(kW[HP]) Torque(N∙m[lbf∙ft])
Power(kW[HP]) Torque(N∙m[lbf∙ft])
Power(kW[HP]) Torque(N∙m[lbf∙ft])
Power(kW[HP]) Torque(N∙m[lbf∙ft])
22kW[29.5HP] (30min)
Spindle Speed (r/min) Spindle Speed (r/min)
729.5N∙m[538lbf∙ft] (30min)
22[29.5]
729.5[538]
613.5[452.5]
165.5[122]58.9[43.4]
18.5[24.8]
11[14.7]
9[12]
0
22[29.5]
493.2[363.8]
414.7[305.9]
165.5[122]
58.9[43.4]
18.5[24.8]
11[14.7]
9[12]
0
0 0
18.5kW[24.8HP] (Cont.)
22kW[29.5HP] (30min)
18.5kW[24.8HP] (Cont.)
613.5N∙m[452.5lbf∙ft] (Cont.)
33.6kW[45HP] (30min)
Spindle Speed (r/min)
641.4N∙m[473lbf∙ft] (30min)
28kW[37.5HP] (Cont.)534.5N∙m[394.2lbf∙ft] (Cont.)
493.2N∙m[363.8lbf∙ft] (30min)
414.7N∙m[305.9lbf∙ft] (Cont.)
L280/L
L280/280L L280LM
33.6[45]
28[37.5]
500 1,900 2,250
641.4[473]
534.5[394.2]
63.6[47]
3,000
3,000 3,5002,5563381,725228
20[26.8]
33.6kW[45HP] (30min)
Spindle Speed (r/min)
433N∙m[319.4lbf∙ft] (30min)28kW[37.5HP] (Cont.)
360.8N∙m[266lbf∙ft] (Cont.)
L280LM
33.6[45]
28[37.5]
741 2,815 3,407
433[319.4]
360.8[266]
73.6[54.3]
3,500
Power(kW[HP]) Torque(N∙m[lbf∙ft])
Power(kW[HP]) Torque(N∙m[lbf∙ft])
Power(kW[HP]) Torque(N∙m[lbf∙ft])
Power(kW[HP]) Torque(N∙m[lbf∙ft])
FAnUC
06+
07
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Spindle Output/Torque Diagram
Spindle
Continuously variable transmission is possible due to the AC conversion motor. Controlling the spindle at a certain speed is possible which is provided as a standard function.
The 1PH8 Series Motor is a high quality and performance motor with the characteristics of maximum concentricity of 10㎛ and short driving time.
It operates smoothly in extreme environments such as high temperature, dust and dirt. The unique heat emission minimizing design makes it possible to maintain a high degree of accuracy at all times.
1PH8 Spindle Motor
03 Servo TurretHigh speed, High Accuracy, Highly Reliable Servo Turret L280 Series
TurretThe L280 series has a high performance AC servo motor and 3-piece coupling attached which enhances its machining reliability. Powerful hydraulic tool clamping minimizes tool tip deviation due to load, which enhances heavy duty cutting ability.
◉ Number of Tools : 10EA
◉ Tool Size (O.D/I.D)
□25/Ø50 (□1″/Ø1.9″)
◉ Indexing Time :0.3sec/step
L280
◉ Number of Tools : 12EA
◉ Tool Size (O.D/I.D)
□25/Ø50 (□1″/Ø1.9″)
◉ Indexing Time :0.3sec/step
L280LM
08+
09
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Turret
Mill Tool HolderMachining capability is increased with the addition of a straight milling head, which can remove material from the side of the workpiece, and an angular milling head, which can perform I.D. operations.
Also, various types of millihg tools such as drill, tap, endmill etc. can be used and this increases machining productivity and efficiency.
L280LM applies VDI method which provides a fast and accurate way of affixing tools to the turret.
◉ Output (Max./Cont.) : 5.5/3.7 kW (7.4/5 HP)
◉ Speed : 4,000 rpm
◉ Collet size :Ø20 (Ø0.8″) (eR32) ◉ Type :VDi40
Angular Milling HeadStraight Milling Head
Mill Turret (VDI)
O.D Cutting Drilling
Face Cutting End Milling
I.D Cutting I.D Threading
O.D Hole Drilling Ball-End Milling
Machining Variation
Sample Workpiece
Machine Monitoring
Energy SavingIntelligent Machining
Easy Programming
HW-MMS HW
-ESS
HW-DPRO T/TM
User Friendly
HW-TM
HYUNDAI WIA Smart System for CNC Turning Center
User Convenience
HW-eDNC
HW-MCG
HW-PGi F (HYUnDAiWiAProgrammingGuideiforFanucSystem)(StandardwhenapplyingFAnUC32i)
Realistic 3D solid animationProgramming simulation
Example of easy programmingEasy programming interactively
without code
Engraving CycleProgramming with only entering text by
controlling C-axis
04 Smart SystemSoftware for Smart Operating and MachiningL280 Series
10+
11
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Faster processing and enhanced accuracy in are possiblethrough the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.
HYUNDAI WIA Smart System
HW-TMHYUNDAIWIAToolMonitoring
A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.
(FANUC)
HW-DPRO T/TMHYUNDAIWIADialoguePROgramTurn/TurnMill
Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)
HW-MMSHYUNDAIWIAMachineMonitoringSystem
This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple machines and the progress of processing on a real time basis.
HW-ESSHYUNDAIWIAEnergySavingSystem
An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.
(FANUC)
HW-eDNCHYUNDAIWIAethernetDirectNumericalControl
This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.
HW-MCGHYUNDAIWIAMachineGuidance
Software that offers operation, maintenance, management monitoring and various user friendly features.
(FANUC)
USB Port (HWFANUCiSeries&SIEMENS828D)Convenience is increased when inputting and outputting program. The USB port is available in addition to the former input output methods such as CF memort card and LAN.
DIFFERENTIATED CAPABILITIES, INTEGRATED ENGINEERING PERFECTLY INTERLINKEDSIEMENS 828D is a latest model CNC. It is designed for horizontal/vertical all-purpose equipments.
Its 80-bit control reduces processing time and increases productivity. The 828D is easy to maintain and run, with its easy setup functions.
• Dialogue-type programming, simple and convenient
• Effective specifications for small quantity batch production
• Step-by-step operation possible without knowledge of the DIN/ISO code
Shop Turn
• 3D confirmation of the completed processing configuration of the NC program is possible.
•Offers standards for 2D simulation.• Possible to confirm the simulation of the
NC grogram during processing.
3D Simulation
• Easy to install/uninstall an option (Ex : barfeeder and chip conveyor, etc.)
• Possible to install in one motion without revision of individual perimeters.
• A spate list is unnecessary as option items are indicated with letters.
Easy Extend
Easy input/output of a program is possible as a USB memory card, a CF memory card and LAN can all be used.
RJ 45 Ethernet
USB 2.0
Compact Flash Card
Variable Communication Port
If the ISO Dialect (G291) is ordered, JIS-based G-code programs can be used. (Standard)
SIEMENS Technology SIEMENS Communication Function
ISO CodeProgramming
12+
13
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SIEMENS Convenience Function SIEMENS Easy Programming
• Easy calculation (automatic and manual) of the offset values of the installed equipment
• Automatic input of the measured offset values of equipment into the equipment list
Easy Tool Measuring
• Supports the function of work offset calculation
• Automatic application of the measured work offset value as the activated work offset
Work Offset Measuring
• Real time monitoring of PLC programs is possible. Supports the “search” and “cross reference” functions.
• Real time verification of NC variables and PLC interface
• Input/change of the values of variables
Real Time PLC Monitoring
• Program can be re-started from a particular location without editing the processing program.
• Provides safety to the user.
Block Searching
• A maximum of 500 alarms can be stored. • The entire alarm log can be stored as a
data file in the NC • The overall alarm history can be checked
through the alarm log.
Alarm Log
•Use of cycle program minimizes program capacity. • When cycle variables are input, graphic images
are provided. • Tool path and simulation of completed cycle
program are available. • Various configurations can be processed using cycles.
• Letters can be processed on products by establishing a plane and inputting letters.
• Letter size/angle/location/direction can be designated.
• Capital and small letters of English can be processed.
Program Guide SimpleProgram,HighProductivity
Engraving CycleSimpleLetterProcessingisPossible.
Controller
Parts ConveyorThe parts conveyor transfers the finished workpiece unloaded by the parts catcherfor user convenience.
Long Type 3m (118.1″)Max load processing capa. Ø42 (1.7″)Shot Type 1.5m (59.1″)Max load processing capa. Ø65 (2.6″)
Bar Feeder System
Bar Feeder Bar feeder system enables automationwhich leads to efficiency improvement.
RoundBarMaterial
Bar Feeder Machining Parts Catcher Parts Conveyor
Bar Feeder Process
05 User ConvenienceVarious Devices for User Convenience
L280 Series
Gantry Loader System
Raw Material In Work Stocker 1st Machining
End Product Out Work Stocker 2nd Machining
The high speed gantry loaders and the work stocker allow the implementation of automation cells. This enables flexible machining proess and productivity enhancement. Optimization of the installation space is also possible.
Gantry Loader Machining Process
Turn Over
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Optional
14+
15
L280 L280L L280LM ● ● ● ● ● ● ○(CE:●) ○(CE:●) ○(CE:●) ● ● ● ☆ ☆ ☆
● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ● ○ ○ ○ ● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ● ● ● ● ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ○ ○ ○ ● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ●
● ● ●
☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ☆ ☆ ☆ ☆ ☆ ☆
Door Inter-LockTotal Splash GuardChuck hydraulic pressure maintenance interlockBack Spin Torque Limiter (BST:FANUC)Torque Limiter Electric DeviceCall LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPGSpindle Load Meter(LED Type)Spindle Speed Meter(LED Type)Work CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit Breaker
ABS Encoder
AVR (Auto Voltage Regulator)TransformerAuto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)EnvironmentAir Conditioner
DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)workpusher (Spring type)Extra M-Code 4eaAutomation Interface
I/O Extension (IN & OUT)
Parts CatcherTurret Work Pusher (For Automation)Parts ConveyorHyd. DeviceStandard Hyd. Cylinder
Standard Hyd. Unit
S/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM
1Color : ■3Color : ■■■3Color : ■■■B
FANUCSIEMENSFANUCSIEMENSDigitalDigitalDigital6ea9ea
FANUCSIEMENS
30kVA
TACOSMC
X axisZ axis
FANUCSIEMENS
16Contact32ContactMain SP.
Hollow35bar (507.6 psi)/ 11ℓ (2gal)
Need Munsel No.
Standard & Optional
Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside Stopper5° IndexCs-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderDodecagon TurretMill TurretStraight Milling Head (Axial)Angular Milling Head (Radial)Straight Milling Head (Axial)Angular Milling Head (Radial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockBuilt in Tail StockProgramable Tail StockManual Type Steady Rest Manual Type Hyd. Steady RestStandard Live Center (Tail Stock : Standard)High Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantThrough Spindle Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunThrough Spindle Air Blow (Only for Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)Coolant ChillerChip Disposal
Coolant Tank
Chip Conveyor Hinge/Scraper(Tank Position/Chip Disposal) HingeSpecial Chip Conveyor (Drum Filter)
Chip Wagon
10″12″10″12″
RadialCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type
For Out-Dia
0.4Bar (5.8psi)1.5Bar (21.7psi)14.5Bar (210.2psi)20Bar (290psi)
180ℓ(47.5 gal)200ℓ(52.8 gal)Front (Right)Front (Rear)
Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized
Spindle & Chuck Safety Device
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
L280 L280L L280LM ● ● ● ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ● ● ○ ○ ○ ☆ ☆ ☆ ○ ○ - ☆ ☆ ● ○(CE:●) ○(CE:●) ○(CE:●) ○ ○ ○ ● ● ● ○ ○ ● - - ● - - ● - - ● - - ○ - - ○ ● ● ● ● ● ● ○ ○ ○ ○ ○ ○ ☆ ☆ - - - ☆ ● ● ● ○ ○ - ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ● ● ● ☆ ☆ ☆ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ● ● ● ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ - - - ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● - - - ● ● ○ ○ ○ ○ - - ☆ ☆ ☆
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
☆ ☆ ☆
Specifications are subject to change without notice for improvement.
SPECIFICATIONS
unit : mm(in)External Dimensions
1309
(51.
5)42
3(1
6.6)
1732
(68.
2)
1732
(68.
2)13
29.5
(52.
3)78 (3
)
1000
(39.
3)90
0(35
.4)
1813(71.3)
430(17) 1302(51.2) 1329.5(52.3)
1,99
5(78
.5)
300(11.8)
3010(118.5) 1258(49.5)
165(6.5)
802(31.5) 882(34.7) 888(34.9) 272(10.7)
DOOR OPEN760(30)
1200
(47.
2)
R500R500
1732
(68.
2)
DOOR OPEN760(30)
1115(43.9) 882(34.7) 1176(46.3) 497(19.5)
300(11.8)
3670(144.4) 1307(51.5)
4977(196)
1900
(74.
8)
391(15.4)
1341(72.8)
1812(71.3)1,812(71.3)
1200
(47.
2)
L280
16+
17
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
unit : mm(in)External Dimensions
SPECIFICATIONS
1309
(51.
5)42
3(1
6.6)
1732
(68.
2)
1732
(68.
2)13
29.5
(52.
3)78 (3
)
1000
(39.
3)90
0(35
.4)
1813(71.3)
430(17) 1302(51.2) 1329.5(52.3)
1,99
5(78
.5)
300(11.8)
3010(118.5) 1258(49.5)
165(6.5)
802(31.5) 882(34.7) 888(34.9) 272(10.7)
DOOR OPEN760(30)
1200
(47.
2)
R500R500
1732
(68.
2)
DOOR OPEN760(30)
1115(43.9) 882(34.7) 1176(46.3) 497(19.5)
300(11.8)
3670(144.4) 1307(51.5)
4977(196)
1900
(74.
8)
391(15.4)
1341(72.8)
1812(71.3)1,812(71.3)
1200
(47.
2)
L280L/LM
unit : mm(in)Tooling System
18+
19
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
10 Stations
VDI 4012 Stations
StraightMill Holder
O.D Holder
I.D Holder
U-Drill Holder
I.D Holder
O.D Holder
Facing Holder
Milling Collet
Outside
Grooving
Threading
Boring BarSocket
Boring Bar
Drill
Tap
Endmill
Center Drill
Drill
Reamer
Facing HolderO.D Tool
Boring Bar
Drill
U-Drill
AngularMill Holder
Plug
Boring BarSocket
U-DrillSleeves
L280/L
Right/Left
Single
Standard
Standard
ø16 (5/8″)
ø20 (3/4″)
ø25 (1″)
ø32 (1 1/4″)
ø40 (1 1/2″)
MT 1 x MT 2
MT 2
MT 3
MT 4
O.D Holder
Facing Holder
I.D Holder
Straight Mill Holder
Angular Mill Holder
Boring
Drill
ER Collet
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM L280/L
1
1
3
-
-
-
1
-
1
-
-
1
1
1
-
Tooling Parts Detail
Specifications are subject to change without notice for improvement.
unit : mm(in)Tooling System10 Stations
VDI 4012 Stations
StraightMill Holder
O.D Holder
I.D Holder
U-Drill Holder
I.D Holder
O.D Holder
Facing Holder
Milling Collet
Outside
Grooving
Threading
Boring BarSocket
Boring Bar
Drill
Tap
Endmill
Center Drill
Drill
Reamer
Facing HolderO.D Tool
Boring Bar
Drill
U-Drill
AngularMill Holder
Plug
Boring BarSocket
U-DrillSleeves
L280LM
SPECIFICATIONS
Right/Left
Single
Standard
Standard
ø16 (5/8″)
ø20 (3/4″)
ø25 (1″)
ø32 (1 1/4″)
ø40 (1 1/2″)
MT 1 x MT 2
MT 2
MT 3
MT 4
O.D Holder
Facing Holder
I.D Holder
Straight Mill Holder
Angular Mill Holder
Boring
Drill
ER Collet
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM L280LM
4
1
3
2
2
1
1
1
1
1
1
1
1
-
1 Set
Tooling Parts Detail
Specifications are subject to change without notice for improvement.
unit : mm(in)Interference
Ø218.8 (Ø8.6)
(MAX FACING DIA.)Ø30
0 (Ø11
.8)
(MAX TURNIN
G DIA.)
Ø650 (Ø25.6)
MAX SWING
(STA
ND
ARD
MAC
HIN
ING
DIA
.)
Ø25
4 (Ø
10)
Ø218.8 (Ø8.6)
(MAX BORING DIA.)
Ø512.45
(Ø20.2)
Ø290 (Ø11.4)
MAX.FACING DIAMAX.TURNING DIA
Ø595.23 (Ø23.4)MAX.SWING
Ø550 (Ø21.7)
Ø260
(Ø10.2)Ø410 (Ø16.4)
L280/L
L280LM
20+
21
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
unit : mm(in)Tooling Travel Range
A 7 (0.3)
96(3.7)
40(1.6)
120 (4.7)
166(6.5)
A98(3.9)
75(3)
20(0.8)
53(2.1)
20(0.8)
53(2.1)
A48(1.9)
125(4.9)
B123(4.6)
42.1(1.7)
45(1.7)
123(4.6)
42.1(1.7)
45(1.7)
123(4.6)
42.1(1.7)
45(1.7)
Ø25
4(10
)
220
(8.6
)
220
(8.6
)22
0 (8
.6)
200
(7.8
)20
(0.8
)
20 (0.8
)25 (1
)
40 (1.6
)20
9 (8
.2)
20 (0.8
)58 (2.3
)
31 (1.2
)11
(0.4
)
205
(8.1
)85 (3.3
)15 (0.6
)25 (1
)
Ø25
4 (Ø
10)
Ø25
4 (Ø
10)
L280/L
◆ A - L280 : 750 (29.5) L280L : 1,100 (43.3)◆ B - L280 : 570 (22.4) L280L : 920 (36.2)
SPECIFICATIONS
unit : mm(in)Tooling Travel Range
42(1.6)
99(3.9)
42(1.6)
42(1.6)
184.5(7.3)
690 (27.1) 330 (13)
690 (27.1) 330 (13) 35(1.4)
120.5(4.7)
1020(40)
(Stroke)
42(1.6)
154.5(6)
1020(40)
(Stroke)
1020(40)
(Stroke)
1020(40)
(Stroke)
75(2.9)
132(5.2)
330 (13) 87.5(3.4)
690 (27.1)
330 (13) 74(2.9)
690 (27.1)
120 (4.7)(Quill)
97(3.8)
899.5(35.4)
(T/S Stroke)
Ø25
4 (Ø
10)
Ø25
4 (Ø
10)
Ø25
4 (Ø
10)
Ø50
(Ø1.
9)
Ø25
4 (Ø
10)
192
(7.5
)
220
(8.6
)
130
(5.1
)95 (3.7
)35 (1.4
)
70 (2.7
)30 (1.2
)19
0 (7
.5)
220
(8.6
)
5(0
.2)
25 (1)
45 (1.7
)
150
(5.9
)
220
(8.6
)
190
(7.5
)30 (1.2
)
5(0
.2)
220
(8.6
)
28 (1.1
)
3(0
.1)
L280LM
22+
23
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
Specifications are subject to change without notice for improvement.
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity
Chuck Size
Spindle Bore
Spindle Speed (rpm)
Motor (Max/Cont.)
Torque (Max/Cont.)
Spindle Type
Spindle Nose
C-axis Indexing
Travel (X/Z/B)
Rapid Traverse Rate(X/Z/B)
Slide Type
No. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Torque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
CAPACITY
FEED
TANkCAPACITY
SPINDlE
TURRET
lIvE TOOl
TAIl STOCk
MACHINE
NC
POWERSUPPlY
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
kW(HP)
N.m(lbf.ft)
-
-
deg
mm(in)
m/min(ipm)
-
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m(lbf.ft)
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gal)
ℓ(gal)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
ITEM L280LL280 L280LM
Ø590(23.2″) Ø650(25.6″)
Ø375(14.8″) Ø415(16.3″)
Ø410(16.1″) Ø300(11.8″)
720(28.3″) 1,070(42.1″) 1,000(39.4″)
Ø76(3″)
Ø254(10″)
Ø95(3.7″)
3,000[3,000] 3,500[3,500]
22/18.5(30/25) 22/18.5(30/25)
[33.6/28(45/37.5)] [33.6/28(45/37.5)]
729.5/613.5(538.0/452.5) 493.2/414.7(363.7/305.8)
[641.4/534.5(473.0/394.2)] [433/360.8(3193/266.1)]
BELT
A2-8
- 0.001˚
220/750(8.7″/29.5″) 220/1,100(8.7″/43.3″) 220/1,020(8.7″/40.2″)
25/30(984.3/1,181)
LM GUIDE
10 12
□25(1″)
Ø50(2″)
0.3
- 5.5/3.7(7.3/5)
- 4,000
- 35.0/23.5(25.8/17.3)
- Ø20(0.8″)ER32
- VDI40
MT#5
Ø100(3.9″)
120(4.7″)
570(22.4″) 920(36.2″)
180(47.5) 200(52.8)
1.8(0.5)
24 27
Over 25
220/60(200/50)
3,010×1,812(118.5″×71.3″) 3,670×1,812(144.5″×71.3″) 3,670×1,812(144.5″×71.3″)
1,950(76.8″)
6,100(13,448) 8,000(17,637) 8,100(17,857)
HYUNDAIWIAFANUCiSeries[FANUC32i-A][SIEMENS 828D]
Specifications [ ] : Option
SPECIFICATIONS
SIEMENS 828DControl function
Max. configuration of Axis
Max. configuration of Axis and sp.
Least Command/inputFeed functionFeedrate OverrideRapid Traverse OverrideAcceleration with jerk limitationProgrammable accelerationFollow-up modeMeasuring system 1 and 2, selectableSeparate path feed for corners and chamfersTravel to fixed stopSpindle functionSpindle OverrideSpindle OrientationSpindle Speed LimitationRigid TappingInterpolation functionLinear interpolation AxisCircle via center point and end pointCircle via interpolation pointHelical interpolationUniversal interpolator NURBS(non-uniform rational B splines)Continuous-path mode with programmablerounding clearanceTool functionTool Radius Comp.Zero Offset (G54, G55, G56, G57 ,G58, G59)Programmable Zero OffsetTool managementDisplayCRT / MDISCREEN SAVERManual OperationManual Handle/Jog FeedRepositionReference ApproachSpindle ControlAuto OperationSingle BlockFeed HoldOptional Block SkipMachine LockDry RunSimulationDiagnosis functionAlarm DisplaySpindle Load/rpm MeterPLC status/LAD displayProgram function
Part Program Storage Length
Program NameSubroutine CallAbsolute/incremental CommandScaling, ROTInch / Metric ConversionConversational Cycle ProgramBlock SearchVariable Program (Macro)Read / Write System VariableBackGround EditingMiscellaneous FunctionsLable SkipProgram Stop/EndLookahead , Jerk LimitationFeed &forward control
3 Axis(MS / SY exception)4 Axis(MS / SY machine only)6 Axis(MS / SY exception)8 Axis(MS / SY machine only)0.0001mm / 0.00001inch
0 - 120%F1, 5, 25/50, 100%
50% - 120%
Max. 4 axis
100 EA
10.4˝ Color LCDNone
Ref 1, 2 ApproachStart, Stop, Rev, Jog, Ort.
(2 dimensional)
3MB (MS / SY exception) PPU26x.x5MB (MS / SY machine only) PPU28x.x23 digit(7 level) G90 - G91
(22 Machine)
M - Code
M00, M01, M02, M30
Program functionISO Dialect Interpreter(G291) (Fanuc Program exe)
Maximum number of tools/cuttings
Number of levels for skip blocks 1Protection FunctionEmergency StopOver TravelContour MonitoringProgram ProtectionAutomation Support Fun.Actual Speed Display(Monitor)Tool Life ManagementWork Count Functionlanguage Function
Two Language switchable
Data TransferRS 232C I/F / EthernetUSB Memory Stick & CF Card
OptionShop Turn3D SimulationDRF offsetTeach -inNumber of levels for skip blocks 8TRACYL (Cylinder interpolation)TRANSMIT (Pole coordinate command)Sister ToolA,B,C SPLINE INTERPOLATIONRCS HOST (Remote Control)Simultaneous Recording (real time monitoring)Analysis of Internal Drive ValuesNetwork Drive Management
Figures in inch are converted from metric values.Specifications are subject to change without notice for improvement.
128/256 (MS / SY exception) PPU26x.x256/512 (MS / SY machine only) PPU28x.x
Soft Limit & Hard O.T
(Time, Parts)(Internal)
(6EA)Chinese Traditional, Czech, Danish, Dutch, Finnish, Hungarian, Japanese, Korean, Polish, Russian, Swedish, Portuguese, Turkish
24+
25
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
CONTROLLER
HYUNDAI WIA FANUC i SeriesControl function / Screen display
Control axis number
Simultaneous control axis number
Min. input unit
Min. increment
High speed HRV controlInch/metric conversionInterlockMachinelockEmergency stopStroke check 1Stroke check 2Stroke check 3Follow upSub off
Backlash compensation
Position switchFault load detectionHigh resolution transfer control (HRM)LCD / MDIOperation Auto handling (memory)MDI handlingSearch functionProgram re-startPreventive function for mis-handlingBuffer registrationProgram check functionSingle blockFeed functionManual jog feedManual Handle ScaleFeed commandFeed overrideJog overrideRapid transfer overrideOverride releaseTransfer/minute, transfer/rpmProgram input and interpolation function
Nano interpolation
Dwell functionThreading retractVariable lead threadingReturn of first zero pointReturn check of zero pointReturn of second zero pointProgram stop/overTape codeOptional block skipMax. program enter unitProgram numberAbsolute, incremental programmingDecimal number enteringPlain selectionWork coordinate selectionManual absoluteDrawing dimension direct input programmingG code systemProgrammable data inputSub program callCustom macro BCustom macro variable additionMultiple repetitive cyclesMultiple repetitive cycles ⅡLathe fixed cycleManual guide i
Max. 4 AxisX, Z axisX, Z, C axis (M type machine)X, Z, Y, C axis (Y type machine)X, Z, B, C axis (MS type machine)2 axis/straight, arc interpolation(Max. 4 Axis)X, Z, Y, B axis : 0.001mm (0.0001″)C axis : 0.001 deg.X, Z, Y, B axis : 0.001mm (0.0001″)C axis : 0.001 deg.
G20 / G21Each axis / All axisFull axis
Over-travel
+/- 0~9999 Pulse(Rapid traverse & cutting feed)
Back spin torque limiter (BST)
8.4″ Color LCD
Sequence, Program
Dry run, Program check
Rapid transfer, Jog, Handlex1, x10, x100Direct command for F code feed0~200% (10% units)0~2,000 mm/min [79 ipm]F1, F5, F25 / F50, F100%
Positioning/Straight/Arc(G00/G01/G02/G03)G04, 0~9999.9999 sec
G28, manualG27G30M00, M01 / M02, M30EIA / ISO 1 EA+/- 9999.9999″O+4 digit number
G17, G18, G19G52 to G59“ON” fixedIncluded chamfering / Corner R`AG1010 Steps
#100 to #199, #500 to #999
Interactive program
Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset quantityTool offsetTool nose radius compensationConfiguration/wear compensationDirect input of measuring tool compensation BTool life managementData input, output and editing functionInput/output interfaceMemory card input and outputProgram storing capacityProgram registration quantityMemory lockBackground editAdditional expandable editScreen, diagnosis and setting functionSelf diagnosis functionHistoric screenHelp functionOutside messageOperation time/counter displayActual sp. speed, T code displayActual machining feed rate displayHandling monitor screenGraphic screenSpindle/servo setting screenLanguagesLCD screen saveAuto data backupFunction according with machine specificationCs contouring functionStored pitch error compensationPole coordinate commandCylinder interpolationDrill fixed cycleSp. positioning expandableMain sp. synchronization controlTorque controlY axis offsetAngular axis control
OptionHigh speed EthernetOptional block skip3rd & 4th reference point returnG code systemProgram storing capacityPolygon turningHelical interpolationDynamic graphic display8 level data protection functionManual guide i
Figures in inch are converted from metric values.Specifications are subject to change without notice for improvement.
M4 digit number
S + 4 digit number, binary number outputG96, G9750% ~ 150% (10% unit)
T2 + 264 pairs
G40, G41, G42
RS232C
1280m/512kbMax. 500 programs
NC program copy, move, change
Alarm and handling screen
Rod meter light
Selection of random 5 EAScreen saver
Turn millTurn millTurn millTurn millTurn millTurn mill, Sub spindleSub spindleSub spindleY type machineY type machine
100 Mbps (Option board is required)9 EA
B / C512 Kbyte
Interactive program (10.4″Color LCD)
CONTROLLER
26+
27
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
CONTROLLER
Figures in inch are converted from metric values.Specifications are subject to change without notice for improvement.
FANUC 32i-AAxis control / Display unit
Controlled axes
Simultaneous controllable axesLeast input increment
Least command increment
High speed HRV controlInch / Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Stored stroke check 2Stored stroke check 3Follow-upServo-off
Backlash compensation
Position switchUnexpected disturbance torque detectionHigh resolution transfer control (HRM)LCD / MDIOperationAutomatic operation (memory)MDI operationSearch functionProgram restartWrong operation preventionBuffer registerProgram check functionSingle blockFeed functionsManual jog feedManual handle feedrateFeed commandFeedrate overrideJog overrideRapid traverse overrideOverride cancelFeed per minute / rotationProgram input & interpolation functions
Nano interpolation
DwellThread retractVariable lead threading1st reference point returnReference point return check2nd reference point returnProgram stop / EndTape codeOptional block skipMaximum programmable dimensionsProgram numberAbsolute and incremental programmingDecimal point inputPlane selectionWork coordinate system selectionManual absoluteDirect drawing dimension programmingG code systemProgrammable data inputSub program callCustom macro BAddition of custom macro common variable
Max. 4 axes are availableX, Z axesX, Z, C axes (M type machine)X, Z, Y, C axes (Y type machine)X, Z, B, C axes (MS type machine)2axes / Linear and circular (Max. 4axes)X, Z, Y, B axes : 0.001 mm (0.0001”)C axis : 0.001 degX, Z, Y, B axes : 0.001 mm (0.0001”)C axis : 0.001 deg
G20 / G21Each axis / All axesAll axes
Over-travel
+/- 0~9999 pulses (Rapid traverse & cutting feed)
Back-spin torque limiter (BST)
10.4″ Color LCD
Sequence, program
Dry run., program check
Rapid, jog, handlex1, x10, x100F code feedrate direct command0~200 % (10% units)0~2,000 mm/min[79 ipm]F1, F5, F25/F50, F100%
Positioning / Linear / Circular (G00 / G01 / G02, G03)G04, 0~9999.9999 sec
G28, manualG27G30M00, M01 / M02, M30EIA / ISO1 ea+/- 9999.9999″O+4 digits
G17, G18, G19G52 to G59“ON” FixedIncluded chamfering / Corner R`AG1010 folds nested
#100 to #199, #500 to #999
Program input & interpolation functionsMultiple repetitive cyclesMultiple repetitive cycles ⅡCanned cycles for turningManual guide iSub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset pairsTool offsetTool nose radius compensationDirect input of measured toolcompensation value BTool life managementData in/output & editing functionsReader / Puncher interfaceMemory card input/outputPart program storage lengthNumber of registrable programs expansionMemory lockBackground editingExtended part program editionDisplay, diagnosis & setting functionsSelf-diagnosis functionHistory displayHelp functionExternal messageRun hour / Parts count displayDisplay of actual spindle speed and T codeActual cutting feedrate displayOperating monitor screenGraphic displaySpindle / Servo setting screenSelection of 5 optional languageErase CRT screen displayAutomatic data backupFunctions according to machine specificationCs contouring controlStored pitch error compensationPolar coordinate interpolationCylindrical interpolationCanned cycles for drillingspindle orientation expansionSpindle synchronous controlTorque controlY axis offsetAngular axis control
OptionHigh speed EthernetOptional block skip3rd & 4th reference point returnG code systemPart program storage lengthPolygon turningHelical interpolationDynamic graphic displayProtection of data at 8 levels
Interactive programming
M4 digits
S4 digits, binary outputG96, G9750% to 150% (10% units)
T2 + 264 pairs
G40, G41, G42
RS232C
256 KbyteMax. 500 programs
Copy, move, change of NC program
Alarm & operation display
Rod meter light
Screen saver
Turn millTurn millTurn millTurn millTurn millTurn mill, Sub spindleSub spindleSub spindleY type machineY type machine
100 Mbps (Option board is required)9 ea
B / C512 Kbyte
GLOBAL NETWORK
28+
29
L2
80 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Changwon Technical Center / R&D Center / Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533)TEL : +82 55 280 9114 FAX : +82 55 282 9680
Uiwang Technical Center / R&D Center37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082)TEL : +82 31 596 8209 Fax : +82 55 210 9804
HeADqUARTeR
OVeRSeAS OFFICeSHYUNDAI WIAMachine Tools America 265, Spring Lake Drive, Itasca, IL, 60143
TEL : +1 201 489 2887 FAX : +1 201 489 2723
Jiangsu HYUNDAI WIANo.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China
TEL : +86 512 5672 6808FAX : +86 512 5671 6960
Chengdu OfficeNO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China 610041
TEL : +86 28 8665 5550FAX : +86 28 8666 2985
HYUNDAI WIAMachine Tools europe Kaiserleipromenade 5, D-63067 Offenbach, Germany
TEL : +49 69271 472 701FAX : +49 69271 472 719
Hyundai WIA Machine Tools ChinaShanghai Office1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233
TEL : +86 21 6427 9885FAX : +86 21 3431 0376
Wuhan Office Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, China 430056
TEL : +86 27 5956 3256~7FAX : +86 27 5952 3258
Raunheim Service CenterRaunheim R&D CenterKelsterbacher Strasse 51, 65479 Raunheim, Germany
TEL : +49 6142 9256 0 FAX : +49 6142 834 100
Beijing Office13 Floor Building B Zhonghangji square, No.15 Ronghua South Road, Yizhuang Economic and Technological Development Zone District, Beijing, China 100176
TEL : +86 10 8453 9850~2FAX : +86 10 8453 9853
qingdao OfficeRoom 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao, China 266061
TEL : +86 532 8667 9333~5FAX : +86 532 8667 9338
Inida Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, IndiaTEL: +91-44-3290-1719
Guangzhou OfficeRoom 311, Unit 1-3, Poly Tal Tu Wun, Hanxi Avenue, Panyu District, Guangzhou, China 511400
TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597
Shenyang OfficeRoom 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013
TEL : +86 24 3228 6640FAX : +86 24 3228 6642
2015-12 003.004 ENG
Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
Tel +82 55 280 9206, 9299 Fax +82 55 210 9804
machine.hyundai-wia.com
Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 31 593 8173
l280 Movie Cam Shaft