l Refrigerant Leak Detector E14 Refrigerant Leak Detector ... · The Automatd Logic Refrigerant...

1
The Automatd Logic Refrigerant Leak Detector measures the amount of R404A, R410A, R22, and/or R134A present. The Leak Detector measures leaks and spills; it is not intended for critical ppm measurements. Voltage trip levels for R22, R404A, R410A, or R134 leaks and spills are shown in the table. The sensor is temperature compensated for an accurate and reliable measurement. Features Measures All Modern Refrigerants Measures Leaks and Spills Voltage Output Cost Effective Part Number Description NSB-RLD-A Refrigerant Leak Detector in a Box Enclosure Specifications Power: 9 to 40 VDC at 120mA max 19 to 32 VAC at 5 VA Output Impedance: 680 Ohms Operating Environment: 0 to 70º C (32 to 140º F) Output Voltage for Specific Refrigerants: Next level building automation engineered to help you make smart decisions. 1150 Roberts Boulevard, Kennesaw, Georgia 30144 770-429-3000 Fax 770-429-3001 | www.automatedlogic.com © Automated Logic 2017 Refrigerant Leak Detector Accessory for HVAC/R The WebCTRL ® building automation system gives you the ability to understand your building operations and analyze the results. The WebCTRL system integrates environmental, energy, security and safety systems into one powerful management tool that allows you to reduce energy consumption, increase occupant comfort, and achieve sustainable building operations. Our web-based platform allows building managers to control and access information about their HVAC, lighting, central plant and critical processes on premises or remotely at any time of day. 02012018 Refrigerant Leak Detector in a Box Enclosure Refrigerant Voltage Trip Level R22 2.5 VDC @ 500 ppm R404A 4.5 VDC @ 500 ppm R410A 2.5 VDC @ 500 ppm R134A 1.8 VDC @ 500 ppm

Transcript of l Refrigerant Leak Detector E14 Refrigerant Leak Detector ... · The Automatd Logic Refrigerant...

Page 1: l Refrigerant Leak Detector E14 Refrigerant Leak Detector ... · The Automatd Logic Refrigerant Leak Detector measures the amount of R404A, R410A, R22, and/or R134A present. The Leak

The Automatd Logic Refrigerant Leak Detector measures the amount of

R404A, R410A, R22, and/or R134A present. The Leak Detector measures

leaks and spills; it is not intended for critical ppm measurements. Voltage

trip levels for R22, R404A, R410A, or R134 leaks and spills are shown in

the table. The sensor is temperature compensated for an accurate and

reliable measurement.

Features

• Measures All Modern Refrigerants

• Measures Leaks and Spills

• Voltage Output

• Cost Effective

Part Number Description

NSB-RLD-A Refrigerant Leak Detector in a Box Enclosure

Specifications

Power:

9 to 40 VDC at 120mA max

19 to 32 VAC at 5 VA

Output Impedance:

680 Ohms

Operating Environment:

0 to 70º C (32 to 140º F)

Output Voltage for Specific Refrigerants:

Next level building automation engineered to help you make smart decisions.

1150 Roberts Boulevard, Kennesaw, Georgia 30144770-429-3000 Fax 770-429-3001 | www.automatedlogic.com© Automated Logic 2017

Refrigerant Leak DetectorAccessory for HVAC/R

The WebCTRL® building automation system gives you the ability to understand your building operations and analyze the results. The WebCTRL system integrates environmental, energy, security and safety systems into one powerful management tool that allows you to reduce energy consumption, increase occupant comfort, and achieve sustainable building operations. Our web-based platform allows building managers to control and access information about their HVAC, lighting, central plant and critical processes on premises or remotely at any time of day.

02012018

E14 Air Quality &Combination Sensors

Manufactured by Building Automation Products, Inc., 750 N. Royal Ave., Gays Mills, WI 54631 USAPh:+1-608-735-4800 • Fax:+1-608-735-4804 • E-mail:[email protected] • Web:www.bapihvac.com

Automated Logic and the Automated Logic logo are registered trademarks of Automated Logic Corporation

Features & Options

Refrigerant Leak Detector

Refrigerant Leak Detector in a BAPI-Box Enclosure

Specifications

l Measures All Modern Refrigerants

l Measures Leaks and Spills

l Voltage Output

l Cost Effective

Ordering Information/Part Numbers

Rev. 01/12/11

ALC/RLD ........ Refrigerant Leak Detector in a BAPI-Box Enclosure

The BAPI Refrigerant Leak Detector measures the amount of R404A, R410A, R22 and/or R134A present. The Leak Detector measures leaks and spills; it is not intended for critical ppm measurements. Voltage trip levels for R22, R404A R410A or R134 leaks and spills are shown in the table. The sensor is temperature compensated for an accurate and reliable measurement.

Power: 9 to 40 VDC at 120mA max 19 to 32 VAC at 5 VA

Output Impedance: 680 Ohms

Ambient Temperature: 0 to 70º C (32 to 140º F)

Output Voltage for Specific Refrigerants:

Refrigerant Voltage Trip LevelR22 2.5 VDC @ 500 ppmR404A 4.5 VDC @ 500 ppmR410A 2.5 VDC @ 500 ppmR134A 1.8 VDC @ 500 ppm

Refrigerant Leak Detectorin a Box Enclosure

E14 Air Quality &Combination Sensors

Manufactured by Building Automation Products, Inc., 750 N. Royal Ave., Gays Mills, WI 54631 USAPh:+1-608-735-4800 • Fax:+1-608-735-4804 • E-mail:[email protected] • Web:www.bapihvac.com

Automated Logic and the Automated Logic logo are registered trademarks of Automated Logic Corporation

Features & Options

Refrigerant Leak Detector

Refrigerant Leak Detector in a BAPI-Box Enclosure

Specifications

l Measures All Modern Refrigerants

l Measures Leaks and Spills

l Voltage Output

l Cost Effective

Ordering Information/Part Numbers

Rev. 01/12/11

ALC/RLD ........ Refrigerant Leak Detector in a BAPI-Box Enclosure

The BAPI Refrigerant Leak Detector measures the amount of R404A, R410A, R22 and/or R134A present. The Leak Detector measures leaks and spills; it is not intended for critical ppm measurements. Voltage trip levels for R22, R404A R410A or R134 leaks and spills are shown in the table. The sensor is temperature compensated for an accurate and reliable measurement.

Power: 9 to 40 VDC at 120mA max 19 to 32 VAC at 5 VA

Output Impedance: 680 Ohms

Ambient Temperature: 0 to 70º C (32 to 140º F)

Output Voltage for Specific Refrigerants:

Refrigerant Voltage Trip LevelR22 2.5 VDC @ 500 ppmR404A 4.5 VDC @ 500 ppmR410A 2.5 VDC @ 500 ppmR134A 1.8 VDC @ 500 ppm

E14 Air Quality &Combination Sensors

Manufactured by Building Automation Products, Inc., 750 N. Royal Ave., Gays Mills, WI 54631 USAPh:+1-608-735-4800 • Fax:+1-608-735-4804 • E-mail:[email protected] • Web:www.bapihvac.com

Automated Logic and the Automated Logic logo are registered trademarks of Automated Logic Corporation

Features & Options

Refrigerant Leak Detector

Refrigerant Leak Detector in a BAPI-Box Enclosure

Specifications

l Measures All Modern Refrigerants

l Measures Leaks and Spills

l Voltage Output

l Cost Effective

Ordering Information/Part Numbers

Rev. 01/12/11

ALC/RLD ........ Refrigerant Leak Detector in a BAPI-Box Enclosure

The BAPI Refrigerant Leak Detector measures the amount of R404A, R410A, R22 and/or R134A present. The Leak Detector measures leaks and spills; it is not intended for critical ppm measurements. Voltage trip levels for R22, R404A R410A or R134 leaks and spills are shown in the table. The sensor is temperature compensated for an accurate and reliable measurement.

Power: 9 to 40 VDC at 120mA max 19 to 32 VAC at 5 VA

Output Impedance: 680 Ohms

Ambient Temperature: 0 to 70º C (32 to 140º F)

Output Voltage for Specific Refrigerants:

Refrigerant Voltage Trip LevelR22 2.5 VDC @ 500 ppmR404A 4.5 VDC @ 500 ppmR410A 2.5 VDC @ 500 ppmR134A 1.8 VDC @ 500 ppm